snprintf(name, sizeof(name), "%s/2", core->name);
printk("%s/2: ============ START LOG STATUS ============\n",
core->name);
- cx88_call_i2c_clients(core, VIDIOC_LOG_STATUS, NULL);
+ call_all(core, core, log_status);
cx2341x_log_status(&dev->params, name);
printk("%s/2: ============= END LOG STATUS =============\n",
core->name);
f->type = V4L2_TUNER_ANALOG_TV;
f->frequency = core->freq;
- cx88_call_i2c_clients(core,VIDIOC_G_FREQUENCY,f);
+ call_all(core, tuner, g_frequency, f);
return 0;
}
.radio_type = UNSET,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
+ /* Some variants use a tda9874 and so need the tvaudio module. */
+ .audio_chip = V4L2_IDENT_TVAUDIO,
.input = {{
.type = CX88_VMUX_TELEVISION,
.vmux = 0,
tea5767_cfg.tuner = TUNER_TEA5767;
tea5767_cfg.priv = &ctl;
- cx88_call_i2c_clients(core, TUNER_SET_CONFIG, &tea5767_cfg);
+ call_all(core, tuner, s_config, &tea5767_cfg);
break;
}
case CX88_BOARD_TEVII_S420:
tun_setup.type = core->board.radio_type;
tun_setup.addr = core->board.radio_addr;
tun_setup.tuner_callback = cx88_tuner_callback;
- cx88_call_i2c_clients(core, TUNER_SET_TYPE_ADDR, &tun_setup);
+ call_all(core, tuner, s_type_addr, &tun_setup);
mode_mask &= ~T_RADIO;
}
tun_setup.addr = core->board.tuner_addr;
tun_setup.tuner_callback = cx88_tuner_callback;
- cx88_call_i2c_clients(core, TUNER_SET_TYPE_ADDR, &tun_setup);
+ call_all(core, tuner, s_type_addr, &tun_setup);
}
if (core->board.tda9887_conf) {
tda9887_cfg.tuner = TUNER_TDA9887;
tda9887_cfg.priv = &core->board.tda9887_conf;
- cx88_call_i2c_clients(core, TUNER_SET_CONFIG, &tda9887_cfg);
+ call_all(core, tuner, s_config, &tda9887_cfg);
}
if (core->board.tuner_type == TUNER_XC2028) {
xc2028_cfg.priv = &ctl;
info_printk(core, "Asking xc2028/3028 to load firmware %s\n",
ctl.fname);
- cx88_call_i2c_clients(core, TUNER_SET_CONFIG, &xc2028_cfg);
+ call_all(core, tuner, s_config, &xc2028_cfg);
}
- cx88_call_i2c_clients (core, TUNER_SET_STANDBY, NULL);
+ call_all(core, core, s_standby, 0);
}
/* ------------------------------------------------------------------ */
cx88_i2c_init(core, pci);
/* load tuner module, if needed */
- if (TUNER_ABSENT != core->board.tuner_type)
- request_module("tuner");
+ if (TUNER_ABSENT != core->board.tuner_type) {
+ int has_demod = (core->board.tda9887_conf & TDA9887_PRESENT);
+
+ /* I don't trust the radio_type as is stored in the card
+ definitions, so we just probe for it.
+ The radio_type is sometimes missing, or set to UNSET but
+ later code configures a tea5767.
+ */
+ v4l2_i2c_new_probed_subdev(&core->i2c_adap, "tuner", "tuner",
+ v4l2_i2c_tuner_addrs(ADDRS_RADIO));
+ if (has_demod)
+ v4l2_i2c_new_probed_subdev(&core->i2c_adap, "tuner",
+ "tuner", v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
+ if (core->board.tuner_addr == ADDR_UNSET) {
+ enum v4l2_i2c_tuner_type type =
+ has_demod ? ADDRS_TV_WITH_DEMOD : ADDRS_TV;
+
+ v4l2_i2c_new_probed_subdev(&core->i2c_adap, "tuner",
+ "tuner", v4l2_i2c_tuner_addrs(type));
+ } else {
+ v4l2_i2c_new_subdev(&core->i2c_adap,
+ "tuner", "tuner", core->board.tuner_addr);
+ }
+ }
cx88_card_setup(core);
cx88_ir_init(core, pci);
set_tvaudio(core);
// tell i2c chips
- cx88_call_i2c_clients(core,VIDIOC_S_STD,&norm);
+ call_all(core, tuner, s_std, norm);
// done
return 0;
mutex_lock(&devlist);
cx88_ir_fini(core);
- if (0 == core->i2c_rc)
+ if (0 == core->i2c_rc) {
+ if (core->i2c_rtc)
+ i2c_unregister_device(core->i2c_rtc);
i2c_del_adapter(&core->i2c_adap);
+ }
list_del(&core->devlist);
iounmap(core->lmmio);
cx88_devcount--;
fe1->dvb.frontend->ops.ts_bus_ctrl = cx88_dvb_bus_ctrl;
/* Put the analog decoder in standby to keep it quiet */
- cx88_call_i2c_clients(core, TUNER_SET_STANDBY, NULL);
+ call_all(core, core, s_standby, 0);
/* register everything */
return videobuf_dvb_register_bus(&dev->frontends, THIS_MODULE, dev,
/* ----------------------------------------------------------------------- */
-static int attach_inform(struct i2c_client *client)
-{
- struct v4l2_device *v4l2_dev = i2c_get_adapdata(client->adapter);
- struct cx88_core *core = to_core(v4l2_dev);
-
- dprintk(1, "%s i2c attach [addr=0x%x,client=%s]\n",
- client->driver->driver.name, client->addr, client->name);
- return 0;
-}
-
-static int detach_inform(struct i2c_client *client)
-{
- struct v4l2_device *v4l2_dev = i2c_get_adapdata(client->adapter);
- struct cx88_core *core = to_core(v4l2_dev);
-
- dprintk(1, "i2c detach [client=%s]\n", client->name);
- return 0;
-}
-
-void cx88_call_i2c_clients(struct cx88_core *core, unsigned int cmd, void *arg)
-{
- if (0 != core->i2c_rc)
- return;
-
- if (core->gate_ctrl)
- core->gate_ctrl(core, 1);
-
- i2c_clients_command(&core->i2c_adap, cmd, arg);
-
- if (core->gate_ctrl)
- core->gate_ctrl(core, 0);
-}
-
static const struct i2c_algo_bit_data cx8800_i2c_algo_template = {
.setsda = cx8800_bit_setsda,
.setscl = cx8800_bit_setscl,
memcpy(&core->i2c_algo, &cx8800_i2c_algo_template,
sizeof(core->i2c_algo));
- if (core->board.tuner_type != TUNER_ABSENT)
- core->i2c_adap.class |= I2C_CLASS_TV_ANALOG;
- if (core->board.mpeg & CX88_MPEG_DVB)
- core->i2c_adap.class |= I2C_CLASS_TV_DIGITAL;
core->i2c_adap.dev.parent = &pci->dev;
strlcpy(core->i2c_adap.name,core->name,sizeof(core->i2c_adap.name));
core->i2c_adap.owner = THIS_MODULE;
core->i2c_adap.id = I2C_HW_B_CX2388x;
- core->i2c_adap.client_register = attach_inform;
- core->i2c_adap.client_unregister = detach_inform;
core->i2c_algo.udelay = i2c_udelay;
core->i2c_algo.data = core;
i2c_set_adapdata(&core->i2c_adap, &core->v4l2_dev);
/* ----------------------------------------------------------------------- */
-EXPORT_SYMBOL(cx88_call_i2c_clients);
-
/*
* Local variables:
* c-basic-offset: 8
struct v4l2_routing route;
route.input = INPUT(input).audioroute;
- cx88_call_i2c_clients(core,
- VIDIOC_INT_S_AUDIO_ROUTING, &route);
+ call_all(core, audio, s_routing, &route);
}
/* cx2388's C-ADC is connected to the tuner only.
When used with S-Video, that ADC is busy dealing with
struct v4l2_routing route;
route.input = core->board.radio.audioroute;
- cx88_call_i2c_clients(core,
- VIDIOC_INT_S_AUDIO_ROUTING, &route);
+ call_all(core, audio, s_routing, &route);
}
/* "I2S ADC mode" */
core->tvaudio = WW_I2SADC;
cx88_set_tvaudio(core);
cx88_set_stereo(core,V4L2_TUNER_MODE_STEREO,1);
}
- cx88_call_i2c_clients(core,AUDC_SET_RADIO,NULL);
+ call_all(core, tuner, s_radio);
}
unlock_kernel();
kfree(fh);
if(atomic_dec_and_test(&dev->core->users))
- cx88_call_i2c_clients (dev->core, TUNER_SET_STANDBY, NULL);
+ call_all(dev->core, core, s_standby, 0);
return 0;
}
f->type = fh->radio ? V4L2_TUNER_RADIO : V4L2_TUNER_ANALOG_TV;
f->frequency = core->freq;
- cx88_call_i2c_clients(core,VIDIOC_G_FREQUENCY,f);
+ call_all(core, tuner, g_frequency, f);
return 0;
}
mutex_lock(&core->lock);
core->freq = f->frequency;
cx88_newstation(core);
- cx88_call_i2c_clients(core,VIDIOC_S_FREQUENCY,f);
+ call_all(core, tuner, s_frequency, f);
/* When changing channels it is required to reset TVAUDIO */
msleep (10);
strcpy(t->name, "Radio");
t->type = V4L2_TUNER_RADIO;
- cx88_call_i2c_clients(core,VIDIOC_G_TUNER,t);
+ call_all(core, tuner, g_tuner, t);
return 0;
}
if (0 != t->index)
return -EINVAL;
- cx88_call_i2c_clients(core,VIDIOC_S_TUNER,t);
+ call_all(core, tuner, s_tuner, t);
return 0;
}
/* load and configure helper modules */
if (core->board.audio_chip == V4L2_IDENT_WM8775)
- request_module("wm8775");
+ v4l2_i2c_new_subdev(&core->i2c_adap,
+ "wm8775", "wm8775", 0x36 >> 1);
+
+ if (core->board.audio_chip == V4L2_IDENT_TVAUDIO) {
+ /* This probes for a tda9874 as is used on some
+ Pixelview Ultra boards. */
+ static const unsigned short i2c_addr[] = {
+ 0xb0 >> 1, I2C_CLIENT_END
+ };
+
+ v4l2_i2c_new_probed_subdev(&core->i2c_adap,
+ "tvaudio", "tvaudio", i2c_addr);
+ }
switch (core->boardnr) {
case CX88_BOARD_DVICO_FUSIONHDTV_5_GOLD:
- case CX88_BOARD_DVICO_FUSIONHDTV_7_GOLD:
+ case CX88_BOARD_DVICO_FUSIONHDTV_7_GOLD: {
+ static struct i2c_board_info rtc_info = {
+ I2C_BOARD_INFO("isl1208", 0x6f)
+ };
+
request_module("rtc-isl1208");
+ core->i2c_rtc = i2c_new_device(&core->i2c_adap, &rtc_info);
+ }
/* break intentionally omitted */
case CX88_BOARD_DVICO_FUSIONHDTV_5_PCI_NANO:
request_module("ir-kbd-i2c");
/* config info -- analog */
struct v4l2_device v4l2_dev;
+ struct i2c_client *i2c_rtc;
unsigned int boardnr;
struct cx88_board board;
return container_of(v4l2_dev, struct cx88_core, v4l2_dev);
}
+#define call_all(core, o, f, args...) \
+ do { \
+ if (!core->i2c_rc) { \
+ if (core->gate_ctrl) \
+ core->gate_ctrl(core, 1); \
+ v4l2_device_call_all(&core->v4l2_dev, 0, o, f, ##args); \
+ if (core->gate_ctrl) \
+ core->gate_ctrl(core, 0); \
+ } \
+ } while (0)
+
struct cx8800_dev;
struct cx8802_dev;
/* cx88-i2c.c */
extern int cx88_i2c_init(struct cx88_core *core, struct pci_dev *pci);
-extern void cx88_call_i2c_clients(struct cx88_core *core,
- unsigned int cmd, void *arg);
/* ----------------------------------------------------------- */