[PATCH] dvb: budget-av: CI fixes
authorJohannes Stezenbach <js@linuxtv.org>
Tue, 17 May 2005 04:54:49 +0000 (21:54 -0700)
committerLinus Torvalds <torvalds@ppc970.osdl.org>
Tue, 17 May 2005 14:59:35 +0000 (07:59 -0700)
- remove enable_ci, ci interface is assumed to be present if the saa7113
  is not found.
- reduce the delay when checking for saa7113
- clean up the cam reset according to specifications
- turn off Vcc to the cam slot if cam is removed or fails reset
- remove cam reset in ciintf_init
- clean up printks (KERN_)
- move gpio setting into saa7113_init
- clean up unreadable frontend_init
(Kenneth Aafloy)

Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
drivers/media/dvb/ttpci/budget-av.c

index 7891f3f06f04724e41e27b703796dec933bfda37..6e0f5d307c52de21c56ce2fa499272a85a6ed801 100644 (file)
@@ -59,8 +59,12 @@ struct budget_av {
        struct dvb_ca_en50221 ca;
 };
 
-static int enable_ci = 0;
-
+/* GPIO CI Connections:
+ * 0 - Vcc/Reset (Reset is controlled by capacitor)
+ * 1 - Attribute Memory
+ * 2 - Card Enable (Active Low)
+ * 3 - Card Detect
+ */
 
 /****************************************************************************
  * INITIALIZATION
@@ -188,22 +192,35 @@ static int ciintf_slot_reset(struct dvb_ca_en50221 *ca, int slot)
 {
        struct budget_av *budget_av = (struct budget_av *) ca->data;
        struct saa7146_dev *saa = budget_av->budget.dev;
-       int max = 20;
+       int timeout = 50; // 5 seconds (4.4.6 Ready)
 
        if (slot != 0)
                return -EINVAL;
 
        dprintk(1, "ciintf_slot_reset\n");
 
-       /* reset the card */
-       saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTHI);
-       msleep(100);
-       saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTLO);
+       saa7146_setgpio(saa, 2, SAA7146_GPIO_OUTHI); /* disable card */
 
-       while (--max > 0 && ciintf_read_attribute_mem(ca, slot, 0) != 0x1d)
+       saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTHI); /* Vcc off */
+       msleep(2);
+       saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTLO); /* Vcc on */
+       msleep(20); /* 20 ms Vcc settling time */
+
+       saa7146_setgpio(saa, 2, SAA7146_GPIO_OUTLO); /* enable card */
+
+       /* This should have been based on pin 16 READY of the pcmcia port,
+        * but AFAICS it is not routed to the saa7146 */
+       while (--timeout > 0 && ciintf_read_attribute_mem(ca, slot, 0) != 0x1d)
                msleep(100);
 
-       ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTB);
+       if (timeout <= 0)
+       {
+               printk(KERN_ERR "budget-av: cam reset failed (timeout).\n");
+               saa7146_setgpio(saa, 2, SAA7146_GPIO_OUTHI); /* disable card */
+               saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTHI); /* Vcc off */
+               return -ETIMEDOUT;
+       }
+
        return 0;
 }
 
@@ -240,7 +257,6 @@ static int ciintf_poll_slot_status(struct dvb_ca_en50221 *ca, int slot, int open
 {
        struct budget_av *budget_av = (struct budget_av *) ca->data;
        struct saa7146_dev *saa = budget_av->budget.dev;
-       int cam = 0;
 
        if (slot != 0)
                return -EINVAL;
@@ -248,15 +264,21 @@ static int ciintf_poll_slot_status(struct dvb_ca_en50221 *ca, int slot, int open
        if (!budget_av->slot_status) {
                saa7146_setgpio(saa, 3, SAA7146_GPIO_INPUT);
                udelay(1);
-               cam = saa7146_read(saa, PSR) & MASK_06;
-               saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTLO);
-
-               if (cam)
+               if (saa7146_read(saa, PSR) & MASK_06)
+               {
+                       printk(KERN_INFO "budget-av: cam inserted\n");
                        budget_av->slot_status = 1;
+               }
+               saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTLO);
        } else if (!open) {
                saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTLO);
                if (ttpci_budget_debiread(&budget_av->budget, DEBICICAM, 0, 1, 0, 1) == -ETIMEDOUT)
+               {
+                       printk(KERN_INFO "budget-av: cam ejected\n");
+                       saa7146_setgpio(saa, 2, SAA7146_GPIO_OUTHI); /* disable card */
+                       saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTHI); /* Vcc off */
                        budget_av->slot_status = 0;
+               }
        }
 
        if (budget_av->slot_status == 1)
@@ -272,17 +294,11 @@ static int ciintf_init(struct budget_av *budget_av)
 
        memset(&budget_av->ca, 0, sizeof(struct dvb_ca_en50221));
 
-       /* setup GPIOs */
-       saa7146_setgpio(saa, 1, SAA7146_GPIO_OUTHI);
+       saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTLO);
+       saa7146_setgpio(saa, 1, SAA7146_GPIO_OUTLO);
        saa7146_setgpio(saa, 2, SAA7146_GPIO_OUTLO);
        saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTLO);
 
-       /* Reset the card */
-       saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTHI);
-       msleep(50);
-       saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTLO);
-       msleep(100);
-
        /* Enable DEBI pins */
        saa7146_write(saa, MC1, saa7146_read(saa, MC1) | (0x800 << 16) | 0x800);
 
@@ -297,13 +313,14 @@ static int ciintf_init(struct budget_av *budget_av)
        budget_av->ca.slot_ts_enable = ciintf_slot_ts_enable;
        budget_av->ca.poll_slot_status = ciintf_poll_slot_status;
        budget_av->ca.data = budget_av;
+
        if ((result = dvb_ca_en50221_init(&budget_av->budget.dvb_adapter,
                                          &budget_av->ca, 0, 1)) != 0) {
-               printk("budget_av: CI interface detected, but initialisation failed.\n");
+               printk(KERN_ERR "budget-av: ci initialisation failed.\n");
                goto error;
        }
-       // success!
-       printk("ciintf_init: CI interface initialised\n");
+
+       printk(KERN_INFO "budget-av: ci interface initialised.\n");
        budget_av->budget.ci_present = 1;
        return 0;
 
@@ -361,8 +378,12 @@ static const u8 saa7113_tab[] = {
 static int saa7113_init(struct budget_av *budget_av)
 {
        struct budget *budget = &budget_av->budget;
+       struct saa7146_dev *saa = budget->dev;
        const u8 *data = saa7113_tab;
 
+       saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTHI);
+       msleep(200);
+
        if (i2c_writereg(&budget->i2c_adap, 0x4a, 0x01, 0x08) != 1) {
                dprintk(1, "saa7113 not found on KNC card\n");
                return -ENODEV;
@@ -697,82 +718,90 @@ static u8 read_pwm(struct budget_av *budget_av)
        return pwm;
 }
 
+#define SUBID_DVBS_KNC1                0x0010
+#define SUBID_DVBS_KNC1_PLUS   0x0011
+#define SUBID_DVBS_TYPHOON     0x4f56
+#define SUBID_DVBS_CINERGY1200 0x1154
+
+#define SUBID_DVBC_KNC1                0x0020
+#define SUBID_DVBC_KNC1_PLUS   0x0021
+#define SUBID_DVBC_CINERGY1200 0x1156
+
+#define SUBID_DVBT_KNC1_PLUS   0x0031
+#define SUBID_DVBT_KNC1                0x0030
+#define SUBID_DVBT_CINERGY1200 0x1157
 
 static void frontend_init(struct budget_av *budget_av)
 {
-       switch (budget_av->budget.dev->pci->subsystem_device) {
-       case 0x0011:            // KNC1 DVB-S Plus budget with AV IN (stv0299/Philips SU1278(tsa5059))
-               saa7146_write(budget_av->budget.dev, GPIO_CTRL, 0x50000000); // Enable / PowerON Frontend
-       case 0x4f56:            // Typhoon/KNC1 DVB-S budget (stv0299/Philips SU1278(tsa5059))
-       case 0x0010:            // KNC1 DVB-S budget (stv0299/Philips SU1278(tsa5059))
-               budget_av->budget.dvb_frontend =
-                       stv0299_attach(&typhoon_config, &budget_av->budget.i2c_adap);
-               if (budget_av->budget.dvb_frontend != NULL) {
+       struct saa7146_dev * saa = budget_av->budget.dev;
+       struct dvb_frontend * fe = NULL;
+
+       switch (saa->pci->subsystem_device) {
+               case SUBID_DVBS_KNC1_PLUS:
+               case SUBID_DVBC_KNC1_PLUS:
+               case SUBID_DVBT_KNC1_PLUS:
+                       // Enable / PowerON Frontend
+                       saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTHI);
                        break;
-               }
+       }
+
+       switch (saa->pci->subsystem_device) {
+
+       case SUBID_DVBS_KNC1:
+       case SUBID_DVBS_KNC1_PLUS:
+       case SUBID_DVBS_TYPHOON:
+               fe = stv0299_attach(&typhoon_config,
+                                   &budget_av->budget.i2c_adap);
                break;
 
-       case 0x0021:            // KNC1 DVB-C Plus budget with AV IN (tda10021/Philips CU1216(tua6034))
-               saa7146_write(budget_av->budget.dev, GPIO_CTRL, 0x50000000); // Enable / PowerON Frontend
-       case 0x0020:            // KNC1 DVB-C budget (tda10021/Philips CU1216(tua6034))
-               budget_av->budget.dvb_frontend =
-                       tda10021_attach(&philips_cu1216_config,
-                                       &budget_av->budget.i2c_adap, read_pwm(budget_av));
-               if (budget_av->budget.dvb_frontend != NULL) {
-                       break;
-               }
+       case SUBID_DVBS_CINERGY1200:
+               fe = stv0299_attach(&cinergy_1200s_config,
+                                   &budget_av->budget.i2c_adap);
                break;
 
-       case 0x0031:            // KNC1 DVB-T Plus budget with AV IN (tda10046/Philips TU1216(tda6651tt))
-               saa7146_write(budget_av->budget.dev, GPIO_CTRL, 0x50000000); // Enable / PowerON Frontend
-       case 0x0030:            // KNC1 DVB-T budget (tda10046/Philips TU1216(tda6651tt))
-               budget_av->budget.dvb_frontend =
-                       tda10046_attach(&philips_tu1216_config, &budget_av->budget.i2c_adap);
-               if (budget_av->budget.dvb_frontend != NULL) {
-                       break;
-               }
+       case SUBID_DVBC_KNC1:
+       case SUBID_DVBC_KNC1_PLUS:
+               fe = tda10021_attach(&philips_cu1216_config,
+                                    &budget_av->budget.i2c_adap,
+                                    read_pwm(budget_av));
                break;
 
-       case 0x1154:            // TerraTec Cinergy 1200 DVB-S (stv0299/Philips SU1278(tsa5059))
-               budget_av->budget.dvb_frontend =
-                       stv0299_attach(&cinergy_1200s_config, &budget_av->budget.i2c_adap);
-               if (budget_av->budget.dvb_frontend != NULL) {
-                       break;
-               }
+       case SUBID_DVBT_KNC1:
+       case SUBID_DVBT_KNC1_PLUS:
+               fe = tda10046_attach(&philips_tu1216_config,
+                                    &budget_av->budget.i2c_adap);
                break;
 
-       case 0x1156:            // Terratec Cinergy 1200 DVB-C (tda10021/Philips CU1216(tua6034))
-               budget_av->budget.dvb_frontend =
-                       tda10021_attach(&philips_cu1216_config,
-                                       &budget_av->budget.i2c_adap, read_pwm(budget_av));
-               if (budget_av->budget.dvb_frontend) {
-                       break;
-               }
+       case SUBID_DVBC_CINERGY1200:
+               fe = tda10021_attach(&philips_cu1216_config,
+                                    &budget_av->budget.i2c_adap,
+                                    read_pwm(budget_av));
                break;
 
-       case 0x1157:            // Terratec Cinergy 1200 DVB-T (tda10046/Philips TU1216(tda6651tt))
-               budget_av->budget.dvb_frontend =
-                       tda10046_attach(&philips_tu1216_config, &budget_av->budget.i2c_adap);
-               if (budget_av->budget.dvb_frontend) {
-                       break;
-               }
+       case SUBID_DVBT_CINERGY1200:
+               fe = tda10046_attach(&philips_tu1216_config,
+                                    &budget_av->budget.i2c_adap);
                break;
        }
 
-       if (budget_av->budget.dvb_frontend == NULL) {
-               printk("budget_av: A frontend driver was not found for device %04x/%04x subsystem %04x/%04x\n",
-                      budget_av->budget.dev->pci->vendor,
-                      budget_av->budget.dev->pci->device,
-                      budget_av->budget.dev->pci->subsystem_vendor,
-                      budget_av->budget.dev->pci->subsystem_device);
-       } else {
-               if (dvb_register_frontend
-                   (&budget_av->budget.dvb_adapter, budget_av->budget.dvb_frontend)) {
-                       printk("budget-av: Frontend registration failed!\n");
-                       if (budget_av->budget.dvb_frontend->ops->release)
-                               budget_av->budget.dvb_frontend->ops->release(budget_av->budget.dvb_frontend);
-                       budget_av->budget.dvb_frontend = NULL;
-               }
+       if (fe == NULL) {
+               printk(KERN_ERR "budget-av: A frontend driver was not found "
+                               "for device %04x/%04x subsystem %04x/%04x\n",
+                      saa->pci->vendor,
+                      saa->pci->device,
+                      saa->pci->subsystem_vendor,
+                      saa->pci->subsystem_device);
+               return;
+       }
+
+       budget_av->budget.dvb_frontend = fe;
+
+       if (dvb_register_frontend(&budget_av->budget.dvb_adapter,
+                                 budget_av->budget.dvb_frontend)) {
+               printk(KERN_ERR "budget-av: Frontend registration failed!\n");
+               if (budget_av->budget.dvb_frontend->ops->release)
+                       budget_av->budget.dvb_frontend->ops->release(budget_av->budget.dvb_frontend);
+               budget_av->budget.dvb_frontend = NULL;
        }
 }
 
@@ -829,6 +858,7 @@ static int budget_av_attach(struct saa7146_dev *dev, struct saa7146_pci_extensio
 
        memset(budget_av, 0, sizeof(struct budget_av));
 
+       budget_av->has_saa7113 = 0;
        budget_av->budget.ci_present = 0;
 
        dev->ext_priv = budget_av;
@@ -843,10 +873,7 @@ static int budget_av_attach(struct saa7146_dev *dev, struct saa7146_pci_extensio
        saa7146_write(dev, DD1_INIT, 0x07000600);
        saa7146_write(dev, MC2, MASK_09 | MASK_25 | MASK_10 | MASK_26);
 
-       saa7146_setgpio(dev, 0, SAA7146_GPIO_OUTHI);
-       msleep(500);
-
-       if (0 == saa7113_init(budget_av)) {
+       if (saa7113_init(budget_av) == 0) {
                budget_av->has_saa7113 = 1;
 
                if (0 != saa7146_vv_init(dev, &vv_data)) {
@@ -867,9 +894,7 @@ static int budget_av_attach(struct saa7146_dev *dev, struct saa7146_pci_extensio
 
                saa7113_setinput(budget_av, 0);
        } else {
-               budget_av->has_saa7113 = 0;
-
-               saa7146_setgpio(dev, 0, SAA7146_GPIO_OUTLO);
+               ciintf_init(budget_av);
        }
 
        /* fixme: find some sane values here... */
@@ -877,11 +902,11 @@ static int budget_av_attach(struct saa7146_dev *dev, struct saa7146_pci_extensio
 
        mac = budget_av->budget.dvb_adapter.proposed_mac;
        if (i2c_readregs(&budget_av->budget.i2c_adap, 0xa0, 0x30, mac, 6)) {
-               printk("KNC1-%d: Could not read MAC from KNC1 card\n",
+               printk(KERN_ERR "KNC1-%d: Could not read MAC from KNC1 card\n",
                       budget_av->budget.dvb_adapter.num);
                memset(mac, 0, 6);
        } else {
-               printk("KNC1-%d: MAC addr = %.2x:%.2x:%.2x:%.2x:%.2x:%.2x\n",
+               printk(KERN_INFO "KNC1-%d: MAC addr = %.2x:%.2x:%.2x:%.2x:%.2x:%.2x\n",
                       budget_av->budget.dvb_adapter.num,
                       mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
        }
@@ -889,9 +914,6 @@ static int budget_av_attach(struct saa7146_dev *dev, struct saa7146_pci_extensio
        budget_av->budget.dvb_adapter.priv = budget_av;
        frontend_init(budget_av);
 
-       if (enable_ci)
-               ciintf_init(budget_av);
-
        return 0;
 }
 
@@ -1024,5 +1046,3 @@ MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Ralph Metzler, Marcus Metzler, Michael Hunold, others");
 MODULE_DESCRIPTION("driver for the SAA7146 based so-called "
                   "budget PCI DVB w/ analog input and CI-module (e.g. the KNC cards)");
-module_param_named(enable_ci, enable_ci, int, 0644);
-MODULE_PARM_DESC(enable_ci, "Turn on/off CI module (default:off).");