+++ /dev/null
-2001-10-11 Tim Waugh <twaugh@redhat.com>
- * parport_pc.c, parport_serial.c: Support for NetMos cards.
- + Patch originally from Michael Reinelt <reinelt@eunet.at>.
-
-2002-04-25 Tim Waugh <twaugh@redhat.com>
-
- * parport_serial.c, parport_pc.c: Move some SIIG cards around.
- Patch from Andrey Panin.
-
-2002-01-20 Tim Waugh <twaugh@redhat.com>
-
- * parport_pc.c (parport_pc_compat_write_block_pio,
- parport_pc_ecp_write_block_pio, parport_pc_ecp_read_block_pio):
- Use the default implementations if the caller wants to use
- O_NONBLOCK.
-
-2002-02-25 Tim Waugh <twaugh@redhat.com>
-
- * parport_pc.c: Make sure that priv->ctr_writable includes IntEn
- even if IRQ is given as a parameter.
-
-2002-01-21 Tim Waugh <twaugh@redhat.com>
-
- * daisy.c: Apply patch from Max Vorobiev to make parport_daisy_select
- work for ECP/EPP modes.
-
-2002-01-13 Niels Kristian Bech Jensen <nkbj@image.dk>
-
- * parport_pc.c: Change some occurrences of frob_set_mode to
- ECR_WRITE. This fixes PLIP.
-
-2002-01-04 Tim Waugh <twaugh@redhat.com>
-
- * share.c (parport_claim_or_block): Sleep interruptibly to prevent
- a possible deadlock.
-
-2001-12-07 Damian Gruszka <damian.gruszka@VisionSystems.de>
-
- * parport_pc.c (ECR_WRITE): Define. If there are forbidden bits
- in the ECR register for some chips, this will be a useful place to
- put that knowledge.
- (change_mode): Use ECR_WRITE.
- (parport_pc_restore_state): Likewise.
- (parport_ECPPS2_supported): Likewise.
- (parport_ECPEPP_supported): Likewise.
- (irq_probe_EPP): Likewise.
- (programmable_irq_support): Likewise.
- (programmable_dma_support): Likewise.
- (parport_pc_probe_port): Likewise.
-
- (frob_set_mode): New function. Set the mode bits of the ECR.
- (get_fifo_residue): Use frob_set_mode.
- (parport_pc_ecpepp_read_data): Likewise.
- (parport_pc_ecpepp_write_data): Likewise.
- (parport_pc_ecpepp_read_addr): Likewise.
- (parport_pc_ecpepp_write_addr): Likewise.
- (parport_pc_compat_write_block_pio): Likewise.
- (parport_pc_ecp_write_block_pio): Likewise.
- (parport_ECR_present): Likewise.
- (parport_ECP_supported): Likewise.
- (parport_EPP_supported): Likewise.
- (parport_ECPEPP_supported): Likewise.
- (programmable_irq_support): Likewise.
- (irq_probe_ECP): Likewise.
- (programmable_dma_support): Likewise.
-
- (parport_pc_enable_irq): Only enable interrupts if we know which
- IRQ line they will come from.
- (parport_pc_init_state): Set nErrIntrEn at initialisation.
- (parport_pc_restore_state): Only write writable bits of CTR.
- (parport_irq_probe): If no IRQ is found, take ackIntEn out of the
- writable bit set.
-
-2001-12-07 Tim Waugh <twaugh@redhat.com>
-
- * parport_pc.c (parport_pc_fifo_write_block_pio): Correct typo.
- (parport_pc_init_state): Only set ackIntEn if we know which IRQ
- line the interrupts will come from.
-
-2001-12-07 Tim Waugh <twaugh@redhat.com>
-
- * ieee1284_ops.c (parport_ieee1284_epp_write_addr,
- parport_ieee1284_epp_read_addr): Actually do something useful.
-
-2001-12-07 Tim Waugh <twaugh@redhat.com>
-
- * parport_pc.c (dmaval): Don't use DMA by default. It seems to be
- too buggy at the moment. Use 'dma=auto' to restore the previous
- behaviour.
-
-2001-12-07 Tim Waugh <twaugh@redhat.com>
-
- * daisy.c (DEBUG): Undefine.
-
-2001-12-06 Tim Waugh <twaugh@redhat.com>
-
- * ieee1284_ops.c (parport_ieee1284_ecp_read_data): Mask off
- PARPORT_CONTROL_AUTOFD as well. Bug spotted by Joe
- <joeja@mindspring.com>.
-
-2001-12-03 Rich Liu <Rich.Liu@ite.com.tw>
-
- * parport_pc.c (sio_ite_8872_probe): ITE8873 is a single-port
- serial board, not a serial+parallel.
-
-2001-11-30 Niels Kristian Bech Jensen <nkbj@image.dk>
-
- * parport_pc.c: Fix compiler warning.
-
-2001-11-14 Tim Waugh <twaugh@redhat.com>
-
- * parport_pc.c (parport_pc_pci_probe): Hooks for PCI cards before
- and after probing for ports.
- * parport_serial.c (parport_register): Likewise.
-
-2001-11-12 Tim Waugh <twaugh@redhat.com>
-
- * parport_pc.c (init_module): Warn when parameters are ignored.
-
-2001-11-01 Damian Gruszka <damian.gruszka@VisionSystems.de>
-
- * parport_serial.c (serial_register): Set base_baud before
- calling register_serial.
-
-2001-10-26 Tim Waugh <twaugh@redhat.com>
-
- * parport_pc.c (parport_irq_probe): When ECR programmable IRQ
- support fails, generate interrupts using the FIFO even if we don't
- want to use the FIFO for real data transfers.
- (parport_pc_probe_port): Display the ECR address if we have an
- ECR, not just if we will use the FIFO.
-
-2001-10-24 Dave Strauss <D.Strauss@motorola.com>
-
- * parport_pc.c (parport_pc_compat_write_block_pio,
- parport_pc_ecp_write_block_pio): Allow a few seconds for an ECP
- transfer to finish up.
-
-2001-10-11 Tim Waugh <twaugh@redhat.com>
-
- * parport_pc (sio_ite_8872_probe): New function, submitted by Rich
- Liu from ITE. Cleaned up, removed bogus phys_to_virt calls.
-
-2001-10-24 Tim Waugh <twaugh@redhat.com>
-
- * parport_pc.c: Support for AKS AladdinCARD. Patch from
- Aladdin Knowledge Systems (Christian Groessler).
-
-2001-10-24 Tim Waugh <twaugh@redhat.com>
-
- * ieee1284_ops.c (parport_ieee1284_ecp_read_data): Try to minimise
- turnaround time.
-
- * ieee1284.c (parport_poll_peripheral): Try a couple of times
- first without delaying.
-
-2001-10-10 Tim Waugh <twaugh@redhat.com>
-
- * parport_pc.c: Support for OX16PCI954 PCI card.
-
-2001-10-10 Tim Waugh <twaugh@redhat.com>
-
- * parport_pc.c: Support for OX12PCI840 PCI card (reported by
- mk@daveg.com). Lock-ups diagnosed by Ronnie Arosa (and now we
- just don't trust its ECR).
-
-2001-10-10 Gunther Mayer <gunther.mayer@braunschweig.okersurf.de>
-
- * parport_pc.c: Support for AVLAB cards.
-
-2001-10-10 Tim Waugh <twaugh@redhat.com>
-
- * ieee1284_ops.c (ecp_forward_to_reverse, ecp_reverse_to_forward):
- Remember to retry direction switch if it fails. Patch from David
- Lambert.
-
-2001-10-08 David C. Hansen <haveblue@us.ibm.com>
-
- * share.c: Make driverlist_lock and parportlist_lock static.
-
-2001-10-08 Philip Blundell <philb@gnu.org>
-
- * parport_pc.c: New modular parameter verbose_logging.
- Make port->modes indicate the modes that we are prepared to use,
- rather than the modes that are available.
-
-2001-10-07 Tim Waugh <twaugh@redhat.com>
-
- * parport_pc.c (parport_pc_probe_port): Fix memory leak spotted by
- Kipp Cannon.
-
-2001-10-07 Tim Waugh <twaugh@redhat.com>
-
- * parport_serial.c: Remove NetMos support, since it causes problems
- for some people.
-
-2001-08-30 Tim Waugh <twaugh@redhat.com>
-
- * parport_serial.c (parport_serial_pci_probe): Clean-up on partial
- registration failure.
-
-2001-08-14 Tim Waugh <twaugh@redhat.com>
-
- * parport_pc.c (parport_pc_init_superio): Allow for more than one
- SuperIO device. Patch from Rich Lio (ITE).
-
-2001-08-11 Tim Waugh <twaugh@redhat.com>
-
- * parport_pc.c: Support for Titan Electronics cards.
-
-2001-08-08 Tim Waugh <twaugh@redhat.com>
-
- * share.c (parport_unregister_device): Remove device from wait list
- too.
-
-2001-06-20 Tim Waugh <twaugh@redhat.com>
-
- * parport_pc.c: Make 'io_hi=0' work.
-
-2001-05-31 Tim Waugh <twaugh@redhat.com>
-
- * parport_serial.c: New file.
-
-2001-06-05 Tim Waugh <twaugh@redhat.com>
-
- * parport_pc.c (parport_pc_unregister_port): New exported function.
- Do the opposite of parport_pc_probe_port.
- (cleanup_module): Use it.
-
-2001-05-22 Juan Quintela <quintela@mandrakesoft.com>
-
- * parport_amiga.c: Set printk levels.
- * parport_gsc.c: Likewise.
- * parport_mfc3.c: Likewise.
- * parport_pc.c: Likewise.
- * parport_sunbpp.c: Likewise.
- * probe.c: Likewise.
- * share.c: Likewise.
-
-2001-05-10 Fred Barnes <frmb2@ukc.ac.uk>
-
- * parport_pc.c (parport_pc_epp_read_data): added support for
- reading from a w91284pic peripheral, flag is PARPORT_W91284PIC.
-
-2001-05-07 Fred Barnes <frmb2@ukc.ac.uk>
-
- * parport_pc.c (parport_pc_epp_read_data,
- parport_pc_epp_write_data, parport_pc_epp_read_addr,
- parport_pc_epp_write_addr): support for fast reads/writes using
- the PARPORT_EPP_FAST flag.
-
- * ieee1284.c (parport_read, parport_write): added code to handle
- software EPP mode (IEEE1284_MODE_EPPSWE). Added code to allow
- BYTE mode reverse transfers (previously always went for NIBBLE
- mode).
-
- * ieee1284_ops.c (parport_ieee1284_epp_read_data,
- parport_ieee1284_epp_write_data): fixed various polarity problems.
- Also (theoretically) fixed address versions (.._addr), but no
- hardware to test this on.
-
- * parport_pc.h: added parport_dump_state() function for debugging.
- Needs to have DEBUG_PARPORT to be defined for it to be included.
-
-2001-05-03 Tim Waugh <twaugh@redhat.com>
-
- * parport_pc.c: Fix the compile problem I introduce from the last
- change.
-
-2001-04-20 Paul Gortmaker <p_gortmaker@yahoo.com>
-
- * parport_pc.c: Cut down the size quite a bit (more than 4k off
- the object, about 1k off the zImage) for the older non-PCI
- machines which are typically resource starved anyway...
-
-2001-03-26 R Horn <rjh@world.std.com>
-
- * parport_pc.c: Some commentary changes.
-
-2001-04-19 Tim Waugh <twaugh@redhat.com>
-
- * parport_pc.c (parport_pc_probe_port): Remove __devinit
- attribute. Export unconditionally.
-
-2001-04-14 Jeff Garzik <jgarzik@pobox.com>
-
- Merged: 2001-03-30 Tim Waugh <twaugh@redhat.com>
-
- * drivers/parport/parport_pc.c: Make Via SuperIO chipsets behave
- like everything else with respect to irq= and dma= parameters.
-
-2001-04-08 Tim Waugh <twaugh@redhat.com>
-
- * parport_pc.c (parport_pc_save_state): Read from the soft copy of
- the control port.
- (parport_pc_restore_state): Update the soft copy of the control
- port.
-
-2001-03-26 Tim Waugh <twaugh@redhat.com>
-
- * share.c (parport_find_number, parport_find_base): Trigger
- a lowlevel driver load if there are no ports yet.
-
-2001-03-26 Tim Waugh <twaugh@redhat.com>
-
- * parport_pc.c (parport_ECP_supported): Remove the IRQ conflict
- check since it seems totally unreliable.
-
-2001-03-02 Tim Waugh <twaugh@redhat.com>
-
- * ieee1284_ops.c (parport_ieee1284_read_nibble): Reset nAutoFd
- on timeout. Matches 2.2.x behaviour.
-
-2001-03-02 Andrew Morton
-
- * parport_pc.c (registered_parport): New static variable.
- (parport_pc_find_ports): Set it when we register PCI driver.
- (init_module): Unregister PCI driver if necessary when we
- fail.
-
-2001-03-02 Tim Waugh <twaugh@redhat.com>
-
- * ieee1284_ops.c (parport_ieee1284_write_compat): Don't use
- down_trylock to reset the IRQ count. Don't even use sema_init,
- because it's not even necessary to reset the count. I can't
- remember why we ever did.
-
-2001-01-04 Peter Osterlund <peter.osterlund@mailbox.swipnet.se>
-
- * ieee1284.c (parport_negotiate): Fix missing printk argument.
-
-2001-01-03 Paul Schleger <Paul.Schleger@t-online.de>
-
- * probe.c (parse_data): Get rid of trailing blanks in values.
- Needed for XEROX XJ8C printer.
-
-2001-01-03 Tim Waugh <twaugh@redhat.com>
-
- * parport_pc.c (parport_pc_probe_port): Say something when probes
- are omitted.
-
-2001-01-03 Tim Waugh <twaugh@redhat.com>
-
- * parport_pc.c (sio_via_686a_probe): Correct dma=255 fix.
-
-2000-11-21 Tim Waugh <twaugh@redhat.com>
-
- * parport_pc.c (parport_pc_ecp_write_block_pio): Fix
- reverse-to-forward logic. Spotted by Roland Kuck
- <rci@cityweb.de>.
-
-2000-09-16 Cesar Eduardo Barros <cesarb@nitnet.com.br>
-
- * parport_pc.c (sio_via_686a_probe): Handle case
- where hardware returns 255 for IRQ or DMA.
-
-2000-07-20 Eddie C. Dost <ecd@skynet.be>
-
- * share.c (attach_driver_chain): attach[i](port) needs to be
- replaced by attach[count](port).
-
-2000-07-20 Eddie C. Dost <ecd@skynet.be>
-
- * daisy.c (add_dev): kmalloc args are in wrong order.
-
-2000-07-12 Tim Waugh <twaugh@redhat.com>
-
- * share.c: Documentation for parport_{get,port}_port,
- parport_find_{number,base}.
-
-2000-07-12 Tim Waugh <twaugh@redhat.com>
-
- * share.c (parport_unregister_device): Remove unneeded locking
- (test cad==dev).
- (parport_claim): Likewise.
- (parport_find_number): New function.
-
-2000-07-12 Tim Waugh <twaugh@redhat.com>
-
- * share.c (parport_register_port): Hold the parportlist_lock while
- looking for a free parport number.
- (parport_register_driver): Make sure that attach can block.
- (attach_driver_chain): Likewise.
-
-2000-07-12 Tim Waugh <twaugh@redhat.com>
-
- * share.c (call_driver_chain): Do reference counting things.
- (parport_get_port): New function.
- (parport_put_port): New function.
- (parport_register_port): Initialise reference count to zero.
- (parport_unregister_port): Check reference count rather than
- driver list to see if we can free the port.
-
-2000-07-12 Tim Waugh <twaugh@redhat.com>
-
- * share.c: Clarifications in doc comments.
-
-2000-07-12 Tim Waugh <twaugh@redhat.com>
-
- * share.c (parport_unregister_port): Fix typo in comment.
-
-2000-07-11 Gunther Mayer <gunther.mayer@braunschweig.okersurf.de>
-
- * parport_pc.c: Support for the full range of Timedia cards.
-
-2000-07-08 Tim Waugh <twaugh@redhat.com>
-
- * daisy.c: License block comments as part of parportbook.
- * ieee1284.c: Likewise.
- * share.c: Likewise.
-
-2000-06-30 Petr Vandrovec <vandrove@vc.cvut.cz>
-
- * procfs.c (do_hardware_modes): Generated string can be up to 34
- chars long.
-
-2000-06-20 Gunther Mayer <gunther.mayer@braunschweig.okersurf.de>
-
- * parport_pc.c (parport_pc_compat_write_block_pio): Warn about
- change_mode failures.
- (parport_pc_ecp_write_block_pio): Likewise.
- (parport_pc_ecp_read_block_pio): Likewise.
-
-2000-06-20 Gunther Mayer <gunther.mayer@braunschweig.okersurf.de>
-
- * parport_pc.c (parport_SPP_supported): Warn more about possibly
- incorrect parameters.
-
-2000-06-15 Tim Waugh <twaugh@redhat.com>
-
- * parport_pc.c (parport_ECP_supported): Set PARPORT_MODE_COMPAT
- for ECP ports, since they can all do hardware accelerated
- compatibility mode (I assume).
-
-2000-06-13 Tim Waugh <twaugh@redhat.com>
-
- * parport_pc.c (cleanup_module): Remark about possible bugs.
-
-2000-06-13 Tim Waugh <twaugh@redhat.com>
-
- * procfs.c: Break 'hardware' out into separate files.
-
-2000-05-28 Gunther Mayer <gunther.mayer@braunschweig.okersurf.de>
-
- * Fix PCI ID printk for non-superio PCI cards.
-
-2000-05-28 Tim Waugh <twaugh@redhat.com>
-
- * share.c (call_driver_chain): Get the driverlist_lock.
- (parport_register_device): Make sure that port->devices always
- looks consistent.
- (parport_register_driver): Ensure that parport drivers are given
- parameters that are valid for the duration of the callback by
- locking the portlist against changes.
- (parport_unregister_driver): Likewise.
- (parport_claim): Don't overwrite flags.
-
-2000-05-28 Tim Waugh <twaugh@redhat.com>
-
- * daisy.c (assign_addrs): Avoid double-probing daisy-chain devices
- if the first probe succeeds.
-
-2000-05-16 Tim Waugh <twaugh@redhat.com>
-
- * share.c (parport_claim): Fix SMP race.
-
-2000-05-15 Gunther Mayer <gunther.mayer@braunschweig.okersurf.de>
-
- * parport_pc.c (parport_pc_compat_write_block_pio): Check for
- timeouts.
- (parport_pc_ecp_write_block_pio): Likewise.
- (parport_pc_ecp_read_block_pio): Likewise.
-
-2000-05-02 Gunther Mayer <gunther.mayer@braunschweig.okersurf.de>
-
- * parport_pc.c: PCI SYBA patch and verbose PCI detection.
-
-2000-05-02 Gunther Mayer <gunther.mayer@braunschweig.okersurf.de>
-
- * parport_pc.c (decode_smsc): Fix SMSC 665/666 identification.
-
-2000-04-28 Tim Waugh <twaugh@redhat.com>
-
- * ieee1284.c: Short function descriptions can't be multiline.
-
- * daisy.c: Short function descriptions can't be multiline.
-
-2000-04-19 Tim Waugh <twaugh@redhat.com>
-
- * parport_pc.c (parport_pc_fifo_write_block_dma): Make maxlen
- calculation a bit clearer.
-
- * ieee1284.c (parport_negotiate): Turn on data line drivers.
-
- * ieee1284_ops.c (parport_ieee1284_read_byte): Turn off data line
- drivers.
- (parport_ieee1284_write_compat): Turn on data line drivers.
-
- * daisy.c (assign_addrs): Turn on data line drivers.
- (cpp_mux): Likewise.
- (cpp_daisy): Likewise.
-
-2000-04-04 Tim Waugh <twaugh@redhat.com>
-
- * parport_pc.c: Add support for another PCI card.
-
-2000-04-04 Tim Waugh <twaugh@redhat.com>
-
- * daisy.c: Documentation in kernel-doc format.
-
- * ieee1284.c: Likewise.
-
- * share.c: Likewise.
-
-2000-04-01 Tim Waugh <twaugh@redhat.com>
-
- * share.c (parport_register_device): Need to hold the module
- reference counts before sleeping.
-
-2000-03-27 Tim Waugh <twaugh@redhat.com>
-
- * parport_pc.c (parport_pc_ecp_read_block_pio): Correct operation
- when peripheral is trying to send data when we stop listening.
-
-2000-03-22 Tim Waugh <twaugh@redhat.com>
-
- * init.c (parport_setup): Fix return value.
-
-2000-03-21 Tim Waugh <twaugh@redhat.com>
-
- * parport_pc.c (parport_pc_pci_probe): Fix return value; call
- pci_enable_device.
-
-2000-03-16 Tim Waugh <twaugh@redhat.com>
-
- * parport_pc.c (parport_ECP_supported): This seems to trigger on
- machines that don't have an IRQ conflict; toned down the warning
- message accordingly.
-
-2000-03-16 Gunther Mayer <gunther.mayer@braunschweig.netsurf.de>
-
- * parport_pc.c (show_parconfig_smsc37c669): Fix typo.
- (decode_winbond): More IDs.
- (winbond_check): Protect against false positives.
- (winbond_check2): Likewise.
- (smsc_check): Likewise.
-
-2000-03-15 Tim Waugh <twaugh@redhat.com>
-
- * parport_pc.c (cleanup_module): Don't call pci_unregister_driver
- if we didn't call pci_register_driver first.
-
-2000-03-13 Tim Waugh <twaugh@redhat.com>
-
- * parport_pc.c (parport_pc_init): Moved from asm/parport.h.
-
- * Config.in: CONFIG_PARPORT_PC_SUPERIO: new option.
-
- * parport_pc.c (show_parconfig_smsc37c669): Make __devinit.
- (show_parconfig_winbond): Likewise.
- (decode_winbond): Likewise.
- (decode_smsc): Likewise.
- (winbond_check): Likewise.
- (winbond_check2): Likewise.
- (smsc_check): Likewise.
- (detect_and_report_winbond): Likewise.
- (detect_and_report_smsc): Likewise.
- (get_superio_dma): Likewise.
- (get_superio_irq): Likewise.
- (parport_pc_find_isa_ports): New function.
- (parport_pc_find_ports): New function.
- (init_module): Make superio a config option, not a parameter.
-
-2000-03-10 Tim Waugh <twaugh@redhat.com>
-
- * parport_pc.c (decode_winbond): Use correct 83877ATF chip ID.
- (decode_winbond): Fix typo.
-
-2000-03-09 Tim Waugh <twaugh@redhat.com>
-
- * parport_pc.c: Integrate SuperIO PCI probe with normal PCI card
- probe, so that the MODULE_DEVICE_TABLE is complete.
-
projects / GitHub / moto-9609 / android_kernel_motorola_exynos9610.git / commitdiff