sound: remove OSS Ensoniq SoundScape driver
authorKrzysztof Helt <krzysztof.h1@wp.pl>
Sat, 24 Oct 2009 15:47:33 +0000 (17:47 +0200)
committerTakashi Iwai <tiwai@suse.de>
Fri, 30 Oct 2009 11:45:08 +0000 (12:45 +0100)
The OSS driver for Ensoniq SoundScape cards is broken after conversion
to mutexes and a new ALSA snd-sscape driver handles all devices handled
by the OSS one.

The ALSA driver was tested with these cards:
Spea V7 MediaFX
Ensoniq Soundscape Elite
Ensoniq Soundscape VIVO (this card is not handled by the OSS driver)

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
sound/oss/Kconfig
sound/oss/Makefile
sound/oss/sscape.c [deleted file]

index bcf2a0698d5453b1c7a2bdf18f8a63bf14f1ea91..135a2b77cc4a767efb4fcb756ab7919bcd114d0e 100644 (file)
@@ -287,18 +287,6 @@ config SOUND_DMAP
 
          Say Y unless you have 16MB or more RAM or a PCI sound card.
 
-config SOUND_SSCAPE
-       tristate "Ensoniq SoundScape support"
-       help
-         Answer Y if you have a sound card based on the Ensoniq SoundScape
-         chipset. Such cards are being manufactured at least by Ensoniq, Spea
-         and Reveal (Reveal makes also other cards).
-
-         If you compile the driver into the kernel, you have to add
-         "sscape=<io>,<irq>,<dma>,<mpuio>,<mpuirq>" to the kernel command
-         line.
-
-
 config SOUND_VMIDI
        tristate "Loopback MIDI device support"
        help
index e0ae4d4d6a5ceff3b5b78eaf742a13cd0043060f..567b8a74178a36bfca43a3f7b1a408a60bfec922 100644 (file)
@@ -13,7 +13,6 @@ obj-$(CONFIG_SOUND_SH_DAC_AUDIO)      += sh_dac_audio.o
 obj-$(CONFIG_SOUND_AEDSP16)    += aedsp16.o
 obj-$(CONFIG_SOUND_PSS)                += pss.o ad1848.o mpu401.o
 obj-$(CONFIG_SOUND_TRIX)       += trix.o ad1848.o sb_lib.o uart401.o
-obj-$(CONFIG_SOUND_SSCAPE)     += sscape.o ad1848.o mpu401.o
 obj-$(CONFIG_SOUND_MSS)                += ad1848.o
 obj-$(CONFIG_SOUND_PAS)                += pas2.o sb.o sb_lib.o uart401.o
 obj-$(CONFIG_SOUND_SB)         += sb.o sb_lib.o uart401.o
diff --git a/sound/oss/sscape.c b/sound/oss/sscape.c
deleted file mode 100644 (file)
index 30c36d1..0000000
+++ /dev/null
@@ -1,1480 +0,0 @@
-/*
- * sound/oss/sscape.c
- *
- * Low level driver for Ensoniq SoundScape
- *
- *
- * Copyright (C) by Hannu Savolainen 1993-1997
- *
- * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL)
- * Version 2 (June 1991). See the "COPYING" file distributed with this software
- * for more info.
- *
- *
- * Thomas Sailer       : ioctl code reworked (vmalloc/vfree removed)
- * Sergey Smitienko    : ensoniq p'n'p support
- * Christoph Hellwig   : adapted to module_init/module_exit
- * Bartlomiej Zolnierkiewicz : added __init to attach_sscape()
- * Chris Rankin                : Specify that this module owns the coprocessor
- * Arnaldo C. de Melo  : added missing restore_flags in sscape_pnp_upload_file
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-
-#include "sound_config.h"
-#include "sound_firmware.h"
-
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/signal.h>
-#include <linux/fcntl.h>
-#include <linux/ctype.h>
-#include <linux/stddef.h>
-#include <linux/kmod.h>
-#include <asm/dma.h>
-#include <asm/io.h>
-#include <linux/wait.h>
-#include <linux/slab.h>
-#include <linux/ioport.h>
-#include <linux/delay.h>
-#include <linux/proc_fs.h>
-#include <linux/mm.h>
-#include <linux/spinlock.h>
-
-#include "coproc.h"
-
-#include "ad1848.h"
-#include "mpu401.h"
-
-/*
- *    I/O ports
- */
-#define MIDI_DATA       0
-#define MIDI_CTRL       1
-#define HOST_CTRL       2
-#define TX_READY       0x02
-#define RX_READY       0x01
-#define HOST_DATA       3
-#define ODIE_ADDR       4
-#define ODIE_DATA       5
-
-/*
- *    Indirect registers
- */
-
-#define GA_INTSTAT_REG 0
-#define GA_INTENA_REG  1
-#define GA_DMAA_REG    2
-#define GA_DMAB_REG    3
-#define GA_INTCFG_REG  4
-#define GA_DMACFG_REG  5
-#define GA_CDCFG_REG   6
-#define GA_SMCFGA_REG  7
-#define GA_SMCFGB_REG  8
-#define GA_HMCTL_REG   9
-
-/*
- * DMA channel identifiers (A and B)
- */
-
-#define SSCAPE_DMA_A   0
-#define SSCAPE_DMA_B   1
-
-#define PORT(name)     (devc->base+name)
-
-/*
- * Host commands recognized by the OBP microcode
- */
-#define CMD_GEN_HOST_ACK       0x80
-#define CMD_GEN_MPU_ACK                0x81
-#define CMD_GET_BOARD_TYPE     0x82
-#define CMD_SET_CONTROL                0x88    /* Old firmware only */
-#define CMD_GET_CONTROL                0x89    /* Old firmware only */
-#define CTL_MASTER_VOL         0
-#define CTL_MIC_MODE           2
-#define CTL_SYNTH_VOL          4
-#define CTL_WAVE_VOL           7
-#define CMD_SET_EXTMIDI                0x8a
-#define CMD_GET_EXTMIDI                0x8b
-#define CMD_SET_MT32           0x8c
-#define CMD_GET_MT32           0x8d
-
-#define CMD_ACK                        0x80
-
-#define        IC_ODIE                 1
-#define        IC_OPUS                 2
-
-typedef struct sscape_info
-{
-       int     base, irq, dma;
-       
-       int     codec, codec_irq;       /* required to setup pnp cards*/
-       int     codec_type;
-       int     ic_type;
-       char*   raw_buf;
-       unsigned long   raw_buf_phys;
-       int     buffsize;               /* -------------------------- */
-       spinlock_t lock;
-       int     ok;     /* Properly detected */
-       int     failed;
-       int     dma_allocated;
-       int     codec_audiodev;
-       int     opened;
-       int     *osp;
-       int     my_audiodev;
-} sscape_info;
-
-static struct sscape_info adev_info = {
-       0
-};
-
-static struct sscape_info *devc = &adev_info;
-static int sscape_mididev = -1;
-
-/* Some older cards have assigned interrupt bits differently than new ones */
-static char valid_interrupts_old[] = {
-       9, 7, 5, 15
-};
-
-static char valid_interrupts_new[] = {
-       9, 5, 7, 10
-};
-
-static char *valid_interrupts = valid_interrupts_new;
-
-/*
- *     See the bottom of the driver. This can be set by spea =0/1.
- */
-#ifdef REVEAL_SPEA
-static char old_hardware = 1;
-#else
-static char old_hardware;
-#endif
-
-static void sleep(unsigned howlong)
-{
-       current->state = TASK_INTERRUPTIBLE;
-       schedule_timeout(howlong);
-}
-
-static unsigned char sscape_read(struct sscape_info *devc, int reg)
-{
-       unsigned long flags;
-       unsigned char val;
-
-       spin_lock_irqsave(&devc->lock,flags);
-       outb(reg, PORT(ODIE_ADDR));
-       val = inb(PORT(ODIE_DATA));
-       spin_unlock_irqrestore(&devc->lock,flags);
-       return val;
-}
-
-static void __sscape_write(int reg, int data)
-{
-       outb(reg, PORT(ODIE_ADDR));
-       outb(data, PORT(ODIE_DATA));
-}
-
-static void sscape_write(struct sscape_info *devc, int reg, int data)
-{
-       unsigned long flags;
-
-       spin_lock_irqsave(&devc->lock,flags);
-       __sscape_write(reg, data);
-       spin_unlock_irqrestore(&devc->lock,flags);
-}
-
-static unsigned char sscape_pnp_read_codec(sscape_info* devc, unsigned char reg)
-{
-       unsigned char res;
-       unsigned long flags;
-
-       spin_lock_irqsave(&devc->lock,flags);
-       outb( reg, devc -> codec);
-       res = inb (devc -> codec + 1);
-       spin_unlock_irqrestore(&devc->lock,flags);
-       return res;
-
-}
-
-static void sscape_pnp_write_codec(sscape_info* devc, unsigned char reg, unsigned char data)
-{
-       unsigned long flags;
-       
-       spin_lock_irqsave(&devc->lock,flags);
-       outb( reg, devc -> codec);
-       outb( data, devc -> codec + 1);
-       spin_unlock_irqrestore(&devc->lock,flags);
-}
-
-static void host_open(struct sscape_info *devc)
-{
-       outb((0x00), PORT(HOST_CTRL));  /* Put the board to the host mode */
-}
-
-static void host_close(struct sscape_info *devc)
-{
-       outb((0x03), PORT(HOST_CTRL));  /* Put the board to the MIDI mode */
-}
-
-static int host_write(struct sscape_info *devc, unsigned char *data, int count)
-{
-       unsigned long flags;
-       int i, timeout_val;
-
-       spin_lock_irqsave(&devc->lock,flags);
-       /*
-        * Send the command and data bytes
-        */
-
-       for (i = 0; i < count; i++)
-       {
-               for (timeout_val = 10000; timeout_val > 0; timeout_val--)
-                       if (inb(PORT(HOST_CTRL)) & TX_READY)
-                               break;
-
-               if (timeout_val <= 0)
-               {
-                               spin_unlock_irqrestore(&devc->lock,flags);
-                           return 0;
-               }
-               outb(data[i], PORT(HOST_DATA));
-       }
-       spin_unlock_irqrestore(&devc->lock,flags);
-       return 1;
-}
-
-static int host_read(struct sscape_info *devc)
-{
-       unsigned long flags;
-       int timeout_val;
-       unsigned char data;
-
-       spin_lock_irqsave(&devc->lock,flags);
-       /*
-        * Read a byte
-        */
-
-       for (timeout_val = 10000; timeout_val > 0; timeout_val--)
-               if (inb(PORT(HOST_CTRL)) & RX_READY)
-                       break;
-
-       if (timeout_val <= 0)
-       {
-               spin_unlock_irqrestore(&devc->lock,flags);
-               return -1;
-       }
-       data = inb(PORT(HOST_DATA));
-       spin_unlock_irqrestore(&devc->lock,flags);
-       return data;
-}
-
-#if 0 /* unused */
-static int host_command1(struct sscape_info *devc, int cmd)
-{
-       unsigned char buf[10];
-       buf[0] = (unsigned char) (cmd & 0xff);
-       return host_write(devc, buf, 1);
-}
-#endif /* unused */
-
-
-static int host_command2(struct sscape_info *devc, int cmd, int parm1)
-{
-       unsigned char buf[10];
-
-       buf[0] = (unsigned char) (cmd & 0xff);
-       buf[1] = (unsigned char) (parm1 & 0xff);
-
-       return host_write(devc, buf, 2);
-}
-
-static int host_command3(struct sscape_info *devc, int cmd, int parm1, int parm2)
-{
-       unsigned char buf[10];
-
-       buf[0] = (unsigned char) (cmd & 0xff);
-       buf[1] = (unsigned char) (parm1 & 0xff);
-       buf[2] = (unsigned char) (parm2 & 0xff);
-       return host_write(devc, buf, 3);
-}
-
-static void set_mt32(struct sscape_info *devc, int value)
-{
-       host_open(devc);
-       host_command2(devc, CMD_SET_MT32, value ? 1 : 0);
-       if (host_read(devc) != CMD_ACK)
-       {
-               /* printk( "SNDSCAPE: Setting MT32 mode failed\n"); */
-       }
-       host_close(devc);
-}
-
-static void set_control(struct sscape_info *devc, int ctrl, int value)
-{
-       host_open(devc);
-       host_command3(devc, CMD_SET_CONTROL, ctrl, value);
-       if (host_read(devc) != CMD_ACK)
-       {
-               /* printk( "SNDSCAPE: Setting control (%d) failed\n",  ctrl); */
-       }
-       host_close(devc);
-}
-
-static void do_dma(struct sscape_info *devc, int dma_chan, unsigned long buf, int blk_size, int mode)
-{
-       unsigned char temp;
-
-       if (dma_chan != SSCAPE_DMA_A)
-       {
-               printk(KERN_WARNING "soundscape: Tried to use DMA channel  != A. Why?\n");
-               return;
-       }
-       audio_devs[devc->codec_audiodev]->flags &= ~DMA_AUTOMODE;
-       DMAbuf_start_dma(devc->codec_audiodev, buf, blk_size, mode);
-       audio_devs[devc->codec_audiodev]->flags |= DMA_AUTOMODE;
-
-       temp = devc->dma << 4;  /* Setup DMA channel select bits */
-       if (devc->dma <= 3)
-               temp |= 0x80;   /* 8 bit DMA channel */
-
-       temp |= 1;              /* Trigger DMA */
-       sscape_write(devc, GA_DMAA_REG, temp);
-       temp &= 0xfe;           /* Clear DMA trigger */
-       sscape_write(devc, GA_DMAA_REG, temp);
-}
-
-static int verify_mpu(struct sscape_info *devc)
-{
-       /*
-        * The SoundScape board could be in three modes (MPU, 8250 and host).
-        * If the card is not in the MPU mode, enabling the MPU driver will
-        * cause infinite loop (the driver believes that there is always some
-        * received data in the buffer.
-        *
-        * Detect this by looking if there are more than 10 received MIDI bytes
-        * (0x00) in the buffer.
-        */
-
-       int i;
-
-       for (i = 0; i < 10; i++)
-       {
-               if (inb(devc->base + HOST_CTRL) & 0x80)
-                       return 1;
-
-               if (inb(devc->base) != 0x00)
-                       return 1;
-       }
-       printk(KERN_WARNING "SoundScape: The device is not in the MPU-401 mode\n");
-       return 0;
-}
-
-static int sscape_coproc_open(void *dev_info, int sub_device)
-{
-       if (sub_device == COPR_MIDI)
-       {
-               set_mt32(devc, 0);
-               if (!verify_mpu(devc))
-                       return -EIO;
-       }
-       return 0;
-}
-
-static void sscape_coproc_close(void *dev_info, int sub_device)
-{
-       struct sscape_info *devc = dev_info;
-       unsigned long   flags;
-
-       spin_lock_irqsave(&devc->lock,flags);
-       if (devc->dma_allocated)
-       {
-               __sscape_write(GA_DMAA_REG, 0x20);      /* DMA channel disabled */
-               devc->dma_allocated = 0;
-       }
-       spin_unlock_irqrestore(&devc->lock,flags);
-       return;
-}
-
-static void sscape_coproc_reset(void *dev_info)
-{
-}
-
-static int sscape_download_boot(struct sscape_info *devc, unsigned char *block, int size, int flag)
-{
-       unsigned long flags;
-       unsigned char temp;
-       volatile int done, timeout_val;
-       static unsigned char codec_dma_bits;
-
-       if (flag & CPF_FIRST)
-       {
-               /*
-                * First block. Have to allocate DMA and to reset the board
-                * before continuing.
-                */
-
-               spin_lock_irqsave(&devc->lock,flags);
-               codec_dma_bits = sscape_read(devc, GA_CDCFG_REG);
-
-               if (devc->dma_allocated == 0)
-                       devc->dma_allocated = 1;
-
-               spin_unlock_irqrestore(&devc->lock,flags);
-
-               sscape_write(devc, GA_HMCTL_REG, 
-                       (temp = sscape_read(devc, GA_HMCTL_REG)) & 0x3f);       /*Reset */
-
-               for (timeout_val = 10000; timeout_val > 0; timeout_val--)
-                       sscape_read(devc, GA_HMCTL_REG);        /* Delay */
-
-               /* Take board out of reset */
-               sscape_write(devc, GA_HMCTL_REG,
-                       (temp = sscape_read(devc, GA_HMCTL_REG)) | 0x80);
-       }
-       /*
-        * Transfer one code block using DMA
-        */
-       if (audio_devs[devc->codec_audiodev]->dmap_out->raw_buf == NULL)
-       {
-               printk(KERN_WARNING "soundscape: DMA buffer not available\n");
-               return 0;
-       }
-       memcpy(audio_devs[devc->codec_audiodev]->dmap_out->raw_buf, block, size);
-
-       spin_lock_irqsave(&devc->lock,flags);
-       
-       /******** INTERRUPTS DISABLED NOW ********/
-       
-       do_dma(devc, SSCAPE_DMA_A,
-              audio_devs[devc->codec_audiodev]->dmap_out->raw_buf_phys,
-              size, DMA_MODE_WRITE);
-
-       /*
-        * Wait until transfer completes.
-        */
-       
-       done = 0;
-       timeout_val = 30;
-       while (!done && timeout_val-- > 0)
-       {
-               int resid;
-
-               if (HZ / 50)
-                       sleep(HZ / 50);
-               clear_dma_ff(devc->dma);
-               if ((resid = get_dma_residue(devc->dma)) == 0)
-                       done = 1;
-       }
-
-       spin_unlock_irqrestore(&devc->lock,flags);
-       if (!done)
-               return 0;
-
-       if (flag & CPF_LAST)
-       {
-               /*
-                * Take the board out of reset
-                */
-               outb((0x00), PORT(HOST_CTRL));
-               outb((0x00), PORT(MIDI_CTRL));
-
-               temp = sscape_read(devc, GA_HMCTL_REG);
-               temp |= 0x40;
-               sscape_write(devc, GA_HMCTL_REG, temp); /* Kickstart the board */
-
-               /*
-                * Wait until the ODB wakes up
-                */
-               spin_lock_irqsave(&devc->lock,flags);
-               done = 0;
-               timeout_val = 5 * HZ;
-               while (!done && timeout_val-- > 0)
-               {
-                       unsigned char x;
-                       
-                       sleep(1);
-                       x = inb(PORT(HOST_DATA));
-                       if (x == 0xff || x == 0xfe)             /* OBP startup acknowledge */
-                       {
-                               DDB(printk("Soundscape: Acknowledge = %x\n", x));
-                               done = 1;
-                       }
-               }
-               sscape_write(devc, GA_CDCFG_REG, codec_dma_bits);
-
-               spin_unlock_irqrestore(&devc->lock,flags);
-               if (!done)
-               {
-                       printk(KERN_ERR "soundscape: The OBP didn't respond after code download\n");
-                       return 0;
-               }
-               spin_lock_irqsave(&devc->lock,flags);
-               done = 0;
-               timeout_val = 5 * HZ;
-               while (!done && timeout_val-- > 0)
-               {
-                       sleep(1);
-                       if (inb(PORT(HOST_DATA)) == 0xfe)       /* Host startup acknowledge */
-                               done = 1;
-               }
-               spin_unlock_irqrestore(&devc->lock,flags);
-               if (!done)
-               {
-                       printk(KERN_ERR "soundscape: OBP Initialization failed.\n");
-                       return 0;
-               }
-               printk(KERN_INFO "SoundScape board initialized OK\n");
-               set_control(devc, CTL_MASTER_VOL, 100);
-               set_control(devc, CTL_SYNTH_VOL, 100);
-
-#ifdef SSCAPE_DEBUG3
-               /*
-                * Temporary debugging aid. Print contents of the registers after
-                * downloading the code.
-                */
-               {
-                       int i;
-
-                       for (i = 0; i < 13; i++)
-                               printk("I%d = %02x (new value)\n", i, sscape_read(devc, i));
-               }
-#endif
-
-       }
-       return 1;
-}
-
-static int download_boot_block(void *dev_info, copr_buffer * buf)
-{
-       if (buf->len <= 0 || buf->len > sizeof(buf->data))
-               return -EINVAL;
-
-       if (!sscape_download_boot(devc, buf->data, buf->len, buf->flags))
-       {
-               printk(KERN_ERR "soundscape: Unable to load microcode block to the OBP.\n");
-               return -EIO;
-       }
-       return 0;
-}
-
-static int sscape_coproc_ioctl(void *dev_info, unsigned int cmd, void __user *arg, int local)
-{
-       copr_buffer *buf;
-       int err;
-
-       switch (cmd) 
-       {
-               case SNDCTL_COPR_RESET:
-                       sscape_coproc_reset(dev_info);
-                       return 0;
-
-               case SNDCTL_COPR_LOAD:
-                       buf = (copr_buffer *) vmalloc(sizeof(copr_buffer));
-                       if (buf == NULL)
-                               return -ENOSPC;
-                       if (copy_from_user(buf, arg, sizeof(copr_buffer))) 
-                       {
-                               vfree(buf);
-                               return -EFAULT;
-                       }
-                       err = download_boot_block(dev_info, buf);
-                       vfree(buf);
-                       return err;
-               
-               default:
-                       return -EINVAL;
-       }
-}
-
-static coproc_operations sscape_coproc_operations =
-{
-       "SoundScape M68K",
-       THIS_MODULE,
-       sscape_coproc_open,
-       sscape_coproc_close,
-       sscape_coproc_ioctl,
-       sscape_coproc_reset,
-       &adev_info
-};
-
-static struct resource *sscape_ports;
-static int sscape_is_pnp;
-
-static void __init attach_sscape(struct address_info *hw_config)
-{
-#ifndef SSCAPE_REGS
-       /*
-        * Config register values for Spea/V7 Media FX and Ensoniq S-2000.
-        * These values are card
-        * dependent. If you have another SoundScape based card, you have to
-        * find the correct values. Do the following:
-        *  - Compile this driver with SSCAPE_DEBUG1 defined.
-        *  - Shut down and power off your machine.
-        *  - Boot with DOS so that the SSINIT.EXE program is run.
-        *  - Warm boot to {Linux|SYSV|BSD} and write down the lines displayed
-        *    when detecting the SoundScape.
-        *  - Modify the following list to use the values printed during boot.
-        *    Undefine the SSCAPE_DEBUG1
-        */
-#define SSCAPE_REGS { \
-/* I0 */       0x00, \
-/* I1 */       0xf0, /* Note! Ignored. Set always to 0xf0 */ \
-/* I2 */       0x20, /* Note! Ignored. Set always to 0x20 */ \
-/* I3 */       0x20, /* Note! Ignored. Set always to 0x20 */ \
-/* I4 */       0xf5, /* Ignored */ \
-/* I5 */       0x10, \
-/* I6 */       0x00, \
-/* I7 */       0x2e, /* I7 MEM config A. Likely to vary between models */ \
-/* I8 */       0x00, /* I8 MEM config B. Likely to vary between models */ \
-/* I9 */       0x40 /* Ignored */ \
-       }
-#endif
-
-       unsigned long   flags;
-       static unsigned char regs[10] = SSCAPE_REGS;
-
-       int i, irq_bits = 0xff;
-
-       if (old_hardware)
-       {
-               valid_interrupts = valid_interrupts_old;
-               conf_printf("Ensoniq SoundScape (old)", hw_config);
-       }
-       else
-               conf_printf("Ensoniq SoundScape", hw_config);
-
-       for (i = 0; i < 4; i++)
-       {
-               if (hw_config->irq == valid_interrupts[i])
-               {
-                       irq_bits = i;
-                       break;
-               }
-       }
-       if (hw_config->irq > 15 || (regs[4] = irq_bits == 0xff))
-       {
-               printk(KERN_ERR "Invalid IRQ%d\n", hw_config->irq);
-               release_region(devc->base, 2);
-               release_region(devc->base + 2, 6);
-               if (sscape_is_pnp)
-                       release_region(devc->codec, 2);
-               return;
-       }
-       
-       if (!sscape_is_pnp) {
-       
-               spin_lock_irqsave(&devc->lock,flags);
-               /* Host interrupt enable */
-               sscape_write(devc, 1, 0xf0);    /* All interrupts enabled */
-               /* DMA A status/trigger register */
-               sscape_write(devc, 2, 0x20);    /* DMA channel disabled */
-               /* DMA B status/trigger register */
-               sscape_write(devc, 3, 0x20);    /* DMA channel disabled */
-               /* Host interrupt config reg */
-               sscape_write(devc, 4, 0xf0 | (irq_bits << 2) | irq_bits);
-               /* Don't destroy CD-ROM DMA config bits (0xc0) */
-               sscape_write(devc, 5, (regs[5] & 0x3f) | (sscape_read(devc, 5) & 0xc0));
-               /* CD-ROM config (WSS codec actually) */
-               sscape_write(devc, 6, regs[6]);
-               sscape_write(devc, 7, regs[7]);
-               sscape_write(devc, 8, regs[8]);
-               /* Master control reg. Don't modify CR-ROM bits. Disable SB emul */
-               sscape_write(devc, 9, (sscape_read(devc, 9) & 0xf0) | 0x08);
-               spin_unlock_irqrestore(&devc->lock,flags);
-       }
-#ifdef SSCAPE_DEBUG2
-       /*
-        * Temporary debugging aid. Print contents of the registers after
-        * changing them.
-        */
-       {
-               int i;
-
-               for (i = 0; i < 13; i++)
-                       printk("I%d = %02x (new value)\n", i, sscape_read(devc, i));
-       }
-#endif
-
-       if (probe_mpu401(hw_config, sscape_ports))
-               hw_config->always_detect = 1;
-       hw_config->name = "SoundScape";
-
-       hw_config->irq *= -1;   /* Negative value signals IRQ sharing */
-       attach_mpu401(hw_config, THIS_MODULE);
-       hw_config->irq *= -1;   /* Restore it */
-
-       if (hw_config->slots[1] != -1)  /* The MPU driver installed itself */
-       {
-               sscape_mididev = hw_config->slots[1];
-               midi_devs[hw_config->slots[1]]->coproc = &sscape_coproc_operations;
-       }
-       sscape_write(devc, GA_INTENA_REG, 0x80);        /* Master IRQ enable */
-       devc->ok = 1;
-       devc->failed = 0;
-}
-
-static int detect_ga(sscape_info * devc)
-{
-       unsigned char save;
-
-       DDB(printk("Entered Soundscape detect_ga(%x)\n", devc->base));
-
-       /*
-        * First check that the address register of "ODIE" is
-        * there and that it has exactly 4 writable bits.
-        * First 4 bits
-        */
-       
-       if ((save = inb(PORT(ODIE_ADDR))) & 0xf0)
-       {
-               DDB(printk("soundscape: Detect error A\n"));
-               return 0;
-       }
-       outb((0x00), PORT(ODIE_ADDR));
-       if (inb(PORT(ODIE_ADDR)) != 0x00)
-       {
-               DDB(printk("soundscape: Detect error B\n"));
-               return 0;
-       }
-       outb((0xff), PORT(ODIE_ADDR));
-       if (inb(PORT(ODIE_ADDR)) != 0x0f)
-       {
-               DDB(printk("soundscape: Detect error C\n"));
-               return 0;
-       }
-       outb((save), PORT(ODIE_ADDR));
-
-       /*
-        * Now verify that some indirect registers return zero on some bits.
-        * This may break the driver with some future revisions of "ODIE" but...
-        */
-
-       if (sscape_read(devc, 0) & 0x0c)
-       {
-               DDB(printk("soundscape: Detect error D (%x)\n", sscape_read(devc, 0)));
-               return 0;
-       }
-       if (sscape_read(devc, 1) & 0x0f)
-       {
-               DDB(printk("soundscape: Detect error E\n"));
-               return 0;
-       }
-       if (sscape_read(devc, 5) & 0x0f)
-       {
-               DDB(printk("soundscape: Detect error F\n"));
-               return 0;
-       }
-       return 1;
-}
-
-static int sscape_read_host_ctrl(sscape_info* devc)
-{
-       return host_read(devc);
-}
-
-static void sscape_write_host_ctrl2(sscape_info *devc, int a, int b)
-{
-       host_command2(devc, a, b);
-}
-
-static int sscape_alloc_dma(sscape_info *devc)
-{
-       char *start_addr, *end_addr;
-       int dma_pagesize;
-       int sz, size;
-       struct page *page;
-
-       if (devc->raw_buf != NULL) return 0;    /* Already done */
-       dma_pagesize = (devc->dma < 4) ? (64 * 1024) : (128 * 1024);
-       devc->raw_buf = NULL;
-       devc->buffsize = 8192*4;
-       if (devc->buffsize > dma_pagesize) devc->buffsize = dma_pagesize;
-       start_addr = NULL;
-       /*
-        * Now loop until we get a free buffer. Try to get smaller buffer if
-        * it fails. Don't accept smaller than 8k buffer for performance
-        * reasons.
-        */
-       while (start_addr == NULL && devc->buffsize > PAGE_SIZE) {
-               for (sz = 0, size = PAGE_SIZE; size < devc->buffsize; sz++, size <<= 1);
-               devc->buffsize = PAGE_SIZE * (1 << sz);
-               start_addr = (char *) __get_free_pages(GFP_ATOMIC|GFP_DMA, sz);
-               if (start_addr == NULL) devc->buffsize /= 2;
-       }
-
-       if (start_addr == NULL) {
-               printk(KERN_ERR "sscape pnp init error: Couldn't allocate DMA buffer\n");
-               return 0;
-       } else {
-               /* make some checks */
-               end_addr = start_addr + devc->buffsize - 1;             
-               /* now check if it fits into the same dma-pagesize */
-
-               if (((long) start_addr & ~(dma_pagesize - 1)) != ((long) end_addr & ~(dma_pagesize - 1))
-                   || end_addr >= (char *) (MAX_DMA_ADDRESS)) {
-                       printk(KERN_ERR "sscape pnp: Got invalid address 0x%lx for %db DMA-buffer\n", (long) start_addr, devc->buffsize);
-                       return 0;
-               }
-       }
-       devc->raw_buf = start_addr;
-       devc->raw_buf_phys = virt_to_bus(start_addr);
-
-       for (page = virt_to_page(start_addr); page <= virt_to_page(end_addr); page++)
-               SetPageReserved(page);
-       return 1;
-}
-
-static void sscape_free_dma(sscape_info *devc)
-{
-       int sz, size;
-       unsigned long start_addr, end_addr;
-       struct page *page;
-
-       if (devc->raw_buf == NULL) return;
-       for (sz = 0, size = PAGE_SIZE; size < devc->buffsize; sz++, size <<= 1);
-       start_addr = (unsigned long) devc->raw_buf;
-       end_addr = start_addr + devc->buffsize;
-
-       for (page = virt_to_page(start_addr); page <= virt_to_page(end_addr); page++)
-               ClearPageReserved(page);
-
-       free_pages((unsigned long) devc->raw_buf, sz);
-       devc->raw_buf = NULL;
-}
-
-/* Intel version !!!!!!!!! */
-
-static int sscape_start_dma(int chan, unsigned long physaddr, int count, int dma_mode)
-{
-       unsigned long flags;
-
-       flags = claim_dma_lock();
-       disable_dma(chan);
-       clear_dma_ff(chan);
-       set_dma_mode(chan, dma_mode);
-       set_dma_addr(chan, physaddr);
-       set_dma_count(chan, count);
-       enable_dma(chan);
-       release_dma_lock(flags);
-       return 0;
-}
-
-static void sscape_pnp_start_dma(sscape_info* devc, int arg )
-{
-       int reg;
-       if (arg == 0) reg = 2;
-       else reg = 3;
-
-       sscape_write(devc, reg, sscape_read( devc, reg) | 0x01);
-       sscape_write(devc, reg, sscape_read( devc, reg) & 0xFE);
-}
-
-static int sscape_pnp_wait_dma (sscape_info* devc, int arg )
-{
-       int             reg;
-       unsigned long   i;
-       unsigned char   d;
-
-       if (arg == 0) reg = 2;
-       else reg = 3;
-
-       sleep ( 1 );
-       i = 0;
-       do {
-               d = sscape_read(devc, reg) & 1;
-               if ( d == 1)  break;
-               i++;
-       } while (i < 500000);
-       d = sscape_read(devc, reg) & 1; 
-       return d;
-}
-
-static int     sscape_pnp_alloc_dma(sscape_info* devc)
-{
-       /* printk(KERN_INFO "sscape: requesting dma\n"); */
-       if (request_dma(devc -> dma, "sscape")) return 0;
-       /* printk(KERN_INFO "sscape: dma channel allocated\n"); */
-       if (!sscape_alloc_dma(devc)) {
-               free_dma(devc -> dma);
-               return 0;
-       };
-       return 1;
-}
-
-static void    sscape_pnp_free_dma(sscape_info* devc)
-{
-       sscape_free_dma( devc);
-       free_dma(devc -> dma ); 
-       /* printk(KERN_INFO "sscape: dma released\n"); */
-}
-
-static int     sscape_pnp_upload_file(sscape_info* devc, char* fn)
-{      
-       int             done = 0;
-       int             timeout_val;
-       char*           data,*dt;
-       int             len,l;
-       unsigned long   flags;
-
-       sscape_write( devc, 9, sscape_read(devc, 9 )  & 0x3F );
-       sscape_write( devc, 2, (devc -> dma << 4) | 0x80 );
-       sscape_write( devc, 3, 0x20 );
-       sscape_write( devc, 9, sscape_read( devc, 9 )  | 0x80 );
-       
-       len = mod_firmware_load(fn, &data);
-       if (len == 0) {
-                   printk(KERN_ERR "sscape: file not found: %s\n", fn);
-                   return 0;
-       }
-       dt = data;
-       spin_lock_irqsave(&devc->lock,flags);
-       while ( len > 0 ) {
-               if (len > devc -> buffsize) l = devc->buffsize;
-               else l = len;
-               len -= l;               
-               memcpy(devc->raw_buf, dt, l); dt += l;
-               sscape_start_dma(devc->dma, devc->raw_buf_phys, l, 0x48);
-               sscape_pnp_start_dma ( devc, 0 );
-               if (sscape_pnp_wait_dma ( devc, 0 ) == 0) {
-                       spin_unlock_irqrestore(&devc->lock,flags);
-                       return 0;
-               }
-       }
-       
-       spin_unlock_irqrestore(&devc->lock,flags);
-       vfree(data);
-       
-       outb(0, devc -> base + 2);
-       outb(0, devc -> base);
-
-       sscape_write ( devc, 9, sscape_read( devc, 9 ) | 0x40);
-
-       timeout_val = 5 * HZ; 
-       while (!done && timeout_val-- > 0)
-       {
-               unsigned char x;
-               sleep(1);
-               x = inb( devc -> base + 3);
-               if (x == 0xff || x == 0xfe)             /* OBP startup acknowledge */
-               {
-                       //printk(KERN_ERR "Soundscape: Acknowledge = %x\n", x);
-                       done = 1;
-               }
-       }
-       timeout_val = 5 * HZ;
-       done = 0;
-       while (!done && timeout_val-- > 0)
-       {
-               unsigned char x;
-               sleep(1);
-               x = inb( devc -> base + 3);
-               if (x == 0xfe)          /* OBP startup acknowledge */
-               {
-                       //printk(KERN_ERR "Soundscape: Acknowledge = %x\n", x);
-                       done = 1;
-               }
-       }
-
-       if ( !done ) printk(KERN_ERR "soundscape: OBP Initialization failed.\n");
-
-       sscape_write( devc, 2, devc->ic_type == IC_ODIE ? 0x70 : 0x40);
-       sscape_write( devc, 3, (devc -> dma << 4) + 0x80);
-       return 1;
-}
-
-static void __init sscape_pnp_init_hw(sscape_info* devc)
-{      
-       unsigned char midi_irq = 0, sb_irq = 0;
-       unsigned i;
-       static  char code_file_name[23] = "/sndscape/sndscape.cox";
-       
-       int sscape_joystic_enable       = 0x7f;
-       int sscape_mic_enable           = 0;
-       int sscape_ext_midi             = 0;            
-
-       if ( !sscape_pnp_alloc_dma(devc) ) {
-               printk(KERN_ERR "sscape: faild to allocate dma\n");
-               return;
-       }
-
-       for (i = 0; i < 4; i++) {
-               if ( devc -> irq   == valid_interrupts[i] ) 
-                       midi_irq = i;
-               if ( devc -> codec_irq == valid_interrupts[i] ) 
-                       sb_irq = i;
-       }
-
-       sscape_write( devc, 5, 0x50);
-       sscape_write( devc, 7, 0x2e);
-       sscape_write( devc, 8, 0x00);
-
-       sscape_write( devc, 2, devc->ic_type == IC_ODIE ? 0x70 : 0x40);
-       sscape_write( devc, 3, ( devc -> dma << 4) | 0x80);
-
-       sscape_write (devc, 4, 0xF0 | (midi_irq<<2) | midi_irq);
-
-       i = 0x10; //sscape_read(devc, 9) & (devc->ic_type == IC_ODIE ? 0xf0 : 0xc0);
-       if (sscape_joystic_enable) i |= 8;
-       
-       sscape_write (devc, 9, i);
-       sscape_write (devc, 6, 0x80);
-       sscape_write (devc, 1, 0x80);
-
-       if (devc -> codec_type == 2) {
-               sscape_pnp_write_codec( devc, 0x0C, 0x50);
-               sscape_pnp_write_codec( devc, 0x10, sscape_pnp_read_codec( devc, 0x10) & 0x3F);
-               sscape_pnp_write_codec( devc, 0x11, sscape_pnp_read_codec( devc, 0x11) | 0xC0);
-               sscape_pnp_write_codec( devc, 29, 0x20);
-       }
-
-       if (sscape_pnp_upload_file(devc, "/sndscape/scope.cod") == 0 ) {
-               printk(KERN_ERR "sscape: faild to upload file /sndscape/scope.cod\n");
-               sscape_pnp_free_dma(devc);
-               return;
-       }
-
-       i = sscape_read_host_ctrl( devc );
-       
-       if ( (i & 0x0F) >  7 ) {
-               printk(KERN_ERR "sscape: scope.cod faild\n");
-               sscape_pnp_free_dma(devc);
-               return;
-       }
-       if ( i & 0x10 ) sscape_write( devc, 7, 0x2F);
-       code_file_name[21] = (char) ( i & 0x0F) + 0x30;
-       if (sscape_pnp_upload_file( devc, code_file_name) == 0) {
-               printk(KERN_ERR "sscape: faild to upload file %s\n", code_file_name);
-               sscape_pnp_free_dma(devc);
-               return;
-       }
-       
-       if (devc->ic_type != IC_ODIE) {
-               sscape_pnp_write_codec( devc, 10, (sscape_pnp_read_codec(devc, 10) & 0x7f) |
-                ( sscape_mic_enable == 0 ? 0x00 : 0x80) );
-       }
-       sscape_write_host_ctrl2( devc, 0x84, 0x64 );  /* MIDI volume */
-       sscape_write_host_ctrl2( devc, 0x86, 0x64 );  /* MIDI volume?? */
-       sscape_write_host_ctrl2( devc, 0x8A, sscape_ext_midi);
-
-       sscape_pnp_write_codec ( devc, 6, 0x3f ); //WAV_VOL
-       sscape_pnp_write_codec ( devc, 7, 0x3f ); //WAV_VOL
-       sscape_pnp_write_codec ( devc, 2, 0x1F ); //WD_CDXVOLL
-       sscape_pnp_write_codec ( devc, 3, 0x1F ); //WD_CDXVOLR
-
-       if (devc -> codec_type == 1) {
-               sscape_pnp_write_codec ( devc, 4, 0x1F );
-               sscape_pnp_write_codec ( devc, 5, 0x1F );
-               sscape_write_host_ctrl2( devc, 0x88, sscape_mic_enable);
-       } else {
-               int t;
-               sscape_pnp_write_codec ( devc, 0x10, 0x1F << 1);
-               sscape_pnp_write_codec ( devc, 0x11, 0xC0 | (0x1F << 1));
-
-               t = sscape_pnp_read_codec( devc, 0x00) & 0xDF;
-               if ( (sscape_mic_enable == 0)) t |= 0;
-               else t |= 0x20;
-               sscape_pnp_write_codec ( devc, 0x00, t);
-               t = sscape_pnp_read_codec( devc, 0x01) & 0xDF;
-               if ( (sscape_mic_enable == 0) ) t |= 0;
-               else t |= 0x20;
-               sscape_pnp_write_codec ( devc, 0x01, t);
-               sscape_pnp_write_codec ( devc, 0x40 | 29 , 0x20);
-               outb(0, devc -> codec);
-       }
-       if (devc -> ic_type == IC_OPUS ) {
-               int i = sscape_read( devc, 9 );
-               sscape_write( devc, 9, i | 3 );
-               sscape_write( devc, 3, 0x40);
-
-               if (request_region(0x228, 1, "sscape setup junk")) {
-                       outb(0, 0x228);
-                       release_region(0x228,1);
-               }
-               sscape_write( devc, 3, (devc -> dma << 4) | 0x80);
-               sscape_write( devc, 9, i );
-       }
-       
-       host_close ( devc );
-       sscape_pnp_free_dma(devc);
-}
-
-static int __init detect_sscape_pnp(sscape_info* devc)
-{
-       long     i, irq_bits = 0xff;
-       unsigned int d;
-
-       DDB(printk("Entered detect_sscape_pnp(%x)\n", devc->base));
-
-       if (!request_region(devc->codec, 2, "sscape codec")) {
-               printk(KERN_ERR "detect_sscape_pnp: port %x is not free\n", devc->codec);       
-               return 0;
-       }
-
-       if ((inb(devc->base + 2) & 0x78) != 0)
-               goto fail;
-
-       d = inb ( devc -> base + 4) & 0xF0;
-       if (d & 0x80)
-               goto fail;
-       
-       if (d == 0) {
-               devc->codec_type = 1;
-               devc->ic_type = IC_ODIE;
-       } else if ( (d & 0x60) != 0) {
-               devc->codec_type = 2;
-               devc->ic_type = IC_OPUS;
-       } else if ( (d & 0x40) != 0) {  /* WTF? */
-               devc->codec_type = 2;
-               devc->ic_type = IC_ODIE;
-       } else
-               goto fail;
-       
-       sscape_is_pnp = 1;
-               
-       outb(0xFA, devc -> base+4);
-       if  ((inb( devc -> base+4) & 0x9F) != 0x0A)
-               goto fail;
-       outb(0xFE, devc -> base+4);
-       if  ( (inb(devc -> base+4) & 0x9F) != 0x0E)
-               goto fail;
-       if  ( (inb(devc -> base+5) & 0x9F) != 0x0E)
-               goto fail;
-
-       if (devc->codec_type == 2) {
-               if (devc->codec != devc->base + 8) {
-                       printk("soundscape warning: incorrect codec port specified\n");
-                       goto fail;
-               }
-               d = 0x10 | (sscape_read(devc, 9)  & 0xCF);
-               sscape_write(devc, 9, d);
-               sscape_write(devc, 6, 0x80);
-       } else {
-               //todo: check codec is not base + 8
-       }
-
-       d  = (sscape_read(devc, 9) & 0x3F) | 0xC0;
-       sscape_write(devc, 9, d);
-
-       for (i = 0; i < 550000; i++)
-               if ( !(inb(devc -> codec) & 0x80) ) break;
-
-       d = inb(devc -> codec);
-       if (d & 0x80)
-               goto fail;
-       if ( inb(devc -> codec + 2) == 0xFF)
-               goto fail;
-
-       sscape_write(devc, 9, sscape_read(devc, 9)  & 0x3F );
-
-       d  = inb(devc -> codec) & 0x80;
-       if ( d == 0) {
-               printk(KERN_INFO "soundscape: hardware detected\n");
-               valid_interrupts = valid_interrupts_new;
-       } else  {
-               printk(KERN_INFO "soundscape: board looks like media fx\n");
-               valid_interrupts = valid_interrupts_old;
-               old_hardware = 1;
-       }
-
-       sscape_write( devc, 9, 0xC0 | (sscape_read(devc, 9)  & 0x3F) );
-
-       for (i = 0; i < 550000; i++)
-               if ( !(inb(devc -> codec) & 0x80)) 
-                       break;
-               
-       sscape_pnp_init_hw(devc);
-
-       for (i = 0; i < 4; i++)
-       {
-               if (devc->codec_irq == valid_interrupts[i]) {
-                       irq_bits = i;
-                       break;
-               }
-       }       
-       sscape_write(devc, GA_INTENA_REG, 0x00);
-       sscape_write(devc, GA_DMACFG_REG, 0x50);
-       sscape_write(devc, GA_DMAA_REG, 0x70);
-       sscape_write(devc, GA_DMAB_REG, 0x20);
-       sscape_write(devc, GA_INTCFG_REG, 0xf0);
-       sscape_write(devc, GA_CDCFG_REG, 0x89 | (devc->dma << 4) | (irq_bits << 1));
-
-       sscape_pnp_write_codec( devc, 0, sscape_pnp_read_codec( devc, 0) | 0x20);
-       sscape_pnp_write_codec( devc, 0, sscape_pnp_read_codec( devc, 1) | 0x20);
-
-       return 1;
-fail:
-       release_region(devc->codec, 2);
-       return 0;
-}
-
-static int __init probe_sscape(struct address_info *hw_config)
-{
-       devc->base = hw_config->io_base;
-       devc->irq = hw_config->irq;
-       devc->dma = hw_config->dma;
-       devc->osp = hw_config->osp;
-
-#ifdef SSCAPE_DEBUG1
-       /*
-        * Temporary debugging aid. Print contents of the registers before
-        * changing them.
-        */
-       {
-               int i;
-
-               for (i = 0; i < 13; i++)
-                       printk("I%d = %02x (old value)\n", i, sscape_read(devc, i));
-       }
-#endif
-       devc->failed = 1;
-
-       sscape_ports = request_region(devc->base, 2, "mpu401");
-       if (!sscape_ports)
-               return 0;
-
-       if (!request_region(devc->base + 2, 6, "SoundScape")) {
-               release_region(devc->base, 2);
-               return 0;
-       }
-
-       if (!detect_ga(devc)) {
-               if (detect_sscape_pnp(devc))
-                       return 1;
-               release_region(devc->base, 2);
-               release_region(devc->base + 2, 6);
-               return 0;
-       }
-
-       if (old_hardware)       /* Check that it's really an old Spea/Reveal card. */
-       {
-               unsigned char   tmp;
-               int             cc;
-
-               if (!((tmp = sscape_read(devc, GA_HMCTL_REG)) & 0xc0))
-               {
-                       sscape_write(devc, GA_HMCTL_REG, tmp | 0x80);
-                       for (cc = 0; cc < 200000; ++cc)
-                               inb(devc->base + ODIE_ADDR);
-               }
-       }
-       return 1;
-}
-
-static int __init init_ss_ms_sound(struct address_info *hw_config)
-{
-       int i, irq_bits = 0xff;
-       int ad_flags = 0;
-       struct resource *ports;
-       
-       if (devc->failed)
-       {
-               printk(KERN_ERR "soundscape: Card not detected\n");
-               return 0;
-       }
-       if (devc->ok == 0)
-       {
-               printk(KERN_ERR "soundscape: Invalid initialization order.\n");
-               return 0;
-       }
-       for (i = 0; i < 4; i++)
-       {
-               if (hw_config->irq == valid_interrupts[i])
-               {
-                       irq_bits = i;
-                       break;
-               }
-       }
-       if (irq_bits == 0xff) {
-               printk(KERN_ERR "soundscape: Invalid MSS IRQ%d\n", hw_config->irq);
-               return 0;
-       }
-       
-       if (old_hardware)
-               ad_flags = 0x12345677;  /* Tell that we may have a CS4248 chip (Spea-V7 Media FX) */
-       else if (sscape_is_pnp)
-               ad_flags = 0x87654321;  /* Tell that we have a soundscape pnp with 1845 chip */
-
-       ports = request_region(hw_config->io_base, 4, "ad1848");
-       if (!ports) {
-               printk(KERN_ERR "soundscape: ports busy\n");
-               return 0;
-       }
-
-       if (!ad1848_detect(ports, &ad_flags, hw_config->osp)) {
-               release_region(hw_config->io_base, 4);
-               return 0;
-       }
-
-       if (!sscape_is_pnp)  /*pnp is already setup*/
-       {
-               /*
-                * Setup the DMA polarity.
-                */
-               sscape_write(devc, GA_DMACFG_REG, 0x50);
-       
-               /*
-                * Take the gate-array off of the DMA channel.
-                */
-               sscape_write(devc, GA_DMAB_REG, 0x20);
-       
-               /*
-                * Init the AD1848 (CD-ROM) config reg.
-                */
-               sscape_write(devc, GA_CDCFG_REG, 0x89 | (hw_config->dma << 4) | (irq_bits << 1));
-       }
-       
-       if (hw_config->irq == devc->irq)
-               printk(KERN_WARNING "soundscape: Warning! The WSS mode can't share IRQ with MIDI\n");
-                               
-       hw_config->slots[0] = ad1848_init(
-                       sscape_is_pnp ? "SoundScape" : "SoundScape PNP",
-                       ports,
-                       hw_config->irq,
-                       hw_config->dma,
-                       hw_config->dma,
-                       0,
-                       devc->osp,
-                       THIS_MODULE);
-
-                                         
-       if (hw_config->slots[0] != -1)  /* The AD1848 driver installed itself */
-       {
-               audio_devs[hw_config->slots[0]]->coproc = &sscape_coproc_operations;
-               devc->codec_audiodev = hw_config->slots[0];
-               devc->my_audiodev = hw_config->slots[0];
-
-               /* Set proper routings here (what are they) */
-               AD1848_REROUTE(SOUND_MIXER_LINE1, SOUND_MIXER_LINE);
-       }
-               
-#ifdef SSCAPE_DEBUG5
-       /*
-        * Temporary debugging aid. Print contents of the registers
-        * after the AD1848 device has been initialized.
-        */
-       {
-               int i;
-
-               for (i = 0; i < 13; i++)
-                       printk("I%d = %02x\n", i, sscape_read(devc, i));
-       }
-#endif
-       return 1;
-}
-
-static void __exit unload_sscape(struct address_info *hw_config)
-{
-       release_region(devc->base + 2, 6);
-       unload_mpu401(hw_config);
-       if (sscape_is_pnp)
-               release_region(devc->codec, 2);
-}
-
-static void __exit unload_ss_ms_sound(struct address_info *hw_config)
-{
-       ad1848_unload(hw_config->io_base,
-                     hw_config->irq,
-                     devc->dma,
-                     devc->dma,
-                     0);
-       sound_unload_audiodev(hw_config->slots[0]);
-}
-
-static struct address_info cfg;
-static struct address_info cfg_mpu;
-
-static int __initdata spea = -1;
-static int mss = 0;
-static int __initdata dma = -1;
-static int __initdata irq = -1;
-static int __initdata io = -1;
-static int __initdata mpu_irq = -1;
-static int __initdata mpu_io = -1;
-
-module_param(dma, int, 0);
-module_param(irq, int, 0);
-module_param(io, int, 0);
-module_param(spea, int, 0);            /* spea=0/1 set the old_hardware */
-module_param(mpu_irq, int, 0);
-module_param(mpu_io, int, 0);
-module_param(mss, int, 0);
-
-static int __init init_sscape(void)
-{
-       printk(KERN_INFO "Soundscape driver Copyright (C) by Hannu Savolainen 1993-1996\n");
-       
-       cfg.irq = irq;
-       cfg.dma = dma;
-       cfg.io_base = io;
-
-       cfg_mpu.irq = mpu_irq;
-       cfg_mpu.io_base = mpu_io;
-       /* WEH - Try to get right dma channel */
-        cfg_mpu.dma = dma;
-       
-       devc->codec = cfg.io_base;
-       devc->codec_irq = cfg.irq;
-       devc->codec_type = 0;
-       devc->ic_type = 0;
-       devc->raw_buf = NULL;
-       spin_lock_init(&devc->lock);
-
-       if (cfg.dma == -1 || cfg.irq == -1 || cfg.io_base == -1) {
-               printk(KERN_ERR "DMA, IRQ, and IO port must be specified.\n");
-               return -EINVAL;
-       }
-       
-       if (cfg_mpu.irq == -1 && cfg_mpu.io_base != -1) {
-               printk(KERN_ERR "MPU_IRQ must be specified if MPU_IO is set.\n");
-               return -EINVAL;
-       }
-       
-       if(spea != -1) {
-               old_hardware = spea;
-               printk(KERN_INFO "Forcing %s hardware support.\n",
-                       spea?"new":"old");
-       }       
-       if (probe_sscape(&cfg_mpu) == 0)
-               return -ENODEV;
-
-       attach_sscape(&cfg_mpu);
-       
-       mss = init_ss_ms_sound(&cfg);
-
-       return 0;
-}
-
-static void __exit cleanup_sscape(void)
-{
-       if (mss)
-               unload_ss_ms_sound(&cfg);
-       unload_sscape(&cfg_mpu);
-}
-
-module_init(init_sscape);
-module_exit(cleanup_sscape);
-
-#ifndef MODULE
-static int __init setup_sscape(char *str)
-{
-       /* io, irq, dma, mpu_io, mpu_irq */
-       int ints[6];
-       
-       str = get_options(str, ARRAY_SIZE(ints), ints);
-       
-       io      = ints[1];
-       irq     = ints[2];
-       dma     = ints[3];
-       mpu_io  = ints[4];
-       mpu_irq = ints[5];
-
-       return 1;
-}
-
-__setup("sscape=", setup_sscape);
-#endif
-MODULE_LICENSE("GPL");