ARM: bcm2835: fix clock DT node names

DT nodes should be named according to the type of object that they
represent rather than the identity. DT nodes that contain a reg
property should include a unit address in their name. Fix these issues.

Add clock-output-names properties to the nodes so that the clocks get
named something meaningful. This works around the fact that the fixed
clock driver names clocks after the short node name, i.e. not including
the unit address.

Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>

diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi
index a2d48893230ca675447d101d255ca552b3b1797a..b8473c43e88827de921d727001ef7871704736c7 100644 (file)
--- a/arch/arm/boot/dts/bcm2835.dtsi
+++ b/arch/arm/boot/dts/bcm2835.dtsi
@@ -155,24 +155,27 @@
                #address-cells = <1>;
                #size-cells = <0>;
 
-               clk_mmc: mmc {
+               clk_mmc: clock@0 {
                        compatible = "fixed-clock";
                        reg = <0>;
                        #clock-cells = <0>;
+                       clock-output-names = "mmc";
                        clock-frequency = <100000000>;
                };
 
-               clk_i2c: i2c {
+               clk_i2c: clock@1 {
                        compatible = "fixed-clock";
                        reg = <1>;
                        #clock-cells = <0>;
+                       clock-output-names = "i2c";
                        clock-frequency = <250000000>;
                };
 
-               clk_spi: spi {
+               clk_spi: clock@2 {
                        compatible = "fixed-clock";
                        reg = <2>;
                        #clock-cells = <0>;
+                       clock-output-names = "spi";
                        clock-frequency = <250000000>;
                };
        };