iwlwifi: fix more eeprom endian bugs
authorJohannes Berg <johannes@sipsolutions.net>
Mon, 14 Dec 2009 22:12:09 +0000 (14:12 -0800)
committerJohn W. Linville <linville@tuxdriver.com>
Mon, 21 Dec 2009 16:32:07 +0000 (11:32 -0500)
I've also for a long time had a problem with the
temperature calculation code, which I had fixed
by byte-swapping the values, and now it turns out
that was the correct fix after all.

Also, any use of iwl_eeprom_query_addr() that is
for more than a u8 must be cast to little endian,
and some structs as well.

Fix all this. Again, no real impact on platforms
that already are little endian.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Cc: stable@kernel.org
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
drivers/net/wireless/iwlwifi/iwl-4965.c
drivers/net/wireless/iwlwifi/iwl-5000-hw.h
drivers/net/wireless/iwlwifi/iwl-5000.c
drivers/net/wireless/iwlwifi/iwl-eeprom.h

index 386513b601f5caff86e22c73d90e106015cdc8be..484c5fdf7c2a511143ed569ec11833f7d45d7424 100644 (file)
@@ -1204,7 +1204,7 @@ static int iwl4965_fill_txpower_tbl(struct iwl_priv *priv, u8 band, u16 channel,
        iwl4965_interpolate_chan(priv, channel, &ch_eeprom_info);
 
        /* calculate tx gain adjustment based on power supply voltage */
-       voltage = priv->calib_info->voltage;
+       voltage = le16_to_cpu(priv->calib_info->voltage);
        init_voltage = (s32)le32_to_cpu(priv->card_alive_init.voltage);
        voltage_compensation =
            iwl4965_get_voltage_compensation(voltage, init_voltage);
index 4ef6804a455af2e31259db3a048fe4360f20dfe1..bc056e9ab85f0e38f73f60614462f8d36236fa73 100644 (file)
 
 static inline s32 iwl_temp_calib_to_offset(struct iwl_priv *priv)
 {
-       u16 *temp_calib = (u16 *)iwl_eeprom_query_addr(priv,
-                                                      EEPROM_5000_TEMPERATURE);
-       /* offset =  temperature -  voltage / coef */
-       s32 offset = (s32)(temp_calib[0] - temp_calib[1] / IWL_5150_VOLTAGE_TO_TEMPERATURE_COEFF);
-       return offset;
+       u16 temperature, voltage;
+       __le16 *temp_calib =
+               (__le16 *)iwl_eeprom_query_addr(priv, EEPROM_5000_TEMPERATURE);
+
+       temperature = le16_to_cpu(temp_calib[0]);
+       voltage = le16_to_cpu(temp_calib[1]);
+
+       /* offset = temp - volt / coeff */
+       return (s32)(temperature - voltage / IWL_5150_VOLTAGE_TO_TEMPERATURE_COEFF);
 }
 
 /* Fixed (non-configurable) rx data from phy */
index e2f8615c8c9b77bf81004bc7e415133fc5b2eb74..33a5866538e7dbbbc0c7b0a13085075a59939fba 100644 (file)
@@ -333,14 +333,15 @@ static void iwl5000_set_ct_threshold(struct iwl_priv *priv)
 static int iwl5000_set_Xtal_calib(struct iwl_priv *priv)
 {
        struct iwl_calib_xtal_freq_cmd cmd;
-       u16 *xtal_calib = (u16 *)iwl_eeprom_query_addr(priv, EEPROM_5000_XTAL);
+       __le16 *xtal_calib =
+               (__le16 *)iwl_eeprom_query_addr(priv, EEPROM_5000_XTAL);
 
        cmd.hdr.op_code = IWL_PHY_CALIBRATE_CRYSTAL_FRQ_CMD;
        cmd.hdr.first_group = 0;
        cmd.hdr.groups_num = 1;
        cmd.hdr.data_valid = 1;
-       cmd.cap_pin1 = (u8)xtal_calib[0];
-       cmd.cap_pin2 = (u8)xtal_calib[1];
+       cmd.cap_pin1 = le16_to_cpu(xtal_calib[0]);
+       cmd.cap_pin2 = le16_to_cpu(xtal_calib[1]);
        return iwl_calib_set(&priv->calib_results[IWL_CALIB_XTAL],
                             (u8 *)&cmd, sizeof(cmd));
 }
index 5cd2b66bbe45235525c990f609021807704089ad..0cd9c02ee0441be719117a81037c2db9cd5993da 100644 (file)
@@ -137,7 +137,7 @@ struct iwl_eeprom_channel {
  *
  */
 struct iwl_eeprom_enhanced_txpwr {
-       u16 common;
+       __le16 common;
        s8 chain_a_max;
        s8 chain_b_max;
        s8 chain_c_max;
@@ -360,7 +360,7 @@ struct iwl_eeprom_calib_subband_info {
 struct iwl_eeprom_calib_info {
        u8 saturation_power24;  /* half-dBm (e.g. "34" = 17 dBm) */
        u8 saturation_power52;  /* half-dBm */
-       s16 voltage;            /* signed */
+       __le16 voltage;         /* signed */
        struct iwl_eeprom_calib_subband_info
                band_info[EEPROM_TX_POWER_BANDS];
 } __attribute__ ((packed));