* Driver for Dell laptop extras
*
* Copyright (c) Red Hat <mjg@redhat.com>
- * Copyright (c) 2014 Gabriele Mazzotta <gabriele.mzt@gmail.com>
- * Copyright (c) 2014 Pali Rohár <pali.rohar@gmail.com>
*
- * Based on documentation in the libsmbios package:
- * Copyright (C) 2005-2014 Dell Inc.
+ * Based on documentation in the libsmbios package, Copyright (C) 2005 Dell
+ * Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
#include "../../firmware/dcdbas.h"
#define BRIGHTNESS_TOKEN 0x7d
-#define KBD_LED_OFF_TOKEN 0x01E1
-#define KBD_LED_ON_TOKEN 0x01E2
-#define KBD_LED_AUTO_TOKEN 0x01E3
-#define KBD_LED_AUTO_25_TOKEN 0x02EA
-#define KBD_LED_AUTO_50_TOKEN 0x02EB
-#define KBD_LED_AUTO_75_TOKEN 0x02EC
-#define KBD_LED_AUTO_100_TOKEN 0x02F6
/* This structure will be modified by the firmware when we enter
* system management mode, hence the volatiles */
struct quirk_entry {
u8 touchpad_led;
-
- int needs_kbd_timeouts;
- /*
- * Ordered list of timeouts expressed in seconds.
- * The list must end with -1
- */
- int kbd_timeouts[];
};
static struct quirk_entry *quirks;
return 1;
}
-/*
- * These values come from Windows utility provided by Dell. If any other value
- * is used then BIOS silently set timeout to 0 without any error message.
- */
-static struct quirk_entry quirk_dell_xps13_9333 = {
- .needs_kbd_timeouts = 1,
- .kbd_timeouts = { 0, 5, 15, 60, 5 * 60, 15 * 60, -1 },
-};
-
static int da_command_address;
static int da_command_code;
static int da_num_tokens;
},
.driver_data = &quirk_dell_vostro_v130,
},
- {
- .callback = dmi_matched,
- .ident = "Dell XPS13 9333",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "XPS13 9333"),
- },
- .driver_data = &quirk_dell_xps13_9333,
- },
{ }
};
}
}
-static int find_token_id(int tokenid)
+static int find_token_location(int tokenid)
{
int i;
-
for (i = 0; i < da_num_tokens; i++) {
if (da_tokens[i].tokenID == tokenid)
- return i;
+ return da_tokens[i].location;
}
return -1;
}
-static int find_token_location(int tokenid)
-{
- int id;
-
- id = find_token_id(tokenid);
- if (id == -1)
- return -1;
-
- return da_tokens[id].location;
-}
-
static struct calling_interface_buffer *
dell_send_request(struct calling_interface_buffer *buffer, int class,
int select)
return buffer;
}
-static inline int dell_smi_error(int value)
-{
- switch (value) {
- case 0: /* Completed successfully */
- return 0;
- case -1: /* Completed with error */
- return -EIO;
- case -2: /* Function not supported */
- return -ENXIO;
- default: /* Unknown error */
- return -EINVAL;
- }
-}
-
/* Derived from information in DellWirelessCtl.cpp:
Class 17, select 11 is radio control. It returns an array of 32-bit values.
else
dell_send_request(buffer, 1, 1);
- out:
+out:
release_buffer();
return ret;
}
ret = buffer->output[1];
- out:
+out:
release_buffer();
return ret;
}
led_classdev_unregister(&touchpad_led);
}
-/*
- * Derived from information in smbios-keyboard-ctl:
- *
- * cbClass 4
- * cbSelect 11
- * Keyboard illumination
- * cbArg1 determines the function to be performed
- *
- * cbArg1 0x0 = Get Feature Information
- * cbRES1 Standard return codes (0, -1, -2)
- * cbRES2, word0 Bitmap of user-selectable modes
- * bit 0 Always off (All systems)
- * bit 1 Always on (Travis ATG, Siberia)
- * bit 2 Auto: ALS-based On; ALS-based Off (Travis ATG)
- * bit 3 Auto: ALS- and input-activity-based On; input-activity based Off
- * bit 4 Auto: Input-activity-based On; input-activity based Off
- * bit 5 Auto: Input-activity-based On (illumination level 25%); input-activity based Off
- * bit 6 Auto: Input-activity-based On (illumination level 50%); input-activity based Off
- * bit 7 Auto: Input-activity-based On (illumination level 75%); input-activity based Off
- * bit 8 Auto: Input-activity-based On (illumination level 100%); input-activity based Off
- * bits 9-15 Reserved for future use
- * cbRES2, byte2 Reserved for future use
- * cbRES2, byte3 Keyboard illumination type
- * 0 Reserved
- * 1 Tasklight
- * 2 Backlight
- * 3-255 Reserved for future use
- * cbRES3, byte0 Supported auto keyboard illumination trigger bitmap.
- * bit 0 Any keystroke
- * bit 1 Touchpad activity
- * bit 2 Pointing stick
- * bit 3 Any mouse
- * bits 4-7 Reserved for future use
- * cbRES3, byte1 Supported timeout unit bitmap
- * bit 0 Seconds
- * bit 1 Minutes
- * bit 2 Hours
- * bit 3 Days
- * bits 4-7 Reserved for future use
- * cbRES3, byte2 Number of keyboard light brightness levels
- * cbRES4, byte0 Maximum acceptable seconds value (0 if seconds not supported).
- * cbRES4, byte1 Maximum acceptable minutes value (0 if minutes not supported).
- * cbRES4, byte2 Maximum acceptable hours value (0 if hours not supported).
- * cbRES4, byte3 Maximum acceptable days value (0 if days not supported)
- *
- * cbArg1 0x1 = Get Current State
- * cbRES1 Standard return codes (0, -1, -2)
- * cbRES2, word0 Bitmap of current mode state
- * bit 0 Always off (All systems)
- * bit 1 Always on (Travis ATG, Siberia)
- * bit 2 Auto: ALS-based On; ALS-based Off (Travis ATG)
- * bit 3 Auto: ALS- and input-activity-based On; input-activity based Off
- * bit 4 Auto: Input-activity-based On; input-activity based Off
- * bit 5 Auto: Input-activity-based On (illumination level 25%); input-activity based Off
- * bit 6 Auto: Input-activity-based On (illumination level 50%); input-activity based Off
- * bit 7 Auto: Input-activity-based On (illumination level 75%); input-activity based Off
- * bit 8 Auto: Input-activity-based On (illumination level 100%); input-activity based Off
- * bits 9-15 Reserved for future use
- * Note: Only One bit can be set
- * cbRES2, byte2 Currently active auto keyboard illumination triggers.
- * bit 0 Any keystroke
- * bit 1 Touchpad activity
- * bit 2 Pointing stick
- * bit 3 Any mouse
- * bits 4-7 Reserved for future use
- * cbRES2, byte3 Current Timeout
- * bits 7:6 Timeout units indicator:
- * 00b Seconds
- * 01b Minutes
- * 10b Hours
- * 11b Days
- * bits 5:0 Timeout value (0-63) in sec/min/hr/day
- * NOTE: A value of 0 means always on (no timeout) if any bits of RES3 byte
- * are set upon return from the [Get feature information] call.
- * cbRES3, byte0 Current setting of ALS value that turns the light on or off.
- * cbRES3, byte1 Current ALS reading
- * cbRES3, byte2 Current keyboard light level.
- *
- * cbArg1 0x2 = Set New State
- * cbRES1 Standard return codes (0, -1, -2)
- * cbArg2, word0 Bitmap of current mode state
- * bit 0 Always off (All systems)
- * bit 1 Always on (Travis ATG, Siberia)
- * bit 2 Auto: ALS-based On; ALS-based Off (Travis ATG)
- * bit 3 Auto: ALS- and input-activity-based On; input-activity based Off
- * bit 4 Auto: Input-activity-based On; input-activity based Off
- * bit 5 Auto: Input-activity-based On (illumination level 25%); input-activity based Off
- * bit 6 Auto: Input-activity-based On (illumination level 50%); input-activity based Off
- * bit 7 Auto: Input-activity-based On (illumination level 75%); input-activity based Off
- * bit 8 Auto: Input-activity-based On (illumination level 100%); input-activity based Off
- * bits 9-15 Reserved for future use
- * Note: Only One bit can be set
- * cbArg2, byte2 Desired auto keyboard illumination triggers. Must remain inactive to allow
- * keyboard to turn off automatically.
- * bit 0 Any keystroke
- * bit 1 Touchpad activity
- * bit 2 Pointing stick
- * bit 3 Any mouse
- * bits 4-7 Reserved for future use
- * cbArg2, byte3 Desired Timeout
- * bits 7:6 Timeout units indicator:
- * 00b Seconds
- * 01b Minutes
- * 10b Hours
- * 11b Days
- * bits 5:0 Timeout value (0-63) in sec/min/hr/day
- * cbArg3, byte0 Desired setting of ALS value that turns the light on or off.
- * cbArg3, byte2 Desired keyboard light level.
- */
-
-
-enum kbd_timeout_unit {
- KBD_TIMEOUT_SECONDS = 0,
- KBD_TIMEOUT_MINUTES,
- KBD_TIMEOUT_HOURS,
- KBD_TIMEOUT_DAYS,
-};
-
-enum kbd_mode_bit {
- KBD_MODE_BIT_OFF = 0,
- KBD_MODE_BIT_ON,
- KBD_MODE_BIT_ALS,
- KBD_MODE_BIT_TRIGGER_ALS,
- KBD_MODE_BIT_TRIGGER,
- KBD_MODE_BIT_TRIGGER_25,
- KBD_MODE_BIT_TRIGGER_50,
- KBD_MODE_BIT_TRIGGER_75,
- KBD_MODE_BIT_TRIGGER_100,
-};
-
-#define kbd_is_als_mode_bit(bit) \
- ((bit) == KBD_MODE_BIT_ALS || (bit) == KBD_MODE_BIT_TRIGGER_ALS)
-#define kbd_is_trigger_mode_bit(bit) \
- ((bit) >= KBD_MODE_BIT_TRIGGER_ALS && (bit) <= KBD_MODE_BIT_TRIGGER_100)
-#define kbd_is_level_mode_bit(bit) \
- ((bit) >= KBD_MODE_BIT_TRIGGER_25 && (bit) <= KBD_MODE_BIT_TRIGGER_100)
-
-struct kbd_info {
- u16 modes;
- u8 type;
- u8 triggers;
- u8 levels;
- u8 seconds;
- u8 minutes;
- u8 hours;
- u8 days;
-};
-
-struct kbd_state {
- u8 mode_bit;
- u8 triggers;
- u8 timeout_value;
- u8 timeout_unit;
- u8 als_setting;
- u8 als_value;
- u8 level;
-};
-
-static const int kbd_tokens[] = {
- KBD_LED_OFF_TOKEN,
- KBD_LED_AUTO_25_TOKEN,
- KBD_LED_AUTO_50_TOKEN,
- KBD_LED_AUTO_75_TOKEN,
- KBD_LED_AUTO_100_TOKEN,
- KBD_LED_ON_TOKEN,
-};
-
-static u16 kbd_token_bits;
-
-static struct kbd_info kbd_info;
-static bool kbd_als_supported;
-static bool kbd_triggers_supported;
-
-static u8 kbd_mode_levels[16];
-static int kbd_mode_levels_count;
-
-static u8 kbd_previous_level;
-static u8 kbd_previous_mode_bit;
-
-static bool kbd_led_present;
-
-/*
- * NOTE: there are three ways to set the keyboard backlight level.
- * First, via kbd_state.mode_bit (assigning KBD_MODE_BIT_TRIGGER_* value).
- * Second, via kbd_state.level (assigning numerical value <= kbd_info.levels).
- * Third, via SMBIOS tokens (KBD_LED_* in kbd_tokens)
- *
- * There are laptops which support only one of these methods. If we want to
- * support as many machines as possible we need to implement all three methods.
- * The first two methods use the kbd_state structure. The third uses SMBIOS
- * tokens. If kbd_info.levels == 0, the machine does not support setting the
- * keyboard backlight level via kbd_state.level.
- */
-
-static int kbd_get_info(struct kbd_info *info)
-{
- u8 units;
- int ret;
-
- get_buffer();
-
- buffer->input[0] = 0x0;
- dell_send_request(buffer, 4, 11);
- ret = buffer->output[0];
-
- if (ret) {
- ret = dell_smi_error(ret);
- goto out;
- }
-
- info->modes = buffer->output[1] & 0xFFFF;
- info->type = (buffer->output[1] >> 24) & 0xFF;
- info->triggers = buffer->output[2] & 0xFF;
- units = (buffer->output[2] >> 8) & 0xFF;
- info->levels = (buffer->output[2] >> 16) & 0xFF;
-
- if (units & BIT(0))
- info->seconds = (buffer->output[3] >> 0) & 0xFF;
- if (units & BIT(1))
- info->minutes = (buffer->output[3] >> 8) & 0xFF;
- if (units & BIT(2))
- info->hours = (buffer->output[3] >> 16) & 0xFF;
- if (units & BIT(3))
- info->days = (buffer->output[3] >> 24) & 0xFF;
-
- out:
- release_buffer();
- return ret;
-}
-
-static unsigned int kbd_get_max_level(void)
-{
- if (kbd_info.levels != 0)
- return kbd_info.levels;
- if (kbd_mode_levels_count > 0)
- return kbd_mode_levels_count - 1;
- return 0;
-}
-
-static int kbd_get_level(struct kbd_state *state)
-{
- int i;
-
- if (kbd_info.levels != 0)
- return state->level;
-
- if (kbd_mode_levels_count > 0) {
- for (i = 0; i < kbd_mode_levels_count; ++i)
- if (kbd_mode_levels[i] == state->mode_bit)
- return i;
- return 0;
- }
-
- return -EINVAL;
-}
-
-static int kbd_set_level(struct kbd_state *state, u8 level)
-{
- if (kbd_info.levels != 0) {
- if (level != 0)
- kbd_previous_level = level;
- if (state->level == level)
- return 0;
- state->level = level;
- if (level != 0 && state->mode_bit == KBD_MODE_BIT_OFF)
- state->mode_bit = kbd_previous_mode_bit;
- else if (level == 0 && state->mode_bit != KBD_MODE_BIT_OFF) {
- kbd_previous_mode_bit = state->mode_bit;
- state->mode_bit = KBD_MODE_BIT_OFF;
- }
- return 0;
- }
-
- if (kbd_mode_levels_count > 0 && level < kbd_mode_levels_count) {
- if (level != 0)
- kbd_previous_level = level;
- state->mode_bit = kbd_mode_levels[level];
- return 0;
- }
-
- return -EINVAL;
-}
-
-static int kbd_get_state(struct kbd_state *state)
-{
- int ret;
-
- get_buffer();
-
- buffer->input[0] = 0x1;
- dell_send_request(buffer, 4, 11);
- ret = buffer->output[0];
-
- if (ret) {
- ret = dell_smi_error(ret);
- goto out;
- }
-
- state->mode_bit = ffs(buffer->output[1] & 0xFFFF);
- if (state->mode_bit != 0)
- state->mode_bit--;
-
- state->triggers = (buffer->output[1] >> 16) & 0xFF;
- state->timeout_value = (buffer->output[1] >> 24) & 0x3F;
- state->timeout_unit = (buffer->output[1] >> 30) & 0x3;
- state->als_setting = buffer->output[2] & 0xFF;
- state->als_value = (buffer->output[2] >> 8) & 0xFF;
- state->level = (buffer->output[2] >> 16) & 0xFF;
-
- out:
- release_buffer();
- return ret;
-}
-
-static int kbd_set_state(struct kbd_state *state)
-{
- int ret;
-
- get_buffer();
- buffer->input[0] = 0x2;
- buffer->input[1] = BIT(state->mode_bit) & 0xFFFF;
- buffer->input[1] |= (state->triggers & 0xFF) << 16;
- buffer->input[1] |= (state->timeout_value & 0x3F) << 24;
- buffer->input[1] |= (state->timeout_unit & 0x3) << 30;
- buffer->input[2] = state->als_setting & 0xFF;
- buffer->input[2] |= (state->level & 0xFF) << 16;
- dell_send_request(buffer, 4, 11);
- ret = buffer->output[0];
- release_buffer();
-
- return dell_smi_error(ret);
-}
-
-static int kbd_set_state_safe(struct kbd_state *state, struct kbd_state *old)
-{
- int ret;
-
- ret = kbd_set_state(state);
- if (ret == 0)
- return 0;
-
- /*
- * When setting the new state fails,try to restore the previous one.
- * This is needed on some machines where BIOS sets a default state when
- * setting a new state fails. This default state could be all off.
- */
-
- if (kbd_set_state(old))
- pr_err("Setting old previous keyboard state failed\n");
-
- return ret;
-}
-
-static int kbd_set_token_bit(u8 bit)
-{
- int id;
- int ret;
-
- if (bit >= ARRAY_SIZE(kbd_tokens))
- return -EINVAL;
-
- id = find_token_id(kbd_tokens[bit]);
- if (id == -1)
- return -EINVAL;
-
- get_buffer();
- buffer->input[0] = da_tokens[id].location;
- buffer->input[1] = da_tokens[id].value;
- dell_send_request(buffer, 1, 0);
- ret = buffer->output[0];
- release_buffer();
-
- return dell_smi_error(ret);
-}
-
-static int kbd_get_token_bit(u8 bit)
-{
- int id;
- int ret;
- int val;
-
- if (bit >= ARRAY_SIZE(kbd_tokens))
- return -EINVAL;
-
- id = find_token_id(kbd_tokens[bit]);
- if (id == -1)
- return -EINVAL;
-
- get_buffer();
- buffer->input[0] = da_tokens[id].location;
- dell_send_request(buffer, 0, 0);
- ret = buffer->output[0];
- val = buffer->output[1];
- release_buffer();
-
- if (ret)
- return dell_smi_error(ret);
-
- return (val == da_tokens[id].value);
-}
-
-static int kbd_get_first_active_token_bit(void)
-{
- int i;
- int ret;
-
- for (i = 0; i < ARRAY_SIZE(kbd_tokens); ++i) {
- ret = kbd_get_token_bit(i);
- if (ret == 1)
- return i;
- }
-
- return ret;
-}
-
-static int kbd_get_valid_token_counts(void)
-{
- return hweight16(kbd_token_bits);
-}
-
-static inline int kbd_init_info(void)
-{
- struct kbd_state state;
- int ret;
- int i;
-
- ret = kbd_get_info(&kbd_info);
- if (ret)
- return ret;
-
- kbd_get_state(&state);
-
- /* NOTE: timeout value is stored in 6 bits so max value is 63 */
- if (kbd_info.seconds > 63)
- kbd_info.seconds = 63;
- if (kbd_info.minutes > 63)
- kbd_info.minutes = 63;
- if (kbd_info.hours > 63)
- kbd_info.hours = 63;
- if (kbd_info.days > 63)
- kbd_info.days = 63;
-
- /* NOTE: On tested machines ON mode did not work and caused
- * problems (turned backlight off) so do not use it
- */
- kbd_info.modes &= ~BIT(KBD_MODE_BIT_ON);
-
- kbd_previous_level = kbd_get_level(&state);
- kbd_previous_mode_bit = state.mode_bit;
-
- if (kbd_previous_level == 0 && kbd_get_max_level() != 0)
- kbd_previous_level = 1;
-
- if (kbd_previous_mode_bit == KBD_MODE_BIT_OFF) {
- kbd_previous_mode_bit =
- ffs(kbd_info.modes & ~BIT(KBD_MODE_BIT_OFF));
- if (kbd_previous_mode_bit != 0)
- kbd_previous_mode_bit--;
- }
-
- if (kbd_info.modes & (BIT(KBD_MODE_BIT_ALS) |
- BIT(KBD_MODE_BIT_TRIGGER_ALS)))
- kbd_als_supported = true;
-
- if (kbd_info.modes & (
- BIT(KBD_MODE_BIT_TRIGGER_ALS) | BIT(KBD_MODE_BIT_TRIGGER) |
- BIT(KBD_MODE_BIT_TRIGGER_25) | BIT(KBD_MODE_BIT_TRIGGER_50) |
- BIT(KBD_MODE_BIT_TRIGGER_75) | BIT(KBD_MODE_BIT_TRIGGER_100)
- ))
- kbd_triggers_supported = true;
-
- /* kbd_mode_levels[0] is reserved, see below */
- for (i = 0; i < 16; ++i)
- if (kbd_is_level_mode_bit(i) && (BIT(i) & kbd_info.modes))
- kbd_mode_levels[1 + kbd_mode_levels_count++] = i;
-
- /*
- * Find the first supported mode and assign to kbd_mode_levels[0].
- * This should be 0 (off), but we cannot depend on the BIOS to
- * support 0.
- */
- if (kbd_mode_levels_count > 0) {
- for (i = 0; i < 16; ++i) {
- if (BIT(i) & kbd_info.modes) {
- kbd_mode_levels[0] = i;
- break;
- }
- }
- kbd_mode_levels_count++;
- }
-
- return 0;
-
-}
-
-static inline void kbd_init_tokens(void)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(kbd_tokens); ++i)
- if (find_token_id(kbd_tokens[i]) != -1)
- kbd_token_bits |= BIT(i);
-}
-
-static void kbd_init(void)
-{
- int ret;
-
- ret = kbd_init_info();
- kbd_init_tokens();
-
- if (kbd_token_bits != 0 || ret == 0)
- kbd_led_present = true;
-}
-
-static ssize_t kbd_led_timeout_store(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct kbd_state new_state;
- struct kbd_state state;
- bool convert;
- int value;
- int ret;
- char ch;
- u8 unit;
- int i;
-
- ret = sscanf(buf, "%d %c", &value, &ch);
- if (ret < 1)
- return -EINVAL;
- else if (ret == 1)
- ch = 's';
-
- if (value < 0)
- return -EINVAL;
-
- convert = false;
-
- switch (ch) {
- case 's':
- if (value > kbd_info.seconds)
- convert = true;
- unit = KBD_TIMEOUT_SECONDS;
- break;
- case 'm':
- if (value > kbd_info.minutes)
- convert = true;
- unit = KBD_TIMEOUT_MINUTES;
- break;
- case 'h':
- if (value > kbd_info.hours)
- convert = true;
- unit = KBD_TIMEOUT_HOURS;
- break;
- case 'd':
- if (value > kbd_info.days)
- convert = true;
- unit = KBD_TIMEOUT_DAYS;
- break;
- default:
- return -EINVAL;
- }
-
- if (quirks && quirks->needs_kbd_timeouts)
- convert = true;
-
- if (convert) {
- /* Convert value from current units to seconds */
- switch (unit) {
- case KBD_TIMEOUT_DAYS:
- value *= 24;
- case KBD_TIMEOUT_HOURS:
- value *= 60;
- case KBD_TIMEOUT_MINUTES:
- value *= 60;
- unit = KBD_TIMEOUT_SECONDS;
- }
-
- if (quirks && quirks->needs_kbd_timeouts) {
- for (i = 0; quirks->kbd_timeouts[i] != -1; i++) {
- if (value <= quirks->kbd_timeouts[i]) {
- value = quirks->kbd_timeouts[i];
- break;
- }
- }
- }
-
- if (value <= kbd_info.seconds && kbd_info.seconds) {
- unit = KBD_TIMEOUT_SECONDS;
- } else if (value / 60 <= kbd_info.minutes && kbd_info.minutes) {
- value /= 60;
- unit = KBD_TIMEOUT_MINUTES;
- } else if (value / (60 * 60) <= kbd_info.hours && kbd_info.hours) {
- value /= (60 * 60);
- unit = KBD_TIMEOUT_HOURS;
- } else if (value / (60 * 60 * 24) <= kbd_info.days && kbd_info.days) {
- value /= (60 * 60 * 24);
- unit = KBD_TIMEOUT_DAYS;
- } else {
- return -EINVAL;
- }
- }
-
- ret = kbd_get_state(&state);
- if (ret)
- return ret;
-
- new_state = state;
- new_state.timeout_value = value;
- new_state.timeout_unit = unit;
-
- ret = kbd_set_state_safe(&new_state, &state);
- if (ret)
- return ret;
-
- return count;
-}
-
-static ssize_t kbd_led_timeout_show(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct kbd_state state;
- int ret;
- int len;
-
- ret = kbd_get_state(&state);
- if (ret)
- return ret;
-
- len = sprintf(buf, "%d", state.timeout_value);
-
- switch (state.timeout_unit) {
- case KBD_TIMEOUT_SECONDS:
- return len + sprintf(buf+len, "s\n");
- case KBD_TIMEOUT_MINUTES:
- return len + sprintf(buf+len, "m\n");
- case KBD_TIMEOUT_HOURS:
- return len + sprintf(buf+len, "h\n");
- case KBD_TIMEOUT_DAYS:
- return len + sprintf(buf+len, "d\n");
- default:
- return -EINVAL;
- }
-
- return len;
-}
-
-static DEVICE_ATTR(stop_timeout, S_IRUGO | S_IWUSR,
- kbd_led_timeout_show, kbd_led_timeout_store);
-
-static const char * const kbd_led_triggers[] = {
- "keyboard",
- "touchpad",
- /*"trackstick"*/ NULL, /* NOTE: trackstick is just alias for touchpad */
- "mouse",
-};
-
-static ssize_t kbd_led_triggers_store(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct kbd_state new_state;
- struct kbd_state state;
- bool triggers_enabled = false;
- bool als_enabled = false;
- bool disable_als = false;
- bool enable_als = false;
- int trigger_bit = -1;
- char trigger[21];
- int i, ret;
-
- ret = sscanf(buf, "%20s", trigger);
- if (ret != 1)
- return -EINVAL;
-
- if (trigger[0] != '+' && trigger[0] != '-')
- return -EINVAL;
-
- ret = kbd_get_state(&state);
- if (ret)
- return ret;
-
- if (kbd_als_supported)
- als_enabled = kbd_is_als_mode_bit(state.mode_bit);
-
- if (kbd_triggers_supported)
- triggers_enabled = kbd_is_trigger_mode_bit(state.mode_bit);
-
- if (kbd_als_supported) {
- if (strcmp(trigger, "+als") == 0) {
- if (als_enabled)
- return count;
- enable_als = true;
- } else if (strcmp(trigger, "-als") == 0) {
- if (!als_enabled)
- return count;
- disable_als = true;
- }
- }
-
- if (enable_als || disable_als) {
- new_state = state;
- if (enable_als) {
- if (triggers_enabled)
- new_state.mode_bit = KBD_MODE_BIT_TRIGGER_ALS;
- else
- new_state.mode_bit = KBD_MODE_BIT_ALS;
- } else {
- if (triggers_enabled) {
- new_state.mode_bit = KBD_MODE_BIT_TRIGGER;
- kbd_set_level(&new_state, kbd_previous_level);
- } else {
- new_state.mode_bit = KBD_MODE_BIT_ON;
- }
- }
- if (!(kbd_info.modes & BIT(new_state.mode_bit)))
- return -EINVAL;
- ret = kbd_set_state_safe(&new_state, &state);
- if (ret)
- return ret;
- kbd_previous_mode_bit = new_state.mode_bit;
- return count;
- }
-
- if (kbd_triggers_supported) {
- for (i = 0; i < ARRAY_SIZE(kbd_led_triggers); ++i) {
- if (!(kbd_info.triggers & BIT(i)))
- continue;
- if (!kbd_led_triggers[i])
- continue;
- if (strcmp(trigger+1, kbd_led_triggers[i]) != 0)
- continue;
- if (trigger[0] == '+' &&
- triggers_enabled && (state.triggers & BIT(i)))
- return count;
- if (trigger[0] == '-' &&
- (!triggers_enabled || !(state.triggers & BIT(i))))
- return count;
- trigger_bit = i;
- break;
- }
- }
-
- if (trigger_bit != -1) {
- new_state = state;
- if (trigger[0] == '+')
- new_state.triggers |= BIT(trigger_bit);
- else {
- new_state.triggers &= ~BIT(trigger_bit);
- /* NOTE: trackstick bit (2) must be disabled when
- * disabling touchpad bit (1), otherwise touchpad
- * bit (1) will not be disabled */
- if (trigger_bit == 1)
- new_state.triggers &= ~BIT(2);
- }
- if ((kbd_info.triggers & new_state.triggers) !=
- new_state.triggers)
- return -EINVAL;
- if (new_state.triggers && !triggers_enabled) {
- if (als_enabled)
- new_state.mode_bit = KBD_MODE_BIT_TRIGGER_ALS;
- else {
- new_state.mode_bit = KBD_MODE_BIT_TRIGGER;
- kbd_set_level(&new_state, kbd_previous_level);
- }
- } else if (new_state.triggers == 0) {
- if (als_enabled)
- new_state.mode_bit = KBD_MODE_BIT_ALS;
- else
- kbd_set_level(&new_state, 0);
- }
- if (!(kbd_info.modes & BIT(new_state.mode_bit)))
- return -EINVAL;
- ret = kbd_set_state_safe(&new_state, &state);
- if (ret)
- return ret;
- if (new_state.mode_bit != KBD_MODE_BIT_OFF)
- kbd_previous_mode_bit = new_state.mode_bit;
- return count;
- }
-
- return -EINVAL;
-}
-
-static ssize_t kbd_led_triggers_show(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct kbd_state state;
- bool triggers_enabled;
- int level, i, ret;
- int len = 0;
-
- ret = kbd_get_state(&state);
- if (ret)
- return ret;
-
- len = 0;
-
- if (kbd_triggers_supported) {
- triggers_enabled = kbd_is_trigger_mode_bit(state.mode_bit);
- level = kbd_get_level(&state);
- for (i = 0; i < ARRAY_SIZE(kbd_led_triggers); ++i) {
- if (!(kbd_info.triggers & BIT(i)))
- continue;
- if (!kbd_led_triggers[i])
- continue;
- if ((triggers_enabled || level <= 0) &&
- (state.triggers & BIT(i)))
- buf[len++] = '+';
- else
- buf[len++] = '-';
- len += sprintf(buf+len, "%s ", kbd_led_triggers[i]);
- }
- }
-
- if (kbd_als_supported) {
- if (kbd_is_als_mode_bit(state.mode_bit))
- len += sprintf(buf+len, "+als ");
- else
- len += sprintf(buf+len, "-als ");
- }
-
- if (len)
- buf[len - 1] = '\n';
-
- return len;
-}
-
-static DEVICE_ATTR(start_triggers, S_IRUGO | S_IWUSR,
- kbd_led_triggers_show, kbd_led_triggers_store);
-
-static ssize_t kbd_led_als_store(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct kbd_state state;
- struct kbd_state new_state;
- u8 setting;
- int ret;
-
- ret = kstrtou8(buf, 10, &setting);
- if (ret)
- return ret;
-
- ret = kbd_get_state(&state);
- if (ret)
- return ret;
-
- new_state = state;
- new_state.als_setting = setting;
-
- ret = kbd_set_state_safe(&new_state, &state);
- if (ret)
- return ret;
-
- return count;
-}
-
-static ssize_t kbd_led_als_show(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct kbd_state state;
- int ret;
-
- ret = kbd_get_state(&state);
- if (ret)
- return ret;
-
- return sprintf(buf, "%d\n", state.als_setting);
-}
-
-static DEVICE_ATTR(als_setting, S_IRUGO | S_IWUSR,
- kbd_led_als_show, kbd_led_als_store);
-
-static struct attribute *kbd_led_attrs[] = {
- &dev_attr_stop_timeout.attr,
- &dev_attr_start_triggers.attr,
- &dev_attr_als_setting.attr,
- NULL,
-};
-ATTRIBUTE_GROUPS(kbd_led);
-
-static enum led_brightness kbd_led_level_get(struct led_classdev *led_cdev)
-{
- int ret;
- u16 num;
- struct kbd_state state;
-
- if (kbd_get_max_level()) {
- ret = kbd_get_state(&state);
- if (ret)
- return 0;
- ret = kbd_get_level(&state);
- if (ret < 0)
- return 0;
- return ret;
- }
-
- if (kbd_get_valid_token_counts()) {
- ret = kbd_get_first_active_token_bit();
- if (ret < 0)
- return 0;
- for (num = kbd_token_bits; num != 0 && ret > 0; --ret)
- num &= num - 1; /* clear the first bit set */
- if (num == 0)
- return 0;
- return ffs(num) - 1;
- }
-
- pr_warn("Keyboard brightness level control not supported\n");
- return 0;
-}
-
-static void kbd_led_level_set(struct led_classdev *led_cdev,
- enum led_brightness value)
-{
- struct kbd_state state;
- struct kbd_state new_state;
- u16 num;
-
- if (kbd_get_max_level()) {
- if (kbd_get_state(&state))
- return;
- new_state = state;
- if (kbd_set_level(&new_state, value))
- return;
- kbd_set_state_safe(&new_state, &state);
- return;
- }
-
- if (kbd_get_valid_token_counts()) {
- for (num = kbd_token_bits; num != 0 && value > 0; --value)
- num &= num - 1; /* clear the first bit set */
- if (num == 0)
- return;
- kbd_set_token_bit(ffs(num) - 1);
- return;
- }
-
- pr_warn("Keyboard brightness level control not supported\n");
-}
-
-static struct led_classdev kbd_led = {
- .name = "dell::kbd_backlight",
- .brightness_set = kbd_led_level_set,
- .brightness_get = kbd_led_level_get,
- .groups = kbd_led_groups,
-};
-
-static int __init kbd_led_init(struct device *dev)
-{
- kbd_init();
- if (!kbd_led_present)
- return -ENODEV;
- kbd_led.max_brightness = kbd_get_max_level();
- if (!kbd_led.max_brightness) {
- kbd_led.max_brightness = kbd_get_valid_token_counts();
- if (kbd_led.max_brightness)
- kbd_led.max_brightness--;
- }
- return led_classdev_register(dev, &kbd_led);
-}
-
-static void brightness_set_exit(struct led_classdev *led_cdev,
- enum led_brightness value)
-{
- /* Don't change backlight level on exit */
-};
-
-static void kbd_led_exit(void)
-{
- if (!kbd_led_present)
- return;
- kbd_led.brightness_set = brightness_set_exit;
- led_classdev_unregister(&kbd_led);
-}
-
static int __init dell_init(void)
{
int max_intensity = 0;
if (quirks && quirks->touchpad_led)
touchpad_led_init(&platform_device->dev);
- kbd_led_init(&platform_device->dev);
-
dell_laptop_dir = debugfs_create_dir("dell_laptop", NULL);
if (dell_laptop_dir != NULL)
debugfs_create_file("rfkill", 0444, dell_laptop_dir, NULL,
debugfs_remove_recursive(dell_laptop_dir);
if (quirks && quirks->touchpad_led)
touchpad_led_exit();
- kbd_led_exit();
i8042_remove_filter(dell_laptop_i8042_filter);
cancel_delayed_work_sync(&dell_rfkill_work);
backlight_device_unregister(dell_backlight_device);
module_exit(dell_exit);
MODULE_AUTHOR("Matthew Garrett <mjg@redhat.com>");
-MODULE_AUTHOR("Gabriele Mazzotta <gabriele.mzt@gmail.com>");
-MODULE_AUTHOR("Pali Rohár <pali.rohar@gmail.com>");
MODULE_DESCRIPTION("Dell laptop driver");
MODULE_LICENSE("GPL");
projects / GitHub / moto-9609 / android_kernel_motorola_exynos9610.git / commitdiff