imx: serial: add IrDA support to serial driver

Using the iMX serial driver with an IrDA device
needs extra peripheral settings and specific
timing depending on the transmitter circuitry used.

Signed-off-by: Fabian Godehardt <fg@emlix.com>
Signed-off-by: Oskar Schirmer <os@emlix.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

diff --git a/arch/arm/plat-mxc/include/mach/imx-uart.h b/arch/arm/plat-mxc/include/mach/imx-uart.h
index 599217b2e13f94cea800c55653e6497c9d2ff3ad..f9bd17dd8dd71af1fd6d6c05f7c7781b51daea26 100644 (file)
--- a/arch/arm/plat-mxc/include/mach/imx-uart.h
+++ b/arch/arm/plat-mxc/include/mach/imx-uart.h
@@ -20,11 +20,16 @@
 #define ASMARM_ARCH_UART_H
 
 #define IMXUART_HAVE_RTSCTS (1<<0)
+#define IMXUART_IRDA        (1<<1)
 
 struct imxuart_platform_data {
        int (*init)(struct platform_device *pdev);
        int (*exit)(struct platform_device *pdev);
        unsigned int flags;
+       void (*irda_enable)(int enable);
+       unsigned int irda_inv_rx:1;
+       unsigned int irda_inv_tx:1;
+       unsigned short transceiver_delay;
 };
 
 #endif

diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c
index 0de81f71f8848f95d11f72b0b43f6d23768861e5..8c79e8c2fd4e7d79569bec10f4d49b1559b484c2 100644 (file)
--- a/drivers/serial/imx.c
+++ b/drivers/serial/imx.c
@@ -8,6 +8,9 @@
  *  Author: Sascha Hauer <sascha@saschahauer.de>
  *  Copyright (C) 2004 Pengutronix
  *
+ *  Copyright (C) 2009 emlix GmbH
+ *  Author: Fabian Godehardt (added IrDA support for iMX)
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
@@ -41,6 +44,7 @@
 #include <linux/serial_core.h>
 #include <linux/serial.h>
 #include <linux/clk.h>
+#include <linux/delay.h>
 #include <linux/rational.h>
 
 #include <asm/io.h>
@@ -149,6 +153,7 @@
 #define  UCR4_DREN      (1<<0)  /* Recv data ready interrupt enable */
 #define  UFCR_RXTL_SHF   0       /* Receiver trigger level shift */
 #define  UFCR_RFDIV      (7<<7)  /* Reference freq divider mask */
+#define  UFCR_RFDIV_REG(x)     (((x) < 7 ? 6 - (x) : 6) << 7)
 #define  UFCR_TXTL_SHF   10      /* Transmitter trigger level shift */
 #define  USR1_PARITYERR  (1<<15) /* Parity error interrupt flag */
 #define  USR1_RTSS      (1<<14) /* RTS pin status */
@@ -213,9 +218,19 @@ struct imx_port {
        unsigned int            old_status;
        int                     txirq,rxirq,rtsirq;
        unsigned int            have_rtscts:1;
+       unsigned int            use_irda:1;
+       unsigned int            irda_inv_rx:1;
+       unsigned int            irda_inv_tx:1;
+       unsigned short          trcv_delay; /* transceiver delay */
        struct clk              *clk;
 };
 
+#ifdef CONFIG_IRDA
+#define USE_IRDA(sport)        ((sport)->use_irda)
+#else
+#define USE_IRDA(sport)        (0)
+#endif
+
 /*
  * Handle any change of modem status signal since we were last called.
  */
@@ -269,6 +284,48 @@ static void imx_stop_tx(struct uart_port *port)
        struct imx_port *sport = (struct imx_port *)port;
        unsigned long temp;
 
+       if (USE_IRDA(sport)) {
+               /* half duplex - wait for end of transmission */
+               int n = 256;
+               while ((--n > 0) &&
+                     !(readl(sport->port.membase + USR2) & USR2_TXDC)) {
+                       udelay(5);
+                       barrier();
+               }
+               /*
+                * irda transceiver - wait a bit more to avoid
+                * cutoff, hardware dependent
+                */
+               udelay(sport->trcv_delay);
+
+               /*
+                * half duplex - reactivate receive mode,
+                * flush receive pipe echo crap
+                */
+               if (readl(sport->port.membase + USR2) & USR2_TXDC) {
+                       temp = readl(sport->port.membase + UCR1);
+                       temp &= ~(UCR1_TXMPTYEN | UCR1_TRDYEN);
+                       writel(temp, sport->port.membase + UCR1);
+
+                       temp = readl(sport->port.membase + UCR4);
+                       temp &= ~(UCR4_TCEN);
+                       writel(temp, sport->port.membase + UCR4);
+
+                       while (readl(sport->port.membase + URXD0) &
+                              URXD_CHARRDY)
+                               barrier();
+
+                       temp = readl(sport->port.membase + UCR1);
+                       temp |= UCR1_RRDYEN;
+                       writel(temp, sport->port.membase + UCR1);
+
+                       temp = readl(sport->port.membase + UCR4);
+                       temp |= UCR4_DREN;
+                       writel(temp, sport->port.membase + UCR4);
+               }
+               return;
+       }
+
        temp = readl(sport->port.membase + UCR1);
        writel(temp & ~UCR1_TXMPTYEN, sport->port.membase + UCR1);
 }
@@ -324,9 +381,30 @@ static void imx_start_tx(struct uart_port *port)
        struct imx_port *sport = (struct imx_port *)port;
        unsigned long temp;
 
+       if (USE_IRDA(sport)) {
+               /* half duplex in IrDA mode; have to disable receive mode */
+               temp = readl(sport->port.membase + UCR4);
+               temp &= ~(UCR4_DREN);
+               writel(temp, sport->port.membase + UCR4);
+
+               temp = readl(sport->port.membase + UCR1);
+               temp &= ~(UCR1_RRDYEN);
+               writel(temp, sport->port.membase + UCR1);
+       }
+
        temp = readl(sport->port.membase + UCR1);
        writel(temp | UCR1_TXMPTYEN, sport->port.membase + UCR1);
 
+       if (USE_IRDA(sport)) {
+               temp = readl(sport->port.membase + UCR1);
+               temp |= UCR1_TRDYEN;
+               writel(temp, sport->port.membase + UCR1);
+
+               temp = readl(sport->port.membase + UCR4);
+               temp |= UCR4_TCEN;
+               writel(temp, sport->port.membase + UCR4);
+       }
+
        if (readl(sport->port.membase + UTS) & UTS_TXEMPTY)
                imx_transmit_buffer(sport);
 }
@@ -536,12 +614,7 @@ static int imx_setup_ufcr(struct imx_port *sport, unsigned int mode)
        if(!ufcr_rfdiv)
                ufcr_rfdiv = 1;
 
-       if(ufcr_rfdiv >= 7)
-               ufcr_rfdiv = 6;
-       else
-               ufcr_rfdiv = 6 - ufcr_rfdiv;
-
-       val |= UFCR_RFDIV & (ufcr_rfdiv << 7);
+       val |= UFCR_RFDIV_REG(ufcr_rfdiv);
 
        writel(val, sport->port.membase + UFCR);
 
@@ -560,8 +633,24 @@ static int imx_startup(struct uart_port *port)
         * requesting IRQs
         */
        temp = readl(sport->port.membase + UCR4);
+
+       if (USE_IRDA(sport))
+               temp |= UCR4_IRSC;
+
        writel(temp & ~UCR4_DREN, sport->port.membase + UCR4);
 
+       if (USE_IRDA(sport)) {
+               /* reset fifo's and state machines */
+               int i = 100;
+               temp = readl(sport->port.membase + UCR2);
+               temp &= ~UCR2_SRST;
+               writel(temp, sport->port.membase + UCR2);
+               while (!(readl(sport->port.membase + UCR2) & UCR2_SRST) &&
+                   (--i > 0)) {
+                       udelay(1);
+               }
+       }
+
        /*
         * Allocate the IRQ(s) i.MX1 has three interrupts whereas later
         * chips only have one interrupt.
@@ -577,12 +666,16 @@ static int imx_startup(struct uart_port *port)
                if (retval)
                        goto error_out2;
 
-               retval = request_irq(sport->rtsirq, imx_rtsint,
-                            (sport->rtsirq < MAX_INTERNAL_IRQ) ? 0 :
-                              IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
-                               DRIVER_NAME, sport);
-               if (retval)
-                       goto error_out3;
+               /* do not use RTS IRQ on IrDA */
+               if (!USE_IRDA(sport)) {
+                       retval = request_irq(sport->rtsirq, imx_rtsint,
+                                    (sport->rtsirq < MAX_INTERNAL_IRQ) ? 0 :
+                                      IRQF_TRIGGER_FALLING |
+                                      IRQF_TRIGGER_RISING,
+                                       DRIVER_NAME, sport);
+                       if (retval)
+                               goto error_out3;
+               }
        } else {
                retval = request_irq(sport->port.irq, imx_int, 0,
                                DRIVER_NAME, sport);
@@ -599,18 +692,49 @@ static int imx_startup(struct uart_port *port)
 
        temp = readl(sport->port.membase + UCR1);
        temp |= UCR1_RRDYEN | UCR1_RTSDEN | UCR1_UARTEN;
+
+       if (USE_IRDA(sport)) {
+               temp |= UCR1_IREN;
+               temp &= ~(UCR1_RTSDEN);
+       }
+
        writel(temp, sport->port.membase + UCR1);
 
        temp = readl(sport->port.membase + UCR2);
        temp |= (UCR2_RXEN | UCR2_TXEN);
        writel(temp, sport->port.membase + UCR2);
 
+       if (USE_IRDA(sport)) {
+               /* clear RX-FIFO */
+               int i = 64;
+               while ((--i > 0) &&
+                       (readl(sport->port.membase + URXD0) & URXD_CHARRDY)) {
+                       barrier();
+               }
+       }
+
 #if defined CONFIG_ARCH_MX2 || defined CONFIG_ARCH_MX3
        temp = readl(sport->port.membase + UCR3);
        temp |= UCR3_RXDMUXSEL;
        writel(temp, sport->port.membase + UCR3);
 #endif
 
+       if (USE_IRDA(sport)) {
+               temp = readl(sport->port.membase + UCR4);
+               if (sport->irda_inv_rx)
+                       temp |= UCR4_INVR;
+               else
+                       temp &= ~(UCR4_INVR);
+               writel(temp | UCR4_DREN, sport->port.membase + UCR4);
+
+               temp = readl(sport->port.membase + UCR3);
+               if (sport->irda_inv_tx)
+                       temp |= UCR3_INVT;
+               else
+                       temp &= ~(UCR3_INVT);
+               writel(temp, sport->port.membase + UCR3);
+       }
+
        /*
         * Enable modem status interrupts
         */
@@ -618,6 +742,16 @@ static int imx_startup(struct uart_port *port)
        imx_enable_ms(&sport->port);
        spin_unlock_irqrestore(&sport->port.lock,flags);
 
+       if (USE_IRDA(sport)) {
+               struct imxuart_platform_data *pdata;
+               pdata = sport->port.dev->platform_data;
+               sport->irda_inv_rx = pdata->irda_inv_rx;
+               sport->irda_inv_tx = pdata->irda_inv_tx;
+               sport->trcv_delay = pdata->transceiver_delay;
+               if (pdata->irda_enable)
+                       pdata->irda_enable(1);
+       }
+
        return 0;
 
 error_out3:
@@ -639,6 +773,13 @@ static void imx_shutdown(struct uart_port *port)
        temp &= ~(UCR2_TXEN);
        writel(temp, sport->port.membase + UCR2);
 
+       if (USE_IRDA(sport)) {
+               struct imxuart_platform_data *pdata;
+               pdata = sport->port.dev->platform_data;
+               if (pdata->irda_enable)
+                       pdata->irda_enable(0);
+       }
+
        /*
         * Stop our timer.
         */
@@ -648,7 +789,8 @@ static void imx_shutdown(struct uart_port *port)
         * Free the interrupts
         */
        if (sport->txirq > 0) {
-               free_irq(sport->rtsirq, sport);
+               if (!USE_IRDA(sport))
+                       free_irq(sport->rtsirq, sport);
                free_irq(sport->txirq, sport);
                free_irq(sport->rxirq, sport);
        } else
@@ -660,6 +802,9 @@ static void imx_shutdown(struct uart_port *port)
 
        temp = readl(sport->port.membase + UCR1);
        temp &= ~(UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_RTSDEN | UCR1_UARTEN);
+       if (USE_IRDA(sport))
+               temp &= ~(UCR1_IREN);
+
        writel(temp, sport->port.membase + UCR1);
 }
 
@@ -768,11 +913,19 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios,
                        sport->port.membase + UCR2);
        old_txrxen &= (UCR2_TXEN | UCR2_RXEN);
 
-       div = sport->port.uartclk / (baud * 16);
-       if (div > 7)
-               div = 7;
-       if (!div)
+       if (USE_IRDA(sport)) {
+               /*
+                * use maximum available submodule frequency to
+                * avoid missing short pulses due to low sampling rate
+                */
                div = 1;
+       } else {
+               div = sport->port.uartclk / (baud * 16);
+               if (div > 7)
+                       div = 7;
+               if (!div)
+                       div = 1;
+       }
 
        rational_best_approximation(16 * div * baud, sport->port.uartclk,
                1 << 16, 1 << 16, &num, &denom);
@@ -781,8 +934,7 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios,
        denom -= 1;
 
        ufcr = readl(sport->port.membase + UFCR);
-       ufcr = (ufcr & (~UFCR_RFDIV)) |
-           (div << 7);
+       ufcr = (ufcr & (~UFCR_RFDIV)) | UFCR_RFDIV_REG(div);
        writel(ufcr, sport->port.membase + UFCR);
 
        writel(num, sport->port.membase + UBIR);
@@ -1141,6 +1293,11 @@ static int serial_imx_probe(struct platform_device *pdev)
        if (pdata && (pdata->flags & IMXUART_HAVE_RTSCTS))
                sport->have_rtscts = 1;
 
+#ifdef CONFIG_IRDA
+       if (pdata && (pdata->flags & IMXUART_IRDA))
+               sport->use_irda = 1;
+#endif
+
        if (pdata->init) {
                ret = pdata->init(pdev);
                if (ret)