[SCSI] Use pcibios_resource_to_bus()

We had our own code (pci_get_base_address()) to get the bus address of
a BAR.  We can get this using pcibios_resource_to_bus() instead.

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

diff --git a/drivers/scsi/sym53c8xx_2/sym_glue.c b/drivers/scsi/sym53c8xx_2/sym_glue.c
index ec9d93aa160d89a256aee7e92b17493205149fca..e6ff89a8524c74f93971715a762b8c64d18176e1 100644 (file)
--- a/drivers/scsi/sym53c8xx_2/sym_glue.c
+++ b/drivers/scsi/sym53c8xx_2/sym_glue.c
@@ -134,45 +134,6 @@ static void sym2_setup_params(void)
        }
 }
 
-/*
- * We used to try to deal with 64-bit BARs here, but don't any more.
- * There are many parts of this driver which would need to be modified
- * to handle a 64-bit base address, including scripts.  I'm uncomfortable
- * with making those changes when I have no way of testing it, so I'm
- * just going to disable it.
- *
- * Note that some machines (eg HP rx8620 and Superdome) have bus addresses
- * below 4GB and physical addresses above 4GB.  These will continue to work.
- */
-static int __devinit
-pci_get_base_address(struct pci_dev *pdev, int index, unsigned long *basep)
-{
-       u32 tmp;
-       unsigned long base;
-#define PCI_BAR_OFFSET(index) (PCI_BASE_ADDRESS_0 + (index<<2))
-
-       pci_read_config_dword(pdev, PCI_BAR_OFFSET(index++), &tmp);
-       base = tmp;
-       if ((tmp & 0x7) == PCI_BASE_ADDRESS_MEM_TYPE_64) {
-               pci_read_config_dword(pdev, PCI_BAR_OFFSET(index++), &tmp);
-               if (tmp > 0) {
-                       dev_err(&pdev->dev,
-                               "BAR %d is 64-bit, disabling\n", index - 1);
-                       base = 0;
-               }
-       }
-
-       if ((base & PCI_BASE_ADDRESS_SPACE) == PCI_BASE_ADDRESS_SPACE_IO) {
-               base &= PCI_BASE_ADDRESS_IO_MASK;
-       } else {
-               base &= PCI_BASE_ADDRESS_MEM_MASK;
-       }
-
-       *basep = base;
-       return index;
-#undef PCI_BAR_OFFSET
-}
-
 static struct scsi_transport_template *sym2_transport_template = NULL;
 
 /*
@@ -1866,13 +1827,23 @@ static int __devinit sym_set_workarounds(struct sym_device *device)
 static void __devinit
 sym_init_device(struct pci_dev *pdev, struct sym_device *device)
 {
-       int i;
+       int i = 2;
+       struct pci_bus_region bus_addr;
 
        device->host_id = SYM_SETUP_HOST_ID;
        device->pdev = pdev;
 
-       i = pci_get_base_address(pdev, 1, &device->mmio_base);
-       pci_get_base_address(pdev, i, &device->ram_base);
+       pcibios_resource_to_bus(pdev, &bus_addr, &pdev->resource[1]);
+       device->mmio_base = bus_addr.start;
+
+       /*
+        * If the BAR is 64-bit, resource 2 will be occupied by the
+        * upper 32 bits
+        */
+       if (!pdev->resource[i].flags)
+               i++;
+       pcibios_resource_to_bus(pdev, &bus_addr, &pdev->resource[i]);
+       device->ram_base = bus_addr.start;
 
 #ifdef CONFIG_SCSI_SYM53C8XX_MMIO
        if (device->mmio_base)