#define ERR(format, arg...) \
printk(KERN_ERR "%s:%s: " format "\n" , __FILE__, __func__ , ## arg)
-#define WARN(format, arg...) \
+#define WARNING(format, arg...) \
printk(KERN_WARNING "%s:%s: " format "\n" , __FILE__, __func__ , ## arg)
#define INFO(format, arg...) \
({ \
int status; \
if ((status = usb_submit_urb(urb, mem_flags)) < 0) { \
- WARN("usb_submit_urb failed,status=%d", status); \
+ WARNING("usb_submit_urb failed,status=%d", status); \
} \
status; \
})
DBG(4,"urb killed status %d", urb->status);
return; // Give up
default:
- WARN("urb status %d",urb->status);
+ WARNING("urb status %d",urb->status);
if (b_out->busy == 0) {
st5481_usb_pipe_reset(adapter, (bcs->channel+1)*2 | USB_DIR_OUT, NULL, NULL);
}
B_L1L2(bcs, PH_DEACTIVATE | INDICATION, NULL);
break;
default:
- WARN("pr %#x\n", pr);
+ WARNING("pr %#x\n", pr);
}
}
DBG(1,"urb killed status %d", urb->status);
break;
default:
- WARN("urb status %d",urb->status);
+ WARNING("urb status %d",urb->status);
if (d_out->busy == 0) {
st5481_usb_pipe_reset(adapter, EP_D_OUT | USB_DIR_OUT, fifo_reseted, adapter);
}
isdnhdlc_out_init(&d_out->hdlc_state, 1, 0);
if (test_and_set_bit(buf_nr, &d_out->busy)) {
- WARN("ep %d urb %d busy %#lx", EP_D_OUT, buf_nr, d_out->busy);
+ WARNING("ep %d urb %d busy %#lx", EP_D_OUT, buf_nr, d_out->busy);
return;
}
urb = d_out->urb[buf_nr];
FsmEvent(&adapter->d_out.fsm, EV_DOUT_START_XMIT, NULL);
break;
default:
- WARN("pr %#x\n", pr);
+ WARNING("pr %#x\n", pr);
break;
}
}
struct ctrl_msg *ctrl_msg;
if ((w_index = fifo_add(&ctrl->msg_fifo.f)) < 0) {
- WARN("control msg FIFO full");
+ WARNING("control msg FIFO full");
return;
}
ctrl_msg = &ctrl->msg_fifo.data[w_index];
DBG(1,"urb killed status %d", urb->status);
return; // Give up
default:
- WARN("urb status %d",urb->status);
+ WARNING("urb status %d",urb->status);
break;
}
}
DBG(2, "urb shutting down with status: %d", urb->status);
return;
default:
- WARN("nonzero urb status received: %d", urb->status);
+ WARNING("nonzero urb status received: %d", urb->status);
goto exit;
}
exit:
status = usb_submit_urb (urb, GFP_ATOMIC);
if (status)
- WARN("usb_submit_urb failed with result %d", status);
+ WARNING("usb_submit_urb failed with result %d", status);
}
/* ======================================================================
DBG(2,"");
if ((status = usb_reset_configuration (dev)) < 0) {
- WARN("reset_configuration failed,status=%d",status);
+ WARNING("reset_configuration failed,status=%d",status);
return status;
}
// Check if the config is sane
if ( altsetting->desc.bNumEndpoints != 7 ) {
- WARN("expecting 7 got %d endpoints!", altsetting->desc.bNumEndpoints);
+ WARNING("expecting 7 got %d endpoints!", altsetting->desc.bNumEndpoints);
return -EINVAL;
}
// Use alternative setting 3 on interface 0 to have 2B+D
if ((status = usb_set_interface (dev, 0, 3)) < 0) {
- WARN("usb_set_interface failed,status=%d",status);
+ WARNING("usb_set_interface failed,status=%d",status);
return status;
}
DBG(1,"urb killed status %d", urb->status);
return; // Give up
default:
- WARN("urb status %d",urb->status);
+ WARNING("urb status %d",urb->status);
break;
}
}
DBG(4,"count=%d",status);
DBG_PACKET(0x400, in->rcvbuf, status);
if (!(skb = dev_alloc_skb(status))) {
- WARN("receive out of memory\n");
+ WARNING("receive out of memory\n");
break;
}
memcpy(skb_put(skb, status), in->rcvbuf, status);
#endif
#define ERR(stuff...) pr_err("udc: " stuff)
-#define WARN(stuff...) pr_warning("udc: " stuff)
+#define WARNING(stuff...) pr_warning("udc: " stuff)
#define INFO(stuff...) pr_info("udc: " stuff)
#define DBG(stuff...) pr_debug("udc: " stuff)
* but if the controller isn't recognized at all then
* that assumption is a bit more likely to be wrong.
*/
- WARN(cdev, "controller '%s' not recognized; trying %s\n",
+ WARNING(cdev, "controller '%s' not recognized; trying %s\n",
gadget->name,
cdc_config_driver.label);
device_desc.bcdDevice =
* but if the controller isn't recognized at all then
* that assumption is a bit more likely to be wrong.
*/
- WARN(cdev, "controller '%s' not recognized; trying %s\n",
+ WARNING(cdev, "controller '%s' not recognized; trying %s\n",
gadget->name,
eth_config_driver.label);
device_desc.bcdDevice =
dev_vdbg(&(d)->gadget->dev , fmt , ## args)
#define ERROR(d, fmt, args...) \
dev_err(&(d)->gadget->dev , fmt , ## args)
-#define WARN(d, fmt, args...) \
+#define WARNING(d, fmt, args...) \
dev_warn(&(d)->gadget->dev , fmt , ## args)
#define INFO(d, fmt, args...) \
dev_info(&(d)->gadget->dev , fmt , ## args)
if (rc != 0 && rc != -ESHUTDOWN) {
/* We can't do much more than wait for a reset */
- WARN(fsg, "error in submission: %s --> %d\n",
+ WARNING(fsg, "error in submission: %s --> %d\n",
fsg->ep0->name, rc);
}
return rc;
/* Save the command for later */
if (fsg->cbbuf_cmnd_size)
- WARN(fsg, "CB[I] overwriting previous command\n");
+ WARNING(fsg, "CB[I] overwriting previous command\n");
fsg->cbbuf_cmnd_size = req->actual;
memcpy(fsg->cbbuf_cmnd, req->buf, fsg->cbbuf_cmnd_size);
* submissions if DMA is enabled. */
if (rc != -ESHUTDOWN && !(rc == -EOPNOTSUPP &&
req->length == 0))
- WARN(fsg, "error in submission: %s --> %d\n",
+ WARNING(fsg, "error in submission: %s --> %d\n",
ep->name, rc);
}
}
VDBG(fsg, "delayed bulk-in endpoint halt\n");
while (rc != 0) {
if (rc != -EAGAIN) {
- WARN(fsg, "usb_ep_set_halt -> %d\n", rc);
+ WARNING(fsg, "usb_ep_set_halt -> %d\n", rc);
rc = 0;
break;
}
VDBG(fsg, "delayed bulk-in endpoint wedge\n");
while (rc != 0) {
if (rc != -EAGAIN) {
- WARN(fsg, "usb_ep_set_wedge -> %d\n", rc);
+ WARNING(fsg, "usb_ep_set_wedge -> %d\n", rc);
rc = 0;
break;
}
if (gcnum >= 0)
mod_data.release = 0x0300 + gcnum;
else {
- WARN(fsg, "controller '%s' not recognized\n",
+ WARNING(fsg, "controller '%s' not recognized\n",
fsg->gadget->name);
mod_data.release = 0x0399;
}
/* If the ep is configured */
if (curr_ep->name == NULL) {
- WARN("Invalid EP?");
+ WARNING("Invalid EP?");
continue;
}
#endif
#define ERR(stuff...) pr_err("udc: " stuff)
-#define WARN(stuff...) pr_warning("udc: " stuff)
+#define WARNING(stuff...) pr_warning("udc: " stuff)
#define INFO(stuff...) pr_info("udc: " stuff)
/*-------------------------------------------------------------------------*/
dev_vdbg(&(d)->gadget->dev , fmt , ## args)
#define ERROR(d, fmt, args...) \
dev_err(&(d)->gadget->dev , fmt , ## args)
-#define WARN(d, fmt, args...) \
- dev_warn(&(d)->gadget->dev , fmt , ## args)
#define INFO(d, fmt, args...) \
dev_info(&(d)->gadget->dev , fmt , ## args)
* usb_gadget_driver_{register,unregister}() must change.
*/
if (the_controller) {
- WARN(dev, "ignoring %s\n", pci_name(pdev));
+ WARNING(dev, "ignoring %s\n", pci_name(pdev));
return -EBUSY;
}
if (!pdev->irq) {
#define ERROR(dev,fmt,args...) \
xprintk(dev , KERN_ERR , fmt , ## args)
-#define WARN(dev,fmt,args...) \
+#define WARNING(dev,fmt,args...) \
xprintk(dev , KERN_WARNING , fmt , ## args)
#define INFO(dev,fmt,args...) \
xprintk(dev , KERN_INFO , fmt , ## args)
#define ERROR(dev,fmt,args...) \
xprintk(dev , KERN_ERR , fmt , ## args)
-#define WARN(dev,fmt,args...) \
- xprintk(dev , KERN_WARNING , fmt , ## args)
#define INFO(dev,fmt,args...) \
xprintk(dev , KERN_INFO , fmt , ## args)
* 0122, and 0124; not all cases trigger the warning.
*/
if ((tmp & (1 << NAK_OUT_PACKETS)) == 0) {
- WARN (ep->dev, "%s lost packet sync!\n",
+ WARNING (ep->dev, "%s lost packet sync!\n",
ep->ep.name);
req->req.status = -EOVERFLOW;
} else if ((tmp = readl (&ep->regs->ep_avail)) != 0) {
#define ERROR(dev,fmt,args...) \
xprintk(dev , KERN_ERR , fmt , ## args)
-#define WARN(dev,fmt,args...) \
+#define WARNING(dev,fmt,args...) \
xprintk(dev , KERN_WARNING , fmt , ## args)
#define INFO(dev,fmt,args...) \
xprintk(dev , KERN_INFO , fmt , ## args)
status = -EINVAL;
else if (value) {
if (ep->udc->ep0_set_config) {
- WARN("error changing config?\n");
+ WARNING("error changing config?\n");
omap_writew(UDC_CLR_CFG, UDC_SYSCON2);
}
omap_writew(UDC_STALL_CMD, UDC_SYSCON2);
u.r.bRequestType, u.r.bRequest, status);
if (udc->ep0_set_config) {
if (udc->ep0_reset_config)
- WARN("error resetting config?\n");
+ WARNING("error resetting config?\n");
else
omap_writew(UDC_CLR_CFG, UDC_SYSCON2);
}
* which would prevent entry to deep sleep...
*/
if ((devstat & UDC_ATT) != 0 && (devstat & UDC_SUS) == 0) {
- WARN("session active; suspend requires disconnect\n");
+ WARNING("session active; suspend requires disconnect\n");
omap_pullup(&udc->gadget, 0);
}
#endif
#define ERR(stuff...) pr_err("udc: " stuff)
-#define WARN(stuff...) pr_warning("udc: " stuff)
+#define WARNING(stuff...) pr_warning("udc: " stuff)
#define INFO(stuff...) pr_info("udc: " stuff)
#define DBG(stuff...) pr_debug("udc: " stuff)
#define ERROR(dev, fmt, args...) \
xprintk(dev, KERN_ERR, fmt, ## args)
-#define WARN(dev, fmt, args...) \
+#define WARNING(dev, fmt, args...) \
xprintk(dev, KERN_WARNING, fmt, ## args)
#define INFO(dev, fmt, args...) \
xprintk(dev, KERN_INFO, fmt, ## args)
struct pxa25x_request *req;
req = container_of (_req, struct pxa25x_request, req);
- WARN_ON (!list_empty (&req->queue));
+ WARN_ON(!list_empty (&req->queue));
kfree(req);
}
* tell us about config change events,
* so later ones may fail...
*/
- WARN("config change %02x fail %d?\n",
+ WARNING("config change %02x fail %d?\n",
u.r.bRequest, i);
return;
/* TODO experiment: if has_cfr,
unsigned long flags;
if (!udc->mach->gpio_pullup && !udc->mach->udc_command)
- WARN("USB host won't detect disconnect!\n");
+ WARNING("USB host won't detect disconnect!\n");
udc->suspended = 1;
local_irq_save(flags);
#define DBG(lvl, stuff...) do{if ((lvl) <= UDC_DEBUG) DMSG(stuff);}while(0)
#define ERR(stuff...) pr_err("udc: " stuff)
-#define WARN(stuff...) pr_warning("udc: " stuff)
+#define WARNING(stuff...) pr_warning("udc: " stuff)
#define INFO(stuff...) pr_info("udc: " stuff)
#undef DBG
#undef VDBG
#undef ERROR
-#undef WARN
#undef INFO
#define xprintk(d, level, fmt, args...) \
#define ERROR(dev, fmt, args...) \
xprintk(dev , KERN_ERR , fmt , ## args)
-#define WARN(dev, fmt, args...) \
- xprintk(dev , KERN_WARNING , fmt , ## args)
#define INFO(dev, fmt, args...) \
xprintk(dev , KERN_INFO , fmt , ## args)
for (i = 0; i < 100 && !list_empty(&hep->urb_list); i++)
msleep(3);
if (!list_empty(&hep->urb_list))
- WARN("ep %p not empty?\n", ep);
+ WARNING("ep %p not empty?\n", ep);
kfree(ep);
hep->hcpriv = NULL;
#endif
#define ERR(stuff...) printk(KERN_ERR "116x: " stuff)
-#define WARN(stuff...) printk(KERN_WARNING "116x: " stuff)
+#define WARNING(stuff...) printk(KERN_WARNING "116x: " stuff)
#define INFO(stuff...) printk(KERN_INFO "116x: " stuff)
/* ------------------------------------------------- */
if (!list_empty(&hep->urb_list))
msleep(3);
if (!list_empty(&hep->urb_list))
- WARN("ep %p not empty?\n", ep);
+ WARNING("ep %p not empty?\n", ep);
kfree(ep);
hep->hcpriv = NULL;
#endif
#define ERR(stuff...) printk(KERN_ERR "sl811: " stuff)
-#define WARN(stuff...) printk(KERN_WARNING "sl811: " stuff)
+#define WARNING(stuff...) printk(KERN_WARNING "sl811: " stuff)
#define INFO(stuff...) printk(KERN_INFO "sl811: " stuff)
#define ERROR(tdev, fmt, args...) \
dev_err(&(tdev)->intf->dev , fmt , ## args)
-#define WARN(tdev, fmt, args...) \
+#define WARNING(tdev, fmt, args...) \
dev_warn(&(tdev)->intf->dev , fmt , ## args)
/*-------------------------------------------------------------------------*/
status = get_endpoints (dev, intf);
if (status < 0) {
- WARN(dev, "couldn't get endpoints, %d\n",
+ WARNING(dev, "couldn't get endpoints, %d\n",
status);
return status;
}
dev_vdbg(&(d)->gadget->dev , fmt , ## args)
#define ERROR(d, fmt, args...) \
dev_err(&(d)->gadget->dev , fmt , ## args)
-#define WARN(d, fmt, args...) \
+#define WARNING(d, fmt, args...) \
dev_warn(&(d)->gadget->dev , fmt , ## args)
#define INFO(d, fmt, args...) \
dev_info(&(d)->gadget->dev , fmt , ## args)