staging: comedi: ni_mio_common: fix lines over 80 characters

Fix the checkpatch.pl issues.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/staging/comedi/drivers/ni_mio_common.c b/drivers/staging/comedi/drivers/ni_mio_common.c
index dce8a864eef6ff5733bd7cb9b02418a3e2d8ee43..fa2aad4b3ec818930bf5e0c540a743d074c06efb 100644 (file)
--- a/drivers/staging/comedi/drivers/ni_mio_common.c
+++ b/drivers/staging/comedi/drivers/ni_mio_common.c
@@ -877,16 +877,17 @@ static inline unsigned short ni_ao_win_inw(struct comedi_device *dev, int addr)
        return data;
 }
 
-/* ni_set_bits( ) allows different parts of the ni_mio_common driver to
-* share registers (such as Interrupt_A_Register) without interfering with
-* each other.
-*
-* NOTE: the switch/case statements are optimized out for a constant argument
-* so this is actually quite fast---  If you must wrap another function around this
-* make it inline to avoid a large speed penalty.
-*
-* value should only be 1 or 0.
-*/
+/*
+ * ni_set_bits( ) allows different parts of the ni_mio_common driver to
+ * share registers (such as Interrupt_A_Register) without interfering with
+ * each other.
+ *
+ * NOTE: the switch/case statements are optimized out for a constant argument
+ * so this is actually quite fast---  If you must wrap another function around
+ * this make it inline to avoid a large speed penalty.
+ *
+ * value should only be 1 or 0.
+ */
 static inline void ni_set_bits(struct comedi_device *dev, int reg,
                               unsigned int bits, unsigned int value)
 {
@@ -1102,7 +1103,10 @@ static void ni_ai_fifo_read(struct comedi_device *dev,
                        comedi_buf_write_samples(s, &data, 1);
                }
        } else if (devpriv->is_6143) {
-               /*  This just reads the FIFO assuming the data is present, no checks on the FIFO status are performed */
+               /*
+                * This just reads the FIFO assuming the data is present,
+                * no checks on the FIFO status are performed.
+                */
                for (i = 0; i < n / 2; i++) {
                        dl = ni_readl(dev, NI6143_AI_FIFO_DATA_REG);
 
@@ -1153,7 +1157,6 @@ static void ni_handle_fifo_dregs(struct comedi_device *dev)
        struct comedi_subdevice *s = dev->read_subdev;
        unsigned int dl;
        unsigned short data;
-       unsigned short fifo_empty;
        int i;
 
        if (devpriv->is_611x) {
@@ -1189,15 +1192,16 @@ static void ni_handle_fifo_dregs(struct comedi_device *dev)
                }
 
        } else {
-               fifo_empty = ni_stc_readw(dev, NISTC_AI_STATUS1_REG) &
-                            NISTC_AI_STATUS1_FIFO_E;
-               while (fifo_empty == 0) {
+               unsigned short fe;      /* fifo empty */
+
+               fe = ni_stc_readw(dev, NISTC_AI_STATUS1_REG) &
+                    NISTC_AI_STATUS1_FIFO_E;
+               while (fe == 0) {
                        for (i = 0;
                             i < ARRAY_SIZE(devpriv->ai_fifo_buffer); i++) {
-                               fifo_empty = ni_stc_readw(dev,
-                                                         NISTC_AI_STATUS1_REG) &
-                                               NISTC_AI_STATUS1_FIFO_E;
-                               if (fifo_empty)
+                               fe = ni_stc_readw(dev, NISTC_AI_STATUS1_REG) &
+                                    NISTC_AI_STATUS1_FIFO_E;
+                               if (fe)
                                        break;
                                devpriv->ai_fifo_buffer[i] =
                                    ni_readw(dev, NI_E_AI_FIFO_DATA_REG);
@@ -1323,7 +1327,10 @@ static void handle_a_interrupt(struct comedi_device *dev, unsigned short status,
        struct comedi_subdevice *s = dev->read_subdev;
        struct comedi_cmd *cmd = &s->async->cmd;
 
-       /* 67xx boards don't have ai subdevice, but their gpct0 might generate an a interrupt */
+       /*
+        * 67xx boards don't have ai subdevice, but their gpct0 might
+        * generate an a interrupt.
+        */
        if (s->type == COMEDI_SUBD_UNUSED)
                return;
 
@@ -1826,7 +1833,8 @@ static void ni_load_channelgain_list(struct comedi_device *dev,
                        ni_writew(dev, devpriv->ai_calib_source,
                                  NI6143_CALIB_CHAN_REG);
                        devpriv->ai_calib_source_enabled = 1;
-                       msleep_interruptible(100);      /*  Allow relays to change */
+                       /* Allow relays to change */
+                       msleep_interruptible(100);
                } else if (!(list[0] & CR_ALT_SOURCE)
                           && devpriv->ai_calib_source_enabled) {
                        /*  Strobe Relay disable bit */
@@ -1836,7 +1844,8 @@ static void ni_load_channelgain_list(struct comedi_device *dev,
                        ni_writew(dev, devpriv->ai_calib_source,
                                  NI6143_CALIB_CHAN_REG);
                        devpriv->ai_calib_source_enabled = 0;
-                       msleep_interruptible(100);      /*  Allow relays to change */
+                       /* Allow relays to change */
+                       msleep_interruptible(100);
                }
        }
 
@@ -1957,7 +1966,11 @@ static int ni_ai_insn_read(struct comedi_device *dev,
                        ni_stc_writew(dev, NISTC_AI_CMD1_CONVERT_PULSE,
                                      NISTC_AI_CMD1_REG);
 
-                       /* The 6143 has 32-bit FIFOs. You need to strobe a bit to move a single 16bit stranded sample into the FIFO */
+                       /*
+                        * The 6143 has 32-bit FIFOs. You need to strobe a
+                        * bit to move a single 16bit stranded sample into
+                        * the FIFO.
+                        */
                        dl = 0;
                        for (i = 0; i < NI_TIMEOUT; i++) {
                                if (ni_readl(dev, NI6143_AI_FIFO_STATUS_REG) &
@@ -1995,7 +2008,8 @@ static int ni_ai_insn_read(struct comedi_device *dev,
                                data[n] = dl;
                        } else {
                                d = ni_readw(dev, NI_E_AI_FIFO_DATA_REG);
-                               d += signbits;  /* subtle: needs to be short addition */
+                               /* subtle: needs to be short addition */
+                               d += signbits;
                                data[n] = d;
                        }
                }
@@ -2331,7 +2345,10 @@ static int ni_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
                if (stop_count == 0) {
                        devpriv->ai_cmd2 |= NISTC_AI_CMD2_END_ON_EOS;
                        interrupt_a_enable |= NISTC_INTA_ENA_AI_STOP;
-                       /*  this is required to get the last sample for chanlist_len > 1, not sure why */
+                       /*
+                        * This is required to get the last sample for
+                        * chanlist_len > 1, not sure why.
+                        */
                        if (cmd->chanlist_len > 1)
                                start_stop_select |= NISTC_AI_STOP_POLARITY |
                                                     NISTC_AI_STOP_EDGE;
@@ -2451,7 +2468,7 @@ static int ni_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 
                switch (devpriv->aimode) {
                case AIMODE_HALF_FULL:
-                       /*generate FIFO interrupts and DMA requests on half-full */
+                       /* FIFO interrupts and DMA requests on half-full */
 #ifdef PCIDMA
                        ni_stc_writew(dev, NISTC_AI_MODE3_FIFO_MODE_HF_E,
                                      NISTC_AI_MODE3_REG);
@@ -4905,7 +4922,10 @@ static int ni_mseries_set_pll_master_clock(struct comedi_device *dev,
 
        if (source == NI_MIO_PLL_PXI10_CLOCK)
                period_ns = 100;
-       /*  these limits are somewhat arbitrary, but NI advertises 1 to 20MHz range so we'll use that */
+       /*
+        * These limits are somewhat arbitrary, but NI advertises 1 to 20MHz
+        * range so we'll use that.
+        */
        if (period_ns < min_period_ns || period_ns > max_period_ns) {
                dev_err(dev->class_dev,
                        "%s: you must specify an input clock frequency between %i and %i nanosec for the phased-lock loop\n",
@@ -4955,7 +4975,7 @@ static int ni_mseries_set_pll_master_clock(struct comedi_device *dev,
 
        ni_writew(dev, pll_control_bits, NI_M_PLL_CTRL_REG);
        devpriv->clock_source = source;
-       /* it seems to typically take a few hundred microseconds for PLL to lock */
+       /* it takes a few hundred microseconds for PLL to lock */
        for (i = 0; i < timeout; ++i) {
                if (ni_readw(dev, NI_M_PLL_STATUS_REG) & NI_M_PLL_STATUS_LOCKED)
                        break;
@@ -5247,7 +5267,7 @@ static irqreturn_t ni_E_interrupt(int irq, void *d)
 
        if (!dev->attached)
                return IRQ_NONE;
-       smp_mb();               /*  make sure dev->attached is checked before handler does anything else. */
+       smp_mb();               /* make sure dev->attached is checked */
 
        /*  lock to avoid race with comedi_poll */
        spin_lock_irqsave(&dev->spinlock, flags);