ide-tape: remove struct idetape_capabilities_page_t
authorBorislav Petkov <bbpetkov@yahoo.de>
Sat, 2 Feb 2008 18:56:49 +0000 (19:56 +0100)
committerBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Sat, 2 Feb 2008 18:56:49 +0000 (19:56 +0100)
All those 2-byte values denoting the different capabilities are being written to
the local copy of the caps buffer without being converted to big endian for
simplicity of usage and shorter code later.  Also, we add some comments stating
which are the fields of the caps page in question in order to alleviate the
cryptic pointer casting exercises as in e.g. idetape_get_mode_sense_results().

There should be no functional changes resulting from this patch.

Bart:
- remove two needless "!!"

Signed-off-by: Borislav Petkov <bbpetkov@yahoo.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
drivers/ide/ide-tape.c

index 3d15e8e729eff38f1c34a3266c68f396d325f58d..6fa6a38d8116d187f6f82243465a4852dda51608 100644 (file)
@@ -259,47 +259,6 @@ typedef struct idetape_packet_command_s {
 /* Data direction */
 #define        PC_WRITING                      5
 
-/*
- *     Capabilities and Mechanical Status Page
- */
-typedef struct {
-       unsigned        page_code       :6;     /* Page code - Should be 0x2a */
-       __u8            reserved0_6     :1;
-       __u8            ps              :1;     /* parameters saveable */
-       __u8            page_length;            /* Page Length - Should be 0x12 */
-       __u8            reserved2, reserved3;
-       unsigned        ro              :1;     /* Read Only Mode */
-       unsigned        reserved4_1234  :4;
-       unsigned        sprev           :1;     /* Supports SPACE in the reverse direction */
-       unsigned        reserved4_67    :2;
-       unsigned        reserved5_012   :3;
-       unsigned        efmt            :1;     /* Supports ERASE command initiated formatting */
-       unsigned        reserved5_4     :1;
-       unsigned        qfa             :1;     /* Supports the QFA two partition formats */
-       unsigned        reserved5_67    :2;
-       unsigned        lock            :1;     /* Supports locking the volume */
-       unsigned        locked          :1;     /* The volume is locked */
-       unsigned        prevent         :1;     /* The device defaults in the prevent state after power up */   
-       unsigned        eject           :1;     /* The device can eject the volume */
-       __u8            disconnect      :1;     /* The device can break request > ctl */        
-       __u8            reserved6_5     :1;
-       unsigned        ecc             :1;     /* Supports error correction */
-       unsigned        cmprs           :1;     /* Supports data compression */
-       unsigned        reserved7_0     :1;
-       unsigned        blk512          :1;     /* Supports 512 bytes block size */
-       unsigned        blk1024         :1;     /* Supports 1024 bytes block size */
-       unsigned        reserved7_3_6   :4;
-       unsigned        blk32768        :1;     /* slowb - the device restricts the byte count for PIO */
-                                               /* transfers for slow buffer memory ??? */
-                                               /* Also 32768 block size in some cases */
-       __u16           max_speed;              /* Maximum speed supported in KBps */
-       __u8            reserved10, reserved11;
-       __u16           ctl;                    /* Continuous Transfer Limit in blocks */
-       __u16           speed;                  /* Current Speed, in KBps */
-       __u16           buffer_size;            /* Buffer Size, in 512 bytes */
-       __u8            reserved18, reserved19;
-} idetape_capabilities_page_t;
-
 /*
  *     Block Size Page
  */
@@ -417,8 +376,9 @@ typedef struct ide_tape_obj {
        /* Usually 512 or 1024 bytes */
        unsigned short tape_block_size;
        int user_bs_factor;
+
        /* Copy of the tape's Capabilities and Mechanical Page */
-       idetape_capabilities_page_t capabilities;
+       u8 caps[20];
 
        /*
         *      Active data transfer request parameters.
@@ -2464,7 +2424,8 @@ static int idetape_create_prevent_cmd (ide_drive_t *drive, idetape_pc_t *pc, int
 {
        idetape_tape_t *tape = drive->driver_data;
 
-       if (!tape->capabilities.lock)
+       /* device supports locking according to capabilities page */
+       if (!(tape->caps[6] & 0x01))
                return 0;
 
        idetape_init_pc(pc);
@@ -2850,7 +2811,7 @@ static int idetape_initiate_read (ide_drive_t *drive, int max_stages)
        idetape_stage_t *new_stage;
        struct request rq;
        int bytes_read;
-       int blocks = tape->capabilities.ctl;
+       u16 blocks = *(u16 *)&tape->caps[12];
 
        /* Initialize read operation */
        if (tape->chrdev_direction != idetape_direction_read) {
@@ -3090,11 +3051,12 @@ static int idetape_space_over_filemarks (ide_drive_t *drive,short mt_op,int mt_c
        idetape_pc_t pc;
        unsigned long flags;
        int retval,count=0;
+       int sprev = !!(tape->caps[4] & 0x20);
 
        if (mt_count == 0)
                return 0;
        if (MTBSF == mt_op || MTBSFM == mt_op) {
-               if (!tape->capabilities.sprev)
+               if (!sprev)
                        return -EIO;
                mt_count = - mt_count;
        }
@@ -3148,7 +3110,7 @@ static int idetape_space_over_filemarks (ide_drive_t *drive,short mt_op,int mt_c
                        return (idetape_queue_pc_tail(drive, &pc));
                case MTFSFM:
                case MTBSFM:
-                       if (!tape->capabilities.sprev)
+                       if (!sprev)
                                return (-EIO);
                        retval = idetape_space_over_filemarks(drive, MTFSF, mt_count-count);
                        if (retval) return (retval);
@@ -3185,6 +3147,7 @@ static ssize_t idetape_chrdev_read (struct file *file, char __user *buf,
        ide_drive_t *drive = tape->drive;
        ssize_t bytes_read,temp, actually_read = 0, rc;
        ssize_t ret = 0;
+       u16 ctl = *(u16 *)&tape->caps[12];
 
 #if IDETAPE_DEBUG_LOG
        if (tape->debug_level >= 3)
@@ -3210,7 +3173,7 @@ static ssize_t idetape_chrdev_read (struct file *file, char __user *buf,
                count -= actually_read;
        }
        while (count >= tape->stage_size) {
-               bytes_read = idetape_add_chrdev_read_request(drive, tape->capabilities.ctl);
+               bytes_read = idetape_add_chrdev_read_request(drive, ctl);
                if (bytes_read <= 0)
                        goto finish;
                if (idetape_copy_stage_to_user(tape, buf, tape->merge_stage, bytes_read))
@@ -3220,7 +3183,7 @@ static ssize_t idetape_chrdev_read (struct file *file, char __user *buf,
                actually_read += bytes_read;
        }
        if (count) {
-               bytes_read = idetape_add_chrdev_read_request(drive, tape->capabilities.ctl);
+               bytes_read = idetape_add_chrdev_read_request(drive, ctl);
                if (bytes_read <= 0)
                        goto finish;
                temp = min((unsigned long)count, (unsigned long)bytes_read);
@@ -3249,6 +3212,7 @@ static ssize_t idetape_chrdev_write (struct file *file, const char __user *buf,
        ide_drive_t *drive = tape->drive;
        ssize_t actually_written = 0;
        ssize_t ret = 0;
+       u16 ctl = *(u16 *)&tape->caps[12];
 
        /* The drive is write protected. */
        if (tape->write_prot)
@@ -3310,7 +3274,7 @@ static ssize_t idetape_chrdev_write (struct file *file, const char __user *buf,
                if (tape->merge_stage_size == tape->stage_size) {
                        ssize_t retval;
                        tape->merge_stage_size = 0;
-                       retval = idetape_add_chrdev_write_request(drive, tape->capabilities.ctl);
+                       retval = idetape_add_chrdev_write_request(drive, ctl);
                        if (retval <= 0)
                                return (retval);
                }
@@ -3321,7 +3285,7 @@ static ssize_t idetape_chrdev_write (struct file *file, const char __user *buf,
                        ret = -EFAULT;
                buf += tape->stage_size;
                count -= tape->stage_size;
-               retval = idetape_add_chrdev_write_request(drive, tape->capabilities.ctl);
+               retval = idetape_add_chrdev_write_request(drive, ctl);
                actually_written += tape->stage_size;
                if (retval <= 0)
                        return (retval);
@@ -3821,46 +3785,52 @@ static void idetape_get_inquiry_results (ide_drive_t *drive)
 }
 
 /*
- *     idetape_get_mode_sense_results asks the tape about its various
- *     parameters. In particular, we will adjust our data transfer buffer
- *     size to the recommended value as returned by the tape.
+ * Ask the tape about its various parameters. In particular, we will adjust our
+ * data transfer buffer        size to the recommended value as returned by the tape.
  */
 static void idetape_get_mode_sense_results (ide_drive_t *drive)
 {
        idetape_tape_t *tape = drive->driver_data;
        idetape_pc_t pc;
-       idetape_capabilities_page_t *capabilities;
+       u8 *caps;
+       u8 speed, max_speed;
 
        idetape_create_mode_sense_cmd(&pc, IDETAPE_CAPABILITIES_PAGE);
        if (idetape_queue_pc_tail(drive, &pc)) {
-               printk(KERN_ERR "ide-tape: Can't get tape parameters - assuming some default values\n");
+               printk(KERN_ERR "ide-tape: Can't get tape parameters - assuming"
+                               " some default values\n");
                tape->tape_block_size = 512;
-               tape->capabilities.ctl = 52;
-               tape->capabilities.speed = 450;
-               tape->capabilities.buffer_size = 6 * 52;
+               put_unaligned(52,   (u16 *)&tape->caps[12]);
+               put_unaligned(540,  (u16 *)&tape->caps[14]);
+               put_unaligned(6*52, (u16 *)&tape->caps[16]);
                return;
        }
-       capabilities = (idetape_capabilities_page_t *)
-               (pc.buffer + 4 + pc.buffer[3]);
+       caps = pc.buffer + 4 + pc.buffer[3];
+
+       /* convert to host order and save for later use */
+       speed = be16_to_cpu(*(u16 *)&caps[14]);
+       max_speed = be16_to_cpu(*(u16 *)&caps[8]);
 
-       capabilities->max_speed = ntohs(capabilities->max_speed);
-       capabilities->ctl = ntohs(capabilities->ctl);
-       capabilities->speed = ntohs(capabilities->speed);
-       capabilities->buffer_size = ntohs(capabilities->buffer_size);
+       put_unaligned(max_speed, (u16 *)&caps[8]);
+       put_unaligned(be16_to_cpu(*(u16 *)&caps[12]), (u16 *)&caps[12]);
+       put_unaligned(speed, (u16 *)&caps[14]);
+       put_unaligned(be16_to_cpu(*(u16 *)&caps[16]), (u16 *)&caps[16]);
 
-       if (!capabilities->speed) {
-               printk(KERN_INFO "ide-tape: %s: overriding capabilities->speed (assuming 650KB/sec)\n", drive->name);
-               capabilities->speed = 650;
+       if (!speed) {
+               printk(KERN_INFO "ide-tape: %s: invalid tape speed "
+                               "(assuming 650KB/sec)\n", drive->name);
+               put_unaligned(650, (u16 *)&caps[14]);
        }
-       if (!capabilities->max_speed) {
-               printk(KERN_INFO "ide-tape: %s: overriding capabilities->max_speed (assuming 650KB/sec)\n", drive->name);
-               capabilities->max_speed = 650;
+       if (!max_speed) {
+               printk(KERN_INFO "ide-tape: %s: invalid max_speed "
+                               "(assuming 650KB/sec)\n", drive->name);
+               put_unaligned(650, (u16 *)&caps[8]);
        }
 
-       tape->capabilities = *capabilities;             /* Save us a copy */
-       if (capabilities->blk512)
+       memcpy(&tape->caps, caps, 20);
+       if (caps[7] & 0x02)
                tape->tape_block_size = 512;
-       else if (capabilities->blk1024)
+       else if (caps[7] & 0x04)
                tape->tape_block_size = 1024;
 }
 
@@ -3897,13 +3867,15 @@ static void idetape_add_settings (ide_drive_t *drive)
 /*
  *                     drive   setting name            read/write      data type       min                     max                     mul_factor                      div_factor      data pointer                            set function
  */
-       ide_add_setting(drive,  "buffer",               SETTING_READ,   TYPE_SHORT,     0,                      0xffff,                 1,                              2,              &tape->capabilities.buffer_size,        NULL);
+       ide_add_setting(drive, "buffer", SETTING_READ, TYPE_SHORT, 0, 0xffff,
+                       1, 2, (u16 *)&tape->caps[16], NULL);
        ide_add_setting(drive,  "pipeline_min",         SETTING_RW,     TYPE_INT,       1,                      0xffff,                 tape->stage_size / 1024,        1,              &tape->min_pipeline,                    NULL);
        ide_add_setting(drive,  "pipeline",             SETTING_RW,     TYPE_INT,       1,                      0xffff,                 tape->stage_size / 1024,        1,              &tape->max_stages,                      NULL);
        ide_add_setting(drive,  "pipeline_max",         SETTING_RW,     TYPE_INT,       1,                      0xffff,                 tape->stage_size / 1024,        1,              &tape->max_pipeline,                    NULL);
        ide_add_setting(drive,  "pipeline_used",        SETTING_READ,   TYPE_INT,       0,                      0xffff,                 tape->stage_size / 1024,        1,              &tape->nr_stages,                       NULL);
        ide_add_setting(drive,  "pipeline_pending",     SETTING_READ,   TYPE_INT,       0,                      0xffff,                 tape->stage_size / 1024,        1,              &tape->nr_pending_stages,               NULL);
-       ide_add_setting(drive,  "speed",                SETTING_READ,   TYPE_SHORT,     0,                      0xffff,                 1,                              1,              &tape->capabilities.speed,              NULL);
+       ide_add_setting(drive, "speed", SETTING_READ, TYPE_SHORT, 0, 0xffff,
+                       1, 1, (u16 *)&tape->caps[14], NULL);
        ide_add_setting(drive,  "stage",                SETTING_READ,   TYPE_INT,       0,                      0xffff,                 1,                              1024,           &tape->stage_size,                      NULL);
        ide_add_setting(drive,  "tdsc",                 SETTING_RW,     TYPE_INT,       IDETAPE_DSC_RW_MIN,     IDETAPE_DSC_RW_MAX,     1000,                           HZ,             &tape->best_dsc_rw_frequency,           NULL);
        ide_add_setting(drive,  "dsc_overlap",          SETTING_RW,     TYPE_BYTE,      0,                      1,                      1,                              1,              &drive->dsc_overlap,                    NULL);
@@ -3935,6 +3907,7 @@ static void idetape_setup (ide_drive_t *drive, idetape_tape_t *tape, int minor)
        struct idetape_id_gcw gcw;
        int stage_size;
        struct sysinfo si;
+       u16 *ctl = (u16 *)&tape->caps[12];
 
        spin_lock_init(&tape->spinlock);
        drive->dsc_overlap = 1;
@@ -3964,11 +3937,11 @@ static void idetape_setup (ide_drive_t *drive, idetape_tape_t *tape, int minor)
        idetape_get_mode_sense_results(drive);
        idetape_get_blocksize_from_block_descriptor(drive);
        tape->user_bs_factor = 1;
-       tape->stage_size = tape->capabilities.ctl * tape->tape_block_size;
+       tape->stage_size = *ctl * tape->tape_block_size;
        while (tape->stage_size > 0xffff) {
                printk(KERN_NOTICE "ide-tape: decreasing stage size\n");
-               tape->capabilities.ctl /= 2;
-               tape->stage_size = tape->capabilities.ctl * tape->tape_block_size;
+               *ctl /= 2;
+               tape->stage_size = *ctl * tape->tape_block_size;
        }
        stage_size = tape->stage_size;
        tape->pages_per_stage = stage_size / PAGE_SIZE;
@@ -3977,11 +3950,8 @@ static void idetape_setup (ide_drive_t *drive, idetape_tape_t *tape, int minor)
                tape->excess_bh_size = PAGE_SIZE - stage_size % PAGE_SIZE;
        }
 
-       /*
-        *      Select the "best" DSC read/write polling frequency
-        *      and pipeline size.
-        */
-       speed = max(tape->capabilities.speed, tape->capabilities.max_speed);
+       /* Select the "best" DSC read/write polling freq and pipeline size. */
+       speed = max(*(u16 *)&tape->caps[14], *(u16 *)&tape->caps[8]);
 
        tape->max_stages = speed * 1000 * 10 / tape->stage_size;
 
@@ -3998,7 +3968,7 @@ static void idetape_setup (ide_drive_t *drive, idetape_tape_t *tape, int minor)
                tape->max_stages = tape->min_pipeline = tape->max_pipeline = 1;
 
        t1 = (tape->stage_size * HZ) / (speed * 1000);
-       tmid = (tape->capabilities.buffer_size * 32 * HZ) / (speed * 125);
+       tmid = (*(u16 *)&tape->caps[16] * 32 * HZ) / (speed * 125);
        tn = (IDETAPE_FIFO_THRESHOLD * tape->stage_size * HZ) / (speed * 1000);
 
        if (tape->max_stages)
@@ -4013,8 +3983,8 @@ static void idetape_setup (ide_drive_t *drive, idetape_tape_t *tape, int minor)
        tape->best_dsc_rw_frequency = max_t(unsigned long, min_t(unsigned long, t, IDETAPE_DSC_RW_MAX), IDETAPE_DSC_RW_MIN);
        printk(KERN_INFO "ide-tape: %s <-> %s: %dKBps, %d*%dkB buffer, "
                "%dkB pipeline, %lums tDSC%s\n",
-               drive->name, tape->name, tape->capabilities.speed,
-               (tape->capabilities.buffer_size * 512) / tape->stage_size,
+               drive->name, tape->name, *(u16 *)&tape->caps[14],
+               (*(u16 *)&tape->caps[16] * 512) / tape->stage_size,
                tape->stage_size / 1024,
                tape->max_stages * tape->stage_size / 1024,
                tape->best_dsc_rw_frequency * 1000 / HZ,