i2c-designware: add support for Intel Lynxpoint
authorMika Westerberg <mika.westerberg@linux.intel.com>
Thu, 17 Jan 2013 10:31:07 +0000 (12:31 +0200)
committerWolfram Sang <w.sang@pengutronix.de>
Mon, 28 Jan 2013 04:26:42 +0000 (05:26 +0100)
Intel Lynxpoint has two I2C controllers. These controllers are enumerated
from ACPI namespace with IDs INT33C2 and INT33C3. Add support for these to
the I2C DesignWare platform driver.

This is based on the work of Dirk Brandewie.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
drivers/i2c/busses/i2c-designware-platdrv.c

index d8afc85420be0a524d31c9c4d430e4253bd02a59..d2a33e93f8ab9e972d9a893abdaed81f853a256b 100644 (file)
@@ -40,6 +40,7 @@
 #include <linux/pm_runtime.h>
 #include <linux/io.h>
 #include <linux/slab.h>
+#include <linux/acpi.h>
 #include "i2c-designware-core.h"
 
 static struct i2c_algorithm i2c_dw_algo = {
@@ -51,6 +52,42 @@ static u32 i2c_dw_get_clk_rate_khz(struct dw_i2c_dev *dev)
        return clk_get_rate(dev->clk)/1000;
 }
 
+#ifdef CONFIG_ACPI
+static int dw_i2c_acpi_configure(struct platform_device *pdev)
+{
+       struct dw_i2c_dev *dev = platform_get_drvdata(pdev);
+       struct acpi_device *adev;
+       int busno, ret;
+
+       if (!ACPI_HANDLE(&pdev->dev))
+               return -ENODEV;
+
+       ret = acpi_bus_get_device(ACPI_HANDLE(&pdev->dev), &adev);
+       if (ret)
+               return -ENODEV;
+
+       dev->adapter.nr = -1;
+       if (adev->pnp.unique_id && !kstrtoint(adev->pnp.unique_id, 0, &busno))
+               dev->adapter.nr = busno;
+
+       dev->tx_fifo_depth = 32;
+       dev->rx_fifo_depth = 32;
+       return 0;
+}
+
+static const struct acpi_device_id dw_i2c_acpi_match[] = {
+       { "INT33C2", 0 },
+       { "INT33C3", 0 },
+       { }
+};
+MODULE_DEVICE_TABLE(acpi, dw_i2c_acpi_match);
+#else
+static inline int dw_i2c_acpi_configure(struct platform_device *pdev)
+{
+       return -ENODEV;
+}
+#endif
+
 static int dw_i2c_probe(struct platform_device *pdev)
 {
        struct dw_i2c_dev *dev;
@@ -115,18 +152,22 @@ static int dw_i2c_probe(struct platform_device *pdev)
                r = -EBUSY;
                goto err_unuse_clocks;
        }
-       {
+
+       /* Try first if we can configure the device from ACPI */
+       r = dw_i2c_acpi_configure(pdev);
+       if (r) {
                u32 param1 = i2c_dw_read_comp_param(dev);
 
                dev->tx_fifo_depth = ((param1 >> 16) & 0xff) + 1;
                dev->rx_fifo_depth = ((param1 >> 8)  & 0xff) + 1;
+               dev->adapter.nr = pdev->id;
        }
        r = i2c_dw_init(dev);
        if (r)
                goto err_iounmap;
 
        i2c_dw_disable_int(dev);
-       r = request_irq(dev->irq, i2c_dw_isr, IRQF_DISABLED, pdev->name, dev);
+       r = request_irq(dev->irq, i2c_dw_isr, IRQF_SHARED, pdev->name, dev);
        if (r) {
                dev_err(&pdev->dev, "failure requesting irq %i\n", dev->irq);
                goto err_iounmap;
@@ -141,14 +182,15 @@ static int dw_i2c_probe(struct platform_device *pdev)
        adap->algo = &i2c_dw_algo;
        adap->dev.parent = &pdev->dev;
        adap->dev.of_node = pdev->dev.of_node;
+       ACPI_HANDLE_SET(&adap->dev, ACPI_HANDLE(&pdev->dev));
 
-       adap->nr = pdev->id;
        r = i2c_add_numbered_adapter(adap);
        if (r) {
                dev_err(&pdev->dev, "failure adding adapter\n");
                goto err_free_irq;
        }
        of_i2c_register_devices(adap);
+       acpi_i2c_register_devices(adap);
 
        pm_runtime_set_active(&pdev->dev);
        pm_runtime_enable(&pdev->dev);
@@ -243,6 +285,7 @@ static struct platform_driver dw_i2c_driver = {
                .name   = "i2c_designware",
                .owner  = THIS_MODULE,
                .of_match_table = of_match_ptr(dw_i2c_of_match),
+               .acpi_match_table = ACPI_PTR(dw_i2c_acpi_match),
                .pm     = &dw_i2c_dev_pm_ops,
        },
 };