i2c-nomadik: remove the unnecessary delay
authorVirupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com>
Fri, 13 May 2011 10:30:42 +0000 (12:30 +0200)
committerBen Dooks <ben-linux@fluff.org>
Tue, 24 May 2011 23:20:50 +0000 (00:20 +0100)
The delay in the driver seems to be not needed, so remove it.

Signed-off-by: Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com>
Reviewed-by: Markus Grape <markus.grape@stericsson.com>
Tested-by: Per Persson <per.xb.persson@stericsson.com>
Tested-by: Chethan Krishna N <chethan.krishna@stericsson.com>
Reviewed-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
drivers/i2c/busses/i2c-nomadik.c

index e3cd62e40df580e5bb8cdb151bd41a308da4cd55..b2de1a56dc8d2b6fb70bf5e3464affaef35dc301 100644 (file)
@@ -15,7 +15,6 @@
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
-#include <linux/delay.h>
 #include <linux/slab.h>
 #include <linux/interrupt.h>
 #include <linux/i2c.h>
 /* maximum threshold value */
 #define MAX_I2C_FIFO_THRESHOLD 15
 
-/* per-transfer delay, required for the hardware to stabilize */
-#define I2C_DELAY              150
-
 enum i2c_status {
        I2C_NOP,
        I2C_ON_GOING,
@@ -269,12 +265,6 @@ static int init_hw(struct nmk_i2c_dev *dev)
        dev->cli.operation = I2C_NO_OPERATION;
 
 exit:
-       /*
-        * TODO: What is this delay for?
-        * Must be pretty pointless since the hw block
-        * is frozen. Or?
-        */
-       udelay(I2C_DELAY);
        return stat;
 }
 
@@ -652,7 +642,6 @@ static int nmk_i2c_xfer(struct i2c_adapter *i2c_adap,
 
                                break;
                        }
-                       udelay(I2C_DELAY);
                }
                if (status == 0)
                        break;
@@ -778,13 +767,8 @@ static irqreturn_t i2c_irq_handler(int irq, void *arg)
                        }
                }
 
-               i2c_set_bit(dev->virtbase + I2C_ICR, I2C_IT_MTD);
-               i2c_set_bit(dev->virtbase + I2C_ICR, I2C_IT_MTDWS);
-
-               disable_interrupts(dev,
-                               (I2C_IT_TXFNE | I2C_IT_TXFE | I2C_IT_TXFF
-                                       | I2C_IT_TXFOVR | I2C_IT_RXFNF
-                                       | I2C_IT_RXFF | I2C_IT_RXFE));
+               disable_all_interrupts(dev);
+               clear_all_interrupts(dev);
 
                if (dev->cli.count) {
                        dev->result = -EIO;