struct link_config *lc);
int t4_restart_aneg(struct adapter *adap, unsigned int mbox, unsigned int port);
+u32 t4_read_pcie_cfg4(struct adapter *adap, int reg);
+u32 t4_get_util_window(struct adapter *adap);
+void t4_setup_memwin(struct adapter *adap, u32 memwin_base, u32 window);
+
#define T4_MEMORY_WRITE 0
#define T4_MEMORY_READ 1
int t4_memory_rw(struct adapter *adap, int win, int mtype, u32 addr, u32 len,
dev_alert(adap->pdev_dev, "encountered fatal error, adapter stopped\n");
}
-/* Return the specified PCI-E Configuration Space register from our Physical
- * Function. We try first via a Firmware LDST Command since we prefer to let
- * the firmware own all of these registers, but if that fails we go for it
- * directly ourselves.
- */
-static u32 t4_read_pcie_cfg4(struct adapter *adap, int reg)
-{
- struct fw_ldst_cmd ldst_cmd;
- u32 val;
- int ret;
-
- /* Construct and send the Firmware LDST Command to retrieve the
- * specified PCI-E Configuration Space register.
- */
- memset(&ldst_cmd, 0, sizeof(ldst_cmd));
- ldst_cmd.op_to_addrspace =
- htonl(FW_CMD_OP_V(FW_LDST_CMD) |
- FW_CMD_REQUEST_F |
- FW_CMD_READ_F |
- FW_LDST_CMD_ADDRSPACE_V(FW_LDST_ADDRSPC_FUNC_PCIE));
- ldst_cmd.cycles_to_len16 = htonl(FW_LEN16(ldst_cmd));
- ldst_cmd.u.pcie.select_naccess = FW_LDST_CMD_NACCESS_V(1);
- ldst_cmd.u.pcie.ctrl_to_fn =
- (FW_LDST_CMD_LC_F | FW_LDST_CMD_FN_V(adap->fn));
- ldst_cmd.u.pcie.r = reg;
- ret = t4_wr_mbox(adap, adap->mbox, &ldst_cmd, sizeof(ldst_cmd),
- &ldst_cmd);
-
- /* If the LDST Command suucceeded, exctract the returned register
- * value. Otherwise read it directly ourself.
- */
- if (ret == 0)
- val = ntohl(ldst_cmd.u.pcie.data[0]);
- else
- t4_hw_pci_read_cfg4(adap, reg, &val);
-
- return val;
-}
-
static void setup_memwin(struct adapter *adap)
{
- u32 mem_win0_base, mem_win1_base, mem_win2_base, mem_win2_aperture;
+ u32 nic_win_base = t4_get_util_window(adap);
- if (is_t4(adap->params.chip)) {
- u32 bar0;
-
- /* Truncation intentional: we only read the bottom 32-bits of
- * the 64-bit BAR0/BAR1 ... We use the hardware backdoor
- * mechanism to read BAR0 instead of using
- * pci_resource_start() because we could be operating from
- * within a Virtual Machine which is trapping our accesses to
- * our Configuration Space and we need to set up the PCI-E
- * Memory Window decoders with the actual addresses which will
- * be coming across the PCI-E link.
- */
- bar0 = t4_read_pcie_cfg4(adap, PCI_BASE_ADDRESS_0);
- bar0 &= PCI_BASE_ADDRESS_MEM_MASK;
- adap->t4_bar0 = bar0;
-
- mem_win0_base = bar0 + MEMWIN0_BASE;
- mem_win1_base = bar0 + MEMWIN1_BASE;
- mem_win2_base = bar0 + MEMWIN2_BASE;
- mem_win2_aperture = MEMWIN2_APERTURE;
- } else {
- /* For T5, only relative offset inside the PCIe BAR is passed */
- mem_win0_base = MEMWIN0_BASE;
- mem_win1_base = MEMWIN1_BASE;
- mem_win2_base = MEMWIN2_BASE_T5;
- mem_win2_aperture = MEMWIN2_APERTURE_T5;
- }
- t4_write_reg(adap, PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_BASE_WIN_A, 0),
- mem_win0_base | BIR_V(0) |
- WINDOW_V(ilog2(MEMWIN0_APERTURE) - 10));
- t4_write_reg(adap, PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_BASE_WIN_A, 1),
- mem_win1_base | BIR_V(0) |
- WINDOW_V(ilog2(MEMWIN1_APERTURE) - 10));
- t4_write_reg(adap, PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_BASE_WIN_A, 2),
- mem_win2_base | BIR_V(0) |
- WINDOW_V(ilog2(mem_win2_aperture) - 10));
- t4_read_reg(adap, PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_BASE_WIN_A, 2));
+ t4_setup_memwin(adap, nic_win_base, MEMWIN_NIC);
}
static void setup_memwin_rdma(struct adapter *adap)
return 0;
}
+/* Return the specified PCI-E Configuration Space register from our Physical
+ * Function. We try first via a Firmware LDST Command since we prefer to let
+ * the firmware own all of these registers, but if that fails we go for it
+ * directly ourselves.
+ */
+u32 t4_read_pcie_cfg4(struct adapter *adap, int reg)
+{
+ u32 val, ldst_addrspace;
+
+ /* If fw_attach != 0, construct and send the Firmware LDST Command to
+ * retrieve the specified PCI-E Configuration Space register.
+ */
+ struct fw_ldst_cmd ldst_cmd;
+ int ret;
+
+ memset(&ldst_cmd, 0, sizeof(ldst_cmd));
+ ldst_addrspace = FW_LDST_CMD_ADDRSPACE_V(FW_LDST_ADDRSPC_FUNC_PCIE);
+ ldst_cmd.op_to_addrspace = cpu_to_be32(FW_CMD_OP_V(FW_LDST_CMD) |
+ FW_CMD_REQUEST_F |
+ FW_CMD_READ_F |
+ ldst_addrspace);
+ ldst_cmd.cycles_to_len16 = cpu_to_be32(FW_LEN16(ldst_cmd));
+ ldst_cmd.u.pcie.select_naccess = FW_LDST_CMD_NACCESS_V(1);
+ ldst_cmd.u.pcie.ctrl_to_fn =
+ (FW_LDST_CMD_LC_F | FW_LDST_CMD_FN_V(adap->fn));
+ ldst_cmd.u.pcie.r = reg;
+
+ /* If the LDST Command succeeds, return the result, otherwise
+ * fall through to reading it directly ourselves ...
+ */
+ ret = t4_wr_mbox(adap, adap->mbox, &ldst_cmd, sizeof(ldst_cmd),
+ &ldst_cmd);
+ if (ret == 0)
+ val = be32_to_cpu(ldst_cmd.u.pcie.data[0]);
+ else
+ /* Read the desired Configuration Space register via the PCI-E
+ * Backdoor mechanism.
+ */
+ t4_hw_pci_read_cfg4(adap, reg, &val);
+ return val;
+}
+
+/* Get the window based on base passed to it.
+ * Window aperture is currently unhandled, but there is no use case for it
+ * right now
+ */
+static u32 t4_get_window(struct adapter *adap, u32 pci_base, u64 pci_mask,
+ u32 memwin_base)
+{
+ u32 ret;
+
+ if (is_t4(adap->params.chip)) {
+ u32 bar0;
+
+ /* Truncation intentional: we only read the bottom 32-bits of
+ * the 64-bit BAR0/BAR1 ... We use the hardware backdoor
+ * mechanism to read BAR0 instead of using
+ * pci_resource_start() because we could be operating from
+ * within a Virtual Machine which is trapping our accesses to
+ * our Configuration Space and we need to set up the PCI-E
+ * Memory Window decoders with the actual addresses which will
+ * be coming across the PCI-E link.
+ */
+ bar0 = t4_read_pcie_cfg4(adap, pci_base);
+ bar0 &= pci_mask;
+ adap->t4_bar0 = bar0;
+
+ ret = bar0 + memwin_base;
+ } else {
+ /* For T5, only relative offset inside the PCIe BAR is passed */
+ ret = memwin_base;
+ }
+ return ret;
+}
+
+/* Get the default utility window (win0) used by everyone */
+u32 t4_get_util_window(struct adapter *adap)
+{
+ return t4_get_window(adap, PCI_BASE_ADDRESS_0,
+ PCI_BASE_ADDRESS_MEM_MASK, MEMWIN0_BASE);
+}
+
+/* Set up memory window for accessing adapter memory ranges. (Read
+ * back MA register to ensure that changes propagate before we attempt
+ * to use the new values.)
+ */
+void t4_setup_memwin(struct adapter *adap, u32 memwin_base, u32 window)
+{
+ t4_write_reg(adap,
+ PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_BASE_WIN_A, window),
+ memwin_base | BIR_V(0) |
+ WINDOW_V(ilog2(MEMWIN0_APERTURE) - WINDOW_SHIFT_X));
+ t4_read_reg(adap,
+ PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_BASE_WIN_A, window));
+}
+
/**
* t4_get_regs_len - return the size of the chips register set
* @adapter: the adapter
projects / GitHub / LineageOS / G12 / android_kernel_amlogic_linux-4.9.git / commitdiff