mfd: Add support for remapping twl4030-power power states
authorAmit Kucheria <amit.kucheria@verdurent.com>
Mon, 19 Oct 2009 12:11:00 +0000 (15:11 +0300)
committerSamuel Ortiz <sameo@linux.intel.com>
Sun, 13 Dec 2009 18:21:24 +0000 (19:21 +0100)
The <RESOURCE>_REMAP register allows configuration of the <RESOURCE> in case
of a sleep or off transition.

Allow this property of resources to be configured (through twl4030_resconfig)
and add code to parse these values to program the registers accordingly.

Signed-off-by: Amit Kucheria <amit.kucheria@verdurent.com>
Cc: linux-omap@vger.kernel.org
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
drivers/mfd/twl4030-power.c
include/linux/i2c/twl4030.h

index 2c38ac17ab648395b022ed667e29e77d7b81d757..3e41e0c0e4c65143bf307a39c8bc88a74853d862 100644 (file)
@@ -75,6 +75,8 @@ static u8 twl4030_start_script_address = 0x2b;
 */
 #define DEV_GRP_OFFSET         0
 #define TYPE_OFFSET            1
+#define REMAP_OFFSET           2
+#define DEDICATED_OFFSET       3
 
 /* Bit positions in the registers */
 
@@ -88,6 +90,12 @@ static u8 twl4030_start_script_address = 0x2b;
 #define TYPE2_SHIFT            3
 #define TYPE2_MASK             (3 << TYPE2_SHIFT)
 
+/* <RESOURCE>_REMAP */
+#define SLEEP_STATE_SHIFT      0
+#define SLEEP_STATE_MASK       (0xf << SLEEP_STATE_SHIFT)
+#define OFF_STATE_SHIFT                4
+#define OFF_STATE_MASK         (0xf << OFF_STATE_SHIFT)
+
 static u8 res_config_addrs[] = {
        [RES_VAUX1]     = 0x17,
        [RES_VAUX2]     = 0x1b,
@@ -325,6 +333,7 @@ static int __init twl4030_configure_resource(struct twl4030_resconfig *rconfig)
        int err;
        u8 type;
        u8 grp;
+       u8 remap;
 
        if (rconfig->resource > TOTAL_RESOURCES) {
                pr_err("TWL4030 Resource %d does not exist\n",
@@ -380,6 +389,33 @@ static int __init twl4030_configure_resource(struct twl4030_resconfig *rconfig)
                return err;
        }
 
+       /* Set remap states */
+       err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_RECEIVER, &remap,
+                               rconfig_addr + REMAP_OFFSET);
+       if (err < 0) {
+               pr_err("TWL4030 Resource %d remap could not be read\n",
+                       rconfig->resource);
+               return err;
+       }
+
+       if (rconfig->remap_off >= 0) {
+               remap &= ~OFF_STATE_MASK;
+               remap |= rconfig->remap_off << OFF_STATE_SHIFT;
+       }
+
+       if (rconfig->remap_sleep >= 0) {
+               remap &= ~SLEEP_STATE_MASK;
+               remap |= rconfig->remap_off << SLEEP_STATE_SHIFT;
+       }
+
+       err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
+                               remap,
+                               rconfig_addr + REMAP_OFFSET);
+       if (err < 0) {
+               pr_err("TWL4030 failed to program remap\n");
+               return err;
+       }
+
        return 0;
 }
 
index 5306a759cbdede6e70245440a5140f2df7821e03..e87cb270d8a12ae4c28d1519420a3d36754b3116 100644 (file)
@@ -250,6 +250,7 @@ int twl4030_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes);
 
 #define RES_TYPE_ALL           0x7
 
+/* Resource states */
 #define RES_STATE_WRST         0xF
 #define RES_STATE_ACTIVE       0xE
 #define RES_STATE_SLEEP                0x8
@@ -391,6 +392,8 @@ struct twl4030_resconfig {
        u8 devgroup;    /* Processor group that Power resource belongs to */
        u8 type;        /* Power resource addressed, 6 / broadcast message */
        u8 type2;       /* Power resource addressed, 3 / broadcast message */
+       u8 remap_off;   /* off state remapping */
+       u8 remap_sleep; /* sleep state remapping */
 };
 
 struct twl4030_power_data {