usb: dwc2: gadget: initialize controller in pullup callback

USB reset interrupt is no more used to reset the controller.
Thus, reset the controller in pullup callback as described by
Synopsys programming guide. Otherwise enumeration sometimes
fails when usb configuration is switched without physical
disconnection.

Tested-by: Robert Baldyga <r.baldyga@samsung.com>
Acked-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Gregory Herrero <gregory.herrero@intel.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
index f201f6d17bc7981e565656768ebb0f769dcacdf6..15aa5785090b8439c15acfc669d22ca169b7701b 100644 (file)
--- a/drivers/usb/dwc2/gadget.c
+++ b/drivers/usb/dwc2/gadget.c
@@ -3162,6 +3162,7 @@ static int s3c_hsotg_pullup(struct usb_gadget *gadget, int is_on)
        if (is_on) {
                clk_enable(hsotg->clk);
                hsotg->enabled = 1;
+               s3c_hsotg_core_init_disconnected(hsotg, false);
                s3c_hsotg_core_connect(hsotg);
        } else {
                s3c_hsotg_core_disconnect(hsotg);