#include <linux/init.h>
#include <linux/smp.h>
+#include <asm/visws/cobalt.h>
+#include <asm/visws/piix4.h>
#include <asm/arch_hooks.h>
#include <asm/fixmap.h>
#include <asm/reboot.h>
#include <mach_ipi.h>
-#include "cobalt.h"
-#include "piix4.h"
#include "mach_apic.h"
#include <linux/init.h>
#include <linux/pci_ids.h>
#include <asm/io.h>
-#include <asm/arch_hooks.h>
#include <asm/apic.h>
-#include "cobalt.h"
-#include "lithium.h"
+#include <asm/arch_hooks.h>
+#include <asm/visws/cobalt.h>
+#include <asm/visws/lithium.h>
#define A01234 (LI_INTA_0 | LI_INTA_1 | LI_INTA_2 | LI_INTA_3 | LI_INTA_4)
#include <asm/apic.h>
#include <asm/i8259.h>
#include <asm/irq_vectors.h>
-
-#include "cobalt.h"
+#include <asm/visws/cobalt.h>
static DEFINE_SPINLOCK(cobalt_lock);
#include <linux/init.h>
#include <asm/setup.h>
-#include "cobalt.h"
-#include "lithium.h"
+#include <asm/visws/cobalt.h>
+#include <asm/visws/lithium.h>
#include "pci.h"
+++ /dev/null
-#ifndef __I386_SGI_COBALT_H
-#define __I386_SGI_COBALT_H
-
-#include <asm/fixmap.h>
-
-/*
- * Cobalt SGI Visual Workstation system ASIC
- */
-
-#define CO_CPU_NUM_PHYS 0x1e00
-#define CO_CPU_TAB_PHYS (CO_CPU_NUM_PHYS + 2)
-
-#define CO_CPU_MAX 4
-
-#define CO_CPU_PHYS 0xc2000000
-#define CO_APIC_PHYS 0xc4000000
-
-/* see set_fixmap() and asm/fixmap.h */
-#define CO_CPU_VADDR (fix_to_virt(FIX_CO_CPU))
-#define CO_APIC_VADDR (fix_to_virt(FIX_CO_APIC))
-
-/* Cobalt CPU registers -- relative to CO_CPU_VADDR, use co_cpu_*() */
-#define CO_CPU_REV 0x08
-#define CO_CPU_CTRL 0x10
-#define CO_CPU_STAT 0x20
-#define CO_CPU_TIMEVAL 0x30
-
-/* CO_CPU_CTRL bits */
-#define CO_CTRL_TIMERUN 0x04 /* 0 == disabled */
-#define CO_CTRL_TIMEMASK 0x08 /* 0 == unmasked */
-
-/* CO_CPU_STATUS bits */
-#define CO_STAT_TIMEINTR 0x02 /* (r) 1 == int pend, (w) 0 == clear */
-
-/* CO_CPU_TIMEVAL value */
-#define CO_TIME_HZ 100000000 /* Cobalt core rate */
-
-/* Cobalt APIC registers -- relative to CO_APIC_VADDR, use co_apic_*() */
-#define CO_APIC_HI(n) (((n) * 0x10) + 4)
-#define CO_APIC_LO(n) ((n) * 0x10)
-#define CO_APIC_ID 0x0ffc
-
-/* CO_APIC_ID bits */
-#define CO_APIC_ENABLE 0x00000100
-
-/* CO_APIC_LO bits */
-#define CO_APIC_MASK 0x00010000 /* 0 = enabled */
-#define CO_APIC_LEVEL 0x00008000 /* 0 = edge */
-
-/*
- * Where things are physically wired to Cobalt
- * #defines with no board _<type>_<rev>_ are common to all (thus far)
- */
-#define CO_APIC_IDE0 4
-#define CO_APIC_IDE1 2 /* Only on 320 */
-
-#define CO_APIC_8259 12 /* serial, floppy, par-l-l */
-
-/* Lithium PCI Bridge A -- "the one with 82557 Ethernet" */
-#define CO_APIC_PCIA_BASE0 0 /* and 1 */ /* slot 0, line 0 */
-#define CO_APIC_PCIA_BASE123 5 /* and 6 */ /* slot 0, line 1 */
-
-#define CO_APIC_PIIX4_USB 7 /* this one is weird */
-
-/* Lithium PCI Bridge B -- "the one with PIIX4" */
-#define CO_APIC_PCIB_BASE0 8 /* and 9-12 *//* slot 0, line 0 */
-#define CO_APIC_PCIB_BASE123 13 /* 14.15 */ /* slot 0, line 1 */
-
-#define CO_APIC_VIDOUT0 16
-#define CO_APIC_VIDOUT1 17
-#define CO_APIC_VIDIN0 18
-#define CO_APIC_VIDIN1 19
-
-#define CO_APIC_LI_AUDIO 22
-
-#define CO_APIC_AS 24
-#define CO_APIC_RE 25
-
-#define CO_APIC_CPU 28 /* Timer and Cache interrupt */
-#define CO_APIC_NMI 29
-#define CO_APIC_LAST CO_APIC_NMI
-
-/*
- * This is how irqs are assigned on the Visual Workstation.
- * Legacy devices get irq's 1-15 (system clock is 0 and is CO_APIC_CPU).
- * All other devices (including PCI) go to Cobalt and are irq's 16 on up.
- */
-#define CO_IRQ_APIC0 16 /* irq of apic entry 0 */
-#define IS_CO_APIC(irq) ((irq) >= CO_IRQ_APIC0)
-#define CO_IRQ(apic) (CO_IRQ_APIC0 + (apic)) /* apic ent to irq */
-#define CO_APIC(irq) ((irq) - CO_IRQ_APIC0) /* irq to apic ent */
-#define CO_IRQ_IDE0 14 /* knowledge of... */
-#define CO_IRQ_IDE1 15 /* ... ide driver defaults! */
-#define CO_IRQ_8259 CO_IRQ(CO_APIC_8259)
-
-#ifdef CONFIG_X86_VISWS_APIC
-static inline void co_cpu_write(unsigned long reg, unsigned long v)
-{
- *((volatile unsigned long *)(CO_CPU_VADDR+reg))=v;
-}
-
-static inline unsigned long co_cpu_read(unsigned long reg)
-{
- return *((volatile unsigned long *)(CO_CPU_VADDR+reg));
-}
-
-static inline void co_apic_write(unsigned long reg, unsigned long v)
-{
- *((volatile unsigned long *)(CO_APIC_VADDR+reg))=v;
-}
-
-static inline unsigned long co_apic_read(unsigned long reg)
-{
- return *((volatile unsigned long *)(CO_APIC_VADDR+reg));
-}
-#endif
-
-extern char visws_board_type;
-
-#define VISWS_320 0
-#define VISWS_540 1
-
-extern char visws_board_rev;
-
-#endif /* __I386_SGI_COBALT_H */
+++ /dev/null
-#ifndef __I386_SGI_LITHIUM_H
-#define __I386_SGI_LITHIUM_H
-
-#include <asm/fixmap.h>
-
-/*
- * Lithium is the SGI Visual Workstation I/O ASIC
- */
-
-#define LI_PCI_A_PHYS 0xfc000000 /* Enet is dev 3 */
-#define LI_PCI_B_PHYS 0xfd000000 /* PIIX4 is here */
-
-/* see set_fixmap() and asm/fixmap.h */
-#define LI_PCIA_VADDR (fix_to_virt(FIX_LI_PCIA))
-#define LI_PCIB_VADDR (fix_to_virt(FIX_LI_PCIB))
-
-/* Not a standard PCI? (not in linux/pci.h) */
-#define LI_PCI_BUSNUM 0x44 /* lo8: primary, hi8: sub */
-#define LI_PCI_INTEN 0x46
-
-/* LI_PCI_INTENT bits */
-#define LI_INTA_0 0x0001
-#define LI_INTA_1 0x0002
-#define LI_INTA_2 0x0004
-#define LI_INTA_3 0x0008
-#define LI_INTA_4 0x0010
-#define LI_INTB 0x0020
-#define LI_INTC 0x0040
-#define LI_INTD 0x0080
-
-/* More special purpose macros... */
-static inline void li_pcia_write16(unsigned long reg, unsigned short v)
-{
- *((volatile unsigned short *)(LI_PCIA_VADDR+reg))=v;
-}
-
-static inline unsigned short li_pcia_read16(unsigned long reg)
-{
- return *((volatile unsigned short *)(LI_PCIA_VADDR+reg));
-}
-
-static inline void li_pcib_write16(unsigned long reg, unsigned short v)
-{
- *((volatile unsigned short *)(LI_PCIB_VADDR+reg))=v;
-}
-
-static inline unsigned short li_pcib_read16(unsigned long reg)
-{
- return *((volatile unsigned short *)(LI_PCIB_VADDR+reg));
-}
-
-#endif
-
+++ /dev/null
-#ifndef __I386_SGI_PIIX_H
-#define __I386_SGI_PIIX_H
-
-/*
- * PIIX4 as used on SGI Visual Workstations
- */
-
-#define PIIX_PM_START 0x0F80
-
-#define SIO_GPIO_START 0x0FC0
-
-#define SIO_PM_START 0x0FC8
-
-#define PMBASE PIIX_PM_START
-#define GPIREG0 (PMBASE+0x30)
-#define GPIREG(x) (GPIREG0+((x)/8))
-#define GPIBIT(x) (1 << ((x)%8))
-
-#define PIIX_GPI_BD_ID1 18
-#define PIIX_GPI_BD_ID2 19
-#define PIIX_GPI_BD_ID3 20
-#define PIIX_GPI_BD_ID4 21
-#define PIIX_GPI_BD_REG GPIREG(PIIX_GPI_BD_ID1)
-#define PIIX_GPI_BD_MASK (GPIBIT(PIIX_GPI_BD_ID1) | \
- GPIBIT(PIIX_GPI_BD_ID2) | \
- GPIBIT(PIIX_GPI_BD_ID3) | \
- GPIBIT(PIIX_GPI_BD_ID4) )
-
-#define PIIX_GPI_BD_SHIFT (PIIX_GPI_BD_ID1 % 8)
-
-#define SIO_INDEX 0x2e
-#define SIO_DATA 0x2f
-
-#define SIO_DEV_SEL 0x7
-#define SIO_DEV_ENB 0x30
-#define SIO_DEV_MSB 0x60
-#define SIO_DEV_LSB 0x61
-
-#define SIO_GP_DEV 0x7
-
-#define SIO_GP_BASE SIO_GPIO_START
-#define SIO_GP_MSB (SIO_GP_BASE>>8)
-#define SIO_GP_LSB (SIO_GP_BASE&0xff)
-
-#define SIO_GP_DATA1 (SIO_GP_BASE+0)
-
-#define SIO_PM_DEV 0x8
-
-#define SIO_PM_BASE SIO_PM_START
-#define SIO_PM_MSB (SIO_PM_BASE>>8)
-#define SIO_PM_LSB (SIO_PM_BASE&0xff)
-#define SIO_PM_INDEX (SIO_PM_BASE+0)
-#define SIO_PM_DATA (SIO_PM_BASE+1)
-
-#define SIO_PM_FER2 0x1
-
-#define SIO_PM_GP_EN 0x80
-
-
-
-/*
- * This is the dev/reg where generating a config cycle will
- * result in a PCI special cycle.
- */
-#define SPECIAL_DEV 0xff
-#define SPECIAL_REG 0x00
-
-/*
- * PIIX4 needs to see a special cycle with the following data
- * to be convinced the processor has gone into the stop grant
- * state. PIIX4 insists on seeing this before it will power
- * down a system.
- */
-#define PIIX_SPECIAL_STOP 0x00120002
-
-#define PIIX4_RESET_PORT 0xcf9
-#define PIIX4_RESET_VAL 0x6
-
-#define PMSTS_PORT 0xf80 // 2 bytes PM Status
-#define PMEN_PORT 0xf82 // 2 bytes PM Enable
-#define PMCNTRL_PORT 0xf84 // 2 bytes PM Control
-
-#define PM_SUSPEND_ENABLE 0x2000 // start sequence to suspend state
-
-/*
- * PMSTS and PMEN I/O bit definitions.
- * (Bits are the same in both registers)
- */
-#define PM_STS_RSM (1<<15) // Resume Status
-#define PM_STS_PWRBTNOR (1<<11) // Power Button Override
-#define PM_STS_RTC (1<<10) // RTC status
-#define PM_STS_PWRBTN (1<<8) // Power Button Pressed?
-#define PM_STS_GBL (1<<5) // Global Status
-#define PM_STS_BM (1<<4) // Bus Master Status
-#define PM_STS_TMROF (1<<0) // Timer Overflow Status.
-
-/*
- * Stop clock GPI register
- */
-#define PIIX_GPIREG0 (0xf80 + 0x30)
-
-/*
- * Stop clock GPI bit in GPIREG0
- */
-#define PIIX_GPI_STPCLK 0x4 // STPCLK signal routed back in
-
-#endif
--- /dev/null
+#ifndef __I386_SGI_COBALT_H
+#define __I386_SGI_COBALT_H
+
+#include <asm/fixmap.h>
+
+/*
+ * Cobalt SGI Visual Workstation system ASIC
+ */
+
+#define CO_CPU_NUM_PHYS 0x1e00
+#define CO_CPU_TAB_PHYS (CO_CPU_NUM_PHYS + 2)
+
+#define CO_CPU_MAX 4
+
+#define CO_CPU_PHYS 0xc2000000
+#define CO_APIC_PHYS 0xc4000000
+
+/* see set_fixmap() and asm/fixmap.h */
+#define CO_CPU_VADDR (fix_to_virt(FIX_CO_CPU))
+#define CO_APIC_VADDR (fix_to_virt(FIX_CO_APIC))
+
+/* Cobalt CPU registers -- relative to CO_CPU_VADDR, use co_cpu_*() */
+#define CO_CPU_REV 0x08
+#define CO_CPU_CTRL 0x10
+#define CO_CPU_STAT 0x20
+#define CO_CPU_TIMEVAL 0x30
+
+/* CO_CPU_CTRL bits */
+#define CO_CTRL_TIMERUN 0x04 /* 0 == disabled */
+#define CO_CTRL_TIMEMASK 0x08 /* 0 == unmasked */
+
+/* CO_CPU_STATUS bits */
+#define CO_STAT_TIMEINTR 0x02 /* (r) 1 == int pend, (w) 0 == clear */
+
+/* CO_CPU_TIMEVAL value */
+#define CO_TIME_HZ 100000000 /* Cobalt core rate */
+
+/* Cobalt APIC registers -- relative to CO_APIC_VADDR, use co_apic_*() */
+#define CO_APIC_HI(n) (((n) * 0x10) + 4)
+#define CO_APIC_LO(n) ((n) * 0x10)
+#define CO_APIC_ID 0x0ffc
+
+/* CO_APIC_ID bits */
+#define CO_APIC_ENABLE 0x00000100
+
+/* CO_APIC_LO bits */
+#define CO_APIC_MASK 0x00010000 /* 0 = enabled */
+#define CO_APIC_LEVEL 0x00008000 /* 0 = edge */
+
+/*
+ * Where things are physically wired to Cobalt
+ * #defines with no board _<type>_<rev>_ are common to all (thus far)
+ */
+#define CO_APIC_IDE0 4
+#define CO_APIC_IDE1 2 /* Only on 320 */
+
+#define CO_APIC_8259 12 /* serial, floppy, par-l-l */
+
+/* Lithium PCI Bridge A -- "the one with 82557 Ethernet" */
+#define CO_APIC_PCIA_BASE0 0 /* and 1 */ /* slot 0, line 0 */
+#define CO_APIC_PCIA_BASE123 5 /* and 6 */ /* slot 0, line 1 */
+
+#define CO_APIC_PIIX4_USB 7 /* this one is weird */
+
+/* Lithium PCI Bridge B -- "the one with PIIX4" */
+#define CO_APIC_PCIB_BASE0 8 /* and 9-12 *//* slot 0, line 0 */
+#define CO_APIC_PCIB_BASE123 13 /* 14.15 */ /* slot 0, line 1 */
+
+#define CO_APIC_VIDOUT0 16
+#define CO_APIC_VIDOUT1 17
+#define CO_APIC_VIDIN0 18
+#define CO_APIC_VIDIN1 19
+
+#define CO_APIC_LI_AUDIO 22
+
+#define CO_APIC_AS 24
+#define CO_APIC_RE 25
+
+#define CO_APIC_CPU 28 /* Timer and Cache interrupt */
+#define CO_APIC_NMI 29
+#define CO_APIC_LAST CO_APIC_NMI
+
+/*
+ * This is how irqs are assigned on the Visual Workstation.
+ * Legacy devices get irq's 1-15 (system clock is 0 and is CO_APIC_CPU).
+ * All other devices (including PCI) go to Cobalt and are irq's 16 on up.
+ */
+#define CO_IRQ_APIC0 16 /* irq of apic entry 0 */
+#define IS_CO_APIC(irq) ((irq) >= CO_IRQ_APIC0)
+#define CO_IRQ(apic) (CO_IRQ_APIC0 + (apic)) /* apic ent to irq */
+#define CO_APIC(irq) ((irq) - CO_IRQ_APIC0) /* irq to apic ent */
+#define CO_IRQ_IDE0 14 /* knowledge of... */
+#define CO_IRQ_IDE1 15 /* ... ide driver defaults! */
+#define CO_IRQ_8259 CO_IRQ(CO_APIC_8259)
+
+#ifdef CONFIG_X86_VISWS_APIC
+static inline void co_cpu_write(unsigned long reg, unsigned long v)
+{
+ *((volatile unsigned long *)(CO_CPU_VADDR+reg))=v;
+}
+
+static inline unsigned long co_cpu_read(unsigned long reg)
+{
+ return *((volatile unsigned long *)(CO_CPU_VADDR+reg));
+}
+
+static inline void co_apic_write(unsigned long reg, unsigned long v)
+{
+ *((volatile unsigned long *)(CO_APIC_VADDR+reg))=v;
+}
+
+static inline unsigned long co_apic_read(unsigned long reg)
+{
+ return *((volatile unsigned long *)(CO_APIC_VADDR+reg));
+}
+#endif
+
+extern char visws_board_type;
+
+#define VISWS_320 0
+#define VISWS_540 1
+
+extern char visws_board_rev;
+
+#endif /* __I386_SGI_COBALT_H */
--- /dev/null
+#ifndef __I386_SGI_LITHIUM_H
+#define __I386_SGI_LITHIUM_H
+
+#include <asm/fixmap.h>
+
+/*
+ * Lithium is the SGI Visual Workstation I/O ASIC
+ */
+
+#define LI_PCI_A_PHYS 0xfc000000 /* Enet is dev 3 */
+#define LI_PCI_B_PHYS 0xfd000000 /* PIIX4 is here */
+
+/* see set_fixmap() and asm/fixmap.h */
+#define LI_PCIA_VADDR (fix_to_virt(FIX_LI_PCIA))
+#define LI_PCIB_VADDR (fix_to_virt(FIX_LI_PCIB))
+
+/* Not a standard PCI? (not in linux/pci.h) */
+#define LI_PCI_BUSNUM 0x44 /* lo8: primary, hi8: sub */
+#define LI_PCI_INTEN 0x46
+
+/* LI_PCI_INTENT bits */
+#define LI_INTA_0 0x0001
+#define LI_INTA_1 0x0002
+#define LI_INTA_2 0x0004
+#define LI_INTA_3 0x0008
+#define LI_INTA_4 0x0010
+#define LI_INTB 0x0020
+#define LI_INTC 0x0040
+#define LI_INTD 0x0080
+
+/* More special purpose macros... */
+static inline void li_pcia_write16(unsigned long reg, unsigned short v)
+{
+ *((volatile unsigned short *)(LI_PCIA_VADDR+reg))=v;
+}
+
+static inline unsigned short li_pcia_read16(unsigned long reg)
+{
+ return *((volatile unsigned short *)(LI_PCIA_VADDR+reg));
+}
+
+static inline void li_pcib_write16(unsigned long reg, unsigned short v)
+{
+ *((volatile unsigned short *)(LI_PCIB_VADDR+reg))=v;
+}
+
+static inline unsigned short li_pcib_read16(unsigned long reg)
+{
+ return *((volatile unsigned short *)(LI_PCIB_VADDR+reg));
+}
+
+#endif
+
--- /dev/null
+#ifndef __I386_SGI_PIIX_H
+#define __I386_SGI_PIIX_H
+
+/*
+ * PIIX4 as used on SGI Visual Workstations
+ */
+
+#define PIIX_PM_START 0x0F80
+
+#define SIO_GPIO_START 0x0FC0
+
+#define SIO_PM_START 0x0FC8
+
+#define PMBASE PIIX_PM_START
+#define GPIREG0 (PMBASE+0x30)
+#define GPIREG(x) (GPIREG0+((x)/8))
+#define GPIBIT(x) (1 << ((x)%8))
+
+#define PIIX_GPI_BD_ID1 18
+#define PIIX_GPI_BD_ID2 19
+#define PIIX_GPI_BD_ID3 20
+#define PIIX_GPI_BD_ID4 21
+#define PIIX_GPI_BD_REG GPIREG(PIIX_GPI_BD_ID1)
+#define PIIX_GPI_BD_MASK (GPIBIT(PIIX_GPI_BD_ID1) | \
+ GPIBIT(PIIX_GPI_BD_ID2) | \
+ GPIBIT(PIIX_GPI_BD_ID3) | \
+ GPIBIT(PIIX_GPI_BD_ID4) )
+
+#define PIIX_GPI_BD_SHIFT (PIIX_GPI_BD_ID1 % 8)
+
+#define SIO_INDEX 0x2e
+#define SIO_DATA 0x2f
+
+#define SIO_DEV_SEL 0x7
+#define SIO_DEV_ENB 0x30
+#define SIO_DEV_MSB 0x60
+#define SIO_DEV_LSB 0x61
+
+#define SIO_GP_DEV 0x7
+
+#define SIO_GP_BASE SIO_GPIO_START
+#define SIO_GP_MSB (SIO_GP_BASE>>8)
+#define SIO_GP_LSB (SIO_GP_BASE&0xff)
+
+#define SIO_GP_DATA1 (SIO_GP_BASE+0)
+
+#define SIO_PM_DEV 0x8
+
+#define SIO_PM_BASE SIO_PM_START
+#define SIO_PM_MSB (SIO_PM_BASE>>8)
+#define SIO_PM_LSB (SIO_PM_BASE&0xff)
+#define SIO_PM_INDEX (SIO_PM_BASE+0)
+#define SIO_PM_DATA (SIO_PM_BASE+1)
+
+#define SIO_PM_FER2 0x1
+
+#define SIO_PM_GP_EN 0x80
+
+
+
+/*
+ * This is the dev/reg where generating a config cycle will
+ * result in a PCI special cycle.
+ */
+#define SPECIAL_DEV 0xff
+#define SPECIAL_REG 0x00
+
+/*
+ * PIIX4 needs to see a special cycle with the following data
+ * to be convinced the processor has gone into the stop grant
+ * state. PIIX4 insists on seeing this before it will power
+ * down a system.
+ */
+#define PIIX_SPECIAL_STOP 0x00120002
+
+#define PIIX4_RESET_PORT 0xcf9
+#define PIIX4_RESET_VAL 0x6
+
+#define PMSTS_PORT 0xf80 // 2 bytes PM Status
+#define PMEN_PORT 0xf82 // 2 bytes PM Enable
+#define PMCNTRL_PORT 0xf84 // 2 bytes PM Control
+
+#define PM_SUSPEND_ENABLE 0x2000 // start sequence to suspend state
+
+/*
+ * PMSTS and PMEN I/O bit definitions.
+ * (Bits are the same in both registers)
+ */
+#define PM_STS_RSM (1<<15) // Resume Status
+#define PM_STS_PWRBTNOR (1<<11) // Power Button Override
+#define PM_STS_RTC (1<<10) // RTC status
+#define PM_STS_PWRBTN (1<<8) // Power Button Pressed?
+#define PM_STS_GBL (1<<5) // Global Status
+#define PM_STS_BM (1<<4) // Bus Master Status
+#define PM_STS_TMROF (1<<0) // Timer Overflow Status.
+
+/*
+ * Stop clock GPI register
+ */
+#define PIIX_GPIREG0 (0xf80 + 0x30)
+
+/*
+ * Stop clock GPI bit in GPIREG0
+ */
+#define PIIX_GPI_STPCLK 0x4 // STPCLK signal routed back in
+
+#endif
projects / GitHub / MotorolaMobilityLLC / kernel-slsi.git / commitdiff