shpchp: fix shpchp_wait_cmd in poll
authorKenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Fri, 22 Sep 2006 19:52:37 +0000 (12:52 -0700)
committerGreg Kroah-Hartman <gregkh@suse.de>
Wed, 18 Oct 2006 18:36:10 +0000 (11:36 -0700)
This patch fixes the problem that issuing SHPC command in poll mode
always fails with the following message.

        shpchp: Command not completed in 2000 msec

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drivers/pci/hotplug/shpchp_hpc.c

index 4d8aee11913466768cc2ae53480d2a015d234c51..446e9beff046e01548c2b2c6de61c76fe0779199 100644 (file)
@@ -302,16 +302,43 @@ static void start_int_poll_timer(struct php_ctlr_state_s *php_ctlr, int sec)
        add_timer(&php_ctlr->int_poll_timer);
 }
 
+/*
+ * Returns 1 if SHPC finishes executing a command within 1 sec,
+ * otherwise returns 0.
+ */
+static inline int shpc_poll_ctrl_busy(struct controller *ctrl)
+{
+       int i;
+       u16 cmd_status = shpc_readw(ctrl, CMD_STATUS);
+
+       if (!(cmd_status & 0x1))
+               return 1;
+
+       /* Check every 0.1 sec for a total of 1 sec */
+       for (i = 0; i < 10; i++) {
+               msleep(100);
+               cmd_status = shpc_readw(ctrl, CMD_STATUS);
+               if (!(cmd_status & 0x1))
+                       return 1;
+       }
+
+       return 0;
+}
+
 static inline int shpc_wait_cmd(struct controller *ctrl)
 {
        int retval = 0;
-       unsigned int timeout_msec = shpchp_poll_mode ? 2000 : 1000;
-       unsigned long timeout = msecs_to_jiffies(timeout_msec);
-       int rc = wait_event_interruptible_timeout(ctrl->queue,
-                                                 !ctrl->cmd_busy, timeout);
+       unsigned long timeout = msecs_to_jiffies(1000);
+       int rc;
+
+       if (shpchp_poll_mode)
+               rc = shpc_poll_ctrl_busy(ctrl);
+       else
+               rc = wait_event_interruptible_timeout(ctrl->queue,
+                                               !ctrl->cmd_busy, timeout);
        if (!rc) {
                retval = -EIO;
-               err("Command not completed in %d msec\n", timeout_msec);
+               err("Command not completed in 1000 msec\n");
        } else if (rc < 0) {
                retval = -EINTR;
                info("Command was interrupted by a signal\n");
@@ -327,26 +354,15 @@ static int shpc_write_cmd(struct slot *slot, u8 t_slot, u8 cmd)
        u16 cmd_status;
        int retval = 0;
        u16 temp_word;
-       int i;
 
        DBG_ENTER_ROUTINE 
 
        mutex_lock(&slot->ctrl->cmd_lock);
 
-       for (i = 0; i < 10; i++) {
-               cmd_status = shpc_readw(ctrl, CMD_STATUS);
-               
-               if (!(cmd_status & 0x1))
-                       break;
-               /*  Check every 0.1 sec for a total of 1 sec*/
-               msleep(100);
-       }
-
-       cmd_status = shpc_readw(ctrl, CMD_STATUS);
-       
-       if (cmd_status & 0x1) { 
+       if (!shpc_poll_ctrl_busy(ctrl)) {
                /* After 1 sec and and the controller is still busy */
-               err("%s : Controller is still busy after 1 sec.\n", __FUNCTION__);
+               err("%s : Controller is still busy after 1 sec.\n",
+                   __FUNCTION__);
                retval = -EBUSY;
                goto out;
        }