#include <asm/pci-direct.h>
#include <asm/system.h>
#include <asm/dma.h>
+#include <asm/rio.h>
#define PCI_DEVICE_ID_IBM_CALGARY 0x02a1
#define PCI_VENDOR_DEVICE_ID_CALGARY \
0xB000 /* PHB3 */
};
+/* PHB debug registers */
+
+static const unsigned long phb_debug_offsets[] = {
+ 0x4000 /* PHB 0 DEBUG */,
+ 0x5000 /* PHB 1 DEBUG */,
+ 0x6000 /* PHB 2 DEBUG */,
+ 0x7000 /* PHB 3 DEBUG */
+};
+
+/*
+ * STUFF register for each debug PHB,
+ * byte 1 = start bus number, byte 2 = end bus number
+ */
+
+#define PHB_DEBUG_STUFF_OFFSET 0x0020
+
unsigned int specified_table_size = TCE_TABLE_SIZE_UNSPECIFIED;
static int translate_empty_slots __read_mostly = 0;
static int calgary_detected __read_mostly = 0;
+static struct rio_table_hdr *rio_table_hdr __initdata;
+static struct scal_detail *scal_devs[MAX_NUMNODES] __initdata;
+static struct rio_detail *rio_devs[MAX_NUMNODES*4] __initdata;
+
struct calgary_bus_info {
void *tce_space;
unsigned char translation_disabled;
signed char phbid;
+ void __iomem *bbar;
};
static struct calgary_bus_info bus_info[MAX_PHB_BUS_NUM] = { { NULL, 0, 0 }, };
.unmap_sg = calgary_unmap_sg,
};
+static inline void __iomem * busno_to_bbar(unsigned char num)
+{
+ return bus_info[num].bbar;
+}
+
static inline int busno_to_phbid(unsigned char num)
{
return bus_info[num].phbid;
del_timer_sync(&tbl->watchdog_timer);
}
-static inline unsigned int __init locate_register_space(struct pci_dev *dev)
+static inline void __iomem * __init locate_register_space(struct pci_dev *dev)
{
- int rionodeid;
- u32 address;
-
- /*
- * Each Calgary has four busses. The first four busses (first Calgary)
- * have RIO node ID 2, then the next four (second Calgary) have RIO
- * node ID 3, the next four (third Calgary) have node ID 2 again, etc.
- * We use a gross hack - relying on the dev->bus->number ordering,
- * modulo 14 - to decide which Calgary a given bus is on. Busses 0, 1,
- * 2 and 4 are on the first Calgary (id 2), 6, 8, a and c are on the
- * second (id 3), and then it repeats modulo 14.
- */
- rionodeid = (dev->bus->number % 14 > 4) ? 3 : 2;
- /*
- * register space address calculation as follows:
- * FE0MB-8MB*OneBasedChassisNumber+1MB*(RioNodeId-ChassisBase)
- * ChassisBase is always zero for x366/x260/x460
- * RioNodeId is 2 for first Calgary, 3 for second Calgary
- */
- address = START_ADDRESS -
- (0x800000 * (ONE_BASED_CHASSIS_NUM + dev->bus->number / 14)) +
- (0x100000) * (rionodeid - CHASSIS_BASE);
- return address;
+ return busno_to_bbar(dev->bus->number);
}
static void __init calgary_init_one_nontraslated(struct pci_dev *dev)
static int __init calgary_init_one(struct pci_dev *dev)
{
- u32 address;
void __iomem *bbar;
int ret;
BUG_ON(dev->bus->number >= MAX_PHB_BUS_NUM);
- address = locate_register_space(dev);
- /* map entire 1MB of Calgary config space */
- bbar = ioremap_nocache(address, 1024 * 1024);
+ bbar = locate_register_space(dev);
if (!bbar) {
ret = -ENODATA;
goto done;
{
int ret = -ENODEV;
struct pci_dev *dev = NULL;
+ int rio, phb, bus;
+ void __iomem *bbar;
+ void __iomem *target;
+ u8 start_bus, end_bus;
+ u32 val;
+
+ for (rio = 0; rio < rio_table_hdr->num_rio_dev; rio++) {
+
+ if ( (rio_devs[rio]->type != COMPAT_CALGARY) &&
+ (rio_devs[rio]->type != ALT_CALGARY) )
+ continue;
+
+ /* map entire 1MB of Calgary config space */
+ bbar = ioremap_nocache(rio_devs[rio]->BBAR, 1024 * 1024);
+
+ for (phb = 0; phb < PHBS_PER_CALGARY; phb++) {
+
+ target = calgary_reg(bbar, phb_debug_offsets[phb] |
+ PHB_DEBUG_STUFF_OFFSET);
+ val = be32_to_cpu(readl(target));
+ start_bus = (u8)((val & 0x00FF0000) >> 16);
+ end_bus = (u8)((val & 0x0000FF00) >> 8);
+ for (bus = start_bus; bus <= end_bus; bus++) {
+ bus_info[bus].bbar = bbar;
+ bus_info[bus].phbid = phb;
+ }
+ }
+ }
+
do {
dev = pci_get_device(PCI_VENDOR_ID_IBM,
return ret;
}
+static int __init build_detail_arrays(void)
+{
+ unsigned long ptr;
+ int i, scal_detail_size, rio_detail_size;
+
+ if (rio_table_hdr->num_scal_dev > MAX_NUMNODES){
+ printk(KERN_WARNING
+ "Calgary: MAX_NUMNODES too low! Defined as %d, "
+ "but system has %d nodes.\n",
+ MAX_NUMNODES, rio_table_hdr->num_scal_dev);
+ return -ENODEV;
+ }
+
+ switch (rio_table_hdr->version){
+ default:
+ printk(KERN_WARNING
+ "Calgary: Invalid Rio Grande Table Version: %d\n",
+ rio_table_hdr->version);
+ return -ENODEV;
+ case 2:
+ scal_detail_size = 11;
+ rio_detail_size = 13;
+ break;
+ case 3:
+ scal_detail_size = 12;
+ rio_detail_size = 15;
+ break;
+ }
+
+ ptr = ((unsigned long)rio_table_hdr) + 3;
+ for (i = 0; i < rio_table_hdr->num_scal_dev;
+ i++, ptr += scal_detail_size)
+ scal_devs[i] = (struct scal_detail *)ptr;
+
+ for (i = 0; i < rio_table_hdr->num_rio_dev;
+ i++, ptr += rio_detail_size)
+ rio_devs[i] = (struct rio_detail *)ptr;
+
+ return 0;
+}
+
void __init detect_calgary(void)
{
u32 val;
int bus;
void *tbl;
int calgary_found = 0;
- int phb = -1;
+ unsigned long ptr;
+ int offset;
/*
* if the user specified iommu=off or iommu=soft or we found
if (!early_pci_allowed())
return;
+ ptr = (unsigned long)phys_to_virt(get_bios_ebda());
+
+ rio_table_hdr = NULL;
+ offset = 0x180;
+ while (offset) {
+ /* The block id is stored in the 2nd word */
+ if (*((unsigned short *)(ptr + offset + 2)) == 0x4752){
+ /* set the pointer past the offset & block id */
+ rio_table_hdr = (struct rio_table_hdr *)(ptr+offset+4);
+ break;
+ }
+ /* The next offset is stored in the 1st word. 0 means no more */
+ offset = *((unsigned short *)(ptr + offset));
+ }
+ if (!rio_table_hdr){
+ printk(KERN_ERR "Calgary: Unable to locate "
+ "Rio Grande Table in EBDA - bailing!\n");
+ return;
+ }
+
+ if (build_detail_arrays())
+ return;
+
specified_table_size = determine_tce_table_size(end_pfn * PAGE_SIZE);
for (bus = 0; bus < MAX_PHB_BUS_NUM; bus++) {
if (read_pci_config(bus, 0, 0, 0) != PCI_VENDOR_DEVICE_ID_CALGARY)
continue;
- /*
- * There are 4 PHBs per Calgary chip. Set phb to which phb (0-3)
- * it is connected to releative to the clagary chip.
- */
- phb = (phb + 1) % PHBS_PER_CALGARY;
-
if (info->translation_disabled)
continue;
if (!tbl)
goto cleanup;
info->tce_space = tbl;
- info->phbid = phb;
calgary_found = 1;
break;
}
--- /dev/null
+/*
+ * Derived from include/asm-i386/mach-summit/mach_mpparse.h
+ * and include/asm-i386/mach-default/bios_ebda.h
+ *
+ * Author: Laurent Vivier <Laurent.Vivier@bull.net>
+ *
+ */
+
+#ifndef __ASM_RIO_H
+#define __ASM_RIO_H
+
+#define RIO_TABLE_VERSION 3
+
+struct rio_table_hdr {
+ u8 version; /* Version number of this data structure */
+ u8 num_scal_dev; /* # of Scalability devices */
+ u8 num_rio_dev; /* # of RIO I/O devices */
+} __attribute__((packed));
+
+struct scal_detail {
+ u8 node_id; /* Scalability Node ID */
+ u32 CBAR; /* Address of 1MB register space */
+ u8 port0node; /* Node ID port connected to: 0xFF=None */
+ u8 port0port; /* Port num port connected to: 0,1,2, or */
+ /* 0xFF=None */
+ u8 port1node; /* Node ID port connected to: 0xFF = None */
+ u8 port1port; /* Port num port connected to: 0,1,2, or */
+ /* 0xFF=None */
+ u8 port2node; /* Node ID port connected to: 0xFF = None */
+ u8 port2port; /* Port num port connected to: 0,1,2, or */
+ /* 0xFF=None */
+ u8 chassis_num; /* 1 based Chassis number (1 = boot node) */
+} __attribute__((packed));
+
+struct rio_detail {
+ u8 node_id; /* RIO Node ID */
+ u32 BBAR; /* Address of 1MB register space */
+ u8 type; /* Type of device */
+ u8 owner_id; /* Node ID of Hurricane that owns this */
+ /* node */
+ u8 port0node; /* Node ID port connected to: 0xFF=None */
+ u8 port0port; /* Port num port connected to: 0,1,2, or */
+ /* 0xFF=None */
+ u8 port1node; /* Node ID port connected to: 0xFF=None */
+ u8 port1port; /* Port num port connected to: 0,1,2, or */
+ /* 0xFF=None */
+ u8 first_slot; /* Lowest slot number below this Calgary */
+ u8 status; /* Bit 0 = 1 : the XAPIC is used */
+ /* = 0 : the XAPIC is not used, ie: */
+ /* ints fwded to another XAPIC */
+ /* Bits1:7 Reserved */
+ u8 WP_index; /* instance index - lower ones have */
+ /* lower slot numbers/PCI bus numbers */
+ u8 chassis_num; /* 1 based Chassis number */
+} __attribute__((packed));
+
+enum {
+ HURR_SCALABILTY = 0, /* Hurricane Scalability info */
+ HURR_RIOIB = 2, /* Hurricane RIOIB info */
+ COMPAT_CALGARY = 4, /* Compatibility Calgary */
+ ALT_CALGARY = 5, /* Second Planar Calgary */
+};
+
+/*
+ * there is a real-mode segmented pointer pointing to the
+ * 4K EBDA area at 0x40E.
+ */
+
+static inline unsigned long get_bios_ebda(void)
+{
+ unsigned long address= *(unsigned short *)phys_to_virt(0x40Eul);
+ address <<= 4;
+ return address;
+}
+
+#endif /* __ASM_RIO_H */
projects / GitHub / LineageOS / android_kernel_motorola_exynos9610.git / commitdiff