libata-acpi: filter out DIPM enable
authorTejun Heo <tj@kernel.org>
Sun, 6 Jul 2008 14:15:03 +0000 (23:15 +0900)
committerJeff Garzik <jgarzik@redhat.com>
Fri, 11 Jul 2008 13:38:23 +0000 (09:38 -0400)
Some BIOSen enable DIPM via _GTF which causes command timeouts under
certain configuration.  This didn't occur on 2.6.25 because 2.6.25
defaulted to SRST, so _GTF wasn't executed during boot probe, so ahci
host reset disabled DIPM and as _GTF wasn't executed after SRST, DIPM
wasn't enabled.  On 2.6.26, hardreset is used during probe and after
probe _GTF is executed enabling DIPM and thus the failures.

This patch could theoretically disable DIPM on machines which used to
have it enabled on 2.6.25 but AFAIK ahci is currently the only driver
which uses SATA ACPI hierarchy (_SDD) and as the host reset would have
always disabled DIPM, this shouldn't happen.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
drivers/ata/libata-acpi.c

index 3ff8b14420d9bad5c2de548dd5edee8e730537e0..abea74b42a20b9dce487971dbe859e70b93da505 100644 (file)
 enum {
        ATA_ACPI_FILTER_SETXFER = 1 << 0,
        ATA_ACPI_FILTER_LOCK    = 1 << 1,
+       ATA_ACPI_FILTER_DIPM    = 1 << 2,
 
        ATA_ACPI_FILTER_DEFAULT = ATA_ACPI_FILTER_SETXFER |
-                                 ATA_ACPI_FILTER_LOCK,
+                                 ATA_ACPI_FILTER_LOCK |
+                                 ATA_ACPI_FILTER_DIPM,
 };
 
 static unsigned int ata_acpi_gtf_filter = ATA_ACPI_FILTER_DEFAULT;
 module_param_named(acpi_gtf_filter, ata_acpi_gtf_filter, int, 0644);
-MODULE_PARM_DESC(acpi_gtf_filter, "filter mask for ACPI _GTF commands, set to filter out (0x1=set xfermode, 0x2=lock/freeze lock)");
+MODULE_PARM_DESC(acpi_gtf_filter, "filter mask for ACPI _GTF commands, set to filter out (0x1=set xfermode, 0x2=lock/freeze lock, 0x4=DIPM)");
 
 #define NO_PORT_MULT           0xffff
 #define SATA_ADR(root, pmp)    (((root) << 16) | (pmp))
@@ -690,6 +692,14 @@ static int ata_acpi_filter_tf(const struct ata_taskfile *tf,
                        return 1;
        }
 
+       if (ata_acpi_gtf_filter & ATA_ACPI_FILTER_DIPM) {
+               /* inhibit enabling DIPM */
+               if (tf->command == ATA_CMD_SET_FEATURES &&
+                   tf->feature == SETFEATURES_SATA_ENABLE &&
+                   tf->nsect == SATA_DIPM)
+                       return 1;
+       }
+
        return 0;
 }