- "samsung,exynos4210-usb2-phy"
- "samsung,exynos4x12-usb2-phy"
- "samsung,exynos5250-usb2-phy"
++ - "samsung,s5pv210-usb2-phy"
- reg : a list of registers used by phy driver
- first and obligatory is the location of phy modules registers
- samsung,sysreg-phandle - handle to syscon used to control the system registers
F: arch/arm/boot/dts/bcm5301x.dtsi
F: arch/arm/boot/dts/bcm470*
+ BROADCOM BCM7XXX ARM ARCHITECTURE
+ M: Marc Carino <marc.ceeeee@gmail.com>
+ M: Brian Norris <computersforpeace@gmail.com>
+ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+ S: Maintained
+ F: arch/arm/mach-bcm/*brcmstb*
+ F: arch/arm/boot/dts/bcm7*.dts*
+
BROADCOM TG3 GIGABIT ETHERNET DRIVER
-M: Nithin Nayak Sujir <nsujir@broadcom.com>
+M: Prashant Sreedharan <prashant@broadcom.com>
M: Michael Chan <mchan@broadcom.com>
L: netdev@vger.kernel.org
S: Supported
/* Setting SEQ_OPTION register */
tmp = (S5P_USE_STANDBY_WFI0 | S5P_USE_STANDBY_WFE0);
- __raw_writel(tmp, S5P_CENTRAL_SEQ_OPTION);
+ pmu_raw_writel(tmp, S5P_CENTRAL_SEQ_OPTION);
- if (read_cpuid_part_number() == ARM_CPU_PART_CORTEX_A9)
+ if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9)
exynos_cpu_save_register();
return 0;
#include <linux/amba/bus.h>
#include <linux/amba/kmi.h>
#include <linux/amba/clcd.h>
+#include <linux/platform_data/video-clcd-versatile.h>
#include <linux/amba/mmci.h>
#include <linux/io.h>
- #include <linux/irqchip/versatile-fpga.h>
+ #include <linux/irqchip.h>
#include <linux/gfp.h>
#include <linux/mtd/physmap.h>
#include <linux/of_irq.h>
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
- #include <linux/linkage.h>
#include <linux/init.h>
+ #include <linux/linkage.h>
+ #include <linux/threads.h>
+#include <asm/assembler.h>
#include <asm/memory.h>
+ #ifdef CONFIG_SMP
ENTRY(shmobile_invalidate_start)
bl v7_invalidate_l1
b secondary_startup
#
# ARM CPU Idle drivers
#
- config ARM_ARMADA_370_XP_CPUIDLE
- bool "CPU Idle Driver for Armada 370/XP family processors"
- depends on ARCH_MVEBU
- help
- Select this to enable cpuidle on Armada 370/XP processors.
-
config ARM_BIG_LITTLE_CPUIDLE
bool "Support for ARM big.LITTLE processors"
- depends on ARCH_VEXPRESS_TC2_PM
+ depends on ARCH_VEXPRESS_TC2_PM || ARCH_EXYNOS
+ depends on MCPM
select ARM_CPU_SUSPEND
select CPU_IDLE_MULTIPLE_DRIVERS
help
config PHY_SAMSUNG_USB2
tristate "Samsung USB 2.0 PHY driver"
depends on HAS_IOMEM
+ depends on USB_EHCI_EXYNOS || USB_OHCI_EXYNOS || USB_DWC2
select GENERIC_PHY
select MFD_SYSCON
+ default ARCH_EXYNOS
help
Enable this to support the Samsung USB 2.0 PHY driver for Samsung
- SoCs. This driver provides the interface for USB 2.0 PHY. Support for
- particular SoCs has to be enabled in addition to this driver. Number
- and type of supported phys depends on the SoC.
+ SoCs. This driver provides the interface for USB 2.0 PHY. Support
+ for particular PHYs will be enabled based on the SoC type in addition
+ to this driver.
+ config PHY_S5PV210_USB2
+ bool "Support for S5PV210"
+ depends on PHY_SAMSUNG_USB2
+ depends on ARCH_S5PV210
+ help
+ Enable USB PHY support for S5PV210. This option requires that Samsung
+ USB 2.0 PHY driver is enabled and means that support for this
+ particular SoC is compiled in the driver. In case of S5PV210 two phys
+ are available - device and host.
+
config PHY_EXYNOS4210_USB2
- bool "Support for Exynos 4210"
+ bool
depends on PHY_SAMSUNG_USB2
- depends on CPU_EXYNOS4210
- help
- Enable USB PHY support for Exynos 4210. This option requires that
- Samsung USB 2.0 PHY driver is enabled and means that support for this
- particular SoC is compiled in the driver. In case of Exynos 4210 four
- phys are available - device, host, HSIC0 and HSIC1.
+ default CPU_EXYNOS4210
config PHY_EXYNOS4X12_USB2
- bool "Support for Exynos 4x12"
+ bool
depends on PHY_SAMSUNG_USB2
- depends on (SOC_EXYNOS4212 || SOC_EXYNOS4412)
- help
- Enable USB PHY support for Exynos 4x12. This option requires that
- Samsung USB 2.0 PHY driver is enabled and means that support for this
- particular SoC is compiled in the driver. In case of Exynos 4x12 four
- phys are available - device, host, HSIC0 and HSIC1.
+ default SOC_EXYNOS3250 || SOC_EXYNOS4212 || SOC_EXYNOS4412
config PHY_EXYNOS5250_USB2
- bool "Support for Exynos 5250"
+ bool
depends on PHY_SAMSUNG_USB2
- depends on SOC_EXYNOS5250
- help
- Enable USB PHY support for Exynos 5250. This option requires that
- Samsung USB 2.0 PHY driver is enabled and means that support for this
- particular SoC is compiled in the driver. In case of Exynos 5250 four
- phys are available - device, host, HSIC0 and HSIC.
+ default SOC_EXYNOS5250 || SOC_EXYNOS5420
config PHY_EXYNOS5_USBDRD
tristate "Exynos5 SoC series USB DRD PHY driver"
phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4210_USB2) += phy-exynos4210-usb2.o
phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4X12_USB2) += phy-exynos4x12-usb2.o
phy-exynos-usb2-$(CONFIG_PHY_EXYNOS5250_USB2) += phy-exynos5250-usb2.o
+ phy-exynos-usb2-$(CONFIG_PHY_S5PV210_USB2) += phy-s5pv210-usb2.o
obj-$(CONFIG_PHY_EXYNOS5_USBDRD) += phy-exynos5-usbdrd.o
obj-$(CONFIG_PHY_XGENE) += phy-xgene.o
+obj-$(CONFIG_PHY_QCOM_APQ8064_SATA) += phy-qcom-apq8064-sata.o
+obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA) += phy-qcom-ipq806x-sata.o
.compatible = "samsung,exynos5250-usb2-phy",
.data = &exynos5250_usb2_phy_config,
},
++#endif
++#ifdef CONFIG_PHY_S5PV210_USB2
++ {
++ .compatible = "samsung,s5pv210-usb2-phy",
++ .data = &s5pv210_usb2_phy_config,
++ },
#endif
{ },
};
extern const struct samsung_usb2_phy_config exynos4210_usb2_phy_config;
extern const struct samsung_usb2_phy_config exynos4x12_usb2_phy_config;
extern const struct samsung_usb2_phy_config exynos5250_usb2_phy_config;
++extern const struct samsung_usb2_phy_config s5pv210_usb2_phy_config;
#endif
obj-$(CONFIG_POWER_RESET_AS3722) += as3722-poweroff.o
obj-$(CONFIG_POWER_RESET_AXXIA) += axxia-reset.o
+obj-$(CONFIG_POWER_RESET_BRCMSTB) += brcmstb-reboot.o
obj-$(CONFIG_POWER_RESET_GPIO) += gpio-poweroff.o
+ obj-$(CONFIG_POWER_RESET_HISI) += hisi-reboot.o
obj-$(CONFIG_POWER_RESET_MSM) += msm-poweroff.o
obj-$(CONFIG_POWER_RESET_QNAP) += qnap-poweroff.o
obj-$(CONFIG_POWER_RESET_RESTART) += restart-poweroff.o
projects / GitHub / LineageOS / G12 / android_kernel_amlogic_linux-4.9.git / commitdiff