#include <linux/slab.h>
#include <media/ir-common.h>
-#define IR_TAB_MIN_SIZE 32
-#define IR_TAB_MAX_SIZE 1024
+/* Sizes are in bytes, 256 bytes allows for 32 entries on x64 */
+#define IR_TAB_MIN_SIZE 256
+#define IR_TAB_MAX_SIZE 8192
/**
- * ir_seek_table() - returns the element order on the table
- * @rc_tab: the ir_scancode_table with the keymap to be used
- * @scancode: the scancode that we're seeking
+ * ir_resize_table() - resizes a scancode table if necessary
+ * @rc_tab: the ir_scancode_table to resize
+ * @return: zero on success or a negative error code
*
- * This routine is used by the input routines when a key is pressed at the
- * IR. The scancode is received and needs to be converted into a keycode.
- * If the key is not found, it returns KEY_UNKNOWN. Otherwise, returns the
- * corresponding keycode from the table.
+ * This routine will shrink the ir_scancode_table if it has lots of
+ * unused entries and grow it if it is full.
*/
-static int ir_seek_table(struct ir_scancode_table *rc_tab, u32 scancode)
+static int ir_resize_table(struct ir_scancode_table *rc_tab)
{
- int rc;
- unsigned long flags;
- struct ir_scancode *keymap = rc_tab->scan;
+ unsigned int oldalloc = rc_tab->alloc;
+ unsigned int newalloc = oldalloc;
+ struct ir_scancode *oldscan = rc_tab->scan;
+ struct ir_scancode *newscan;
+
+ if (rc_tab->size == rc_tab->len) {
+ /* All entries in use -> grow keytable */
+ if (rc_tab->alloc >= IR_TAB_MAX_SIZE)
+ return -ENOMEM;
- spin_lock_irqsave(&rc_tab->lock, flags);
+ newalloc *= 2;
+ IR_dprintk(1, "Growing table to %u bytes\n", newalloc);
+ }
- /* FIXME: replace it by a binary search */
+ if ((rc_tab->len * 3 < rc_tab->size) && (oldalloc > IR_TAB_MIN_SIZE)) {
+ /* Less than 1/3 of entries in use -> shrink keytable */
+ newalloc /= 2;
+ IR_dprintk(1, "Shrinking table to %u bytes\n", newalloc);
+ }
- for (rc = 0; rc < rc_tab->size; rc++)
- if (keymap[rc].scancode == scancode)
- goto exit;
+ if (newalloc == oldalloc)
+ return 0;
- /* Not found */
- rc = -EINVAL;
+ newscan = kmalloc(newalloc, GFP_ATOMIC);
+ if (!newscan) {
+ IR_dprintk(1, "Failed to kmalloc %u bytes\n", newalloc);
+ return -ENOMEM;
+ }
-exit:
- spin_unlock_irqrestore(&rc_tab->lock, flags);
- return rc;
+ memcpy(newscan, rc_tab->scan, rc_tab->len * sizeof(struct ir_scancode));
+ rc_tab->scan = newscan;
+ rc_tab->alloc = newalloc;
+ rc_tab->size = rc_tab->alloc / sizeof(struct ir_scancode);
+ kfree(oldscan);
+ return 0;
}
/**
- * ir_roundup_tablesize() - gets an optimum value for the table size
- * @n_elems: minimum number of entries to store keycodes
- *
- * This routine is used to choose the keycode table size.
+ * ir_do_setkeycode() - internal function to set a keycode in the
+ * scancode->keycode table
+ * @dev: the struct input_dev device descriptor
+ * @rc_tab: the struct ir_scancode_table to set the keycode in
+ * @scancode: the scancode for the ir command
+ * @keycode: the keycode for the ir command
+ * @return: -EINVAL if the keycode could not be inserted, otherwise zero.
*
- * In order to have some empty space for new keycodes,
- * and knowing in advance that kmalloc allocates only power of two
- * segments, it optimizes the allocated space to have some spare space
- * for those new keycodes by using the maximum number of entries that
- * will be effectively be allocated by kmalloc.
- * In order to reduce the quantity of table resizes, it has a minimum
- * table size of IR_TAB_MIN_SIZE.
+ * This routine is used internally to manipulate the scancode->keycode table.
+ * The caller has to hold @rc_tab->lock.
*/
-static int ir_roundup_tablesize(int n_elems)
+static int ir_do_setkeycode(struct input_dev *dev,
+ struct ir_scancode_table *rc_tab,
+ unsigned scancode, unsigned keycode)
{
- size_t size;
+ unsigned int i;
+ int old_keycode = KEY_RESERVED;
+
+ /* First check if we already have a mapping for this ir command */
+ for (i = 0; i < rc_tab->len; i++) {
+ /* Keytable is sorted from lowest to highest scancode */
+ if (rc_tab->scan[i].scancode > scancode)
+ break;
+ else if (rc_tab->scan[i].scancode < scancode)
+ continue;
- if (n_elems < IR_TAB_MIN_SIZE)
- n_elems = IR_TAB_MIN_SIZE;
+ old_keycode = rc_tab->scan[i].keycode;
+ rc_tab->scan[i].keycode = keycode;
- /*
- * As kmalloc only allocates sizes of power of two, get as
- * much entries as possible for the allocated memory segment
- */
- size = roundup_pow_of_two(n_elems * sizeof(struct ir_scancode));
- n_elems = size / sizeof(struct ir_scancode);
+ /* Did the user wish to remove the mapping? */
+ if (keycode == KEY_RESERVED || keycode == KEY_UNKNOWN) {
+ rc_tab->len--;
+ memmove(&rc_tab->scan[i], &rc_tab->scan[i + 1],
+ (rc_tab->len - i) * sizeof(struct ir_scancode));
+ }
- return n_elems;
-}
-
-/**
- * ir_copy_table() - copies a keytable, discarding the unused entries
- * @destin: destin table
- * @origin: origin table
- *
- * Copies all entries where the keycode is not KEY_UNKNOWN/KEY_RESERVED
- * Also copies table size and table protocol.
- * NOTE: It shouldn't copy the lock field
- */
-
-static int ir_copy_table(struct ir_scancode_table *destin,
- const struct ir_scancode_table *origin)
-{
- int i, j = 0;
+ /* Possibly shrink the keytable, failure is not a problem */
+ ir_resize_table(rc_tab);
+ break;
+ }
- for (i = 0; i < origin->size; i++) {
- if (origin->scan[i].keycode == KEY_UNKNOWN ||
- origin->scan[i].keycode == KEY_RESERVED)
- continue;
+ if (old_keycode == KEY_RESERVED) {
+ /* No previous mapping found, we might need to grow the table */
+ if (ir_resize_table(rc_tab))
+ return -ENOMEM;
- memcpy(&destin->scan[j], &origin->scan[i], sizeof(struct ir_scancode));
- j++;
+ /* i is the proper index to insert our new keycode */
+ memmove(&rc_tab->scan[i + 1], &rc_tab->scan[i],
+ (rc_tab->len - i) * sizeof(struct ir_scancode));
+ rc_tab->scan[i].scancode = scancode;
+ rc_tab->scan[i].keycode = keycode;
+ rc_tab->len++;
+ set_bit(keycode, dev->keybit);
+ } else {
+ /* A previous mapping was updated... */
+ clear_bit(old_keycode, dev->keybit);
+ /* ...but another scancode might use the same keycode */
+ for (i = 0; i < rc_tab->len; i++) {
+ if (rc_tab->scan[i].keycode == old_keycode) {
+ set_bit(old_keycode, dev->keybit);
+ break;
+ }
+ }
}
- destin->size = j;
- destin->ir_type = origin->ir_type;
-
- IR_dprintk(1, "Copied %d scancodes to the new keycode table\n", destin->size);
return 0;
}
/**
- * ir_getkeycode() - get a keycode at the evdev scancode ->keycode table
+ * ir_setkeycode() - set a keycode in the scancode->keycode table
* @dev: the struct input_dev device descriptor
* @scancode: the desired scancode
- * @keycode: the keycode to be retorned.
+ * @keycode: result
+ * @return: -EINVAL if the keycode could not be inserted, otherwise zero.
*
- * This routine is used to handle evdev EVIOCGKEY ioctl.
- * If the key is not found, returns -EINVAL, otherwise, returns 0.
+ * This routine is used to handle evdev EVIOCSKEY ioctl.
*/
-static int ir_getkeycode(struct input_dev *dev,
- unsigned int scancode, unsigned int *keycode)
+static int ir_setkeycode(struct input_dev *dev,
+ unsigned int scancode, unsigned int keycode)
{
- int elem;
+ int rc;
+ unsigned long flags;
struct ir_input_dev *ir_dev = input_get_drvdata(dev);
struct ir_scancode_table *rc_tab = &ir_dev->rc_tab;
- elem = ir_seek_table(rc_tab, scancode);
- if (elem >= 0) {
- *keycode = rc_tab->scan[elem].keycode;
- return 0;
- }
-
- /*
- * Scancode not found and table can't be expanded
- */
- if (elem < 0 && rc_tab->size == IR_TAB_MAX_SIZE)
- return -EINVAL;
-
- /*
- * If is there extra space, returns KEY_RESERVED,
- * otherwise, input core won't let ir_setkeycode to work
- */
- *keycode = KEY_RESERVED;
- return 0;
-}
-
-/**
- * ir_is_resize_needed() - Check if the table needs rezise
- * @table: keycode table that may need to resize
- * @n_elems: minimum number of entries to store keycodes
- *
- * Considering that kmalloc uses power of two storage areas, this
- * routine detects if the real alloced size will change. If not, it
- * just returns without doing nothing. Otherwise, it will extend or
- * reduce the table size to meet the new needs.
- *
- * It returns 0 if no resize is needed, 1 otherwise.
- */
-static int ir_is_resize_needed(struct ir_scancode_table *table, int n_elems)
-{
- int cur_size = ir_roundup_tablesize(table->size);
- int new_size = ir_roundup_tablesize(n_elems);
-
- if (cur_size == new_size)
- return 0;
-
- /* Resize is needed */
- return 1;
-}
-
-/**
- * ir_delete_key() - remove a keycode from the table
- * @rc_tab: keycode table
- * @elem: element to be removed
- *
- */
-static void ir_delete_key(struct ir_scancode_table *rc_tab, int elem)
-{
- unsigned long flags = 0;
- int newsize = rc_tab->size - 1;
- int resize = ir_is_resize_needed(rc_tab, newsize);
- struct ir_scancode *oldkeymap = rc_tab->scan;
- struct ir_scancode *newkeymap = NULL;
-
- if (resize)
- newkeymap = kzalloc(ir_roundup_tablesize(newsize) *
- sizeof(*newkeymap), GFP_ATOMIC);
-
- /* There's no memory for resize. Keep the old table */
- if (!resize || !newkeymap) {
- newkeymap = oldkeymap;
-
- /* We'll modify the live table. Lock it */
- spin_lock_irqsave(&rc_tab->lock, flags);
- }
-
- /*
- * Copy the elements before the one that will be deleted
- * if (!resize), both oldkeymap and newkeymap points
- * to the same place, so, there's no need to copy
- */
- if (resize && elem > 0)
- memcpy(newkeymap, oldkeymap,
- elem * sizeof(*newkeymap));
-
- /*
- * Copy the other elements overwriting the element to be removed
- * This operation applies to both resize and non-resize case
- */
- if (elem < newsize)
- memcpy(&newkeymap[elem], &oldkeymap[elem + 1],
- (newsize - elem) * sizeof(*newkeymap));
-
- if (resize) {
- /*
- * As the copy happened to a temporary table, only here
- * it needs to lock while replacing the table pointers
- * to use the new table
- */
- spin_lock_irqsave(&rc_tab->lock, flags);
- rc_tab->size = newsize;
- rc_tab->scan = newkeymap;
- spin_unlock_irqrestore(&rc_tab->lock, flags);
-
- /* Frees the old keytable */
- kfree(oldkeymap);
- } else {
- rc_tab->size = newsize;
- spin_unlock_irqrestore(&rc_tab->lock, flags);
- }
+ spin_lock_irqsave(&rc_tab->lock, flags);
+ rc = ir_do_setkeycode(dev, rc_tab, scancode, keycode);
+ spin_unlock_irqrestore(&rc_tab->lock, flags);
+ return rc;
}
/**
- * ir_insert_key() - insert a keycode at the table
- * @rc_tab: keycode table
- * @scancode: the desired scancode
- * @keycode: the keycode to be retorned.
+ * ir_setkeytable() - sets several entries in the scancode->keycode table
+ * @dev: the struct input_dev device descriptor
+ * @to: the struct ir_scancode_table to copy entries to
+ * @from: the struct ir_scancode_table to copy entries from
+ * @return: -EINVAL if all keycodes could not be inserted, otherwise zero.
*
+ * This routine is used to handle table initialization.
*/
-static int ir_insert_key(struct ir_scancode_table *rc_tab,
- int scancode, int keycode)
+static int ir_setkeytable(struct input_dev *dev,
+ struct ir_scancode_table *to,
+ const struct ir_scancode_table *from)
{
+ struct ir_input_dev *ir_dev = input_get_drvdata(dev);
+ struct ir_scancode_table *rc_tab = &ir_dev->rc_tab;
unsigned long flags;
- int elem = rc_tab->size;
- int newsize = rc_tab->size + 1;
- int resize = ir_is_resize_needed(rc_tab, newsize);
- struct ir_scancode *oldkeymap = rc_tab->scan;
- struct ir_scancode *newkeymap;
-
- if (resize) {
- newkeymap = kzalloc(ir_roundup_tablesize(newsize) *
- sizeof(*newkeymap), GFP_ATOMIC);
- if (!newkeymap)
- return -ENOMEM;
-
- memcpy(newkeymap, oldkeymap,
- rc_tab->size * sizeof(*newkeymap));
- } else
- newkeymap = oldkeymap;
-
- /* Stores the new code at the table */
- IR_dprintk(1, "#%d: New scan 0x%04x with key 0x%04x\n",
- rc_tab->size, scancode, keycode);
+ unsigned int i;
+ int rc = 0;
spin_lock_irqsave(&rc_tab->lock, flags);
- rc_tab->size = newsize;
- if (resize) {
- rc_tab->scan = newkeymap;
- kfree(oldkeymap);
+ for (i = 0; i < from->size; i++) {
+ rc = ir_do_setkeycode(dev, to, from->scan[i].scancode,
+ from->scan[i].keycode);
+ if (rc)
+ break;
}
- newkeymap[elem].scancode = scancode;
- newkeymap[elem].keycode = keycode;
spin_unlock_irqrestore(&rc_tab->lock, flags);
-
- return 0;
+ return rc;
}
/**
- * ir_setkeycode() - set a keycode at the evdev scancode ->keycode table
+ * ir_getkeycode() - get a keycode from the scancode->keycode table
* @dev: the struct input_dev device descriptor
* @scancode: the desired scancode
- * @keycode: the keycode to be retorned.
+ * @keycode: used to return the keycode, if found, or KEY_RESERVED
+ * @return: always returns zero.
*
- * This routine is used to handle evdev EVIOCSKEY ioctl.
- * There's one caveat here: how can we increase the size of the table?
- * If the key is not found, returns -EINVAL, otherwise, returns 0.
+ * This routine is used to handle evdev EVIOCGKEY ioctl.
*/
-static int ir_setkeycode(struct input_dev *dev,
- unsigned int scancode, unsigned int keycode)
+static int ir_getkeycode(struct input_dev *dev,
+ unsigned int scancode, unsigned int *keycode)
{
- int rc = 0;
+ int start, end, mid;
+ unsigned long flags;
+ int key = KEY_RESERVED;
struct ir_input_dev *ir_dev = input_get_drvdata(dev);
struct ir_scancode_table *rc_tab = &ir_dev->rc_tab;
- struct ir_scancode *keymap = rc_tab->scan;
- unsigned long flags;
-
- /*
- * Handle keycode table deletions
- *
- * If userspace is adding a KEY_UNKNOWN or KEY_RESERVED,
- * deal as a trial to remove an existing scancode attribution
- * if table become too big, reduce it to save space
- */
- if (keycode == KEY_UNKNOWN || keycode == KEY_RESERVED) {
- rc = ir_seek_table(rc_tab, scancode);
- if (rc < 0)
- return 0;
-
- IR_dprintk(1, "#%d: Deleting scan 0x%04x\n", rc, scancode);
- clear_bit(keymap[rc].keycode, dev->keybit);
- ir_delete_key(rc_tab, rc);
-
- return 0;
- }
-
- /*
- * Handle keycode replacements
- *
- * If the scancode exists, just replace by the new value
- */
- rc = ir_seek_table(rc_tab, scancode);
- if (rc >= 0) {
- IR_dprintk(1, "#%d: Replacing scan 0x%04x with key 0x%04x\n",
- rc, scancode, keycode);
- clear_bit(keymap[rc].keycode, dev->keybit);
-
- spin_lock_irqsave(&rc_tab->lock, flags);
- keymap[rc].keycode = keycode;
- spin_unlock_irqrestore(&rc_tab->lock, flags);
-
- set_bit(keycode, dev->keybit);
-
- return 0;
+ spin_lock_irqsave(&rc_tab->lock, flags);
+ start = 0;
+ end = rc_tab->len - 1;
+ while (start <= end) {
+ mid = (start + end) / 2;
+ if (rc_tab->scan[mid].scancode < scancode)
+ start = mid + 1;
+ else if (rc_tab->scan[mid].scancode > scancode)
+ end = mid - 1;
+ else {
+ key = rc_tab->scan[mid].keycode;
+ break;
+ }
}
+ spin_unlock_irqrestore(&rc_tab->lock, flags);
- /*
- * Handle new scancode inserts
- *
- * reallocate table if needed and insert a new keycode
- */
-
- /* Avoid growing the table indefinitely */
- if (rc_tab->size + 1 > IR_TAB_MAX_SIZE)
- return -EINVAL;
-
- rc = ir_insert_key(rc_tab, scancode, keycode);
- if (rc < 0)
- return rc;
- set_bit(keycode, dev->keybit);
-
+ *keycode = key;
return 0;
}
*/
u32 ir_g_keycode_from_table(struct input_dev *dev, u32 scancode)
{
- struct ir_input_dev *ir_dev = input_get_drvdata(dev);
- struct ir_scancode_table *rc_tab = &ir_dev->rc_tab;
- struct ir_scancode *keymap = rc_tab->scan;
- int elem;
-
- elem = ir_seek_table(rc_tab, scancode);
- if (elem >= 0) {
- IR_dprintk(1, "%s: scancode 0x%04x keycode 0x%02x\n",
- dev->name, scancode, keymap[elem].keycode);
-
- return rc_tab->scan[elem].keycode;
- }
+ int keycode;
- printk(KERN_INFO "%s: unknown key for scancode 0x%04x\n",
- dev->name, scancode);
-
- /* Reports userspace that an unknown keycode were got */
- return KEY_RESERVED;
+ ir_getkeycode(dev, scancode, &keycode);
+ IR_dprintk(1, "%s: scancode 0x%04x keycode 0x%02x\n",
+ dev->name, scancode, keycode);
+ return keycode;
}
EXPORT_SYMBOL_GPL(ir_g_keycode_from_table);
const char *driver_name)
{
struct ir_input_dev *ir_dev;
- struct ir_scancode *keymap = rc_tab->scan;
- int i, rc;
+ int rc;
if (rc_tab->scan == NULL || !rc_tab->size)
return -EINVAL;
if (!ir_dev)
return -ENOMEM;
- spin_lock_init(&ir_dev->rc_tab.lock);
+ ir_dev->driver_name = kasprintf(GFP_KERNEL, "%s", driver_name);
+ if (!ir_dev->driver_name) {
+ rc = -ENOMEM;
+ goto out_dev;
+ }
- ir_dev->driver_name = kmalloc(strlen(driver_name) + 1, GFP_KERNEL);
- if (!ir_dev->driver_name)
- return -ENOMEM;
- strcpy(ir_dev->driver_name, driver_name);
+ input_dev->getkeycode = ir_getkeycode;
+ input_dev->setkeycode = ir_setkeycode;
+ input_set_drvdata(input_dev, ir_dev);
+
+ spin_lock_init(&ir_dev->rc_tab.lock);
ir_dev->rc_tab.name = rc_tab->name;
- ir_dev->rc_tab.size = ir_roundup_tablesize(rc_tab->size);
- ir_dev->rc_tab.scan = kzalloc(ir_dev->rc_tab.size *
- sizeof(struct ir_scancode), GFP_KERNEL);
+ ir_dev->rc_tab.ir_type = rc_tab->ir_type;
+ ir_dev->rc_tab.alloc = roundup_pow_of_two(rc_tab->size *
+ sizeof(struct ir_scancode));
+ ir_dev->rc_tab.scan = kmalloc(ir_dev->rc_tab.alloc, GFP_KERNEL);
+ ir_dev->rc_tab.size = ir_dev->rc_tab.alloc / sizeof(struct ir_scancode);
+
if (!ir_dev->rc_tab.scan) {
- kfree(ir_dev);
- return -ENOMEM;
+ rc = -ENOMEM;
+ goto out_name;
}
- IR_dprintk(1, "Allocated space for %d keycode entries (%zd bytes)\n",
- ir_dev->rc_tab.size,
- ir_dev->rc_tab.size * sizeof(ir_dev->rc_tab.scan));
+ IR_dprintk(1, "Allocated space for %u keycode entries (%u bytes)\n",
+ ir_dev->rc_tab.size, ir_dev->rc_tab.alloc);
+
+ set_bit(EV_KEY, input_dev->evbit);
+ if (ir_setkeytable(input_dev, &ir_dev->rc_tab, rc_tab)) {
+ rc = -ENOMEM;
+ goto out_table;
+ }
- ir_copy_table(&ir_dev->rc_tab, rc_tab);
ir_dev->props = props;
if (props && props->open)
input_dev->open = ir_open;
if (props && props->close)
input_dev->close = ir_close;
- /* set the bits for the keys */
- IR_dprintk(1, "key map size: %d\n", rc_tab->size);
- for (i = 0; i < rc_tab->size; i++) {
- IR_dprintk(1, "#%d: setting bit for keycode 0x%04x\n",
- i, keymap[i].keycode);
- set_bit(keymap[i].keycode, input_dev->keybit);
- }
- clear_bit(0, input_dev->keybit);
-
- set_bit(EV_KEY, input_dev->evbit);
-
- input_dev->getkeycode = ir_getkeycode;
- input_dev->setkeycode = ir_setkeycode;
- input_set_drvdata(input_dev, ir_dev);
-
rc = ir_register_class(input_dev);
if (rc < 0)
- goto err;
+ goto out_table;
return 0;
-err:
- kfree(rc_tab->scan);
+out_table:
+ kfree(ir_dev->rc_tab.scan);
+out_name:
+ kfree(ir_dev->driver_name);
+out_dev:
kfree(ir_dev);
return rc;
}
ir_unregister_class(dev);
+ kfree(ir_dev->driver_name);
kfree(ir_dev);
}
EXPORT_SYMBOL_GPL(ir_input_unregister);
projects / GitHub / MotorolaMobilityLLC / kernel-slsi.git / commitdiff