drm/i915: convert dpms functions of dvo/sdvo/crt
authorDaniel Vetter <daniel.vetter@ffwll.ch>
Sun, 1 Jul 2012 20:42:24 +0000 (22:42 +0200)
committerDaniel Vetter <daniel.vetter@ffwll.ch>
Thu, 6 Sep 2012 05:55:17 +0000 (07:55 +0200)
Yeah, big patch but I couldn't come up with a neat idea of how to
split it up further, that wouldn't break dpms on cloned configs
somehow. But the changes in dvo/sdvo/crt are all pretty much
orthonogal, so it's not too bad a patch.

These are the only encoders that support cloning, which requires a few
special changes compared to the previous patches.
- Compute the desired state of the display pipe by walking all
  connected encoders and checking whether any has active connectors.
  To make this clearer, drop the old mode parameter to the crtc dpms
  function and rename it to intel_crtc_update_dpms.
- There's the curious case of intel_crtc->dpms_mode. With the previous
  patches to remove the overlay pipe A code and to rework the load
  detect pipe code, the big users are gone. We still keep it to avoid
  enabling the pipe twice, but we duplicate this logic with
  crtc->active, too. Still, leave this for now and just push a fake
  dpms mode into it that reflects the state of the display pipe.

Changes in the encoder dpms functions:
- We clamp the dpms state to the supported range right away. This is
  escpecially important for the VGA outputs, where only older hw
  supports the intermediate states. This (and the crt->adpa_reg patch)
  allows us to unify the crt dpms code again between all variants
  (gmch, vlv and pch).
- We only enable/disable the output for dvo/sdvo and leave the encoder
  running. The encoder will be disabled/enabled when we switch the
  state of the entire output pipeline (which will happen right away
  for non-cloned setups). This way the duplication is reduced and
  strange interaction when disabling output ports at the wrong time
  avoided.

The dpms code for all three types of connectors contains a bit of
duplicated logic, but I think keeping these special cases separate is
simpler: CRT is the only one that hanldes intermediate dpms state
(which requires extra logic to enable/disable things in the right
order), and introducing some abstraction just to share the code
between dvo and sdvo smells like overkill. We can do that once someone
bothers to implement cloning for the more modern outputs. But I doubt
that this will ever happen.

v2: s/crtc/crt/_set_dpms, noticed by Paulo Zanoni.

Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
drivers/gpu/drm/i915/intel_crt.c
drivers/gpu/drm/i915/intel_display.c
drivers/gpu/drm/i915/intel_drv.h
drivers/gpu/drm/i915/intel_dvo.c
drivers/gpu/drm/i915/intel_sdvo.c

index 543ea4063edd32a262c4d31fd5643423c8abaab4..76646c715a42d24e57c819010a898c8056558b21 100644 (file)
@@ -84,13 +84,17 @@ static void intel_enable_crt(struct intel_encoder *encoder)
        I915_WRITE(crt->adpa_reg, temp);
 }
 
-static void pch_crt_dpms(struct drm_encoder *encoder, int mode)
+/* Note: The caller is required to filter out dpms modes not supported by the
+ * platform. */
+static void intel_crt_set_dpms(struct intel_encoder *encoder, int mode)
 {
-       struct drm_device *dev = encoder->dev;
+       struct drm_device *dev = encoder->base.dev;
        struct drm_i915_private *dev_priv = dev->dev_private;
+       struct intel_crt *crt = intel_encoder_to_crt(encoder);
        u32 temp;
 
-       temp = I915_READ(PCH_ADPA);
+       temp = I915_READ(crt->adpa_reg);
+       temp &= ~(ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE);
        temp &= ~ADPA_DAC_ENABLE;
 
        switch (mode) {
@@ -98,44 +102,59 @@ static void pch_crt_dpms(struct drm_encoder *encoder, int mode)
                temp |= ADPA_DAC_ENABLE;
                break;
        case DRM_MODE_DPMS_STANDBY:
+               temp |= ADPA_DAC_ENABLE | ADPA_HSYNC_CNTL_DISABLE;
+               break;
        case DRM_MODE_DPMS_SUSPEND:
+               temp |= ADPA_DAC_ENABLE | ADPA_VSYNC_CNTL_DISABLE;
+               break;
        case DRM_MODE_DPMS_OFF:
-               /* Just leave port enable cleared */
+               temp |= ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE;
                break;
        }
 
-       I915_WRITE(PCH_ADPA, temp);
+       I915_WRITE(crt->adpa_reg, temp);
 }
 
-static void gmch_crt_dpms(struct drm_encoder *encoder, int mode)
+static void intel_crt_dpms(struct drm_connector *connector, int mode)
 {
-       struct drm_device *dev = encoder->dev;
-       struct drm_i915_private *dev_priv = dev->dev_private;
-       u32 temp;
-
-       temp = I915_READ(ADPA);
-       temp &= ~(ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE);
-       temp &= ~ADPA_DAC_ENABLE;
+       struct drm_device *dev = connector->dev;
+       struct intel_encoder *encoder = intel_attached_encoder(connector);
+       struct drm_crtc *crtc;
+       int old_dpms;
 
-       if (IS_VALLEYVIEW(dev) && mode != DRM_MODE_DPMS_ON)
+       /* PCH platforms and VLV only support on/off. */
+       if (INTEL_INFO(dev)->gen < 5 && mode != DRM_MODE_DPMS_ON)
                mode = DRM_MODE_DPMS_OFF;
 
-       switch (mode) {
-       case DRM_MODE_DPMS_ON:
-               temp |= ADPA_DAC_ENABLE;
-               break;
-       case DRM_MODE_DPMS_STANDBY:
-               temp |= ADPA_DAC_ENABLE | ADPA_HSYNC_CNTL_DISABLE;
-               break;
-       case DRM_MODE_DPMS_SUSPEND:
-               temp |= ADPA_DAC_ENABLE | ADPA_VSYNC_CNTL_DISABLE;
-               break;
-       case DRM_MODE_DPMS_OFF:
-               temp |= ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE;
-               break;
+       if (mode == connector->dpms)
+               return;
+
+       old_dpms = connector->dpms;
+       connector->dpms = mode;
+
+       /* Only need to change hw state when actually enabled */
+       crtc = encoder->base.crtc;
+       if (!crtc) {
+               encoder->connectors_active = false;
+               return;
        }
 
-       I915_WRITE(ADPA, temp);
+       /* We need the pipe to run for anything but OFF. */
+       if (mode == DRM_MODE_DPMS_OFF)
+               encoder->connectors_active = false;
+       else
+               encoder->connectors_active = true;
+
+       if (mode < old_dpms) {
+               /* From off to on, enable the pipe first. */
+               intel_crtc_update_dpms(crtc);
+
+               intel_crt_set_dpms(encoder, mode);
+       } else {
+               intel_crt_set_dpms(encoder, mode);
+
+               intel_crtc_update_dpms(crtc);
+       }
 }
 
 static int intel_crt_mode_valid(struct drm_connector *connector,
@@ -596,27 +615,17 @@ static void intel_crt_reset(struct drm_connector *connector)
  * Routines for controlling stuff on the analog port
  */
 
-static const struct drm_encoder_helper_funcs pch_encoder_funcs = {
-       .mode_fixup = intel_crt_mode_fixup,
-       .prepare = intel_encoder_noop,
-       .commit = intel_encoder_noop,
-       .mode_set = intel_crt_mode_set,
-       .dpms = pch_crt_dpms,
-       .disable = intel_encoder_disable,
-};
-
-static const struct drm_encoder_helper_funcs gmch_encoder_funcs = {
+static const struct drm_encoder_helper_funcs crt_encoder_funcs = {
        .mode_fixup = intel_crt_mode_fixup,
        .prepare = intel_encoder_noop,
        .commit = intel_encoder_noop,
        .mode_set = intel_crt_mode_set,
-       .dpms = gmch_crt_dpms,
        .disable = intel_encoder_disable,
 };
 
 static const struct drm_connector_funcs intel_crt_connector_funcs = {
        .reset = intel_crt_reset,
-       .dpms = drm_helper_connector_dpms,
+       .dpms = intel_crt_dpms,
        .detect = intel_crt_detect,
        .fill_modes = drm_helper_probe_single_connector_modes,
        .destroy = intel_crt_destroy,
@@ -657,7 +666,6 @@ void intel_crt_init(struct drm_device *dev)
        struct intel_crt *crt;
        struct intel_connector *intel_connector;
        struct drm_i915_private *dev_priv = dev->dev_private;
-       const struct drm_encoder_helper_funcs *encoder_helper_funcs;
 
        /* Skip machines without VGA that falsely report hotplug events */
        if (dmi_check_system(intel_no_crt))
@@ -695,11 +703,6 @@ void intel_crt_init(struct drm_device *dev)
                connector->interlace_allowed = 1;
        connector->doublescan_allowed = 0;
 
-       if (HAS_PCH_SPLIT(dev))
-               encoder_helper_funcs = &pch_encoder_funcs;
-       else
-               encoder_helper_funcs = &gmch_encoder_funcs;
-
        if (HAS_PCH_SPLIT(dev))
                crt->adpa_reg = PCH_ADPA;
        else if (IS_VALLEYVIEW(dev))
@@ -710,7 +713,7 @@ void intel_crt_init(struct drm_device *dev)
        crt->base.disable = intel_disable_crt;
        crt->base.enable = intel_enable_crt;
 
-       drm_encoder_helper_add(&crt->base.base, encoder_helper_funcs);
+       drm_encoder_helper_add(&crt->base.base, &crt_encoder_funcs);
        drm_connector_helper_add(connector, &intel_crt_connector_helper_funcs);
 
        drm_sysfs_connector_add(connector);
index cbd356f43d35d45b2cf4938e4a248922bc6f419c..0d48ebe6ac9d8a183ce61e8cee89facaf068948c 100644 (file)
@@ -3462,34 +3462,31 @@ static void i9xx_crtc_off(struct drm_crtc *crtc)
 /**
  * Sets the power management mode of the pipe and plane.
  */
-static void intel_crtc_dpms(struct drm_crtc *crtc, int mode)
+void intel_crtc_update_dpms(struct drm_crtc *crtc)
 {
        struct drm_device *dev = crtc->dev;
        struct drm_i915_private *dev_priv = dev->dev_private;
        struct drm_i915_master_private *master_priv;
        struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+       struct intel_encoder *intel_encoder;
        int pipe = intel_crtc->pipe;
-       bool enabled;
+       bool enabled, enable = false;
+       int mode;
+
+       for_each_encoder_on_crtc(dev, crtc, intel_encoder)
+               enable |= intel_encoder->connectors_active;
+
+       mode = enable ? DRM_MODE_DPMS_ON : DRM_MODE_DPMS_OFF;
 
        if (intel_crtc->dpms_mode == mode)
                return;
 
        intel_crtc->dpms_mode = mode;
 
-       /* XXX: When our outputs are all unaware of DPMS modes other than off
-        * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC.
-        */
-       switch (mode) {
-       case DRM_MODE_DPMS_ON:
-       case DRM_MODE_DPMS_STANDBY:
-       case DRM_MODE_DPMS_SUSPEND:
+       if (enable)
                dev_priv->display.crtc_enable(crtc);
-               break;
-
-       case DRM_MODE_DPMS_OFF:
+       else
                dev_priv->display.crtc_disable(crtc);
-               break;
-       }
 
        if (!dev->primary->master)
                return;
@@ -3498,7 +3495,7 @@ static void intel_crtc_dpms(struct drm_crtc *crtc, int mode)
        if (!master_priv->sarea_priv)
                return;
 
-       enabled = crtc->enabled && mode != DRM_MODE_DPMS_OFF;
+       enabled = crtc->enabled && enable;
 
        switch (pipe) {
        case 0:
@@ -3517,11 +3514,12 @@ static void intel_crtc_dpms(struct drm_crtc *crtc, int mode)
 
 static void intel_crtc_disable(struct drm_crtc *crtc)
 {
-       struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
        struct drm_device *dev = crtc->dev;
        struct drm_i915_private *dev_priv = dev->dev_private;
 
-       crtc_funcs->dpms(crtc, DRM_MODE_DPMS_OFF);
+       /* crtc->disable is only called when we have no encoders, hence this
+        * will disable the pipe. */
+       intel_crtc_update_dpms(crtc);
        dev_priv->display.off(crtc);
 
        assert_plane_disabled(dev->dev_private, to_intel_crtc(crtc)->plane);
@@ -3581,11 +3579,11 @@ void intel_encoder_dpms(struct intel_encoder *encoder, int mode)
        if (mode == DRM_MODE_DPMS_ON) {
                encoder->connectors_active = true;
 
-               intel_crtc_dpms(encoder->base.crtc, DRM_MODE_DPMS_ON);
+               intel_crtc_update_dpms(encoder->base.crtc);
        } else {
                encoder->connectors_active = false;
 
-               intel_crtc_dpms(encoder->base.crtc, DRM_MODE_DPMS_OFF);
+               intel_crtc_update_dpms(encoder->base.crtc);
        }
 }
 
@@ -6609,7 +6607,6 @@ static void intel_crtc_reset(struct drm_crtc *crtc)
 }
 
 static struct drm_crtc_helper_funcs intel_helper_funcs = {
-       .dpms = intel_crtc_dpms,
        .mode_fixup = intel_crtc_mode_fixup,
        .mode_set = intel_crtc_mode_set,
        .mode_set_base = intel_pipe_set_base,
index 759dcbab0e5d6ba3953061567fb278b575fbc869..245624587db1a0e63bbcf462d6bd3974428ecd62 100644 (file)
@@ -411,6 +411,7 @@ extern void intel_panel_destroy_backlight(struct drm_device *dev);
 extern enum drm_connector_status intel_panel_detect(struct drm_device *dev);
 
 extern void intel_crtc_load_lut(struct drm_crtc *crtc);
+extern void intel_crtc_update_dpms(struct drm_crtc *crtc);
 extern void intel_encoder_prepare(struct drm_encoder *encoder);
 extern void intel_encoder_commit(struct drm_encoder *encoder);
 extern void intel_encoder_noop(struct drm_encoder *encoder);
index 4ad988fb868526c6b809c4455fbbe5bf25f20b2e..c55a13ea7ae8b5b27bf3b66e0feaab8c47a864d8 100644 (file)
@@ -129,21 +129,39 @@ static void intel_enable_dvo(struct intel_encoder *encoder)
        intel_dvo->dev.dev_ops->dpms(&intel_dvo->dev, true);
 }
 
-static void intel_dvo_dpms(struct drm_encoder *encoder, int mode)
+static void intel_dvo_dpms(struct drm_connector *connector, int mode)
 {
-       struct drm_i915_private *dev_priv = encoder->dev->dev_private;
-       struct intel_dvo *intel_dvo = enc_to_intel_dvo(encoder);
-       u32 dvo_reg = intel_dvo->dev.dvo_reg;
-       u32 temp = I915_READ(dvo_reg);
+       struct intel_dvo *intel_dvo = intel_attached_dvo(connector);
+       struct drm_crtc *crtc;
+
+       /* dvo supports only 2 dpms states. */
+       if (mode != DRM_MODE_DPMS_ON)
+               mode = DRM_MODE_DPMS_OFF;
+
+       if (mode == connector->dpms)
+               return;
+
+       connector->dpms = mode;
+
+       /* Only need to change hw state when actually enabled */
+       crtc = intel_dvo->base.base.crtc;
+       if (!crtc) {
+               intel_dvo->base.connectors_active = false;
+               return;
+       }
 
        if (mode == DRM_MODE_DPMS_ON) {
-               I915_WRITE(dvo_reg, temp | DVO_ENABLE);
-               I915_READ(dvo_reg);
+               intel_dvo->base.connectors_active = true;
+
+               intel_crtc_update_dpms(crtc);
+
                intel_dvo->dev.dev_ops->dpms(&intel_dvo->dev, true);
        } else {
                intel_dvo->dev.dev_ops->dpms(&intel_dvo->dev, false);
-               I915_WRITE(dvo_reg, temp & ~DVO_ENABLE);
-               I915_READ(dvo_reg);
+
+               intel_dvo->base.connectors_active = false;
+
+               intel_crtc_update_dpms(crtc);
        }
 }
 
@@ -299,7 +317,6 @@ static void intel_dvo_destroy(struct drm_connector *connector)
 }
 
 static const struct drm_encoder_helper_funcs intel_dvo_helper_funcs = {
-       .dpms = intel_dvo_dpms,
        .mode_fixup = intel_dvo_mode_fixup,
        .prepare = intel_encoder_noop,
        .mode_set = intel_dvo_mode_set,
@@ -308,7 +325,7 @@ static const struct drm_encoder_helper_funcs intel_dvo_helper_funcs = {
 };
 
 static const struct drm_connector_funcs intel_dvo_connector_funcs = {
-       .dpms = drm_helper_connector_dpms,
+       .dpms = intel_dvo_dpms,
        .detect = intel_dvo_detect,
        .destroy = intel_dvo_destroy,
        .fill_modes = drm_helper_probe_single_connector_modes,
index 20feaa34b0633f30585ce8e5978a3cdd3d899c0e..a01c47021f53bad59aa0ab3abf69ed49b81959a8 100644 (file)
@@ -1192,51 +1192,44 @@ static void intel_enable_sdvo(struct intel_encoder *encoder)
        intel_sdvo_set_active_outputs(intel_sdvo, intel_sdvo->attached_output);
 }
 
-static void intel_sdvo_dpms(struct drm_encoder *encoder, int mode)
+static void intel_sdvo_dpms(struct drm_connector *connector, int mode)
 {
-       struct drm_device *dev = encoder->dev;
-       struct drm_i915_private *dev_priv = dev->dev_private;
-       struct intel_sdvo *intel_sdvo = to_intel_sdvo(encoder);
-       struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc);
-       u32 temp;
+       struct drm_crtc *crtc;
+       struct intel_sdvo *intel_sdvo = intel_attached_sdvo(connector);
+
+       /* dvo supports only 2 dpms states. */
+       if (mode != DRM_MODE_DPMS_ON)
+               mode = DRM_MODE_DPMS_OFF;
+
+       if (mode == connector->dpms)
+               return;
+
+       connector->dpms = mode;
+
+       /* Only need to change hw state when actually enabled */
+       crtc = intel_sdvo->base.base.crtc;
+       if (!crtc) {
+               intel_sdvo->base.connectors_active = false;
+               return;
+       }
 
        if (mode != DRM_MODE_DPMS_ON) {
                intel_sdvo_set_active_outputs(intel_sdvo, 0);
                if (0)
                        intel_sdvo_set_encoder_power_state(intel_sdvo, mode);
 
-               if (mode == DRM_MODE_DPMS_OFF) {
-                       temp = I915_READ(intel_sdvo->sdvo_reg);
-                       if ((temp & SDVO_ENABLE) != 0) {
-                               intel_sdvo_write_sdvox(intel_sdvo, temp & ~SDVO_ENABLE);
-                       }
-               }
+               intel_sdvo->base.connectors_active = false;
+
+               intel_crtc_update_dpms(crtc);
        } else {
-               bool input1, input2;
-               int i;
-               u8 status;
-
-               temp = I915_READ(intel_sdvo->sdvo_reg);
-               if ((temp & SDVO_ENABLE) == 0)
-                       intel_sdvo_write_sdvox(intel_sdvo, temp | SDVO_ENABLE);
-               for (i = 0; i < 2; i++)
-                       intel_wait_for_vblank(dev, intel_crtc->pipe);
-
-               status = intel_sdvo_get_trained_inputs(intel_sdvo, &input1, &input2);
-               /* Warn if the device reported failure to sync.
-                * A lot of SDVO devices fail to notify of sync, but it's
-                * a given it the status is a success, we succeeded.
-                */
-               if (status == SDVO_CMD_STATUS_SUCCESS && !input1) {
-                       DRM_DEBUG_KMS("First %s output reported failure to "
-                                       "sync\n", SDVO_NAME(intel_sdvo));
-               }
+               intel_sdvo->base.connectors_active = true;
+
+               intel_crtc_update_dpms(crtc);
 
                if (0)
                        intel_sdvo_set_encoder_power_state(intel_sdvo, mode);
                intel_sdvo_set_active_outputs(intel_sdvo, intel_sdvo->attached_output);
        }
-       return;
 }
 
 static int intel_sdvo_mode_valid(struct drm_connector *connector,
@@ -1895,7 +1888,6 @@ done:
 }
 
 static const struct drm_encoder_helper_funcs intel_sdvo_helper_funcs = {
-       .dpms = intel_sdvo_dpms,
        .mode_fixup = intel_sdvo_mode_fixup,
        .prepare = intel_encoder_noop,
        .mode_set = intel_sdvo_mode_set,
@@ -1904,7 +1896,7 @@ static const struct drm_encoder_helper_funcs intel_sdvo_helper_funcs = {
 };
 
 static const struct drm_connector_funcs intel_sdvo_connector_funcs = {
-       .dpms = drm_helper_connector_dpms,
+       .dpms = intel_sdvo_dpms,
        .detect = intel_sdvo_detect,
        .fill_modes = drm_helper_probe_single_connector_modes,
        .set_property = intel_sdvo_set_property,