--- /dev/null
+/*
+ * arch/arm/mach-at91/at91sam9263.c
+ *
+ * Copyright (C) 2007 Atmel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/arch/at91sam9263.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_rstc.h>
+
+#include "generic.h"
+#include "clock.h"
+
+static struct map_desc at91sam9263_io_desc[] __initdata = {
+ {
+ .virtual = AT91_VA_BASE_SYS,
+ .pfn = __phys_to_pfn(AT91_BASE_SYS),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = AT91_IO_VIRT_BASE - AT91SAM9263_SRAM0_SIZE,
+ .pfn = __phys_to_pfn(AT91SAM9263_SRAM0_BASE),
+ .length = AT91SAM9263_SRAM0_SIZE,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = AT91_IO_VIRT_BASE - AT91SAM9263_SRAM0_SIZE - AT91SAM9263_SRAM1_SIZE,
+ .pfn = __phys_to_pfn(AT91SAM9263_SRAM1_BASE),
+ .length = AT91SAM9263_SRAM1_SIZE,
+ .type = MT_DEVICE,
+ },
+};
+
+/* --------------------------------------------------------------------
+ * Clocks
+ * -------------------------------------------------------------------- */
+
+/*
+ * The peripheral clocks.
+ */
+static struct clk pioA_clk = {
+ .name = "pioA_clk",
+ .pmc_mask = 1 << AT91SAM9263_ID_PIOA,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioB_clk = {
+ .name = "pioB_clk",
+ .pmc_mask = 1 << AT91SAM9263_ID_PIOB,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioCDE_clk = {
+ .name = "pioCDE_clk",
+ .pmc_mask = 1 << AT91SAM9263_ID_PIOCDE,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart0_clk = {
+ .name = "usart0_clk",
+ .pmc_mask = 1 << AT91SAM9263_ID_US0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart1_clk = {
+ .name = "usart1_clk",
+ .pmc_mask = 1 << AT91SAM9263_ID_US1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart2_clk = {
+ .name = "usart2_clk",
+ .pmc_mask = 1 << AT91SAM9263_ID_US2,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk mmc0_clk = {
+ .name = "mci0_clk",
+ .pmc_mask = 1 << AT91SAM9263_ID_MCI0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk mmc1_clk = {
+ .name = "mci1_clk",
+ .pmc_mask = 1 << AT91SAM9263_ID_MCI1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk twi_clk = {
+ .name = "twi_clk",
+ .pmc_mask = 1 << AT91SAM9263_ID_TWI,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk spi0_clk = {
+ .name = "spi0_clk",
+ .pmc_mask = 1 << AT91SAM9263_ID_SPI0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk spi1_clk = {
+ .name = "spi1_clk",
+ .pmc_mask = 1 << AT91SAM9263_ID_SPI1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk tcb_clk = {
+ .name = "tcb_clk",
+ .pmc_mask = 1 << AT91SAM9263_ID_TCB,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk ether_clk = {
+ .name = "ether_clk",
+ .pmc_mask = 1 << AT91SAM9263_ID_EMAC,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk udc_clk = {
+ .name = "udc_clk",
+ .pmc_mask = 1 << AT91SAM9263_ID_UDP,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk isi_clk = {
+ .name = "isi_clk",
+ .pmc_mask = 1 << AT91SAM9263_ID_ISI,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk lcdc_clk = {
+ .name = "lcdc_clk",
+ .pmc_mask = 1 << AT91SAM9263_ID_ISI,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk ohci_clk = {
+ .name = "ohci_clk",
+ .pmc_mask = 1 << AT91SAM9263_ID_UHP,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+
+static struct clk *periph_clocks[] __initdata = {
+ &pioA_clk,
+ &pioB_clk,
+ &pioCDE_clk,
+ &usart0_clk,
+ &usart1_clk,
+ &usart2_clk,
+ &mmc0_clk,
+ &mmc1_clk,
+ // can
+ &twi_clk,
+ &spi0_clk,
+ &spi1_clk,
+ // ssc0 .. ssc1
+ // ac97
+ &tcb_clk,
+ // pwmc
+ ðer_clk,
+ // 2dge
+ &udc_clk,
+ &isi_clk,
+ &lcdc_clk,
+ // dma
+ &ohci_clk,
+ // irq0 .. irq1
+};
+
+/*
+ * The four programmable clocks.
+ * You must configure pin multiplexing to bring these signals out.
+ */
+static struct clk pck0 = {
+ .name = "pck0",
+ .pmc_mask = AT91_PMC_PCK0,
+ .type = CLK_TYPE_PROGRAMMABLE,
+ .id = 0,
+};
+static struct clk pck1 = {
+ .name = "pck1",
+ .pmc_mask = AT91_PMC_PCK1,
+ .type = CLK_TYPE_PROGRAMMABLE,
+ .id = 1,
+};
+static struct clk pck2 = {
+ .name = "pck2",
+ .pmc_mask = AT91_PMC_PCK2,
+ .type = CLK_TYPE_PROGRAMMABLE,
+ .id = 2,
+};
+static struct clk pck3 = {
+ .name = "pck3",
+ .pmc_mask = AT91_PMC_PCK3,
+ .type = CLK_TYPE_PROGRAMMABLE,
+ .id = 3,
+};
+
+static void __init at91sam9263_register_clocks(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
+ clk_register(periph_clocks[i]);
+
+ clk_register(&pck0);
+ clk_register(&pck1);
+ clk_register(&pck2);
+ clk_register(&pck3);
+}
+
+/* --------------------------------------------------------------------
+ * GPIO
+ * -------------------------------------------------------------------- */
+
+static struct at91_gpio_bank at91sam9263_gpio[] = {
+ {
+ .id = AT91SAM9263_ID_PIOA,
+ .offset = AT91_PIOA,
+ .clock = &pioA_clk,
+ }, {
+ .id = AT91SAM9263_ID_PIOB,
+ .offset = AT91_PIOB,
+ .clock = &pioB_clk,
+ }, {
+ .id = AT91SAM9263_ID_PIOCDE,
+ .offset = AT91_PIOC,
+ .clock = &pioCDE_clk,
+ }, {
+ .id = AT91SAM9263_ID_PIOCDE,
+ .offset = AT91_PIOD,
+ .clock = &pioCDE_clk,
+ }, {
+ .id = AT91SAM9263_ID_PIOCDE,
+ .offset = AT91_PIOE,
+ .clock = &pioCDE_clk,
+ }
+};
+
+static void at91sam9263_reset(void)
+{
+ at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
+}
+
+
+/* --------------------------------------------------------------------
+ * AT91SAM9263 processor initialization
+ * -------------------------------------------------------------------- */
+
+void __init at91sam9263_initialize(unsigned long main_clock)
+{
+ /* Map peripherals */
+ iotable_init(at91sam9263_io_desc, ARRAY_SIZE(at91sam9263_io_desc));
+
+ at91_arch_reset = at91sam9263_reset;
+ at91_extern_irq = (1 << AT91SAM9263_ID_IRQ0) | (1 << AT91SAM9263_ID_IRQ1);
+
+ /* Init clock subsystem */
+ at91_clock_init(main_clock);
+
+ /* Register the processor-specific clocks */
+ at91sam9263_register_clocks();
+
+ /* Register GPIO subsystem */
+ at91_gpio_init(at91sam9263_gpio, 5);
+}
+
+/* --------------------------------------------------------------------
+ * Interrupt initialization
+ * -------------------------------------------------------------------- */
+
+/*
+ * The default interrupt priority levels (0 = lowest, 7 = highest).
+ */
+static unsigned int at91sam9263_default_irq_priority[NR_AIC_IRQS] __initdata = {
+ 7, /* Advanced Interrupt Controller (FIQ) */
+ 7, /* System Peripherals */
+ 0, /* Parallel IO Controller A */
+ 0, /* Parallel IO Controller B */
+ 0, /* Parallel IO Controller C, D and E */
+ 0,
+ 0,
+ 6, /* USART 0 */
+ 6, /* USART 1 */
+ 6, /* USART 2 */
+ 0, /* Multimedia Card Interface 0 */
+ 0, /* Multimedia Card Interface 1 */
+ 4, /* CAN */
+ 0, /* Two-Wire Interface */
+ 6, /* Serial Peripheral Interface 0 */
+ 6, /* Serial Peripheral Interface 1 */
+ 5, /* Serial Synchronous Controller 0 */
+ 5, /* Serial Synchronous Controller 1 */
+ 6, /* AC97 Controller */
+ 0, /* Timer Counter 0, 1 and 2 */
+ 0, /* Pulse Width Modulation Controller */
+ 3, /* Ethernet */
+ 0,
+ 0, /* 2D Graphic Engine */
+ 3, /* USB Device Port */
+ 0, /* Image Sensor Interface */
+ 3, /* LDC Controller */
+ 0, /* DMA Controller */
+ 0,
+ 3, /* USB Host port */
+ 0, /* Advanced Interrupt Controller (IRQ0) */
+ 0, /* Advanced Interrupt Controller (IRQ1) */
+};
+
+void __init at91sam9263_init_interrupts(unsigned int priority[NR_AIC_IRQS])
+{
+ if (!priority)
+ priority = at91sam9263_default_irq_priority;
+
+ /* Initialize the AIC interrupt controller */
+ at91_aic_init(priority);
+
+ /* Enable GPIO interrupts */
+ at91_gpio_irq_setup();
+}
--- /dev/null
+/*
+ * arch/arm/mach-at91/at91sam9263_devices.c
+ *
+ * Copyright (C) 2007 Atmel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <linux/platform_device.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/at91sam9263.h>
+#include <asm/arch/at91sam926x_mc.h>
+#include <asm/arch/at91sam9263_matrix.h>
+
+#include "generic.h"
+
+#define SZ_512 0x00000200
+#define SZ_256 0x00000100
+#define SZ_16 0x00000010
+
+/* --------------------------------------------------------------------
+ * USB Host
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static u64 ohci_dmamask = 0xffffffffUL;
+static struct at91_usbh_data usbh_data;
+
+static struct resource usbh_resources[] = {
+ [0] = {
+ .start = AT91SAM9263_UHP_BASE,
+ .end = AT91SAM9263_UHP_BASE + SZ_1M - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9263_ID_UHP,
+ .end = AT91SAM9263_ID_UHP,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91_usbh_device = {
+ .name = "at91_ohci",
+ .id = -1,
+ .dev = {
+ .dma_mask = &ohci_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ .platform_data = &usbh_data,
+ },
+ .resource = usbh_resources,
+ .num_resources = ARRAY_SIZE(usbh_resources),
+};
+
+void __init at91_add_device_usbh(struct at91_usbh_data *data)
+{
+ int i;
+
+ if (!data)
+ return;
+
+ /* Enable VBus control for UHP ports */
+ for (i = 0; i < data->ports; i++) {
+ if (data->vbus_pin[i])
+ at91_set_gpio_output(data->vbus_pin[i], 0);
+ }
+
+ usbh_data = *data;
+ platform_device_register(&at91_usbh_device);
+}
+#else
+void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * USB Device (Gadget)
+ * -------------------------------------------------------------------- */
+
+#ifdef CONFIG_USB_GADGET_AT91
+static struct at91_udc_data udc_data;
+
+static struct resource udc_resources[] = {
+ [0] = {
+ .start = AT91SAM9263_BASE_UDP,
+ .end = AT91SAM9263_BASE_UDP + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9263_ID_UDP,
+ .end = AT91SAM9263_ID_UDP,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91_udc_device = {
+ .name = "at91_udc",
+ .id = -1,
+ .dev = {
+ .platform_data = &udc_data,
+ },
+ .resource = udc_resources,
+ .num_resources = ARRAY_SIZE(udc_resources),
+};
+
+void __init at91_add_device_udc(struct at91_udc_data *data)
+{
+ if (!data)
+ return;
+
+ if (data->vbus_pin) {
+ at91_set_gpio_input(data->vbus_pin, 0);
+ at91_set_deglitch(data->vbus_pin, 1);
+ }
+
+ /* Pullup pin is handled internally by USB device peripheral */
+
+ udc_data = *data;
+ platform_device_register(&at91_udc_device);
+}
+#else
+void __init at91_add_device_udc(struct at91_udc_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * Ethernet
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
+static u64 eth_dmamask = 0xffffffffUL;
+static struct at91_eth_data eth_data;
+
+static struct resource eth_resources[] = {
+ [0] = {
+ .start = AT91SAM9263_BASE_EMAC,
+ .end = AT91SAM9263_BASE_EMAC + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9263_ID_EMAC,
+ .end = AT91SAM9263_ID_EMAC,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9263_eth_device = {
+ .name = "macb",
+ .id = -1,
+ .dev = {
+ .dma_mask = ð_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ .platform_data = ð_data,
+ },
+ .resource = eth_resources,
+ .num_resources = ARRAY_SIZE(eth_resources),
+};
+
+void __init at91_add_device_eth(struct at91_eth_data *data)
+{
+ if (!data)
+ return;
+
+ if (data->phy_irq_pin) {
+ at91_set_gpio_input(data->phy_irq_pin, 0);
+ at91_set_deglitch(data->phy_irq_pin, 1);
+ }
+
+ /* Pins used for MII and RMII */
+ at91_set_A_periph(AT91_PIN_PE21, 0); /* ETXCK_EREFCK */
+ at91_set_B_periph(AT91_PIN_PC25, 0); /* ERXDV */
+ at91_set_A_periph(AT91_PIN_PE25, 0); /* ERX0 */
+ at91_set_A_periph(AT91_PIN_PE26, 0); /* ERX1 */
+ at91_set_A_periph(AT91_PIN_PE27, 0); /* ERXER */
+ at91_set_A_periph(AT91_PIN_PE28, 0); /* ETXEN */
+ at91_set_A_periph(AT91_PIN_PE23, 0); /* ETX0 */
+ at91_set_A_periph(AT91_PIN_PE24, 0); /* ETX1 */
+ at91_set_A_periph(AT91_PIN_PE30, 0); /* EMDIO */
+ at91_set_A_periph(AT91_PIN_PE29, 0); /* EMDC */
+
+ if (!data->is_rmii) {
+ at91_set_A_periph(AT91_PIN_PE22, 0); /* ECRS */
+ at91_set_B_periph(AT91_PIN_PC26, 0); /* ECOL */
+ at91_set_B_periph(AT91_PIN_PC22, 0); /* ERX2 */
+ at91_set_B_periph(AT91_PIN_PC23, 0); /* ERX3 */
+ at91_set_B_periph(AT91_PIN_PC27, 0); /* ERXCK */
+ at91_set_B_periph(AT91_PIN_PC20, 0); /* ETX2 */
+ at91_set_B_periph(AT91_PIN_PC21, 0); /* ETX3 */
+ at91_set_B_periph(AT91_PIN_PC24, 0); /* ETXER */
+ }
+
+ eth_data = *data;
+ platform_device_register(&at91sam9263_eth_device);
+}
+#else
+void __init at91_add_device_eth(struct at91_eth_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * MMC / SD
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
+static u64 mmc_dmamask = 0xffffffffUL;
+static struct at91_mmc_data mmc0_data, mmc1_data;
+
+static struct resource mmc0_resources[] = {
+ [0] = {
+ .start = AT91SAM9263_BASE_MCI0,
+ .end = AT91SAM9263_BASE_MCI0 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9263_ID_MCI0,
+ .end = AT91SAM9263_ID_MCI0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9263_mmc0_device = {
+ .name = "at91_mci",
+ .id = 0,
+ .dev = {
+ .dma_mask = &mmc_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ .platform_data = &mmc0_data,
+ },
+ .resource = mmc0_resources,
+ .num_resources = ARRAY_SIZE(mmc0_resources),
+};
+
+static struct resource mmc1_resources[] = {
+ [0] = {
+ .start = AT91SAM9263_BASE_MCI1,
+ .end = AT91SAM9263_BASE_MCI1 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9263_ID_MCI1,
+ .end = AT91SAM9263_ID_MCI1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9263_mmc1_device = {
+ .name = "at91_mci",
+ .id = 1,
+ .dev = {
+ .dma_mask = &mmc_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ .platform_data = &mmc1_data,
+ },
+ .resource = mmc1_resources,
+ .num_resources = ARRAY_SIZE(mmc1_resources),
+};
+
+void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
+{
+ if (!data)
+ return;
+
+ /* input/irq */
+ if (data->det_pin) {
+ at91_set_gpio_input(data->det_pin, 1);
+ at91_set_deglitch(data->det_pin, 1);
+ }
+ if (data->wp_pin)
+ at91_set_gpio_input(data->wp_pin, 1);
+ if (data->vcc_pin)
+ at91_set_gpio_output(data->vcc_pin, 0);
+
+ if (mmc_id == 0) { /* MCI0 */
+ /* CLK */
+ at91_set_A_periph(AT91_PIN_PA12, 0);
+
+ if (data->slot_b) {
+ /* CMD */
+ at91_set_A_periph(AT91_PIN_PA16, 1);
+
+ /* DAT0, maybe DAT1..DAT3 */
+ at91_set_A_periph(AT91_PIN_PA17, 1);
+ if (data->wire4) {
+ at91_set_A_periph(AT91_PIN_PA18, 1);
+ at91_set_A_periph(AT91_PIN_PA19, 1);
+ at91_set_A_periph(AT91_PIN_PA20, 1);
+ }
+ } else {
+ /* CMD */
+ at91_set_A_periph(AT91_PIN_PA1, 1);
+
+ /* DAT0, maybe DAT1..DAT3 */
+ at91_set_A_periph(AT91_PIN_PA0, 1);
+ if (data->wire4) {
+ at91_set_A_periph(AT91_PIN_PA3, 1);
+ at91_set_A_periph(AT91_PIN_PA4, 1);
+ at91_set_A_periph(AT91_PIN_PA5, 1);
+ }
+ }
+
+ mmc0_data = *data;
+ at91_clock_associate("mci0_clk", &at91sam9263_mmc1_device.dev, "mci_clk");
+ platform_device_register(&at91sam9263_mmc0_device);
+ } else { /* MCI1 */
+ /* CLK */
+ at91_set_A_periph(AT91_PIN_PA6, 0);
+
+ if (data->slot_b) {
+ /* CMD */
+ at91_set_A_periph(AT91_PIN_PA21, 1);
+
+ /* DAT0, maybe DAT1..DAT3 */
+ at91_set_A_periph(AT91_PIN_PA22, 1);
+ if (data->wire4) {
+ at91_set_A_periph(AT91_PIN_PA23, 1);
+ at91_set_A_periph(AT91_PIN_PA24, 1);
+ at91_set_A_periph(AT91_PIN_PA25, 1);
+ }
+ } else {
+ /* CMD */
+ at91_set_A_periph(AT91_PIN_PA7, 1);
+
+ /* DAT0, maybe DAT1..DAT3 */
+ at91_set_A_periph(AT91_PIN_PA8, 1);
+ if (data->wire4) {
+ at91_set_A_periph(AT91_PIN_PA9, 1);
+ at91_set_A_periph(AT91_PIN_PA10, 1);
+ at91_set_A_periph(AT91_PIN_PA11, 1);
+ }
+ }
+
+ mmc1_data = *data;
+ at91_clock_associate("mci1_clk", &at91sam9263_mmc1_device.dev, "mci_clk");
+ platform_device_register(&at91sam9263_mmc1_device);
+ }
+}
+#else
+void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * NAND / SmartMedia
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE)
+static struct at91_nand_data nand_data;
+
+#define NAND_BASE AT91_CHIPSELECT_3
+
+static struct resource nand_resources[] = {
+ {
+ .start = NAND_BASE,
+ .end = NAND_BASE + SZ_256M - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device at91sam9263_nand_device = {
+ .name = "at91_nand",
+ .id = -1,
+ .dev = {
+ .platform_data = &nand_data,
+ },
+ .resource = nand_resources,
+ .num_resources = ARRAY_SIZE(nand_resources),
+};
+
+void __init at91_add_device_nand(struct at91_nand_data *data)
+{
+ unsigned long csa, mode;
+
+ if (!data)
+ return;
+
+ csa = at91_sys_read(AT91_MATRIX_EBI0CSA);
+ at91_sys_write(AT91_MATRIX_EBI0CSA, csa | AT91_MATRIX_EBI0_CS3A_SMC);
+
+ /* set the bus interface characteristics */
+ at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0)
+ | AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0));
+
+ at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3)
+ | AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3));
+
+ at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5));
+
+ if (data->bus_width_16)
+ mode = AT91_SMC_DBW_16;
+ else
+ mode = AT91_SMC_DBW_8;
+ at91_sys_write(AT91_SMC_MODE(3), mode | AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_TDF_(2));
+
+ /* enable pin */
+ if (data->enable_pin)
+ at91_set_gpio_output(data->enable_pin, 1);
+
+ /* ready/busy pin */
+ if (data->rdy_pin)
+ at91_set_gpio_input(data->rdy_pin, 1);
+
+ /* card detect pin */
+ if (data->det_pin)
+ at91_set_gpio_input(data->det_pin, 1);
+
+ nand_data = *data;
+ platform_device_register(&at91sam9263_nand_device);
+}
+#else
+void __init at91_add_device_nand(struct at91_nand_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * TWI (i2c)
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
+
+static struct resource twi_resources[] = {
+ [0] = {
+ .start = AT91SAM9263_BASE_TWI,
+ .end = AT91SAM9263_BASE_TWI + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9263_ID_TWI,
+ .end = AT91SAM9263_ID_TWI,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9263_twi_device = {
+ .name = "at91_i2c",
+ .id = -1,
+ .resource = twi_resources,
+ .num_resources = ARRAY_SIZE(twi_resources),
+};
+
+void __init at91_add_device_i2c(void)
+{
+ /* pins used for TWI interface */
+ at91_set_A_periph(AT91_PIN_PB4, 0); /* TWD */
+ at91_set_multi_drive(AT91_PIN_PB4, 1);
+
+ at91_set_A_periph(AT91_PIN_PB5, 0); /* TWCK */
+ at91_set_multi_drive(AT91_PIN_PB5, 1);
+
+ platform_device_register(&at91sam9263_twi_device);
+}
+#else
+void __init at91_add_device_i2c(void) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * SPI
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
+static u64 spi_dmamask = 0xffffffffUL;
+
+static struct resource spi0_resources[] = {
+ [0] = {
+ .start = AT91SAM9263_BASE_SPI0,
+ .end = AT91SAM9263_BASE_SPI0 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9263_ID_SPI0,
+ .end = AT91SAM9263_ID_SPI0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9263_spi0_device = {
+ .name = "atmel_spi",
+ .id = 0,
+ .dev = {
+ .dma_mask = &spi_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .resource = spi0_resources,
+ .num_resources = ARRAY_SIZE(spi0_resources),
+};
+
+static const unsigned spi0_standard_cs[4] = { AT91_PIN_PA5, AT91_PIN_PA3, AT91_PIN_PA4, AT91_PIN_PB11 };
+
+static struct resource spi1_resources[] = {
+ [0] = {
+ .start = AT91SAM9263_BASE_SPI1,
+ .end = AT91SAM9263_BASE_SPI1 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9263_ID_SPI1,
+ .end = AT91SAM9263_ID_SPI1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9263_spi1_device = {
+ .name = "atmel_spi",
+ .id = 1,
+ .dev = {
+ .dma_mask = &spi_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .resource = spi1_resources,
+ .num_resources = ARRAY_SIZE(spi1_resources),
+};
+
+static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB15, AT91_PIN_PB16, AT91_PIN_PB17, AT91_PIN_PB18 };
+
+void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
+{
+ int i;
+ unsigned long cs_pin;
+ short enable_spi0 = 0;
+ short enable_spi1 = 0;
+
+ /* Choose SPI chip-selects */
+ for (i = 0; i < nr_devices; i++) {
+ if (devices[i].controller_data)
+ cs_pin = (unsigned long) devices[i].controller_data;
+ else if (devices[i].bus_num == 0)
+ cs_pin = spi0_standard_cs[devices[i].chip_select];
+ else
+ cs_pin = spi1_standard_cs[devices[i].chip_select];
+
+ if (devices[i].bus_num == 0)
+ enable_spi0 = 1;
+ else
+ enable_spi1 = 1;
+
+ /* enable chip-select pin */
+ at91_set_gpio_output(cs_pin, 1);
+
+ /* pass chip-select pin to driver */
+ devices[i].controller_data = (void *) cs_pin;
+ }
+
+ spi_register_board_info(devices, nr_devices);
+
+ /* Configure SPI bus(es) */
+ if (enable_spi0) {
+ at91_set_B_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */
+ at91_set_B_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */
+ at91_set_B_periph(AT91_PIN_PA2, 0); /* SPI1_SPCK */
+
+ at91_clock_associate("spi0_clk", &at91sam9263_spi0_device.dev, "spi_clk");
+ platform_device_register(&at91sam9263_spi0_device);
+ }
+ if (enable_spi1) {
+ at91_set_A_periph(AT91_PIN_PB12, 0); /* SPI1_MISO */
+ at91_set_A_periph(AT91_PIN_PB13, 0); /* SPI1_MOSI */
+ at91_set_A_periph(AT91_PIN_PB14, 0); /* SPI1_SPCK */
+
+ at91_clock_associate("spi1_clk", &at91sam9263_spi1_device.dev, "spi_clk");
+ platform_device_register(&at91sam9263_spi1_device);
+ }
+}
+#else
+void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * LEDs
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_LEDS)
+u8 at91_leds_cpu;
+u8 at91_leds_timer;
+
+void __init at91_init_leds(u8 cpu_led, u8 timer_led)
+{
+ /* Enable GPIO to access the LEDs */
+ at91_set_gpio_output(cpu_led, 1);
+ at91_set_gpio_output(timer_led, 1);
+
+ at91_leds_cpu = cpu_led;
+ at91_leds_timer = timer_led;
+}
+#else
+void __init at91_init_leds(u8 cpu_led, u8 timer_led) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * UART
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_SERIAL_ATMEL)
+
+static struct resource dbgu_resources[] = {
+ [0] = {
+ .start = AT91_VA_BASE_SYS + AT91_DBGU,
+ .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91_ID_SYS,
+ .end = AT91_ID_SYS,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct atmel_uart_data dbgu_data = {
+ .use_dma_tx = 0,
+ .use_dma_rx = 0, /* DBGU not capable of receive DMA */
+ .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
+};
+
+static struct platform_device at91sam9263_dbgu_device = {
+ .name = "atmel_usart",
+ .id = 0,
+ .dev = {
+ .platform_data = &dbgu_data,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .resource = dbgu_resources,
+ .num_resources = ARRAY_SIZE(dbgu_resources),
+};
+
+static inline void configure_dbgu_pins(void)
+{
+ at91_set_A_periph(AT91_PIN_PC30, 0); /* DRXD */
+ at91_set_A_periph(AT91_PIN_PC31, 1); /* DTXD */
+}
+
+static struct resource uart0_resources[] = {
+ [0] = {
+ .start = AT91SAM9263_BASE_US0,
+ .end = AT91SAM9263_BASE_US0 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9263_ID_US0,
+ .end = AT91SAM9263_ID_US0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct atmel_uart_data uart0_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+};
+
+static struct platform_device at91sam9263_uart0_device = {
+ .name = "atmel_usart",
+ .id = 1,
+ .dev = {
+ .platform_data = &uart0_data,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .resource = uart0_resources,
+ .num_resources = ARRAY_SIZE(uart0_resources),
+};
+
+static inline void configure_usart0_pins(void)
+{
+ at91_set_A_periph(AT91_PIN_PA26, 1); /* TXD0 */
+ at91_set_A_periph(AT91_PIN_PA27, 0); /* RXD0 */
+ at91_set_A_periph(AT91_PIN_PA28, 0); /* RTS0 */
+ at91_set_A_periph(AT91_PIN_PA29, 0); /* CTS0 */
+}
+
+static struct resource uart1_resources[] = {
+ [0] = {
+ .start = AT91SAM9263_BASE_US1,
+ .end = AT91SAM9263_BASE_US1 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9263_ID_US1,
+ .end = AT91SAM9263_ID_US1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct atmel_uart_data uart1_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+};
+
+static struct platform_device at91sam9263_uart1_device = {
+ .name = "atmel_usart",
+ .id = 2,
+ .dev = {
+ .platform_data = &uart1_data,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .resource = uart1_resources,
+ .num_resources = ARRAY_SIZE(uart1_resources),
+};
+
+static inline void configure_usart1_pins(void)
+{
+ at91_set_A_periph(AT91_PIN_PD0, 1); /* TXD1 */
+ at91_set_A_periph(AT91_PIN_PD1, 0); /* RXD1 */
+ at91_set_B_periph(AT91_PIN_PD7, 0); /* RTS1 */
+ at91_set_B_periph(AT91_PIN_PD8, 0); /* CTS1 */
+}
+
+static struct resource uart2_resources[] = {
+ [0] = {
+ .start = AT91SAM9263_BASE_US2,
+ .end = AT91SAM9263_BASE_US2 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9263_ID_US2,
+ .end = AT91SAM9263_ID_US2,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct atmel_uart_data uart2_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+};
+
+static struct platform_device at91sam9263_uart2_device = {
+ .name = "atmel_usart",
+ .id = 3,
+ .dev = {
+ .platform_data = &uart2_data,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .resource = uart2_resources,
+ .num_resources = ARRAY_SIZE(uart2_resources),
+};
+
+static inline void configure_usart2_pins(void)
+{
+ at91_set_A_periph(AT91_PIN_PD2, 1); /* TXD2 */
+ at91_set_A_periph(AT91_PIN_PD3, 0); /* RXD2 */
+ at91_set_B_periph(AT91_PIN_PD5, 0); /* RTS2 */
+ at91_set_B_periph(AT91_PIN_PD6, 0); /* CTS2 */
+}
+
+struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
+struct platform_device *atmel_default_console_device; /* the serial console device */
+
+void __init at91_init_serial(struct at91_uart_config *config)
+{
+ int i;
+
+ /* Fill in list of supported UARTs */
+ for (i = 0; i < config->nr_tty; i++) {
+ switch (config->tty_map[i]) {
+ case 0:
+ configure_usart0_pins();
+ at91_uarts[i] = &at91sam9263_uart0_device;
+ at91_clock_associate("usart0_clk", &at91sam9263_uart0_device.dev, "usart");
+ break;
+ case 1:
+ configure_usart1_pins();
+ at91_uarts[i] = &at91sam9263_uart1_device;
+ at91_clock_associate("usart1_clk", &at91sam9263_uart1_device.dev, "usart");
+ break;
+ case 2:
+ configure_usart2_pins();
+ at91_uarts[i] = &at91sam9263_uart2_device;
+ at91_clock_associate("usart2_clk", &at91sam9263_uart2_device.dev, "usart");
+ break;
+ case 3:
+ configure_dbgu_pins();
+ at91_uarts[i] = &at91sam9263_dbgu_device;
+ at91_clock_associate("mck", &at91sam9263_dbgu_device.dev, "usart");
+ break;
+ default:
+ continue;
+ }
+ at91_uarts[i]->id = i; /* update ID number to mapped ID */
+ }
+
+ /* Set serial console device */
+ if (config->console_tty < ATMEL_MAX_UART)
+ atmel_default_console_device = at91_uarts[config->console_tty];
+ if (!atmel_default_console_device)
+ printk(KERN_INFO "AT91: No default serial console defined.\n");
+}
+
+void __init at91_add_device_serial(void)
+{
+ int i;
+
+ for (i = 0; i < ATMEL_MAX_UART; i++) {
+ if (at91_uarts[i])
+ platform_device_register(at91_uarts[i]);
+ }
+}
+#else
+void __init at91_init_serial(struct at91_uart_config *config) {}
+void __init at91_add_device_serial(void) {}
+#endif
+
+
+/* -------------------------------------------------------------------- */
+/*
+ * These devices are always present and don't need any board-specific
+ * setup.
+ */
+static int __init at91_add_standard_devices(void)
+{
+ return 0;
+}
+
+arch_initcall(at91_add_standard_devices);
--- /dev/null
+/*
+ * include/asm-arm/arch-at91/at91sam9263_matrix.h
+ *
+ * Copyright (C) 2006 Atmel Corporation.
+ *
+ * Memory Controllers (MATRIX, EBI) - System peripherals registers.
+ * Based on AT91SAM9263 datasheet revision B (Preliminary).
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM9263_MATRIX_H
+#define AT91SAM9263_MATRIX_H
+
+#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */
+#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */
+#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */
+#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */
+#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */
+#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */
+#define AT91_MATRIX_MCFG6 (AT91_MATRIX + 0x18) /* Master Configuration Register 6 */
+#define AT91_MATRIX_MCFG7 (AT91_MATRIX + 0x1C) /* Master Configuration Register 7 */
+#define AT91_MATRIX_MCFG8 (AT91_MATRIX + 0x20) /* Master Configuration Register 8 */
+#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */
+#define AT91_MATRIX_ULBT_INFINITE (0 << 0)
+#define AT91_MATRIX_ULBT_SINGLE (1 << 0)
+#define AT91_MATRIX_ULBT_FOUR (2 << 0)
+#define AT91_MATRIX_ULBT_EIGHT (3 << 0)
+#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0)
+
+#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */
+#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */
+#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */
+#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */
+#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */
+#define AT91_MATRIX_SCFG5 (AT91_MATRIX + 0x54) /* Slave Configuration Register 5 */
+#define AT91_MATRIX_SCFG6 (AT91_MATRIX + 0x58) /* Slave Configuration Register 6 */
+#define AT91_MATRIX_SCFG7 (AT91_MATRIX + 0x5C) /* Slave Configuration Register 7 */
+#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */
+#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */
+#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
+#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16)
+#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
+#define AT91_MATRIX_FIXED_DEFMSTR (7 << 18) /* Fixed Index of Default Master */
+#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */
+#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24)
+#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24)
+
+#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */
+#define AT91_MATRIX_PRBS0 (AT91_MATRIX + 0x84) /* Priority Register B for Slave 0 */
+#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */
+#define AT91_MATRIX_PRBS1 (AT91_MATRIX + 0x8C) /* Priority Register B for Slave 1 */
+#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */
+#define AT91_MATRIX_PRBS2 (AT91_MATRIX + 0x94) /* Priority Register B for Slave 2 */
+#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */
+#define AT91_MATRIX_PRBS3 (AT91_MATRIX + 0x9C) /* Priority Register B for Slave 3 */
+#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */
+#define AT91_MATRIX_PRBS4 (AT91_MATRIX + 0xA4) /* Priority Register B for Slave 4 */
+#define AT91_MATRIX_PRAS5 (AT91_MATRIX + 0xA8) /* Priority Register A for Slave 5 */
+#define AT91_MATRIX_PRBS5 (AT91_MATRIX + 0xAC) /* Priority Register B for Slave 5 */
+#define AT91_MATRIX_PRAS6 (AT91_MATRIX + 0xB0) /* Priority Register A for Slave 6 */
+#define AT91_MATRIX_PRBS6 (AT91_MATRIX + 0xB4) /* Priority Register B for Slave 6 */
+#define AT91_MATRIX_PRAS7 (AT91_MATRIX + 0xB8) /* Priority Register A for Slave 7 */
+#define AT91_MATRIX_PRBS7 (AT91_MATRIX + 0xBC) /* Priority Register B for Slave 7 */
+#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */
+#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */
+#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */
+#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */
+#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */
+#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */
+#define AT91_MATRIX_M6PR (3 << 24) /* Master 6 Priority */
+#define AT91_MATRIX_M7PR (3 << 28) /* Master 7 Priority */
+#define AT91_MATRIX_M8PR (3 << 0) /* Master 8 Priority (in Register B) */
+
+#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */
+#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
+#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
+#define AT91_MATRIX_RCB2 (1 << 2)
+#define AT91_MATRIX_RCB3 (1 << 3)
+#define AT91_MATRIX_RCB4 (1 << 4)
+#define AT91_MATRIX_RCB5 (1 << 5)
+#define AT91_MATRIX_RCB6 (1 << 6)
+#define AT91_MATRIX_RCB7 (1 << 7)
+#define AT91_MATRIX_RCB8 (1 << 8)
+
+#define AT91_MATRIX_TCMR (AT91_MATRIX + 0x114) /* TCM Configuration Register */
+#define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */
+#define AT91_MATRIX_ITCM_0 (0 << 0)
+#define AT91_MATRIX_ITCM_16 (5 << 0)
+#define AT91_MATRIX_ITCM_32 (6 << 0)
+#define AT91_MATRIX_DTCM_SIZE (0xf << 4) /* Size of DTCM enabled memory block */
+#define AT91_MATRIX_DTCM_0 (0 << 4)
+#define AT91_MATRIX_DTCM_16 (5 << 4)
+#define AT91_MATRIX_DTCM_32 (6 << 4)
+
+#define AT91_MATRIX_EBI0CSA (AT91_MATRIX + 0x120) /* EBI0 Chip Select Assignment Register */
+#define AT91_MATRIX_EBI0_CS1A (1 << 1) /* Chip Select 1 Assignment */
+#define AT91_MATRIX_EBI0_CS1A_SMC (0 << 1)
+#define AT91_MATRIX_EBI0_CS1A_SDRAMC (1 << 1)
+#define AT91_MATRIX_EBI0_CS3A (1 << 3) /* Chip Select 3 Assignment */
+#define AT91_MATRIX_EBI0_CS3A_SMC (0 << 3)
+#define AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA (1 << 3)
+#define AT91_MATRIX_EBI0_CS4A (1 << 4) /* Chip Select 4 Assignment */
+#define AT91_MATRIX_EBI0_CS4A_SMC (0 << 4)
+#define AT91_MATRIX_EBI0_CS4A_SMC_CF1 (1 << 4)
+#define AT91_MATRIX_EBI0_CS5A (1 << 5) /* Chip Select 5 Assignment */
+#define AT91_MATRIX_EBI0_CS5A_SMC (0 << 5)
+#define AT91_MATRIX_EBI0_CS5A_SMC_CF2 (1 << 5)
+#define AT91_MATRIX_EBI0_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
+#define AT91_MATRIX_EBI0_VDDIOMSEL (1 << 16) /* Memory voltage selection */
+#define AT91_MATRIX_EBI0_VDDIOMSEL_1_8V (0 << 16)
+#define AT91_MATRIX_EBI0_VDDIOMSEL_3_3V (1 << 16)
+
+#define AT91_MATRIX_EBI1CSA (AT91_MATRIX + 0x124) /* EBI1 Chip Select Assignment Register */
+#define AT91_MATRIX_EBI1_CS1A (1 << 1) /* Chip Select 1 Assignment */
+#define AT91_MATRIX_EBI1_CS1A_SMC (0 << 1)
+#define AT91_MATRIX_EBI1_CS1A_SDRAMC (1 << 1)
+#define AT91_MATRIX_EBI1_CS2A (1 << 3) /* Chip Select 3 Assignment */
+#define AT91_MATRIX_EBI1_CS2A_SMC (0 << 3)
+#define AT91_MATRIX_EBI1_CS2A_SMC_SMARTMEDIA (1 << 3)
+#define AT91_MATRIX_EBI1_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
+#define AT91_MATRIX_EBI1_VDDIOMSEL (1 << 16) /* Memory voltage selection */
+#define AT91_MATRIX_EBI1_VDDIOMSEL_1_8V (0 << 16)
+#define AT91_MATRIX_EBI1_VDDIOMSEL_3_3V (1 << 16)
+
+#endif
projects / GitHub / exynos8895 / android_kernel_samsung_universal8895.git / commitdiff