[media] dib7090: add the reference board TFE7790E

The intend of this patch is to add the support for the DiBcom reference
board TFE7790E.

Signed-off-by: Olivier Grenie <olivier.grenie@dibcom.fr>
Signed-off-by: Patrick Boettcher <patrick.boettcher@dibcom.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c
index d82740a8569a5c2aa60cd62f8110fccae7f45848..845b11acfb5957ec393e372a6427779d7588e98b 100644 (file)
--- a/drivers/media/dvb/dvb-usb/dib0700_devices.c
+++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c
@@ -2428,6 +2428,71 @@ static const struct dib0090_config tfe7090e_dib0090_config = {
        .is_dib7090e = 1,
 };
 
+static struct dib7000p_config tfe7790e_dib7000p_config = {
+       .output_mpeg2_in_188_bytes  = 1,
+       .hostbus_diversity                      = 1,
+       .tuner_is_baseband                      = 1,
+       .update_lna                                     = dib7090e_update_lna,
+
+       .agc_config_count                       = 2,
+       .agc                                            = dib7090_agc_config,
+
+       .bw                                                     = &dib7090_clock_config_12_mhz,
+
+       .gpio_dir                                       = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
+       .gpio_val                                       = DIB7000P_GPIO_DEFAULT_VALUES,
+       .gpio_pwm_pos                           = DIB7000P_GPIO_DEFAULT_PWM_POS,
+
+       .pwm_freq_div                           = 0,
+
+       .agc_control                            = dib7090_agc_restart,
+
+       .spur_protect                           = 0,
+       .disable_sample_and_hold        = 0,
+       .enable_current_mirror          = 0,
+       .diversity_delay                        = 0,
+
+       .output_mode                            = OUTMODE_MPEG2_PAR_GATED_CLK,
+       .enMpegOutput                           = 1,
+};
+
+static const struct dib0090_config tfe7790e_dib0090_config = {
+       .io.clock_khz = 12000,
+       .io.pll_bypass = 0,
+       .io.pll_range = 0,
+       .io.pll_prediv = 3,
+       .io.pll_loopdiv = 6,
+       .io.adc_clock_ratio = 0,
+       .io.pll_int_loop_filt = 0,
+       .reset = dib7090_tuner_sleep,
+       .sleep = dib7090_tuner_sleep,
+
+       .freq_offset_khz_uhf = 0,
+       .freq_offset_khz_vhf = 0,
+
+       .get_adc_power = dib7090_get_adc_power,
+
+       .clkouttobamse = 1,
+       .analog_output = 0,
+
+       .wbd_vhf_offset = 0,
+       .wbd_cband_offset = 0,
+       .use_pwm_agc = 1,
+       .clkoutdrive = 0,
+
+       .fref_clock_ratio = 0,
+
+       .wbd = dib7090e_wbd_table,
+
+       .ls_cfg_pad_drv = 0,
+       .data_tx_drv = 0,
+       .low_if = NULL,
+       .in_soc = 1,
+       .force_cband_input = 1,
+       .is_dib7090e = 1,
+       .force_crystal_mode = 1,
+};
+
 static const struct dib0090_config tfe7090pvr_dib0090_config[2] = {
        {
                .io.clock_khz = 12000,
@@ -2646,6 +2711,54 @@ static int tfe7090e_frontend_attach(struct dvb_usb_adapter *adap)
        return adap->fe_adap[0].fe == NULL ?  -ENODEV : 0;
 }
 
+static int tfe7790e_frontend_attach(struct dvb_usb_adapter *adap)
+{
+       struct dib0700_state *st = adap->dev->priv;
+
+       /* The TFE7790E requires the dib0700 to not be in master mode */
+       st->disable_streaming_master_mode = 1;
+
+       dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
+       msleep(20);
+       dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
+       dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
+       dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
+       dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
+       msleep(20);
+       dib0700_ctrl_clock(adap->dev, 72, 1);
+       dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
+       msleep(20);
+       dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
+
+       if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap,
+                               1, 0x10, &tfe7790e_dib7000p_config) != 0) {
+               err("%s: dib7000p_i2c_enumeration failed.  Cannot continue\n",
+                               __func__);
+               return -ENODEV;
+       }
+       adap->fe_adap[0].fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap,
+                       0x80, &tfe7790e_dib7000p_config);
+
+       return adap->fe_adap[0].fe == NULL ?  -ENODEV : 0;
+}
+
+static int tfe7790e_tuner_attach(struct dvb_usb_adapter *adap)
+{
+       struct dib0700_adapter_state *st = adap->priv;
+       struct i2c_adapter *tun_i2c =
+               dib7090_get_i2c_tuner(adap->fe_adap[0].fe);
+
+       if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c,
+                               &tfe7790e_dib0090_config) == NULL)
+               return -ENODEV;
+
+       dib7000p_set_gpio(adap->fe_adap[0].fe, 8, 0, 1);
+
+       st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params;
+       adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib7090_agc_startup;
+       return 0;
+}
+
 static int tfe7090e_tuner_attach(struct dvb_usb_adapter *adap)
 {
        struct dib0700_adapter_state *st = adap->priv;
@@ -3120,6 +3233,7 @@ struct usb_device_id dib0700_usb_id_table[] = {
        { USB_DEVICE(USB_VID_PINNACLE,  USB_PID_PINNACLE_PCTV340E) },
        { USB_DEVICE(USB_VID_PINNACLE,  USB_PID_PINNACLE_PCTV340E_SE) },
        { USB_DEVICE(USB_VID_DIBCOM,    USB_PID_DIBCOM_TFE7090E) },
+       { USB_DEVICE(USB_VID_DIBCOM,    USB_PID_DIBCOM_TFE7790E) },
        { 0 }           /* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, dib0700_usb_id_table);
@@ -4215,6 +4329,46 @@ struct dvb_usb_device_properties dib0700_devices[] = {
                        },
                },
 
+               .rc.core = {
+                       .rc_interval      = DEFAULT_RC_INTERVAL,
+                       .rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
+                       .module_name      = "dib0700",
+                       .rc_query         = dib0700_rc_query_old_firmware,
+                       .allowed_protos   = RC_TYPE_RC5 |
+                                           RC_TYPE_RC6 |
+                                           RC_TYPE_NEC,
+                       .change_protocol  = dib0700_change_protocol,
+               },
+       }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+               .num_adapters = 1,
+               .adapter = {
+                       {
+                               .num_frontends = 1,
+                               .fe = {{
+                                       .caps  = DVB_USB_ADAP_HAS_PID_FILTER |
+                                               DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+                                       .pid_filter_count = 32,
+                                       .pid_filter = stk70x0p_pid_filter,
+                                       .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
+                                       .frontend_attach  = tfe7790e_frontend_attach,
+                                       .tuner_attach     = tfe7790e_tuner_attach,
+
+                                       DIB0700_DEFAULT_STREAMING_CONFIG(0x03),
+                               } },
+
+                               .size_of_priv =
+                                       sizeof(struct dib0700_adapter_state),
+                       },
+               },
+
+               .num_device_descs = 1,
+               .devices = {
+                       {   "DiBcom TFE7790E reference design",
+                               { &dib0700_usb_id_table[79], NULL },
+                               { NULL },
+                       },
+               },
+
                .rc.core = {
                        .rc_interval      = DEFAULT_RC_INTERVAL,
                        .rc_codes         = RC_MAP_DIB0700_RC5_TABLE,

diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
index 908a61627b83415a8a0740b866beb62a510b955c..3f437eb4c68f7c518fe896d684ace0442cb6f6a7 100644 (file)
--- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
+++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
@@ -114,6 +114,7 @@
 #define USB_PID_DIBCOM_NIM7090                         0x1bb2
 #define USB_PID_DIBCOM_TFE7090PVR                      0x1bb4
 #define USB_PID_DIBCOM_TFE7090E                                0x1bb7
+#define USB_PID_DIBCOM_TFE7790E                                0x1e6e
 #define USB_PID_DIBCOM_NIM9090M                                0x2383
 #define USB_PID_DIBCOM_NIM9090MD                       0x2384
 #define USB_PID_DPOSH_M9206_COLD                       0x9206