drm/i915: prepare pipe for YCBCR420 output
authorShashank Sharma <shashank.sharma@intel.com>
Mon, 24 Jul 2017 13:49:32 +0000 (19:19 +0530)
committerDaniel Vetter <daniel.vetter@ffwll.ch>
Thu, 27 Jul 2017 07:38:55 +0000 (09:38 +0200)
To get HDMI YCBCR420 output, the PIPEMISC register should be
programmed to:
- Generate YCBCR output (bit 11)
- In case of YCBCR420 outputs, it should be programmed in full
  blend mode to use the scaler in 5x3 ratio (bits 26 and 27)

This patch:
- Adds definition of these bits.
- Programs PIPEMISC for YCBCR420 outputs.
- Adds readouts to compare HW and SW states.

V2: rebase
V3: rebase
V4: rebase
V5: added r-b from Ander
V6: Handle only YCBCR420 outputs (ville)
V7: rebase
V8: Addressed review comments from Ville
    - Add readouts for state->ycbcr420 and 420 pixel_clock.
    - Handle warning due to mismatch in clock for ycbcr420 clock.
    - Rename PIPEMISC macros to match the Bspec.
    - Add a debug print stating if YCBCR 4:2:0 output enabled.
    Added r-b from Ville
V9: Addressed review comments from Imre:
    - Add 420 mode clock adjustment in intel_hdmi_mode_valid to
      prevent 420_only modes getting rejected for high clock.
    - Add port clock adjustment for ycbcr420 modes in ddi_get_clock
    - Rename macros as per Ville's suggestion.
    - Remove unnecessary wl changes.
V10: Added r-b from Imre
V11: Fixed faulty dotclock handling, and addressed missing comment
     from previous set of review comments (Imre)
V12: Fixed dotclock for 12bpc too, removed 420 check for GEN < 10

Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Reviewed-by: Ville Syrjala <ville.syrjala@linux.intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1500904172-31717-1-git-send-email-shashank.sharma@intel.com
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
drivers/gpu/drm/i915/i915_reg.h
drivers/gpu/drm/i915/intel_ddi.c
drivers/gpu/drm/i915/intel_display.c
drivers/gpu/drm/i915/intel_hdmi.c

index c83f1095cb2106f22d901c4545871831f625e266..67be8eb57065fd7ea39fffc86ad859afdcd9bdd0 100644 (file)
@@ -5252,6 +5252,9 @@ enum {
 
 #define _PIPE_MISC_A                   0x70030
 #define _PIPE_MISC_B                   0x71030
+#define   PIPEMISC_YUV420_ENABLE       (1<<27)
+#define   PIPEMISC_YUV420_MODE_FULL_BLEND (1<<26)
+#define   PIPEMISC_OUTPUT_COLORSPACE_YUV  (1<<11)
 #define   PIPEMISC_DITHER_BPC_MASK     (7<<5)
 #define   PIPEMISC_DITHER_8_BPC                (0<<5)
 #define   PIPEMISC_DITHER_10_BPC       (1<<5)
index efb13582dc73df7bbc3beed68c998bc4b09d5b79..4a0e35ede64306fc98b5ce125762934b3b1cfd0c 100644 (file)
@@ -1174,6 +1174,9 @@ static void ddi_dotclock_get(struct intel_crtc_state *pipe_config)
        else
                dotclock = pipe_config->port_clock;
 
+       if (pipe_config->ycbcr420)
+               dotclock *= 2;
+
        if (pipe_config->pixel_multiplier)
                dotclock /= pipe_config->pixel_multiplier;
 
index 77d811993423b111a6189c0440fb4c68911d22d1..146b8173e36545d0ec03cb5d0daa56847c75e561 100644 (file)
@@ -7933,6 +7933,7 @@ static void haswell_set_pipemisc(struct drm_crtc *crtc)
 {
        struct drm_i915_private *dev_priv = to_i915(crtc->dev);
        struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+       struct intel_crtc_state *config = intel_crtc->config;
 
        if (IS_BROADWELL(dev_priv) || INTEL_INFO(dev_priv)->gen >= 9) {
                u32 val = 0;
@@ -7958,6 +7959,12 @@ static void haswell_set_pipemisc(struct drm_crtc *crtc)
                if (intel_crtc->config->dither)
                        val |= PIPEMISC_DITHER_ENABLE | PIPEMISC_DITHER_TYPE_SP;
 
+               if (config->ycbcr420) {
+                       val |= PIPEMISC_OUTPUT_COLORSPACE_YUV |
+                               PIPEMISC_YUV420_ENABLE |
+                               PIPEMISC_YUV420_MODE_FULL_BLEND;
+               }
+
                I915_WRITE(PIPEMISC(intel_crtc->pipe), val);
        }
 }
@@ -9022,6 +9029,23 @@ static bool haswell_get_pipe_config(struct intel_crtc *crtc,
        pipe_config->gamma_mode =
                I915_READ(GAMMA_MODE(crtc->pipe)) & GAMMA_MODE_MODE_MASK;
 
+       if (IS_BROADWELL(dev_priv) || dev_priv->info.gen >= 9) {
+               u32 tmp = I915_READ(PIPEMISC(crtc->pipe));
+               bool clrspace_yuv = tmp & PIPEMISC_OUTPUT_COLORSPACE_YUV;
+
+               if (IS_GEMINILAKE(dev_priv) || dev_priv->info.gen >= 10) {
+                       bool blend_mode_420 = tmp &
+                                             PIPEMISC_YUV420_MODE_FULL_BLEND;
+
+                       pipe_config->ycbcr420 = tmp & PIPEMISC_YUV420_ENABLE;
+                       if (pipe_config->ycbcr420 != clrspace_yuv ||
+                           pipe_config->ycbcr420 != blend_mode_420)
+                               DRM_DEBUG_KMS("Bad 4:2:0 mode (%08x)\n", tmp);
+               } else if (clrspace_yuv) {
+                       DRM_DEBUG_KMS("YCbCr 4:2:0 Unsupported\n");
+               }
+       }
+
        power_domain = POWER_DOMAIN_PIPE_PANEL_FITTER(crtc->pipe);
        if (intel_display_power_get_if_enabled(dev_priv, power_domain)) {
                power_domain_mask |= BIT_ULL(power_domain);
@@ -10401,6 +10425,9 @@ static void intel_dump_pipe_config(struct intel_crtc *crtc,
                                      pipe_config->fdi_lanes,
                                      &pipe_config->fdi_m_n);
 
+       if (pipe_config->ycbcr420)
+               DRM_DEBUG_KMS("YCbCr 4:2:0 output enabled\n");
+
        if (intel_crtc_has_dp_encoder(pipe_config)) {
                intel_dump_m_n_config(pipe_config, "dp m_n",
                                pipe_config->lane_count, &pipe_config->dp_m_n);
index b62bd8251c2a84a8d8ae487808c278cc8618a8e1..b0b6dd19a70d4d1672eecb20da2fe58bd1a2f30e 100644 (file)
@@ -1295,6 +1295,9 @@ intel_hdmi_mode_valid(struct drm_connector *connector,
        if (mode->flags & DRM_MODE_FLAG_DBLCLK)
                clock *= 2;
 
+       if (drm_mode_is_420_only(&connector->display_info, mode))
+               clock /= 2;
+
        /* check if we can do 8bpc */
        status = hdmi_port_clock_valid(hdmi, clock, true, force_dvi);