/*
* arch/s390/kernel/head.S
*
- * (C) Copyright IBM Corp. 1999, 2005
+ * Copyright (C) IBM Corp. 1999,2006
*
* Author(s): Hartmut Penner <hp@de.ibm.com>
* Martin Schwidefsky <schwidefsky@de.ibm.com>
.macro GET_IPL_DEVICE
.Lget_ipl_device:
- basr %r12,0
-.LGID: l %r1,0xb8 # get sid
+ l %r1,0xb8 # get sid
sll %r1,15 # test if subchannel is enabled
srl %r1,31
ltr %r1,%r1
- bz 0(%r14) # subchannel disabled
+ bz 2f-.LPG1(%r13) # subchannel disabled
l %r1,0xb8
- la %r5,.Lipl_schib-.LGID(%r12)
+ la %r5,.Lipl_schib-.LPG1(%r13)
stsch 0(%r5) # get schib of subchannel
- bnz 0(%r14) # schib not available
+ bnz 2f-.LPG1(%r13) # schib not available
tm 5(%r5),0x01 # devno valid?
- bno 0(%r14)
- la %r6,ipl_parameter_flags-.LGID(%r12)
+ bno 2f-.LPG1(%r13)
+ la %r6,ipl_parameter_flags-.LPG1(%r13)
oi 3(%r6),0x01 # set flag
- la %r2,ipl_devno-.LGID(%r12)
+ la %r2,ipl_devno-.LPG1(%r13)
mvc 0(2,%r2),6(%r5) # store devno
tm 4(%r5),0x80 # qdio capable device?
- bno 0(%r14)
+ bno 2f-.LPG1(%r13)
oi 3(%r6),0x02 # set flag
# copy ipl parameters
ar %r2,%r1
sr %r0,%r4
jne 1b
- b 0(%r14)
+ b 2f-.LPG1(%r13)
.align 4
.Lipl_schib:
.globl ipl_devno
ipl_devno:
.word 0
+2:
.endm
#ifdef CONFIG_64BIT
/*
* arch/s390/kernel/head31.S
*
- * (C) Copyright IBM Corp. 2005
+ * Copyright (C) IBM Corp. 2005,2006
*
* Author(s): Hartmut Penner <hp@de.ibm.com>
* Martin Schwidefsky <schwidefsky@de.ibm.com>
# or linload or SALIPL
#
.org 0x10000
-startup:basr %r13,0 # get base
-.LPG1: l %r1, .Lget_ipl_device_addr-.LPG1(%r13)
- basr %r14, %r1
+startup:basr %r13,0 # get base
+.LPG0: l %r13,0f-.LPG0(%r13)
+ b 0(%r13)
+0: .long startup_continue
+
+#
+# params at 10400 (setup.h)
+#
+ .org PARMAREA
+ .long 0,0 # IPL_DEVICE
+ .long 0,RAMDISK_ORIGIN # INITRD_START
+ .long 0,RAMDISK_SIZE # INITRD_SIZE
+
+ .org COMMAND_LINE
+ .byte "root=/dev/ram0 ro"
+ .byte 0
+
+ .org 0x11000
+
+startup_continue:
+ basr %r13,0 # get base
+.LPG1: GET_IPL_DEVICE
lctl %c0,%c15,.Lctl-.LPG1(%r13) # load control registers
- la %r12,_pstart-.LPG1(%r13) # pointer to parameter area
- # move IPL device to lowcore
+ l %r12,.Lparmaddr-.LPG1(%r13) # pointer to parameter area
+ # move IPL device to lowcore
mvc __LC_IPLDEV(4),IPL_DEVICE-PARMAREA(%r12)
#
a %r1,__LC_EXT_NEW_PSW+4 # set handler
st %r1,__LC_EXT_NEW_PSW+4
- la %r4,_pstart-.LPG1(%r13) # %r4 is our index for sccb stuff
- la %r1, .Lsccb-PARMAREA(%r4) # our sccb
+ l %r4,.Lsccbaddr-.LPG1(%r13) # %r4 is our index for sccb stuff
+ lr %r1,%r4 # our sccb
.insn rre,0xb2200000,%r2,%r1 # service call
ipm %r1
srl %r1,28 # get cc code
be .Lservicecall-.LPG1(%r13)
lpsw .Lwaitsclp-.LPG1(%r13)
.Lsclph:
- lh %r1,.Lsccbr-PARMAREA(%r4)
+ lh %r1,.Lsccbr-.Lsccb(%r4)
chi %r1,0x10 # 0x0010 is the sucess code
je .Lprocsccb # let's process the sccb
chi %r1,0x1f0
b .Lservicecall-.LPG1(%r13)
.Lprocsccb:
lhi %r1,0
- icm %r1,3,.Lscpincr1-PARMAREA(%r4) # use this one if != 0
+ icm %r1,3,.Lscpincr1-.Lsccb(%r4) # use this one if != 0
jnz .Lscnd
lhi %r1,0x800 # otherwise report 2GB
.Lscnd:
lr %r1,%r3
.Lno2gb:
xr %r3,%r3 # same logic
- ic %r3,.Lscpa1-PARMAREA(%r4)
+ ic %r3,.Lscpa1-.Lsccb(%r4)
chi %r3,0x00
jne .Lcompmem
- l %r3,.Lscpa2-PARMAREA(%r4)
+ l %r3,.Lscpa2-.Lsccb(%r4)
.Lcompmem:
mr %r2,%r1 # mem in MB on 128-bit
l %r1,.Lonemb-.LPG1(%r13)
b .Lfchunk-.LPG1(%r13)
.align 4
-.Lget_ipl_device_addr:
- .long .Lget_ipl_device
.Lpmask:
.byte 0
.align 8
.long 0 # cr13: home space segment table
.long 0xc0000000 # cr14: machine check handling off
.long 0 # cr15: linkage stack operations
+.Lduct: .long 0,0,0,0,0,0,0,0
+ .long 0,0,0,0,0,0,0,0
.Lpcmem:.long 0x00080000,0x80000000 + .Lchkmem
.Lpcfpu:.long 0x00080000,0x80000000 + .Lchkfpu
.Lpccsp:.long 0x00080000,0x80000000 + .Lchkcsp
.Lmflags:.long machine_flags
.Lbss_bgn: .long __bss_start
.Lbss_end: .long _end
-
- .org PARMAREA-64
-.Lduct: .long 0,0,0,0,0,0,0,0
- .long 0,0,0,0,0,0,0,0
-
-#
-# params at 10400 (setup.h)
-#
- .org PARMAREA
- .global _pstart
-_pstart:
- .long 0,0 # IPL_DEVICE
- .long 0,RAMDISK_ORIGIN # INITRD_START
- .long 0,RAMDISK_SIZE # INITRD_SIZE
-
- .org COMMAND_LINE
- .byte "root=/dev/ram0 ro"
- .byte 0
- .org 0x11000
+.Lparmaddr: .long PARMAREA
+.Lsccbaddr: .long .Lsccb
+ .align 4096
.Lsccb:
.hword 0x1000 # length, one page
.byte 0x00,0x00,0x00
.Lscpincr2:
.quad 0x00
.fill 3984,1,0
- .org 0x12000
- .global _pend
-_pend:
-
- GET_IPL_DEVICE
+ .align 4096
#ifdef CONFIG_SHARED_KERNEL
.org 0x100000
#endif
#
-# startup-code, running in virtual mode
+# startup-code, running in absolute addressing mode
#
.globl _stext
_stext: basr %r13,0 # get base
/*
* arch/s390/kernel/head64.S
*
- * (C) Copyright IBM Corp. 1999,2005
+ * Copyright (C) IBM Corp. 1999,2006
*
* Author(s): Hartmut Penner <hp@de.ibm.com>
* Martin Schwidefsky <schwidefsky@de.ibm.com>
# this is called either by the ipl loader or directly by PSW restart
# or linload or SALIPL
#
- .org 0x10000
-startup:basr %r13,0 # get base
+ .org 0x10000
+startup:basr %r13,0 # get base
+.LPG0: l %r13,0f-.LPG0(%r13)
+ b 0(%r13)
+0: .long startup_continue
+
+#
+# params at 10400 (setup.h)
+#
+ .org PARMAREA
+ .quad 0 # IPL_DEVICE
+ .quad RAMDISK_ORIGIN # INITRD_START
+ .quad RAMDISK_SIZE # INITRD_SIZE
+
+ .org COMMAND_LINE
+ .byte "root=/dev/ram0 ro"
+ .byte 0
+
+ .org 0x11000
+
+startup_continue:
+ basr %r13,0 # get base
.LPG1: sll %r13,1 # remove high order bit
srl %r13,1
- l %r1,.Lget_ipl_device_addr-.LPG1(%r13)
- basr %r14,%r1
+ GET_IPL_DEVICE
lhi %r1,1 # mode 1 = esame
slr %r0,%r0 # set cpuid to zero
sigp %r1,%r0,0x12 # switch to esame mode
sam64 # switch to 64 bit mode
lctlg %c0,%c15,.Lctl-.LPG1(%r13) # load control registers
- larl %r12,_pstart # pointer to parameter area
+ lg %r12,.Lparmaddr-.LPG1(%r13)# pointer to parameter area
# move IPL device to lowcore
mvc __LC_IPLDEV(4),IPL_DEVICE+4-PARMAREA(%r12)
larl %r1,.Lsclph
stg %r1,__LC_EXT_NEW_PSW+8 # set handler
- larl %r4,_pstart # %r4 is our index for sccb stuff
- la %r1,.Lsccb-PARMAREA(%r4) # our sccb
+ larl %r4,.Lsccb # %r4 is our index for sccb stuff
+ lgr %r1,%r4 # our sccb
.insn rre,0xb2200000,%r2,%r1 # service call
ipm %r1
srl %r1,28 # get cc code
be .Lservicecall-.LPG1(%r13)
lpswe .Lwaitsclp-.LPG1(%r13)
.Lsclph:
- lh %r1,.Lsccbr-PARMAREA(%r4)
+ lh %r1,.Lsccbr-.Lsccb(%r4)
chi %r1,0x10 # 0x0010 is the sucess code
je .Lprocsccb # let's process the sccb
chi %r1,0x1f0
b .Lservicecall-.LPG1(%r13)
.Lprocsccb:
lghi %r1,0
- icm %r1,3,.Lscpincr1-PARMAREA(%r4) # use this one if != 0
+ icm %r1,3,.Lscpincr1-.Lsccb(%r4) # use this one if != 0
jnz .Lscnd
- lg %r1,.Lscpincr2-PARMAREA(%r4) # otherwise use this one
+ lg %r1,.Lscpincr2-.Lsccb(%r4) # otherwise use this one
.Lscnd:
xr %r3,%r3 # same logic
- ic %r3,.Lscpa1-PARMAREA(%r4)
+ ic %r3,.Lscpa1-.Lsccb(%r4)
chi %r3,0x00
jne .Lcompmem
- l %r3,.Lscpa2-PARMAREA(%r4)
+ l %r3,.Lscpa2-.Lsccb(%r4)
.Lcompmem:
mlgr %r2,%r1 # mem in MB on 128-bit
l %r1,.Lonemb-.LPG1(%r13)
b .Lfchunk-.LPG1(%r13)
.align 4
-.Lget_ipl_device_addr:
- .long .Lget_ipl_device
.Lpmask:
.byte 0
.align 8
.quad 0 # cr13: home space segment table
.quad 0xc0000000 # cr14: machine check handling off
.quad 0 # cr15: linkage stack operations
+.Lduct: .long 0,0,0,0,0,0,0,0
+ .long 0,0,0,0,0,0,0,0
.Lpcmsk:.quad 0x0000000180000000
.L4malign:.quad 0xffffffffffc00000
.Lscan2g:.quad 0x80000000 + 0x20000 - 8 # 2GB + 128K - 8
.Lnop: .long 0x07000700
+.Lparmaddr:
+ .quad PARMAREA
- .org PARMAREA-64
-.Lduct: .long 0,0,0,0,0,0,0,0
- .long 0,0,0,0,0,0,0,0
-
-#
-# params at 10400 (setup.h)
-#
- .org PARMAREA
- .global _pstart
-_pstart:
- .quad 0 # IPL_DEVICE
- .quad RAMDISK_ORIGIN # INITRD_START
- .quad RAMDISK_SIZE # INITRD_SIZE
-
- .org COMMAND_LINE
- .byte "root=/dev/ram0 ro"
- .byte 0
- .org 0x11000
+ .align 4096
.Lsccb:
.hword 0x1000 # length, one page
.byte 0x00,0x00,0x00
.Lscpincr2:
.quad 0x00
.fill 3984,1,0
- .org 0x12000
- .global _pend
-_pend:
-
- GET_IPL_DEVICE
+ .align 4096
#ifdef CONFIG_SHARED_KERNEL
.org 0x100000
#endif
#
-# startup-code, running in virtual mode
+# startup-code, running in absolute addressing mode
#
.globl _stext
_stext: basr %r13,0 # get base
.align 8
.Ldw: .quad 0x0002000180000000,0x0000000000000000
.Laregs: .long 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
-
projects / GitHub / LineageOS / android_kernel_samsung_universal7580.git / commitdiff