source "drivers/staging/octeon/Kconfig"
+source "drivers/staging/octeon-usb/Kconfig"
+
source "drivers/staging/serqt_usb2/Kconfig"
source "drivers/staging/vt6655/Kconfig"
obj-$(CONFIG_NETLOGIC_XLR_NET) += netlogic/
obj-$(CONFIG_USB_SERIAL_QUATECH2) += serqt_usb2/
obj-$(CONFIG_OCTEON_ETHERNET) += octeon/
+obj-$(CONFIG_OCTEON_USB) += octeon-usb/
obj-$(CONFIG_VT6655) += vt6655/
obj-$(CONFIG_VT6656) += vt6656/
obj-$(CONFIG_VME_BUS) += vme/
--- /dev/null
+config OCTEON_USB
+ tristate "Cavium Networks Octeon USB support"
+ depends on CPU_CAVIUM_OCTEON && USB
+ help
+ This driver supports USB host controller on some Cavium
+ Networks' products in the Octeon family.
+
+ To compile this driver as a module, choose M here. The module
+ will be called octeon-usb.
+
--- /dev/null
+obj-${CONFIG_OCTEON_USB} := octeon-usb.o
+octeon-usb-y := octeon-hcd.o
+octeon-usb-y += cvmx-usb.o
--- /dev/null
+This driver is functional and has been tested on EdgeRouter Lite with
+USB mass storage.
+
+TODO:
+ - kernel coding style
+ - checkpatch warnings
+ - dead code elimination
+ - device tree bindings
+ - possibly eliminate the extra "hardware abstraction layer"
+
+Contact: Aaro Koskinen <aaro.koskinen@iki.fi>
--- /dev/null
+/***********************license start***************
+ * Copyright (c) 2003-2010 Cavium Networks (support@cavium.com). All rights
+ * reserved.
+ *
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ *
+ * * Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials provided
+ * with the distribution.
+
+ * * Neither the name of Cavium Networks nor the names of
+ * its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written
+ * permission.
+
+ * This Software, including technical data, may be subject to U.S. export control
+ * laws, including the U.S. Export Administration Act and its associated
+ * regulations, and may be subject to export or import regulations in other
+ * countries.
+
+ * TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE SOFTWARE IS PROVIDED "AS IS"
+ * AND WITH ALL FAULTS AND CAVIUM NETWORKS MAKES NO PROMISES, REPRESENTATIONS OR
+ * WARRANTIES, EITHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, WITH RESPECT TO
+ * THE SOFTWARE, INCLUDING ITS CONDITION, ITS CONFORMITY TO ANY REPRESENTATION OR
+ * DESCRIPTION, OR THE EXISTENCE OF ANY LATENT OR PATENT DEFECTS, AND CAVIUM
+ * SPECIFICALLY DISCLAIMS ALL IMPLIED (IF ANY) WARRANTIES OF TITLE,
+ * MERCHANTABILITY, NONINFRINGEMENT, FITNESS FOR A PARTICULAR PURPOSE, LACK OF
+ * VIRUSES, ACCURACY OR COMPLETENESS, QUIET ENJOYMENT, QUIET POSSESSION OR
+ * CORRESPONDENCE TO DESCRIPTION. THE ENTIRE RISK ARISING OUT OF USE OR
+ * PERFORMANCE OF THE SOFTWARE LIES WITH YOU.
+ ***********************license end**************************************/
+
+
+/**
+ * @file
+ *
+ * "cvmx-usb.c" defines a set of low level USB functions to help
+ * developers create Octeon USB drivers for various operating
+ * systems. These functions provide a generic API to the Octeon
+ * USB blocks, hiding the internal hardware specific
+ * operations.
+ *
+ * <hr>$Revision: 32636 $<hr>
+ */
+#include <linux/delay.h>
+#include <asm/octeon/cvmx.h>
+#include <asm/octeon/octeon.h>
+#include <asm/octeon/cvmx-sysinfo.h>
+#include "cvmx-usbnx-defs.h"
+#include "cvmx-usbcx-defs.h"
+#include "cvmx-usb.h"
+#include <asm/octeon/cvmx-helper.h>
+#include <asm/octeon/cvmx-helper-board.h>
+
+#define CVMX_PREFETCH0(address) CVMX_PREFETCH(address, 0)
+#define CVMX_PREFETCH128(address) CVMX_PREFETCH(address, 128)
+// a normal prefetch
+#define CVMX_PREFETCH(address, offset) CVMX_PREFETCH_PREF0(address, offset)
+// normal prefetches that use the pref instruction
+#define CVMX_PREFETCH_PREFX(X, address, offset) asm volatile ("pref %[type], %[off](%[rbase])" : : [rbase] "d" (address), [off] "I" (offset), [type] "n" (X))
+#define CVMX_PREFETCH_PREF0(address, offset) CVMX_PREFETCH_PREFX(0, address, offset)
+#define CVMX_CLZ(result, input) asm ("clz %[rd],%[rs]" : [rd] "=d" (result) : [rs] "d" (input))
+
+#define cvmx_likely likely
+#define cvmx_wait_usec udelay
+#define cvmx_unlikely unlikely
+#define cvmx_le16_to_cpu le16_to_cpu
+
+#define MAX_RETRIES 3 /* Maximum number of times to retry failed transactions */
+#define MAX_PIPES 32 /* Maximum number of pipes that can be open at once */
+#define MAX_TRANSACTIONS 256 /* Maximum number of outstanding transactions across all pipes */
+#define MAX_CHANNELS 8 /* Maximum number of hardware channels supported by the USB block */
+#define MAX_USB_ADDRESS 127 /* The highest valid USB device address */
+#define MAX_USB_ENDPOINT 15 /* The highest valid USB endpoint number */
+#define MAX_USB_HUB_PORT 15 /* The highest valid port number on a hub */
+#define MAX_TRANSFER_BYTES ((1<<19)-1) /* The low level hardware can transfer a maximum of this number of bytes in each transfer. The field is 19 bits wide */
+#define MAX_TRANSFER_PACKETS ((1<<10)-1) /* The low level hardware can transfer a maximum of this number of packets in each transfer. The field is 10 bits wide */
+
+/* These defines disable the normal read and write csr. This is so I can add
+ extra debug stuff to the usb specific version and I won't use the normal
+ version by mistake */
+#define cvmx_read_csr use_cvmx_usb_read_csr64_instead_of_cvmx_read_csr
+#define cvmx_write_csr use_cvmx_usb_write_csr64_instead_of_cvmx_write_csr
+
+typedef enum
+{
+ __CVMX_USB_TRANSACTION_FLAGS_IN_USE = 1<<16,
+} cvmx_usb_transaction_flags_t;
+
+enum {
+ USB_CLOCK_TYPE_REF_12,
+ USB_CLOCK_TYPE_REF_24,
+ USB_CLOCK_TYPE_REF_48,
+ USB_CLOCK_TYPE_CRYSTAL_12,
+};
+
+/**
+ * Logical transactions may take numerous low level
+ * transactions, especially when splits are concerned. This
+ * enum represents all of the possible stages a transaction can
+ * be in. Note that split completes are always even. This is so
+ * the NAK handler can backup to the previous low level
+ * transaction with a simple clearing of bit 0.
+ */
+typedef enum
+{
+ CVMX_USB_STAGE_NON_CONTROL,
+ CVMX_USB_STAGE_NON_CONTROL_SPLIT_COMPLETE,
+ CVMX_USB_STAGE_SETUP,
+ CVMX_USB_STAGE_SETUP_SPLIT_COMPLETE,
+ CVMX_USB_STAGE_DATA,
+ CVMX_USB_STAGE_DATA_SPLIT_COMPLETE,
+ CVMX_USB_STAGE_STATUS,
+ CVMX_USB_STAGE_STATUS_SPLIT_COMPLETE,
+} cvmx_usb_stage_t;
+
+/**
+ * This structure describes each pending USB transaction
+ * regardless of type. These are linked together to form a list
+ * of pending requests for a pipe.
+ */
+typedef struct cvmx_usb_transaction
+{
+ struct cvmx_usb_transaction *prev; /**< Transaction before this one in the pipe */
+ struct cvmx_usb_transaction *next; /**< Transaction after this one in the pipe */
+ cvmx_usb_transfer_t type; /**< Type of transaction, duplicated of the pipe */
+ cvmx_usb_transaction_flags_t flags; /**< State flags for this transaction */
+ uint64_t buffer; /**< User's physical buffer address to read/write */
+ int buffer_length; /**< Size of the user's buffer in bytes */
+ uint64_t control_header; /**< For control transactions, physical address of the 8 byte standard header */
+ int iso_start_frame; /**< For ISO transactions, the starting frame number */
+ int iso_number_packets; /**< For ISO transactions, the number of packets in the request */
+ cvmx_usb_iso_packet_t *iso_packets; /**< For ISO transactions, the sub packets in the request */
+ int xfersize;
+ int pktcnt;
+ int retries;
+ int actual_bytes; /**< Actual bytes transfer for this transaction */
+ cvmx_usb_stage_t stage; /**< For control transactions, the current stage */
+ cvmx_usb_callback_func_t callback; /**< User's callback function when complete */
+ void *callback_data; /**< User's data */
+} cvmx_usb_transaction_t;
+
+/**
+ * A pipe represents a virtual connection between Octeon and some
+ * USB device. It contains a list of pending request to the device.
+ */
+typedef struct cvmx_usb_pipe
+{
+ struct cvmx_usb_pipe *prev; /**< Pipe before this one in the list */
+ struct cvmx_usb_pipe *next; /**< Pipe after this one in the list */
+ cvmx_usb_transaction_t *head; /**< The first pending transaction */
+ cvmx_usb_transaction_t *tail; /**< The last pending transaction */
+ uint64_t interval; /**< For periodic pipes, the interval between packets in frames */
+ uint64_t next_tx_frame; /**< The next frame this pipe is allowed to transmit on */
+ cvmx_usb_pipe_flags_t flags; /**< State flags for this pipe */
+ cvmx_usb_speed_t device_speed; /**< Speed of device connected to this pipe */
+ cvmx_usb_transfer_t transfer_type; /**< Type of transaction supported by this pipe */
+ cvmx_usb_direction_t transfer_dir; /**< IN or OUT. Ignored for Control */
+ int multi_count; /**< Max packet in a row for the device */
+ uint16_t max_packet; /**< The device's maximum packet size in bytes */
+ uint8_t device_addr; /**< USB device address at other end of pipe */
+ uint8_t endpoint_num; /**< USB endpoint number at other end of pipe */
+ uint8_t hub_device_addr; /**< Hub address this device is connected to */
+ uint8_t hub_port; /**< Hub port this device is connected to */
+ uint8_t pid_toggle; /**< This toggles between 0/1 on every packet send to track the data pid needed */
+ uint8_t channel; /**< Hardware DMA channel for this pipe */
+ int8_t split_sc_frame; /**< The low order bits of the frame number the split complete should be sent on */
+} cvmx_usb_pipe_t;
+
+typedef struct
+{
+ cvmx_usb_pipe_t *head; /**< Head of the list, or NULL if empty */
+ cvmx_usb_pipe_t *tail; /**< Tail if the list, or NULL if empty */
+} cvmx_usb_pipe_list_t;
+
+typedef struct
+{
+ struct
+ {
+ int channel;
+ int size;
+ uint64_t address;
+ } entry[MAX_CHANNELS+1];
+ int head;
+ int tail;
+} cvmx_usb_tx_fifo_t;
+
+/**
+ * The state of the USB block is stored in this structure
+ */
+typedef struct
+{
+ int init_flags; /**< Flags passed to initialize */
+ int index; /**< Which USB block this is for */
+ int idle_hardware_channels; /**< Bit set for every idle hardware channel */
+ cvmx_usbcx_hprt_t usbcx_hprt; /**< Stored port status so we don't need to read a CSR to determine splits */
+ cvmx_usb_pipe_t *pipe_for_channel[MAX_CHANNELS]; /**< Map channels to pipes */
+ cvmx_usb_transaction_t *free_transaction_head; /**< List of free transactions head */
+ cvmx_usb_transaction_t *free_transaction_tail; /**< List of free transactions tail */
+ cvmx_usb_pipe_t pipe[MAX_PIPES]; /**< Storage for pipes */
+ cvmx_usb_transaction_t transaction[MAX_TRANSACTIONS]; /**< Storage for transactions */
+ cvmx_usb_callback_func_t callback[__CVMX_USB_CALLBACK_END]; /**< User global callbacks */
+ void *callback_data[__CVMX_USB_CALLBACK_END]; /**< User data for each callback */
+ int indent; /**< Used by debug output to indent functions */
+ cvmx_usb_port_status_t port_status; /**< Last port status used for change notification */
+ cvmx_usb_pipe_list_t free_pipes; /**< List of all pipes that are currently closed */
+ cvmx_usb_pipe_list_t idle_pipes; /**< List of open pipes that have no transactions */
+ cvmx_usb_pipe_list_t active_pipes[4]; /**< Active pipes indexed by transfer type */
+ uint64_t frame_number; /**< Increments every SOF interrupt for time keeping */
+ cvmx_usb_transaction_t *active_split; /**< Points to the current active split, or NULL */
+ cvmx_usb_tx_fifo_t periodic;
+ cvmx_usb_tx_fifo_t nonperiodic;
+} cvmx_usb_internal_state_t;
+
+/* This macro logs out whenever a function is called if debugging is on */
+#define CVMX_USB_LOG_CALLED() \
+ if (cvmx_unlikely(usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_DEBUG_CALLS)) \
+ cvmx_dprintf("%*s%s: called\n", 2*usb->indent++, "", __FUNCTION__);
+
+/* This macro logs out each function parameter if debugging is on */
+#define CVMX_USB_LOG_PARAM(format, param) \
+ if (cvmx_unlikely(usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_DEBUG_CALLS)) \
+ cvmx_dprintf("%*s%s: param %s = " format "\n", 2*usb->indent, "", __FUNCTION__, #param, param);
+
+/* This macro logs out when a function returns a value */
+#define CVMX_USB_RETURN(v) \
+ do { \
+ typeof(v) r = v; \
+ if (cvmx_unlikely(usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_DEBUG_CALLS)) \
+ cvmx_dprintf("%*s%s: returned %s(%d)\n", 2*--usb->indent, "", __FUNCTION__, #v, r); \
+ return r; \
+ } while (0);
+
+/* This macro logs out when a function doesn't return a value */
+#define CVMX_USB_RETURN_NOTHING() \
+ do { \
+ if (cvmx_unlikely(usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_DEBUG_CALLS)) \
+ cvmx_dprintf("%*s%s: returned\n", 2*--usb->indent, "", __FUNCTION__); \
+ return; \
+ } while (0);
+
+/* This macro spins on a field waiting for it to reach a value */
+#define CVMX_WAIT_FOR_FIELD32(address, type, field, op, value, timeout_usec)\
+ ({int result; \
+ do { \
+ uint64_t done = cvmx_get_cycle() + (uint64_t)timeout_usec * \
+ octeon_get_clock_rate() / 1000000; \
+ type c; \
+ while (1) \
+ { \
+ c.u32 = __cvmx_usb_read_csr32(usb, address); \
+ if (c.s.field op (value)) { \
+ result = 0; \
+ break; \
+ } else if (cvmx_get_cycle() > done) { \
+ result = -1; \
+ break; \
+ } else \
+ cvmx_wait(100); \
+ } \
+ } while (0); \
+ result;})
+
+/* This macro logically sets a single field in a CSR. It does the sequence
+ read, modify, and write */
+#define USB_SET_FIELD32(address, type, field, value)\
+ do { \
+ type c; \
+ c.u32 = __cvmx_usb_read_csr32(usb, address);\
+ c.s.field = value; \
+ __cvmx_usb_write_csr32(usb, address, c.u32);\
+ } while (0)
+
+/* Returns the IO address to push/pop stuff data from the FIFOs */
+#define USB_FIFO_ADDRESS(channel, usb_index) (CVMX_USBCX_GOTGCTL(usb_index) + ((channel)+1)*0x1000)
+
+static int octeon_usb_get_clock_type(void)
+{
+ switch (cvmx_sysinfo_get()->board_type) {
+ case CVMX_BOARD_TYPE_BBGW_REF:
+ case CVMX_BOARD_TYPE_LANAI2_A:
+ case CVMX_BOARD_TYPE_LANAI2_U:
+ case CVMX_BOARD_TYPE_LANAI2_G:
+ return USB_CLOCK_TYPE_CRYSTAL_12;
+ }
+
+ /* FIXME: This should use CVMX_BOARD_TYPE_UBNT_E100 */
+ if (OCTEON_IS_MODEL(OCTEON_CN50XX) &&
+ cvmx_sysinfo_get()->board_type == 20002)
+ return USB_CLOCK_TYPE_CRYSTAL_12;
+
+ return USB_CLOCK_TYPE_REF_48;
+}
+
+/**
+ * @INTERNAL
+ * Read a USB 32bit CSR. It performs the necessary address swizzle
+ * for 32bit CSRs and logs the value in a readable format if
+ * debugging is on.
+ *
+ * @param usb USB block this access is for
+ * @param address 64bit address to read
+ *
+ * @return Result of the read
+ */
+static inline uint32_t __cvmx_usb_read_csr32(cvmx_usb_internal_state_t *usb,
+ uint64_t address)
+{
+ uint32_t result = cvmx_read64_uint32(address ^ 4);
+ return result;
+}
+
+
+/**
+ * @INTERNAL
+ * Write a USB 32bit CSR. It performs the necessary address
+ * swizzle for 32bit CSRs and logs the value in a readable format
+ * if debugging is on.
+ *
+ * @param usb USB block this access is for
+ * @param address 64bit address to write
+ * @param value Value to write
+ */
+static inline void __cvmx_usb_write_csr32(cvmx_usb_internal_state_t *usb,
+ uint64_t address, uint32_t value)
+{
+ cvmx_write64_uint32(address ^ 4, value);
+ cvmx_read64_uint64(CVMX_USBNX_DMA0_INB_CHN0(usb->index));
+}
+
+
+/**
+ * @INTERNAL
+ * Read a USB 64bit CSR. It logs the value in a readable format if
+ * debugging is on.
+ *
+ * @param usb USB block this access is for
+ * @param address 64bit address to read
+ *
+ * @return Result of the read
+ */
+static inline uint64_t __cvmx_usb_read_csr64(cvmx_usb_internal_state_t *usb,
+ uint64_t address)
+{
+ uint64_t result = cvmx_read64_uint64(address);
+ return result;
+}
+
+
+/**
+ * @INTERNAL
+ * Write a USB 64bit CSR. It logs the value in a readable format
+ * if debugging is on.
+ *
+ * @param usb USB block this access is for
+ * @param address 64bit address to write
+ * @param value Value to write
+ */
+static inline void __cvmx_usb_write_csr64(cvmx_usb_internal_state_t *usb,
+ uint64_t address, uint64_t value)
+{
+ cvmx_write64_uint64(address, value);
+}
+
+
+/**
+ * @INTERNAL
+ * Utility function to convert complete codes into strings
+ *
+ * @param complete_code
+ * Code to convert
+ *
+ * @return Human readable string
+ */
+static const char *__cvmx_usb_complete_to_string(cvmx_usb_complete_t complete_code)
+{
+ switch (complete_code)
+ {
+ case CVMX_USB_COMPLETE_SUCCESS: return "SUCCESS";
+ case CVMX_USB_COMPLETE_SHORT: return "SHORT";
+ case CVMX_USB_COMPLETE_CANCEL: return "CANCEL";
+ case CVMX_USB_COMPLETE_ERROR: return "ERROR";
+ case CVMX_USB_COMPLETE_STALL: return "STALL";
+ case CVMX_USB_COMPLETE_XACTERR: return "XACTERR";
+ case CVMX_USB_COMPLETE_DATATGLERR: return "DATATGLERR";
+ case CVMX_USB_COMPLETE_BABBLEERR: return "BABBLEERR";
+ case CVMX_USB_COMPLETE_FRAMEERR: return "FRAMEERR";
+ }
+ return "Update __cvmx_usb_complete_to_string";
+}
+
+
+/**
+ * @INTERNAL
+ * Return non zero if this pipe connects to a non HIGH speed
+ * device through a high speed hub.
+ *
+ * @param usb USB block this access is for
+ * @param pipe Pipe to check
+ *
+ * @return Non zero if we need to do split transactions
+ */
+static inline int __cvmx_usb_pipe_needs_split(cvmx_usb_internal_state_t *usb, cvmx_usb_pipe_t *pipe)
+{
+ return ((pipe->device_speed != CVMX_USB_SPEED_HIGH) && (usb->usbcx_hprt.s.prtspd == CVMX_USB_SPEED_HIGH));
+}
+
+
+/**
+ * @INTERNAL
+ * Trivial utility function to return the correct PID for a pipe
+ *
+ * @param pipe pipe to check
+ *
+ * @return PID for pipe
+ */
+static inline int __cvmx_usb_get_data_pid(cvmx_usb_pipe_t *pipe)
+{
+ if (pipe->pid_toggle)
+ return 2; /* Data1 */
+ else
+ return 0; /* Data0 */
+}
+
+
+/**
+ * Return the number of USB ports supported by this Octeon
+ * chip. If the chip doesn't support USB, or is not supported
+ * by this API, a zero will be returned. Most Octeon chips
+ * support one usb port, but some support two ports.
+ * cvmx_usb_initialize() must be called on independent
+ * cvmx_usb_state_t structures.
+ *
+ * @return Number of port, zero if usb isn't supported
+ */
+int cvmx_usb_get_num_ports(void)
+{
+ int arch_ports = 0;
+
+ if (OCTEON_IS_MODEL(OCTEON_CN56XX))
+ arch_ports = 1;
+ else if (OCTEON_IS_MODEL(OCTEON_CN52XX))
+ arch_ports = 2;
+ else if (OCTEON_IS_MODEL(OCTEON_CN50XX))
+ arch_ports = 1;
+ else if (OCTEON_IS_MODEL(OCTEON_CN31XX))
+ arch_ports = 1;
+ else if (OCTEON_IS_MODEL(OCTEON_CN30XX))
+ arch_ports = 1;
+ else
+ arch_ports = 0;
+
+ return arch_ports;
+}
+
+
+/**
+ * @INTERNAL
+ * Allocate a usb transaction for use
+ *
+ * @param usb USB device state populated by
+ * cvmx_usb_initialize().
+ *
+ * @return Transaction or NULL
+ */
+static inline cvmx_usb_transaction_t *__cvmx_usb_alloc_transaction(cvmx_usb_internal_state_t *usb)
+{
+ cvmx_usb_transaction_t *t;
+ t = usb->free_transaction_head;
+ if (t)
+ {
+ usb->free_transaction_head = t->next;
+ if (!usb->free_transaction_head)
+ usb->free_transaction_tail = NULL;
+ }
+ else if (cvmx_unlikely(usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_DEBUG_INFO))
+ cvmx_dprintf("%s: Failed to allocate a transaction\n", __FUNCTION__);
+ if (t)
+ {
+ memset(t, 0, sizeof(*t));
+ t->flags = __CVMX_USB_TRANSACTION_FLAGS_IN_USE;
+ }
+ return t;
+}
+
+
+/**
+ * @INTERNAL
+ * Free a usb transaction
+ *
+ * @param usb USB device state populated by
+ * cvmx_usb_initialize().
+ * @param transaction
+ * Transaction to free
+ */
+static inline void __cvmx_usb_free_transaction(cvmx_usb_internal_state_t *usb,
+ cvmx_usb_transaction_t *transaction)
+{
+ transaction->flags = 0;
+ transaction->prev = NULL;
+ transaction->next = NULL;
+ if (usb->free_transaction_tail)
+ usb->free_transaction_tail->next = transaction;
+ else
+ usb->free_transaction_head = transaction;
+ usb->free_transaction_tail = transaction;
+}
+
+
+/**
+ * @INTERNAL
+ * Add a pipe to the tail of a list
+ * @param list List to add pipe to
+ * @param pipe Pipe to add
+ */
+static inline void __cvmx_usb_append_pipe(cvmx_usb_pipe_list_t *list, cvmx_usb_pipe_t *pipe)
+{
+ pipe->next = NULL;
+ pipe->prev = list->tail;
+ if (list->tail)
+ list->tail->next = pipe;
+ else
+ list->head = pipe;
+ list->tail = pipe;
+}
+
+
+/**
+ * @INTERNAL
+ * Remove a pipe from a list
+ * @param list List to remove pipe from
+ * @param pipe Pipe to remove
+ */
+static inline void __cvmx_usb_remove_pipe(cvmx_usb_pipe_list_t *list, cvmx_usb_pipe_t *pipe)
+{
+ if (list->head == pipe)
+ {
+ list->head = pipe->next;
+ pipe->next = NULL;
+ if (list->head)
+ list->head->prev = NULL;
+ else
+ list->tail = NULL;
+ }
+ else if (list->tail == pipe)
+ {
+ list->tail = pipe->prev;
+ list->tail->next = NULL;
+ pipe->prev = NULL;
+ }
+ else
+ {
+ pipe->prev->next = pipe->next;
+ pipe->next->prev = pipe->prev;
+ pipe->prev = NULL;
+ pipe->next = NULL;
+ }
+}
+
+
+/**
+ * Initialize a USB port for use. This must be called before any
+ * other access to the Octeon USB port is made. The port starts
+ * off in the disabled state.
+ *
+ * @param state Pointer to an empty cvmx_usb_state_t structure
+ * that will be populated by the initialize call.
+ * This structure is then passed to all other USB
+ * functions.
+ * @param usb_port_number
+ * Which Octeon USB port to initialize.
+ * @param flags Flags to control hardware initialization. See
+ * cvmx_usb_initialize_flags_t for the flag
+ * definitions. Some flags are mandatory.
+ *
+ * @return CVMX_USB_SUCCESS or a negative error code defined in
+ * cvmx_usb_status_t.
+ */
+cvmx_usb_status_t cvmx_usb_initialize(cvmx_usb_state_t *state,
+ int usb_port_number,
+ cvmx_usb_initialize_flags_t flags)
+{
+ cvmx_usbnx_clk_ctl_t usbn_clk_ctl;
+ cvmx_usbnx_usbp_ctl_status_t usbn_usbp_ctl_status;
+ cvmx_usb_internal_state_t *usb = (cvmx_usb_internal_state_t*)state;
+
+ usb->init_flags = flags;
+ CVMX_USB_LOG_CALLED();
+ CVMX_USB_LOG_PARAM("%p", state);
+ CVMX_USB_LOG_PARAM("%d", usb_port_number);
+ CVMX_USB_LOG_PARAM("0x%x", flags);
+
+ /* Make sure that state is large enough to store the internal state */
+ if (sizeof(*state) < sizeof(*usb))
+ CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
+ /* At first allow 0-1 for the usb port number */
+ if ((usb_port_number < 0) || (usb_port_number > 1))
+ CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
+ /* For all chips except 52XX there is only one port */
+ if (!OCTEON_IS_MODEL(OCTEON_CN52XX) && (usb_port_number > 0))
+ CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
+ /* Try to determine clock type automatically */
+ if ((flags & (CVMX_USB_INITIALIZE_FLAGS_CLOCK_XO_XI |
+ CVMX_USB_INITIALIZE_FLAGS_CLOCK_XO_GND)) == 0)
+ {
+ if (octeon_usb_get_clock_type() == USB_CLOCK_TYPE_CRYSTAL_12)
+ flags |= CVMX_USB_INITIALIZE_FLAGS_CLOCK_XO_XI; /* Only 12 MHZ crystals are supported */
+ else
+ flags |= CVMX_USB_INITIALIZE_FLAGS_CLOCK_XO_GND;
+ }
+
+ if (flags & CVMX_USB_INITIALIZE_FLAGS_CLOCK_XO_GND)
+ {
+ /* Check for auto ref clock frequency */
+ if (!(flags & CVMX_USB_INITIALIZE_FLAGS_CLOCK_MHZ_MASK))
+ switch (octeon_usb_get_clock_type())
+ {
+ case USB_CLOCK_TYPE_REF_12:
+ flags |= CVMX_USB_INITIALIZE_FLAGS_CLOCK_12MHZ;
+ break;
+ case USB_CLOCK_TYPE_REF_24:
+ flags |= CVMX_USB_INITIALIZE_FLAGS_CLOCK_24MHZ;
+ break;
+ case USB_CLOCK_TYPE_REF_48:
+ flags |= CVMX_USB_INITIALIZE_FLAGS_CLOCK_48MHZ;
+ break;
+ default:
+ CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
+ break;
+ }
+ }
+
+ memset(usb, 0, sizeof(usb));
+ usb->init_flags = flags;
+
+ /* Initialize the USB state structure */
+ {
+ int i;
+ usb->index = usb_port_number;
+
+ /* Initialize the transaction double linked list */
+ usb->free_transaction_head = NULL;
+ usb->free_transaction_tail = NULL;
+ for (i=0; i<MAX_TRANSACTIONS; i++)
+ __cvmx_usb_free_transaction(usb, usb->transaction + i);
+ for (i=0; i<MAX_PIPES; i++)
+ __cvmx_usb_append_pipe(&usb->free_pipes, usb->pipe + i);
+ }
+
+ /* Power On Reset and PHY Initialization */
+
+ /* 1. Wait for DCOK to assert (nothing to do) */
+ /* 2a. Write USBN0/1_CLK_CTL[POR] = 1 and
+ USBN0/1_CLK_CTL[HRST,PRST,HCLK_RST] = 0 */
+ usbn_clk_ctl.u64 = __cvmx_usb_read_csr64(usb, CVMX_USBNX_CLK_CTL(usb->index));
+ usbn_clk_ctl.s.por = 1;
+ usbn_clk_ctl.s.hrst = 0;
+ usbn_clk_ctl.s.prst = 0;
+ usbn_clk_ctl.s.hclk_rst = 0;
+ usbn_clk_ctl.s.enable = 0;
+ /* 2b. Select the USB reference clock/crystal parameters by writing
+ appropriate values to USBN0/1_CLK_CTL[P_C_SEL, P_RTYPE, P_COM_ON] */
+ if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_CLOCK_XO_GND)
+ {
+ /* The USB port uses 12/24/48MHz 2.5V board clock
+ source at USB_XO. USB_XI should be tied to GND.
+ Most Octeon evaluation boards require this setting */
+ if (OCTEON_IS_MODEL(OCTEON_CN3XXX))
+ {
+ usbn_clk_ctl.cn31xx.p_rclk = 1; /* From CN31XX,CN30XX manual */
+ usbn_clk_ctl.cn31xx.p_xenbn = 0;
+ }
+ else if (OCTEON_IS_MODEL(OCTEON_CN56XX) || OCTEON_IS_MODEL(OCTEON_CN50XX))
+ usbn_clk_ctl.cn56xx.p_rtype = 2; /* From CN56XX,CN50XX manual */
+ else
+ usbn_clk_ctl.cn52xx.p_rtype = 1; /* From CN52XX manual */
+
+ switch (flags & CVMX_USB_INITIALIZE_FLAGS_CLOCK_MHZ_MASK)
+ {
+ case CVMX_USB_INITIALIZE_FLAGS_CLOCK_12MHZ:
+ usbn_clk_ctl.s.p_c_sel = 0;
+ break;
+ case CVMX_USB_INITIALIZE_FLAGS_CLOCK_24MHZ:
+ usbn_clk_ctl.s.p_c_sel = 1;
+ break;
+ case CVMX_USB_INITIALIZE_FLAGS_CLOCK_48MHZ:
+ usbn_clk_ctl.s.p_c_sel = 2;
+ break;
+ }
+ }
+ else
+ {
+ /* The USB port uses a 12MHz crystal as clock source
+ at USB_XO and USB_XI */
+ if (OCTEON_IS_MODEL(OCTEON_CN3XXX))
+ {
+ usbn_clk_ctl.cn31xx.p_rclk = 1; /* From CN31XX,CN30XX manual */
+ usbn_clk_ctl.cn31xx.p_xenbn = 1;
+ }
+ else if (OCTEON_IS_MODEL(OCTEON_CN56XX) || OCTEON_IS_MODEL(OCTEON_CN50XX))
+ usbn_clk_ctl.cn56xx.p_rtype = 0; /* From CN56XX,CN50XX manual */
+ else
+ usbn_clk_ctl.cn52xx.p_rtype = 0; /* From CN52XX manual */
+
+ usbn_clk_ctl.s.p_c_sel = 0;
+ }
+ /* 2c. Select the HCLK via writing USBN0/1_CLK_CTL[DIVIDE, DIVIDE2] and
+ setting USBN0/1_CLK_CTL[ENABLE] = 1. Divide the core clock down such
+ that USB is as close as possible to 125Mhz */
+ {
+ int divisor = (octeon_get_clock_rate()+125000000-1)/125000000;
+ if (divisor < 4) /* Lower than 4 doesn't seem to work properly */
+ divisor = 4;
+ usbn_clk_ctl.s.divide = divisor;
+ usbn_clk_ctl.s.divide2 = 0;
+ }
+ __cvmx_usb_write_csr64(usb, CVMX_USBNX_CLK_CTL(usb->index),
+ usbn_clk_ctl.u64);
+ /* 2d. Write USBN0/1_CLK_CTL[HCLK_RST] = 1 */
+ usbn_clk_ctl.s.hclk_rst = 1;
+ __cvmx_usb_write_csr64(usb, CVMX_USBNX_CLK_CTL(usb->index),
+ usbn_clk_ctl.u64);
+ /* 2e. Wait 64 core-clock cycles for HCLK to stabilize */
+ cvmx_wait(64);
+ /* 3. Program the power-on reset field in the USBN clock-control register:
+ USBN_CLK_CTL[POR] = 0 */
+ usbn_clk_ctl.s.por = 0;
+ __cvmx_usb_write_csr64(usb, CVMX_USBNX_CLK_CTL(usb->index),
+ usbn_clk_ctl.u64);
+ /* 4. Wait 1 ms for PHY clock to start */
+ cvmx_wait_usec(1000);
+ /* 5. Program the Reset input from automatic test equipment field in the
+ USBP control and status register: USBN_USBP_CTL_STATUS[ATE_RESET] = 1 */
+ usbn_usbp_ctl_status.u64 = __cvmx_usb_read_csr64(usb, CVMX_USBNX_USBP_CTL_STATUS(usb->index));
+ usbn_usbp_ctl_status.s.ate_reset = 1;
+ __cvmx_usb_write_csr64(usb, CVMX_USBNX_USBP_CTL_STATUS(usb->index),
+ usbn_usbp_ctl_status.u64);
+ /* 6. Wait 10 cycles */
+ cvmx_wait(10);
+ /* 7. Clear ATE_RESET field in the USBN clock-control register:
+ USBN_USBP_CTL_STATUS[ATE_RESET] = 0 */
+ usbn_usbp_ctl_status.s.ate_reset = 0;
+ __cvmx_usb_write_csr64(usb, CVMX_USBNX_USBP_CTL_STATUS(usb->index),
+ usbn_usbp_ctl_status.u64);
+ /* 8. Program the PHY reset field in the USBN clock-control register:
+ USBN_CLK_CTL[PRST] = 1 */
+ usbn_clk_ctl.s.prst = 1;
+ __cvmx_usb_write_csr64(usb, CVMX_USBNX_CLK_CTL(usb->index),
+ usbn_clk_ctl.u64);
+ /* 9. Program the USBP control and status register to select host or
+ device mode. USBN_USBP_CTL_STATUS[HST_MODE] = 0 for host, = 1 for
+ device */
+ usbn_usbp_ctl_status.s.hst_mode = 0;
+ __cvmx_usb_write_csr64(usb, CVMX_USBNX_USBP_CTL_STATUS(usb->index),
+ usbn_usbp_ctl_status.u64);
+ /* 10. Wait 1 us */
+ cvmx_wait_usec(1);
+ /* 11. Program the hreset_n field in the USBN clock-control register:
+ USBN_CLK_CTL[HRST] = 1 */
+ usbn_clk_ctl.s.hrst = 1;
+ __cvmx_usb_write_csr64(usb, CVMX_USBNX_CLK_CTL(usb->index),
+ usbn_clk_ctl.u64);
+ /* 12. Proceed to USB core initialization */
+ usbn_clk_ctl.s.enable = 1;
+ __cvmx_usb_write_csr64(usb, CVMX_USBNX_CLK_CTL(usb->index),
+ usbn_clk_ctl.u64);
+ cvmx_wait_usec(1);
+
+ /* USB Core Initialization */
+
+ /* 1. Read USBC_GHWCFG1, USBC_GHWCFG2, USBC_GHWCFG3, USBC_GHWCFG4 to
+ determine USB core configuration parameters. */
+ /* Nothing needed */
+ /* 2. Program the following fields in the global AHB configuration
+ register (USBC_GAHBCFG)
+ DMA mode, USBC_GAHBCFG[DMAEn]: 1 = DMA mode, 0 = slave mode
+ Burst length, USBC_GAHBCFG[HBSTLEN] = 0
+ Nonperiodic TxFIFO empty level (slave mode only),
+ USBC_GAHBCFG[NPTXFEMPLVL]
+ Periodic TxFIFO empty level (slave mode only),
+ USBC_GAHBCFG[PTXFEMPLVL]
+ Global interrupt mask, USBC_GAHBCFG[GLBLINTRMSK] = 1 */
+ {
+ cvmx_usbcx_gahbcfg_t usbcx_gahbcfg;
+ /* Due to an errata, CN31XX doesn't support DMA */
+ if (OCTEON_IS_MODEL(OCTEON_CN31XX))
+ usb->init_flags |= CVMX_USB_INITIALIZE_FLAGS_NO_DMA;
+ usbcx_gahbcfg.u32 = 0;
+ usbcx_gahbcfg.s.dmaen = !(usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA);
+ if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA)
+ usb->idle_hardware_channels = 0x1; /* Only use one channel with non DMA */
+ else if (OCTEON_IS_MODEL(OCTEON_CN5XXX))
+ usb->idle_hardware_channels = 0xf7; /* CN5XXX have an errata with channel 3 */
+ else
+ usb->idle_hardware_channels = 0xff;
+ usbcx_gahbcfg.s.hbstlen = 0;
+ usbcx_gahbcfg.s.nptxfemplvl = 1;
+ usbcx_gahbcfg.s.ptxfemplvl = 1;
+ usbcx_gahbcfg.s.glblintrmsk = 1;
+ __cvmx_usb_write_csr32(usb, CVMX_USBCX_GAHBCFG(usb->index),
+ usbcx_gahbcfg.u32);
+ }
+ /* 3. Program the following fields in USBC_GUSBCFG register.
+ HS/FS timeout calibration, USBC_GUSBCFG[TOUTCAL] = 0
+ ULPI DDR select, USBC_GUSBCFG[DDRSEL] = 0
+ USB turnaround time, USBC_GUSBCFG[USBTRDTIM] = 0x5
+ PHY low-power clock select, USBC_GUSBCFG[PHYLPWRCLKSEL] = 0 */
+ {
+ cvmx_usbcx_gusbcfg_t usbcx_gusbcfg;
+ usbcx_gusbcfg.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_GUSBCFG(usb->index));
+ usbcx_gusbcfg.s.toutcal = 0;
+ usbcx_gusbcfg.s.ddrsel = 0;
+ usbcx_gusbcfg.s.usbtrdtim = 0x5;
+ usbcx_gusbcfg.s.phylpwrclksel = 0;
+ __cvmx_usb_write_csr32(usb, CVMX_USBCX_GUSBCFG(usb->index),
+ usbcx_gusbcfg.u32);
+ }
+ /* 4. The software must unmask the following bits in the USBC_GINTMSK
+ register.
+ OTG interrupt mask, USBC_GINTMSK[OTGINTMSK] = 1
+ Mode mismatch interrupt mask, USBC_GINTMSK[MODEMISMSK] = 1 */
+ {
+ cvmx_usbcx_gintmsk_t usbcx_gintmsk;
+ int channel;
+
+ usbcx_gintmsk.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_GINTMSK(usb->index));
+ usbcx_gintmsk.s.otgintmsk = 1;
+ usbcx_gintmsk.s.modemismsk = 1;
+ usbcx_gintmsk.s.hchintmsk = 1;
+ usbcx_gintmsk.s.sofmsk = 0;
+ /* We need RX FIFO interrupts if we don't have DMA */
+ if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA)
+ usbcx_gintmsk.s.rxflvlmsk = 1;
+ __cvmx_usb_write_csr32(usb, CVMX_USBCX_GINTMSK(usb->index),
+ usbcx_gintmsk.u32);
+
+ /* Disable all channel interrupts. We'll enable them per channel later */
+ for (channel=0; channel<8; channel++)
+ __cvmx_usb_write_csr32(usb, CVMX_USBCX_HCINTMSKX(channel, usb->index), 0);
+ }
+
+ {
+ /* Host Port Initialization */
+ if (cvmx_unlikely(usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_DEBUG_INFO))
+ cvmx_dprintf("%s: USB%d is in host mode\n", __FUNCTION__, usb->index);
+
+ /* 1. Program the host-port interrupt-mask field to unmask,
+ USBC_GINTMSK[PRTINT] = 1 */
+ USB_SET_FIELD32(CVMX_USBCX_GINTMSK(usb->index), cvmx_usbcx_gintmsk_t,
+ prtintmsk, 1);
+ USB_SET_FIELD32(CVMX_USBCX_GINTMSK(usb->index), cvmx_usbcx_gintmsk_t,
+ disconnintmsk, 1);
+ /* 2. Program the USBC_HCFG register to select full-speed host or
+ high-speed host. */
+ {
+ cvmx_usbcx_hcfg_t usbcx_hcfg;
+ usbcx_hcfg.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HCFG(usb->index));
+ usbcx_hcfg.s.fslssupp = 0;
+ usbcx_hcfg.s.fslspclksel = 0;
+ __cvmx_usb_write_csr32(usb, CVMX_USBCX_HCFG(usb->index), usbcx_hcfg.u32);
+ }
+ /* 3. Program the port power bit to drive VBUS on the USB,
+ USBC_HPRT[PRTPWR] = 1 */
+ USB_SET_FIELD32(CVMX_USBCX_HPRT(usb->index), cvmx_usbcx_hprt_t, prtpwr, 1);
+
+ /* Steps 4-15 from the manual are done later in the port enable */
+ }
+
+ CVMX_USB_RETURN(CVMX_USB_SUCCESS);
+}
+
+
+/**
+ * Shutdown a USB port after a call to cvmx_usb_initialize().
+ * The port should be disabled with all pipes closed when this
+ * function is called.
+ *
+ * @param state USB device state populated by
+ * cvmx_usb_initialize().
+ *
+ * @return CVMX_USB_SUCCESS or a negative error code defined in
+ * cvmx_usb_status_t.
+ */
+cvmx_usb_status_t cvmx_usb_shutdown(cvmx_usb_state_t *state)
+{
+ cvmx_usbnx_clk_ctl_t usbn_clk_ctl;
+ cvmx_usb_internal_state_t *usb = (cvmx_usb_internal_state_t*)state;
+
+ CVMX_USB_LOG_CALLED();
+ CVMX_USB_LOG_PARAM("%p", state);
+
+ /* Make sure all pipes are closed */
+ if (usb->idle_pipes.head ||
+ usb->active_pipes[CVMX_USB_TRANSFER_ISOCHRONOUS].head ||
+ usb->active_pipes[CVMX_USB_TRANSFER_INTERRUPT].head ||
+ usb->active_pipes[CVMX_USB_TRANSFER_CONTROL].head ||
+ usb->active_pipes[CVMX_USB_TRANSFER_BULK].head)
+ CVMX_USB_RETURN(CVMX_USB_BUSY);
+
+ /* Disable the clocks and put them in power on reset */
+ usbn_clk_ctl.u64 = __cvmx_usb_read_csr64(usb, CVMX_USBNX_CLK_CTL(usb->index));
+ usbn_clk_ctl.s.enable = 1;
+ usbn_clk_ctl.s.por = 1;
+ usbn_clk_ctl.s.hclk_rst = 1;
+ usbn_clk_ctl.s.prst = 0;
+ usbn_clk_ctl.s.hrst = 0;
+ __cvmx_usb_write_csr64(usb, CVMX_USBNX_CLK_CTL(usb->index),
+ usbn_clk_ctl.u64);
+ CVMX_USB_RETURN(CVMX_USB_SUCCESS);
+}
+
+
+/**
+ * Enable a USB port. After this call succeeds, the USB port is
+ * online and servicing requests.
+ *
+ * @param state USB device state populated by
+ * cvmx_usb_initialize().
+ *
+ * @return CVMX_USB_SUCCESS or a negative error code defined in
+ * cvmx_usb_status_t.
+ */
+cvmx_usb_status_t cvmx_usb_enable(cvmx_usb_state_t *state)
+{
+ cvmx_usbcx_ghwcfg3_t usbcx_ghwcfg3;
+ cvmx_usb_internal_state_t *usb = (cvmx_usb_internal_state_t*)state;
+
+ CVMX_USB_LOG_CALLED();
+ CVMX_USB_LOG_PARAM("%p", state);
+
+ usb->usbcx_hprt.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HPRT(usb->index));
+
+ /* If the port is already enabled the just return. We don't need to do
+ anything */
+ if (usb->usbcx_hprt.s.prtena)
+ CVMX_USB_RETURN(CVMX_USB_SUCCESS);
+
+ /* If there is nothing plugged into the port then fail immediately */
+ if (!usb->usbcx_hprt.s.prtconnsts)
+ {
+ if (cvmx_unlikely(usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_DEBUG_INFO))
+ cvmx_dprintf("%s: USB%d Nothing plugged into the port\n", __FUNCTION__, usb->index);
+ CVMX_USB_RETURN(CVMX_USB_TIMEOUT);
+ }
+
+ /* Program the port reset bit to start the reset process */
+ USB_SET_FIELD32(CVMX_USBCX_HPRT(usb->index), cvmx_usbcx_hprt_t, prtrst, 1);
+
+ /* Wait at least 50ms (high speed), or 10ms (full speed) for the reset
+ process to complete. */
+ cvmx_wait_usec(50000);
+
+ /* Program the port reset bit to 0, USBC_HPRT[PRTRST] = 0 */
+ USB_SET_FIELD32(CVMX_USBCX_HPRT(usb->index), cvmx_usbcx_hprt_t, prtrst, 0);
+
+ /* Wait for the USBC_HPRT[PRTENA]. */
+ if (CVMX_WAIT_FOR_FIELD32(CVMX_USBCX_HPRT(usb->index), cvmx_usbcx_hprt_t,
+ prtena, ==, 1, 100000))
+ {
+ if (cvmx_unlikely(usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_DEBUG_INFO))
+ cvmx_dprintf("%s: Timeout waiting for the port to finish reset\n",
+ __FUNCTION__);
+ CVMX_USB_RETURN(CVMX_USB_TIMEOUT);
+ }
+
+ /* Read the port speed field to get the enumerated speed, USBC_HPRT[PRTSPD]. */
+ usb->usbcx_hprt.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HPRT(usb->index));
+ if (cvmx_unlikely(usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_DEBUG_INFO))
+ cvmx_dprintf("%s: USB%d is in %s speed mode\n", __FUNCTION__, usb->index,
+ (usb->usbcx_hprt.s.prtspd == CVMX_USB_SPEED_HIGH) ? "high" :
+ (usb->usbcx_hprt.s.prtspd == CVMX_USB_SPEED_FULL) ? "full" :
+ "low");
+
+ usbcx_ghwcfg3.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_GHWCFG3(usb->index));
+
+ /* 13. Program the USBC_GRXFSIZ register to select the size of the receive
+ FIFO (25%). */
+ USB_SET_FIELD32(CVMX_USBCX_GRXFSIZ(usb->index), cvmx_usbcx_grxfsiz_t,
+ rxfdep, usbcx_ghwcfg3.s.dfifodepth / 4);
+ /* 14. Program the USBC_GNPTXFSIZ register to select the size and the
+ start address of the non- periodic transmit FIFO for nonperiodic
+ transactions (50%). */
+ {
+ cvmx_usbcx_gnptxfsiz_t siz;
+ siz.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_GNPTXFSIZ(usb->index));
+ siz.s.nptxfdep = usbcx_ghwcfg3.s.dfifodepth / 2;
+ siz.s.nptxfstaddr = usbcx_ghwcfg3.s.dfifodepth / 4;
+ __cvmx_usb_write_csr32(usb, CVMX_USBCX_GNPTXFSIZ(usb->index), siz.u32);
+ }
+ /* 15. Program the USBC_HPTXFSIZ register to select the size and start
+ address of the periodic transmit FIFO for periodic transactions (25%). */
+ {
+ cvmx_usbcx_hptxfsiz_t siz;
+ siz.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HPTXFSIZ(usb->index));
+ siz.s.ptxfsize = usbcx_ghwcfg3.s.dfifodepth / 4;
+ siz.s.ptxfstaddr = 3 * usbcx_ghwcfg3.s.dfifodepth / 4;
+ __cvmx_usb_write_csr32(usb, CVMX_USBCX_HPTXFSIZ(usb->index), siz.u32);
+ }
+ /* Flush all FIFOs */
+ USB_SET_FIELD32(CVMX_USBCX_GRSTCTL(usb->index), cvmx_usbcx_grstctl_t, txfnum, 0x10);
+ USB_SET_FIELD32(CVMX_USBCX_GRSTCTL(usb->index), cvmx_usbcx_grstctl_t, txfflsh, 1);
+ CVMX_WAIT_FOR_FIELD32(CVMX_USBCX_GRSTCTL(usb->index), cvmx_usbcx_grstctl_t,
+ txfflsh, ==, 0, 100);
+ USB_SET_FIELD32(CVMX_USBCX_GRSTCTL(usb->index), cvmx_usbcx_grstctl_t, rxfflsh, 1);
+ CVMX_WAIT_FOR_FIELD32(CVMX_USBCX_GRSTCTL(usb->index), cvmx_usbcx_grstctl_t,
+ rxfflsh, ==, 0, 100);
+
+ CVMX_USB_RETURN(CVMX_USB_SUCCESS);
+}
+
+
+/**
+ * Disable a USB port. After this call the USB port will not
+ * generate data transfers and will not generate events.
+ * Transactions in process will fail and call their
+ * associated callbacks.
+ *
+ * @param state USB device state populated by
+ * cvmx_usb_initialize().
+ *
+ * @return CVMX_USB_SUCCESS or a negative error code defined in
+ * cvmx_usb_status_t.
+ */
+cvmx_usb_status_t cvmx_usb_disable(cvmx_usb_state_t *state)
+{
+ cvmx_usb_internal_state_t *usb = (cvmx_usb_internal_state_t*)state;
+
+ CVMX_USB_LOG_CALLED();
+ CVMX_USB_LOG_PARAM("%p", state);
+
+ /* Disable the port */
+ USB_SET_FIELD32(CVMX_USBCX_HPRT(usb->index), cvmx_usbcx_hprt_t, prtena, 1);
+ CVMX_USB_RETURN(CVMX_USB_SUCCESS);
+}
+
+
+/**
+ * Get the current state of the USB port. Use this call to
+ * determine if the usb port has anything connected, is enabled,
+ * or has some sort of error condition. The return value of this
+ * call has "changed" bits to signal of the value of some fields
+ * have changed between calls. These "changed" fields are based
+ * on the last call to cvmx_usb_set_status(). In order to clear
+ * them, you must update the status through cvmx_usb_set_status().
+ *
+ * @param state USB device state populated by
+ * cvmx_usb_initialize().
+ *
+ * @return Port status information
+ */
+cvmx_usb_port_status_t cvmx_usb_get_status(cvmx_usb_state_t *state)
+{
+ cvmx_usbcx_hprt_t usbc_hprt;
+ cvmx_usb_port_status_t result;
+ cvmx_usb_internal_state_t *usb = (cvmx_usb_internal_state_t*)state;
+
+ memset(&result, 0, sizeof(result));
+
+ CVMX_USB_LOG_CALLED();
+ CVMX_USB_LOG_PARAM("%p", state);
+
+ usbc_hprt.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HPRT(usb->index));
+ result.port_enabled = usbc_hprt.s.prtena;
+ result.port_over_current = usbc_hprt.s.prtovrcurract;
+ result.port_powered = usbc_hprt.s.prtpwr;
+ result.port_speed = usbc_hprt.s.prtspd;
+ result.connected = usbc_hprt.s.prtconnsts;
+ result.connect_change = (result.connected != usb->port_status.connected);
+
+ if (cvmx_unlikely(usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_DEBUG_CALLS))
+ cvmx_dprintf("%*s%s: returned port enabled=%d, over_current=%d, powered=%d, speed=%d, connected=%d, connect_change=%d\n",
+ 2*(--usb->indent), "", __FUNCTION__,
+ result.port_enabled,
+ result.port_over_current,
+ result.port_powered,
+ result.port_speed,
+ result.connected,
+ result.connect_change);
+ return result;
+}
+
+
+/**
+ * Set the current state of the USB port. The status is used as
+ * a reference for the "changed" bits returned by
+ * cvmx_usb_get_status(). Other than serving as a reference, the
+ * status passed to this function is not used. No fields can be
+ * changed through this call.
+ *
+ * @param state USB device state populated by
+ * cvmx_usb_initialize().
+ * @param port_status
+ * Port status to set, most like returned by cvmx_usb_get_status()
+ */
+void cvmx_usb_set_status(cvmx_usb_state_t *state, cvmx_usb_port_status_t port_status)
+{
+ cvmx_usb_internal_state_t *usb = (cvmx_usb_internal_state_t*)state;
+ CVMX_USB_LOG_CALLED();
+ CVMX_USB_LOG_PARAM("%p", state);
+ usb->port_status = port_status;
+ CVMX_USB_RETURN_NOTHING();
+}
+
+
+/**
+ * @INTERNAL
+ * Convert a USB transaction into a handle
+ *
+ * @param usb USB device state populated by
+ * cvmx_usb_initialize().
+ * @param transaction
+ * Transaction to get handle for
+ *
+ * @return Handle
+ */
+static inline int __cvmx_usb_get_submit_handle(cvmx_usb_internal_state_t *usb,
+ cvmx_usb_transaction_t *transaction)
+{
+ return ((unsigned long)transaction - (unsigned long)usb->transaction) /
+ sizeof(*transaction);
+}
+
+
+/**
+ * @INTERNAL
+ * Convert a USB pipe into a handle
+ *
+ * @param usb USB device state populated by
+ * cvmx_usb_initialize().
+ * @param pipe Pipe to get handle for
+ *
+ * @return Handle
+ */
+static inline int __cvmx_usb_get_pipe_handle(cvmx_usb_internal_state_t *usb,
+ cvmx_usb_pipe_t *pipe)
+{
+ return ((unsigned long)pipe - (unsigned long)usb->pipe) / sizeof(*pipe);
+}
+
+
+/**
+ * Open a virtual pipe between the host and a USB device. A pipe
+ * must be opened before data can be transferred between a device
+ * and Octeon.
+ *
+ * @param state USB device state populated by
+ * cvmx_usb_initialize().
+ * @param flags Optional pipe flags defined in
+ * cvmx_usb_pipe_flags_t.
+ * @param device_addr
+ * USB device address to open the pipe to
+ * (0-127).
+ * @param endpoint_num
+ * USB endpoint number to open the pipe to
+ * (0-15).
+ * @param device_speed
+ * The speed of the device the pipe is going
+ * to. This must match the device's speed,
+ * which may be different than the port speed.
+ * @param max_packet The maximum packet length the device can
+ * transmit/receive (low speed=0-8, full
+ * speed=0-1023, high speed=0-1024). This value
+ * comes from the standard endpoint descriptor
+ * field wMaxPacketSize bits <10:0>.
+ * @param transfer_type
+ * The type of transfer this pipe is for.
+ * @param transfer_dir
+ * The direction the pipe is in. This is not
+ * used for control pipes.
+ * @param interval For ISOCHRONOUS and INTERRUPT transfers,
+ * this is how often the transfer is scheduled
+ * for. All other transfers should specify
+ * zero. The units are in frames (8000/sec at
+ * high speed, 1000/sec for full speed).
+ * @param multi_count
+ * For high speed devices, this is the maximum
+ * allowed number of packet per microframe.
+ * Specify zero for non high speed devices. This
+ * value comes from the standard endpoint descriptor
+ * field wMaxPacketSize bits <12:11>.
+ * @param hub_device_addr
+ * Hub device address this device is connected
+ * to. Devices connected directly to Octeon
+ * use zero. This is only used when the device
+ * is full/low speed behind a high speed hub.
+ * The address will be of the high speed hub,
+ * not and full speed hubs after it.
+ * @param hub_port Which port on the hub the device is
+ * connected. Use zero for devices connected
+ * directly to Octeon. Like hub_device_addr,
+ * this is only used for full/low speed
+ * devices behind a high speed hub.
+ *
+ * @return A non negative value is a pipe handle. Negative
+ * values are failure codes from cvmx_usb_status_t.
+ */
+int cvmx_usb_open_pipe(cvmx_usb_state_t *state, cvmx_usb_pipe_flags_t flags,
+ int device_addr, int endpoint_num,
+ cvmx_usb_speed_t device_speed, int max_packet,
+ cvmx_usb_transfer_t transfer_type,
+ cvmx_usb_direction_t transfer_dir, int interval,
+ int multi_count, int hub_device_addr, int hub_port)
+{
+ cvmx_usb_pipe_t *pipe;
+ cvmx_usb_internal_state_t *usb = (cvmx_usb_internal_state_t*)state;
+
+ CVMX_USB_LOG_CALLED();
+ CVMX_USB_LOG_PARAM("%p", state);
+ CVMX_USB_LOG_PARAM("0x%x", flags);
+ CVMX_USB_LOG_PARAM("%d", device_addr);
+ CVMX_USB_LOG_PARAM("%d", endpoint_num);
+ CVMX_USB_LOG_PARAM("%d", device_speed);
+ CVMX_USB_LOG_PARAM("%d", max_packet);
+ CVMX_USB_LOG_PARAM("%d", transfer_type);
+ CVMX_USB_LOG_PARAM("%d", transfer_dir);
+ CVMX_USB_LOG_PARAM("%d", interval);
+ CVMX_USB_LOG_PARAM("%d", multi_count);
+ CVMX_USB_LOG_PARAM("%d", hub_device_addr);
+ CVMX_USB_LOG_PARAM("%d", hub_port);
+
+ if (cvmx_unlikely((device_addr < 0) || (device_addr > MAX_USB_ADDRESS)))
+ CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
+ if (cvmx_unlikely((endpoint_num < 0) || (endpoint_num > MAX_USB_ENDPOINT)))
+ CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
+ if (cvmx_unlikely(device_speed > CVMX_USB_SPEED_LOW))
+ CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
+ if (cvmx_unlikely((max_packet <= 0) || (max_packet > 1024)))
+ CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
+ if (cvmx_unlikely(transfer_type > CVMX_USB_TRANSFER_INTERRUPT))
+ CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
+ if (cvmx_unlikely((transfer_dir != CVMX_USB_DIRECTION_OUT) &&
+ (transfer_dir != CVMX_USB_DIRECTION_IN)))
+ CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
+ if (cvmx_unlikely(interval < 0))
+ CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
+ if (cvmx_unlikely((transfer_type == CVMX_USB_TRANSFER_CONTROL) && interval))
+ CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
+ if (cvmx_unlikely(multi_count < 0))
+ CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
+ if (cvmx_unlikely((device_speed != CVMX_USB_SPEED_HIGH) &&
+ (multi_count != 0)))
+ CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
+ if (cvmx_unlikely((hub_device_addr < 0) || (hub_device_addr > MAX_USB_ADDRESS)))
+ CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
+ if (cvmx_unlikely((hub_port < 0) || (hub_port > MAX_USB_HUB_PORT)))
+ CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
+
+ /* Find a free pipe */
+ pipe = usb->free_pipes.head;
+ if (!pipe)
+ CVMX_USB_RETURN(CVMX_USB_NO_MEMORY);
+ __cvmx_usb_remove_pipe(&usb->free_pipes, pipe);
+ pipe->flags = flags | __CVMX_USB_PIPE_FLAGS_OPEN;
+ if ((device_speed == CVMX_USB_SPEED_HIGH) &&
+ (transfer_dir == CVMX_USB_DIRECTION_OUT) &&
+ (transfer_type == CVMX_USB_TRANSFER_BULK))
+ pipe->flags |= __CVMX_USB_PIPE_FLAGS_NEED_PING;
+ pipe->device_addr = device_addr;
+ pipe->endpoint_num = endpoint_num;
+ pipe->device_speed = device_speed;
+ pipe->max_packet = max_packet;
+ pipe->transfer_type = transfer_type;
+ pipe->transfer_dir = transfer_dir;
+ /* All pipes use interval to rate limit NAK processing. Force an interval
+ if one wasn't supplied */
+ if (!interval)
+ interval = 1;
+ if (__cvmx_usb_pipe_needs_split(usb, pipe))
+ {
+ pipe->interval = interval*8;
+ /* Force start splits to be schedule on uFrame 0 */
+ pipe->next_tx_frame = ((usb->frame_number+7)&~7) + pipe->interval;
+ }
+ else
+ {
+ pipe->interval = interval;
+ pipe->next_tx_frame = usb->frame_number + pipe->interval;
+ }
+ pipe->multi_count = multi_count;
+ pipe->hub_device_addr = hub_device_addr;
+ pipe->hub_port = hub_port;
+ pipe->pid_toggle = 0;
+ pipe->split_sc_frame = -1;
+ __cvmx_usb_append_pipe(&usb->idle_pipes, pipe);
+
+ /* We don't need to tell the hardware about this pipe yet since
+ it doesn't have any submitted requests */
+
+ CVMX_USB_RETURN(__cvmx_usb_get_pipe_handle(usb, pipe));
+}
+
+
+/**
+ * @INTERNAL
+ * Poll the RX FIFOs and remove data as needed. This function is only used
+ * in non DMA mode. It is very important that this function be called quickly
+ * enough to prevent FIFO overflow.
+ *
+ * @param usb USB device state populated by
+ * cvmx_usb_initialize().
+ */
+static void __cvmx_usb_poll_rx_fifo(cvmx_usb_internal_state_t *usb)
+{
+ cvmx_usbcx_grxstsph_t rx_status;
+ int channel;
+ int bytes;
+ uint64_t address;
+ uint32_t *ptr;
+
+ CVMX_USB_LOG_CALLED();
+ CVMX_USB_LOG_PARAM("%p", usb);
+
+ rx_status.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_GRXSTSPH(usb->index));
+ /* Only read data if IN data is there */
+ if (rx_status.s.pktsts != 2)
+ CVMX_USB_RETURN_NOTHING();
+ /* Check if no data is available */
+ if (!rx_status.s.bcnt)
+ CVMX_USB_RETURN_NOTHING();
+
+ channel = rx_status.s.chnum;
+ bytes = rx_status.s.bcnt;
+ if (!bytes)
+ CVMX_USB_RETURN_NOTHING();
+
+ /* Get where the DMA engine would have written this data */
+ address = __cvmx_usb_read_csr64(usb, CVMX_USBNX_DMA0_INB_CHN0(usb->index) + channel*8);
+ ptr = cvmx_phys_to_ptr(address);
+ __cvmx_usb_write_csr64(usb, CVMX_USBNX_DMA0_INB_CHN0(usb->index) + channel*8, address + bytes);
+
+ /* Loop writing the FIFO data for this packet into memory */
+ while (bytes > 0)
+ {
+ *ptr++ = __cvmx_usb_read_csr32(usb, USB_FIFO_ADDRESS(channel, usb->index));
+ bytes -= 4;
+ }
+ CVMX_SYNCW;
+
+ CVMX_USB_RETURN_NOTHING();
+}
+
+
+/**
+ * Fill the TX hardware fifo with data out of the software
+ * fifos
+ *
+ * @param usb USB device state populated by
+ * cvmx_usb_initialize().
+ * @param fifo Software fifo to use
+ * @param available Amount of space in the hardware fifo
+ *
+ * @return Non zero if the hardware fifo was too small and needs
+ * to be serviced again.
+ */
+static int __cvmx_usb_fill_tx_hw(cvmx_usb_internal_state_t *usb, cvmx_usb_tx_fifo_t *fifo, int available)
+{
+ CVMX_USB_LOG_CALLED();
+ CVMX_USB_LOG_PARAM("%p", usb);
+ CVMX_USB_LOG_PARAM("%p", fifo);
+ CVMX_USB_LOG_PARAM("%d", available);
+
+ /* We're done either when there isn't anymore space or the software FIFO
+ is empty */
+ while (available && (fifo->head != fifo->tail))
+ {
+ int i = fifo->tail;
+ const uint32_t *ptr = cvmx_phys_to_ptr(fifo->entry[i].address);
+ uint64_t csr_address = USB_FIFO_ADDRESS(fifo->entry[i].channel, usb->index) ^ 4;
+ int words = available;
+
+ /* Limit the amount of data to waht the SW fifo has */
+ if (fifo->entry[i].size <= available)
+ {
+ words = fifo->entry[i].size;
+ fifo->tail++;
+ if (fifo->tail > MAX_CHANNELS)
+ fifo->tail = 0;
+ }
+
+ /* Update the next locations and counts */
+ available -= words;
+ fifo->entry[i].address += words * 4;
+ fifo->entry[i].size -= words;
+
+ /* Write the HW fifo data. The read every three writes is due
+ to an errata on CN3XXX chips */
+ while (words > 3)
+ {
+ cvmx_write64_uint32(csr_address, *ptr++);
+ cvmx_write64_uint32(csr_address, *ptr++);
+ cvmx_write64_uint32(csr_address, *ptr++);
+ cvmx_read64_uint64(CVMX_USBNX_DMA0_INB_CHN0(usb->index));
+ words -= 3;
+ }
+ cvmx_write64_uint32(csr_address, *ptr++);
+ if (--words)
+ {
+ cvmx_write64_uint32(csr_address, *ptr++);
+ if (--words)
+ cvmx_write64_uint32(csr_address, *ptr++);
+ }
+ cvmx_read64_uint64(CVMX_USBNX_DMA0_INB_CHN0(usb->index));
+ }
+ CVMX_USB_RETURN(fifo->head != fifo->tail);
+}
+
+
+/**
+ * Check the hardware FIFOs and fill them as needed
+ *
+ * @param usb USB device state populated by
+ * cvmx_usb_initialize().
+ */
+static void __cvmx_usb_poll_tx_fifo(cvmx_usb_internal_state_t *usb)
+{
+ CVMX_USB_LOG_CALLED();
+ CVMX_USB_LOG_PARAM("%p", usb);
+
+ if (usb->periodic.head != usb->periodic.tail)
+ {
+ cvmx_usbcx_hptxsts_t tx_status;
+ tx_status.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HPTXSTS(usb->index));
+ if (__cvmx_usb_fill_tx_hw(usb, &usb->periodic, tx_status.s.ptxfspcavail))
+ USB_SET_FIELD32(CVMX_USBCX_GINTMSK(usb->index), cvmx_usbcx_gintmsk_t, ptxfempmsk, 1);
+ else
+ USB_SET_FIELD32(CVMX_USBCX_GINTMSK(usb->index), cvmx_usbcx_gintmsk_t, ptxfempmsk, 0);
+ }
+
+ if (usb->nonperiodic.head != usb->nonperiodic.tail)
+ {
+ cvmx_usbcx_gnptxsts_t tx_status;
+ tx_status.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_GNPTXSTS(usb->index));
+ if (__cvmx_usb_fill_tx_hw(usb, &usb->nonperiodic, tx_status.s.nptxfspcavail))
+ USB_SET_FIELD32(CVMX_USBCX_GINTMSK(usb->index), cvmx_usbcx_gintmsk_t, nptxfempmsk, 1);
+ else
+ USB_SET_FIELD32(CVMX_USBCX_GINTMSK(usb->index), cvmx_usbcx_gintmsk_t, nptxfempmsk, 0);
+ }
+
+ CVMX_USB_RETURN_NOTHING();
+}
+
+
+/**
+ * @INTERNAL
+ * Fill the TX FIFO with an outgoing packet
+ *
+ * @param usb USB device state populated by
+ * cvmx_usb_initialize().
+ * @param channel Channel number to get packet from
+ */
+static void __cvmx_usb_fill_tx_fifo(cvmx_usb_internal_state_t *usb, int channel)
+{
+ cvmx_usbcx_hccharx_t hcchar;
+ cvmx_usbcx_hcspltx_t usbc_hcsplt;
+ cvmx_usbcx_hctsizx_t usbc_hctsiz;
+ cvmx_usb_tx_fifo_t *fifo;
+
+ CVMX_USB_LOG_CALLED();
+ CVMX_USB_LOG_PARAM("%p", usb);
+ CVMX_USB_LOG_PARAM("%d", channel);
+
+ /* We only need to fill data on outbound channels */
+ hcchar.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HCCHARX(channel, usb->index));
+ if (hcchar.s.epdir != CVMX_USB_DIRECTION_OUT)
+ CVMX_USB_RETURN_NOTHING();
+
+ /* OUT Splits only have data on the start and not the complete */
+ usbc_hcsplt.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HCSPLTX(channel, usb->index));
+ if (usbc_hcsplt.s.spltena && usbc_hcsplt.s.compsplt)
+ CVMX_USB_RETURN_NOTHING();
+
+ /* Find out how many bytes we need to fill and convert it into 32bit words */
+ usbc_hctsiz.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HCTSIZX(channel, usb->index));
+ if (!usbc_hctsiz.s.xfersize)
+ CVMX_USB_RETURN_NOTHING();
+
+ if ((hcchar.s.eptype == CVMX_USB_TRANSFER_INTERRUPT) ||
+ (hcchar.s.eptype == CVMX_USB_TRANSFER_ISOCHRONOUS))
+ fifo = &usb->periodic;
+ else
+ fifo = &usb->nonperiodic;
+
+ fifo->entry[fifo->head].channel = channel;
+ fifo->entry[fifo->head].address = __cvmx_usb_read_csr64(usb, CVMX_USBNX_DMA0_OUTB_CHN0(usb->index) + channel*8);
+ fifo->entry[fifo->head].size = (usbc_hctsiz.s.xfersize+3)>>2;
+ fifo->head++;
+ if (fifo->head > MAX_CHANNELS)
+ fifo->head = 0;
+
+ __cvmx_usb_poll_tx_fifo(usb);
+
+ CVMX_USB_RETURN_NOTHING();
+}
+
+/**
+ * @INTERNAL
+ * Perform channel specific setup for Control transactions. All
+ * the generic stuff will already have been done in
+ * __cvmx_usb_start_channel()
+ *
+ * @param usb USB device state populated by
+ * cvmx_usb_initialize().
+ * @param channel Channel to setup
+ * @param pipe Pipe for control transaction
+ */
+static void __cvmx_usb_start_channel_control(cvmx_usb_internal_state_t *usb,
+ int channel,
+ cvmx_usb_pipe_t *pipe)
+{
+ cvmx_usb_transaction_t *transaction = pipe->head;
+ cvmx_usb_control_header_t *header = cvmx_phys_to_ptr(transaction->control_header);
+ int bytes_to_transfer = transaction->buffer_length - transaction->actual_bytes;
+ int packets_to_transfer;
+ cvmx_usbcx_hctsizx_t usbc_hctsiz;
+
+ CVMX_USB_LOG_CALLED();
+ CVMX_USB_LOG_PARAM("%p", usb);
+ CVMX_USB_LOG_PARAM("%d", channel);
+ CVMX_USB_LOG_PARAM("%p", pipe);
+
+ usbc_hctsiz.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HCTSIZX(channel, usb->index));
+
+ switch (transaction->stage)
+ {
+ case CVMX_USB_STAGE_NON_CONTROL:
+ case CVMX_USB_STAGE_NON_CONTROL_SPLIT_COMPLETE:
+ cvmx_dprintf("%s: ERROR - Non control stage\n", __FUNCTION__);
+ break;
+ case CVMX_USB_STAGE_SETUP:
+ usbc_hctsiz.s.pid = 3; /* Setup */
+ bytes_to_transfer = sizeof(*header);
+ /* All Control operations start with a setup going OUT */
+ USB_SET_FIELD32(CVMX_USBCX_HCCHARX(channel, usb->index), cvmx_usbcx_hccharx_t, epdir, CVMX_USB_DIRECTION_OUT);
+ /* Setup send the control header instead of the buffer data. The
+ buffer data will be used in the next stage */
+ __cvmx_usb_write_csr64(usb, CVMX_USBNX_DMA0_OUTB_CHN0(usb->index) + channel*8, transaction->control_header);
+ break;
+ case CVMX_USB_STAGE_SETUP_SPLIT_COMPLETE:
+ usbc_hctsiz.s.pid = 3; /* Setup */
+ bytes_to_transfer = 0;
+ /* All Control operations start with a setup going OUT */
+ USB_SET_FIELD32(CVMX_USBCX_HCCHARX(channel, usb->index), cvmx_usbcx_hccharx_t, epdir, CVMX_USB_DIRECTION_OUT);
+ USB_SET_FIELD32(CVMX_USBCX_HCSPLTX(channel, usb->index), cvmx_usbcx_hcspltx_t, compsplt, 1);
+ break;
+ case CVMX_USB_STAGE_DATA:
+ usbc_hctsiz.s.pid = __cvmx_usb_get_data_pid(pipe);
+ if (__cvmx_usb_pipe_needs_split(usb, pipe))
+ {
+ if (header->s.request_type & 0x80)
+ bytes_to_transfer = 0;
+ else if (bytes_to_transfer > pipe->max_packet)
+ bytes_to_transfer = pipe->max_packet;
+ }
+ USB_SET_FIELD32(CVMX_USBCX_HCCHARX(channel, usb->index),
+ cvmx_usbcx_hccharx_t, epdir,
+ ((header->s.request_type & 0x80) ?
+ CVMX_USB_DIRECTION_IN :
+ CVMX_USB_DIRECTION_OUT));
+ break;
+ case CVMX_USB_STAGE_DATA_SPLIT_COMPLETE:
+ usbc_hctsiz.s.pid = __cvmx_usb_get_data_pid(pipe);
+ if (!(header->s.request_type & 0x80))
+ bytes_to_transfer = 0;
+ USB_SET_FIELD32(CVMX_USBCX_HCCHARX(channel, usb->index),
+ cvmx_usbcx_hccharx_t, epdir,
+ ((header->s.request_type & 0x80) ?
+ CVMX_USB_DIRECTION_IN :
+ CVMX_USB_DIRECTION_OUT));
+ USB_SET_FIELD32(CVMX_USBCX_HCSPLTX(channel, usb->index), cvmx_usbcx_hcspltx_t, compsplt, 1);
+ break;
+ case CVMX_USB_STAGE_STATUS:
+ usbc_hctsiz.s.pid = __cvmx_usb_get_data_pid(pipe);
+ bytes_to_transfer = 0;
+ USB_SET_FIELD32(CVMX_USBCX_HCCHARX(channel, usb->index), cvmx_usbcx_hccharx_t, epdir,
+ ((header->s.request_type & 0x80) ?
+ CVMX_USB_DIRECTION_OUT :
+ CVMX_USB_DIRECTION_IN));
+ break;
+ case CVMX_USB_STAGE_STATUS_SPLIT_COMPLETE:
+ usbc_hctsiz.s.pid = __cvmx_usb_get_data_pid(pipe);
+ bytes_to_transfer = 0;
+ USB_SET_FIELD32(CVMX_USBCX_HCCHARX(channel, usb->index), cvmx_usbcx_hccharx_t, epdir,
+ ((header->s.request_type & 0x80) ?
+ CVMX_USB_DIRECTION_OUT :
+ CVMX_USB_DIRECTION_IN));
+ USB_SET_FIELD32(CVMX_USBCX_HCSPLTX(channel, usb->index), cvmx_usbcx_hcspltx_t, compsplt, 1);
+ break;
+ }
+
+ /* Make sure the transfer never exceeds the byte limit of the hardware.
+ Further bytes will be sent as continued transactions */
+ if (bytes_to_transfer > MAX_TRANSFER_BYTES)
+ {
+ /* Round MAX_TRANSFER_BYTES to a multiple of out packet size */
+ bytes_to_transfer = MAX_TRANSFER_BYTES / pipe->max_packet;
+ bytes_to_transfer *= pipe->max_packet;
+ }
+
+ /* Calculate the number of packets to transfer. If the length is zero
+ we still need to transfer one packet */
+ packets_to_transfer = (bytes_to_transfer + pipe->max_packet - 1) / pipe->max_packet;
+ if (packets_to_transfer == 0)
+ packets_to_transfer = 1;
+ else if ((packets_to_transfer>1) && (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA))
+ {
+ /* Limit to one packet when not using DMA. Channels must be restarted
+ between every packet for IN transactions, so there is no reason to
+ do multiple packets in a row */
+ packets_to_transfer = 1;
+ bytes_to_transfer = packets_to_transfer * pipe->max_packet;
+ }
+ else if (packets_to_transfer > MAX_TRANSFER_PACKETS)
+ {
+ /* Limit the number of packet and data transferred to what the
+ hardware can handle */
+ packets_to_transfer = MAX_TRANSFER_PACKETS;
+ bytes_to_transfer = packets_to_transfer * pipe->max_packet;
+ }
+
+ usbc_hctsiz.s.xfersize = bytes_to_transfer;
+ usbc_hctsiz.s.pktcnt = packets_to_transfer;
+
+ __cvmx_usb_write_csr32(usb, CVMX_USBCX_HCTSIZX(channel, usb->index), usbc_hctsiz.u32);
+ CVMX_USB_RETURN_NOTHING();
+}
+
+
+/**
+ * @INTERNAL
+ * Start a channel to perform the pipe's head transaction
+ *
+ * @param usb USB device state populated by
+ * cvmx_usb_initialize().
+ * @param channel Channel to setup
+ * @param pipe Pipe to start
+ */
+static void __cvmx_usb_start_channel(cvmx_usb_internal_state_t *usb,
+ int channel,
+ cvmx_usb_pipe_t *pipe)
+{
+ cvmx_usb_transaction_t *transaction = pipe->head;
+
+ CVMX_USB_LOG_CALLED();
+ CVMX_USB_LOG_PARAM("%p", usb);
+ CVMX_USB_LOG_PARAM("%d", channel);
+ CVMX_USB_LOG_PARAM("%p", pipe);
+
+ if (cvmx_unlikely((usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_DEBUG_TRANSFERS) ||
+ (pipe->flags & CVMX_USB_PIPE_FLAGS_DEBUG_TRANSFERS)))
+ cvmx_dprintf("%s: Channel %d started. Pipe %d transaction %d stage %d\n",
+ __FUNCTION__, channel, __cvmx_usb_get_pipe_handle(usb, pipe),
+ __cvmx_usb_get_submit_handle(usb, transaction),
+ transaction->stage);
+
+ /* Make sure all writes to the DMA region get flushed */
+ CVMX_SYNCW;
+
+ /* Attach the channel to the pipe */
+ usb->pipe_for_channel[channel] = pipe;
+ pipe->channel = channel;
+ pipe->flags |= __CVMX_USB_PIPE_FLAGS_SCHEDULED;
+
+ /* Mark this channel as in use */
+ usb->idle_hardware_channels &= ~(1<<channel);
+
+ /* Enable the channel interrupt bits */
+ {
+ cvmx_usbcx_hcintx_t usbc_hcint;
+ cvmx_usbcx_hcintmskx_t usbc_hcintmsk;
+ cvmx_usbcx_haintmsk_t usbc_haintmsk;
+
+ /* Clear all channel status bits */
+ usbc_hcint.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HCINTX(channel, usb->index));
+ __cvmx_usb_write_csr32(usb, CVMX_USBCX_HCINTX(channel, usb->index), usbc_hcint.u32);
+
+ usbc_hcintmsk.u32 = 0;
+ usbc_hcintmsk.s.chhltdmsk = 1;
+ if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA)
+ {
+ /* Channels need these extra interrupts when we aren't in DMA mode */
+ usbc_hcintmsk.s.datatglerrmsk = 1;
+ usbc_hcintmsk.s.frmovrunmsk = 1;
+ usbc_hcintmsk.s.bblerrmsk = 1;
+ usbc_hcintmsk.s.xacterrmsk = 1;
+ if (__cvmx_usb_pipe_needs_split(usb, pipe))
+ {
+ /* Splits don't generate xfercompl, so we need ACK and NYET */
+ usbc_hcintmsk.s.nyetmsk = 1;
+ usbc_hcintmsk.s.ackmsk = 1;
+ }
+ usbc_hcintmsk.s.nakmsk = 1;
+ usbc_hcintmsk.s.stallmsk = 1;
+ usbc_hcintmsk.s.xfercomplmsk = 1;
+ }
+ __cvmx_usb_write_csr32(usb, CVMX_USBCX_HCINTMSKX(channel, usb->index), usbc_hcintmsk.u32);
+
+ /* Enable the channel interrupt to propagate */
+ usbc_haintmsk.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HAINTMSK(usb->index));
+ usbc_haintmsk.s.haintmsk |= 1<<channel;
+ __cvmx_usb_write_csr32(usb, CVMX_USBCX_HAINTMSK(usb->index), usbc_haintmsk.u32);
+ }
+
+ /* Setup the locations the DMA engines use */
+ {
+ uint64_t dma_address = transaction->buffer + transaction->actual_bytes;
+ if (transaction->type == CVMX_USB_TRANSFER_ISOCHRONOUS)
+ dma_address = transaction->buffer + transaction->iso_packets[0].offset + transaction->actual_bytes;
+ __cvmx_usb_write_csr64(usb, CVMX_USBNX_DMA0_OUTB_CHN0(usb->index) + channel*8, dma_address);
+ __cvmx_usb_write_csr64(usb, CVMX_USBNX_DMA0_INB_CHN0(usb->index) + channel*8, dma_address);
+ }
+
+ /* Setup both the size of the transfer and the SPLIT characteristics */
+ {
+ cvmx_usbcx_hcspltx_t usbc_hcsplt = {.u32 = 0};
+ cvmx_usbcx_hctsizx_t usbc_hctsiz = {.u32 = 0};
+ int packets_to_transfer;
+ int bytes_to_transfer = transaction->buffer_length - transaction->actual_bytes;
+
+ /* ISOCHRONOUS transactions store each individual transfer size in the
+ packet structure, not the global buffer_length */
+ if (transaction->type == CVMX_USB_TRANSFER_ISOCHRONOUS)
+ bytes_to_transfer = transaction->iso_packets[0].length - transaction->actual_bytes;
+
+ /* We need to do split transactions when we are talking to non high
+ speed devices that are behind a high speed hub */
+ if (__cvmx_usb_pipe_needs_split(usb, pipe))
+ {
+ /* On the start split phase (stage is even) record the frame number we
+ will need to send the split complete. We only store the lower two bits
+ since the time ahead can only be two frames */
+ if ((transaction->stage&1) == 0)
+ {
+ if (transaction->type == CVMX_USB_TRANSFER_BULK)
+ pipe->split_sc_frame = (usb->frame_number + 1) & 0x7f;
+ else
+ pipe->split_sc_frame = (usb->frame_number + 2) & 0x7f;
+ }
+ else
+ pipe->split_sc_frame = -1;
+
+ usbc_hcsplt.s.spltena = 1;
+ usbc_hcsplt.s.hubaddr = pipe->hub_device_addr;
+ usbc_hcsplt.s.prtaddr = pipe->hub_port;
+ usbc_hcsplt.s.compsplt = (transaction->stage == CVMX_USB_STAGE_NON_CONTROL_SPLIT_COMPLETE);
+
+ /* SPLIT transactions can only ever transmit one data packet so
+ limit the transfer size to the max packet size */
+ if (bytes_to_transfer > pipe->max_packet)
+ bytes_to_transfer = pipe->max_packet;
+
+ /* ISOCHRONOUS OUT splits are unique in that they limit
+ data transfers to 188 byte chunks representing the
+ begin/middle/end of the data or all */
+ if (!usbc_hcsplt.s.compsplt &&
+ (pipe->transfer_dir == CVMX_USB_DIRECTION_OUT) &&
+ (pipe->transfer_type == CVMX_USB_TRANSFER_ISOCHRONOUS))
+ {
+ /* Clear the split complete frame number as there isn't going
+ to be a split complete */
+ pipe->split_sc_frame = -1;
+ /* See if we've started this transfer and sent data */
+ if (transaction->actual_bytes == 0)
+ {
+ /* Nothing sent yet, this is either a begin or the
+ entire payload */
+ if (bytes_to_transfer <= 188)
+ usbc_hcsplt.s.xactpos = 3; /* Entire payload in one go */
+ else
+ usbc_hcsplt.s.xactpos = 2; /* First part of payload */
+ }
+ else
+ {
+ /* Continuing the previous data, we must either be
+ in the middle or at the end */
+ if (bytes_to_transfer <= 188)
+ usbc_hcsplt.s.xactpos = 1; /* End of payload */
+ else
+ usbc_hcsplt.s.xactpos = 0; /* Middle of payload */
+ }
+ /* Again, the transfer size is limited to 188 bytes */
+ if (bytes_to_transfer > 188)
+ bytes_to_transfer = 188;
+ }
+ }
+
+ /* Make sure the transfer never exceeds the byte limit of the hardware.
+ Further bytes will be sent as continued transactions */
+ if (bytes_to_transfer > MAX_TRANSFER_BYTES)
+ {
+ /* Round MAX_TRANSFER_BYTES to a multiple of out packet size */
+ bytes_to_transfer = MAX_TRANSFER_BYTES / pipe->max_packet;
+ bytes_to_transfer *= pipe->max_packet;
+ }
+
+ /* Calculate the number of packets to transfer. If the length is zero
+ we still need to transfer one packet */
+ packets_to_transfer = (bytes_to_transfer + pipe->max_packet - 1) / pipe->max_packet;
+ if (packets_to_transfer == 0)
+ packets_to_transfer = 1;
+ else if ((packets_to_transfer>1) && (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA))
+ {
+ /* Limit to one packet when not using DMA. Channels must be restarted
+ between every packet for IN transactions, so there is no reason to
+ do multiple packets in a row */
+ packets_to_transfer = 1;
+ bytes_to_transfer = packets_to_transfer * pipe->max_packet;
+ }
+ else if (packets_to_transfer > MAX_TRANSFER_PACKETS)
+ {
+ /* Limit the number of packet and data transferred to what the
+ hardware can handle */
+ packets_to_transfer = MAX_TRANSFER_PACKETS;
+ bytes_to_transfer = packets_to_transfer * pipe->max_packet;
+ }
+
+ usbc_hctsiz.s.xfersize = bytes_to_transfer;
+ usbc_hctsiz.s.pktcnt = packets_to_transfer;
+
+ /* Update the DATA0/DATA1 toggle */
+ usbc_hctsiz.s.pid = __cvmx_usb_get_data_pid(pipe);
+ /* High speed pipes may need a hardware ping before they start */
+ if (pipe->flags & __CVMX_USB_PIPE_FLAGS_NEED_PING)
+ usbc_hctsiz.s.dopng = 1;
+
+ __cvmx_usb_write_csr32(usb, CVMX_USBCX_HCSPLTX(channel, usb->index), usbc_hcsplt.u32);
+ __cvmx_usb_write_csr32(usb, CVMX_USBCX_HCTSIZX(channel, usb->index), usbc_hctsiz.u32);
+ }
+
+ /* Setup the Host Channel Characteristics Register */
+ {
+ cvmx_usbcx_hccharx_t usbc_hcchar = {.u32 = 0};
+
+ /* Set the startframe odd/even properly. This is only used for periodic */
+ usbc_hcchar.s.oddfrm = usb->frame_number&1;
+
+ /* Set the number of back to back packets allowed by this endpoint.
+ Split transactions interpret "ec" as the number of immediate
+ retries of failure. These retries happen too quickly, so we
+ disable these entirely for splits */
+ if (__cvmx_usb_pipe_needs_split(usb, pipe))
+ usbc_hcchar.s.ec = 1;
+ else if (pipe->multi_count < 1)
+ usbc_hcchar.s.ec = 1;
+ else if (pipe->multi_count > 3)
+ usbc_hcchar.s.ec = 3;
+ else
+ usbc_hcchar.s.ec = pipe->multi_count;
+
+ /* Set the rest of the endpoint specific settings */
+ usbc_hcchar.s.devaddr = pipe->device_addr;
+ usbc_hcchar.s.eptype = transaction->type;
+ usbc_hcchar.s.lspddev = (pipe->device_speed == CVMX_USB_SPEED_LOW);
+ usbc_hcchar.s.epdir = pipe->transfer_dir;
+ usbc_hcchar.s.epnum = pipe->endpoint_num;
+ usbc_hcchar.s.mps = pipe->max_packet;
+ __cvmx_usb_write_csr32(usb, CVMX_USBCX_HCCHARX(channel, usb->index), usbc_hcchar.u32);
+ }
+
+ /* Do transaction type specific fixups as needed */
+ switch (transaction->type)
+ {
+ case CVMX_USB_TRANSFER_CONTROL:
+ __cvmx_usb_start_channel_control(usb, channel, pipe);
+ break;
+ case CVMX_USB_TRANSFER_BULK:
+ case CVMX_USB_TRANSFER_INTERRUPT:
+ break;
+ case CVMX_USB_TRANSFER_ISOCHRONOUS:
+ if (!__cvmx_usb_pipe_needs_split(usb, pipe))
+ {
+ /* ISO transactions require different PIDs depending on direction
+ and how many packets are needed */
+ if (pipe->transfer_dir == CVMX_USB_DIRECTION_OUT)
+ {
+ if (pipe->multi_count < 2) /* Need DATA0 */
+ USB_SET_FIELD32(CVMX_USBCX_HCTSIZX(channel, usb->index), cvmx_usbcx_hctsizx_t, pid, 0);
+ else /* Need MDATA */
+ USB_SET_FIELD32(CVMX_USBCX_HCTSIZX(channel, usb->index), cvmx_usbcx_hctsizx_t, pid, 3);
+ }
+ }
+ break;
+ }
+ {
+ cvmx_usbcx_hctsizx_t usbc_hctsiz = {.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HCTSIZX(channel, usb->index))};
+ transaction->xfersize = usbc_hctsiz.s.xfersize;
+ transaction->pktcnt = usbc_hctsiz.s.pktcnt;
+ }
+ /* Remeber when we start a split transaction */
+ if (__cvmx_usb_pipe_needs_split(usb, pipe))
+ usb->active_split = transaction;
+ USB_SET_FIELD32(CVMX_USBCX_HCCHARX(channel, usb->index), cvmx_usbcx_hccharx_t, chena, 1);
+ if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA)
+ __cvmx_usb_fill_tx_fifo(usb, channel);
+ CVMX_USB_RETURN_NOTHING();
+}
+
+
+/**
+ * @INTERNAL
+ * Find a pipe that is ready to be scheduled to hardware.
+ * @param usb USB device state populated by
+ * cvmx_usb_initialize().
+ * @param list Pipe list to search
+ * @param current_frame
+ * Frame counter to use as a time reference.
+ *
+ * @return Pipe or NULL if none are ready
+ */
+static cvmx_usb_pipe_t *__cvmx_usb_find_ready_pipe(cvmx_usb_internal_state_t *usb, cvmx_usb_pipe_list_t *list, uint64_t current_frame)
+{
+ cvmx_usb_pipe_t *pipe = list->head;
+ while (pipe)
+ {
+ if (!(pipe->flags & __CVMX_USB_PIPE_FLAGS_SCHEDULED) && pipe->head &&
+ (pipe->next_tx_frame <= current_frame) &&
+ ((pipe->split_sc_frame == -1) || ((((int)current_frame - (int)pipe->split_sc_frame) & 0x7f) < 0x40)) &&
+ (!usb->active_split || (usb->active_split == pipe->head)))
+ {
+ CVMX_PREFETCH(pipe, 128);
+ CVMX_PREFETCH(pipe->head, 0);
+ return pipe;
+ }
+ pipe = pipe->next;
+ }
+ return NULL;
+}
+
+
+/**
+ * @INTERNAL
+ * Called whenever a pipe might need to be scheduled to the
+ * hardware.
+ *
+ * @param usb USB device state populated by
+ * cvmx_usb_initialize().
+ * @param is_sof True if this schedule was called on a SOF interrupt.
+ */
+static void __cvmx_usb_schedule(cvmx_usb_internal_state_t *usb, int is_sof)
+{
+ int channel;
+ cvmx_usb_pipe_t *pipe;
+ int need_sof;
+ cvmx_usb_transfer_t ttype;
+
+ CVMX_USB_LOG_CALLED();
+ CVMX_USB_LOG_PARAM("%p", usb);
+
+ if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA)
+ {
+ /* Without DMA we need to be careful to not schedule something at the end of a frame and cause an overrun */
+ cvmx_usbcx_hfnum_t hfnum = {.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HFNUM(usb->index))};
+ cvmx_usbcx_hfir_t hfir = {.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HFIR(usb->index))};
+ if (hfnum.s.frrem < hfir.s.frint/4)
+ goto done;
+ }
+
+ while (usb->idle_hardware_channels)
+ {
+ /* Find an idle channel */
+ CVMX_CLZ(channel, usb->idle_hardware_channels);
+ channel = 31 - channel;
+ if (cvmx_unlikely(channel > 7))
+ {
+ if (cvmx_unlikely(usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_DEBUG_INFO))
+ cvmx_dprintf("%s: Idle hardware channels has a channel higher than 7. This is wrong\n", __FUNCTION__);
+ break;
+ }
+
+ /* Find a pipe needing service */
+ pipe = NULL;
+ if (is_sof)
+ {
+ /* Only process periodic pipes on SOF interrupts. This way we are
+ sure that the periodic data is sent in the beginning of the
+ frame */
+ pipe = __cvmx_usb_find_ready_pipe(usb, usb->active_pipes + CVMX_USB_TRANSFER_ISOCHRONOUS, usb->frame_number);
+ if (cvmx_likely(!pipe))
+ pipe = __cvmx_usb_find_ready_pipe(usb, usb->active_pipes + CVMX_USB_TRANSFER_INTERRUPT, usb->frame_number);
+ }
+ if (cvmx_likely(!pipe))
+ {
+ pipe = __cvmx_usb_find_ready_pipe(usb, usb->active_pipes + CVMX_USB_TRANSFER_CONTROL, usb->frame_number);
+ if (cvmx_likely(!pipe))
+ pipe = __cvmx_usb_find_ready_pipe(usb, usb->active_pipes + CVMX_USB_TRANSFER_BULK, usb->frame_number);
+ }
+ if (!pipe)
+ break;
+
+ CVMX_USB_LOG_PARAM("%d", channel);
+ CVMX_USB_LOG_PARAM("%p", pipe);
+
+ if (cvmx_unlikely((usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_DEBUG_TRANSFERS) ||
+ (pipe->flags & CVMX_USB_PIPE_FLAGS_DEBUG_TRANSFERS)))
+ {
+ cvmx_usb_transaction_t *transaction = pipe->head;
+ const cvmx_usb_control_header_t *header = (transaction->control_header) ? cvmx_phys_to_ptr(transaction->control_header) : NULL;
+ const char *dir = (pipe->transfer_dir == CVMX_USB_DIRECTION_IN) ? "IN" : "OUT";
+ const char *type;
+ switch (pipe->transfer_type)
+ {
+ case CVMX_USB_TRANSFER_CONTROL:
+ type = "SETUP";
+ dir = (header->s.request_type & 0x80) ? "IN" : "OUT";
+ break;
+ case CVMX_USB_TRANSFER_ISOCHRONOUS:
+ type = "ISOCHRONOUS";
+ break;
+ case CVMX_USB_TRANSFER_BULK:
+ type = "BULK";
+ break;
+ default: /* CVMX_USB_TRANSFER_INTERRUPT */
+ type = "INTERRUPT";
+ break;
+ }
+ cvmx_dprintf("%s: Starting pipe %d, transaction %d on channel %d. %s %s len=%d header=0x%llx\n",
+ __FUNCTION__, __cvmx_usb_get_pipe_handle(usb, pipe),
+ __cvmx_usb_get_submit_handle(usb, transaction),
+ channel, type, dir,
+ transaction->buffer_length,
+ (header) ? (unsigned long long)header->u64 : 0ull);
+ }
+ __cvmx_usb_start_channel(usb, channel, pipe);
+ }
+
+done:
+ /* Only enable SOF interrupts when we have transactions pending in the
+ future that might need to be scheduled */
+ need_sof = 0;
+ for (ttype=CVMX_USB_TRANSFER_CONTROL; ttype<=CVMX_USB_TRANSFER_INTERRUPT; ttype++)
+ {
+ pipe = usb->active_pipes[ttype].head;
+ while (pipe)
+ {
+ if (pipe->next_tx_frame > usb->frame_number)
+ {
+ need_sof = 1;
+ break;
+ }
+ pipe=pipe->next;
+ }
+ }
+ USB_SET_FIELD32(CVMX_USBCX_GINTMSK(usb->index), cvmx_usbcx_gintmsk_t, sofmsk, need_sof);
+ CVMX_USB_RETURN_NOTHING();
+}
+
+
+/**
+ * @INTERNAL
+ * Call a user's callback for a specific reason.
+ *
+ * @param usb USB device state populated by
+ * cvmx_usb_initialize().
+ * @param pipe Pipe the callback is for or NULL
+ * @param transaction
+ * Transaction the callback is for or NULL
+ * @param reason Reason this callback is being called
+ * @param complete_code
+ * Completion code for the transaction, if any
+ */
+static void __cvmx_usb_perform_callback(cvmx_usb_internal_state_t *usb,
+ cvmx_usb_pipe_t *pipe,
+ cvmx_usb_transaction_t *transaction,
+ cvmx_usb_callback_t reason,
+ cvmx_usb_complete_t complete_code)
+{
+ cvmx_usb_callback_func_t callback = usb->callback[reason];
+ void *user_data = usb->callback_data[reason];
+ int submit_handle = -1;
+ int pipe_handle = -1;
+ int bytes_transferred = 0;
+
+ if (pipe)
+ pipe_handle = __cvmx_usb_get_pipe_handle(usb, pipe);
+
+ if (transaction)
+ {
+ submit_handle = __cvmx_usb_get_submit_handle(usb, transaction);
+ bytes_transferred = transaction->actual_bytes;
+ /* Transactions are allowed to override the default callback */
+ if ((reason == CVMX_USB_CALLBACK_TRANSFER_COMPLETE) && transaction->callback)
+ {
+ callback = transaction->callback;
+ user_data = transaction->callback_data;
+ }
+ }
+
+ if (!callback)
+ return;
+
+ if (cvmx_unlikely(usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_DEBUG_CALLBACKS))
+ cvmx_dprintf("%*s%s: calling callback %p(usb=%p, complete_code=%s, "
+ "pipe_handle=%d, submit_handle=%d, bytes_transferred=%d, user_data=%p);\n",
+ 2*usb->indent, "", __FUNCTION__, callback, usb,
+ __cvmx_usb_complete_to_string(complete_code),
+ pipe_handle, submit_handle, bytes_transferred, user_data);
+
+ callback((cvmx_usb_state_t *)usb, reason, complete_code, pipe_handle, submit_handle,
+ bytes_transferred, user_data);
+
+ if (cvmx_unlikely(usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_DEBUG_CALLBACKS))
+ cvmx_dprintf("%*s%s: callback %p complete\n", 2*usb->indent, "",
+ __FUNCTION__, callback);
+}
+
+
+/**
+ * @INTERNAL
+ * Signal the completion of a transaction and free it. The
+ * transaction will be removed from the pipe transaction list.
+ *
+ * @param usb USB device state populated by
+ * cvmx_usb_initialize().
+ * @param pipe Pipe the transaction is on
+ * @param transaction
+ * Transaction that completed
+ * @param complete_code
+ * Completion code
+ */
+static void __cvmx_usb_perform_complete(cvmx_usb_internal_state_t * usb,
+ cvmx_usb_pipe_t *pipe,
+ cvmx_usb_transaction_t *transaction,
+ cvmx_usb_complete_t complete_code)
+{
+ CVMX_USB_LOG_CALLED();
+ CVMX_USB_LOG_PARAM("%p", usb);
+ CVMX_USB_LOG_PARAM("%p", pipe);
+ CVMX_USB_LOG_PARAM("%p", transaction);
+ CVMX_USB_LOG_PARAM("%d", complete_code);
+
+ /* If this was a split then clear our split in progress marker */
+ if (usb->active_split == transaction)
+ usb->active_split = NULL;
+
+ /* Isochronous transactions need extra processing as they might not be done
+ after a single data transfer */
+ if (cvmx_unlikely(transaction->type == CVMX_USB_TRANSFER_ISOCHRONOUS))
+ {
+ /* Update the number of bytes transferred in this ISO packet */
+ transaction->iso_packets[0].length = transaction->actual_bytes;
+ transaction->iso_packets[0].status = complete_code;
+
+ /* If there are more ISOs pending and we succeeded, schedule the next
+ one */
+ if ((transaction->iso_number_packets > 1) && (complete_code == CVMX_USB_COMPLETE_SUCCESS))
+ {
+ transaction->actual_bytes = 0; /* No bytes transferred for this packet as of yet */
+ transaction->iso_number_packets--; /* One less ISO waiting to transfer */
+ transaction->iso_packets++; /* Increment to the next location in our packet array */
+ transaction->stage = CVMX_USB_STAGE_NON_CONTROL;
+ goto done;
+ }
+ }
+
+ /* Remove the transaction from the pipe list */
+ if (transaction->next)
+ transaction->next->prev = transaction->prev;
+ else
+ pipe->tail = transaction->prev;
+ if (transaction->prev)
+ transaction->prev->next = transaction->next;
+ else
+ pipe->head = transaction->next;
+ if (!pipe->head)
+ {
+ __cvmx_usb_remove_pipe(usb->active_pipes + pipe->transfer_type, pipe);
+ __cvmx_usb_append_pipe(&usb->idle_pipes, pipe);
+
+ }
+ __cvmx_usb_perform_callback(usb, pipe, transaction,
+ CVMX_USB_CALLBACK_TRANSFER_COMPLETE,
+ complete_code);
+ __cvmx_usb_free_transaction(usb, transaction);
+done:
+ CVMX_USB_RETURN_NOTHING();
+}
+
+
+/**
+ * @INTERNAL
+ * Submit a usb transaction to a pipe. Called for all types
+ * of transactions.
+ *
+ * @param usb
+ * @param pipe_handle
+ * Which pipe to submit to. Will be validated in this function.
+ * @param type Transaction type
+ * @param flags Flags for the transaction
+ * @param buffer User buffer for the transaction
+ * @param buffer_length
+ * User buffer's length in bytes
+ * @param control_header
+ * For control transactions, the 8 byte standard header
+ * @param iso_start_frame
+ * For ISO transactions, the start frame
+ * @param iso_number_packets
+ * For ISO, the number of packet in the transaction.
+ * @param iso_packets
+ * A description of each ISO packet
+ * @param callback User callback to call when the transaction completes
+ * @param user_data User's data for the callback
+ *
+ * @return Submit handle or negative on failure. Matches the result
+ * in the external API.
+ */
+static int __cvmx_usb_submit_transaction(cvmx_usb_internal_state_t *usb,
+ int pipe_handle,
+ cvmx_usb_transfer_t type,
+ int flags,
+ uint64_t buffer,
+ int buffer_length,
+ uint64_t control_header,
+ int iso_start_frame,
+ int iso_number_packets,
+ cvmx_usb_iso_packet_t *iso_packets,
+ cvmx_usb_callback_func_t callback,
+ void *user_data)
+{
+ int submit_handle;
+ cvmx_usb_transaction_t *transaction;
+ cvmx_usb_pipe_t *pipe = usb->pipe + pipe_handle;
+
+ CVMX_USB_LOG_CALLED();
+ if (cvmx_unlikely((pipe_handle < 0) || (pipe_handle >= MAX_PIPES)))
+ CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
+ /* Fail if the pipe isn't open */
+ if (cvmx_unlikely((pipe->flags & __CVMX_USB_PIPE_FLAGS_OPEN) == 0))
+ CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
+ if (cvmx_unlikely(pipe->transfer_type != type))
+ CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
+
+ transaction = __cvmx_usb_alloc_transaction(usb);
+ if (cvmx_unlikely(!transaction))
+ CVMX_USB_RETURN(CVMX_USB_NO_MEMORY);
+
+ transaction->type = type;
+ transaction->flags |= flags;
+ transaction->buffer = buffer;
+ transaction->buffer_length = buffer_length;
+ transaction->control_header = control_header;
+ transaction->iso_start_frame = iso_start_frame; // FIXME: This is not used, implement it
+ transaction->iso_number_packets = iso_number_packets;
+ transaction->iso_packets = iso_packets;
+ transaction->callback = callback;
+ transaction->callback_data = user_data;
+ if (transaction->type == CVMX_USB_TRANSFER_CONTROL)
+ transaction->stage = CVMX_USB_STAGE_SETUP;
+ else
+ transaction->stage = CVMX_USB_STAGE_NON_CONTROL;
+
+ transaction->next = NULL;
+ if (pipe->tail)
+ {
+ transaction->prev = pipe->tail;
+ transaction->prev->next = transaction;
+ }
+ else
+ {
+ if (pipe->next_tx_frame < usb->frame_number)
+ pipe->next_tx_frame = usb->frame_number + pipe->interval -
+ (usb->frame_number - pipe->next_tx_frame) % pipe->interval;
+ transaction->prev = NULL;
+ pipe->head = transaction;
+ __cvmx_usb_remove_pipe(&usb->idle_pipes, pipe);
+ __cvmx_usb_append_pipe(usb->active_pipes + pipe->transfer_type, pipe);
+ }
+ pipe->tail = transaction;
+
+ submit_handle = __cvmx_usb_get_submit_handle(usb, transaction);
+
+ /* We may need to schedule the pipe if this was the head of the pipe */
+ if (!transaction->prev)
+ __cvmx_usb_schedule(usb, 0);
+
+ CVMX_USB_RETURN(submit_handle);
+}
+
+
+/**
+ * Call to submit a USB Bulk transfer to a pipe.
+ *
+ * @param state USB device state populated by
+ * cvmx_usb_initialize().
+ * @param pipe_handle
+ * Handle to the pipe for the transfer.
+ * @param buffer Physical address of the data buffer in
+ * memory. Note that this is NOT A POINTER, but
+ * the full 64bit physical address of the
+ * buffer. This may be zero if buffer_length is
+ * zero.
+ * @param buffer_length
+ * Length of buffer in bytes.
+ * @param callback Function to call when this transaction
+ * completes. If the return value of this
+ * function isn't an error, then this function
+ * is guaranteed to be called when the
+ * transaction completes. If this parameter is
+ * NULL, then the generic callback registered
+ * through cvmx_usb_register_callback is
+ * called. If both are NULL, then there is no
+ * way to know when a transaction completes.
+ * @param user_data User supplied data returned when the
+ * callback is called. This is only used if
+ * callback in not NULL.
+ *
+ * @return A submitted transaction handle or negative on
+ * failure. Negative values are failure codes from
+ * cvmx_usb_status_t.
+ */
+int cvmx_usb_submit_bulk(cvmx_usb_state_t *state, int pipe_handle,
+ uint64_t buffer, int buffer_length,
+ cvmx_usb_callback_func_t callback,
+ void *user_data)
+{
+ int submit_handle;
+ cvmx_usb_internal_state_t *usb = (cvmx_usb_internal_state_t*)state;
+
+ CVMX_USB_LOG_CALLED();
+ CVMX_USB_LOG_PARAM("%p", state);
+ CVMX_USB_LOG_PARAM("%d", pipe_handle);
+ CVMX_USB_LOG_PARAM("0x%llx", (unsigned long long)buffer);
+ CVMX_USB_LOG_PARAM("%d", buffer_length);
+
+ /* Pipe handle checking is done later in a common place */
+ if (cvmx_unlikely(!buffer))
+ CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
+ if (cvmx_unlikely(buffer_length < 0))
+ CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
+
+ submit_handle = __cvmx_usb_submit_transaction(usb, pipe_handle,
+ CVMX_USB_TRANSFER_BULK,
+ 0, /* flags */
+ buffer,
+ buffer_length,
+ 0, /* control_header */
+ 0, /* iso_start_frame */
+ 0, /* iso_number_packets */
+ NULL, /* iso_packets */
+ callback,
+ user_data);
+ CVMX_USB_RETURN(submit_handle);
+}
+
+
+/**
+ * Call to submit a USB Interrupt transfer to a pipe.
+ *
+ * @param state USB device state populated by
+ * cvmx_usb_initialize().
+ * @param pipe_handle
+ * Handle to the pipe for the transfer.
+ * @param buffer Physical address of the data buffer in
+ * memory. Note that this is NOT A POINTER, but
+ * the full 64bit physical address of the
+ * buffer. This may be zero if buffer_length is
+ * zero.
+ * @param buffer_length
+ * Length of buffer in bytes.
+ * @param callback Function to call when this transaction
+ * completes. If the return value of this
+ * function isn't an error, then this function
+ * is guaranteed to be called when the
+ * transaction completes. If this parameter is
+ * NULL, then the generic callback registered
+ * through cvmx_usb_register_callback is
+ * called. If both are NULL, then there is no
+ * way to know when a transaction completes.
+ * @param user_data User supplied data returned when the
+ * callback is called. This is only used if
+ * callback in not NULL.
+ *
+ * @return A submitted transaction handle or negative on
+ * failure. Negative values are failure codes from
+ * cvmx_usb_status_t.
+ */
+int cvmx_usb_submit_interrupt(cvmx_usb_state_t *state, int pipe_handle,
+ uint64_t buffer, int buffer_length,
+ cvmx_usb_callback_func_t callback,
+ void *user_data)
+{
+ int submit_handle;
+ cvmx_usb_internal_state_t *usb = (cvmx_usb_internal_state_t*)state;
+
+ CVMX_USB_LOG_CALLED();
+ CVMX_USB_LOG_PARAM("%p", state);
+ CVMX_USB_LOG_PARAM("%d", pipe_handle);
+ CVMX_USB_LOG_PARAM("0x%llx", (unsigned long long)buffer);
+ CVMX_USB_LOG_PARAM("%d", buffer_length);
+
+ /* Pipe handle checking is done later in a common place */
+ if (cvmx_unlikely(!buffer))
+ CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
+ if (cvmx_unlikely(buffer_length < 0))
+ CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
+
+ submit_handle = __cvmx_usb_submit_transaction(usb, pipe_handle,
+ CVMX_USB_TRANSFER_INTERRUPT,
+ 0, /* flags */
+ buffer,
+ buffer_length,
+ 0, /* control_header */
+ 0, /* iso_start_frame */
+ 0, /* iso_number_packets */
+ NULL, /* iso_packets */
+ callback,
+ user_data);
+ CVMX_USB_RETURN(submit_handle);
+}
+
+
+/**
+ * Call to submit a USB Control transfer to a pipe.
+ *
+ * @param state USB device state populated by
+ * cvmx_usb_initialize().
+ * @param pipe_handle
+ * Handle to the pipe for the transfer.
+ * @param control_header
+ * USB 8 byte control header physical address.
+ * Note that this is NOT A POINTER, but the
+ * full 64bit physical address of the buffer.
+ * @param buffer Physical address of the data buffer in
+ * memory. Note that this is NOT A POINTER, but
+ * the full 64bit physical address of the
+ * buffer. This may be zero if buffer_length is
+ * zero.
+ * @param buffer_length
+ * Length of buffer in bytes.
+ * @param callback Function to call when this transaction
+ * completes. If the return value of this
+ * function isn't an error, then this function
+ * is guaranteed to be called when the
+ * transaction completes. If this parameter is
+ * NULL, then the generic callback registered
+ * through cvmx_usb_register_callback is
+ * called. If both are NULL, then there is no
+ * way to know when a transaction completes.
+ * @param user_data User supplied data returned when the
+ * callback is called. This is only used if
+ * callback in not NULL.
+ *
+ * @return A submitted transaction handle or negative on
+ * failure. Negative values are failure codes from
+ * cvmx_usb_status_t.
+ */
+int cvmx_usb_submit_control(cvmx_usb_state_t *state, int pipe_handle,
+ uint64_t control_header,
+ uint64_t buffer, int buffer_length,
+ cvmx_usb_callback_func_t callback,
+ void *user_data)
+{
+ int submit_handle;
+ cvmx_usb_internal_state_t *usb = (cvmx_usb_internal_state_t*)state;
+ cvmx_usb_control_header_t *header = cvmx_phys_to_ptr(control_header);
+
+ CVMX_USB_LOG_CALLED();
+ CVMX_USB_LOG_PARAM("%p", state);
+ CVMX_USB_LOG_PARAM("%d", pipe_handle);
+ CVMX_USB_LOG_PARAM("0x%llx", (unsigned long long)control_header);
+ CVMX_USB_LOG_PARAM("0x%llx", (unsigned long long)buffer);
+ CVMX_USB_LOG_PARAM("%d", buffer_length);
+
+ /* Pipe handle checking is done later in a common place */
+ if (cvmx_unlikely(!control_header))
+ CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
+ /* Some drivers send a buffer with a zero length. God only knows why */
+ if (cvmx_unlikely(buffer && (buffer_length < 0)))
+ CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
+ if (cvmx_unlikely(!buffer && (buffer_length != 0)))
+ CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
+ if ((header->s.request_type & 0x80) == 0)
+ buffer_length = cvmx_le16_to_cpu(header->s.length);
+
+ submit_handle = __cvmx_usb_submit_transaction(usb, pipe_handle,
+ CVMX_USB_TRANSFER_CONTROL,
+ 0, /* flags */
+ buffer,
+ buffer_length,
+ control_header,
+ 0, /* iso_start_frame */
+ 0, /* iso_number_packets */
+ NULL, /* iso_packets */
+ callback,
+ user_data);
+ CVMX_USB_RETURN(submit_handle);
+}
+
+
+/**
+ * Call to submit a USB Isochronous transfer to a pipe.
+ *
+ * @param state USB device state populated by
+ * cvmx_usb_initialize().
+ * @param pipe_handle
+ * Handle to the pipe for the transfer.
+ * @param start_frame
+ * Number of frames into the future to schedule
+ * this transaction.
+ * @param flags Flags to control the transfer. See
+ * cvmx_usb_isochronous_flags_t for the flag
+ * definitions.
+ * @param number_packets
+ * Number of sequential packets to transfer.
+ * "packets" is a pointer to an array of this
+ * many packet structures.
+ * @param packets Description of each transfer packet as
+ * defined by cvmx_usb_iso_packet_t. The array
+ * pointed to here must stay valid until the
+ * complete callback is called.
+ * @param buffer Physical address of the data buffer in
+ * memory. Note that this is NOT A POINTER, but
+ * the full 64bit physical address of the
+ * buffer. This may be zero if buffer_length is
+ * zero.
+ * @param buffer_length
+ * Length of buffer in bytes.
+ * @param callback Function to call when this transaction
+ * completes. If the return value of this
+ * function isn't an error, then this function
+ * is guaranteed to be called when the
+ * transaction completes. If this parameter is
+ * NULL, then the generic callback registered
+ * through cvmx_usb_register_callback is
+ * called. If both are NULL, then there is no
+ * way to know when a transaction completes.
+ * @param user_data User supplied data returned when the
+ * callback is called. This is only used if
+ * callback in not NULL.
+ *
+ * @return A submitted transaction handle or negative on
+ * failure. Negative values are failure codes from
+ * cvmx_usb_status_t.
+ */
+int cvmx_usb_submit_isochronous(cvmx_usb_state_t *state, int pipe_handle,
+ int start_frame, int flags,
+ int number_packets,
+ cvmx_usb_iso_packet_t packets[],
+ uint64_t buffer, int buffer_length,
+ cvmx_usb_callback_func_t callback,
+ void *user_data)
+{
+ int submit_handle;
+ cvmx_usb_internal_state_t *usb = (cvmx_usb_internal_state_t*)state;
+
+ CVMX_USB_LOG_CALLED();
+ CVMX_USB_LOG_PARAM("%p", state);
+ CVMX_USB_LOG_PARAM("%d", pipe_handle);
+ CVMX_USB_LOG_PARAM("%d", start_frame);
+ CVMX_USB_LOG_PARAM("0x%x", flags);
+ CVMX_USB_LOG_PARAM("%d", number_packets);
+ CVMX_USB_LOG_PARAM("%p", packets);
+ CVMX_USB_LOG_PARAM("0x%llx", (unsigned long long)buffer);
+ CVMX_USB_LOG_PARAM("%d", buffer_length);
+
+ /* Pipe handle checking is done later in a common place */
+ if (cvmx_unlikely(start_frame < 0))
+ CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
+ if (cvmx_unlikely(flags & ~(CVMX_USB_ISOCHRONOUS_FLAGS_ALLOW_SHORT | CVMX_USB_ISOCHRONOUS_FLAGS_ASAP)))
+ CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
+ if (cvmx_unlikely(number_packets < 1))
+ CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
+ if (cvmx_unlikely(!packets))
+ CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
+ if (cvmx_unlikely(!buffer))
+ CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
+ if (cvmx_unlikely(buffer_length < 0))
+ CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
+
+ submit_handle = __cvmx_usb_submit_transaction(usb, pipe_handle,
+ CVMX_USB_TRANSFER_ISOCHRONOUS,
+ flags,
+ buffer,
+ buffer_length,
+ 0, /* control_header */
+ start_frame,
+ number_packets,
+ packets,
+ callback,
+ user_data);
+ CVMX_USB_RETURN(submit_handle);
+}
+
+
+/**
+ * Cancel one outstanding request in a pipe. Canceling a request
+ * can fail if the transaction has already completed before cancel
+ * is called. Even after a successful cancel call, it may take
+ * a frame or two for the cvmx_usb_poll() function to call the
+ * associated callback.
+ *
+ * @param state USB device state populated by
+ * cvmx_usb_initialize().
+ * @param pipe_handle
+ * Pipe handle to cancel requests in.
+ * @param submit_handle
+ * Handle to transaction to cancel, returned by the submit function.
+ *
+ * @return CVMX_USB_SUCCESS or a negative error code defined in
+ * cvmx_usb_status_t.
+ */
+cvmx_usb_status_t cvmx_usb_cancel(cvmx_usb_state_t *state, int pipe_handle,
+ int submit_handle)
+{
+ cvmx_usb_transaction_t *transaction;
+ cvmx_usb_internal_state_t *usb = (cvmx_usb_internal_state_t*)state;
+ cvmx_usb_pipe_t *pipe = usb->pipe + pipe_handle;
+
+ CVMX_USB_LOG_CALLED();
+ CVMX_USB_LOG_PARAM("%p", state);
+ CVMX_USB_LOG_PARAM("%d", pipe_handle);
+ CVMX_USB_LOG_PARAM("%d", submit_handle);
+
+ if (cvmx_unlikely((pipe_handle < 0) || (pipe_handle >= MAX_PIPES)))
+ CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
+ if (cvmx_unlikely((submit_handle < 0) || (submit_handle >= MAX_TRANSACTIONS)))
+ CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
+
+ /* Fail if the pipe isn't open */
+ if (cvmx_unlikely((pipe->flags & __CVMX_USB_PIPE_FLAGS_OPEN) == 0))
+ CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
+
+ transaction = usb->transaction + submit_handle;
+
+ /* Fail if this transaction already completed */
+ if (cvmx_unlikely((transaction->flags & __CVMX_USB_TRANSACTION_FLAGS_IN_USE) == 0))
+ CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
+
+ /* If the transaction is the HEAD of the queue and scheduled. We need to
+ treat it special */
+ if ((pipe->head == transaction) &&
+ (pipe->flags & __CVMX_USB_PIPE_FLAGS_SCHEDULED))
+ {
+ cvmx_usbcx_hccharx_t usbc_hcchar;
+
+ usb->pipe_for_channel[pipe->channel] = NULL;
+ pipe->flags &= ~__CVMX_USB_PIPE_FLAGS_SCHEDULED;
+
+ CVMX_SYNCW;
+
+ usbc_hcchar.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HCCHARX(pipe->channel, usb->index));
+ /* If the channel isn't enabled then the transaction already completed */
+ if (usbc_hcchar.s.chena)
+ {
+ usbc_hcchar.s.chdis = 1;
+ __cvmx_usb_write_csr32(usb, CVMX_USBCX_HCCHARX(pipe->channel, usb->index), usbc_hcchar.u32);
+ }
+ }
+ __cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_CANCEL);
+ CVMX_USB_RETURN(CVMX_USB_SUCCESS);
+}
+
+
+/**
+ * Cancel all outstanding requests in a pipe. Logically all this
+ * does is call cvmx_usb_cancel() in a loop.
+ *
+ * @param state USB device state populated by
+ * cvmx_usb_initialize().
+ * @param pipe_handle
+ * Pipe handle to cancel requests in.
+ *
+ * @return CVMX_USB_SUCCESS or a negative error code defined in
+ * cvmx_usb_status_t.
+ */
+cvmx_usb_status_t cvmx_usb_cancel_all(cvmx_usb_state_t *state, int pipe_handle)
+{
+ cvmx_usb_internal_state_t *usb = (cvmx_usb_internal_state_t*)state;
+ cvmx_usb_pipe_t *pipe = usb->pipe + pipe_handle;
+
+ CVMX_USB_LOG_CALLED();
+ CVMX_USB_LOG_PARAM("%p", state);
+ CVMX_USB_LOG_PARAM("%d", pipe_handle);
+ if (cvmx_unlikely((pipe_handle < 0) || (pipe_handle >= MAX_PIPES)))
+ CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
+
+ /* Fail if the pipe isn't open */
+ if (cvmx_unlikely((pipe->flags & __CVMX_USB_PIPE_FLAGS_OPEN) == 0))
+ CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
+
+ /* Simply loop through and attempt to cancel each transaction */
+ while (pipe->head)
+ {
+ cvmx_usb_status_t result = cvmx_usb_cancel(state, pipe_handle,
+ __cvmx_usb_get_submit_handle(usb, pipe->head));
+ if (cvmx_unlikely(result != CVMX_USB_SUCCESS))
+ CVMX_USB_RETURN(result);
+ }
+ CVMX_USB_RETURN(CVMX_USB_SUCCESS);
+}
+
+
+/**
+ * Close a pipe created with cvmx_usb_open_pipe().
+ *
+ * @param state USB device state populated by
+ * cvmx_usb_initialize().
+ * @param pipe_handle
+ * Pipe handle to close.
+ *
+ * @return CVMX_USB_SUCCESS or a negative error code defined in
+ * cvmx_usb_status_t. CVMX_USB_BUSY is returned if the
+ * pipe has outstanding transfers.
+ */
+cvmx_usb_status_t cvmx_usb_close_pipe(cvmx_usb_state_t *state, int pipe_handle)
+{
+ cvmx_usb_internal_state_t *usb = (cvmx_usb_internal_state_t*)state;
+ cvmx_usb_pipe_t *pipe = usb->pipe + pipe_handle;
+
+ CVMX_USB_LOG_CALLED();
+ CVMX_USB_LOG_PARAM("%p", state);
+ CVMX_USB_LOG_PARAM("%d", pipe_handle);
+ if (cvmx_unlikely((pipe_handle < 0) || (pipe_handle >= MAX_PIPES)))
+ CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
+
+ /* Fail if the pipe isn't open */
+ if (cvmx_unlikely((pipe->flags & __CVMX_USB_PIPE_FLAGS_OPEN) == 0))
+ CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
+
+ /* Fail if the pipe has pending transactions */
+ if (cvmx_unlikely(pipe->head))
+ CVMX_USB_RETURN(CVMX_USB_BUSY);
+
+ pipe->flags = 0;
+ __cvmx_usb_remove_pipe(&usb->idle_pipes, pipe);
+ __cvmx_usb_append_pipe(&usb->free_pipes, pipe);
+
+ CVMX_USB_RETURN(CVMX_USB_SUCCESS);
+}
+
+
+/**
+ * Register a function to be called when various USB events occur.
+ *
+ * @param state USB device state populated by
+ * cvmx_usb_initialize().
+ * @param reason Which event to register for.
+ * @param callback Function to call when the event occurs.
+ * @param user_data User data parameter to the function.
+ *
+ * @return CVMX_USB_SUCCESS or a negative error code defined in
+ * cvmx_usb_status_t.
+ */
+cvmx_usb_status_t cvmx_usb_register_callback(cvmx_usb_state_t *state,
+ cvmx_usb_callback_t reason,
+ cvmx_usb_callback_func_t callback,
+ void *user_data)
+{
+ cvmx_usb_internal_state_t *usb = (cvmx_usb_internal_state_t*)state;
+
+ CVMX_USB_LOG_CALLED();
+ CVMX_USB_LOG_PARAM("%p", state);
+ CVMX_USB_LOG_PARAM("%d", reason);
+ CVMX_USB_LOG_PARAM("%p", callback);
+ CVMX_USB_LOG_PARAM("%p", user_data);
+ if (cvmx_unlikely(reason >= __CVMX_USB_CALLBACK_END))
+ CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
+ if (cvmx_unlikely(!callback))
+ CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
+
+ usb->callback[reason] = callback;
+ usb->callback_data[reason] = user_data;
+
+ CVMX_USB_RETURN(CVMX_USB_SUCCESS);
+}
+
+
+/**
+ * Get the current USB protocol level frame number. The frame
+ * number is always in the range of 0-0x7ff.
+ *
+ * @param state USB device state populated by
+ * cvmx_usb_initialize().
+ *
+ * @return USB frame number
+ */
+int cvmx_usb_get_frame_number(cvmx_usb_state_t *state)
+{
+ int frame_number;
+ cvmx_usb_internal_state_t *usb = (cvmx_usb_internal_state_t*)state;
+ cvmx_usbcx_hfnum_t usbc_hfnum;
+
+ CVMX_USB_LOG_CALLED();
+ CVMX_USB_LOG_PARAM("%p", state);
+
+ usbc_hfnum.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HFNUM(usb->index));
+ frame_number = usbc_hfnum.s.frnum;
+
+ CVMX_USB_RETURN(frame_number);
+}
+
+
+/**
+ * @INTERNAL
+ * Poll a channel for status
+ *
+ * @param usb USB device
+ * @param channel Channel to poll
+ *
+ * @return Zero on success
+ */
+static int __cvmx_usb_poll_channel(cvmx_usb_internal_state_t *usb, int channel)
+{
+ cvmx_usbcx_hcintx_t usbc_hcint;
+ cvmx_usbcx_hctsizx_t usbc_hctsiz;
+ cvmx_usbcx_hccharx_t usbc_hcchar;
+ cvmx_usb_pipe_t *pipe;
+ cvmx_usb_transaction_t *transaction;
+ int bytes_this_transfer;
+ int bytes_in_last_packet;
+ int packets_processed;
+ int buffer_space_left;
+ CVMX_USB_LOG_CALLED();
+ CVMX_USB_LOG_PARAM("%p", usb);
+ CVMX_USB_LOG_PARAM("%d", channel);
+
+ /* Read the interrupt status bits for the channel */
+ usbc_hcint.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HCINTX(channel, usb->index));
+
+ if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA)
+ {
+ usbc_hcchar.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HCCHARX(channel, usb->index));
+
+ if (usbc_hcchar.s.chena && usbc_hcchar.s.chdis)
+ {
+ /* There seems to be a bug in CN31XX which can cause interrupt
+ IN transfers to get stuck until we do a write of HCCHARX
+ without changing things */
+ __cvmx_usb_write_csr32(usb, CVMX_USBCX_HCCHARX(channel, usb->index), usbc_hcchar.u32);
+ CVMX_USB_RETURN(0);
+ }
+
+ /* In non DMA mode the channels don't halt themselves. We need to
+ manually disable channels that are left running */
+ if (!usbc_hcint.s.chhltd)
+ {
+ if (usbc_hcchar.s.chena)
+ {
+ cvmx_usbcx_hcintmskx_t hcintmsk;
+ /* Disable all interrupts except CHHLTD */
+ hcintmsk.u32 = 0;
+ hcintmsk.s.chhltdmsk = 1;
+ __cvmx_usb_write_csr32(usb, CVMX_USBCX_HCINTMSKX(channel, usb->index), hcintmsk.u32);
+ usbc_hcchar.s.chdis = 1;
+ __cvmx_usb_write_csr32(usb, CVMX_USBCX_HCCHARX(channel, usb->index), usbc_hcchar.u32);
+ CVMX_USB_RETURN(0);
+ }
+ else if (usbc_hcint.s.xfercompl)
+ {
+ /* Successful IN/OUT with transfer complete. Channel halt isn't needed */
+ }
+ else
+ {
+ cvmx_dprintf("USB%d: Channel %d interrupt without halt\n", usb->index, channel);
+ CVMX_USB_RETURN(0);
+ }
+ }
+ }
+ else
+ {
+ /* There is are no interrupts that we need to process when the channel is
+ still running */
+ if (!usbc_hcint.s.chhltd)
+ CVMX_USB_RETURN(0);
+ }
+
+ /* Disable the channel interrupts now that it is done */
+ __cvmx_usb_write_csr32(usb, CVMX_USBCX_HCINTMSKX(channel, usb->index), 0);
+ usb->idle_hardware_channels |= (1<<channel);
+
+ /* Make sure this channel is tied to a valid pipe */
+ pipe = usb->pipe_for_channel[channel];
+ CVMX_PREFETCH(pipe, 0);
+ CVMX_PREFETCH(pipe, 128);
+ if (!pipe)
+ CVMX_USB_RETURN(0);
+ transaction = pipe->head;
+ CVMX_PREFETCH0(transaction);
+
+ /* Disconnect this pipe from the HW channel. Later the schedule function will
+ figure out which pipe needs to go */
+ usb->pipe_for_channel[channel] = NULL;
+ pipe->flags &= ~__CVMX_USB_PIPE_FLAGS_SCHEDULED;
+
+ /* Read the channel config info so we can figure out how much data
+ transfered */
+ usbc_hcchar.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HCCHARX(channel, usb->index));
+ usbc_hctsiz.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HCTSIZX(channel, usb->index));
+
+ /* Calculating the number of bytes successfully transferred is dependent on
+ the transfer direction */
+ packets_processed = transaction->pktcnt - usbc_hctsiz.s.pktcnt;
+ if (usbc_hcchar.s.epdir)
+ {
+ /* IN transactions are easy. For every byte received the hardware
+ decrements xfersize. All we need to do is subtract the current
+ value of xfersize from its starting value and we know how many
+ bytes were written to the buffer */
+ bytes_this_transfer = transaction->xfersize - usbc_hctsiz.s.xfersize;
+ }
+ else
+ {
+ /* OUT transaction don't decrement xfersize. Instead pktcnt is
+ decremented on every successful packet send. The hardware does
+ this when it receives an ACK, or NYET. If it doesn't
+ receive one of these responses pktcnt doesn't change */
+ bytes_this_transfer = packets_processed * usbc_hcchar.s.mps;
+ /* The last packet may not be a full transfer if we didn't have
+ enough data */
+ if (bytes_this_transfer > transaction->xfersize)
+ bytes_this_transfer = transaction->xfersize;
+ }
+ /* Figure out how many bytes were in the last packet of the transfer */
+ if (packets_processed)
+ bytes_in_last_packet = bytes_this_transfer - (packets_processed-1) * usbc_hcchar.s.mps;
+ else
+ bytes_in_last_packet = bytes_this_transfer;
+
+ /* As a special case, setup transactions output the setup header, not
+ the user's data. For this reason we don't count setup data as bytes
+ transferred */
+ if ((transaction->stage == CVMX_USB_STAGE_SETUP) ||
+ (transaction->stage == CVMX_USB_STAGE_SETUP_SPLIT_COMPLETE))
+ bytes_this_transfer = 0;
+
+ /* Optional debug output */
+ if (cvmx_unlikely((usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_DEBUG_TRANSFERS) ||
+ (pipe->flags & CVMX_USB_PIPE_FLAGS_DEBUG_TRANSFERS)))
+ cvmx_dprintf("%s: Channel %d halted. Pipe %d transaction %d stage %d bytes=%d\n",
+ __FUNCTION__, channel,
+ __cvmx_usb_get_pipe_handle(usb, pipe),
+ __cvmx_usb_get_submit_handle(usb, transaction),
+ transaction->stage, bytes_this_transfer);
+
+ /* Add the bytes transferred to the running total. It is important that
+ bytes_this_transfer doesn't count any data that needs to be
+ retransmitted */
+ transaction->actual_bytes += bytes_this_transfer;
+ if (transaction->type == CVMX_USB_TRANSFER_ISOCHRONOUS)
+ buffer_space_left = transaction->iso_packets[0].length - transaction->actual_bytes;
+ else
+ buffer_space_left = transaction->buffer_length - transaction->actual_bytes;
+
+ /* We need to remember the PID toggle state for the next transaction. The
+ hardware already updated it for the next transaction */
+ pipe->pid_toggle = !(usbc_hctsiz.s.pid == 0);
+
+ /* For high speed bulk out, assume the next transaction will need to do a
+ ping before proceeding. If this isn't true the ACK processing below
+ will clear this flag */
+ if ((pipe->device_speed == CVMX_USB_SPEED_HIGH) &&
+ (pipe->transfer_type == CVMX_USB_TRANSFER_BULK) &&
+ (pipe->transfer_dir == CVMX_USB_DIRECTION_OUT))
+ pipe->flags |= __CVMX_USB_PIPE_FLAGS_NEED_PING;
+
+ if (usbc_hcint.s.stall)
+ {
+ /* STALL as a response means this transaction cannot be completed
+ because the device can't process transactions. Tell the user. Any
+ data that was transferred will be counted on the actual bytes
+ transferred */
+ pipe->pid_toggle = 0;
+ __cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_STALL);
+ }
+ else if (usbc_hcint.s.xacterr)
+ {
+ /* We know at least one packet worked if we get a ACK or NAK. Reset the retry counter */
+ if (usbc_hcint.s.nak || usbc_hcint.s.ack)
+ transaction->retries = 0;
+ transaction->retries++;
+ if (transaction->retries > MAX_RETRIES)
+ {
+ /* XactErr as a response means the device signaled something wrong with
+ the transfer. For example, PID toggle errors cause these */
+ __cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_XACTERR);
+ }
+ else
+ {
+ /* If this was a split then clear our split in progress marker */
+ if (usb->active_split == transaction)
+ usb->active_split = NULL;
+ /* Rewind to the beginning of the transaction by anding off the
+ split complete bit */
+ transaction->stage &= ~1;
+ pipe->split_sc_frame = -1;
+ pipe->next_tx_frame += pipe->interval;
+ if (pipe->next_tx_frame < usb->frame_number)
+ pipe->next_tx_frame = usb->frame_number + pipe->interval -
+ (usb->frame_number - pipe->next_tx_frame) % pipe->interval;
+ }
+ }
+ else if (usbc_hcint.s.bblerr)
+ {
+ /* Babble Error (BblErr) */
+ __cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_BABBLEERR);
+ }
+ else if (usbc_hcint.s.datatglerr)
+ {
+ /* We'll retry the exact same transaction again */
+ transaction->retries++;
+ }
+ else if (usbc_hcint.s.nyet)
+ {
+ /* NYET as a response is only allowed in three cases: as a response to
+ a ping, as a response to a split transaction, and as a response to
+ a bulk out. The ping case is handled by hardware, so we only have
+ splits and bulk out */
+ if (!__cvmx_usb_pipe_needs_split(usb, pipe))
+ {
+ transaction->retries = 0;
+ /* If there is more data to go then we need to try again. Otherwise
+ this transaction is complete */
+ if ((buffer_space_left == 0) || (bytes_in_last_packet < pipe->max_packet))
+ __cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_SUCCESS);
+ }
+ else
+ {
+ /* Split transactions retry the split complete 4 times then rewind
+ to the start split and do the entire transactions again */
+ transaction->retries++;
+ if ((transaction->retries & 0x3) == 0)
+ {
+ /* Rewind to the beginning of the transaction by anding off the
+ split complete bit */
+ transaction->stage &= ~1;
+ pipe->split_sc_frame = -1;
+ }
+ }
+ }
+ else if (usbc_hcint.s.ack)
+ {
+ transaction->retries = 0;
+ /* The ACK bit can only be checked after the other error bits. This is
+ because a multi packet transfer may succeed in a number of packets
+ and then get a different response on the last packet. In this case
+ both ACK and the last response bit will be set. If none of the
+ other response bits is set, then the last packet must have been an
+ ACK */
+
+ /* Since we got an ACK, we know we don't need to do a ping on this
+ pipe */
+ pipe->flags &= ~__CVMX_USB_PIPE_FLAGS_NEED_PING;
+
+ switch (transaction->type)
+ {
+ case CVMX_USB_TRANSFER_CONTROL:
+ switch (transaction->stage)
+ {
+ case CVMX_USB_STAGE_NON_CONTROL:
+ case CVMX_USB_STAGE_NON_CONTROL_SPLIT_COMPLETE:
+ /* This should be impossible */
+ __cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_ERROR);
+ break;
+ case CVMX_USB_STAGE_SETUP:
+ pipe->pid_toggle = 1;
+ if (__cvmx_usb_pipe_needs_split(usb, pipe))
+ transaction->stage = CVMX_USB_STAGE_SETUP_SPLIT_COMPLETE;
+ else
+ {
+ cvmx_usb_control_header_t *header = cvmx_phys_to_ptr(transaction->control_header);
+ if (header->s.length)
+ transaction->stage = CVMX_USB_STAGE_DATA;
+ else
+ transaction->stage = CVMX_USB_STAGE_STATUS;
+ }
+ break;
+ case CVMX_USB_STAGE_SETUP_SPLIT_COMPLETE:
+ {
+ cvmx_usb_control_header_t *header = cvmx_phys_to_ptr(transaction->control_header);
+ if (header->s.length)
+ transaction->stage = CVMX_USB_STAGE_DATA;
+ else
+ transaction->stage = CVMX_USB_STAGE_STATUS;
+ }
+ break;
+ case CVMX_USB_STAGE_DATA:
+ if (__cvmx_usb_pipe_needs_split(usb, pipe))
+ {
+ transaction->stage = CVMX_USB_STAGE_DATA_SPLIT_COMPLETE;
+ /* For setup OUT data that are splits, the hardware
+ doesn't appear to count transferred data. Here
+ we manually update the data transferred */
+ if (!usbc_hcchar.s.epdir)
+ {
+ if (buffer_space_left < pipe->max_packet)
+ transaction->actual_bytes += buffer_space_left;
+ else
+ transaction->actual_bytes += pipe->max_packet;
+ }
+ }
+ else if ((buffer_space_left == 0) || (bytes_in_last_packet < pipe->max_packet))
+ {
+ pipe->pid_toggle = 1;
+ transaction->stage = CVMX_USB_STAGE_STATUS;
+ }
+ break;
+ case CVMX_USB_STAGE_DATA_SPLIT_COMPLETE:
+ if ((buffer_space_left == 0) || (bytes_in_last_packet < pipe->max_packet))
+ {
+ pipe->pid_toggle = 1;
+ transaction->stage = CVMX_USB_STAGE_STATUS;
+ }
+ else
+ {
+ transaction->stage = CVMX_USB_STAGE_DATA;
+ }
+ break;
+ case CVMX_USB_STAGE_STATUS:
+ if (__cvmx_usb_pipe_needs_split(usb, pipe))
+ transaction->stage = CVMX_USB_STAGE_STATUS_SPLIT_COMPLETE;
+ else
+ __cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_SUCCESS);
+ break;
+ case CVMX_USB_STAGE_STATUS_SPLIT_COMPLETE:
+ __cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_SUCCESS);
+ break;
+ }
+ break;
+ case CVMX_USB_TRANSFER_BULK:
+ case CVMX_USB_TRANSFER_INTERRUPT:
+ /* The only time a bulk transfer isn't complete when
+ it finishes with an ACK is during a split transaction. For
+ splits we need to continue the transfer if more data is
+ needed */
+ if (__cvmx_usb_pipe_needs_split(usb, pipe))
+ {
+ if (transaction->stage == CVMX_USB_STAGE_NON_CONTROL)
+ transaction->stage = CVMX_USB_STAGE_NON_CONTROL_SPLIT_COMPLETE;
+ else
+ {
+ if (buffer_space_left && (bytes_in_last_packet == pipe->max_packet))
+ transaction->stage = CVMX_USB_STAGE_NON_CONTROL;
+ else
+ {
+ if (transaction->type == CVMX_USB_TRANSFER_INTERRUPT)
+ pipe->next_tx_frame += pipe->interval;
+ __cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_SUCCESS);
+ }
+ }
+ }
+ else
+ {
+ if ((pipe->device_speed == CVMX_USB_SPEED_HIGH) &&
+ (pipe->transfer_type == CVMX_USB_TRANSFER_BULK) &&
+ (pipe->transfer_dir == CVMX_USB_DIRECTION_OUT) &&
+ (usbc_hcint.s.nak))
+ pipe->flags |= __CVMX_USB_PIPE_FLAGS_NEED_PING;
+ if (!buffer_space_left || (bytes_in_last_packet < pipe->max_packet))
+ {
+ if (transaction->type == CVMX_USB_TRANSFER_INTERRUPT)
+ pipe->next_tx_frame += pipe->interval;
+ __cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_SUCCESS);
+ }
+ }
+ break;
+ case CVMX_USB_TRANSFER_ISOCHRONOUS:
+ if (__cvmx_usb_pipe_needs_split(usb, pipe))
+ {
+ /* ISOCHRONOUS OUT splits don't require a complete split stage.
+ Instead they use a sequence of begin OUT splits to transfer
+ the data 188 bytes at a time. Once the transfer is complete,
+ the pipe sleeps until the next schedule interval */
+ if (pipe->transfer_dir == CVMX_USB_DIRECTION_OUT)
+ {
+ /* If no space left or this wasn't a max size packet then
+ this transfer is complete. Otherwise start it again
+ to send the next 188 bytes */
+ if (!buffer_space_left || (bytes_this_transfer < 188))
+ {
+ pipe->next_tx_frame += pipe->interval;
+ __cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_SUCCESS);
+ }
+ }
+ else
+ {
+ if (transaction->stage == CVMX_USB_STAGE_NON_CONTROL_SPLIT_COMPLETE)
+ {
+ /* We are in the incoming data phase. Keep getting
+ data until we run out of space or get a small
+ packet */
+ if ((buffer_space_left == 0) || (bytes_in_last_packet < pipe->max_packet))
+ {
+ pipe->next_tx_frame += pipe->interval;
+ __cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_SUCCESS);
+ }
+ }
+ else
+ transaction->stage = CVMX_USB_STAGE_NON_CONTROL_SPLIT_COMPLETE;
+ }
+ }
+ else
+ {
+ pipe->next_tx_frame += pipe->interval;
+ __cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_SUCCESS);
+ }
+ break;
+ }
+ }
+ else if (usbc_hcint.s.nak)
+ {
+ /* If this was a split then clear our split in progress marker */
+ if (usb->active_split == transaction)
+ usb->active_split = NULL;
+ /* NAK as a response means the device couldn't accept the transaction,
+ but it should be retried in the future. Rewind to the beginning of
+ the transaction by anding off the split complete bit. Retry in the
+ next interval */
+ transaction->retries = 0;
+ transaction->stage &= ~1;
+ pipe->next_tx_frame += pipe->interval;
+ if (pipe->next_tx_frame < usb->frame_number)
+ pipe->next_tx_frame = usb->frame_number + pipe->interval -
+ (usb->frame_number - pipe->next_tx_frame) % pipe->interval;
+ }
+ else
+ {
+ cvmx_usb_port_status_t port;
+ port = cvmx_usb_get_status((cvmx_usb_state_t *)usb);
+ if (port.port_enabled)
+ {
+ /* We'll retry the exact same transaction again */
+ transaction->retries++;
+ }
+ else
+ {
+ /* We get channel halted interrupts with no result bits sets when the
+ cable is unplugged */
+ __cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_ERROR);
+ }
+ }
+ CVMX_USB_RETURN(0);
+}
+
+
+/**
+ * Poll the USB block for status and call all needed callback
+ * handlers. This function is meant to be called in the interrupt
+ * handler for the USB controller. It can also be called
+ * periodically in a loop for non-interrupt based operation.
+ *
+ * @param state USB device state populated by
+ * cvmx_usb_initialize().
+ *
+ * @return CVMX_USB_SUCCESS or a negative error code defined in
+ * cvmx_usb_status_t.
+ */
+cvmx_usb_status_t cvmx_usb_poll(cvmx_usb_state_t *state)
+{
+ cvmx_usbcx_hfnum_t usbc_hfnum;
+ cvmx_usbcx_gintsts_t usbc_gintsts;
+ cvmx_usb_internal_state_t *usb = (cvmx_usb_internal_state_t*)state;
+
+ CVMX_PREFETCH(usb, 0);
+ CVMX_PREFETCH(usb, 1*128);
+ CVMX_PREFETCH(usb, 2*128);
+ CVMX_PREFETCH(usb, 3*128);
+ CVMX_PREFETCH(usb, 4*128);
+
+ CVMX_USB_LOG_CALLED();
+ CVMX_USB_LOG_PARAM("%p", state);
+
+ /* Update the frame counter */
+ usbc_hfnum.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HFNUM(usb->index));
+ if ((usb->frame_number&0x3fff) > usbc_hfnum.s.frnum)
+ usb->frame_number += 0x4000;
+ usb->frame_number &= ~0x3fffull;
+ usb->frame_number |= usbc_hfnum.s.frnum;
+
+ /* Read the pending interrupts */
+ usbc_gintsts.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_GINTSTS(usb->index));
+
+ /* Clear the interrupts now that we know about them */
+ __cvmx_usb_write_csr32(usb, CVMX_USBCX_GINTSTS(usb->index), usbc_gintsts.u32);
+
+ if (usbc_gintsts.s.rxflvl)
+ {
+ /* RxFIFO Non-Empty (RxFLvl)
+ Indicates that there is at least one packet pending to be read
+ from the RxFIFO. */
+ /* In DMA mode this is handled by hardware */
+ if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA)
+ __cvmx_usb_poll_rx_fifo(usb);
+ }
+ if (usbc_gintsts.s.ptxfemp || usbc_gintsts.s.nptxfemp)
+ {
+ /* Fill the Tx FIFOs when not in DMA mode */
+ if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA)
+ __cvmx_usb_poll_tx_fifo(usb);
+ }
+ if (usbc_gintsts.s.disconnint || usbc_gintsts.s.prtint)
+ {
+ cvmx_usbcx_hprt_t usbc_hprt;
+ /* Disconnect Detected Interrupt (DisconnInt)
+ Asserted when a device disconnect is detected. */
+
+ /* Host Port Interrupt (PrtInt)
+ The core sets this bit to indicate a change in port status of one
+ of the O2P USB core ports in Host mode. The application must
+ read the Host Port Control and Status (HPRT) register to
+ determine the exact event that caused this interrupt. The
+ application must clear the appropriate status bit in the Host Port
+ Control and Status register to clear this bit. */
+
+ /* Call the user's port callback */
+ __cvmx_usb_perform_callback(usb, NULL, NULL,
+ CVMX_USB_CALLBACK_PORT_CHANGED,
+ CVMX_USB_COMPLETE_SUCCESS);
+ /* Clear the port change bits */
+ usbc_hprt.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HPRT(usb->index));
+ usbc_hprt.s.prtena = 0;
+ __cvmx_usb_write_csr32(usb, CVMX_USBCX_HPRT(usb->index), usbc_hprt.u32);
+ }
+ if (usbc_gintsts.s.hchint)
+ {
+ /* Host Channels Interrupt (HChInt)
+ The core sets this bit to indicate that an interrupt is pending on
+ one of the channels of the core (in Host mode). The application
+ must read the Host All Channels Interrupt (HAINT) register to
+ determine the exact number of the channel on which the
+ interrupt occurred, and then read the corresponding Host
+ Channel-n Interrupt (HCINTn) register to determine the exact
+ cause of the interrupt. The application must clear the
+ appropriate status bit in the HCINTn register to clear this bit. */
+ cvmx_usbcx_haint_t usbc_haint;
+ usbc_haint.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HAINT(usb->index));
+ while (usbc_haint.u32)
+ {
+ int channel;
+ CVMX_CLZ(channel, usbc_haint.u32);
+ channel = 31 - channel;
+ __cvmx_usb_poll_channel(usb, channel);
+ usbc_haint.u32 ^= 1<<channel;
+ }
+ }
+
+ __cvmx_usb_schedule(usb, usbc_gintsts.s.sof);
+
+ CVMX_USB_RETURN(CVMX_USB_SUCCESS);
+}
--- /dev/null
+/***********************license start***************
+ * Copyright (c) 2003-2010 Cavium Networks (support@cavium.com). All rights
+ * reserved.
+ *
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ *
+ * * Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials provided
+ * with the distribution.
+
+ * * Neither the name of Cavium Networks nor the names of
+ * its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written
+ * permission.
+
+ * This Software, including technical data, may be subject to U.S. export control
+ * laws, including the U.S. Export Administration Act and its associated
+ * regulations, and may be subject to export or import regulations in other
+ * countries.
+
+ * TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE SOFTWARE IS PROVIDED "AS IS"
+ * AND WITH ALL FAULTS AND CAVIUM NETWORKS MAKES NO PROMISES, REPRESENTATIONS OR
+ * WARRANTIES, EITHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, WITH RESPECT TO
+ * THE SOFTWARE, INCLUDING ITS CONDITION, ITS CONFORMITY TO ANY REPRESENTATION OR
+ * DESCRIPTION, OR THE EXISTENCE OF ANY LATENT OR PATENT DEFECTS, AND CAVIUM
+ * SPECIFICALLY DISCLAIMS ALL IMPLIED (IF ANY) WARRANTIES OF TITLE,
+ * MERCHANTABILITY, NONINFRINGEMENT, FITNESS FOR A PARTICULAR PURPOSE, LACK OF
+ * VIRUSES, ACCURACY OR COMPLETENESS, QUIET ENJOYMENT, QUIET POSSESSION OR
+ * CORRESPONDENCE TO DESCRIPTION. THE ENTIRE RISK ARISING OUT OF USE OR
+ * PERFORMANCE OF THE SOFTWARE LIES WITH YOU.
+ ***********************license end**************************************/
+
+
+/**
+ * @file
+ *
+ * "cvmx-usb.h" defines a set of low level USB functions to help
+ * developers create Octeon USB drivers for various operating
+ * systems. These functions provide a generic API to the Octeon
+ * USB blocks, hiding the internal hardware specific
+ * operations.
+ *
+ * At a high level the device driver needs to:
+ *
+ * -# Call cvmx_usb_get_num_ports() to get the number of
+ * supported ports.
+ * -# Call cvmx_usb_initialize() for each Octeon USB port.
+ * -# Enable the port using cvmx_usb_enable().
+ * -# Either periodically, or in an interrupt handler, call
+ * cvmx_usb_poll() to service USB events.
+ * -# Manage pipes using cvmx_usb_open_pipe() and
+ * cvmx_usb_close_pipe().
+ * -# Manage transfers using cvmx_usb_submit_*() and
+ * cvmx_usb_cancel*().
+ * -# Shutdown USB on unload using cvmx_usb_shutdown().
+ *
+ * To monitor USB status changes, the device driver must use
+ * cvmx_usb_register_callback() to register for events that it
+ * is interested in. Below are a few hints on successfully
+ * implementing a driver on top of this API.
+ *
+ * <h2>Initialization</h2>
+ *
+ * When a driver is first loaded, it is normally not necessary
+ * to bring up the USB port completely. Most operating systems
+ * expect to initialize and enable the port in two independent
+ * steps. Normally an operating system will probe hardware,
+ * initialize anything found, and then enable the hardware.
+ *
+ * In the probe phase you should:
+ * -# Use cvmx_usb_get_num_ports() to determine the number of
+ * USB port to be supported.
+ * -# Allocate space for a cvmx_usb_state_t structure for each
+ * port.
+ * -# Tell the operating system about each port
+ *
+ * In the initialization phase you should:
+ * -# Use cvmx_usb_initialize() on each port.
+ * -# Do not call cvmx_usb_enable(). This leaves the USB port in
+ * the disabled state until the operating system is ready.
+ *
+ * Finally, in the enable phase you should:
+ * -# Call cvmx_usb_enable() on the appropriate port.
+ * -# Note that some operating system use a RESET instead of an
+ * enable call. To implement RESET, you should call
+ * cvmx_usb_disable() followed by cvmx_usb_enable().
+ *
+ * <h2>Locking</h2>
+ *
+ * All of the functions in the cvmx-usb API assume exclusive
+ * access to the USB hardware and internal data structures. This
+ * means that the driver must provide locking as necessary.
+ *
+ * In the single CPU state it is normally enough to disable
+ * interrupts before every call to cvmx_usb*() and enable them
+ * again after the call is complete. Keep in mind that it is
+ * very common for the callback handlers to make additional
+ * calls into cvmx-usb, so the disable/enable must be protected
+ * against recursion. As an example, the Linux kernel
+ * local_irq_save() and local_irq_restore() are perfect for this
+ * in the non SMP case.
+ *
+ * In the SMP case, locking is more complicated. For SMP you not
+ * only need to disable interrupts on the local core, but also
+ * take a lock to make sure that another core cannot call
+ * cvmx-usb.
+ *
+ * <h2>Port callback</h2>
+ *
+ * The port callback prototype needs to look as follows:
+ *
+ * void port_callback(cvmx_usb_state_t *usb,
+ * cvmx_usb_callback_t reason,
+ * cvmx_usb_complete_t status,
+ * int pipe_handle,
+ * int submit_handle,
+ * int bytes_transferred,
+ * void *user_data);
+ * - @b usb is the cvmx_usb_state_t for the port.
+ * - @b reason will always be
+ * CVMX_USB_CALLBACK_PORT_CHANGED.
+ * - @b status will always be CVMX_USB_COMPLETE_SUCCESS.
+ * - @b pipe_handle will always be -1.
+ * - @b submit_handle will always be -1.
+ * - @b bytes_transferred will always be 0.
+ * - @b user_data is the void pointer originally passed along
+ * with the callback. Use this for any state information you
+ * need.
+ *
+ * The port callback will be called whenever the user plugs /
+ * unplugs a device from the port. It will not be called when a
+ * device is plugged / unplugged from a hub connected to the
+ * root port. Normally all the callback needs to do is tell the
+ * operating system to poll the root hub for status. Under
+ * Linux, this is performed by calling usb_hcd_poll_rh_status().
+ * In the Linux driver we use @b user_data. to pass around the
+ * Linux "hcd" structure. Once the port callback completes,
+ * Linux automatically calls octeon_usb_hub_status_data() which
+ * uses cvmx_usb_get_status() to determine the root port status.
+ *
+ * <h2>Complete callback</h2>
+ *
+ * The completion callback prototype needs to look as follows:
+ *
+ * void complete_callback(cvmx_usb_state_t *usb,
+ * cvmx_usb_callback_t reason,
+ * cvmx_usb_complete_t status,
+ * int pipe_handle,
+ * int submit_handle,
+ * int bytes_transferred,
+ * void *user_data);
+ * - @b usb is the cvmx_usb_state_t for the port.
+ * - @b reason will always be
+ * CVMX_USB_CALLBACK_TRANSFER_COMPLETE.
+ * - @b status will be one of the cvmx_usb_complete_t
+ * enumerations.
+ * - @b pipe_handle is the handle to the pipe the transaction
+ * was originally submitted on.
+ * - @b submit_handle is the handle returned by the original
+ * cvmx_usb_submit_* call.
+ * - @b bytes_transferred is the number of bytes successfully
+ * transferred in the transaction. This will be zero on most
+ * error conditions.
+ * - @b user_data is the void pointer originally passed along
+ * with the callback. Use this for any state information you
+ * need. For example, the Linux "urb" is stored in here in the
+ * Linux driver.
+ *
+ * In general your callback handler should use @b status and @b
+ * bytes_transferred to tell the operating system the how the
+ * transaction completed. Normally the pipe is not changed in
+ * this callback.
+ *
+ * <h2>Canceling transactions</h2>
+ *
+ * When a transaction is cancelled using cvmx_usb_cancel*(), the
+ * actual length of time until the complete callback is called
+ * can vary greatly. It may be called before cvmx_usb_cancel*()
+ * returns, or it may be called a number of usb frames in the
+ * future once the hardware frees the transaction. In either of
+ * these cases, the complete handler will receive
+ * CVMX_USB_COMPLETE_CANCEL.
+ *
+ * <h2>Handling pipes</h2>
+ *
+ * USB "pipes" is a software construct created by this API to
+ * enable the ordering of usb transactions to a device endpoint.
+ * Octeon's underlying hardware doesn't have any concept
+ * equivalent to "pipes". The hardware instead has eight
+ * channels that can be used simultaneously to have up to eight
+ * transaction in process at the same time. In order to maintain
+ * ordering in a pipe, the transactions for a pipe will only be
+ * active in one hardware channel at a time. From an API user's
+ * perspective, this doesn't matter but it can be helpful to
+ * keep this in mind when you are probing hardware while
+ * debugging.
+ *
+ * Also keep in mind that usb transactions contain state
+ * information about the previous transaction to the same
+ * endpoint. Each transaction has a PID toggle that changes 0/1
+ * between each sub packet. This is maintained in the pipe data
+ * structures. For this reason, you generally cannot create and
+ * destroy a pipe for every transaction. A sequence of
+ * transaction to the same endpoint must use the same pipe.
+ *
+ * <h2>Root Hub</h2>
+ *
+ * Some operating systems view the usb root port as a normal usb
+ * hub. These systems attempt to control the root hub with
+ * messages similar to the usb 2.0 spec for hub control and
+ * status. For these systems it may be necessary to write
+ * function to decode standard usb control messages into
+ * equivalent cvmx-usb API calls. As an example, the following
+ * code is used under Linux for some of the basic hub control
+ * messages.
+ *
+ * @code
+ * static int octeon_usb_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, u16 wIndex, char *buf, u16 wLength)
+ * {
+ * cvmx_usb_state_t *usb = (cvmx_usb_state_t *)hcd->hcd_priv;
+ * cvmx_usb_port_status_t usb_port_status;
+ * int port_status;
+ * struct usb_hub_descriptor *desc;
+ * unsigned long flags;
+ *
+ * switch (typeReq)
+ * {
+ * case ClearHubFeature:
+ * DEBUG_ROOT_HUB("OcteonUSB: ClearHubFeature\n");
+ * switch (wValue)
+ * {
+ * case C_HUB_LOCAL_POWER:
+ * case C_HUB_OVER_CURRENT:
+ * // Nothing required here
+ * break;
+ * default:
+ * return -EINVAL;
+ * }
+ * break;
+ * case ClearPortFeature:
+ * DEBUG_ROOT_HUB("OcteonUSB: ClearPortFeature");
+ * if (wIndex != 1)
+ * {
+ * DEBUG_ROOT_HUB(" INVALID\n");
+ * return -EINVAL;
+ * }
+ *
+ * switch (wValue)
+ * {
+ * case USB_PORT_FEAT_ENABLE:
+ * DEBUG_ROOT_HUB(" ENABLE");
+ * local_irq_save(flags);
+ * cvmx_usb_disable(usb);
+ * local_irq_restore(flags);
+ * break;
+ * case USB_PORT_FEAT_SUSPEND:
+ * DEBUG_ROOT_HUB(" SUSPEND");
+ * // Not supported on Octeon
+ * break;
+ * case USB_PORT_FEAT_POWER:
+ * DEBUG_ROOT_HUB(" POWER");
+ * // Not supported on Octeon
+ * break;
+ * case USB_PORT_FEAT_INDICATOR:
+ * DEBUG_ROOT_HUB(" INDICATOR");
+ * // Port inidicator not supported
+ * break;
+ * case USB_PORT_FEAT_C_CONNECTION:
+ * DEBUG_ROOT_HUB(" C_CONNECTION");
+ * // Clears drivers internal connect status change flag
+ * cvmx_usb_set_status(usb, cvmx_usb_get_status(usb));
+ * break;
+ * case USB_PORT_FEAT_C_RESET:
+ * DEBUG_ROOT_HUB(" C_RESET");
+ * // Clears the driver's internal Port Reset Change flag
+ * cvmx_usb_set_status(usb, cvmx_usb_get_status(usb));
+ * break;
+ * case USB_PORT_FEAT_C_ENABLE:
+ * DEBUG_ROOT_HUB(" C_ENABLE");
+ * // Clears the driver's internal Port Enable/Disable Change flag
+ * cvmx_usb_set_status(usb, cvmx_usb_get_status(usb));
+ * break;
+ * case USB_PORT_FEAT_C_SUSPEND:
+ * DEBUG_ROOT_HUB(" C_SUSPEND");
+ * // Clears the driver's internal Port Suspend Change flag,
+ * which is set when resume signaling on the host port is
+ * complete
+ * break;
+ * case USB_PORT_FEAT_C_OVER_CURRENT:
+ * DEBUG_ROOT_HUB(" C_OVER_CURRENT");
+ * // Clears the driver's overcurrent Change flag
+ * cvmx_usb_set_status(usb, cvmx_usb_get_status(usb));
+ * break;
+ * default:
+ * DEBUG_ROOT_HUB(" UNKNOWN\n");
+ * return -EINVAL;
+ * }
+ * DEBUG_ROOT_HUB("\n");
+ * break;
+ * case GetHubDescriptor:
+ * DEBUG_ROOT_HUB("OcteonUSB: GetHubDescriptor\n");
+ * desc = (struct usb_hub_descriptor *)buf;
+ * desc->bDescLength = 9;
+ * desc->bDescriptorType = 0x29;
+ * desc->bNbrPorts = 1;
+ * desc->wHubCharacteristics = 0x08;
+ * desc->bPwrOn2PwrGood = 1;
+ * desc->bHubContrCurrent = 0;
+ * desc->bitmap[0] = 0;
+ * desc->bitmap[1] = 0xff;
+ * break;
+ * case GetHubStatus:
+ * DEBUG_ROOT_HUB("OcteonUSB: GetHubStatus\n");
+ * *(__le32 *)buf = 0;
+ * break;
+ * case GetPortStatus:
+ * DEBUG_ROOT_HUB("OcteonUSB: GetPortStatus");
+ * if (wIndex != 1)
+ * {
+ * DEBUG_ROOT_HUB(" INVALID\n");
+ * return -EINVAL;
+ * }
+ *
+ * usb_port_status = cvmx_usb_get_status(usb);
+ * port_status = 0;
+ *
+ * if (usb_port_status.connect_change)
+ * {
+ * port_status |= (1 << USB_PORT_FEAT_C_CONNECTION);
+ * DEBUG_ROOT_HUB(" C_CONNECTION");
+ * }
+ *
+ * if (usb_port_status.port_enabled)
+ * {
+ * port_status |= (1 << USB_PORT_FEAT_C_ENABLE);
+ * DEBUG_ROOT_HUB(" C_ENABLE");
+ * }
+ *
+ * if (usb_port_status.connected)
+ * {
+ * port_status |= (1 << USB_PORT_FEAT_CONNECTION);
+ * DEBUG_ROOT_HUB(" CONNECTION");
+ * }
+ *
+ * if (usb_port_status.port_enabled)
+ * {
+ * port_status |= (1 << USB_PORT_FEAT_ENABLE);
+ * DEBUG_ROOT_HUB(" ENABLE");
+ * }
+ *
+ * if (usb_port_status.port_over_current)
+ * {
+ * port_status |= (1 << USB_PORT_FEAT_OVER_CURRENT);
+ * DEBUG_ROOT_HUB(" OVER_CURRENT");
+ * }
+ *
+ * if (usb_port_status.port_powered)
+ * {
+ * port_status |= (1 << USB_PORT_FEAT_POWER);
+ * DEBUG_ROOT_HUB(" POWER");
+ * }
+ *
+ * if (usb_port_status.port_speed == CVMX_USB_SPEED_HIGH)
+ * {
+ * port_status |= (1 << USB_PORT_FEAT_HIGHSPEED);
+ * DEBUG_ROOT_HUB(" HIGHSPEED");
+ * }
+ * else if (usb_port_status.port_speed == CVMX_USB_SPEED_LOW)
+ * {
+ * port_status |= (1 << USB_PORT_FEAT_LOWSPEED);
+ * DEBUG_ROOT_HUB(" LOWSPEED");
+ * }
+ *
+ * *((__le32 *)buf) = cpu_to_le32(port_status);
+ * DEBUG_ROOT_HUB("\n");
+ * break;
+ * case SetHubFeature:
+ * DEBUG_ROOT_HUB("OcteonUSB: SetHubFeature\n");
+ * // No HUB features supported
+ * break;
+ * case SetPortFeature:
+ * DEBUG_ROOT_HUB("OcteonUSB: SetPortFeature");
+ * if (wIndex != 1)
+ * {
+ * DEBUG_ROOT_HUB(" INVALID\n");
+ * return -EINVAL;
+ * }
+ *
+ * switch (wValue)
+ * {
+ * case USB_PORT_FEAT_SUSPEND:
+ * DEBUG_ROOT_HUB(" SUSPEND\n");
+ * return -EINVAL;
+ * case USB_PORT_FEAT_POWER:
+ * DEBUG_ROOT_HUB(" POWER\n");
+ * return -EINVAL;
+ * case USB_PORT_FEAT_RESET:
+ * DEBUG_ROOT_HUB(" RESET\n");
+ * local_irq_save(flags);
+ * cvmx_usb_disable(usb);
+ * if (cvmx_usb_enable(usb))
+ * DEBUG_ERROR("Failed to enable the port\n");
+ * local_irq_restore(flags);
+ * return 0;
+ * case USB_PORT_FEAT_INDICATOR:
+ * DEBUG_ROOT_HUB(" INDICATOR\n");
+ * // Not supported
+ * break;
+ * default:
+ * DEBUG_ROOT_HUB(" UNKNOWN\n");
+ * return -EINVAL;
+ * }
+ * break;
+ * default:
+ * DEBUG_ROOT_HUB("OcteonUSB: Unknown root hub request\n");
+ * return -EINVAL;
+ * }
+ * return 0;
+ * }
+ * @endcode
+ *
+ * <h2>Interrupts</h2>
+ *
+ * If you plan on using usb interrupts, cvmx_usb_poll() must be
+ * called on every usb interrupt. It will read the usb state,
+ * call any needed callbacks, and schedule transactions as
+ * needed. Your device driver needs only to hookup an interrupt
+ * handler and call cvmx_usb_poll(). Octeon's usb port 0 causes
+ * CIU bit CIU_INT*_SUM0[USB] to be set (bit 56). For port 1,
+ * CIU bit CIU_INT_SUM1[USB1] is set (bit 17). How these bits
+ * are turned into interrupt numbers is operating system
+ * specific. For Linux, there are the convenient defines
+ * OCTEON_IRQ_USB0 and OCTEON_IRQ_USB1 for the IRQ numbers.
+ *
+ * If you aren't using interrupts, simple call cvmx_usb_poll()
+ * in your main processing loop.
+ *
+ * <hr>$Revision: 32636 $<hr>
+ */
+
+#ifndef __CVMX_USB_H__
+#define __CVMX_USB_H__
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * Enumerations representing the status of function calls.
+ */
+typedef enum
+{
+ CVMX_USB_SUCCESS = 0, /**< There were no errors */
+ CVMX_USB_INVALID_PARAM = -1, /**< A parameter to the function was invalid */
+ CVMX_USB_NO_MEMORY = -2, /**< Insufficient resources were available for the request */
+ CVMX_USB_BUSY = -3, /**< The resource is busy and cannot service the request */
+ CVMX_USB_TIMEOUT = -4, /**< Waiting for an action timed out */
+ CVMX_USB_INCORRECT_MODE = -5, /**< The function call doesn't work in the current USB
+ mode. This happens when host only functions are
+ called in device mode or vice versa */
+} cvmx_usb_status_t;
+
+/**
+ * Enumerations representing the possible USB device speeds
+ */
+typedef enum
+{
+ CVMX_USB_SPEED_HIGH = 0, /**< Device is operation at 480Mbps */
+ CVMX_USB_SPEED_FULL = 1, /**< Device is operation at 12Mbps */
+ CVMX_USB_SPEED_LOW = 2, /**< Device is operation at 1.5Mbps */
+} cvmx_usb_speed_t;
+
+/**
+ * Enumeration representing the possible USB transfer types.
+ */
+typedef enum
+{
+ CVMX_USB_TRANSFER_CONTROL = 0, /**< USB transfer type control for hub and status transfers */
+ CVMX_USB_TRANSFER_ISOCHRONOUS = 1, /**< USB transfer type isochronous for low priority periodic transfers */
+ CVMX_USB_TRANSFER_BULK = 2, /**< USB transfer type bulk for large low priority transfers */
+ CVMX_USB_TRANSFER_INTERRUPT = 3, /**< USB transfer type interrupt for high priority periodic transfers */
+} cvmx_usb_transfer_t;
+
+/**
+ * Enumeration of the transfer directions
+ */
+typedef enum
+{
+ CVMX_USB_DIRECTION_OUT, /**< Data is transferring from Octeon to the device/host */
+ CVMX_USB_DIRECTION_IN, /**< Data is transferring from the device/host to Octeon */
+} cvmx_usb_direction_t;
+
+/**
+ * Enumeration of all possible status codes passed to callback
+ * functions.
+ */
+typedef enum
+{
+ CVMX_USB_COMPLETE_SUCCESS, /**< The transaction / operation finished without any errors */
+ CVMX_USB_COMPLETE_SHORT, /**< FIXME: This is currently not implemented */
+ CVMX_USB_COMPLETE_CANCEL, /**< The transaction was canceled while in flight by a user call to cvmx_usb_cancel* */
+ CVMX_USB_COMPLETE_ERROR, /**< The transaction aborted with an unexpected error status */
+ CVMX_USB_COMPLETE_STALL, /**< The transaction received a USB STALL response from the device */
+ CVMX_USB_COMPLETE_XACTERR, /**< The transaction failed with an error from the device even after a number of retries */
+ CVMX_USB_COMPLETE_DATATGLERR, /**< The transaction failed with a data toggle error even after a number of retries */
+ CVMX_USB_COMPLETE_BABBLEERR, /**< The transaction failed with a babble error */
+ CVMX_USB_COMPLETE_FRAMEERR, /**< The transaction failed with a frame error even after a number of retries */
+} cvmx_usb_complete_t;
+
+/**
+ * Structure returned containing the USB port status information.
+ */
+typedef struct
+{
+ uint32_t reserved : 25;
+ uint32_t port_enabled : 1; /**< 1 = Usb port is enabled, 0 = disabled */
+ uint32_t port_over_current : 1; /**< 1 = Over current detected, 0 = Over current not detected. Octeon doesn't support over current detection */
+ uint32_t port_powered : 1; /**< 1 = Port power is being supplied to the device, 0 = power is off. Octeon doesn't support turning port power off */
+ cvmx_usb_speed_t port_speed : 2; /**< Current port speed */
+ uint32_t connected : 1; /**< 1 = A device is connected to the port, 0 = No device is connected */
+ uint32_t connect_change : 1; /**< 1 = Device connected state changed since the last set status call */
+} cvmx_usb_port_status_t;
+
+/**
+ * This is the structure of a Control packet header
+ */
+typedef union
+{
+ uint64_t u64;
+ struct
+ {
+ uint64_t request_type : 8; /**< Bit 7 tells the direction: 1=IN, 0=OUT */
+ uint64_t request : 8; /**< The standard usb request to make */
+ uint64_t value : 16; /**< Value parameter for the request in little endian format */
+ uint64_t index : 16; /**< Index for the request in little endian format */
+ uint64_t length : 16; /**< Length of the data associated with this request in little endian format */
+ } s;
+} cvmx_usb_control_header_t;
+
+/**
+ * Descriptor for Isochronous packets
+ */
+typedef struct
+{
+ int offset; /**< This is the offset in bytes into the main buffer where this data is stored */
+ int length; /**< This is the length in bytes of the data */
+ cvmx_usb_complete_t status; /**< This is the status of this individual packet transfer */
+} cvmx_usb_iso_packet_t;
+
+/**
+ * Possible callback reasons for the USB API.
+ */
+typedef enum
+{
+ CVMX_USB_CALLBACK_TRANSFER_COMPLETE,
+ /**< A callback of this type is called when a submitted transfer
+ completes. The completion callback will be called even if the
+ transfer fails or is canceled. The status parameter will
+ contain details of why he callback was called. */
+ CVMX_USB_CALLBACK_PORT_CHANGED, /**< The status of the port changed. For example, someone may have
+ plugged a device in. The status parameter contains
+ CVMX_USB_COMPLETE_SUCCESS. Use cvmx_usb_get_status() to get
+ the new port status. */
+ __CVMX_USB_CALLBACK_END /**< Do not use. Used internally for array bounds */
+} cvmx_usb_callback_t;
+
+/**
+ * USB state internal data. The contents of this structure
+ * may change in future SDKs. No data in it should be referenced
+ * by user's of this API.
+ */
+typedef struct
+{
+ char data[65536];
+} cvmx_usb_state_t;
+
+/**
+ * USB callback functions are always of the following type.
+ * The parameters are as follows:
+ * - state = USB device state populated by
+ * cvmx_usb_initialize().
+ * - reason = The cvmx_usb_callback_t used to register
+ * the callback.
+ * - status = The cvmx_usb_complete_t representing the
+ * status code of a transaction.
+ * - pipe_handle = The Pipe that caused this callback, or
+ * -1 if this callback wasn't associated with a pipe.
+ * - submit_handle = Transfer submit handle causing this
+ * callback, or -1 if this callback wasn't associated
+ * with a transfer.
+ * - Actual number of bytes transfer.
+ * - user_data = The user pointer supplied to the
+ * function cvmx_usb_submit() or
+ * cvmx_usb_register_callback() */
+typedef void (*cvmx_usb_callback_func_t)(cvmx_usb_state_t *state,
+ cvmx_usb_callback_t reason,
+ cvmx_usb_complete_t status,
+ int pipe_handle, int submit_handle,
+ int bytes_transferred, void *user_data);
+
+/**
+ * Flags to pass the initialization function.
+ */
+typedef enum
+{
+ CVMX_USB_INITIALIZE_FLAGS_CLOCK_XO_XI = 1<<0, /**< The USB port uses a 12MHz crystal as clock source
+ at USB_XO and USB_XI. */
+ CVMX_USB_INITIALIZE_FLAGS_CLOCK_XO_GND = 1<<1, /**< The USB port uses 12/24/48MHz 2.5V board clock
+ source at USB_XO. USB_XI should be tied to GND.*/
+ CVMX_USB_INITIALIZE_FLAGS_CLOCK_AUTO = 0, /**< Automatically determine clock type based on function
+ in cvmx-helper-board.c. */
+ CVMX_USB_INITIALIZE_FLAGS_CLOCK_MHZ_MASK = 3<<3, /**< Mask for clock speed field */
+ CVMX_USB_INITIALIZE_FLAGS_CLOCK_12MHZ = 1<<3, /**< Speed of reference clock or crystal */
+ CVMX_USB_INITIALIZE_FLAGS_CLOCK_24MHZ = 2<<3, /**< Speed of reference clock */
+ CVMX_USB_INITIALIZE_FLAGS_CLOCK_48MHZ = 3<<3, /**< Speed of reference clock */
+ /* Bits 3-4 used to encode the clock frequency */
+ CVMX_USB_INITIALIZE_FLAGS_NO_DMA = 1<<5, /**< Disable DMA and used polled IO for data transfer use for the USB */
+ CVMX_USB_INITIALIZE_FLAGS_DEBUG_TRANSFERS = 1<<16, /**< Enable extra console output for debugging USB transfers */
+ CVMX_USB_INITIALIZE_FLAGS_DEBUG_CALLBACKS = 1<<17, /**< Enable extra console output for debugging USB callbacks */
+ CVMX_USB_INITIALIZE_FLAGS_DEBUG_INFO = 1<<18, /**< Enable extra console output for USB informational data */
+ CVMX_USB_INITIALIZE_FLAGS_DEBUG_CALLS = 1<<19, /**< Enable extra console output for every function call */
+ CVMX_USB_INITIALIZE_FLAGS_DEBUG_CSRS = 1<<20, /**< Enable extra console output for every CSR access */
+ CVMX_USB_INITIALIZE_FLAGS_DEBUG_ALL = ((CVMX_USB_INITIALIZE_FLAGS_DEBUG_CSRS<<1)-1) - (CVMX_USB_INITIALIZE_FLAGS_DEBUG_TRANSFERS-1),
+} cvmx_usb_initialize_flags_t;
+
+/**
+ * Flags for passing when a pipe is created. Currently no flags
+ * need to be passed.
+ */
+typedef enum
+{
+ CVMX_USB_PIPE_FLAGS_DEBUG_TRANSFERS = 1<<15,/**< Used to display CVMX_USB_INITIALIZE_FLAGS_DEBUG_TRANSFERS for a specific pipe only */
+ __CVMX_USB_PIPE_FLAGS_OPEN = 1<<16, /**< Used internally to determine if a pipe is open. Do not use */
+ __CVMX_USB_PIPE_FLAGS_SCHEDULED = 1<<17, /**< Used internally to determine if a pipe is actively using hardware. Do not use */
+ __CVMX_USB_PIPE_FLAGS_NEED_PING = 1<<18, /**< Used internally to determine if a high speed pipe is in the ping state. Do not use */
+} cvmx_usb_pipe_flags_t;
+
+/**
+ * Return the number of USB ports supported by this Octeon
+ * chip. If the chip doesn't support USB, or is not supported
+ * by this API, a zero will be returned. Most Octeon chips
+ * support one usb port, but some support two ports.
+ * cvmx_usb_initialize() must be called on independent
+ * cvmx_usb_state_t structures.
+ *
+ * @return Number of port, zero if usb isn't supported
+ */
+extern int cvmx_usb_get_num_ports(void);
+
+/**
+ * Initialize a USB port for use. This must be called before any
+ * other access to the Octeon USB port is made. The port starts
+ * off in the disabled state.
+ *
+ * @param state Pointer to an empty cvmx_usb_state_t structure
+ * that will be populated by the initialize call.
+ * This structure is then passed to all other USB
+ * functions.
+ * @param usb_port_number
+ * Which Octeon USB port to initialize.
+ * @param flags Flags to control hardware initialization. See
+ * cvmx_usb_initialize_flags_t for the flag
+ * definitions. Some flags are mandatory.
+ *
+ * @return CVMX_USB_SUCCESS or a negative error code defined in
+ * cvmx_usb_status_t.
+ */
+extern cvmx_usb_status_t cvmx_usb_initialize(cvmx_usb_state_t *state,
+ int usb_port_number,
+ cvmx_usb_initialize_flags_t flags);
+
+/**
+ * Shutdown a USB port after a call to cvmx_usb_initialize().
+ * The port should be disabled with all pipes closed when this
+ * function is called.
+ *
+ * @param state USB device state populated by
+ * cvmx_usb_initialize().
+ *
+ * @return CVMX_USB_SUCCESS or a negative error code defined in
+ * cvmx_usb_status_t.
+ */
+extern cvmx_usb_status_t cvmx_usb_shutdown(cvmx_usb_state_t *state);
+
+/**
+ * Enable a USB port. After this call succeeds, the USB port is
+ * online and servicing requests.
+ *
+ * @param state USB device state populated by
+ * cvmx_usb_initialize().
+ *
+ * @return CVMX_USB_SUCCESS or a negative error code defined in
+ * cvmx_usb_status_t.
+ */
+extern cvmx_usb_status_t cvmx_usb_enable(cvmx_usb_state_t *state);
+
+/**
+ * Disable a USB port. After this call the USB port will not
+ * generate data transfers and will not generate events.
+ * Transactions in process will fail and call their
+ * associated callbacks.
+ *
+ * @param state USB device state populated by
+ * cvmx_usb_initialize().
+ *
+ * @return CVMX_USB_SUCCESS or a negative error code defined in
+ * cvmx_usb_status_t.
+ */
+extern cvmx_usb_status_t cvmx_usb_disable(cvmx_usb_state_t *state);
+
+/**
+ * Get the current state of the USB port. Use this call to
+ * determine if the usb port has anything connected, is enabled,
+ * or has some sort of error condition. The return value of this
+ * call has "changed" bits to signal of the value of some fields
+ * have changed between calls. These "changed" fields are based
+ * on the last call to cvmx_usb_set_status(). In order to clear
+ * them, you must update the status through cvmx_usb_set_status().
+ *
+ * @param state USB device state populated by
+ * cvmx_usb_initialize().
+ *
+ * @return Port status information
+ */
+extern cvmx_usb_port_status_t cvmx_usb_get_status(cvmx_usb_state_t *state);
+
+/**
+ * Set the current state of the USB port. The status is used as
+ * a reference for the "changed" bits returned by
+ * cvmx_usb_get_status(). Other than serving as a reference, the
+ * status passed to this function is not used. No fields can be
+ * changed through this call.
+ *
+ * @param state USB device state populated by
+ * cvmx_usb_initialize().
+ * @param port_status
+ * Port status to set, most like returned by cvmx_usb_get_status()
+ */
+extern void cvmx_usb_set_status(cvmx_usb_state_t *state, cvmx_usb_port_status_t port_status);
+
+/**
+ * Open a virtual pipe between the host and a USB device. A pipe
+ * must be opened before data can be transferred between a device
+ * and Octeon.
+ *
+ * @param state USB device state populated by
+ * cvmx_usb_initialize().
+ * @param flags Optional pipe flags defined in
+ * cvmx_usb_pipe_flags_t.
+ * @param device_addr
+ * USB device address to open the pipe to
+ * (0-127).
+ * @param endpoint_num
+ * USB endpoint number to open the pipe to
+ * (0-15).
+ * @param device_speed
+ * The speed of the device the pipe is going
+ * to. This must match the device's speed,
+ * which may be different than the port speed.
+ * @param max_packet The maximum packet length the device can
+ * transmit/receive (low speed=0-8, full
+ * speed=0-1023, high speed=0-1024). This value
+ * comes from the standard endpoint descriptor
+ * field wMaxPacketSize bits <10:0>.
+ * @param transfer_type
+ * The type of transfer this pipe is for.
+ * @param transfer_dir
+ * The direction the pipe is in. This is not
+ * used for control pipes.
+ * @param interval For ISOCHRONOUS and INTERRUPT transfers,
+ * this is how often the transfer is scheduled
+ * for. All other transfers should specify
+ * zero. The units are in frames (8000/sec at
+ * high speed, 1000/sec for full speed).
+ * @param multi_count
+ * For high speed devices, this is the maximum
+ * allowed number of packet per microframe.
+ * Specify zero for non high speed devices. This
+ * value comes from the standard endpoint descriptor
+ * field wMaxPacketSize bits <12:11>.
+ * @param hub_device_addr
+ * Hub device address this device is connected
+ * to. Devices connected directly to Octeon
+ * use zero. This is only used when the device
+ * is full/low speed behind a high speed hub.
+ * The address will be of the high speed hub,
+ * not and full speed hubs after it.
+ * @param hub_port Which port on the hub the device is
+ * connected. Use zero for devices connected
+ * directly to Octeon. Like hub_device_addr,
+ * this is only used for full/low speed
+ * devices behind a high speed hub.
+ *
+ * @return A non negative value is a pipe handle. Negative
+ * values are failure codes from cvmx_usb_status_t.
+ */
+extern int cvmx_usb_open_pipe(cvmx_usb_state_t *state,
+ cvmx_usb_pipe_flags_t flags,
+ int device_addr, int endpoint_num,
+ cvmx_usb_speed_t device_speed, int max_packet,
+ cvmx_usb_transfer_t transfer_type,
+ cvmx_usb_direction_t transfer_dir, int interval,
+ int multi_count, int hub_device_addr,
+ int hub_port);
+
+/**
+ * Call to submit a USB Bulk transfer to a pipe.
+ *
+ * @param state USB device state populated by
+ * cvmx_usb_initialize().
+ * @param pipe_handle
+ * Handle to the pipe for the transfer.
+ * @param buffer Physical address of the data buffer in
+ * memory. Note that this is NOT A POINTER, but
+ * the full 64bit physical address of the
+ * buffer. This may be zero if buffer_length is
+ * zero.
+ * @param buffer_length
+ * Length of buffer in bytes.
+ * @param callback Function to call when this transaction
+ * completes. If the return value of this
+ * function isn't an error, then this function
+ * is guaranteed to be called when the
+ * transaction completes. If this parameter is
+ * NULL, then the generic callback registered
+ * through cvmx_usb_register_callback is
+ * called. If both are NULL, then there is no
+ * way to know when a transaction completes.
+ * @param user_data User supplied data returned when the
+ * callback is called. This is only used if
+ * callback in not NULL.
+ *
+ * @return A submitted transaction handle or negative on
+ * failure. Negative values are failure codes from
+ * cvmx_usb_status_t.
+ */
+extern int cvmx_usb_submit_bulk(cvmx_usb_state_t *state, int pipe_handle,
+ uint64_t buffer, int buffer_length,
+ cvmx_usb_callback_func_t callback,
+ void *user_data);
+
+/**
+ * Call to submit a USB Interrupt transfer to a pipe.
+ *
+ * @param state USB device state populated by
+ * cvmx_usb_initialize().
+ * @param pipe_handle
+ * Handle to the pipe for the transfer.
+ * @param buffer Physical address of the data buffer in
+ * memory. Note that this is NOT A POINTER, but
+ * the full 64bit physical address of the
+ * buffer. This may be zero if buffer_length is
+ * zero.
+ * @param buffer_length
+ * Length of buffer in bytes.
+ * @param callback Function to call when this transaction
+ * completes. If the return value of this
+ * function isn't an error, then this function
+ * is guaranteed to be called when the
+ * transaction completes. If this parameter is
+ * NULL, then the generic callback registered
+ * through cvmx_usb_register_callback is
+ * called. If both are NULL, then there is no
+ * way to know when a transaction completes.
+ * @param user_data User supplied data returned when the
+ * callback is called. This is only used if
+ * callback in not NULL.
+ *
+ * @return A submitted transaction handle or negative on
+ * failure. Negative values are failure codes from
+ * cvmx_usb_status_t.
+ */
+extern int cvmx_usb_submit_interrupt(cvmx_usb_state_t *state, int pipe_handle,
+ uint64_t buffer, int buffer_length,
+ cvmx_usb_callback_func_t callback,
+ void *user_data);
+
+/**
+ * Call to submit a USB Control transfer to a pipe.
+ *
+ * @param state USB device state populated by
+ * cvmx_usb_initialize().
+ * @param pipe_handle
+ * Handle to the pipe for the transfer.
+ * @param control_header
+ * USB 8 byte control header physical address.
+ * Note that this is NOT A POINTER, but the
+ * full 64bit physical address of the buffer.
+ * @param buffer Physical address of the data buffer in
+ * memory. Note that this is NOT A POINTER, but
+ * the full 64bit physical address of the
+ * buffer. This may be zero if buffer_length is
+ * zero.
+ * @param buffer_length
+ * Length of buffer in bytes.
+ * @param callback Function to call when this transaction
+ * completes. If the return value of this
+ * function isn't an error, then this function
+ * is guaranteed to be called when the
+ * transaction completes. If this parameter is
+ * NULL, then the generic callback registered
+ * through cvmx_usb_register_callback is
+ * called. If both are NULL, then there is no
+ * way to know when a transaction completes.
+ * @param user_data User supplied data returned when the
+ * callback is called. This is only used if
+ * callback in not NULL.
+ *
+ * @return A submitted transaction handle or negative on
+ * failure. Negative values are failure codes from
+ * cvmx_usb_status_t.
+ */
+extern int cvmx_usb_submit_control(cvmx_usb_state_t *state, int pipe_handle,
+ uint64_t control_header,
+ uint64_t buffer, int buffer_length,
+ cvmx_usb_callback_func_t callback,
+ void *user_data);
+
+/**
+ * Flags to pass the cvmx_usb_submit_isochronous() function.
+ */
+typedef enum
+{
+ CVMX_USB_ISOCHRONOUS_FLAGS_ALLOW_SHORT = 1<<0, /**< Do not return an error if a transfer is less than the maximum packet size of the device */
+ CVMX_USB_ISOCHRONOUS_FLAGS_ASAP = 1<<1, /**< Schedule the transaction as soon as possible */
+} cvmx_usb_isochronous_flags_t;
+
+/**
+ * Call to submit a USB Isochronous transfer to a pipe.
+ *
+ * @param state USB device state populated by
+ * cvmx_usb_initialize().
+ * @param pipe_handle
+ * Handle to the pipe for the transfer.
+ * @param start_frame
+ * Number of frames into the future to schedule
+ * this transaction.
+ * @param flags Flags to control the transfer. See
+ * cvmx_usb_isochronous_flags_t for the flag
+ * definitions.
+ * @param number_packets
+ * Number of sequential packets to transfer.
+ * "packets" is a pointer to an array of this
+ * many packet structures.
+ * @param packets Description of each transfer packet as
+ * defined by cvmx_usb_iso_packet_t. The array
+ * pointed to here must stay valid until the
+ * complete callback is called.
+ * @param buffer Physical address of the data buffer in
+ * memory. Note that this is NOT A POINTER, but
+ * the full 64bit physical address of the
+ * buffer. This may be zero if buffer_length is
+ * zero.
+ * @param buffer_length
+ * Length of buffer in bytes.
+ * @param callback Function to call when this transaction
+ * completes. If the return value of this
+ * function isn't an error, then this function
+ * is guaranteed to be called when the
+ * transaction completes. If this parameter is
+ * NULL, then the generic callback registered
+ * through cvmx_usb_register_callback is
+ * called. If both are NULL, then there is no
+ * way to know when a transaction completes.
+ * @param user_data User supplied data returned when the
+ * callback is called. This is only used if
+ * callback in not NULL.
+ *
+ * @return A submitted transaction handle or negative on
+ * failure. Negative values are failure codes from
+ * cvmx_usb_status_t.
+ */
+extern int cvmx_usb_submit_isochronous(cvmx_usb_state_t *state, int pipe_handle,
+ int start_frame, int flags,
+ int number_packets,
+ cvmx_usb_iso_packet_t packets[],
+ uint64_t buffer, int buffer_length,
+ cvmx_usb_callback_func_t callback,
+ void *user_data);
+
+/**
+ * Cancel one outstanding request in a pipe. Canceling a request
+ * can fail if the transaction has already completed before cancel
+ * is called. Even after a successful cancel call, it may take
+ * a frame or two for the cvmx_usb_poll() function to call the
+ * associated callback.
+ *
+ * @param state USB device state populated by
+ * cvmx_usb_initialize().
+ * @param pipe_handle
+ * Pipe handle to cancel requests in.
+ * @param submit_handle
+ * Handle to transaction to cancel, returned by the submit function.
+ *
+ * @return CVMX_USB_SUCCESS or a negative error code defined in
+ * cvmx_usb_status_t.
+ */
+extern cvmx_usb_status_t cvmx_usb_cancel(cvmx_usb_state_t *state,
+ int pipe_handle, int submit_handle);
+
+
+/**
+ * Cancel all outstanding requests in a pipe. Logically all this
+ * does is call cvmx_usb_cancel() in a loop.
+ *
+ * @param state USB device state populated by
+ * cvmx_usb_initialize().
+ * @param pipe_handle
+ * Pipe handle to cancel requests in.
+ *
+ * @return CVMX_USB_SUCCESS or a negative error code defined in
+ * cvmx_usb_status_t.
+ */
+extern cvmx_usb_status_t cvmx_usb_cancel_all(cvmx_usb_state_t *state,
+ int pipe_handle);
+
+/**
+ * Close a pipe created with cvmx_usb_open_pipe().
+ *
+ * @param state USB device state populated by
+ * cvmx_usb_initialize().
+ * @param pipe_handle
+ * Pipe handle to close.
+ *
+ * @return CVMX_USB_SUCCESS or a negative error code defined in
+ * cvmx_usb_status_t. CVMX_USB_BUSY is returned if the
+ * pipe has outstanding transfers.
+ */
+extern cvmx_usb_status_t cvmx_usb_close_pipe(cvmx_usb_state_t *state,
+ int pipe_handle);
+
+/**
+ * Register a function to be called when various USB events occur.
+ *
+ * @param state USB device state populated by
+ * cvmx_usb_initialize().
+ * @param reason Which event to register for.
+ * @param callback Function to call when the event occurs.
+ * @param user_data User data parameter to the function.
+ *
+ * @return CVMX_USB_SUCCESS or a negative error code defined in
+ * cvmx_usb_status_t.
+ */
+extern cvmx_usb_status_t cvmx_usb_register_callback(cvmx_usb_state_t *state,
+ cvmx_usb_callback_t reason,
+ cvmx_usb_callback_func_t callback,
+ void *user_data);
+
+/**
+ * Get the current USB protocol level frame number. The frame
+ * number is always in the range of 0-0x7ff.
+ *
+ * @param state USB device state populated by
+ * cvmx_usb_initialize().
+ *
+ * @return USB frame number
+ */
+extern int cvmx_usb_get_frame_number(cvmx_usb_state_t *state);
+
+/**
+ * Poll the USB block for status and call all needed callback
+ * handlers. This function is meant to be called in the interrupt
+ * handler for the USB controller. It can also be called
+ * periodically in a loop for non-interrupt based operation.
+ *
+ * @param state USB device state populated by
+ * cvmx_usb_initialize().
+ *
+ * @return CVMX_USB_SUCCESS or a negative error code defined in
+ * cvmx_usb_status_t.
+ */
+extern cvmx_usb_status_t cvmx_usb_poll(cvmx_usb_state_t *state);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CVMX_USB_H__ */
--- /dev/null
+/***********************license start***************
+ * Copyright (c) 2003-2010 Cavium Networks (support@cavium.com). All rights
+ * reserved.
+ *
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ *
+ * * Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials provided
+ * with the distribution.
+
+ * * Neither the name of Cavium Networks nor the names of
+ * its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written
+ * permission.
+
+ * This Software, including technical data, may be subject to U.S. export control
+ * laws, including the U.S. Export Administration Act and its associated
+ * regulations, and may be subject to export or import regulations in other
+ * countries.
+
+ * TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE SOFTWARE IS PROVIDED "AS IS"
+ * AND WITH ALL FAULTS AND CAVIUM NETWORKS MAKES NO PROMISES, REPRESENTATIONS OR
+ * WARRANTIES, EITHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, WITH RESPECT TO
+ * THE SOFTWARE, INCLUDING ITS CONDITION, ITS CONFORMITY TO ANY REPRESENTATION OR
+ * DESCRIPTION, OR THE EXISTENCE OF ANY LATENT OR PATENT DEFECTS, AND CAVIUM
+ * SPECIFICALLY DISCLAIMS ALL IMPLIED (IF ANY) WARRANTIES OF TITLE,
+ * MERCHANTABILITY, NONINFRINGEMENT, FITNESS FOR A PARTICULAR PURPOSE, LACK OF
+ * VIRUSES, ACCURACY OR COMPLETENESS, QUIET ENJOYMENT, QUIET POSSESSION OR
+ * CORRESPONDENCE TO DESCRIPTION. THE ENTIRE RISK ARISING OUT OF USE OR
+ * PERFORMANCE OF THE SOFTWARE LIES WITH YOU.
+ ***********************license end**************************************/
+
+
+/**
+ * cvmx-usbcx-defs.h
+ *
+ * Configuration and status register (CSR) type definitions for
+ * Octeon usbcx.
+ *
+ * This file is auto generated. Do not edit.
+ *
+ * <hr>$Revision$<hr>
+ *
+ */
+#ifndef __CVMX_USBCX_TYPEDEFS_H__
+#define __CVMX_USBCX_TYPEDEFS_H__
+
+#define CVMX_USBCX_DAINT(block_id) (CVMX_ADD_IO_SEG(0x00016F0010000818ull) + ((block_id) & 1) * 0x100000000000ull)
+#define CVMX_USBCX_DAINTMSK(block_id) (CVMX_ADD_IO_SEG(0x00016F001000081Cull) + ((block_id) & 1) * 0x100000000000ull)
+#define CVMX_USBCX_DCFG(block_id) (CVMX_ADD_IO_SEG(0x00016F0010000800ull) + ((block_id) & 1) * 0x100000000000ull)
+#define CVMX_USBCX_DCTL(block_id) (CVMX_ADD_IO_SEG(0x00016F0010000804ull) + ((block_id) & 1) * 0x100000000000ull)
+#define CVMX_USBCX_DIEPCTLX(offset, block_id) (CVMX_ADD_IO_SEG(0x00016F0010000900ull) + (((offset) & 7) + ((block_id) & 1) * 0x8000000000ull) * 32)
+#define CVMX_USBCX_DIEPINTX(offset, block_id) (CVMX_ADD_IO_SEG(0x00016F0010000908ull) + (((offset) & 7) + ((block_id) & 1) * 0x8000000000ull) * 32)
+#define CVMX_USBCX_DIEPMSK(block_id) (CVMX_ADD_IO_SEG(0x00016F0010000810ull) + ((block_id) & 1) * 0x100000000000ull)
+#define CVMX_USBCX_DIEPTSIZX(offset, block_id) (CVMX_ADD_IO_SEG(0x00016F0010000910ull) + (((offset) & 7) + ((block_id) & 1) * 0x8000000000ull) * 32)
+#define CVMX_USBCX_DOEPCTLX(offset, block_id) (CVMX_ADD_IO_SEG(0x00016F0010000B00ull) + (((offset) & 7) + ((block_id) & 1) * 0x8000000000ull) * 32)
+#define CVMX_USBCX_DOEPINTX(offset, block_id) (CVMX_ADD_IO_SEG(0x00016F0010000B08ull) + (((offset) & 7) + ((block_id) & 1) * 0x8000000000ull) * 32)
+#define CVMX_USBCX_DOEPMSK(block_id) (CVMX_ADD_IO_SEG(0x00016F0010000814ull) + ((block_id) & 1) * 0x100000000000ull)
+#define CVMX_USBCX_DOEPTSIZX(offset, block_id) (CVMX_ADD_IO_SEG(0x00016F0010000B10ull) + (((offset) & 7) + ((block_id) & 1) * 0x8000000000ull) * 32)
+#define CVMX_USBCX_DPTXFSIZX(offset, block_id) (CVMX_ADD_IO_SEG(0x00016F0010000100ull) + (((offset) & 7) + ((block_id) & 1) * 0x40000000000ull) * 4)
+#define CVMX_USBCX_DSTS(block_id) (CVMX_ADD_IO_SEG(0x00016F0010000808ull) + ((block_id) & 1) * 0x100000000000ull)
+#define CVMX_USBCX_DTKNQR1(block_id) (CVMX_ADD_IO_SEG(0x00016F0010000820ull) + ((block_id) & 1) * 0x100000000000ull)
+#define CVMX_USBCX_DTKNQR2(block_id) (CVMX_ADD_IO_SEG(0x00016F0010000824ull) + ((block_id) & 1) * 0x100000000000ull)
+#define CVMX_USBCX_DTKNQR3(block_id) (CVMX_ADD_IO_SEG(0x00016F0010000830ull) + ((block_id) & 1) * 0x100000000000ull)
+#define CVMX_USBCX_DTKNQR4(block_id) (CVMX_ADD_IO_SEG(0x00016F0010000834ull) + ((block_id) & 1) * 0x100000000000ull)
+#define CVMX_USBCX_GAHBCFG(block_id) (CVMX_ADD_IO_SEG(0x00016F0010000008ull) + ((block_id) & 1) * 0x100000000000ull)
+#define CVMX_USBCX_GHWCFG1(block_id) (CVMX_ADD_IO_SEG(0x00016F0010000044ull) + ((block_id) & 1) * 0x100000000000ull)
+#define CVMX_USBCX_GHWCFG2(block_id) (CVMX_ADD_IO_SEG(0x00016F0010000048ull) + ((block_id) & 1) * 0x100000000000ull)
+#define CVMX_USBCX_GHWCFG3(block_id) (CVMX_ADD_IO_SEG(0x00016F001000004Cull) + ((block_id) & 1) * 0x100000000000ull)
+#define CVMX_USBCX_GHWCFG4(block_id) (CVMX_ADD_IO_SEG(0x00016F0010000050ull) + ((block_id) & 1) * 0x100000000000ull)
+#define CVMX_USBCX_GINTMSK(block_id) (CVMX_ADD_IO_SEG(0x00016F0010000018ull) + ((block_id) & 1) * 0x100000000000ull)
+#define CVMX_USBCX_GINTSTS(block_id) (CVMX_ADD_IO_SEG(0x00016F0010000014ull) + ((block_id) & 1) * 0x100000000000ull)
+#define CVMX_USBCX_GNPTXFSIZ(block_id) (CVMX_ADD_IO_SEG(0x00016F0010000028ull) + ((block_id) & 1) * 0x100000000000ull)
+#define CVMX_USBCX_GNPTXSTS(block_id) (CVMX_ADD_IO_SEG(0x00016F001000002Cull) + ((block_id) & 1) * 0x100000000000ull)
+#define CVMX_USBCX_GOTGCTL(block_id) (CVMX_ADD_IO_SEG(0x00016F0010000000ull) + ((block_id) & 1) * 0x100000000000ull)
+#define CVMX_USBCX_GOTGINT(block_id) (CVMX_ADD_IO_SEG(0x00016F0010000004ull) + ((block_id) & 1) * 0x100000000000ull)
+#define CVMX_USBCX_GRSTCTL(block_id) (CVMX_ADD_IO_SEG(0x00016F0010000010ull) + ((block_id) & 1) * 0x100000000000ull)
+#define CVMX_USBCX_GRXFSIZ(block_id) (CVMX_ADD_IO_SEG(0x00016F0010000024ull) + ((block_id) & 1) * 0x100000000000ull)
+#define CVMX_USBCX_GRXSTSPD(block_id) (CVMX_ADD_IO_SEG(0x00016F0010040020ull) + ((block_id) & 1) * 0x100000000000ull)
+#define CVMX_USBCX_GRXSTSPH(block_id) (CVMX_ADD_IO_SEG(0x00016F0010000020ull) + ((block_id) & 1) * 0x100000000000ull)
+#define CVMX_USBCX_GRXSTSRD(block_id) (CVMX_ADD_IO_SEG(0x00016F001004001Cull) + ((block_id) & 1) * 0x100000000000ull)
+#define CVMX_USBCX_GRXSTSRH(block_id) (CVMX_ADD_IO_SEG(0x00016F001000001Cull) + ((block_id) & 1) * 0x100000000000ull)
+#define CVMX_USBCX_GSNPSID(block_id) (CVMX_ADD_IO_SEG(0x00016F0010000040ull) + ((block_id) & 1) * 0x100000000000ull)
+#define CVMX_USBCX_GUSBCFG(block_id) (CVMX_ADD_IO_SEG(0x00016F001000000Cull) + ((block_id) & 1) * 0x100000000000ull)
+#define CVMX_USBCX_HAINT(block_id) (CVMX_ADD_IO_SEG(0x00016F0010000414ull) + ((block_id) & 1) * 0x100000000000ull)
+#define CVMX_USBCX_HAINTMSK(block_id) (CVMX_ADD_IO_SEG(0x00016F0010000418ull) + ((block_id) & 1) * 0x100000000000ull)
+#define CVMX_USBCX_HCCHARX(offset, block_id) (CVMX_ADD_IO_SEG(0x00016F0010000500ull) + (((offset) & 7) + ((block_id) & 1) * 0x8000000000ull) * 32)
+#define CVMX_USBCX_HCFG(block_id) (CVMX_ADD_IO_SEG(0x00016F0010000400ull) + ((block_id) & 1) * 0x100000000000ull)
+#define CVMX_USBCX_HCINTMSKX(offset, block_id) (CVMX_ADD_IO_SEG(0x00016F001000050Cull) + (((offset) & 7) + ((block_id) & 1) * 0x8000000000ull) * 32)
+#define CVMX_USBCX_HCINTX(offset, block_id) (CVMX_ADD_IO_SEG(0x00016F0010000508ull) + (((offset) & 7) + ((block_id) & 1) * 0x8000000000ull) * 32)
+#define CVMX_USBCX_HCSPLTX(offset, block_id) (CVMX_ADD_IO_SEG(0x00016F0010000504ull) + (((offset) & 7) + ((block_id) & 1) * 0x8000000000ull) * 32)
+#define CVMX_USBCX_HCTSIZX(offset, block_id) (CVMX_ADD_IO_SEG(0x00016F0010000510ull) + (((offset) & 7) + ((block_id) & 1) * 0x8000000000ull) * 32)
+#define CVMX_USBCX_HFIR(block_id) (CVMX_ADD_IO_SEG(0x00016F0010000404ull) + ((block_id) & 1) * 0x100000000000ull)
+#define CVMX_USBCX_HFNUM(block_id) (CVMX_ADD_IO_SEG(0x00016F0010000408ull) + ((block_id) & 1) * 0x100000000000ull)
+#define CVMX_USBCX_HPRT(block_id) (CVMX_ADD_IO_SEG(0x00016F0010000440ull) + ((block_id) & 1) * 0x100000000000ull)
+#define CVMX_USBCX_HPTXFSIZ(block_id) (CVMX_ADD_IO_SEG(0x00016F0010000100ull) + ((block_id) & 1) * 0x100000000000ull)
+#define CVMX_USBCX_HPTXSTS(block_id) (CVMX_ADD_IO_SEG(0x00016F0010000410ull) + ((block_id) & 1) * 0x100000000000ull)
+#define CVMX_USBCX_NPTXDFIFOX(offset, block_id) (CVMX_ADD_IO_SEG(0x00016F0010001000ull) + (((offset) & 7) + ((block_id) & 1) * 0x100000000ull) * 4096)
+#define CVMX_USBCX_PCGCCTL(block_id) (CVMX_ADD_IO_SEG(0x00016F0010000E00ull) + ((block_id) & 1) * 0x100000000000ull)
+
+/**
+ * cvmx_usbc#_daint
+ *
+ * Device All Endpoints Interrupt Register (DAINT)
+ *
+ * When a significant event occurs on an endpoint, a Device All Endpoints Interrupt register
+ * interrupts the application using the Device OUT Endpoints Interrupt bit or Device IN Endpoints
+ * Interrupt bit of the Core Interrupt register (GINTSTS.OEPInt or GINTSTS.IEPInt, respectively).
+ * There is one interrupt bit per endpoint, up to a maximum of 16 bits for OUT endpoints and 16
+ * bits for IN endpoints. For a bidirectional endpoint, the corresponding IN and OUT interrupt
+ * bits are used. Bits in this register are set and cleared when the application sets and clears
+ * bits in the corresponding Device Endpoint-n Interrupt register (DIEPINTn/DOEPINTn).
+ */
+union cvmx_usbcx_daint
+{
+ uint32_t u32;
+ struct cvmx_usbcx_daint_s
+ {
+ uint32_t outepint : 16; /**< OUT Endpoint Interrupt Bits (OutEPInt)
+ One bit per OUT endpoint:
+ Bit 16 for OUT endpoint 0, bit 31 for OUT endpoint 15 */
+ uint32_t inepint : 16; /**< IN Endpoint Interrupt Bits (InEpInt)
+ One bit per IN Endpoint:
+ Bit 0 for IN endpoint 0, bit 15 for endpoint 15 */
+ } s;
+ struct cvmx_usbcx_daint_s cn30xx;
+ struct cvmx_usbcx_daint_s cn31xx;
+ struct cvmx_usbcx_daint_s cn50xx;
+ struct cvmx_usbcx_daint_s cn52xx;
+ struct cvmx_usbcx_daint_s cn52xxp1;
+ struct cvmx_usbcx_daint_s cn56xx;
+ struct cvmx_usbcx_daint_s cn56xxp1;
+};
+typedef union cvmx_usbcx_daint cvmx_usbcx_daint_t;
+
+/**
+ * cvmx_usbc#_daintmsk
+ *
+ * Device All Endpoints Interrupt Mask Register (DAINTMSK)
+ *
+ * The Device Endpoint Interrupt Mask register works with the Device Endpoint Interrupt register
+ * to interrupt the application when an event occurs on a device endpoint. However, the Device
+ * All Endpoints Interrupt (DAINT) register bit corresponding to that interrupt will still be set.
+ * Mask Interrupt: 1'b0 Unmask Interrupt: 1'b1
+ */
+union cvmx_usbcx_daintmsk
+{
+ uint32_t u32;
+ struct cvmx_usbcx_daintmsk_s
+ {
+ uint32_t outepmsk : 16; /**< OUT EP Interrupt Mask Bits (OutEpMsk)
+ One per OUT Endpoint:
+ Bit 16 for OUT EP 0, bit 31 for OUT EP 15 */
+ uint32_t inepmsk : 16; /**< IN EP Interrupt Mask Bits (InEpMsk)
+ One bit per IN Endpoint:
+ Bit 0 for IN EP 0, bit 15 for IN EP 15 */
+ } s;
+ struct cvmx_usbcx_daintmsk_s cn30xx;
+ struct cvmx_usbcx_daintmsk_s cn31xx;
+ struct cvmx_usbcx_daintmsk_s cn50xx;
+ struct cvmx_usbcx_daintmsk_s cn52xx;
+ struct cvmx_usbcx_daintmsk_s cn52xxp1;
+ struct cvmx_usbcx_daintmsk_s cn56xx;
+ struct cvmx_usbcx_daintmsk_s cn56xxp1;
+};
+typedef union cvmx_usbcx_daintmsk cvmx_usbcx_daintmsk_t;
+
+/**
+ * cvmx_usbc#_dcfg
+ *
+ * Device Configuration Register (DCFG)
+ *
+ * This register configures the core in Device mode after power-on or after certain control
+ * commands or enumeration. Do not make changes to this register after initial programming.
+ */
+union cvmx_usbcx_dcfg
+{
+ uint32_t u32;
+ struct cvmx_usbcx_dcfg_s
+ {
+ uint32_t reserved_23_31 : 9;
+ uint32_t epmiscnt : 5; /**< IN Endpoint Mismatch Count (EPMisCnt)
+ The application programs this filed with a count that determines
+ when the core generates an Endpoint Mismatch interrupt
+ (GINTSTS.EPMis). The core loads this value into an internal
+ counter and decrements it. The counter is reloaded whenever
+ there is a match or when the counter expires. The width of this
+ counter depends on the depth of the Token Queue. */
+ uint32_t reserved_13_17 : 5;
+ uint32_t perfrint : 2; /**< Periodic Frame Interval (PerFrInt)
+ Indicates the time within a (micro)frame at which the application
+ must be notified using the End Of Periodic Frame Interrupt. This
+ can be used to determine if all the isochronous traffic for that
+ (micro)frame is complete.
+ * 2'b00: 80% of the (micro)frame interval
+ * 2'b01: 85%
+ * 2'b10: 90%
+ * 2'b11: 95% */
+ uint32_t devaddr : 7; /**< Device Address (DevAddr)
+ The application must program this field after every SetAddress
+ control command. */
+ uint32_t reserved_3_3 : 1;
+ uint32_t nzstsouthshk : 1; /**< Non-Zero-Length Status OUT Handshake (NZStsOUTHShk)
+ The application can use this field to select the handshake the
+ core sends on receiving a nonzero-length data packet during
+ the OUT transaction of a control transfer's Status stage.
+ * 1'b1: Send a STALL handshake on a nonzero-length status
+ OUT transaction and do not send the received OUT packet to
+ the application.
+ * 1'b0: Send the received OUT packet to the application (zero-
+ length or nonzero-length) and send a handshake based on
+ the NAK and STALL bits for the endpoint in the Device
+ Endpoint Control register. */
+ uint32_t devspd : 2; /**< Device Speed (DevSpd)
+ Indicates the speed at which the application requires the core to
+ enumerate, or the maximum speed the application can support.
+ However, the actual bus speed is determined only after the
+ chirp sequence is completed, and is based on the speed of the
+ USB host to which the core is connected. See "Device
+ Initialization" on page 249 for details.
+ * 2'b00: High speed (USB 2.0 PHY clock is 30 MHz or 60 MHz)
+ * 2'b01: Full speed (USB 2.0 PHY clock is 30 MHz or 60 MHz)
+ * 2'b10: Low speed (USB 1.1 transceiver clock is 6 MHz). If
+ you select 6 MHz LS mode, you must do a soft reset.
+ * 2'b11: Full speed (USB 1.1 transceiver clock is 48 MHz) */
+ } s;
+ struct cvmx_usbcx_dcfg_s cn30xx;
+ struct cvmx_usbcx_dcfg_s cn31xx;
+ struct cvmx_usbcx_dcfg_s cn50xx;
+ struct cvmx_usbcx_dcfg_s cn52xx;
+ struct cvmx_usbcx_dcfg_s cn52xxp1;
+ struct cvmx_usbcx_dcfg_s cn56xx;
+ struct cvmx_usbcx_dcfg_s cn56xxp1;
+};
+typedef union cvmx_usbcx_dcfg cvmx_usbcx_dcfg_t;
+
+/**
+ * cvmx_usbc#_dctl
+ *
+ * Device Control Register (DCTL)
+ *
+ */
+union cvmx_usbcx_dctl
+{
+ uint32_t u32;
+ struct cvmx_usbcx_dctl_s
+ {
+ uint32_t reserved_12_31 : 20;
+ uint32_t pwronprgdone : 1; /**< Power-On Programming Done (PWROnPrgDone)
+ The application uses this bit to indicate that register
+ programming is completed after a wake-up from Power Down
+ mode. For more information, see "Device Mode Suspend and
+ Resume With Partial Power-Down" on page 357. */
+ uint32_t cgoutnak : 1; /**< Clear Global OUT NAK (CGOUTNak)
+ A write to this field clears the Global OUT NAK. */
+ uint32_t sgoutnak : 1; /**< Set Global OUT NAK (SGOUTNak)
+ A write to this field sets the Global OUT NAK.
+ The application uses this bit to send a NAK handshake on all
+ OUT endpoints.
+ The application should set the this bit only after making sure
+ that the Global OUT NAK Effective bit in the Core Interrupt
+ Register (GINTSTS.GOUTNakEff) is cleared. */
+ uint32_t cgnpinnak : 1; /**< Clear Global Non-Periodic IN NAK (CGNPInNak)
+ A write to this field clears the Global Non-Periodic IN NAK. */
+ uint32_t sgnpinnak : 1; /**< Set Global Non-Periodic IN NAK (SGNPInNak)
+ A write to this field sets the Global Non-Periodic IN NAK.The
+ application uses this bit to send a NAK handshake on all non-
+ periodic IN endpoints. The core can also set this bit when a
+ timeout condition is detected on a non-periodic endpoint.
+ The application should set this bit only after making sure that
+ the Global IN NAK Effective bit in the Core Interrupt Register
+ (GINTSTS.GINNakEff) is cleared. */
+ uint32_t tstctl : 3; /**< Test Control (TstCtl)
+ * 3'b000: Test mode disabled
+ * 3'b001: Test_J mode
+ * 3'b010: Test_K mode
+ * 3'b011: Test_SE0_NAK mode
+ * 3'b100: Test_Packet mode
+ * 3'b101: Test_Force_Enable
+ * Others: Reserved */
+ uint32_t goutnaksts : 1; /**< Global OUT NAK Status (GOUTNakSts)
+ * 1'b0: A handshake is sent based on the FIFO Status and the
+ NAK and STALL bit settings.
+ * 1'b1: No data is written to the RxFIFO, irrespective of space
+ availability. Sends a NAK handshake on all packets, except
+ on SETUP transactions. All isochronous OUT packets are
+ dropped. */
+ uint32_t gnpinnaksts : 1; /**< Global Non-Periodic IN NAK Status (GNPINNakSts)
+ * 1'b0: A handshake is sent out based on the data availability
+ in the transmit FIFO.
+ * 1'b1: A NAK handshake is sent out on all non-periodic IN
+ endpoints, irrespective of the data availability in the transmit
+ FIFO. */
+ uint32_t sftdiscon : 1; /**< Soft Disconnect (SftDiscon)
+ The application uses this bit to signal the O2P USB core to do a
+ soft disconnect. As long as this bit is set, the host will not see
+ that the device is connected, and the device will not receive
+ signals on the USB. The core stays in the disconnected state
+ until the application clears this bit.
+ The minimum duration for which the core must keep this bit set
+ is specified in Minimum Duration for Soft Disconnect .
+ * 1'b0: Normal operation. When this bit is cleared after a soft
+ disconnect, the core drives the phy_opmode_o signal on the
+ UTMI+ to 2'b00, which generates a device connect event to
+ the USB host. When the device is reconnected, the USB host
+ restarts device enumeration.
+ * 1'b1: The core drives the phy_opmode_o signal on the
+ UTMI+ to 2'b01, which generates a device disconnect event
+ to the USB host. */
+ uint32_t rmtwkupsig : 1; /**< Remote Wakeup Signaling (RmtWkUpSig)
+ When the application sets this bit, the core initiates remote
+ signaling to wake up the USB host.The application must set this
+ bit to get the core out of Suspended state and must clear this bit
+ after the core comes out of Suspended state. */
+ } s;
+ struct cvmx_usbcx_dctl_s cn30xx;
+ struct cvmx_usbcx_dctl_s cn31xx;
+ struct cvmx_usbcx_dctl_s cn50xx;
+ struct cvmx_usbcx_dctl_s cn52xx;
+ struct cvmx_usbcx_dctl_s cn52xxp1;
+ struct cvmx_usbcx_dctl_s cn56xx;
+ struct cvmx_usbcx_dctl_s cn56xxp1;
+};
+typedef union cvmx_usbcx_dctl cvmx_usbcx_dctl_t;
+
+/**
+ * cvmx_usbc#_diepctl#
+ *
+ * Device IN Endpoint-n Control Register (DIEPCTLn)
+ *
+ * The application uses the register to control the behaviour of each logical endpoint other than endpoint 0.
+ */
+union cvmx_usbcx_diepctlx
+{
+ uint32_t u32;
+ struct cvmx_usbcx_diepctlx_s
+ {
+ uint32_t epena : 1; /**< Endpoint Enable (EPEna)
+ Indicates that data is ready to be transmitted on the endpoint.
+ The core clears this bit before setting any of the following
+ interrupts on this endpoint:
+ * Endpoint Disabled
+ * Transfer Completed */
+ uint32_t epdis : 1; /**< Endpoint Disable (EPDis)
+ The application sets this bit to stop transmitting data on an
+ endpoint, even before the transfer for that endpoint is complete.
+ The application must wait for the Endpoint Disabled interrupt
+ before treating the endpoint as disabled. The core clears this bit
+ before setting the Endpoint Disabled Interrupt. The application
+ should set this bit only if Endpoint Enable is already set for this
+ endpoint. */
+ uint32_t setd1pid : 1; /**< For Interrupt/BULK enpoints:
+ Set DATA1 PID (SetD1PID)
+ Writing to this field sets the Endpoint Data Pid (DPID) field in
+ this register to DATA1.
+ For Isochronous endpoints:
+ Set Odd (micro)frame (SetOddFr)
+ Writing to this field sets the Even/Odd (micro)frame (EO_FrNum)
+ field to odd (micro)frame. */
+ uint32_t setd0pid : 1; /**< For Interrupt/BULK enpoints:
+ Writing to this field sets the Endpoint Data Pid (DPID) field in
+ this register to DATA0.
+ For Isochronous endpoints:
+ Set Odd (micro)frame (SetEvenFr)
+ Writing to this field sets the Even/Odd (micro)frame (EO_FrNum)
+ field to even (micro)frame. */
+ uint32_t snak : 1; /**< Set NAK (SNAK)
+ A write to this bit sets the NAK bit for the endpoint.
+ Using this bit, the application can control the transmission of
+ NAK handshakes on an endpoint. The core can also set this bit
+ for an endpoint after a SETUP packet is received on the
+ endpoint. */
+ uint32_t cnak : 1; /**< Clear NAK (CNAK)
+ A write to this bit clears the NAK bit for the endpoint. */
+ uint32_t txfnum : 4; /**< TxFIFO Number (TxFNum)
+ Non-periodic endpoints must set this bit to zero. Periodic
+ endpoints must map this to the corresponding Periodic TxFIFO
+ number.
+ * 4'h0: Non-Periodic TxFIFO
+ * Others: Specified Periodic TxFIFO number */
+ uint32_t stall : 1; /**< STALL Handshake (Stall)
+ For non-control, non-isochronous endpoints:
+ The application sets this bit to stall all tokens from the USB host
+ to this endpoint. If a NAK bit, Global Non-Periodic IN NAK, or
+ Global OUT NAK is set along with this bit, the STALL bit takes
+ priority. Only the application can clear this bit, never the core.
+ For control endpoints:
+ The application can only set this bit, and the core clears it, when
+ a SETUP token i received for this endpoint. If a NAK bit, Global
+ Non-Periodic IN NAK, or Global OUT NAK is set along with this
+ bit, the STALL bit takes priority. Irrespective of this bit's setting,
+ the core always responds to SETUP data packets with an ACK handshake. */
+ uint32_t reserved_20_20 : 1;
+ uint32_t eptype : 2; /**< Endpoint Type (EPType)
+ This is the transfer type supported by this logical endpoint.
+ * 2'b00: Control
+ * 2'b01: Isochronous
+ * 2'b10: Bulk
+ * 2'b11: Interrupt */
+ uint32_t naksts : 1; /**< NAK Status (NAKSts)
+ Indicates the following:
+ * 1'b0: The core is transmitting non-NAK handshakes based
+ on the FIFO status
+ * 1'b1: The core is transmitting NAK handshakes on this
+ endpoint.
+ When either the application or the core sets this bit:
+ * For non-isochronous IN endpoints: The core stops
+ transmitting any data on an IN endpoint, even if data is
+ available in the TxFIFO.
+ * For isochronous IN endpoints: The core sends out a zero-
+ length data packet, even if data is available in the TxFIFO.
+ Irrespective of this bit's setting, the core always responds to
+ SETUP data packets with an ACK handshake. */
+ uint32_t dpid : 1; /**< For interrupt/bulk IN and OUT endpoints:
+ Endpoint Data PID (DPID)
+ Contains the PID of the packet to be received or transmitted on
+ this endpoint. The application should program the PID of the first
+ packet to be received or transmitted on this endpoint, after the
+ endpoint is activated. Applications use the SetD1PID and
+ SetD0PID fields of this register to program either DATA0 or
+ DATA1 PID.
+ * 1'b0: DATA0
+ * 1'b1: DATA1
+ For isochronous IN and OUT endpoints:
+ Even/Odd (Micro)Frame (EO_FrNum)
+ Indicates the (micro)frame number in which the core transmits/
+ receives isochronous data for this endpoint. The application
+ should program the even/odd (micro) frame number in which it
+ intends to transmit/receive isochronous data for this endpoint
+ using the SetEvnFr and SetOddFr fields in this register.
+ * 1'b0: Even (micro)frame
+ * 1'b1: Odd (micro)frame */
+ uint32_t usbactep : 1; /**< USB Active Endpoint (USBActEP)
+ Indicates whether this endpoint is active in the current
+ configuration and interface. The core clears this bit for all
+ endpoints (other than EP 0) after detecting a USB reset. After
+ receiving the SetConfiguration and SetInterface commands, the
+ application must program endpoint registers accordingly and set
+ this bit. */
+ uint32_t nextep : 4; /**< Next Endpoint (NextEp)
+ Applies to non-periodic IN endpoints only.
+ Indicates the endpoint number to be fetched after the data for
+ the current endpoint is fetched. The core can access this field,
+ even when the Endpoint Enable (EPEna) bit is not set. This
+ field is not valid in Slave mode. */
+ uint32_t mps : 11; /**< Maximum Packet Size (MPS)
+ Applies to IN and OUT endpoints.
+ The application must program this field with the maximum
+ packet size for the current logical endpoint. This value is in
+ bytes. */
+ } s;
+ struct cvmx_usbcx_diepctlx_s cn30xx;
+ struct cvmx_usbcx_diepctlx_s cn31xx;
+ struct cvmx_usbcx_diepctlx_s cn50xx;
+ struct cvmx_usbcx_diepctlx_s cn52xx;
+ struct cvmx_usbcx_diepctlx_s cn52xxp1;
+ struct cvmx_usbcx_diepctlx_s cn56xx;
+ struct cvmx_usbcx_diepctlx_s cn56xxp1;
+};
+typedef union cvmx_usbcx_diepctlx cvmx_usbcx_diepctlx_t;
+
+/**
+ * cvmx_usbc#_diepint#
+ *
+ * Device Endpoint-n Interrupt Register (DIEPINTn)
+ *
+ * This register indicates the status of an endpoint with respect to
+ * USB- and AHB-related events. The application must read this register
+ * when the OUT Endpoints Interrupt bit or IN Endpoints Interrupt bit of
+ * the Core Interrupt register (GINTSTS.OEPInt or GINTSTS.IEPInt,
+ * respectively) is set. Before the application can read this register,
+ * it must first read the Device All Endpoints Interrupt (DAINT) register
+ * to get the exact endpoint number for the Device Endpoint-n Interrupt
+ * register. The application must clear the appropriate bit in this register
+ * to clear the corresponding bits in the DAINT and GINTSTS registers.
+ */
+union cvmx_usbcx_diepintx
+{
+ uint32_t u32;
+ struct cvmx_usbcx_diepintx_s
+ {
+ uint32_t reserved_7_31 : 25;
+ uint32_t inepnakeff : 1; /**< IN Endpoint NAK Effective (INEPNakEff)
+ Applies to periodic IN endpoints only.
+ Indicates that the IN endpoint NAK bit set by the application has
+ taken effect in the core. This bit can be cleared when the
+ application clears the IN endpoint NAK by writing to
+ DIEPCTLn.CNAK.
+ This interrupt indicates that the core has sampled the NAK bit
+ set (either by the application or by the core).
+ This interrupt does not necessarily mean that a NAK handshake
+ is sent on the USB. A STALL bit takes priority over a NAK bit. */
+ uint32_t intknepmis : 1; /**< IN Token Received with EP Mismatch (INTknEPMis)
+ Applies to non-periodic IN endpoints only.
+ Indicates that the data in the top of the non-periodic TxFIFO
+ belongs to an endpoint other than the one for which the IN
+ token was received. This interrupt is asserted on the endpoint
+ for which the IN token was received. */
+ uint32_t intkntxfemp : 1; /**< IN Token Received When TxFIFO is Empty (INTknTXFEmp)
+ Applies only to non-periodic IN endpoints.
+ Indicates that an IN token was received when the associated
+ TxFIFO (periodic/non-periodic) was empty. This interrupt is
+ asserted on the endpoint for which the IN token was received. */
+ uint32_t timeout : 1; /**< Timeout Condition (TimeOUT)
+ Applies to non-isochronous IN endpoints only.
+ Indicates that the core has detected a timeout condition on the
+ USB for the last IN token on this endpoint. */
+ uint32_t ahberr : 1; /**< AHB Error (AHBErr)
+ This is generated only in Internal DMA mode when there is an
+ AHB error during an AHB read/write. The application can read
+ the corresponding endpoint DMA address register to get the
+ error address. */
+ uint32_t epdisbld : 1; /**< Endpoint Disabled Interrupt (EPDisbld)
+ This bit indicates that the endpoint is disabled per the
+ application's request. */
+ uint32_t xfercompl : 1; /**< Transfer Completed Interrupt (XferCompl)
+ Indicates that the programmed transfer is complete on the AHB
+ as well as on the USB, for this endpoint. */
+ } s;
+ struct cvmx_usbcx_diepintx_s cn30xx;
+ struct cvmx_usbcx_diepintx_s cn31xx;
+ struct cvmx_usbcx_diepintx_s cn50xx;
+ struct cvmx_usbcx_diepintx_s cn52xx;
+ struct cvmx_usbcx_diepintx_s cn52xxp1;
+ struct cvmx_usbcx_diepintx_s cn56xx;
+ struct cvmx_usbcx_diepintx_s cn56xxp1;
+};
+typedef union cvmx_usbcx_diepintx cvmx_usbcx_diepintx_t;
+
+/**
+ * cvmx_usbc#_diepmsk
+ *
+ * Device IN Endpoint Common Interrupt Mask Register (DIEPMSK)
+ *
+ * This register works with each of the Device IN Endpoint Interrupt (DIEPINTn) registers
+ * for all endpoints to generate an interrupt per IN endpoint. The IN endpoint interrupt
+ * for a specific status in the DIEPINTn register can be masked by writing to the corresponding
+ * bit in this register. Status bits are masked by default.
+ * Mask interrupt: 1'b0 Unmask interrupt: 1'b1
+ */
+union cvmx_usbcx_diepmsk
+{
+ uint32_t u32;
+ struct cvmx_usbcx_diepmsk_s
+ {
+ uint32_t reserved_7_31 : 25;
+ uint32_t inepnakeffmsk : 1; /**< IN Endpoint NAK Effective Mask (INEPNakEffMsk) */
+ uint32_t intknepmismsk : 1; /**< IN Token received with EP Mismatch Mask (INTknEPMisMsk) */
+ uint32_t intkntxfempmsk : 1; /**< IN Token Received When TxFIFO Empty Mask
+ (INTknTXFEmpMsk) */
+ uint32_t timeoutmsk : 1; /**< Timeout Condition Mask (TimeOUTMsk)
+ (Non-isochronous endpoints) */
+ uint32_t ahberrmsk : 1; /**< AHB Error Mask (AHBErrMsk) */
+ uint32_t epdisbldmsk : 1; /**< Endpoint Disabled Interrupt Mask (EPDisbldMsk) */
+ uint32_t xfercomplmsk : 1; /**< Transfer Completed Interrupt Mask (XferComplMsk) */
+ } s;
+ struct cvmx_usbcx_diepmsk_s cn30xx;
+ struct cvmx_usbcx_diepmsk_s cn31xx;
+ struct cvmx_usbcx_diepmsk_s cn50xx;
+ struct cvmx_usbcx_diepmsk_s cn52xx;
+ struct cvmx_usbcx_diepmsk_s cn52xxp1;
+ struct cvmx_usbcx_diepmsk_s cn56xx;
+ struct cvmx_usbcx_diepmsk_s cn56xxp1;
+};
+typedef union cvmx_usbcx_diepmsk cvmx_usbcx_diepmsk_t;
+
+/**
+ * cvmx_usbc#_dieptsiz#
+ *
+ * Device Endpoint-n Transfer Size Register (DIEPTSIZn)
+ *
+ * The application must modify this register before enabling the endpoint.
+ * Once the endpoint is enabled using Endpoint Enable bit of the Device Endpoint-n Control registers (DIEPCTLn.EPEna/DOEPCTLn.EPEna),
+ * the core modifies this register. The application can only read this register once the core has cleared the Endpoint Enable bit.
+ * This register is used only for endpoints other than Endpoint 0.
+ */
+union cvmx_usbcx_dieptsizx
+{
+ uint32_t u32;
+ struct cvmx_usbcx_dieptsizx_s
+ {
+ uint32_t reserved_31_31 : 1;
+ uint32_t mc : 2; /**< Multi Count (MC)
+ Applies to IN endpoints only.
+ For periodic IN endpoints, this field indicates the number of
+ packets that must be transmitted per microframe on the USB.
+ The core uses this field to calculate the data PID for
+ isochronous IN endpoints.
+ * 2'b01: 1 packet
+ * 2'b10: 2 packets
+ * 2'b11: 3 packets
+ For non-periodic IN endpoints, this field is valid only in Internal
+ DMA mode. It specifies the number of packets the core should
+ fetch for an IN endpoint before it switches to the endpoint
+ pointed to by the Next Endpoint field of the Device Endpoint-n
+ Control register (DIEPCTLn.NextEp) */
+ uint32_t pktcnt : 10; /**< Packet Count (PktCnt)
+ Indicates the total number of USB packets that constitute the
+ Transfer Size amount of data for this endpoint.
+ IN Endpoints: This field is decremented every time a packet
+ (maximum size or short packet) is read from the TxFIFO. */
+ uint32_t xfersize : 19; /**< Transfer Size (XferSize)
+ This field contains the transfer size in bytes for the current
+ endpoint.
+ The core only interrupts the application after it has exhausted
+ the transfer size amount of data. The transfer size can be set to
+ the maximum packet size of the endpoint, to be interrupted at
+ the end of each packet.
+ IN Endpoints: The core decrements this field every time a
+ packet from the external memory is written to the TxFIFO. */
+ } s;
+ struct cvmx_usbcx_dieptsizx_s cn30xx;
+ struct cvmx_usbcx_dieptsizx_s cn31xx;
+ struct cvmx_usbcx_dieptsizx_s cn50xx;
+ struct cvmx_usbcx_dieptsizx_s cn52xx;
+ struct cvmx_usbcx_dieptsizx_s cn52xxp1;
+ struct cvmx_usbcx_dieptsizx_s cn56xx;
+ struct cvmx_usbcx_dieptsizx_s cn56xxp1;
+};
+typedef union cvmx_usbcx_dieptsizx cvmx_usbcx_dieptsizx_t;
+
+/**
+ * cvmx_usbc#_doepctl#
+ *
+ * Device OUT Endpoint-n Control Register (DOEPCTLn)
+ *
+ * The application uses the register to control the behaviour of each logical endpoint other than endpoint 0.
+ */
+union cvmx_usbcx_doepctlx
+{
+ uint32_t u32;
+ struct cvmx_usbcx_doepctlx_s
+ {
+ uint32_t epena : 1; /**< Endpoint Enable (EPEna)
+ Indicates that the application has allocated the memory tp start
+ receiving data from the USB.
+ The core clears this bit before setting any of the following
+ interrupts on this endpoint:
+ * SETUP Phase Done
+ * Endpoint Disabled
+ * Transfer Completed
+ For control OUT endpoints in DMA mode, this bit must be set
+ to be able to transfer SETUP data packets in memory. */
+ uint32_t epdis : 1; /**< Endpoint Disable (EPDis)
+ The application sets this bit to stop transmitting data on an
+ endpoint, even before the transfer for that endpoint is complete.
+ The application must wait for the Endpoint Disabled interrupt
+ before treating the endpoint as disabled. The core clears this bit
+ before setting the Endpoint Disabled Interrupt. The application
+ should set this bit only if Endpoint Enable is already set for this
+ endpoint. */
+ uint32_t setd1pid : 1; /**< For Interrupt/BULK enpoints:
+ Set DATA1 PID (SetD1PID)
+ Writing to this field sets the Endpoint Data Pid (DPID) field in
+ this register to DATA1.
+ For Isochronous endpoints:
+ Set Odd (micro)frame (SetOddFr)
+ Writing to this field sets the Even/Odd (micro)frame (EO_FrNum)
+ field to odd (micro)frame. */
+ uint32_t setd0pid : 1; /**< For Interrupt/BULK enpoints:
+ Writing to this field sets the Endpoint Data Pid (DPID) field in
+ this register to DATA0.
+ For Isochronous endpoints:
+ Set Odd (micro)frame (SetEvenFr)
+ Writing to this field sets the Even/Odd (micro)frame (EO_FrNum)
+ field to even (micro)frame. */
+ uint32_t snak : 1; /**< Set NAK (SNAK)
+ A write to this bit sets the NAK bit for the endpoint.
+ Using this bit, the application can control the transmission of
+ NAK handshakes on an endpoint. The core can also set this bit
+ for an endpoint after a SETUP packet is received on the
+ endpoint. */
+ uint32_t cnak : 1; /**< Clear NAK (CNAK)
+ A write to this bit clears the NAK bit for the endpoint. */
+ uint32_t reserved_22_25 : 4;
+ uint32_t stall : 1; /**< STALL Handshake (Stall)
+ For non-control, non-isochronous endpoints:
+ The application sets this bit to stall all tokens from the USB host
+ to this endpoint. If a NAK bit, Global Non-Periodic IN NAK, or
+ Global OUT NAK is set along with this bit, the STALL bit takes
+ priority. Only the application can clear this bit, never the core.
+ For control endpoints:
+ The application can only set this bit, and the core clears it, when
+ a SETUP token i received for this endpoint. If a NAK bit, Global
+ Non-Periodic IN NAK, or Global OUT NAK is set along with this
+ bit, the STALL bit takes priority. Irrespective of this bit's setting,
+ the core always responds to SETUP data packets with an ACK handshake. */
+ uint32_t snp : 1; /**< Snoop Mode (Snp)
+ This bit configures the endpoint to Snoop mode. In Snoop mode,
+ the core does not check the correctness of OUT packets before
+ transferring them to application memory. */
+ uint32_t eptype : 2; /**< Endpoint Type (EPType)
+ This is the transfer type supported by this logical endpoint.
+ * 2'b00: Control
+ * 2'b01: Isochronous
+ * 2'b10: Bulk
+ * 2'b11: Interrupt */
+ uint32_t naksts : 1; /**< NAK Status (NAKSts)
+ Indicates the following:
+ * 1'b0: The core is transmitting non-NAK handshakes based
+ on the FIFO status
+ * 1'b1: The core is transmitting NAK handshakes on this
+ endpoint.
+ When either the application or the core sets this bit:
+ * The core stops receiving any data on an OUT endpoint, even
+ if there is space in the RxFIFO to accomodate the incoming
+ packet. */
+ uint32_t dpid : 1; /**< For interrupt/bulk IN and OUT endpoints:
+ Endpoint Data PID (DPID)
+ Contains the PID of the packet to be received or transmitted on
+ this endpoint. The application should program the PID of the first
+ packet to be received or transmitted on this endpoint, after the
+ endpoint is activated. Applications use the SetD1PID and
+ SetD0PID fields of this register to program either DATA0 or
+ DATA1 PID.
+ * 1'b0: DATA0
+ * 1'b1: DATA1
+ For isochronous IN and OUT endpoints:
+ Even/Odd (Micro)Frame (EO_FrNum)
+ Indicates the (micro)frame number in which the core transmits/
+ receives isochronous data for this endpoint. The application
+ should program the even/odd (micro) frame number in which it
+ intends to transmit/receive isochronous data for this endpoint
+ using the SetEvnFr and SetOddFr fields in this register.
+ * 1'b0: Even (micro)frame
+ * 1'b1: Odd (micro)frame */
+ uint32_t usbactep : 1; /**< USB Active Endpoint (USBActEP)
+ Indicates whether this endpoint is active in the current
+ configuration and interface. The core clears this bit for all
+ endpoints (other than EP 0) after detecting a USB reset. After
+ receiving the SetConfiguration and SetInterface commands, the
+ application must program endpoint registers accordingly and set
+ this bit. */
+ uint32_t reserved_11_14 : 4;
+ uint32_t mps : 11; /**< Maximum Packet Size (MPS)
+ Applies to IN and OUT endpoints.
+ The application must program this field with the maximum
+ packet size for the current logical endpoint. This value is in
+ bytes. */
+ } s;
+ struct cvmx_usbcx_doepctlx_s cn30xx;
+ struct cvmx_usbcx_doepctlx_s cn31xx;
+ struct cvmx_usbcx_doepctlx_s cn50xx;
+ struct cvmx_usbcx_doepctlx_s cn52xx;
+ struct cvmx_usbcx_doepctlx_s cn52xxp1;
+ struct cvmx_usbcx_doepctlx_s cn56xx;
+ struct cvmx_usbcx_doepctlx_s cn56xxp1;
+};
+typedef union cvmx_usbcx_doepctlx cvmx_usbcx_doepctlx_t;
+
+/**
+ * cvmx_usbc#_doepint#
+ *
+ * Device Endpoint-n Interrupt Register (DOEPINTn)
+ *
+ * This register indicates the status of an endpoint with respect to USB- and AHB-related events.
+ * The application must read this register when the OUT Endpoints Interrupt bit or IN Endpoints
+ * Interrupt bit of the Core Interrupt register (GINTSTS.OEPInt or GINTSTS.IEPInt, respectively)
+ * is set. Before the application can read this register, it must first read the Device All
+ * Endpoints Interrupt (DAINT) register to get the exact endpoint number for the Device Endpoint-n
+ * Interrupt register. The application must clear the appropriate bit in this register to clear the
+ * corresponding bits in the DAINT and GINTSTS registers.
+ */
+union cvmx_usbcx_doepintx
+{
+ uint32_t u32;
+ struct cvmx_usbcx_doepintx_s
+ {
+ uint32_t reserved_5_31 : 27;
+ uint32_t outtknepdis : 1; /**< OUT Token Received When Endpoint Disabled (OUTTknEPdis)
+ Applies only to control OUT endpoints.
+ Indicates that an OUT token was received when the endpoint
+ was not yet enabled. This interrupt is asserted on the endpoint
+ for which the OUT token was received. */
+ uint32_t setup : 1; /**< SETUP Phase Done (SetUp)
+ Applies to control OUT endpoints only.
+ Indicates that the SETUP phase for the control endpoint is
+ complete and no more back-to-back SETUP packets were
+ received for the current control transfer. On this interrupt, the
+ application can decode the received SETUP data packet. */
+ uint32_t ahberr : 1; /**< AHB Error (AHBErr)
+ This is generated only in Internal DMA mode when there is an
+ AHB error during an AHB read/write. The application can read
+ the corresponding endpoint DMA address register to get the
+ error address. */
+ uint32_t epdisbld : 1; /**< Endpoint Disabled Interrupt (EPDisbld)
+ This bit indicates that the endpoint is disabled per the
+ application's request. */
+ uint32_t xfercompl : 1; /**< Transfer Completed Interrupt (XferCompl)
+ Indicates that the programmed transfer is complete on the AHB
+ as well as on the USB, for this endpoint. */
+ } s;
+ struct cvmx_usbcx_doepintx_s cn30xx;
+ struct cvmx_usbcx_doepintx_s cn31xx;
+ struct cvmx_usbcx_doepintx_s cn50xx;
+ struct cvmx_usbcx_doepintx_s cn52xx;
+ struct cvmx_usbcx_doepintx_s cn52xxp1;
+ struct cvmx_usbcx_doepintx_s cn56xx;
+ struct cvmx_usbcx_doepintx_s cn56xxp1;
+};
+typedef union cvmx_usbcx_doepintx cvmx_usbcx_doepintx_t;
+
+/**
+ * cvmx_usbc#_doepmsk
+ *
+ * Device OUT Endpoint Common Interrupt Mask Register (DOEPMSK)
+ *
+ * This register works with each of the Device OUT Endpoint Interrupt (DOEPINTn) registers
+ * for all endpoints to generate an interrupt per OUT endpoint. The OUT endpoint interrupt
+ * for a specific status in the DOEPINTn register can be masked by writing into the
+ * corresponding bit in this register. Status bits are masked by default.
+ * Mask interrupt: 1'b0 Unmask interrupt: 1'b1
+ */
+union cvmx_usbcx_doepmsk
+{
+ uint32_t u32;
+ struct cvmx_usbcx_doepmsk_s
+ {
+ uint32_t reserved_5_31 : 27;
+ uint32_t outtknepdismsk : 1; /**< OUT Token Received when Endpoint Disabled Mask
+ (OUTTknEPdisMsk)
+ Applies to control OUT endpoints only. */
+ uint32_t setupmsk : 1; /**< SETUP Phase Done Mask (SetUPMsk)
+ Applies to control endpoints only. */
+ uint32_t ahberrmsk : 1; /**< AHB Error (AHBErrMsk) */
+ uint32_t epdisbldmsk : 1; /**< Endpoint Disabled Interrupt Mask (EPDisbldMsk) */
+ uint32_t xfercomplmsk : 1; /**< Transfer Completed Interrupt Mask (XferComplMsk) */
+ } s;
+ struct cvmx_usbcx_doepmsk_s cn30xx;
+ struct cvmx_usbcx_doepmsk_s cn31xx;
+ struct cvmx_usbcx_doepmsk_s cn50xx;
+ struct cvmx_usbcx_doepmsk_s cn52xx;
+ struct cvmx_usbcx_doepmsk_s cn52xxp1;
+ struct cvmx_usbcx_doepmsk_s cn56xx;
+ struct cvmx_usbcx_doepmsk_s cn56xxp1;
+};
+typedef union cvmx_usbcx_doepmsk cvmx_usbcx_doepmsk_t;
+
+/**
+ * cvmx_usbc#_doeptsiz#
+ *
+ * Device Endpoint-n Transfer Size Register (DOEPTSIZn)
+ *
+ * The application must modify this register before enabling the endpoint.
+ * Once the endpoint is enabled using Endpoint Enable bit of the Device Endpoint-n Control
+ * registers (DOEPCTLn.EPEna/DOEPCTLn.EPEna), the core modifies this register. The application
+ * can only read this register once the core has cleared the Endpoint Enable bit.
+ * This register is used only for endpoints other than Endpoint 0.
+ */
+union cvmx_usbcx_doeptsizx
+{
+ uint32_t u32;
+ struct cvmx_usbcx_doeptsizx_s
+ {
+ uint32_t reserved_31_31 : 1;
+ uint32_t mc : 2; /**< Multi Count (MC)
+ Received Data PID (RxDPID)
+ Applies to isochronous OUT endpoints only.
+ This is the data PID received in the last packet for this endpoint.
+ 2'b00: DATA0
+ 2'b01: DATA1
+ 2'b10: DATA2
+ 2'b11: MDATA
+ SETUP Packet Count (SUPCnt)
+ Applies to control OUT Endpoints only.
+ This field specifies the number of back-to-back SETUP data
+ packets the endpoint can receive.
+ 2'b01: 1 packet
+ 2'b10: 2 packets
+ 2'b11: 3 packets */
+ uint32_t pktcnt : 10; /**< Packet Count (PktCnt)
+ Indicates the total number of USB packets that constitute the
+ Transfer Size amount of data for this endpoint.
+ OUT Endpoints: This field is decremented every time a
+ packet (maximum size or short packet) is written to the
+ RxFIFO. */
+ uint32_t xfersize : 19; /**< Transfer Size (XferSize)
+ This field contains the transfer size in bytes for the current
+ endpoint.
+ The core only interrupts the application after it has exhausted
+ the transfer size amount of data. The transfer size can be set to
+ the maximum packet size of the endpoint, to be interrupted at
+ the end of each packet.
+ OUT Endpoints: The core decrements this field every time a
+ packet is read from the RxFIFO and written to the external
+ memory. */
+ } s;
+ struct cvmx_usbcx_doeptsizx_s cn30xx;
+ struct cvmx_usbcx_doeptsizx_s cn31xx;
+ struct cvmx_usbcx_doeptsizx_s cn50xx;
+ struct cvmx_usbcx_doeptsizx_s cn52xx;
+ struct cvmx_usbcx_doeptsizx_s cn52xxp1;
+ struct cvmx_usbcx_doeptsizx_s cn56xx;
+ struct cvmx_usbcx_doeptsizx_s cn56xxp1;
+};
+typedef union cvmx_usbcx_doeptsizx cvmx_usbcx_doeptsizx_t;
+
+/**
+ * cvmx_usbc#_dptxfsiz#
+ *
+ * Device Periodic Transmit FIFO-n Size Register (DPTXFSIZ)
+ *
+ * This register holds the memory start address of each periodic TxFIFO to implemented
+ * in Device mode. Each periodic FIFO holds the data for one periodic IN endpoint.
+ * This register is repeated for each periodic FIFO instantiated.
+ */
+union cvmx_usbcx_dptxfsizx
+{
+ uint32_t u32;
+ struct cvmx_usbcx_dptxfsizx_s
+ {
+ uint32_t dptxfsize : 16; /**< Device Periodic TxFIFO Size (DPTxFSize)
+ This value is in terms of 32-bit words.
+ * Minimum value is 4
+ * Maximum value is 768 */
+ uint32_t dptxfstaddr : 16; /**< Device Periodic TxFIFO RAM Start Address (DPTxFStAddr)
+ Holds the start address in the RAM for this periodic FIFO. */
+ } s;
+ struct cvmx_usbcx_dptxfsizx_s cn30xx;
+ struct cvmx_usbcx_dptxfsizx_s cn31xx;
+ struct cvmx_usbcx_dptxfsizx_s cn50xx;
+ struct cvmx_usbcx_dptxfsizx_s cn52xx;
+ struct cvmx_usbcx_dptxfsizx_s cn52xxp1;
+ struct cvmx_usbcx_dptxfsizx_s cn56xx;
+ struct cvmx_usbcx_dptxfsizx_s cn56xxp1;
+};
+typedef union cvmx_usbcx_dptxfsizx cvmx_usbcx_dptxfsizx_t;
+
+/**
+ * cvmx_usbc#_dsts
+ *
+ * Device Status Register (DSTS)
+ *
+ * This register indicates the status of the core with respect to USB-related events.
+ * It must be read on interrupts from Device All Interrupts (DAINT) register.
+ */
+union cvmx_usbcx_dsts
+{
+ uint32_t u32;
+ struct cvmx_usbcx_dsts_s
+ {
+ uint32_t reserved_22_31 : 10;
+ uint32_t soffn : 14; /**< Frame or Microframe Number of the Received SOF (SOFFN)
+ When the core is operating at high speed, this field contains a
+ microframe number. When the core is operating at full or low
+ speed, this field contains a frame number. */
+ uint32_t reserved_4_7 : 4;
+ uint32_t errticerr : 1; /**< Erratic Error (ErrticErr)
+ The core sets this bit to report any erratic errors
+ (phy_rxvalid_i/phy_rxvldh_i or phy_rxactive_i is asserted for at
+ least 2 ms, due to PHY error) seen on the UTMI+.
+ Due to erratic errors, the O2P USB core goes into Suspended
+ state and an interrupt is generated to the application with Early
+ Suspend bit of the Core Interrupt register (GINTSTS.ErlySusp).
+ If the early suspend is asserted due to an erratic error, the
+ application can only perform a soft disconnect recover. */
+ uint32_t enumspd : 2; /**< Enumerated Speed (EnumSpd)
+ Indicates the speed at which the O2P USB core has come up
+ after speed detection through a chirp sequence.
+ * 2'b00: High speed (PHY clock is running at 30 or 60 MHz)
+ * 2'b01: Full speed (PHY clock is running at 30 or 60 MHz)
+ * 2'b10: Low speed (PHY clock is running at 6 MHz)
+ * 2'b11: Full speed (PHY clock is running at 48 MHz)
+ Low speed is not supported for devices using a UTMI+ PHY. */
+ uint32_t suspsts : 1; /**< Suspend Status (SuspSts)
+ In Device mode, this bit is set as long as a Suspend condition is
+ detected on the USB. The core enters the Suspended state
+ when there is no activity on the phy_line_state_i signal for an
+ extended period of time. The core comes out of the suspend:
+ * When there is any activity on the phy_line_state_i signal
+ * When the application writes to the Remote Wakeup Signaling
+ bit in the Device Control register (DCTL.RmtWkUpSig). */
+ } s;
+ struct cvmx_usbcx_dsts_s cn30xx;
+ struct cvmx_usbcx_dsts_s cn31xx;
+ struct cvmx_usbcx_dsts_s cn50xx;
+ struct cvmx_usbcx_dsts_s cn52xx;
+ struct cvmx_usbcx_dsts_s cn52xxp1;
+ struct cvmx_usbcx_dsts_s cn56xx;
+ struct cvmx_usbcx_dsts_s cn56xxp1;
+};
+typedef union cvmx_usbcx_dsts cvmx_usbcx_dsts_t;
+
+/**
+ * cvmx_usbc#_dtknqr1
+ *
+ * Device IN Token Sequence Learning Queue Read Register 1 (DTKNQR1)
+ *
+ * The depth of the IN Token Sequence Learning Queue is specified for Device Mode IN Token
+ * Sequence Learning Queue Depth. The queue is 4 bits wide to store the endpoint number.
+ * A read from this register returns the first 5 endpoint entries of the IN Token Sequence
+ * Learning Queue. When the queue is full, the new token is pushed into the queue and oldest
+ * token is discarded.
+ */
+union cvmx_usbcx_dtknqr1
+{
+ uint32_t u32;
+ struct cvmx_usbcx_dtknqr1_s
+ {
+ uint32_t eptkn : 24; /**< Endpoint Token (EPTkn)
+ Four bits per token represent the endpoint number of the token:
+ * Bits [31:28]: Endpoint number of Token 5
+ * Bits [27:24]: Endpoint number of Token 4
+ - .......
+ * Bits [15:12]: Endpoint number of Token 1
+ * Bits [11:8]: Endpoint number of Token 0 */
+ uint32_t wrapbit : 1; /**< Wrap Bit (WrapBit)
+ This bit is set when the write pointer wraps. It is cleared when
+ the learning queue is cleared. */
+ uint32_t reserved_5_6 : 2;
+ uint32_t intknwptr : 5; /**< IN Token Queue Write Pointer (INTknWPtr) */
+ } s;
+ struct cvmx_usbcx_dtknqr1_s cn30xx;
+ struct cvmx_usbcx_dtknqr1_s cn31xx;
+ struct cvmx_usbcx_dtknqr1_s cn50xx;
+ struct cvmx_usbcx_dtknqr1_s cn52xx;
+ struct cvmx_usbcx_dtknqr1_s cn52xxp1;
+ struct cvmx_usbcx_dtknqr1_s cn56xx;
+ struct cvmx_usbcx_dtknqr1_s cn56xxp1;
+};
+typedef union cvmx_usbcx_dtknqr1 cvmx_usbcx_dtknqr1_t;
+
+/**
+ * cvmx_usbc#_dtknqr2
+ *
+ * Device IN Token Sequence Learning Queue Read Register 2 (DTKNQR2)
+ *
+ * A read from this register returns the next 8 endpoint entries of the learning queue.
+ */
+union cvmx_usbcx_dtknqr2
+{
+ uint32_t u32;
+ struct cvmx_usbcx_dtknqr2_s
+ {
+ uint32_t eptkn : 32; /**< Endpoint Token (EPTkn)
+ Four bits per token represent the endpoint number of the token:
+ * Bits [31:28]: Endpoint number of Token 13
+ * Bits [27:24]: Endpoint number of Token 12
+ - .......
+ * Bits [7:4]: Endpoint number of Token 7
+ * Bits [3:0]: Endpoint number of Token 6 */
+ } s;
+ struct cvmx_usbcx_dtknqr2_s cn30xx;
+ struct cvmx_usbcx_dtknqr2_s cn31xx;
+ struct cvmx_usbcx_dtknqr2_s cn50xx;
+ struct cvmx_usbcx_dtknqr2_s cn52xx;
+ struct cvmx_usbcx_dtknqr2_s cn52xxp1;
+ struct cvmx_usbcx_dtknqr2_s cn56xx;
+ struct cvmx_usbcx_dtknqr2_s cn56xxp1;
+};
+typedef union cvmx_usbcx_dtknqr2 cvmx_usbcx_dtknqr2_t;
+
+/**
+ * cvmx_usbc#_dtknqr3
+ *
+ * Device IN Token Sequence Learning Queue Read Register 3 (DTKNQR3)
+ *
+ * A read from this register returns the next 8 endpoint entries of the learning queue.
+ */
+union cvmx_usbcx_dtknqr3
+{
+ uint32_t u32;
+ struct cvmx_usbcx_dtknqr3_s
+ {
+ uint32_t eptkn : 32; /**< Endpoint Token (EPTkn)
+ Four bits per token represent the endpoint number of the token:
+ * Bits [31:28]: Endpoint number of Token 21
+ * Bits [27:24]: Endpoint number of Token 20
+ - .......
+ * Bits [7:4]: Endpoint number of Token 15
+ * Bits [3:0]: Endpoint number of Token 14 */
+ } s;
+ struct cvmx_usbcx_dtknqr3_s cn30xx;
+ struct cvmx_usbcx_dtknqr3_s cn31xx;
+ struct cvmx_usbcx_dtknqr3_s cn50xx;
+ struct cvmx_usbcx_dtknqr3_s cn52xx;
+ struct cvmx_usbcx_dtknqr3_s cn52xxp1;
+ struct cvmx_usbcx_dtknqr3_s cn56xx;
+ struct cvmx_usbcx_dtknqr3_s cn56xxp1;
+};
+typedef union cvmx_usbcx_dtknqr3 cvmx_usbcx_dtknqr3_t;
+
+/**
+ * cvmx_usbc#_dtknqr4
+ *
+ * Device IN Token Sequence Learning Queue Read Register 4 (DTKNQR4)
+ *
+ * A read from this register returns the last 8 endpoint entries of the learning queue.
+ */
+union cvmx_usbcx_dtknqr4
+{
+ uint32_t u32;
+ struct cvmx_usbcx_dtknqr4_s
+ {
+ uint32_t eptkn : 32; /**< Endpoint Token (EPTkn)
+ Four bits per token represent the endpoint number of the token:
+ * Bits [31:28]: Endpoint number of Token 29
+ * Bits [27:24]: Endpoint number of Token 28
+ - .......
+ * Bits [7:4]: Endpoint number of Token 23
+ * Bits [3:0]: Endpoint number of Token 22 */
+ } s;
+ struct cvmx_usbcx_dtknqr4_s cn30xx;
+ struct cvmx_usbcx_dtknqr4_s cn31xx;
+ struct cvmx_usbcx_dtknqr4_s cn50xx;
+ struct cvmx_usbcx_dtknqr4_s cn52xx;
+ struct cvmx_usbcx_dtknqr4_s cn52xxp1;
+ struct cvmx_usbcx_dtknqr4_s cn56xx;
+ struct cvmx_usbcx_dtknqr4_s cn56xxp1;
+};
+typedef union cvmx_usbcx_dtknqr4 cvmx_usbcx_dtknqr4_t;
+
+/**
+ * cvmx_usbc#_gahbcfg
+ *
+ * Core AHB Configuration Register (GAHBCFG)
+ *
+ * This register can be used to configure the core after power-on or a change in mode of operation.
+ * This register mainly contains AHB system-related configuration parameters. The AHB is the processor
+ * interface to the O2P USB core. In general, software need not know about this interface except to
+ * program the values as specified.
+ *
+ * The application must program this register as part of the O2P USB core initialization.
+ * Do not change this register after the initial programming.
+ */
+union cvmx_usbcx_gahbcfg
+{
+ uint32_t u32;
+ struct cvmx_usbcx_gahbcfg_s
+ {
+ uint32_t reserved_9_31 : 23;
+ uint32_t ptxfemplvl : 1; /**< Periodic TxFIFO Empty Level (PTxFEmpLvl)
+ Software should set this bit to 0x1.
+ Indicates when the Periodic TxFIFO Empty Interrupt bit in the
+ Core Interrupt register (GINTSTS.PTxFEmp) is triggered. This
+ bit is used only in Slave mode.
+ * 1'b0: GINTSTS.PTxFEmp interrupt indicates that the Periodic
+ TxFIFO is half empty
+ * 1'b1: GINTSTS.PTxFEmp interrupt indicates that the Periodic
+ TxFIFO is completely empty */
+ uint32_t nptxfemplvl : 1; /**< Non-Periodic TxFIFO Empty Level (NPTxFEmpLvl)
+ Software should set this bit to 0x1.
+ Indicates when the Non-Periodic TxFIFO Empty Interrupt bit in
+ the Core Interrupt register (GINTSTS.NPTxFEmp) is triggered.
+ This bit is used only in Slave mode.
+ * 1'b0: GINTSTS.NPTxFEmp interrupt indicates that the Non-
+ Periodic TxFIFO is half empty
+ * 1'b1: GINTSTS.NPTxFEmp interrupt indicates that the Non-
+ Periodic TxFIFO is completely empty */
+ uint32_t reserved_6_6 : 1;
+ uint32_t dmaen : 1; /**< DMA Enable (DMAEn)
+ * 1'b0: Core operates in Slave mode
+ * 1'b1: Core operates in a DMA mode */
+ uint32_t hbstlen : 4; /**< Burst Length/Type (HBstLen)
+ This field has not effect and should be left as 0x0. */
+ uint32_t glblintrmsk : 1; /**< Global Interrupt Mask (GlblIntrMsk)
+ Software should set this field to 0x1.
+ The application uses this bit to mask or unmask the interrupt
+ line assertion to itself. Irrespective of this bit's setting, the
+ interrupt status registers are updated by the core.
+ * 1'b0: Mask the interrupt assertion to the application.
+ * 1'b1: Unmask the interrupt assertion to the application. */
+ } s;
+ struct cvmx_usbcx_gahbcfg_s cn30xx;
+ struct cvmx_usbcx_gahbcfg_s cn31xx;
+ struct cvmx_usbcx_gahbcfg_s cn50xx;
+ struct cvmx_usbcx_gahbcfg_s cn52xx;
+ struct cvmx_usbcx_gahbcfg_s cn52xxp1;
+ struct cvmx_usbcx_gahbcfg_s cn56xx;
+ struct cvmx_usbcx_gahbcfg_s cn56xxp1;
+};
+typedef union cvmx_usbcx_gahbcfg cvmx_usbcx_gahbcfg_t;
+
+/**
+ * cvmx_usbc#_ghwcfg1
+ *
+ * User HW Config1 Register (GHWCFG1)
+ *
+ * This register contains the logical endpoint direction(s) of the O2P USB core.
+ */
+union cvmx_usbcx_ghwcfg1
+{
+ uint32_t u32;
+ struct cvmx_usbcx_ghwcfg1_s
+ {
+ uint32_t epdir : 32; /**< Endpoint Direction (epdir)
+ Two bits per endpoint represent the direction.
+ * 2'b00: BIDIR (IN and OUT) endpoint
+ * 2'b01: IN endpoint
+ * 2'b10: OUT endpoint
+ * 2'b11: Reserved
+ Bits [31:30]: Endpoint 15 direction
+ Bits [29:28]: Endpoint 14 direction
+ - ...
+ Bits [3:2]: Endpoint 1 direction
+ Bits[1:0]: Endpoint 0 direction (always BIDIR) */
+ } s;
+ struct cvmx_usbcx_ghwcfg1_s cn30xx;
+ struct cvmx_usbcx_ghwcfg1_s cn31xx;
+ struct cvmx_usbcx_ghwcfg1_s cn50xx;
+ struct cvmx_usbcx_ghwcfg1_s cn52xx;
+ struct cvmx_usbcx_ghwcfg1_s cn52xxp1;
+ struct cvmx_usbcx_ghwcfg1_s cn56xx;
+ struct cvmx_usbcx_ghwcfg1_s cn56xxp1;
+};
+typedef union cvmx_usbcx_ghwcfg1 cvmx_usbcx_ghwcfg1_t;
+
+/**
+ * cvmx_usbc#_ghwcfg2
+ *
+ * User HW Config2 Register (GHWCFG2)
+ *
+ * This register contains configuration options of the O2P USB core.
+ */
+union cvmx_usbcx_ghwcfg2
+{
+ uint32_t u32;
+ struct cvmx_usbcx_ghwcfg2_s
+ {
+ uint32_t reserved_31_31 : 1;
+ uint32_t tknqdepth : 5; /**< Device Mode IN Token Sequence Learning Queue Depth
+ (TknQDepth)
+ Range: 0-30 */
+ uint32_t ptxqdepth : 2; /**< Host Mode Periodic Request Queue Depth (PTxQDepth)
+ * 2'b00: 2
+ * 2'b01: 4
+ * 2'b10: 8
+ * Others: Reserved */
+ uint32_t nptxqdepth : 2; /**< Non-Periodic Request Queue Depth (NPTxQDepth)
+ * 2'b00: 2
+ * 2'b01: 4
+ * 2'b10: 8
+ * Others: Reserved */
+ uint32_t reserved_20_21 : 2;
+ uint32_t dynfifosizing : 1; /**< Dynamic FIFO Sizing Enabled (DynFifoSizing)
+ * 1'b0: No
+ * 1'b1: Yes */
+ uint32_t periosupport : 1; /**< Periodic OUT Channels Supported in Host Mode
+ (PerioSupport)
+ * 1'b0: No
+ * 1'b1: Yes */
+ uint32_t numhstchnl : 4; /**< Number of Host Channels (NumHstChnl)
+ Indicates the number of host channels supported by the core in
+ Host mode. The range of this field is 0-15: 0 specifies 1
+ channel, 15 specifies 16 channels. */
+ uint32_t numdeveps : 4; /**< Number of Device Endpoints (NumDevEps)
+ Indicates the number of device endpoints supported by the core
+ in Device mode in addition to control endpoint 0. The range of
+ this field is 1-15. */
+ uint32_t fsphytype : 2; /**< Full-Speed PHY Interface Type (FSPhyType)
+ * 2'b00: Full-speed interface not supported
+ * 2'b01: Dedicated full-speed interface
+ * 2'b10: FS pins shared with UTMI+ pins
+ * 2'b11: FS pins shared with ULPI pins */
+ uint32_t hsphytype : 2; /**< High-Speed PHY Interface Type (HSPhyType)
+ * 2'b00: High-Speed interface not supported
+ * 2'b01: UTMI+
+ * 2'b10: ULPI
+ * 2'b11: UTMI+ and ULPI */
+ uint32_t singpnt : 1; /**< Point-to-Point (SingPnt)
+ * 1'b0: Multi-point application
+ * 1'b1: Single-point application */
+ uint32_t otgarch : 2; /**< Architecture (OtgArch)
+ * 2'b00: Slave-Only
+ * 2'b01: External DMA
+ * 2'b10: Internal DMA
+ * Others: Reserved */
+ uint32_t otgmode : 3; /**< Mode of Operation (OtgMode)
+ * 3'b000: HNP- and SRP-Capable OTG (Host & Device)
+ * 3'b001: SRP-Capable OTG (Host & Device)
+ * 3'b010: Non-HNP and Non-SRP Capable OTG (Host &
+ Device)
+ * 3'b011: SRP-Capable Device
+ * 3'b100: Non-OTG Device
+ * 3'b101: SRP-Capable Host
+ * 3'b110: Non-OTG Host
+ * Others: Reserved */
+ } s;
+ struct cvmx_usbcx_ghwcfg2_s cn30xx;
+ struct cvmx_usbcx_ghwcfg2_s cn31xx;
+ struct cvmx_usbcx_ghwcfg2_s cn50xx;
+ struct cvmx_usbcx_ghwcfg2_s cn52xx;
+ struct cvmx_usbcx_ghwcfg2_s cn52xxp1;
+ struct cvmx_usbcx_ghwcfg2_s cn56xx;
+ struct cvmx_usbcx_ghwcfg2_s cn56xxp1;
+};
+typedef union cvmx_usbcx_ghwcfg2 cvmx_usbcx_ghwcfg2_t;
+
+/**
+ * cvmx_usbc#_ghwcfg3
+ *
+ * User HW Config3 Register (GHWCFG3)
+ *
+ * This register contains the configuration options of the O2P USB core.
+ */
+union cvmx_usbcx_ghwcfg3
+{
+ uint32_t u32;
+ struct cvmx_usbcx_ghwcfg3_s
+ {
+ uint32_t dfifodepth : 16; /**< DFIFO Depth (DfifoDepth)
+ This value is in terms of 32-bit words.
+ * Minimum value is 32
+ * Maximum value is 32768 */
+ uint32_t reserved_13_15 : 3;
+ uint32_t ahbphysync : 1; /**< AHB and PHY Synchronous (AhbPhySync)
+ Indicates whether AHB and PHY clocks are synchronous to
+ each other.
+ * 1'b0: No
+ * 1'b1: Yes
+ This bit is tied to 1. */
+ uint32_t rsttype : 1; /**< Reset Style for Clocked always Blocks in RTL (RstType)
+ * 1'b0: Asynchronous reset is used in the core
+ * 1'b1: Synchronous reset is used in the core */
+ uint32_t optfeature : 1; /**< Optional Features Removed (OptFeature)
+ Indicates whether the User ID register, GPIO interface ports,
+ and SOF toggle and counter ports were removed for gate count
+ optimization. */
+ uint32_t vendor_control_interface_support : 1;/**< Vendor Control Interface Support
+ * 1'b0: Vendor Control Interface is not available on the core.
+ * 1'b1: Vendor Control Interface is available. */
+ uint32_t i2c_selection : 1; /**< I2C Selection
+ * 1'b0: I2C Interface is not available on the core.
+ * 1'b1: I2C Interface is available on the core. */
+ uint32_t otgen : 1; /**< OTG Function Enabled (OtgEn)
+ The application uses this bit to indicate the O2P USB core's
+ OTG capabilities.
+ * 1'b0: Not OTG capable
+ * 1'b1: OTG Capable */
+ uint32_t pktsizewidth : 3; /**< Width of Packet Size Counters (PktSizeWidth)
+ * 3'b000: 4 bits
+ * 3'b001: 5 bits
+ * 3'b010: 6 bits
+ * 3'b011: 7 bits
+ * 3'b100: 8 bits
+ * 3'b101: 9 bits
+ * 3'b110: 10 bits
+ * Others: Reserved */
+ uint32_t xfersizewidth : 4; /**< Width of Transfer Size Counters (XferSizeWidth)
+ * 4'b0000: 11 bits
+ * 4'b0001: 12 bits
+ - ...
+ * 4'b1000: 19 bits
+ * Others: Reserved */
+ } s;
+ struct cvmx_usbcx_ghwcfg3_s cn30xx;
+ struct cvmx_usbcx_ghwcfg3_s cn31xx;
+ struct cvmx_usbcx_ghwcfg3_s cn50xx;
+ struct cvmx_usbcx_ghwcfg3_s cn52xx;
+ struct cvmx_usbcx_ghwcfg3_s cn52xxp1;
+ struct cvmx_usbcx_ghwcfg3_s cn56xx;
+ struct cvmx_usbcx_ghwcfg3_s cn56xxp1;
+};
+typedef union cvmx_usbcx_ghwcfg3 cvmx_usbcx_ghwcfg3_t;
+
+/**
+ * cvmx_usbc#_ghwcfg4
+ *
+ * User HW Config4 Register (GHWCFG4)
+ *
+ * This register contains the configuration options of the O2P USB core.
+ */
+union cvmx_usbcx_ghwcfg4
+{
+ uint32_t u32;
+ struct cvmx_usbcx_ghwcfg4_s
+ {
+ uint32_t reserved_30_31 : 2;
+ uint32_t numdevmodinend : 4; /**< Enable dedicatd transmit FIFO for device IN endpoints. */
+ uint32_t endedtrfifo : 1; /**< Enable dedicatd transmit FIFO for device IN endpoints. */
+ uint32_t sessendfltr : 1; /**< "session_end" Filter Enabled (SessEndFltr)
+ * 1'b0: No filter
+ * 1'b1: Filter */
+ uint32_t bvalidfltr : 1; /**< "b_valid" Filter Enabled (BValidFltr)
+ * 1'b0: No filter
+ * 1'b1: Filter */
+ uint32_t avalidfltr : 1; /**< "a_valid" Filter Enabled (AValidFltr)
+ * 1'b0: No filter
+ * 1'b1: Filter */
+ uint32_t vbusvalidfltr : 1; /**< "vbus_valid" Filter Enabled (VBusValidFltr)
+ * 1'b0: No filter
+ * 1'b1: Filter */
+ uint32_t iddgfltr : 1; /**< "iddig" Filter Enable (IddgFltr)
+ * 1'b0: No filter
+ * 1'b1: Filter */
+ uint32_t numctleps : 4; /**< Number of Device Mode Control Endpoints in Addition to
+ Endpoint 0 (NumCtlEps)
+ Range: 1-15 */
+ uint32_t phydatawidth : 2; /**< UTMI+ PHY/ULPI-to-Internal UTMI+ Wrapper Data Width
+ (PhyDataWidth)
+ When a ULPI PHY is used, an internal wrapper converts ULPI
+ to UTMI+.
+ * 2'b00: 8 bits
+ * 2'b01: 16 bits
+ * 2'b10: 8/16 bits, software selectable
+ * Others: Reserved */
+ uint32_t reserved_6_13 : 8;
+ uint32_t ahbfreq : 1; /**< Minimum AHB Frequency Less Than 60 MHz (AhbFreq)
+ * 1'b0: No
+ * 1'b1: Yes */
+ uint32_t enablepwropt : 1; /**< Enable Power Optimization? (EnablePwrOpt)
+ * 1'b0: No
+ * 1'b1: Yes */
+ uint32_t numdevperioeps : 4; /**< Number of Device Mode Periodic IN Endpoints
+ (NumDevPerioEps)
+ Range: 0-15 */
+ } s;
+ struct cvmx_usbcx_ghwcfg4_cn30xx
+ {
+ uint32_t reserved_25_31 : 7;
+ uint32_t sessendfltr : 1; /**< "session_end" Filter Enabled (SessEndFltr)
+ * 1'b0: No filter
+ * 1'b1: Filter */
+ uint32_t bvalidfltr : 1; /**< "b_valid" Filter Enabled (BValidFltr)
+ * 1'b0: No filter
+ * 1'b1: Filter */
+ uint32_t avalidfltr : 1; /**< "a_valid" Filter Enabled (AValidFltr)
+ * 1'b0: No filter
+ * 1'b1: Filter */
+ uint32_t vbusvalidfltr : 1; /**< "vbus_valid" Filter Enabled (VBusValidFltr)
+ * 1'b0: No filter
+ * 1'b1: Filter */
+ uint32_t iddgfltr : 1; /**< "iddig" Filter Enable (IddgFltr)
+ * 1'b0: No filter
+ * 1'b1: Filter */
+ uint32_t numctleps : 4; /**< Number of Device Mode Control Endpoints in Addition to
+ Endpoint 0 (NumCtlEps)
+ Range: 1-15 */
+ uint32_t phydatawidth : 2; /**< UTMI+ PHY/ULPI-to-Internal UTMI+ Wrapper Data Width
+ (PhyDataWidth)
+ When a ULPI PHY is used, an internal wrapper converts ULPI
+ to UTMI+.
+ * 2'b00: 8 bits
+ * 2'b01: 16 bits
+ * 2'b10: 8/16 bits, software selectable
+ * Others: Reserved */
+ uint32_t reserved_6_13 : 8;
+ uint32_t ahbfreq : 1; /**< Minimum AHB Frequency Less Than 60 MHz (AhbFreq)
+ * 1'b0: No
+ * 1'b1: Yes */
+ uint32_t enablepwropt : 1; /**< Enable Power Optimization? (EnablePwrOpt)
+ * 1'b0: No
+ * 1'b1: Yes */
+ uint32_t numdevperioeps : 4; /**< Number of Device Mode Periodic IN Endpoints
+ (NumDevPerioEps)
+ Range: 0-15 */
+ } cn30xx;
+ struct cvmx_usbcx_ghwcfg4_cn30xx cn31xx;
+ struct cvmx_usbcx_ghwcfg4_s cn50xx;
+ struct cvmx_usbcx_ghwcfg4_s cn52xx;
+ struct cvmx_usbcx_ghwcfg4_s cn52xxp1;
+ struct cvmx_usbcx_ghwcfg4_s cn56xx;
+ struct cvmx_usbcx_ghwcfg4_s cn56xxp1;
+};
+typedef union cvmx_usbcx_ghwcfg4 cvmx_usbcx_ghwcfg4_t;
+
+/**
+ * cvmx_usbc#_gintmsk
+ *
+ * Core Interrupt Mask Register (GINTMSK)
+ *
+ * This register works with the Core Interrupt register to interrupt the application.
+ * When an interrupt bit is masked, the interrupt associated with that bit will not be generated.
+ * However, the Core Interrupt (GINTSTS) register bit corresponding to that interrupt will still be set.
+ * Mask interrupt: 1'b0, Unmask interrupt: 1'b1
+ */
+union cvmx_usbcx_gintmsk
+{
+ uint32_t u32;
+ struct cvmx_usbcx_gintmsk_s
+ {
+ uint32_t wkupintmsk : 1; /**< Resume/Remote Wakeup Detected Interrupt Mask
+ (WkUpIntMsk) */
+ uint32_t sessreqintmsk : 1; /**< Session Request/New Session Detected Interrupt Mask
+ (SessReqIntMsk) */
+ uint32_t disconnintmsk : 1; /**< Disconnect Detected Interrupt Mask (DisconnIntMsk) */
+ uint32_t conidstschngmsk : 1; /**< Connector ID Status Change Mask (ConIDStsChngMsk) */
+ uint32_t reserved_27_27 : 1;
+ uint32_t ptxfempmsk : 1; /**< Periodic TxFIFO Empty Mask (PTxFEmpMsk) */
+ uint32_t hchintmsk : 1; /**< Host Channels Interrupt Mask (HChIntMsk) */
+ uint32_t prtintmsk : 1; /**< Host Port Interrupt Mask (PrtIntMsk) */
+ uint32_t reserved_23_23 : 1;
+ uint32_t fetsuspmsk : 1; /**< Data Fetch Suspended Mask (FetSuspMsk) */
+ uint32_t incomplpmsk : 1; /**< Incomplete Periodic Transfer Mask (incomplPMsk)
+ Incomplete Isochronous OUT Transfer Mask
+ (incompISOOUTMsk) */
+ uint32_t incompisoinmsk : 1; /**< Incomplete Isochronous IN Transfer Mask (incompISOINMsk) */
+ uint32_t oepintmsk : 1; /**< OUT Endpoints Interrupt Mask (OEPIntMsk) */
+ uint32_t inepintmsk : 1; /**< IN Endpoints Interrupt Mask (INEPIntMsk) */
+ uint32_t epmismsk : 1; /**< Endpoint Mismatch Interrupt Mask (EPMisMsk) */
+ uint32_t reserved_16_16 : 1;
+ uint32_t eopfmsk : 1; /**< End of Periodic Frame Interrupt Mask (EOPFMsk) */
+ uint32_t isooutdropmsk : 1; /**< Isochronous OUT Packet Dropped Interrupt Mask
+ (ISOOutDropMsk) */
+ uint32_t enumdonemsk : 1; /**< Enumeration Done Mask (EnumDoneMsk) */
+ uint32_t usbrstmsk : 1; /**< USB Reset Mask (USBRstMsk) */
+ uint32_t usbsuspmsk : 1; /**< USB Suspend Mask (USBSuspMsk) */
+ uint32_t erlysuspmsk : 1; /**< Early Suspend Mask (ErlySuspMsk) */
+ uint32_t i2cint : 1; /**< I2C Interrupt Mask (I2CINT) */
+ uint32_t ulpickintmsk : 1; /**< ULPI Carkit Interrupt Mask (ULPICKINTMsk)
+ I2C Carkit Interrupt Mask (I2CCKINTMsk) */
+ uint32_t goutnakeffmsk : 1; /**< Global OUT NAK Effective Mask (GOUTNakEffMsk) */
+ uint32_t ginnakeffmsk : 1; /**< Global Non-Periodic IN NAK Effective Mask (GINNakEffMsk) */
+ uint32_t nptxfempmsk : 1; /**< Non-Periodic TxFIFO Empty Mask (NPTxFEmpMsk) */
+ uint32_t rxflvlmsk : 1; /**< Receive FIFO Non-Empty Mask (RxFLvlMsk) */
+ uint32_t sofmsk : 1; /**< Start of (micro)Frame Mask (SofMsk) */
+ uint32_t otgintmsk : 1; /**< OTG Interrupt Mask (OTGIntMsk) */
+ uint32_t modemismsk : 1; /**< Mode Mismatch Interrupt Mask (ModeMisMsk) */
+ uint32_t reserved_0_0 : 1;
+ } s;
+ struct cvmx_usbcx_gintmsk_s cn30xx;
+ struct cvmx_usbcx_gintmsk_s cn31xx;
+ struct cvmx_usbcx_gintmsk_s cn50xx;
+ struct cvmx_usbcx_gintmsk_s cn52xx;
+ struct cvmx_usbcx_gintmsk_s cn52xxp1;
+ struct cvmx_usbcx_gintmsk_s cn56xx;
+ struct cvmx_usbcx_gintmsk_s cn56xxp1;
+};
+typedef union cvmx_usbcx_gintmsk cvmx_usbcx_gintmsk_t;
+
+/**
+ * cvmx_usbc#_gintsts
+ *
+ * Core Interrupt Register (GINTSTS)
+ *
+ * This register interrupts the application for system-level events in the current mode of operation
+ * (Device mode or Host mode). It is shown in Interrupt. Some of the bits in this register are valid only in Host mode,
+ * while others are valid in Device mode only. This register also indicates the current mode of operation.
+ * In order to clear the interrupt status bits of type R_SS_WC, the application must write 1'b1 into the bit.
+ * The FIFO status interrupts are read only; once software reads from or writes to the FIFO while servicing these
+ * interrupts, FIFO interrupt conditions are cleared automatically.
+ */
+union cvmx_usbcx_gintsts
+{
+ uint32_t u32;
+ struct cvmx_usbcx_gintsts_s
+ {
+ uint32_t wkupint : 1; /**< Resume/Remote Wakeup Detected Interrupt (WkUpInt)
+ In Device mode, this interrupt is asserted when a resume is
+ detected on the USB. In Host mode, this interrupt is asserted
+ when a remote wakeup is detected on the USB.
+ For more information on how to use this interrupt, see "Partial
+ Power-Down and Clock Gating Programming Model" on
+ page 353. */
+ uint32_t sessreqint : 1; /**< Session Request/New Session Detected Interrupt (SessReqInt)
+ In Host mode, this interrupt is asserted when a session request
+ is detected from the device. In Device mode, this interrupt is
+ asserted when the utmiotg_bvalid signal goes high.
+ For more information on how to use this interrupt, see "Partial
+ Power-Down and Clock Gating Programming Model" on
+ page 353. */
+ uint32_t disconnint : 1; /**< Disconnect Detected Interrupt (DisconnInt)
+ Asserted when a device disconnect is detected. */
+ uint32_t conidstschng : 1; /**< Connector ID Status Change (ConIDStsChng)
+ The core sets this bit when there is a change in connector ID
+ status. */
+ uint32_t reserved_27_27 : 1;
+ uint32_t ptxfemp : 1; /**< Periodic TxFIFO Empty (PTxFEmp)
+ Asserted when the Periodic Transmit FIFO is either half or
+ completely empty and there is space for at least one entry to be
+ written in the Periodic Request Queue. The half or completely
+ empty status is determined by the Periodic TxFIFO Empty Level
+ bit in the Core AHB Configuration register
+ (GAHBCFG.PTxFEmpLvl). */
+ uint32_t hchint : 1; /**< Host Channels Interrupt (HChInt)
+ The core sets this bit to indicate that an interrupt is pending on
+ one of the channels of the core (in Host mode). The application
+ must read the Host All Channels Interrupt (HAINT) register to
+ determine the exact number of the channel on which the
+ interrupt occurred, and then read the corresponding Host
+ Channel-n Interrupt (HCINTn) register to determine the exact
+ cause of the interrupt. The application must clear the
+ appropriate status bit in the HCINTn register to clear this bit. */
+ uint32_t prtint : 1; /**< Host Port Interrupt (PrtInt)
+ The core sets this bit to indicate a change in port status of one
+ of the O2P USB core ports in Host mode. The application must
+ read the Host Port Control and Status (HPRT) register to
+ determine the exact event that caused this interrupt. The
+ application must clear the appropriate status bit in the Host Port
+ Control and Status register to clear this bit. */
+ uint32_t reserved_23_23 : 1;
+ uint32_t fetsusp : 1; /**< Data Fetch Suspended (FetSusp)
+ This interrupt is valid only in DMA mode. This interrupt indicates
+ that the core has stopped fetching data for IN endpoints due to
+ the unavailability of TxFIFO space or Request Queue space.
+ This interrupt is used by the application for an endpoint
+ mismatch algorithm. */
+ uint32_t incomplp : 1; /**< Incomplete Periodic Transfer (incomplP)
+ In Host mode, the core sets this interrupt bit when there are
+ incomplete periodic transactions still pending which are
+ scheduled for the current microframe.
+ Incomplete Isochronous OUT Transfer (incompISOOUT)
+ The Device mode, the core sets this interrupt to indicate that
+ there is at least one isochronous OUT endpoint on which the
+ transfer is not completed in the current microframe. This
+ interrupt is asserted along with the End of Periodic Frame
+ Interrupt (EOPF) bit in this register. */
+ uint32_t incompisoin : 1; /**< Incomplete Isochronous IN Transfer (incompISOIN)
+ The core sets this interrupt to indicate that there is at least one
+ isochronous IN endpoint on which the transfer is not completed
+ in the current microframe. This interrupt is asserted along with
+ the End of Periodic Frame Interrupt (EOPF) bit in this register. */
+ uint32_t oepint : 1; /**< OUT Endpoints Interrupt (OEPInt)
+ The core sets this bit to indicate that an interrupt is pending on
+ one of the OUT endpoints of the core (in Device mode). The
+ application must read the Device All Endpoints Interrupt
+ (DAINT) register to determine the exact number of the OUT
+ endpoint on which the interrupt occurred, and then read the
+ corresponding Device OUT Endpoint-n Interrupt (DOEPINTn)
+ register to determine the exact cause of the interrupt. The
+ application must clear the appropriate status bit in the
+ corresponding DOEPINTn register to clear this bit. */
+ uint32_t iepint : 1; /**< IN Endpoints Interrupt (IEPInt)
+ The core sets this bit to indicate that an interrupt is pending on
+ one of the IN endpoints of the core (in Device mode). The
+ application must read the Device All Endpoints Interrupt
+ (DAINT) register to determine the exact number of the IN
+ endpoint on which the interrupt occurred, and then read the
+ corresponding Device IN Endpoint-n Interrupt (DIEPINTn)
+ register to determine the exact cause of the interrupt. The
+ application must clear the appropriate status bit in the
+ corresponding DIEPINTn register to clear this bit. */
+ uint32_t epmis : 1; /**< Endpoint Mismatch Interrupt (EPMis)
+ Indicates that an IN token has been received for a non-periodic
+ endpoint, but the data for another endpoint is present in the top
+ of the Non-Periodic Transmit FIFO and the IN endpoint
+ mismatch count programmed by the application has expired. */
+ uint32_t reserved_16_16 : 1;
+ uint32_t eopf : 1; /**< End of Periodic Frame Interrupt (EOPF)
+ Indicates that the period specified in the Periodic Frame Interval
+ field of the Device Configuration register (DCFG.PerFrInt) has
+ been reached in the current microframe. */
+ uint32_t isooutdrop : 1; /**< Isochronous OUT Packet Dropped Interrupt (ISOOutDrop)
+ The core sets this bit when it fails to write an isochronous OUT
+ packet into the RxFIFO because the RxFIFO doesn't have
+ enough space to accommodate a maximum packet size packet
+ for the isochronous OUT endpoint. */
+ uint32_t enumdone : 1; /**< Enumeration Done (EnumDone)
+ The core sets this bit to indicate that speed enumeration is
+ complete. The application must read the Device Status (DSTS)
+ register to obtain the enumerated speed. */
+ uint32_t usbrst : 1; /**< USB Reset (USBRst)
+ The core sets this bit to indicate that a reset is detected on the
+ USB. */
+ uint32_t usbsusp : 1; /**< USB Suspend (USBSusp)
+ The core sets this bit to indicate that a suspend was detected
+ on the USB. The core enters the Suspended state when there
+ is no activity on the phy_line_state_i signal for an extended
+ period of time. */
+ uint32_t erlysusp : 1; /**< Early Suspend (ErlySusp)
+ The core sets this bit to indicate that an Idle state has been
+ detected on the USB for 3 ms. */
+ uint32_t i2cint : 1; /**< I2C Interrupt (I2CINT)
+ This bit is always 0x0. */
+ uint32_t ulpickint : 1; /**< ULPI Carkit Interrupt (ULPICKINT)
+ This bit is always 0x0. */
+ uint32_t goutnakeff : 1; /**< Global OUT NAK Effective (GOUTNakEff)
+ Indicates that the Set Global OUT NAK bit in the Device Control
+ register (DCTL.SGOUTNak), set by the application, has taken
+ effect in the core. This bit can be cleared by writing the Clear
+ Global OUT NAK bit in the Device Control register
+ (DCTL.CGOUTNak). */
+ uint32_t ginnakeff : 1; /**< Global IN Non-Periodic NAK Effective (GINNakEff)
+ Indicates that the Set Global Non-Periodic IN NAK bit in the
+ Device Control register (DCTL.SGNPInNak), set by the
+ application, has taken effect in the core. That is, the core has
+ sampled the Global IN NAK bit set by the application. This bit
+ can be cleared by clearing the Clear Global Non-Periodic IN
+ NAK bit in the Device Control register (DCTL.CGNPInNak).
+ This interrupt does not necessarily mean that a NAK handshake
+ is sent out on the USB. The STALL bit takes precedence over
+ the NAK bit. */
+ uint32_t nptxfemp : 1; /**< Non-Periodic TxFIFO Empty (NPTxFEmp)
+ This interrupt is asserted when the Non-Periodic TxFIFO is
+ either half or completely empty, and there is space for at least
+ one entry to be written to the Non-Periodic Transmit Request
+ Queue. The half or completely empty status is determined by
+ the Non-Periodic TxFIFO Empty Level bit in the Core AHB
+ Configuration register (GAHBCFG.NPTxFEmpLvl). */
+ uint32_t rxflvl : 1; /**< RxFIFO Non-Empty (RxFLvl)
+ Indicates that there is at least one packet pending to be read
+ from the RxFIFO. */
+ uint32_t sof : 1; /**< Start of (micro)Frame (Sof)
+ In Host mode, the core sets this bit to indicate that an SOF
+ (FS), micro-SOF (HS), or Keep-Alive (LS) is transmitted on the
+ USB. The application must write a 1 to this bit to clear the
+ interrupt.
+ In Device mode, in the core sets this bit to indicate that an SOF
+ token has been received on the USB. The application can read
+ the Device Status register to get the current (micro)frame
+ number. This interrupt is seen only when the core is operating
+ at either HS or FS. */
+ uint32_t otgint : 1; /**< OTG Interrupt (OTGInt)
+ The core sets this bit to indicate an OTG protocol event. The
+ application must read the OTG Interrupt Status (GOTGINT)
+ register to determine the exact event that caused this interrupt.
+ The application must clear the appropriate status bit in the
+ GOTGINT register to clear this bit. */
+ uint32_t modemis : 1; /**< Mode Mismatch Interrupt (ModeMis)
+ The core sets this bit when the application is trying to access:
+ * A Host mode register, when the core is operating in Device
+ mode
+ * A Device mode register, when the core is operating in Host
+ mode
+ The register access is completed on the AHB with an OKAY
+ response, but is ignored by the core internally and doesn't
+ affect the operation of the core. */
+ uint32_t curmod : 1; /**< Current Mode of Operation (CurMod)
+ Indicates the current mode of operation.
+ * 1'b0: Device mode
+ * 1'b1: Host mode */
+ } s;
+ struct cvmx_usbcx_gintsts_s cn30xx;
+ struct cvmx_usbcx_gintsts_s cn31xx;
+ struct cvmx_usbcx_gintsts_s cn50xx;
+ struct cvmx_usbcx_gintsts_s cn52xx;
+ struct cvmx_usbcx_gintsts_s cn52xxp1;
+ struct cvmx_usbcx_gintsts_s cn56xx;
+ struct cvmx_usbcx_gintsts_s cn56xxp1;
+};
+typedef union cvmx_usbcx_gintsts cvmx_usbcx_gintsts_t;
+
+/**
+ * cvmx_usbc#_gnptxfsiz
+ *
+ * Non-Periodic Transmit FIFO Size Register (GNPTXFSIZ)
+ *
+ * The application can program the RAM size and the memory start address for the Non-Periodic TxFIFO.
+ */
+union cvmx_usbcx_gnptxfsiz
+{
+ uint32_t u32;
+ struct cvmx_usbcx_gnptxfsiz_s
+ {
+ uint32_t nptxfdep : 16; /**< Non-Periodic TxFIFO Depth (NPTxFDep)
+ This value is in terms of 32-bit words.
+ Minimum value is 16
+ Maximum value is 32768 */
+ uint32_t nptxfstaddr : 16; /**< Non-Periodic Transmit RAM Start Address (NPTxFStAddr)
+ This field contains the memory start address for Non-Periodic
+ Transmit FIFO RAM. */
+ } s;
+ struct cvmx_usbcx_gnptxfsiz_s cn30xx;
+ struct cvmx_usbcx_gnptxfsiz_s cn31xx;
+ struct cvmx_usbcx_gnptxfsiz_s cn50xx;
+ struct cvmx_usbcx_gnptxfsiz_s cn52xx;
+ struct cvmx_usbcx_gnptxfsiz_s cn52xxp1;
+ struct cvmx_usbcx_gnptxfsiz_s cn56xx;
+ struct cvmx_usbcx_gnptxfsiz_s cn56xxp1;
+};
+typedef union cvmx_usbcx_gnptxfsiz cvmx_usbcx_gnptxfsiz_t;
+
+/**
+ * cvmx_usbc#_gnptxsts
+ *
+ * Non-Periodic Transmit FIFO/Queue Status Register (GNPTXSTS)
+ *
+ * This read-only register contains the free space information for the Non-Periodic TxFIFO and
+ * the Non-Periodic Transmit Request Queue
+ */
+union cvmx_usbcx_gnptxsts
+{
+ uint32_t u32;
+ struct cvmx_usbcx_gnptxsts_s
+ {
+ uint32_t reserved_31_31 : 1;
+ uint32_t nptxqtop : 7; /**< Top of the Non-Periodic Transmit Request Queue (NPTxQTop)
+ Entry in the Non-Periodic Tx Request Queue that is currently
+ being processed by the MAC.
+ * Bits [30:27]: Channel/endpoint number
+ * Bits [26:25]:
+ - 2'b00: IN/OUT token
+ - 2'b01: Zero-length transmit packet (device IN/host OUT)
+ - 2'b10: PING/CSPLIT token
+ - 2'b11: Channel halt command
+ * Bit [24]: Terminate (last entry for selected channel/endpoint) */
+ uint32_t nptxqspcavail : 8; /**< Non-Periodic Transmit Request Queue Space Available
+ (NPTxQSpcAvail)
+ Indicates the amount of free space available in the Non-
+ Periodic Transmit Request Queue. This queue holds both IN
+ and OUT requests in Host mode. Device mode has only IN
+ requests.
+ * 8'h0: Non-Periodic Transmit Request Queue is full
+ * 8'h1: 1 location available
+ * 8'h2: 2 locations available
+ * n: n locations available (0..8)
+ * Others: Reserved */
+ uint32_t nptxfspcavail : 16; /**< Non-Periodic TxFIFO Space Avail (NPTxFSpcAvail)
+ Indicates the amount of free space available in the Non-
+ Periodic TxFIFO.
+ Values are in terms of 32-bit words.
+ * 16'h0: Non-Periodic TxFIFO is full
+ * 16'h1: 1 word available
+ * 16'h2: 2 words available
+ * 16'hn: n words available (where 0..32768)
+ * 16'h8000: 32768 words available
+ * Others: Reserved */
+ } s;
+ struct cvmx_usbcx_gnptxsts_s cn30xx;
+ struct cvmx_usbcx_gnptxsts_s cn31xx;
+ struct cvmx_usbcx_gnptxsts_s cn50xx;
+ struct cvmx_usbcx_gnptxsts_s cn52xx;
+ struct cvmx_usbcx_gnptxsts_s cn52xxp1;
+ struct cvmx_usbcx_gnptxsts_s cn56xx;
+ struct cvmx_usbcx_gnptxsts_s cn56xxp1;
+};
+typedef union cvmx_usbcx_gnptxsts cvmx_usbcx_gnptxsts_t;
+
+/**
+ * cvmx_usbc#_gotgctl
+ *
+ * OTG Control and Status Register (GOTGCTL)
+ *
+ * The OTG Control and Status register controls the behavior and reflects the status of the OTG function of the core.:
+ */
+union cvmx_usbcx_gotgctl
+{
+ uint32_t u32;
+ struct cvmx_usbcx_gotgctl_s
+ {
+ uint32_t reserved_20_31 : 12;
+ uint32_t bsesvld : 1; /**< B-Session Valid (BSesVld)
+ Valid only when O2P USB core is configured as a USB device.
+ Indicates the Device mode transceiver status.
+ * 1'b0: B-session is not valid.
+ * 1'b1: B-session is valid. */
+ uint32_t asesvld : 1; /**< A-Session Valid (ASesVld)
+ Valid only when O2P USB core is configured as a USB host.
+ Indicates the Host mode transceiver status.
+ * 1'b0: A-session is not valid
+ * 1'b1: A-session is valid */
+ uint32_t dbnctime : 1; /**< Long/Short Debounce Time (DbncTime)
+ In the present version of the core this bit will only read as '0'. */
+ uint32_t conidsts : 1; /**< Connector ID Status (ConIDSts)
+ Indicates the connector ID status on a connect event.
+ * 1'b0: The O2P USB core is in A-device mode
+ * 1'b1: The O2P USB core is in B-device mode */
+ uint32_t reserved_12_15 : 4;
+ uint32_t devhnpen : 1; /**< Device HNP Enabled (DevHNPEn)
+ Since O2P USB core is not HNP capable this bit is 0x0. */
+ uint32_t hstsethnpen : 1; /**< Host Set HNP Enable (HstSetHNPEn)
+ Since O2P USB core is not HNP capable this bit is 0x0. */
+ uint32_t hnpreq : 1; /**< HNP Request (HNPReq)
+ Since O2P USB core is not HNP capable this bit is 0x0. */
+ uint32_t hstnegscs : 1; /**< Host Negotiation Success (HstNegScs)
+ Since O2P USB core is not HNP capable this bit is 0x0. */
+ uint32_t reserved_2_7 : 6;
+ uint32_t sesreq : 1; /**< Session Request (SesReq)
+ Since O2P USB core is not SRP capable this bit is 0x0. */
+ uint32_t sesreqscs : 1; /**< Session Request Success (SesReqScs)
+ Since O2P USB core is not SRP capable this bit is 0x0. */
+ } s;
+ struct cvmx_usbcx_gotgctl_s cn30xx;
+ struct cvmx_usbcx_gotgctl_s cn31xx;
+ struct cvmx_usbcx_gotgctl_s cn50xx;
+ struct cvmx_usbcx_gotgctl_s cn52xx;
+ struct cvmx_usbcx_gotgctl_s cn52xxp1;
+ struct cvmx_usbcx_gotgctl_s cn56xx;
+ struct cvmx_usbcx_gotgctl_s cn56xxp1;
+};
+typedef union cvmx_usbcx_gotgctl cvmx_usbcx_gotgctl_t;
+
+/**
+ * cvmx_usbc#_gotgint
+ *
+ * OTG Interrupt Register (GOTGINT)
+ *
+ * The application reads this register whenever there is an OTG interrupt and clears the bits in this register
+ * to clear the OTG interrupt. It is shown in Interrupt .:
+ */
+union cvmx_usbcx_gotgint
+{
+ uint32_t u32;
+ struct cvmx_usbcx_gotgint_s
+ {
+ uint32_t reserved_20_31 : 12;
+ uint32_t dbncedone : 1; /**< Debounce Done (DbnceDone)
+ In the present version of the code this bit is tied to '0'. */
+ uint32_t adevtoutchg : 1; /**< A-Device Timeout Change (ADevTOUTChg)
+ Since O2P USB core is not HNP or SRP capable this bit is always 0x0. */
+ uint32_t hstnegdet : 1; /**< Host Negotiation Detected (HstNegDet)
+ Since O2P USB core is not HNP or SRP capable this bit is always 0x0. */
+ uint32_t reserved_10_16 : 7;
+ uint32_t hstnegsucstschng : 1; /**< Host Negotiation Success Status Change (HstNegSucStsChng)
+ Since O2P USB core is not HNP or SRP capable this bit is always 0x0. */
+ uint32_t sesreqsucstschng : 1; /**< Session Request Success Status Change
+ Since O2P USB core is not HNP or SRP capable this bit is always 0x0. */
+ uint32_t reserved_3_7 : 5;
+ uint32_t sesenddet : 1; /**< Session End Detected (SesEndDet)
+ Since O2P USB core is not HNP or SRP capable this bit is always 0x0. */
+ uint32_t reserved_0_1 : 2;
+ } s;
+ struct cvmx_usbcx_gotgint_s cn30xx;
+ struct cvmx_usbcx_gotgint_s cn31xx;
+ struct cvmx_usbcx_gotgint_s cn50xx;
+ struct cvmx_usbcx_gotgint_s cn52xx;
+ struct cvmx_usbcx_gotgint_s cn52xxp1;
+ struct cvmx_usbcx_gotgint_s cn56xx;
+ struct cvmx_usbcx_gotgint_s cn56xxp1;
+};
+typedef union cvmx_usbcx_gotgint cvmx_usbcx_gotgint_t;
+
+/**
+ * cvmx_usbc#_grstctl
+ *
+ * Core Reset Register (GRSTCTL)
+ *
+ * The application uses this register to reset various hardware features inside the core.
+ */
+union cvmx_usbcx_grstctl
+{
+ uint32_t u32;
+ struct cvmx_usbcx_grstctl_s
+ {
+ uint32_t ahbidle : 1; /**< AHB Master Idle (AHBIdle)
+ Indicates that the AHB Master State Machine is in the IDLE
+ condition. */
+ uint32_t dmareq : 1; /**< DMA Request Signal (DMAReq)
+ Indicates that the DMA request is in progress. Used for debug. */
+ uint32_t reserved_11_29 : 19;
+ uint32_t txfnum : 5; /**< TxFIFO Number (TxFNum)
+ This is the FIFO number that must be flushed using the TxFIFO
+ Flush bit. This field must not be changed until the core clears
+ the TxFIFO Flush bit.
+ * 5'h0: Non-Periodic TxFIFO flush
+ * 5'h1: Periodic TxFIFO 1 flush in Device mode or Periodic
+ TxFIFO flush in Host mode
+ * 5'h2: Periodic TxFIFO 2 flush in Device mode
+ - ...
+ * 5'hF: Periodic TxFIFO 15 flush in Device mode
+ * 5'h10: Flush all the Periodic and Non-Periodic TxFIFOs in the
+ core */
+ uint32_t txfflsh : 1; /**< TxFIFO Flush (TxFFlsh)
+ This bit selectively flushes a single or all transmit FIFOs, but
+ cannot do so if the core is in the midst of a transaction.
+ The application must only write this bit after checking that the
+ core is neither writing to the TxFIFO nor reading from the
+ TxFIFO.
+ The application must wait until the core clears this bit before
+ performing any operations. This bit takes 8 clocks (of phy_clk or
+ hclk, whichever is slower) to clear. */
+ uint32_t rxfflsh : 1; /**< RxFIFO Flush (RxFFlsh)
+ The application can flush the entire RxFIFO using this bit, but
+ must first ensure that the core is not in the middle of a
+ transaction.
+ The application must only write to this bit after checking that the
+ core is neither reading from the RxFIFO nor writing to the
+ RxFIFO.
+ The application must wait until the bit is cleared before
+ performing any other operations. This bit will take 8 clocks
+ (slowest of PHY or AHB clock) to clear. */
+ uint32_t intknqflsh : 1; /**< IN Token Sequence Learning Queue Flush (INTknQFlsh)
+ The application writes this bit to flush the IN Token Sequence
+ Learning Queue. */
+ uint32_t frmcntrrst : 1; /**< Host Frame Counter Reset (FrmCntrRst)
+ The application writes this bit to reset the (micro)frame number
+ counter inside the core. When the (micro)frame counter is reset,
+ the subsequent SOF sent out by the core will have a
+ (micro)frame number of 0. */
+ uint32_t hsftrst : 1; /**< HClk Soft Reset (HSftRst)
+ The application uses this bit to flush the control logic in the AHB
+ Clock domain. Only AHB Clock Domain pipelines are reset.
+ * FIFOs are not flushed with this bit.
+ * All state machines in the AHB clock domain are reset to the
+ Idle state after terminating the transactions on the AHB,
+ following the protocol.
+ * CSR control bits used by the AHB clock domain state
+ machines are cleared.
+ * To clear this interrupt, status mask bits that control the
+ interrupt status and are generated by the AHB clock domain
+ state machine are cleared.
+ * Because interrupt status bits are not cleared, the application
+ can get the status of any core events that occurred after it set
+ this bit.
+ This is a self-clearing bit that the core clears after all necessary
+ logic is reset in the core. This may take several clocks,
+ depending on the core's current state. */
+ uint32_t csftrst : 1; /**< Core Soft Reset (CSftRst)
+ Resets the hclk and phy_clock domains as follows:
+ * Clears the interrupts and all the CSR registers except the
+ following register bits:
+ - PCGCCTL.RstPdwnModule
+ - PCGCCTL.GateHclk
+ - PCGCCTL.PwrClmp
+ - PCGCCTL.StopPPhyLPwrClkSelclk
+ - GUSBCFG.PhyLPwrClkSel
+ - GUSBCFG.DDRSel
+ - GUSBCFG.PHYSel
+ - GUSBCFG.FSIntf
+ - GUSBCFG.ULPI_UTMI_Sel
+ - GUSBCFG.PHYIf
+ - HCFG.FSLSPclkSel
+ - DCFG.DevSpd
+ * All module state machines (except the AHB Slave Unit) are
+ reset to the IDLE state, and all the transmit FIFOs and the
+ receive FIFO are flushed.
+ * Any transactions on the AHB Master are terminated as soon
+ as possible, after gracefully completing the last data phase of
+ an AHB transfer. Any transactions on the USB are terminated
+ immediately.
+ The application can write to this bit any time it wants to reset
+ the core. This is a self-clearing bit and the core clears this bit
+ after all the necessary logic is reset in the core, which may take
+ several clocks, depending on the current state of the core.
+ Once this bit is cleared software should wait at least 3 PHY
+ clocks before doing any access to the PHY domain
+ (synchronization delay). Software should also should check that
+ bit 31 of this register is 1 (AHB Master is IDLE) before starting
+ any operation.
+ Typically software reset is used during software development
+ and also when you dynamically change the PHY selection bits
+ in the USB configuration registers listed above. When you
+ change the PHY, the corresponding clock for the PHY is
+ selected and used in the PHY domain. Once a new clock is
+ selected, the PHY domain has to be reset for proper operation. */
+ } s;
+ struct cvmx_usbcx_grstctl_s cn30xx;
+ struct cvmx_usbcx_grstctl_s cn31xx;
+ struct cvmx_usbcx_grstctl_s cn50xx;
+ struct cvmx_usbcx_grstctl_s cn52xx;
+ struct cvmx_usbcx_grstctl_s cn52xxp1;
+ struct cvmx_usbcx_grstctl_s cn56xx;
+ struct cvmx_usbcx_grstctl_s cn56xxp1;
+};
+typedef union cvmx_usbcx_grstctl cvmx_usbcx_grstctl_t;
+
+/**
+ * cvmx_usbc#_grxfsiz
+ *
+ * Receive FIFO Size Register (GRXFSIZ)
+ *
+ * The application can program the RAM size that must be allocated to the RxFIFO.
+ */
+union cvmx_usbcx_grxfsiz
+{
+ uint32_t u32;
+ struct cvmx_usbcx_grxfsiz_s
+ {
+ uint32_t reserved_16_31 : 16;
+ uint32_t rxfdep : 16; /**< RxFIFO Depth (RxFDep)
+ This value is in terms of 32-bit words.
+ * Minimum value is 16
+ * Maximum value is 32768 */
+ } s;
+ struct cvmx_usbcx_grxfsiz_s cn30xx;
+ struct cvmx_usbcx_grxfsiz_s cn31xx;
+ struct cvmx_usbcx_grxfsiz_s cn50xx;
+ struct cvmx_usbcx_grxfsiz_s cn52xx;
+ struct cvmx_usbcx_grxfsiz_s cn52xxp1;
+ struct cvmx_usbcx_grxfsiz_s cn56xx;
+ struct cvmx_usbcx_grxfsiz_s cn56xxp1;
+};
+typedef union cvmx_usbcx_grxfsiz cvmx_usbcx_grxfsiz_t;
+
+/**
+ * cvmx_usbc#_grxstspd
+ *
+ * Receive Status Debug Read Register, Device Mode (GRXSTSPD)
+ *
+ * A read to the Receive Status Read and Pop register returns and additionally pops the top data entry out of the RxFIFO.
+ * This Description is only valid when the core is in Device Mode. For Host Mode use USBC_GRXSTSPH instead.
+ * NOTE: GRXSTSPH and GRXSTSPD are physically the same register and share the same offset in the O2P USB core.
+ * The offset difference shown in this document is for software clarity and is actually ignored by the
+ * hardware.
+ */
+union cvmx_usbcx_grxstspd
+{
+ uint32_t u32;
+ struct cvmx_usbcx_grxstspd_s
+ {
+ uint32_t reserved_25_31 : 7;
+ uint32_t fn : 4; /**< Frame Number (FN)
+ This is the least significant 4 bits of the (micro)frame number in
+ which the packet is received on the USB. This field is supported
+ only when the isochronous OUT endpoints are supported. */
+ uint32_t pktsts : 4; /**< Packet Status (PktSts)
+ Indicates the status of the received packet
+ * 4'b0001: Glogal OUT NAK (triggers an interrupt)
+ * 4'b0010: OUT data packet received
+ * 4'b0100: SETUP transaction completed (triggers an interrupt)
+ * 4'b0110: SETUP data packet received
+ * Others: Reserved */
+ uint32_t dpid : 2; /**< Data PID (DPID)
+ * 2'b00: DATA0
+ * 2'b10: DATA1
+ * 2'b01: DATA2
+ * 2'b11: MDATA */
+ uint32_t bcnt : 11; /**< Byte Count (BCnt)
+ Indicates the byte count of the received data packet */
+ uint32_t epnum : 4; /**< Endpoint Number (EPNum)
+ Indicates the endpoint number to which the current received
+ packet belongs. */
+ } s;
+ struct cvmx_usbcx_grxstspd_s cn30xx;
+ struct cvmx_usbcx_grxstspd_s cn31xx;
+ struct cvmx_usbcx_grxstspd_s cn50xx;
+ struct cvmx_usbcx_grxstspd_s cn52xx;
+ struct cvmx_usbcx_grxstspd_s cn52xxp1;
+ struct cvmx_usbcx_grxstspd_s cn56xx;
+ struct cvmx_usbcx_grxstspd_s cn56xxp1;
+};
+typedef union cvmx_usbcx_grxstspd cvmx_usbcx_grxstspd_t;
+
+/**
+ * cvmx_usbc#_grxstsph
+ *
+ * Receive Status Read and Pop Register, Host Mode (GRXSTSPH)
+ *
+ * A read to the Receive Status Read and Pop register returns and additionally pops the top data entry out of the RxFIFO.
+ * This Description is only valid when the core is in Host Mode. For Device Mode use USBC_GRXSTSPD instead.
+ * NOTE: GRXSTSPH and GRXSTSPD are physically the same register and share the same offset in the O2P USB core.
+ * The offset difference shown in this document is for software clarity and is actually ignored by the
+ * hardware.
+ */
+union cvmx_usbcx_grxstsph
+{
+ uint32_t u32;
+ struct cvmx_usbcx_grxstsph_s
+ {
+ uint32_t reserved_21_31 : 11;
+ uint32_t pktsts : 4; /**< Packet Status (PktSts)
+ Indicates the status of the received packet
+ * 4'b0010: IN data packet received
+ * 4'b0011: IN transfer completed (triggers an interrupt)
+ * 4'b0101: Data toggle error (triggers an interrupt)
+ * 4'b0111: Channel halted (triggers an interrupt)
+ * Others: Reserved */
+ uint32_t dpid : 2; /**< Data PID (DPID)
+ * 2'b00: DATA0
+ * 2'b10: DATA1
+ * 2'b01: DATA2
+ * 2'b11: MDATA */
+ uint32_t bcnt : 11; /**< Byte Count (BCnt)
+ Indicates the byte count of the received IN data packet */
+ uint32_t chnum : 4; /**< Channel Number (ChNum)
+ Indicates the channel number to which the current received
+ packet belongs. */
+ } s;
+ struct cvmx_usbcx_grxstsph_s cn30xx;
+ struct cvmx_usbcx_grxstsph_s cn31xx;
+ struct cvmx_usbcx_grxstsph_s cn50xx;
+ struct cvmx_usbcx_grxstsph_s cn52xx;
+ struct cvmx_usbcx_grxstsph_s cn52xxp1;
+ struct cvmx_usbcx_grxstsph_s cn56xx;
+ struct cvmx_usbcx_grxstsph_s cn56xxp1;
+};
+typedef union cvmx_usbcx_grxstsph cvmx_usbcx_grxstsph_t;
+
+/**
+ * cvmx_usbc#_grxstsrd
+ *
+ * Receive Status Debug Read Register, Device Mode (GRXSTSRD)
+ *
+ * A read to the Receive Status Debug Read register returns the contents of the top of the Receive FIFO.
+ * This Description is only valid when the core is in Device Mode. For Host Mode use USBC_GRXSTSRH instead.
+ * NOTE: GRXSTSRH and GRXSTSRD are physically the same register and share the same offset in the O2P USB core.
+ * The offset difference shown in this document is for software clarity and is actually ignored by the
+ * hardware.
+ */
+union cvmx_usbcx_grxstsrd
+{
+ uint32_t u32;
+ struct cvmx_usbcx_grxstsrd_s
+ {
+ uint32_t reserved_25_31 : 7;
+ uint32_t fn : 4; /**< Frame Number (FN)
+ This is the least significant 4 bits of the (micro)frame number in
+ which the packet is received on the USB. This field is supported
+ only when the isochronous OUT endpoints are supported. */
+ uint32_t pktsts : 4; /**< Packet Status (PktSts)
+ Indicates the status of the received packet
+ * 4'b0001: Glogal OUT NAK (triggers an interrupt)
+ * 4'b0010: OUT data packet received
+ * 4'b0100: SETUP transaction completed (triggers an interrupt)
+ * 4'b0110: SETUP data packet received
+ * Others: Reserved */
+ uint32_t dpid : 2; /**< Data PID (DPID)
+ * 2'b00: DATA0
+ * 2'b10: DATA1
+ * 2'b01: DATA2
+ * 2'b11: MDATA */
+ uint32_t bcnt : 11; /**< Byte Count (BCnt)
+ Indicates the byte count of the received data packet */
+ uint32_t epnum : 4; /**< Endpoint Number (EPNum)
+ Indicates the endpoint number to which the current received
+ packet belongs. */
+ } s;
+ struct cvmx_usbcx_grxstsrd_s cn30xx;
+ struct cvmx_usbcx_grxstsrd_s cn31xx;
+ struct cvmx_usbcx_grxstsrd_s cn50xx;
+ struct cvmx_usbcx_grxstsrd_s cn52xx;
+ struct cvmx_usbcx_grxstsrd_s cn52xxp1;
+ struct cvmx_usbcx_grxstsrd_s cn56xx;
+ struct cvmx_usbcx_grxstsrd_s cn56xxp1;
+};
+typedef union cvmx_usbcx_grxstsrd cvmx_usbcx_grxstsrd_t;
+
+/**
+ * cvmx_usbc#_grxstsrh
+ *
+ * Receive Status Debug Read Register, Host Mode (GRXSTSRH)
+ *
+ * A read to the Receive Status Debug Read register returns the contents of the top of the Receive FIFO.
+ * This Description is only valid when the core is in Host Mode. For Device Mode use USBC_GRXSTSRD instead.
+ * NOTE: GRXSTSRH and GRXSTSRD are physically the same register and share the same offset in the O2P USB core.
+ * The offset difference shown in this document is for software clarity and is actually ignored by the
+ * hardware.
+ */
+union cvmx_usbcx_grxstsrh
+{
+ uint32_t u32;
+ struct cvmx_usbcx_grxstsrh_s
+ {
+ uint32_t reserved_21_31 : 11;
+ uint32_t pktsts : 4; /**< Packet Status (PktSts)
+ Indicates the status of the received packet
+ * 4'b0010: IN data packet received
+ * 4'b0011: IN transfer completed (triggers an interrupt)
+ * 4'b0101: Data toggle error (triggers an interrupt)
+ * 4'b0111: Channel halted (triggers an interrupt)
+ * Others: Reserved */
+ uint32_t dpid : 2; /**< Data PID (DPID)
+ * 2'b00: DATA0
+ * 2'b10: DATA1
+ * 2'b01: DATA2
+ * 2'b11: MDATA */
+ uint32_t bcnt : 11; /**< Byte Count (BCnt)
+ Indicates the byte count of the received IN data packet */
+ uint32_t chnum : 4; /**< Channel Number (ChNum)
+ Indicates the channel number to which the current received
+ packet belongs. */
+ } s;
+ struct cvmx_usbcx_grxstsrh_s cn30xx;
+ struct cvmx_usbcx_grxstsrh_s cn31xx;
+ struct cvmx_usbcx_grxstsrh_s cn50xx;
+ struct cvmx_usbcx_grxstsrh_s cn52xx;
+ struct cvmx_usbcx_grxstsrh_s cn52xxp1;
+ struct cvmx_usbcx_grxstsrh_s cn56xx;
+ struct cvmx_usbcx_grxstsrh_s cn56xxp1;
+};
+typedef union cvmx_usbcx_grxstsrh cvmx_usbcx_grxstsrh_t;
+
+/**
+ * cvmx_usbc#_gsnpsid
+ *
+ * Synopsys ID Register (GSNPSID)
+ *
+ * This is a read-only register that contains the release number of the core being used.
+ */
+union cvmx_usbcx_gsnpsid
+{
+ uint32_t u32;
+ struct cvmx_usbcx_gsnpsid_s
+ {
+ uint32_t synopsysid : 32; /**< 0x4F54\<version\>A, release number of the core being used.
+ 0x4F54220A => pass1.x, 0x4F54240A => pass2.x */
+ } s;
+ struct cvmx_usbcx_gsnpsid_s cn30xx;
+ struct cvmx_usbcx_gsnpsid_s cn31xx;
+ struct cvmx_usbcx_gsnpsid_s cn50xx;
+ struct cvmx_usbcx_gsnpsid_s cn52xx;
+ struct cvmx_usbcx_gsnpsid_s cn52xxp1;
+ struct cvmx_usbcx_gsnpsid_s cn56xx;
+ struct cvmx_usbcx_gsnpsid_s cn56xxp1;
+};
+typedef union cvmx_usbcx_gsnpsid cvmx_usbcx_gsnpsid_t;
+
+/**
+ * cvmx_usbc#_gusbcfg
+ *
+ * Core USB Configuration Register (GUSBCFG)
+ *
+ * This register can be used to configure the core after power-on or a changing to Host mode or Device mode.
+ * It contains USB and USB-PHY related configuration parameters. The application must program this register
+ * before starting any transactions on either the AHB or the USB.
+ * Do not make changes to this register after the initial programming.
+ */
+union cvmx_usbcx_gusbcfg
+{
+ uint32_t u32;
+ struct cvmx_usbcx_gusbcfg_s
+ {
+ uint32_t reserved_17_31 : 15;
+ uint32_t otgi2csel : 1; /**< UTMIFS or I2C Interface Select (OtgI2CSel)
+ This bit is always 0x0. */
+ uint32_t phylpwrclksel : 1; /**< PHY Low-Power Clock Select (PhyLPwrClkSel)
+ Software should set this bit to 0x0.
+ Selects either 480-MHz or 48-MHz (low-power) PHY mode. In
+ FS and LS modes, the PHY can usually operate on a 48-MHz
+ clock to save power.
+ * 1'b0: 480-MHz Internal PLL clock
+ * 1'b1: 48-MHz External Clock
+ In 480 MHz mode, the UTMI interface operates at either 60 or
+ 30-MHz, depending upon whether 8- or 16-bit data width is
+ selected. In 48-MHz mode, the UTMI interface operates at 48
+ MHz in FS mode and at either 48 or 6 MHz in LS mode
+ (depending on the PHY vendor).
+ This bit drives the utmi_fsls_low_power core output signal, and
+ is valid only for UTMI+ PHYs. */
+ uint32_t reserved_14_14 : 1;
+ uint32_t usbtrdtim : 4; /**< USB Turnaround Time (USBTrdTim)
+ Sets the turnaround time in PHY clocks.
+ Specifies the response time for a MAC request to the Packet
+ FIFO Controller (PFC) to fetch data from the DFIFO (SPRAM).
+ This must be programmed to 0x5. */
+ uint32_t hnpcap : 1; /**< HNP-Capable (HNPCap)
+ This bit is always 0x0. */
+ uint32_t srpcap : 1; /**< SRP-Capable (SRPCap)
+ This bit is always 0x0. */
+ uint32_t ddrsel : 1; /**< ULPI DDR Select (DDRSel)
+ Software should set this bit to 0x0. */
+ uint32_t physel : 1; /**< USB 2.0 High-Speed PHY or USB 1.1 Full-Speed Serial
+ Software should set this bit to 0x0. */
+ uint32_t fsintf : 1; /**< Full-Speed Serial Interface Select (FSIntf)
+ Software should set this bit to 0x0. */
+ uint32_t ulpi_utmi_sel : 1; /**< ULPI or UTMI+ Select (ULPI_UTMI_Sel)
+ This bit is always 0x0. */
+ uint32_t phyif : 1; /**< PHY Interface (PHYIf)
+ This bit is always 0x1. */
+ uint32_t toutcal : 3; /**< HS/FS Timeout Calibration (TOutCal)
+ The number of PHY clocks that the application programs in this
+ field is added to the high-speed/full-speed interpacket timeout
+ duration in the core to account for any additional delays
+ introduced by the PHY. This may be required, since the delay
+ introduced by the PHY in generating the linestate condition may
+ vary from one PHY to another.
+ The USB standard timeout value for high-speed operation is
+ 736 to 816 (inclusive) bit times. The USB standard timeout
+ value for full-speed operation is 16 to 18 (inclusive) bit times.
+ The application must program this field based on the speed of
+ enumeration. The number of bit times added per PHY clock are:
+ High-speed operation:
+ * One 30-MHz PHY clock = 16 bit times
+ * One 60-MHz PHY clock = 8 bit times
+ Full-speed operation:
+ * One 30-MHz PHY clock = 0.4 bit times
+ * One 60-MHz PHY clock = 0.2 bit times
+ * One 48-MHz PHY clock = 0.25 bit times */
+ } s;
+ struct cvmx_usbcx_gusbcfg_s cn30xx;
+ struct cvmx_usbcx_gusbcfg_s cn31xx;
+ struct cvmx_usbcx_gusbcfg_s cn50xx;
+ struct cvmx_usbcx_gusbcfg_s cn52xx;
+ struct cvmx_usbcx_gusbcfg_s cn52xxp1;
+ struct cvmx_usbcx_gusbcfg_s cn56xx;
+ struct cvmx_usbcx_gusbcfg_s cn56xxp1;
+};
+typedef union cvmx_usbcx_gusbcfg cvmx_usbcx_gusbcfg_t;
+
+/**
+ * cvmx_usbc#_haint
+ *
+ * Host All Channels Interrupt Register (HAINT)
+ *
+ * When a significant event occurs on a channel, the Host All Channels Interrupt register
+ * interrupts the application using the Host Channels Interrupt bit of the Core Interrupt
+ * register (GINTSTS.HChInt). This is shown in Interrupt . There is one interrupt bit per
+ * channel, up to a maximum of 16 bits. Bits in this register are set and cleared when the
+ * application sets and clears bits in the corresponding Host Channel-n Interrupt register.
+ */
+union cvmx_usbcx_haint
+{
+ uint32_t u32;
+ struct cvmx_usbcx_haint_s
+ {
+ uint32_t reserved_16_31 : 16;
+ uint32_t haint : 16; /**< Channel Interrupts (HAINT)
+ One bit per channel: Bit 0 for Channel 0, bit 15 for Channel 15 */
+ } s;
+ struct cvmx_usbcx_haint_s cn30xx;
+ struct cvmx_usbcx_haint_s cn31xx;
+ struct cvmx_usbcx_haint_s cn50xx;
+ struct cvmx_usbcx_haint_s cn52xx;
+ struct cvmx_usbcx_haint_s cn52xxp1;
+ struct cvmx_usbcx_haint_s cn56xx;
+ struct cvmx_usbcx_haint_s cn56xxp1;
+};
+typedef union cvmx_usbcx_haint cvmx_usbcx_haint_t;
+
+/**
+ * cvmx_usbc#_haintmsk
+ *
+ * Host All Channels Interrupt Mask Register (HAINTMSK)
+ *
+ * The Host All Channel Interrupt Mask register works with the Host All Channel Interrupt
+ * register to interrupt the application when an event occurs on a channel. There is one
+ * interrupt mask bit per channel, up to a maximum of 16 bits.
+ * Mask interrupt: 1'b0 Unmask interrupt: 1'b1
+ */
+union cvmx_usbcx_haintmsk
+{
+ uint32_t u32;
+ struct cvmx_usbcx_haintmsk_s
+ {
+ uint32_t reserved_16_31 : 16;
+ uint32_t haintmsk : 16; /**< Channel Interrupt Mask (HAINTMsk)
+ One bit per channel: Bit 0 for channel 0, bit 15 for channel 15 */
+ } s;
+ struct cvmx_usbcx_haintmsk_s cn30xx;
+ struct cvmx_usbcx_haintmsk_s cn31xx;
+ struct cvmx_usbcx_haintmsk_s cn50xx;
+ struct cvmx_usbcx_haintmsk_s cn52xx;
+ struct cvmx_usbcx_haintmsk_s cn52xxp1;
+ struct cvmx_usbcx_haintmsk_s cn56xx;
+ struct cvmx_usbcx_haintmsk_s cn56xxp1;
+};
+typedef union cvmx_usbcx_haintmsk cvmx_usbcx_haintmsk_t;
+
+/**
+ * cvmx_usbc#_hcchar#
+ *
+ * Host Channel-n Characteristics Register (HCCHAR)
+ *
+ */
+union cvmx_usbcx_hccharx
+{
+ uint32_t u32;
+ struct cvmx_usbcx_hccharx_s
+ {
+ uint32_t chena : 1; /**< Channel Enable (ChEna)
+ This field is set by the application and cleared by the OTG host.
+ * 1'b0: Channel disabled
+ * 1'b1: Channel enabled */
+ uint32_t chdis : 1; /**< Channel Disable (ChDis)
+ The application sets this bit to stop transmitting/receiving data
+ on a channel, even before the transfer for that channel is
+ complete. The application must wait for the Channel Disabled
+ interrupt before treating the channel as disabled. */
+ uint32_t oddfrm : 1; /**< Odd Frame (OddFrm)
+ This field is set (reset) by the application to indicate that the
+ OTG host must perform a transfer in an odd (micro)frame. This
+ field is applicable for only periodic (isochronous and interrupt)
+ transactions.
+ * 1'b0: Even (micro)frame
+ * 1'b1: Odd (micro)frame */
+ uint32_t devaddr : 7; /**< Device Address (DevAddr)
+ This field selects the specific device serving as the data source
+ or sink. */
+ uint32_t ec : 2; /**< Multi Count (MC) / Error Count (EC)
+ When the Split Enable bit of the Host Channel-n Split Control
+ register (HCSPLTn.SpltEna) is reset (1'b0), this field indicates
+ to the host the number of transactions that should be executed
+ per microframe for this endpoint.
+ * 2'b00: Reserved. This field yields undefined results.
+ * 2'b01: 1 transaction
+ * 2'b10: 2 transactions to be issued for this endpoint per
+ microframe
+ * 2'b11: 3 transactions to be issued for this endpoint per
+ microframe
+ When HCSPLTn.SpltEna is set (1'b1), this field indicates the
+ number of immediate retries to be performed for a periodic split
+ transactions on transaction errors. This field must be set to at
+ least 2'b01. */
+ uint32_t eptype : 2; /**< Endpoint Type (EPType)
+ Indicates the transfer type selected.
+ * 2'b00: Control
+ * 2'b01: Isochronous
+ * 2'b10: Bulk
+ * 2'b11: Interrupt */
+ uint32_t lspddev : 1; /**< Low-Speed Device (LSpdDev)
+ This field is set by the application to indicate that this channel is
+ communicating to a low-speed device. */
+ uint32_t reserved_16_16 : 1;
+ uint32_t epdir : 1; /**< Endpoint Direction (EPDir)
+ Indicates whether the transaction is IN or OUT.
+ * 1'b0: OUT
+ * 1'b1: IN */
+ uint32_t epnum : 4; /**< Endpoint Number (EPNum)
+ Indicates the endpoint number on the device serving as the
+ data source or sink. */
+ uint32_t mps : 11; /**< Maximum Packet Size (MPS)
+ Indicates the maximum packet size of the associated endpoint. */
+ } s;
+ struct cvmx_usbcx_hccharx_s cn30xx;
+ struct cvmx_usbcx_hccharx_s cn31xx;
+ struct cvmx_usbcx_hccharx_s cn50xx;
+ struct cvmx_usbcx_hccharx_s cn52xx;
+ struct cvmx_usbcx_hccharx_s cn52xxp1;
+ struct cvmx_usbcx_hccharx_s cn56xx;
+ struct cvmx_usbcx_hccharx_s cn56xxp1;
+};
+typedef union cvmx_usbcx_hccharx cvmx_usbcx_hccharx_t;
+
+/**
+ * cvmx_usbc#_hcfg
+ *
+ * Host Configuration Register (HCFG)
+ *
+ * This register configures the core after power-on. Do not make changes to this register after initializing the host.
+ */
+union cvmx_usbcx_hcfg
+{
+ uint32_t u32;
+ struct cvmx_usbcx_hcfg_s
+ {
+ uint32_t reserved_3_31 : 29;
+ uint32_t fslssupp : 1; /**< FS- and LS-Only Support (FSLSSupp)
+ The application uses this bit to control the core's enumeration
+ speed. Using this bit, the application can make the core
+ enumerate as a FS host, even if the connected device supports
+ HS traffic. Do not make changes to this field after initial
+ programming.
+ * 1'b0: HS/FS/LS, based on the maximum speed supported by
+ the connected device
+ * 1'b1: FS/LS-only, even if the connected device can support HS */
+ uint32_t fslspclksel : 2; /**< FS/LS PHY Clock Select (FSLSPclkSel)
+ When the core is in FS Host mode
+ * 2'b00: PHY clock is running at 30/60 MHz
+ * 2'b01: PHY clock is running at 48 MHz
+ * Others: Reserved
+ When the core is in LS Host mode
+ * 2'b00: PHY clock is running at 30/60 MHz. When the
+ UTMI+/ULPI PHY Low Power mode is not selected, use
+ 30/60 MHz.
+ * 2'b01: PHY clock is running at 48 MHz. When the UTMI+
+ PHY Low Power mode is selected, use 48MHz if the PHY
+ supplies a 48 MHz clock during LS mode.
+ * 2'b10: PHY clock is running at 6 MHz. In USB 1.1 FS mode,
+ use 6 MHz when the UTMI+ PHY Low Power mode is
+ selected and the PHY supplies a 6 MHz clock during LS
+ mode. If you select a 6 MHz clock during LS mode, you must
+ do a soft reset.
+ * 2'b11: Reserved */
+ } s;
+ struct cvmx_usbcx_hcfg_s cn30xx;
+ struct cvmx_usbcx_hcfg_s cn31xx;
+ struct cvmx_usbcx_hcfg_s cn50xx;
+ struct cvmx_usbcx_hcfg_s cn52xx;
+ struct cvmx_usbcx_hcfg_s cn52xxp1;
+ struct cvmx_usbcx_hcfg_s cn56xx;
+ struct cvmx_usbcx_hcfg_s cn56xxp1;
+};
+typedef union cvmx_usbcx_hcfg cvmx_usbcx_hcfg_t;
+
+/**
+ * cvmx_usbc#_hcint#
+ *
+ * Host Channel-n Interrupt Register (HCINT)
+ *
+ * This register indicates the status of a channel with respect to USB- and AHB-related events.
+ * The application must read this register when the Host Channels Interrupt bit of the Core Interrupt
+ * register (GINTSTS.HChInt) is set. Before the application can read this register, it must first read
+ * the Host All Channels Interrupt (HAINT) register to get the exact channel number for the Host Channel-n
+ * Interrupt register. The application must clear the appropriate bit in this register to clear the
+ * corresponding bits in the HAINT and GINTSTS registers.
+ */
+union cvmx_usbcx_hcintx
+{
+ uint32_t u32;
+ struct cvmx_usbcx_hcintx_s
+ {
+ uint32_t reserved_11_31 : 21;
+ uint32_t datatglerr : 1; /**< Data Toggle Error (DataTglErr) */
+ uint32_t frmovrun : 1; /**< Frame Overrun (FrmOvrun) */
+ uint32_t bblerr : 1; /**< Babble Error (BblErr) */
+ uint32_t xacterr : 1; /**< Transaction Error (XactErr) */
+ uint32_t nyet : 1; /**< NYET Response Received Interrupt (NYET) */
+ uint32_t ack : 1; /**< ACK Response Received Interrupt (ACK) */
+ uint32_t nak : 1; /**< NAK Response Received Interrupt (NAK) */
+ uint32_t stall : 1; /**< STALL Response Received Interrupt (STALL) */
+ uint32_t ahberr : 1; /**< This bit is always 0x0. */
+ uint32_t chhltd : 1; /**< Channel Halted (ChHltd)
+ Indicates the transfer completed abnormally either because of
+ any USB transaction error or in response to disable request by
+ the application. */
+ uint32_t xfercompl : 1; /**< Transfer Completed (XferCompl)
+ Transfer completed normally without any errors. */
+ } s;
+ struct cvmx_usbcx_hcintx_s cn30xx;
+ struct cvmx_usbcx_hcintx_s cn31xx;
+ struct cvmx_usbcx_hcintx_s cn50xx;
+ struct cvmx_usbcx_hcintx_s cn52xx;
+ struct cvmx_usbcx_hcintx_s cn52xxp1;
+ struct cvmx_usbcx_hcintx_s cn56xx;
+ struct cvmx_usbcx_hcintx_s cn56xxp1;
+};
+typedef union cvmx_usbcx_hcintx cvmx_usbcx_hcintx_t;
+
+/**
+ * cvmx_usbc#_hcintmsk#
+ *
+ * Host Channel-n Interrupt Mask Register (HCINTMSKn)
+ *
+ * This register reflects the mask for each channel status described in the previous section.
+ * Mask interrupt: 1'b0 Unmask interrupt: 1'b1
+ */
+union cvmx_usbcx_hcintmskx
+{
+ uint32_t u32;
+ struct cvmx_usbcx_hcintmskx_s
+ {
+ uint32_t reserved_11_31 : 21;
+ uint32_t datatglerrmsk : 1; /**< Data Toggle Error Mask (DataTglErrMsk) */
+ uint32_t frmovrunmsk : 1; /**< Frame Overrun Mask (FrmOvrunMsk) */
+ uint32_t bblerrmsk : 1; /**< Babble Error Mask (BblErrMsk) */
+ uint32_t xacterrmsk : 1; /**< Transaction Error Mask (XactErrMsk) */
+ uint32_t nyetmsk : 1; /**< NYET Response Received Interrupt Mask (NyetMsk) */
+ uint32_t ackmsk : 1; /**< ACK Response Received Interrupt Mask (AckMsk) */
+ uint32_t nakmsk : 1; /**< NAK Response Received Interrupt Mask (NakMsk) */
+ uint32_t stallmsk : 1; /**< STALL Response Received Interrupt Mask (StallMsk) */
+ uint32_t ahberrmsk : 1; /**< AHB Error Mask (AHBErrMsk) */
+ uint32_t chhltdmsk : 1; /**< Channel Halted Mask (ChHltdMsk) */
+ uint32_t xfercomplmsk : 1; /**< Transfer Completed Mask (XferComplMsk) */
+ } s;
+ struct cvmx_usbcx_hcintmskx_s cn30xx;
+ struct cvmx_usbcx_hcintmskx_s cn31xx;
+ struct cvmx_usbcx_hcintmskx_s cn50xx;
+ struct cvmx_usbcx_hcintmskx_s cn52xx;
+ struct cvmx_usbcx_hcintmskx_s cn52xxp1;
+ struct cvmx_usbcx_hcintmskx_s cn56xx;
+ struct cvmx_usbcx_hcintmskx_s cn56xxp1;
+};
+typedef union cvmx_usbcx_hcintmskx cvmx_usbcx_hcintmskx_t;
+
+/**
+ * cvmx_usbc#_hcsplt#
+ *
+ * Host Channel-n Split Control Register (HCSPLT)
+ *
+ */
+union cvmx_usbcx_hcspltx
+{
+ uint32_t u32;
+ struct cvmx_usbcx_hcspltx_s
+ {
+ uint32_t spltena : 1; /**< Split Enable (SpltEna)
+ The application sets this field to indicate that this channel is
+ enabled to perform split transactions. */
+ uint32_t reserved_17_30 : 14;
+ uint32_t compsplt : 1; /**< Do Complete Split (CompSplt)
+ The application sets this field to request the OTG host to
+ perform a complete split transaction. */
+ uint32_t xactpos : 2; /**< Transaction Position (XactPos)
+ This field is used to determine whether to send all, first, middle,
+ or last payloads with each OUT transaction.
+ * 2'b11: All. This is the entire data payload is of this transaction
+ (which is less than or equal to 188 bytes).
+ * 2'b10: Begin. This is the first data payload of this transaction
+ (which is larger than 188 bytes).
+ * 2'b00: Mid. This is the middle payload of this transaction
+ (which is larger than 188 bytes).
+ * 2'b01: End. This is the last payload of this transaction (which
+ is larger than 188 bytes). */
+ uint32_t hubaddr : 7; /**< Hub Address (HubAddr)
+ This field holds the device address of the transaction
+ translator's hub. */
+ uint32_t prtaddr : 7; /**< Port Address (PrtAddr)
+ This field is the port number of the recipient transaction
+ translator. */
+ } s;
+ struct cvmx_usbcx_hcspltx_s cn30xx;
+ struct cvmx_usbcx_hcspltx_s cn31xx;
+ struct cvmx_usbcx_hcspltx_s cn50xx;
+ struct cvmx_usbcx_hcspltx_s cn52xx;
+ struct cvmx_usbcx_hcspltx_s cn52xxp1;
+ struct cvmx_usbcx_hcspltx_s cn56xx;
+ struct cvmx_usbcx_hcspltx_s cn56xxp1;
+};
+typedef union cvmx_usbcx_hcspltx cvmx_usbcx_hcspltx_t;
+
+/**
+ * cvmx_usbc#_hctsiz#
+ *
+ * Host Channel-n Transfer Size Register (HCTSIZ)
+ *
+ */
+union cvmx_usbcx_hctsizx
+{
+ uint32_t u32;
+ struct cvmx_usbcx_hctsizx_s
+ {
+ uint32_t dopng : 1; /**< Do Ping (DoPng)
+ Setting this field to 1 directs the host to do PING protocol. */
+ uint32_t pid : 2; /**< PID (Pid)
+ The application programs this field with the type of PID to use
+ for the initial transaction. The host will maintain this field for the
+ rest of the transfer.
+ * 2'b00: DATA0
+ * 2'b01: DATA2
+ * 2'b10: DATA1
+ * 2'b11: MDATA (non-control)/SETUP (control) */
+ uint32_t pktcnt : 10; /**< Packet Count (PktCnt)
+ This field is programmed by the application with the expected
+ number of packets to be transmitted (OUT) or received (IN).
+ The host decrements this count on every successful
+ transmission or reception of an OUT/IN packet. Once this count
+ reaches zero, the application is interrupted to indicate normal
+ completion. */
+ uint32_t xfersize : 19; /**< Transfer Size (XferSize)
+ For an OUT, this field is the number of data bytes the host will
+ send during the transfer.
+ For an IN, this field is the buffer size that the application has
+ reserved for the transfer. The application is expected to
+ program this field as an integer multiple of the maximum packet
+ size for IN transactions (periodic and non-periodic). */
+ } s;
+ struct cvmx_usbcx_hctsizx_s cn30xx;
+ struct cvmx_usbcx_hctsizx_s cn31xx;
+ struct cvmx_usbcx_hctsizx_s cn50xx;
+ struct cvmx_usbcx_hctsizx_s cn52xx;
+ struct cvmx_usbcx_hctsizx_s cn52xxp1;
+ struct cvmx_usbcx_hctsizx_s cn56xx;
+ struct cvmx_usbcx_hctsizx_s cn56xxp1;
+};
+typedef union cvmx_usbcx_hctsizx cvmx_usbcx_hctsizx_t;
+
+/**
+ * cvmx_usbc#_hfir
+ *
+ * Host Frame Interval Register (HFIR)
+ *
+ * This register stores the frame interval information for the current speed to which the O2P USB core has enumerated.
+ */
+union cvmx_usbcx_hfir
+{
+ uint32_t u32;
+ struct cvmx_usbcx_hfir_s
+ {
+ uint32_t reserved_16_31 : 16;
+ uint32_t frint : 16; /**< Frame Interval (FrInt)
+ The value that the application programs to this field specifies
+ the interval between two consecutive SOFs (FS) or micro-
+ SOFs (HS) or Keep-Alive tokens (HS). This field contains the
+ number of PHY clocks that constitute the required frame
+ interval. The default value set in this field for a FS operation
+ when the PHY clock frequency is 60 MHz. The application can
+ write a value to this register only after the Port Enable bit of
+ the Host Port Control and Status register (HPRT.PrtEnaPort)
+ has been set. If no value is programmed, the core calculates
+ the value based on the PHY clock specified in the FS/LS PHY
+ Clock Select field of the Host Configuration register
+ (HCFG.FSLSPclkSel). Do not change the value of this field
+ after the initial configuration.
+ * 125 us (PHY clock frequency for HS)
+ * 1 ms (PHY clock frequency for FS/LS) */
+ } s;
+ struct cvmx_usbcx_hfir_s cn30xx;
+ struct cvmx_usbcx_hfir_s cn31xx;
+ struct cvmx_usbcx_hfir_s cn50xx;
+ struct cvmx_usbcx_hfir_s cn52xx;
+ struct cvmx_usbcx_hfir_s cn52xxp1;
+ struct cvmx_usbcx_hfir_s cn56xx;
+ struct cvmx_usbcx_hfir_s cn56xxp1;
+};
+typedef union cvmx_usbcx_hfir cvmx_usbcx_hfir_t;
+
+/**
+ * cvmx_usbc#_hfnum
+ *
+ * Host Frame Number/Frame Time Remaining Register (HFNUM)
+ *
+ * This register indicates the current frame number.
+ * It also indicates the time remaining (in terms of the number of PHY clocks)
+ * in the current (micro)frame.
+ */
+union cvmx_usbcx_hfnum
+{
+ uint32_t u32;
+ struct cvmx_usbcx_hfnum_s
+ {
+ uint32_t frrem : 16; /**< Frame Time Remaining (FrRem)
+ Indicates the amount of time remaining in the current
+ microframe (HS) or frame (FS/LS), in terms of PHY clocks.
+ This field decrements on each PHY clock. When it reaches
+ zero, this field is reloaded with the value in the Frame Interval
+ register and a new SOF is transmitted on the USB. */
+ uint32_t frnum : 16; /**< Frame Number (FrNum)
+ This field increments when a new SOF is transmitted on the
+ USB, and is reset to 0 when it reaches 16'h3FFF. */
+ } s;
+ struct cvmx_usbcx_hfnum_s cn30xx;
+ struct cvmx_usbcx_hfnum_s cn31xx;
+ struct cvmx_usbcx_hfnum_s cn50xx;
+ struct cvmx_usbcx_hfnum_s cn52xx;
+ struct cvmx_usbcx_hfnum_s cn52xxp1;
+ struct cvmx_usbcx_hfnum_s cn56xx;
+ struct cvmx_usbcx_hfnum_s cn56xxp1;
+};
+typedef union cvmx_usbcx_hfnum cvmx_usbcx_hfnum_t;
+
+/**
+ * cvmx_usbc#_hprt
+ *
+ * Host Port Control and Status Register (HPRT)
+ *
+ * This register is available in both Host and Device modes.
+ * Currently, the OTG Host supports only one port.
+ * A single register holds USB port-related information such as USB reset, enable, suspend, resume,
+ * connect status, and test mode for each port. The R_SS_WC bits in this register can trigger an
+ * interrupt to the application through the Host Port Interrupt bit of the Core Interrupt
+ * register (GINTSTS.PrtInt). On a Port Interrupt, the application must read this register and clear
+ * the bit that caused the interrupt. For the R_SS_WC bits, the application must write a 1 to the bit
+ * to clear the interrupt.
+ */
+union cvmx_usbcx_hprt
+{
+ uint32_t u32;
+ struct cvmx_usbcx_hprt_s
+ {
+ uint32_t reserved_19_31 : 13;
+ uint32_t prtspd : 2; /**< Port Speed (PrtSpd)
+ Indicates the speed of the device attached to this port.
+ * 2'b00: High speed
+ * 2'b01: Full speed
+ * 2'b10: Low speed
+ * 2'b11: Reserved */
+ uint32_t prttstctl : 4; /**< Port Test Control (PrtTstCtl)
+ The application writes a nonzero value to this field to put
+ the port into a Test mode, and the corresponding pattern is
+ signaled on the port.
+ * 4'b0000: Test mode disabled
+ * 4'b0001: Test_J mode
+ * 4'b0010: Test_K mode
+ * 4'b0011: Test_SE0_NAK mode
+ * 4'b0100: Test_Packet mode
+ * 4'b0101: Test_Force_Enable
+ * Others: Reserved
+ PrtSpd must be zero (i.e. the interface must be in high-speed
+ mode) to use the PrtTstCtl test modes. */
+ uint32_t prtpwr : 1; /**< Port Power (PrtPwr)
+ The application uses this field to control power to this port,
+ and the core clears this bit on an overcurrent condition.
+ * 1'b0: Power off
+ * 1'b1: Power on */
+ uint32_t prtlnsts : 2; /**< Port Line Status (PrtLnSts)
+ Indicates the current logic level USB data lines
+ * Bit [10]: Logic level of D-
+ * Bit [11]: Logic level of D+ */
+ uint32_t reserved_9_9 : 1;
+ uint32_t prtrst : 1; /**< Port Reset (PrtRst)
+ When the application sets this bit, a reset sequence is
+ started on this port. The application must time the reset
+ period and clear this bit after the reset sequence is
+ complete.
+ * 1'b0: Port not in reset
+ * 1'b1: Port in reset
+ The application must leave this bit set for at least a
+ minimum duration mentioned below to start a reset on the
+ port. The application can leave it set for another 10 ms in
+ addition to the required minimum duration, before clearing
+ the bit, even though there is no maximum limit set by the
+ USB standard.
+ * High speed: 50 ms
+ * Full speed/Low speed: 10 ms */
+ uint32_t prtsusp : 1; /**< Port Suspend (PrtSusp)
+ The application sets this bit to put this port in Suspend
+ mode. The core only stops sending SOFs when this is set.
+ To stop the PHY clock, the application must set the Port
+ Clock Stop bit, which will assert the suspend input pin of
+ the PHY.
+ The read value of this bit reflects the current suspend
+ status of the port. This bit is cleared by the core after a
+ remote wakeup signal is detected or the application sets
+ the Port Reset bit or Port Resume bit in this register or the
+ Resume/Remote Wakeup Detected Interrupt bit or
+ Disconnect Detected Interrupt bit in the Core Interrupt
+ register (GINTSTS.WkUpInt or GINTSTS.DisconnInt,
+ respectively).
+ * 1'b0: Port not in Suspend mode
+ * 1'b1: Port in Suspend mode */
+ uint32_t prtres : 1; /**< Port Resume (PrtRes)
+ The application sets this bit to drive resume signaling on
+ the port. The core continues to drive the resume signal
+ until the application clears this bit.
+ If the core detects a USB remote wakeup sequence, as
+ indicated by the Port Resume/Remote Wakeup Detected
+ Interrupt bit of the Core Interrupt register
+ (GINTSTS.WkUpInt), the core starts driving resume
+ signaling without application intervention and clears this bit
+ when it detects a disconnect condition. The read value of
+ this bit indicates whether the core is currently driving
+ resume signaling.
+ * 1'b0: No resume driven
+ * 1'b1: Resume driven */
+ uint32_t prtovrcurrchng : 1; /**< Port Overcurrent Change (PrtOvrCurrChng)
+ The core sets this bit when the status of the Port
+ Overcurrent Active bit (bit 4) in this register changes. */
+ uint32_t prtovrcurract : 1; /**< Port Overcurrent Active (PrtOvrCurrAct)
+ Indicates the overcurrent condition of the port.
+ * 1'b0: No overcurrent condition
+ * 1'b1: Overcurrent condition */
+ uint32_t prtenchng : 1; /**< Port Enable/Disable Change (PrtEnChng)
+ The core sets this bit when the status of the Port Enable bit
+ [2] of this register changes. */
+ uint32_t prtena : 1; /**< Port Enable (PrtEna)
+ A port is enabled only by the core after a reset sequence,
+ and is disabled by an overcurrent condition, a disconnect
+ condition, or by the application clearing this bit. The
+ application cannot set this bit by a register write. It can only
+ clear it to disable the port. This bit does not trigger any
+ interrupt to the application.
+ * 1'b0: Port disabled
+ * 1'b1: Port enabled */
+ uint32_t prtconndet : 1; /**< Port Connect Detected (PrtConnDet)
+ The core sets this bit when a device connection is detected
+ to trigger an interrupt to the application using the Host Port
+ Interrupt bit of the Core Interrupt register (GINTSTS.PrtInt).
+ The application must write a 1 to this bit to clear the
+ interrupt. */
+ uint32_t prtconnsts : 1; /**< Port Connect Status (PrtConnSts)
+ * 0: No device is attached to the port.
+ * 1: A device is attached to the port. */
+ } s;
+ struct cvmx_usbcx_hprt_s cn30xx;
+ struct cvmx_usbcx_hprt_s cn31xx;
+ struct cvmx_usbcx_hprt_s cn50xx;
+ struct cvmx_usbcx_hprt_s cn52xx;
+ struct cvmx_usbcx_hprt_s cn52xxp1;
+ struct cvmx_usbcx_hprt_s cn56xx;
+ struct cvmx_usbcx_hprt_s cn56xxp1;
+};
+typedef union cvmx_usbcx_hprt cvmx_usbcx_hprt_t;
+
+/**
+ * cvmx_usbc#_hptxfsiz
+ *
+ * Host Periodic Transmit FIFO Size Register (HPTXFSIZ)
+ *
+ * This register holds the size and the memory start address of the Periodic TxFIFO, as shown in Figures 310 and 311.
+ */
+union cvmx_usbcx_hptxfsiz
+{
+ uint32_t u32;
+ struct cvmx_usbcx_hptxfsiz_s
+ {
+ uint32_t ptxfsize : 16; /**< Host Periodic TxFIFO Depth (PTxFSize)
+ This value is in terms of 32-bit words.
+ * Minimum value is 16
+ * Maximum value is 32768 */
+ uint32_t ptxfstaddr : 16; /**< Host Periodic TxFIFO Start Address (PTxFStAddr) */
+ } s;
+ struct cvmx_usbcx_hptxfsiz_s cn30xx;
+ struct cvmx_usbcx_hptxfsiz_s cn31xx;
+ struct cvmx_usbcx_hptxfsiz_s cn50xx;
+ struct cvmx_usbcx_hptxfsiz_s cn52xx;
+ struct cvmx_usbcx_hptxfsiz_s cn52xxp1;
+ struct cvmx_usbcx_hptxfsiz_s cn56xx;
+ struct cvmx_usbcx_hptxfsiz_s cn56xxp1;
+};
+typedef union cvmx_usbcx_hptxfsiz cvmx_usbcx_hptxfsiz_t;
+
+/**
+ * cvmx_usbc#_hptxsts
+ *
+ * Host Periodic Transmit FIFO/Queue Status Register (HPTXSTS)
+ *
+ * This read-only register contains the free space information for the Periodic TxFIFO and
+ * the Periodic Transmit Request Queue
+ */
+union cvmx_usbcx_hptxsts
+{
+ uint32_t u32;
+ struct cvmx_usbcx_hptxsts_s
+ {
+ uint32_t ptxqtop : 8; /**< Top of the Periodic Transmit Request Queue (PTxQTop)
+ This indicates the entry in the Periodic Tx Request Queue that
+ is currently being processes by the MAC.
+ This register is used for debugging.
+ * Bit [31]: Odd/Even (micro)frame
+ - 1'b0: send in even (micro)frame
+ - 1'b1: send in odd (micro)frame
+ * Bits [30:27]: Channel/endpoint number
+ * Bits [26:25]: Type
+ - 2'b00: IN/OUT
+ - 2'b01: Zero-length packet
+ - 2'b10: CSPLIT
+ - 2'b11: Disable channel command
+ * Bit [24]: Terminate (last entry for the selected
+ channel/endpoint) */
+ uint32_t ptxqspcavail : 8; /**< Periodic Transmit Request Queue Space Available
+ (PTxQSpcAvail)
+ Indicates the number of free locations available to be written in
+ the Periodic Transmit Request Queue. This queue holds both
+ IN and OUT requests.
+ * 8'h0: Periodic Transmit Request Queue is full
+ * 8'h1: 1 location available
+ * 8'h2: 2 locations available
+ * n: n locations available (0..8)
+ * Others: Reserved */
+ uint32_t ptxfspcavail : 16; /**< Periodic Transmit Data FIFO Space Available (PTxFSpcAvail)
+ Indicates the number of free locations available to be written to
+ in the Periodic TxFIFO.
+ Values are in terms of 32-bit words
+ * 16'h0: Periodic TxFIFO is full
+ * 16'h1: 1 word available
+ * 16'h2: 2 words available
+ * 16'hn: n words available (where 0..32768)
+ * 16'h8000: 32768 words available
+ * Others: Reserved */
+ } s;
+ struct cvmx_usbcx_hptxsts_s cn30xx;
+ struct cvmx_usbcx_hptxsts_s cn31xx;
+ struct cvmx_usbcx_hptxsts_s cn50xx;
+ struct cvmx_usbcx_hptxsts_s cn52xx;
+ struct cvmx_usbcx_hptxsts_s cn52xxp1;
+ struct cvmx_usbcx_hptxsts_s cn56xx;
+ struct cvmx_usbcx_hptxsts_s cn56xxp1;
+};
+typedef union cvmx_usbcx_hptxsts cvmx_usbcx_hptxsts_t;
+
+/**
+ * cvmx_usbc#_nptxdfifo#
+ *
+ * NPTX Data Fifo (NPTXDFIFO)
+ *
+ * A slave mode application uses this register to access the Tx FIFO for channel n.
+ */
+union cvmx_usbcx_nptxdfifox
+{
+ uint32_t u32;
+ struct cvmx_usbcx_nptxdfifox_s
+ {
+ uint32_t data : 32; /**< Reserved */
+ } s;
+ struct cvmx_usbcx_nptxdfifox_s cn30xx;
+ struct cvmx_usbcx_nptxdfifox_s cn31xx;
+ struct cvmx_usbcx_nptxdfifox_s cn50xx;
+ struct cvmx_usbcx_nptxdfifox_s cn52xx;
+ struct cvmx_usbcx_nptxdfifox_s cn52xxp1;
+ struct cvmx_usbcx_nptxdfifox_s cn56xx;
+ struct cvmx_usbcx_nptxdfifox_s cn56xxp1;
+};
+typedef union cvmx_usbcx_nptxdfifox cvmx_usbcx_nptxdfifox_t;
+
+/**
+ * cvmx_usbc#_pcgcctl
+ *
+ * Power and Clock Gating Control Register (PCGCCTL)
+ *
+ * The application can use this register to control the core's power-down and clock gating features.
+ */
+union cvmx_usbcx_pcgcctl
+{
+ uint32_t u32;
+ struct cvmx_usbcx_pcgcctl_s
+ {
+ uint32_t reserved_5_31 : 27;
+ uint32_t physuspended : 1; /**< PHY Suspended. (PhySuspended)
+ Indicates that the PHY has been suspended. After the
+ application sets the Stop Pclk bit (bit 0), this bit is updated once
+ the PHY is suspended.
+ Since the UTMI+ PHY suspend is controlled through a port, the
+ UTMI+ PHY is suspended immediately after Stop Pclk is set.
+ However, the ULPI PHY takes a few clocks to suspend,
+ because the suspend information is conveyed through the ULPI
+ protocol to the ULPI PHY. */
+ uint32_t rstpdwnmodule : 1; /**< Reset Power-Down Modules (RstPdwnModule)
+ This bit is valid only in Partial Power-Down mode. The
+ application sets this bit when the power is turned off. The
+ application clears this bit after the power is turned on and the
+ PHY clock is up. */
+ uint32_t pwrclmp : 1; /**< Power Clamp (PwrClmp)
+ This bit is only valid in Partial Power-Down mode. The
+ application sets this bit before the power is turned off to clamp
+ the signals between the power-on modules and the power-off
+ modules. The application clears the bit to disable the clamping
+ before the power is turned on. */
+ uint32_t gatehclk : 1; /**< Gate Hclk (GateHclk)
+ The application sets this bit to gate hclk to modules other than
+ the AHB Slave and Master and wakeup logic when the USB is
+ suspended or the session is not valid. The application clears
+ this bit when the USB is resumed or a new session starts. */
+ uint32_t stoppclk : 1; /**< Stop Pclk (StopPclk)
+ The application sets this bit to stop the PHY clock (phy_clk)
+ when the USB is suspended, the session is not valid, or the
+ device is disconnected. The application clears this bit when the
+ USB is resumed or a new session starts. */
+ } s;
+ struct cvmx_usbcx_pcgcctl_s cn30xx;
+ struct cvmx_usbcx_pcgcctl_s cn31xx;
+ struct cvmx_usbcx_pcgcctl_s cn50xx;
+ struct cvmx_usbcx_pcgcctl_s cn52xx;
+ struct cvmx_usbcx_pcgcctl_s cn52xxp1;
+ struct cvmx_usbcx_pcgcctl_s cn56xx;
+ struct cvmx_usbcx_pcgcctl_s cn56xxp1;
+};
+typedef union cvmx_usbcx_pcgcctl cvmx_usbcx_pcgcctl_t;
+
+#endif
--- /dev/null
+/***********************license start***************
+ * Copyright (c) 2003-2010 Cavium Networks (support@cavium.com). All rights
+ * reserved.
+ *
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ *
+ * * Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials provided
+ * with the distribution.
+
+ * * Neither the name of Cavium Networks nor the names of
+ * its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written
+ * permission.
+
+ * This Software, including technical data, may be subject to U.S. export control
+ * laws, including the U.S. Export Administration Act and its associated
+ * regulations, and may be subject to export or import regulations in other
+ * countries.
+
+ * TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE SOFTWARE IS PROVIDED "AS IS"
+ * AND WITH ALL FAULTS AND CAVIUM NETWORKS MAKES NO PROMISES, REPRESENTATIONS OR
+ * WARRANTIES, EITHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, WITH RESPECT TO
+ * THE SOFTWARE, INCLUDING ITS CONDITION, ITS CONFORMITY TO ANY REPRESENTATION OR
+ * DESCRIPTION, OR THE EXISTENCE OF ANY LATENT OR PATENT DEFECTS, AND CAVIUM
+ * SPECIFICALLY DISCLAIMS ALL IMPLIED (IF ANY) WARRANTIES OF TITLE,
+ * MERCHANTABILITY, NONINFRINGEMENT, FITNESS FOR A PARTICULAR PURPOSE, LACK OF
+ * VIRUSES, ACCURACY OR COMPLETENESS, QUIET ENJOYMENT, QUIET POSSESSION OR
+ * CORRESPONDENCE TO DESCRIPTION. THE ENTIRE RISK ARISING OUT OF USE OR
+ * PERFORMANCE OF THE SOFTWARE LIES WITH YOU.
+ ***********************license end**************************************/
+
+
+/**
+ * cvmx-usbnx-defs.h
+ *
+ * Configuration and status register (CSR) type definitions for
+ * Octeon usbnx.
+ *
+ * This file is auto generated. Do not edit.
+ *
+ * <hr>$Revision$<hr>
+ *
+ */
+#ifndef __CVMX_USBNX_TYPEDEFS_H__
+#define __CVMX_USBNX_TYPEDEFS_H__
+
+#define CVMX_USBNX_BIST_STATUS(block_id) (CVMX_ADD_IO_SEG(0x00011800680007F8ull) + ((block_id) & 1) * 0x10000000ull)
+#define CVMX_USBNX_CLK_CTL(block_id) (CVMX_ADD_IO_SEG(0x0001180068000010ull) + ((block_id) & 1) * 0x10000000ull)
+#define CVMX_USBNX_CTL_STATUS(block_id) (CVMX_ADD_IO_SEG(0x00016F0000000800ull) + ((block_id) & 1) * 0x100000000000ull)
+#define CVMX_USBNX_DMA0_INB_CHN0(block_id) (CVMX_ADD_IO_SEG(0x00016F0000000818ull) + ((block_id) & 1) * 0x100000000000ull)
+#define CVMX_USBNX_DMA0_INB_CHN1(block_id) (CVMX_ADD_IO_SEG(0x00016F0000000820ull) + ((block_id) & 1) * 0x100000000000ull)
+#define CVMX_USBNX_DMA0_INB_CHN2(block_id) (CVMX_ADD_IO_SEG(0x00016F0000000828ull) + ((block_id) & 1) * 0x100000000000ull)
+#define CVMX_USBNX_DMA0_INB_CHN3(block_id) (CVMX_ADD_IO_SEG(0x00016F0000000830ull) + ((block_id) & 1) * 0x100000000000ull)
+#define CVMX_USBNX_DMA0_INB_CHN4(block_id) (CVMX_ADD_IO_SEG(0x00016F0000000838ull) + ((block_id) & 1) * 0x100000000000ull)
+#define CVMX_USBNX_DMA0_INB_CHN5(block_id) (CVMX_ADD_IO_SEG(0x00016F0000000840ull) + ((block_id) & 1) * 0x100000000000ull)
+#define CVMX_USBNX_DMA0_INB_CHN6(block_id) (CVMX_ADD_IO_SEG(0x00016F0000000848ull) + ((block_id) & 1) * 0x100000000000ull)
+#define CVMX_USBNX_DMA0_INB_CHN7(block_id) (CVMX_ADD_IO_SEG(0x00016F0000000850ull) + ((block_id) & 1) * 0x100000000000ull)
+#define CVMX_USBNX_DMA0_OUTB_CHN0(block_id) (CVMX_ADD_IO_SEG(0x00016F0000000858ull) + ((block_id) & 1) * 0x100000000000ull)
+#define CVMX_USBNX_DMA0_OUTB_CHN1(block_id) (CVMX_ADD_IO_SEG(0x00016F0000000860ull) + ((block_id) & 1) * 0x100000000000ull)
+#define CVMX_USBNX_DMA0_OUTB_CHN2(block_id) (CVMX_ADD_IO_SEG(0x00016F0000000868ull) + ((block_id) & 1) * 0x100000000000ull)
+#define CVMX_USBNX_DMA0_OUTB_CHN3(block_id) (CVMX_ADD_IO_SEG(0x00016F0000000870ull) + ((block_id) & 1) * 0x100000000000ull)
+#define CVMX_USBNX_DMA0_OUTB_CHN4(block_id) (CVMX_ADD_IO_SEG(0x00016F0000000878ull) + ((block_id) & 1) * 0x100000000000ull)
+#define CVMX_USBNX_DMA0_OUTB_CHN5(block_id) (CVMX_ADD_IO_SEG(0x00016F0000000880ull) + ((block_id) & 1) * 0x100000000000ull)
+#define CVMX_USBNX_DMA0_OUTB_CHN6(block_id) (CVMX_ADD_IO_SEG(0x00016F0000000888ull) + ((block_id) & 1) * 0x100000000000ull)
+#define CVMX_USBNX_DMA0_OUTB_CHN7(block_id) (CVMX_ADD_IO_SEG(0x00016F0000000890ull) + ((block_id) & 1) * 0x100000000000ull)
+#define CVMX_USBNX_DMA_TEST(block_id) (CVMX_ADD_IO_SEG(0x00016F0000000808ull) + ((block_id) & 1) * 0x100000000000ull)
+#define CVMX_USBNX_INT_ENB(block_id) (CVMX_ADD_IO_SEG(0x0001180068000008ull) + ((block_id) & 1) * 0x10000000ull)
+#define CVMX_USBNX_INT_SUM(block_id) (CVMX_ADD_IO_SEG(0x0001180068000000ull) + ((block_id) & 1) * 0x10000000ull)
+#define CVMX_USBNX_USBP_CTL_STATUS(block_id) (CVMX_ADD_IO_SEG(0x0001180068000018ull) + ((block_id) & 1) * 0x10000000ull)
+
+/**
+ * cvmx_usbn#_bist_status
+ *
+ * USBN_BIST_STATUS = USBN's Control and Status
+ *
+ * Contain general control bits and status information for the USBN.
+ */
+union cvmx_usbnx_bist_status
+{
+ uint64_t u64;
+ struct cvmx_usbnx_bist_status_s
+ {
+ uint64_t reserved_7_63 : 57;
+ uint64_t u2nc_bis : 1; /**< Bist status U2N CTL FIFO Memory. */
+ uint64_t u2nf_bis : 1; /**< Bist status U2N FIFO Memory. */
+ uint64_t e2hc_bis : 1; /**< Bist status E2H CTL FIFO Memory. */
+ uint64_t n2uf_bis : 1; /**< Bist status N2U FIFO Memory. */
+ uint64_t usbc_bis : 1; /**< Bist status USBC FIFO Memory. */
+ uint64_t nif_bis : 1; /**< Bist status for Inbound Memory. */
+ uint64_t nof_bis : 1; /**< Bist status for Outbound Memory. */
+ } s;
+ struct cvmx_usbnx_bist_status_cn30xx
+ {
+ uint64_t reserved_3_63 : 61;
+ uint64_t usbc_bis : 1; /**< Bist status USBC FIFO Memory. */
+ uint64_t nif_bis : 1; /**< Bist status for Inbound Memory. */
+ uint64_t nof_bis : 1; /**< Bist status for Outbound Memory. */
+ } cn30xx;
+ struct cvmx_usbnx_bist_status_cn30xx cn31xx;
+ struct cvmx_usbnx_bist_status_s cn50xx;
+ struct cvmx_usbnx_bist_status_s cn52xx;
+ struct cvmx_usbnx_bist_status_s cn52xxp1;
+ struct cvmx_usbnx_bist_status_s cn56xx;
+ struct cvmx_usbnx_bist_status_s cn56xxp1;
+};
+typedef union cvmx_usbnx_bist_status cvmx_usbnx_bist_status_t;
+
+/**
+ * cvmx_usbn#_clk_ctl
+ *
+ * USBN_CLK_CTL = USBN's Clock Control
+ *
+ * This register is used to control the frequency of the hclk and the hreset and phy_rst signals.
+ */
+union cvmx_usbnx_clk_ctl
+{
+ uint64_t u64;
+ struct cvmx_usbnx_clk_ctl_s
+ {
+ uint64_t reserved_20_63 : 44;
+ uint64_t divide2 : 2; /**< The 'hclk' used by the USB subsystem is derived
+ from the eclk.
+ Also see the field DIVIDE. DIVIDE2<1> must currently
+ be zero because it is not implemented, so the maximum
+ ratio of eclk/hclk is currently 16.
+ The actual divide number for hclk is:
+ (DIVIDE2 + 1) * (DIVIDE + 1) */
+ uint64_t hclk_rst : 1; /**< When this field is '0' the HCLK-DIVIDER used to
+ generate the hclk in the USB Subsystem is held
+ in reset. This bit must be set to '0' before
+ changing the value os DIVIDE in this register.
+ The reset to the HCLK_DIVIDERis also asserted
+ when core reset is asserted. */
+ uint64_t p_x_on : 1; /**< Force USB-PHY on during suspend.
+ '1' USB-PHY XO block is powered-down during
+ suspend.
+ '0' USB-PHY XO block is powered-up during
+ suspend.
+ The value of this field must be set while POR is
+ active. */
+ uint64_t reserved_14_15 : 2;
+ uint64_t p_com_on : 1; /**< '0' Force USB-PHY XO Bias, Bandgap and PLL to
+ remain powered in Suspend Mode.
+ '1' The USB-PHY XO Bias, Bandgap and PLL are
+ powered down in suspend mode.
+ The value of this field must be set while POR is
+ active. */
+ uint64_t p_c_sel : 2; /**< Phy clock speed select.
+ Selects the reference clock / crystal frequency.
+ '11': Reserved
+ '10': 48 MHz (reserved when a crystal is used)
+ '01': 24 MHz (reserved when a crystal is used)
+ '00': 12 MHz
+ The value of this field must be set while POR is
+ active.
+ NOTE: if a crystal is used as a reference clock,
+ this field must be set to 12 MHz. */
+ uint64_t cdiv_byp : 1; /**< Used to enable the bypass input to the USB_CLK_DIV. */
+ uint64_t sd_mode : 2; /**< Scaledown mode for the USBC. Control timing events
+ in the USBC, for normal operation this must be '0'. */
+ uint64_t s_bist : 1; /**< Starts bist on the hclk memories, during the '0'
+ to '1' transition. */
+ uint64_t por : 1; /**< Power On Reset for the PHY.
+ Resets all the PHYS registers and state machines. */
+ uint64_t enable : 1; /**< When '1' allows the generation of the hclk. When
+ '0' the hclk will not be generated. SEE DIVIDE
+ field of this register. */
+ uint64_t prst : 1; /**< When this field is '0' the reset associated with
+ the phy_clk functionality in the USB Subsystem is
+ help in reset. This bit should not be set to '1'
+ until the time it takes 6 clocks (hclk or phy_clk,
+ whichever is slower) has passed. Under normal
+ operation once this bit is set to '1' it should not
+ be set to '0'. */
+ uint64_t hrst : 1; /**< When this field is '0' the reset associated with
+ the hclk functioanlity in the USB Subsystem is
+ held in reset.This bit should not be set to '1'
+ until 12ms after phy_clk is stable. Under normal
+ operation, once this bit is set to '1' it should
+ not be set to '0'. */
+ uint64_t divide : 3; /**< The frequency of 'hclk' used by the USB subsystem
+ is the eclk frequency divided by the value of
+ (DIVIDE2 + 1) * (DIVIDE + 1), also see the field
+ DIVIDE2 of this register.
+ The hclk frequency should be less than 125Mhz.
+ After writing a value to this field the SW should
+ read the field for the value written.
+ The ENABLE field of this register should not be set
+ until AFTER this field is set and then read. */
+ } s;
+ struct cvmx_usbnx_clk_ctl_cn30xx
+ {
+ uint64_t reserved_18_63 : 46;
+ uint64_t hclk_rst : 1; /**< When this field is '0' the HCLK-DIVIDER used to
+ generate the hclk in the USB Subsystem is held
+ in reset. This bit must be set to '0' before
+ changing the value os DIVIDE in this register.
+ The reset to the HCLK_DIVIDERis also asserted
+ when core reset is asserted. */
+ uint64_t p_x_on : 1; /**< Force USB-PHY on during suspend.
+ '1' USB-PHY XO block is powered-down during
+ suspend.
+ '0' USB-PHY XO block is powered-up during
+ suspend.
+ The value of this field must be set while POR is
+ active. */
+ uint64_t p_rclk : 1; /**< Phy refrence clock enable.
+ '1' The PHY PLL uses the XO block output as a
+ reference.
+ '0' Reserved. */
+ uint64_t p_xenbn : 1; /**< Phy external clock enable.
+ '1' The XO block uses the clock from a crystal.
+ '0' The XO block uses an external clock supplied
+ on the XO pin. USB_XI should be tied to
+ ground for this usage. */
+ uint64_t p_com_on : 1; /**< '0' Force USB-PHY XO Bias, Bandgap and PLL to
+ remain powered in Suspend Mode.
+ '1' The USB-PHY XO Bias, Bandgap and PLL are
+ powered down in suspend mode.
+ The value of this field must be set while POR is
+ active. */
+ uint64_t p_c_sel : 2; /**< Phy clock speed select.
+ Selects the reference clock / crystal frequency.
+ '11': Reserved
+ '10': 48 MHz
+ '01': 24 MHz
+ '00': 12 MHz
+ The value of this field must be set while POR is
+ active. */
+ uint64_t cdiv_byp : 1; /**< Used to enable the bypass input to the USB_CLK_DIV. */
+ uint64_t sd_mode : 2; /**< Scaledown mode for the USBC. Control timing events
+ in the USBC, for normal operation this must be '0'. */
+ uint64_t s_bist : 1; /**< Starts bist on the hclk memories, during the '0'
+ to '1' transition. */
+ uint64_t por : 1; /**< Power On Reset for the PHY.
+ Resets all the PHYS registers and state machines. */
+ uint64_t enable : 1; /**< When '1' allows the generation of the hclk. When
+ '0' the hclk will not be generated. */
+ uint64_t prst : 1; /**< When this field is '0' the reset associated with
+ the phy_clk functionality in the USB Subsystem is
+ help in reset. This bit should not be set to '1'
+ until the time it takes 6 clocks (hclk or phy_clk,
+ whichever is slower) has passed. Under normal
+ operation once this bit is set to '1' it should not
+ be set to '0'. */
+ uint64_t hrst : 1; /**< When this field is '0' the reset associated with
+ the hclk functioanlity in the USB Subsystem is
+ held in reset.This bit should not be set to '1'
+ until 12ms after phy_clk is stable. Under normal
+ operation, once this bit is set to '1' it should
+ not be set to '0'. */
+ uint64_t divide : 3; /**< The 'hclk' used by the USB subsystem is derived
+ from the eclk. The eclk will be divided by the
+ value of this field +1 to determine the hclk
+ frequency. (Also see HRST of this register).
+ The hclk frequency must be less than 125 MHz. */
+ } cn30xx;
+ struct cvmx_usbnx_clk_ctl_cn30xx cn31xx;
+ struct cvmx_usbnx_clk_ctl_cn50xx
+ {
+ uint64_t reserved_20_63 : 44;
+ uint64_t divide2 : 2; /**< The 'hclk' used by the USB subsystem is derived
+ from the eclk.
+ Also see the field DIVIDE. DIVIDE2<1> must currently
+ be zero because it is not implemented, so the maximum
+ ratio of eclk/hclk is currently 16.
+ The actual divide number for hclk is:
+ (DIVIDE2 + 1) * (DIVIDE + 1) */
+ uint64_t hclk_rst : 1; /**< When this field is '0' the HCLK-DIVIDER used to
+ generate the hclk in the USB Subsystem is held
+ in reset. This bit must be set to '0' before
+ changing the value os DIVIDE in this register.
+ The reset to the HCLK_DIVIDERis also asserted
+ when core reset is asserted. */
+ uint64_t reserved_16_16 : 1;
+ uint64_t p_rtype : 2; /**< PHY reference clock type
+ '0' The USB-PHY uses a 12MHz crystal as a clock
+ source at the USB_XO and USB_XI pins
+ '1' Reserved
+ '2' The USB_PHY uses 12/24/48MHz 2.5V board clock
+ at the USB_XO pin. USB_XI should be tied to
+ ground in this case.
+ '3' Reserved
+ (bit 14 was P_XENBN on 3xxx)
+ (bit 15 was P_RCLK on 3xxx) */
+ uint64_t p_com_on : 1; /**< '0' Force USB-PHY XO Bias, Bandgap and PLL to
+ remain powered in Suspend Mode.
+ '1' The USB-PHY XO Bias, Bandgap and PLL are
+ powered down in suspend mode.
+ The value of this field must be set while POR is
+ active. */
+ uint64_t p_c_sel : 2; /**< Phy clock speed select.
+ Selects the reference clock / crystal frequency.
+ '11': Reserved
+ '10': 48 MHz (reserved when a crystal is used)
+ '01': 24 MHz (reserved when a crystal is used)
+ '00': 12 MHz
+ The value of this field must be set while POR is
+ active.
+ NOTE: if a crystal is used as a reference clock,
+ this field must be set to 12 MHz. */
+ uint64_t cdiv_byp : 1; /**< Used to enable the bypass input to the USB_CLK_DIV. */
+ uint64_t sd_mode : 2; /**< Scaledown mode for the USBC. Control timing events
+ in the USBC, for normal operation this must be '0'. */
+ uint64_t s_bist : 1; /**< Starts bist on the hclk memories, during the '0'
+ to '1' transition. */
+ uint64_t por : 1; /**< Power On Reset for the PHY.
+ Resets all the PHYS registers and state machines. */
+ uint64_t enable : 1; /**< When '1' allows the generation of the hclk. When
+ '0' the hclk will not be generated. SEE DIVIDE
+ field of this register. */
+ uint64_t prst : 1; /**< When this field is '0' the reset associated with
+ the phy_clk functionality in the USB Subsystem is
+ help in reset. This bit should not be set to '1'
+ until the time it takes 6 clocks (hclk or phy_clk,
+ whichever is slower) has passed. Under normal
+ operation once this bit is set to '1' it should not
+ be set to '0'. */
+ uint64_t hrst : 1; /**< When this field is '0' the reset associated with
+ the hclk functioanlity in the USB Subsystem is
+ held in reset.This bit should not be set to '1'
+ until 12ms after phy_clk is stable. Under normal
+ operation, once this bit is set to '1' it should
+ not be set to '0'. */
+ uint64_t divide : 3; /**< The frequency of 'hclk' used by the USB subsystem
+ is the eclk frequency divided by the value of
+ (DIVIDE2 + 1) * (DIVIDE + 1), also see the field
+ DIVIDE2 of this register.
+ The hclk frequency should be less than 125Mhz.
+ After writing a value to this field the SW should
+ read the field for the value written.
+ The ENABLE field of this register should not be set
+ until AFTER this field is set and then read. */
+ } cn50xx;
+ struct cvmx_usbnx_clk_ctl_cn50xx cn52xx;
+ struct cvmx_usbnx_clk_ctl_cn50xx cn52xxp1;
+ struct cvmx_usbnx_clk_ctl_cn50xx cn56xx;
+ struct cvmx_usbnx_clk_ctl_cn50xx cn56xxp1;
+};
+typedef union cvmx_usbnx_clk_ctl cvmx_usbnx_clk_ctl_t;
+
+/**
+ * cvmx_usbn#_ctl_status
+ *
+ * USBN_CTL_STATUS = USBN's Control And Status Register
+ *
+ * Contains general control and status information for the USBN block.
+ */
+union cvmx_usbnx_ctl_status
+{
+ uint64_t u64;
+ struct cvmx_usbnx_ctl_status_s
+ {
+ uint64_t reserved_6_63 : 58;
+ uint64_t dma_0pag : 1; /**< When '1' sets the DMA engine will set the zero-Page
+ bit in the L2C store operation to the IOB. */
+ uint64_t dma_stt : 1; /**< When '1' sets the DMA engine to use STT operations. */
+ uint64_t dma_test : 1; /**< When '1' sets the DMA engine into Test-Mode.
+ For normal operation this bit should be '0'. */
+ uint64_t inv_a2 : 1; /**< When '1' causes the address[2] driven on the AHB
+ for USB-CORE FIFO access to be inverted. Also data
+ writen to and read from the AHB will have it byte
+ order swapped. If the orginal order was A-B-C-D the
+ new byte order will be D-C-B-A. */
+ uint64_t l2c_emod : 2; /**< Endian format for data from/to the L2C.
+ IN: A-B-C-D-E-F-G-H
+ OUT0: A-B-C-D-E-F-G-H
+ OUT1: H-G-F-E-D-C-B-A
+ OUT2: D-C-B-A-H-G-F-E
+ OUT3: E-F-G-H-A-B-C-D */
+ } s;
+ struct cvmx_usbnx_ctl_status_s cn30xx;
+ struct cvmx_usbnx_ctl_status_s cn31xx;
+ struct cvmx_usbnx_ctl_status_s cn50xx;
+ struct cvmx_usbnx_ctl_status_s cn52xx;
+ struct cvmx_usbnx_ctl_status_s cn52xxp1;
+ struct cvmx_usbnx_ctl_status_s cn56xx;
+ struct cvmx_usbnx_ctl_status_s cn56xxp1;
+};
+typedef union cvmx_usbnx_ctl_status cvmx_usbnx_ctl_status_t;
+
+/**
+ * cvmx_usbn#_dma0_inb_chn0
+ *
+ * USBN_DMA0_INB_CHN0 = USBN's Inbound DMA for USB0 Channel0
+ *
+ * Contains the starting address for use when USB0 writes to L2C via Channel0.
+ * Writing of this register sets the base address.
+ */
+union cvmx_usbnx_dma0_inb_chn0
+{
+ uint64_t u64;
+ struct cvmx_usbnx_dma0_inb_chn0_s
+ {
+ uint64_t reserved_36_63 : 28;
+ uint64_t addr : 36; /**< Base address for DMA Write to L2C. */
+ } s;
+ struct cvmx_usbnx_dma0_inb_chn0_s cn30xx;
+ struct cvmx_usbnx_dma0_inb_chn0_s cn31xx;
+ struct cvmx_usbnx_dma0_inb_chn0_s cn50xx;
+ struct cvmx_usbnx_dma0_inb_chn0_s cn52xx;
+ struct cvmx_usbnx_dma0_inb_chn0_s cn52xxp1;
+ struct cvmx_usbnx_dma0_inb_chn0_s cn56xx;
+ struct cvmx_usbnx_dma0_inb_chn0_s cn56xxp1;
+};
+typedef union cvmx_usbnx_dma0_inb_chn0 cvmx_usbnx_dma0_inb_chn0_t;
+
+/**
+ * cvmx_usbn#_dma0_inb_chn1
+ *
+ * USBN_DMA0_INB_CHN1 = USBN's Inbound DMA for USB0 Channel1
+ *
+ * Contains the starting address for use when USB0 writes to L2C via Channel1.
+ * Writing of this register sets the base address.
+ */
+union cvmx_usbnx_dma0_inb_chn1
+{
+ uint64_t u64;
+ struct cvmx_usbnx_dma0_inb_chn1_s
+ {
+ uint64_t reserved_36_63 : 28;
+ uint64_t addr : 36; /**< Base address for DMA Write to L2C. */
+ } s;
+ struct cvmx_usbnx_dma0_inb_chn1_s cn30xx;
+ struct cvmx_usbnx_dma0_inb_chn1_s cn31xx;
+ struct cvmx_usbnx_dma0_inb_chn1_s cn50xx;
+ struct cvmx_usbnx_dma0_inb_chn1_s cn52xx;
+ struct cvmx_usbnx_dma0_inb_chn1_s cn52xxp1;
+ struct cvmx_usbnx_dma0_inb_chn1_s cn56xx;
+ struct cvmx_usbnx_dma0_inb_chn1_s cn56xxp1;
+};
+typedef union cvmx_usbnx_dma0_inb_chn1 cvmx_usbnx_dma0_inb_chn1_t;
+
+/**
+ * cvmx_usbn#_dma0_inb_chn2
+ *
+ * USBN_DMA0_INB_CHN2 = USBN's Inbound DMA for USB0 Channel2
+ *
+ * Contains the starting address for use when USB0 writes to L2C via Channel2.
+ * Writing of this register sets the base address.
+ */
+union cvmx_usbnx_dma0_inb_chn2
+{
+ uint64_t u64;
+ struct cvmx_usbnx_dma0_inb_chn2_s
+ {
+ uint64_t reserved_36_63 : 28;
+ uint64_t addr : 36; /**< Base address for DMA Write to L2C. */
+ } s;
+ struct cvmx_usbnx_dma0_inb_chn2_s cn30xx;
+ struct cvmx_usbnx_dma0_inb_chn2_s cn31xx;
+ struct cvmx_usbnx_dma0_inb_chn2_s cn50xx;
+ struct cvmx_usbnx_dma0_inb_chn2_s cn52xx;
+ struct cvmx_usbnx_dma0_inb_chn2_s cn52xxp1;
+ struct cvmx_usbnx_dma0_inb_chn2_s cn56xx;
+ struct cvmx_usbnx_dma0_inb_chn2_s cn56xxp1;
+};
+typedef union cvmx_usbnx_dma0_inb_chn2 cvmx_usbnx_dma0_inb_chn2_t;
+
+/**
+ * cvmx_usbn#_dma0_inb_chn3
+ *
+ * USBN_DMA0_INB_CHN3 = USBN's Inbound DMA for USB0 Channel3
+ *
+ * Contains the starting address for use when USB0 writes to L2C via Channel3.
+ * Writing of this register sets the base address.
+ */
+union cvmx_usbnx_dma0_inb_chn3
+{
+ uint64_t u64;
+ struct cvmx_usbnx_dma0_inb_chn3_s
+ {
+ uint64_t reserved_36_63 : 28;
+ uint64_t addr : 36; /**< Base address for DMA Write to L2C. */
+ } s;
+ struct cvmx_usbnx_dma0_inb_chn3_s cn30xx;
+ struct cvmx_usbnx_dma0_inb_chn3_s cn31xx;
+ struct cvmx_usbnx_dma0_inb_chn3_s cn50xx;
+ struct cvmx_usbnx_dma0_inb_chn3_s cn52xx;
+ struct cvmx_usbnx_dma0_inb_chn3_s cn52xxp1;
+ struct cvmx_usbnx_dma0_inb_chn3_s cn56xx;
+ struct cvmx_usbnx_dma0_inb_chn3_s cn56xxp1;
+};
+typedef union cvmx_usbnx_dma0_inb_chn3 cvmx_usbnx_dma0_inb_chn3_t;
+
+/**
+ * cvmx_usbn#_dma0_inb_chn4
+ *
+ * USBN_DMA0_INB_CHN4 = USBN's Inbound DMA for USB0 Channel4
+ *
+ * Contains the starting address for use when USB0 writes to L2C via Channel4.
+ * Writing of this register sets the base address.
+ */
+union cvmx_usbnx_dma0_inb_chn4
+{
+ uint64_t u64;
+ struct cvmx_usbnx_dma0_inb_chn4_s
+ {
+ uint64_t reserved_36_63 : 28;
+ uint64_t addr : 36; /**< Base address for DMA Write to L2C. */
+ } s;
+ struct cvmx_usbnx_dma0_inb_chn4_s cn30xx;
+ struct cvmx_usbnx_dma0_inb_chn4_s cn31xx;
+ struct cvmx_usbnx_dma0_inb_chn4_s cn50xx;
+ struct cvmx_usbnx_dma0_inb_chn4_s cn52xx;
+ struct cvmx_usbnx_dma0_inb_chn4_s cn52xxp1;
+ struct cvmx_usbnx_dma0_inb_chn4_s cn56xx;
+ struct cvmx_usbnx_dma0_inb_chn4_s cn56xxp1;
+};
+typedef union cvmx_usbnx_dma0_inb_chn4 cvmx_usbnx_dma0_inb_chn4_t;
+
+/**
+ * cvmx_usbn#_dma0_inb_chn5
+ *
+ * USBN_DMA0_INB_CHN5 = USBN's Inbound DMA for USB0 Channel5
+ *
+ * Contains the starting address for use when USB0 writes to L2C via Channel5.
+ * Writing of this register sets the base address.
+ */
+union cvmx_usbnx_dma0_inb_chn5
+{
+ uint64_t u64;
+ struct cvmx_usbnx_dma0_inb_chn5_s
+ {
+ uint64_t reserved_36_63 : 28;
+ uint64_t addr : 36; /**< Base address for DMA Write to L2C. */
+ } s;
+ struct cvmx_usbnx_dma0_inb_chn5_s cn30xx;
+ struct cvmx_usbnx_dma0_inb_chn5_s cn31xx;
+ struct cvmx_usbnx_dma0_inb_chn5_s cn50xx;
+ struct cvmx_usbnx_dma0_inb_chn5_s cn52xx;
+ struct cvmx_usbnx_dma0_inb_chn5_s cn52xxp1;
+ struct cvmx_usbnx_dma0_inb_chn5_s cn56xx;
+ struct cvmx_usbnx_dma0_inb_chn5_s cn56xxp1;
+};
+typedef union cvmx_usbnx_dma0_inb_chn5 cvmx_usbnx_dma0_inb_chn5_t;
+
+/**
+ * cvmx_usbn#_dma0_inb_chn6
+ *
+ * USBN_DMA0_INB_CHN6 = USBN's Inbound DMA for USB0 Channel6
+ *
+ * Contains the starting address for use when USB0 writes to L2C via Channel6.
+ * Writing of this register sets the base address.
+ */
+union cvmx_usbnx_dma0_inb_chn6
+{
+ uint64_t u64;
+ struct cvmx_usbnx_dma0_inb_chn6_s
+ {
+ uint64_t reserved_36_63 : 28;
+ uint64_t addr : 36; /**< Base address for DMA Write to L2C. */
+ } s;
+ struct cvmx_usbnx_dma0_inb_chn6_s cn30xx;
+ struct cvmx_usbnx_dma0_inb_chn6_s cn31xx;
+ struct cvmx_usbnx_dma0_inb_chn6_s cn50xx;
+ struct cvmx_usbnx_dma0_inb_chn6_s cn52xx;
+ struct cvmx_usbnx_dma0_inb_chn6_s cn52xxp1;
+ struct cvmx_usbnx_dma0_inb_chn6_s cn56xx;
+ struct cvmx_usbnx_dma0_inb_chn6_s cn56xxp1;
+};
+typedef union cvmx_usbnx_dma0_inb_chn6 cvmx_usbnx_dma0_inb_chn6_t;
+
+/**
+ * cvmx_usbn#_dma0_inb_chn7
+ *
+ * USBN_DMA0_INB_CHN7 = USBN's Inbound DMA for USB0 Channel7
+ *
+ * Contains the starting address for use when USB0 writes to L2C via Channel7.
+ * Writing of this register sets the base address.
+ */
+union cvmx_usbnx_dma0_inb_chn7
+{
+ uint64_t u64;
+ struct cvmx_usbnx_dma0_inb_chn7_s
+ {
+ uint64_t reserved_36_63 : 28;
+ uint64_t addr : 36; /**< Base address for DMA Write to L2C. */
+ } s;
+ struct cvmx_usbnx_dma0_inb_chn7_s cn30xx;
+ struct cvmx_usbnx_dma0_inb_chn7_s cn31xx;
+ struct cvmx_usbnx_dma0_inb_chn7_s cn50xx;
+ struct cvmx_usbnx_dma0_inb_chn7_s cn52xx;
+ struct cvmx_usbnx_dma0_inb_chn7_s cn52xxp1;
+ struct cvmx_usbnx_dma0_inb_chn7_s cn56xx;
+ struct cvmx_usbnx_dma0_inb_chn7_s cn56xxp1;
+};
+typedef union cvmx_usbnx_dma0_inb_chn7 cvmx_usbnx_dma0_inb_chn7_t;
+
+/**
+ * cvmx_usbn#_dma0_outb_chn0
+ *
+ * USBN_DMA0_OUTB_CHN0 = USBN's Outbound DMA for USB0 Channel0
+ *
+ * Contains the starting address for use when USB0 reads from L2C via Channel0.
+ * Writing of this register sets the base address.
+ */
+union cvmx_usbnx_dma0_outb_chn0
+{
+ uint64_t u64;
+ struct cvmx_usbnx_dma0_outb_chn0_s
+ {
+ uint64_t reserved_36_63 : 28;
+ uint64_t addr : 36; /**< Base address for DMA Read from L2C. */
+ } s;
+ struct cvmx_usbnx_dma0_outb_chn0_s cn30xx;
+ struct cvmx_usbnx_dma0_outb_chn0_s cn31xx;
+ struct cvmx_usbnx_dma0_outb_chn0_s cn50xx;
+ struct cvmx_usbnx_dma0_outb_chn0_s cn52xx;
+ struct cvmx_usbnx_dma0_outb_chn0_s cn52xxp1;
+ struct cvmx_usbnx_dma0_outb_chn0_s cn56xx;
+ struct cvmx_usbnx_dma0_outb_chn0_s cn56xxp1;
+};
+typedef union cvmx_usbnx_dma0_outb_chn0 cvmx_usbnx_dma0_outb_chn0_t;
+
+/**
+ * cvmx_usbn#_dma0_outb_chn1
+ *
+ * USBN_DMA0_OUTB_CHN1 = USBN's Outbound DMA for USB0 Channel1
+ *
+ * Contains the starting address for use when USB0 reads from L2C via Channel1.
+ * Writing of this register sets the base address.
+ */
+union cvmx_usbnx_dma0_outb_chn1
+{
+ uint64_t u64;
+ struct cvmx_usbnx_dma0_outb_chn1_s
+ {
+ uint64_t reserved_36_63 : 28;
+ uint64_t addr : 36; /**< Base address for DMA Read from L2C. */
+ } s;
+ struct cvmx_usbnx_dma0_outb_chn1_s cn30xx;
+ struct cvmx_usbnx_dma0_outb_chn1_s cn31xx;
+ struct cvmx_usbnx_dma0_outb_chn1_s cn50xx;
+ struct cvmx_usbnx_dma0_outb_chn1_s cn52xx;
+ struct cvmx_usbnx_dma0_outb_chn1_s cn52xxp1;
+ struct cvmx_usbnx_dma0_outb_chn1_s cn56xx;
+ struct cvmx_usbnx_dma0_outb_chn1_s cn56xxp1;
+};
+typedef union cvmx_usbnx_dma0_outb_chn1 cvmx_usbnx_dma0_outb_chn1_t;
+
+/**
+ * cvmx_usbn#_dma0_outb_chn2
+ *
+ * USBN_DMA0_OUTB_CHN2 = USBN's Outbound DMA for USB0 Channel2
+ *
+ * Contains the starting address for use when USB0 reads from L2C via Channel2.
+ * Writing of this register sets the base address.
+ */
+union cvmx_usbnx_dma0_outb_chn2
+{
+ uint64_t u64;
+ struct cvmx_usbnx_dma0_outb_chn2_s
+ {
+ uint64_t reserved_36_63 : 28;
+ uint64_t addr : 36; /**< Base address for DMA Read from L2C. */
+ } s;
+ struct cvmx_usbnx_dma0_outb_chn2_s cn30xx;
+ struct cvmx_usbnx_dma0_outb_chn2_s cn31xx;
+ struct cvmx_usbnx_dma0_outb_chn2_s cn50xx;
+ struct cvmx_usbnx_dma0_outb_chn2_s cn52xx;
+ struct cvmx_usbnx_dma0_outb_chn2_s cn52xxp1;
+ struct cvmx_usbnx_dma0_outb_chn2_s cn56xx;
+ struct cvmx_usbnx_dma0_outb_chn2_s cn56xxp1;
+};
+typedef union cvmx_usbnx_dma0_outb_chn2 cvmx_usbnx_dma0_outb_chn2_t;
+
+/**
+ * cvmx_usbn#_dma0_outb_chn3
+ *
+ * USBN_DMA0_OUTB_CHN3 = USBN's Outbound DMA for USB0 Channel3
+ *
+ * Contains the starting address for use when USB0 reads from L2C via Channel3.
+ * Writing of this register sets the base address.
+ */
+union cvmx_usbnx_dma0_outb_chn3
+{
+ uint64_t u64;
+ struct cvmx_usbnx_dma0_outb_chn3_s
+ {
+ uint64_t reserved_36_63 : 28;
+ uint64_t addr : 36; /**< Base address for DMA Read from L2C. */
+ } s;
+ struct cvmx_usbnx_dma0_outb_chn3_s cn30xx;
+ struct cvmx_usbnx_dma0_outb_chn3_s cn31xx;
+ struct cvmx_usbnx_dma0_outb_chn3_s cn50xx;
+ struct cvmx_usbnx_dma0_outb_chn3_s cn52xx;
+ struct cvmx_usbnx_dma0_outb_chn3_s cn52xxp1;
+ struct cvmx_usbnx_dma0_outb_chn3_s cn56xx;
+ struct cvmx_usbnx_dma0_outb_chn3_s cn56xxp1;
+};
+typedef union cvmx_usbnx_dma0_outb_chn3 cvmx_usbnx_dma0_outb_chn3_t;
+
+/**
+ * cvmx_usbn#_dma0_outb_chn4
+ *
+ * USBN_DMA0_OUTB_CHN4 = USBN's Outbound DMA for USB0 Channel4
+ *
+ * Contains the starting address for use when USB0 reads from L2C via Channel4.
+ * Writing of this register sets the base address.
+ */
+union cvmx_usbnx_dma0_outb_chn4
+{
+ uint64_t u64;
+ struct cvmx_usbnx_dma0_outb_chn4_s
+ {
+ uint64_t reserved_36_63 : 28;
+ uint64_t addr : 36; /**< Base address for DMA Read from L2C. */
+ } s;
+ struct cvmx_usbnx_dma0_outb_chn4_s cn30xx;
+ struct cvmx_usbnx_dma0_outb_chn4_s cn31xx;
+ struct cvmx_usbnx_dma0_outb_chn4_s cn50xx;
+ struct cvmx_usbnx_dma0_outb_chn4_s cn52xx;
+ struct cvmx_usbnx_dma0_outb_chn4_s cn52xxp1;
+ struct cvmx_usbnx_dma0_outb_chn4_s cn56xx;
+ struct cvmx_usbnx_dma0_outb_chn4_s cn56xxp1;
+};
+typedef union cvmx_usbnx_dma0_outb_chn4 cvmx_usbnx_dma0_outb_chn4_t;
+
+/**
+ * cvmx_usbn#_dma0_outb_chn5
+ *
+ * USBN_DMA0_OUTB_CHN5 = USBN's Outbound DMA for USB0 Channel5
+ *
+ * Contains the starting address for use when USB0 reads from L2C via Channel5.
+ * Writing of this register sets the base address.
+ */
+union cvmx_usbnx_dma0_outb_chn5
+{
+ uint64_t u64;
+ struct cvmx_usbnx_dma0_outb_chn5_s
+ {
+ uint64_t reserved_36_63 : 28;
+ uint64_t addr : 36; /**< Base address for DMA Read from L2C. */
+ } s;
+ struct cvmx_usbnx_dma0_outb_chn5_s cn30xx;
+ struct cvmx_usbnx_dma0_outb_chn5_s cn31xx;
+ struct cvmx_usbnx_dma0_outb_chn5_s cn50xx;
+ struct cvmx_usbnx_dma0_outb_chn5_s cn52xx;
+ struct cvmx_usbnx_dma0_outb_chn5_s cn52xxp1;
+ struct cvmx_usbnx_dma0_outb_chn5_s cn56xx;
+ struct cvmx_usbnx_dma0_outb_chn5_s cn56xxp1;
+};
+typedef union cvmx_usbnx_dma0_outb_chn5 cvmx_usbnx_dma0_outb_chn5_t;
+
+/**
+ * cvmx_usbn#_dma0_outb_chn6
+ *
+ * USBN_DMA0_OUTB_CHN6 = USBN's Outbound DMA for USB0 Channel6
+ *
+ * Contains the starting address for use when USB0 reads from L2C via Channel6.
+ * Writing of this register sets the base address.
+ */
+union cvmx_usbnx_dma0_outb_chn6
+{
+ uint64_t u64;
+ struct cvmx_usbnx_dma0_outb_chn6_s
+ {
+ uint64_t reserved_36_63 : 28;
+ uint64_t addr : 36; /**< Base address for DMA Read from L2C. */
+ } s;
+ struct cvmx_usbnx_dma0_outb_chn6_s cn30xx;
+ struct cvmx_usbnx_dma0_outb_chn6_s cn31xx;
+ struct cvmx_usbnx_dma0_outb_chn6_s cn50xx;
+ struct cvmx_usbnx_dma0_outb_chn6_s cn52xx;
+ struct cvmx_usbnx_dma0_outb_chn6_s cn52xxp1;
+ struct cvmx_usbnx_dma0_outb_chn6_s cn56xx;
+ struct cvmx_usbnx_dma0_outb_chn6_s cn56xxp1;
+};
+typedef union cvmx_usbnx_dma0_outb_chn6 cvmx_usbnx_dma0_outb_chn6_t;
+
+/**
+ * cvmx_usbn#_dma0_outb_chn7
+ *
+ * USBN_DMA0_OUTB_CHN7 = USBN's Outbound DMA for USB0 Channel7
+ *
+ * Contains the starting address for use when USB0 reads from L2C via Channel7.
+ * Writing of this register sets the base address.
+ */
+union cvmx_usbnx_dma0_outb_chn7
+{
+ uint64_t u64;
+ struct cvmx_usbnx_dma0_outb_chn7_s
+ {
+ uint64_t reserved_36_63 : 28;
+ uint64_t addr : 36; /**< Base address for DMA Read from L2C. */
+ } s;
+ struct cvmx_usbnx_dma0_outb_chn7_s cn30xx;
+ struct cvmx_usbnx_dma0_outb_chn7_s cn31xx;
+ struct cvmx_usbnx_dma0_outb_chn7_s cn50xx;
+ struct cvmx_usbnx_dma0_outb_chn7_s cn52xx;
+ struct cvmx_usbnx_dma0_outb_chn7_s cn52xxp1;
+ struct cvmx_usbnx_dma0_outb_chn7_s cn56xx;
+ struct cvmx_usbnx_dma0_outb_chn7_s cn56xxp1;
+};
+typedef union cvmx_usbnx_dma0_outb_chn7 cvmx_usbnx_dma0_outb_chn7_t;
+
+/**
+ * cvmx_usbn#_dma_test
+ *
+ * USBN_DMA_TEST = USBN's DMA TestRegister
+ *
+ * This register can cause the external DMA engine to the USB-Core to make transfers from/to L2C/USB-FIFOs
+ */
+union cvmx_usbnx_dma_test
+{
+ uint64_t u64;
+ struct cvmx_usbnx_dma_test_s
+ {
+ uint64_t reserved_40_63 : 24;
+ uint64_t done : 1; /**< This field is set when a DMA completes. Writing a
+ '1' to this field clears this bit. */
+ uint64_t req : 1; /**< DMA Request. Writing a 1 to this register
+ will cause a DMA request as specified in the other
+ fields of this register to take place. This field
+ will always read as '0'. */
+ uint64_t f_addr : 18; /**< The address to read from in the Data-Fifo. */
+ uint64_t count : 11; /**< DMA Request Count. */
+ uint64_t channel : 5; /**< DMA Channel/Enpoint. */
+ uint64_t burst : 4; /**< DMA Burst Size. */
+ } s;
+ struct cvmx_usbnx_dma_test_s cn30xx;
+ struct cvmx_usbnx_dma_test_s cn31xx;
+ struct cvmx_usbnx_dma_test_s cn50xx;
+ struct cvmx_usbnx_dma_test_s cn52xx;
+ struct cvmx_usbnx_dma_test_s cn52xxp1;
+ struct cvmx_usbnx_dma_test_s cn56xx;
+ struct cvmx_usbnx_dma_test_s cn56xxp1;
+};
+typedef union cvmx_usbnx_dma_test cvmx_usbnx_dma_test_t;
+
+/**
+ * cvmx_usbn#_int_enb
+ *
+ * USBN_INT_ENB = USBN's Interrupt Enable
+ *
+ * The USBN's interrupt enable register.
+ */
+union cvmx_usbnx_int_enb
+{
+ uint64_t u64;
+ struct cvmx_usbnx_int_enb_s
+ {
+ uint64_t reserved_38_63 : 26;
+ uint64_t nd4o_dpf : 1; /**< When set (1) and bit 37 of the USBN_INT_SUM
+ register is asserted the USBN will assert an
+ interrupt. */
+ uint64_t nd4o_dpe : 1; /**< When set (1) and bit 36 of the USBN_INT_SUM
+ register is asserted the USBN will assert an
+ interrupt. */
+ uint64_t nd4o_rpf : 1; /**< When set (1) and bit 35 of the USBN_INT_SUM
+ register is asserted the USBN will assert an
+ interrupt. */
+ uint64_t nd4o_rpe : 1; /**< When set (1) and bit 34 of the USBN_INT_SUM
+ register is asserted the USBN will assert an
+ interrupt. */
+ uint64_t ltl_f_pf : 1; /**< When set (1) and bit 33 of the USBN_INT_SUM
+ register is asserted the USBN will assert an
+ interrupt. */
+ uint64_t ltl_f_pe : 1; /**< When set (1) and bit 32 of the USBN_INT_SUM
+ register is asserted the USBN will assert an
+ interrupt. */
+ uint64_t u2n_c_pe : 1; /**< When set (1) and bit 31 of the USBN_INT_SUM
+ register is asserted the USBN will assert an
+ interrupt. */
+ uint64_t u2n_c_pf : 1; /**< When set (1) and bit 30 of the USBN_INT_SUM
+ register is asserted the USBN will assert an
+ interrupt. */
+ uint64_t u2n_d_pf : 1; /**< When set (1) and bit 29 of the USBN_INT_SUM
+ register is asserted the USBN will assert an
+ interrupt. */
+ uint64_t u2n_d_pe : 1; /**< When set (1) and bit 28 of the USBN_INT_SUM
+ register is asserted the USBN will assert an
+ interrupt. */
+ uint64_t n2u_pe : 1; /**< When set (1) and bit 27 of the USBN_INT_SUM
+ register is asserted the USBN will assert an
+ interrupt. */
+ uint64_t n2u_pf : 1; /**< When set (1) and bit 26 of the USBN_INT_SUM
+ register is asserted the USBN will assert an
+ interrupt. */
+ uint64_t uod_pf : 1; /**< When set (1) and bit 25 of the USBN_INT_SUM
+ register is asserted the USBN will assert an
+ interrupt. */
+ uint64_t uod_pe : 1; /**< When set (1) and bit 24 of the USBN_INT_SUM
+ register is asserted the USBN will assert an
+ interrupt. */
+ uint64_t rq_q3_e : 1; /**< When set (1) and bit 23 of the USBN_INT_SUM
+ register is asserted the USBN will assert an
+ interrupt. */
+ uint64_t rq_q3_f : 1; /**< When set (1) and bit 22 of the USBN_INT_SUM
+ register is asserted the USBN will assert an
+ interrupt. */
+ uint64_t rq_q2_e : 1; /**< When set (1) and bit 21 of the USBN_INT_SUM
+ register is asserted the USBN will assert an
+ interrupt. */
+ uint64_t rq_q2_f : 1; /**< When set (1) and bit 20 of the USBN_INT_SUM
+ register is asserted the USBN will assert an
+ interrupt. */
+ uint64_t rg_fi_f : 1; /**< When set (1) and bit 19 of the USBN_INT_SUM
+ register is asserted the USBN will assert an
+ interrupt. */
+ uint64_t rg_fi_e : 1; /**< When set (1) and bit 18 of the USBN_INT_SUM
+ register is asserted the USBN will assert an
+ interrupt. */
+ uint64_t l2_fi_f : 1; /**< When set (1) and bit 17 of the USBN_INT_SUM
+ register is asserted the USBN will assert an
+ interrupt. */
+ uint64_t l2_fi_e : 1; /**< When set (1) and bit 16 of the USBN_INT_SUM
+ register is asserted the USBN will assert an
+ interrupt. */
+ uint64_t l2c_a_f : 1; /**< When set (1) and bit 15 of the USBN_INT_SUM
+ register is asserted the USBN will assert an
+ interrupt. */
+ uint64_t l2c_s_e : 1; /**< When set (1) and bit 14 of the USBN_INT_SUM
+ register is asserted the USBN will assert an
+ interrupt. */
+ uint64_t dcred_f : 1; /**< When set (1) and bit 13 of the USBN_INT_SUM
+ register is asserted the USBN will assert an
+ interrupt. */
+ uint64_t dcred_e : 1; /**< When set (1) and bit 12 of the USBN_INT_SUM
+ register is asserted the USBN will assert an
+ interrupt. */
+ uint64_t lt_pu_f : 1; /**< When set (1) and bit 11 of the USBN_INT_SUM
+ register is asserted the USBN will assert an
+ interrupt. */
+ uint64_t lt_po_e : 1; /**< When set (1) and bit 10 of the USBN_INT_SUM
+ register is asserted the USBN will assert an
+ interrupt. */
+ uint64_t nt_pu_f : 1; /**< When set (1) and bit 9 of the USBN_INT_SUM
+ register is asserted the USBN will assert an
+ interrupt. */
+ uint64_t nt_po_e : 1; /**< When set (1) and bit 8 of the USBN_INT_SUM
+ register is asserted the USBN will assert an
+ interrupt. */
+ uint64_t pt_pu_f : 1; /**< When set (1) and bit 7 of the USBN_INT_SUM
+ register is asserted the USBN will assert an
+ interrupt. */
+ uint64_t pt_po_e : 1; /**< When set (1) and bit 6 of the USBN_INT_SUM
+ register is asserted the USBN will assert an
+ interrupt. */
+ uint64_t lr_pu_f : 1; /**< When set (1) and bit 5 of the USBN_INT_SUM
+ register is asserted the USBN will assert an
+ interrupt. */
+ uint64_t lr_po_e : 1; /**< When set (1) and bit 4 of the USBN_INT_SUM
+ register is asserted the USBN will assert an
+ interrupt. */
+ uint64_t nr_pu_f : 1; /**< When set (1) and bit 3 of the USBN_INT_SUM
+ register is asserted the USBN will assert an
+ interrupt. */
+ uint64_t nr_po_e : 1; /**< When set (1) and bit 2 of the USBN_INT_SUM
+ register is asserted the USBN will assert an
+ interrupt. */
+ uint64_t pr_pu_f : 1; /**< When set (1) and bit 1 of the USBN_INT_SUM
+ register is asserted the USBN will assert an
+ interrupt. */
+ uint64_t pr_po_e : 1; /**< When set (1) and bit 0 of the USBN_INT_SUM
+ register is asserted the USBN will assert an
+ interrupt. */
+ } s;
+ struct cvmx_usbnx_int_enb_s cn30xx;
+ struct cvmx_usbnx_int_enb_s cn31xx;
+ struct cvmx_usbnx_int_enb_cn50xx
+ {
+ uint64_t reserved_38_63 : 26;
+ uint64_t nd4o_dpf : 1; /**< When set (1) and bit 37 of the USBN_INT_SUM
+ register is asserted the USBN will assert an
+ interrupt. */
+ uint64_t nd4o_dpe : 1; /**< When set (1) and bit 36 of the USBN_INT_SUM
+ register is asserted the USBN will assert an
+ interrupt. */
+ uint64_t nd4o_rpf : 1; /**< When set (1) and bit 35 of the USBN_INT_SUM
+ register is asserted the USBN will assert an
+ interrupt. */
+ uint64_t nd4o_rpe : 1; /**< When set (1) and bit 34 of the USBN_INT_SUM
+ register is asserted the USBN will assert an
+ interrupt. */
+ uint64_t ltl_f_pf : 1; /**< When set (1) and bit 33 of the USBN_INT_SUM
+ register is asserted the USBN will assert an
+ interrupt. */
+ uint64_t ltl_f_pe : 1; /**< When set (1) and bit 32 of the USBN_INT_SUM
+ register is asserted the USBN will assert an
+ interrupt. */
+ uint64_t reserved_26_31 : 6;
+ uint64_t uod_pf : 1; /**< When set (1) and bit 25 of the USBN_INT_SUM
+ register is asserted the USBN will assert an
+ interrupt. */
+ uint64_t uod_pe : 1; /**< When set (1) and bit 24 of the USBN_INT_SUM
+ register is asserted the USBN will assert an
+ interrupt. */
+ uint64_t rq_q3_e : 1; /**< When set (1) and bit 23 of the USBN_INT_SUM
+ register is asserted the USBN will assert an
+ interrupt. */
+ uint64_t rq_q3_f : 1; /**< When set (1) and bit 22 of the USBN_INT_SUM
+ register is asserted the USBN will assert an
+ interrupt. */
+ uint64_t rq_q2_e : 1; /**< When set (1) and bit 21 of the USBN_INT_SUM
+ register is asserted the USBN will assert an
+ interrupt. */
+ uint64_t rq_q2_f : 1; /**< When set (1) and bit 20 of the USBN_INT_SUM
+ register is asserted the USBN will assert an
+ interrupt. */
+ uint64_t rg_fi_f : 1; /**< When set (1) and bit 19 of the USBN_INT_SUM
+ register is asserted the USBN will assert an
+ interrupt. */
+ uint64_t rg_fi_e : 1; /**< When set (1) and bit 18 of the USBN_INT_SUM
+ register is asserted the USBN will assert an
+ interrupt. */
+ uint64_t l2_fi_f : 1; /**< When set (1) and bit 17 of the USBN_INT_SUM
+ register is asserted the USBN will assert an
+ interrupt. */
+ uint64_t l2_fi_e : 1; /**< When set (1) and bit 16 of the USBN_INT_SUM
+ register is asserted the USBN will assert an
+ interrupt. */
+ uint64_t l2c_a_f : 1; /**< When set (1) and bit 15 of the USBN_INT_SUM
+ register is asserted the USBN will assert an
+ interrupt. */
+ uint64_t l2c_s_e : 1; /**< When set (1) and bit 14 of the USBN_INT_SUM
+ register is asserted the USBN will assert an
+ interrupt. */
+ uint64_t dcred_f : 1; /**< When set (1) and bit 13 of the USBN_INT_SUM
+ register is asserted the USBN will assert an
+ interrupt. */
+ uint64_t dcred_e : 1; /**< When set (1) and bit 12 of the USBN_INT_SUM
+ register is asserted the USBN will assert an
+ interrupt. */
+ uint64_t lt_pu_f : 1; /**< When set (1) and bit 11 of the USBN_INT_SUM
+ register is asserted the USBN will assert an
+ interrupt. */
+ uint64_t lt_po_e : 1; /**< When set (1) and bit 10 of the USBN_INT_SUM
+ register is asserted the USBN will assert an
+ interrupt. */
+ uint64_t nt_pu_f : 1; /**< When set (1) and bit 9 of the USBN_INT_SUM
+ register is asserted the USBN will assert an
+ interrupt. */
+ uint64_t nt_po_e : 1; /**< When set (1) and bit 8 of the USBN_INT_SUM
+ register is asserted the USBN will assert an
+ interrupt. */
+ uint64_t pt_pu_f : 1; /**< When set (1) and bit 7 of the USBN_INT_SUM
+ register is asserted the USBN will assert an
+ interrupt. */
+ uint64_t pt_po_e : 1; /**< When set (1) and bit 6 of the USBN_INT_SUM
+ register is asserted the USBN will assert an
+ interrupt. */
+ uint64_t lr_pu_f : 1; /**< When set (1) and bit 5 of the USBN_INT_SUM
+ register is asserted the USBN will assert an
+ interrupt. */
+ uint64_t lr_po_e : 1; /**< When set (1) and bit 4 of the USBN_INT_SUM
+ register is asserted the USBN will assert an
+ interrupt. */
+ uint64_t nr_pu_f : 1; /**< When set (1) and bit 3 of the USBN_INT_SUM
+ register is asserted the USBN will assert an
+ interrupt. */
+ uint64_t nr_po_e : 1; /**< When set (1) and bit 2 of the USBN_INT_SUM
+ register is asserted the USBN will assert an
+ interrupt. */
+ uint64_t pr_pu_f : 1; /**< When set (1) and bit 1 of the USBN_INT_SUM
+ register is asserted the USBN will assert an
+ interrupt. */
+ uint64_t pr_po_e : 1; /**< When set (1) and bit 0 of the USBN_INT_SUM
+ register is asserted the USBN will assert an
+ interrupt. */
+ } cn50xx;
+ struct cvmx_usbnx_int_enb_cn50xx cn52xx;
+ struct cvmx_usbnx_int_enb_cn50xx cn52xxp1;
+ struct cvmx_usbnx_int_enb_cn50xx cn56xx;
+ struct cvmx_usbnx_int_enb_cn50xx cn56xxp1;
+};
+typedef union cvmx_usbnx_int_enb cvmx_usbnx_int_enb_t;
+
+/**
+ * cvmx_usbn#_int_sum
+ *
+ * USBN_INT_SUM = USBN's Interrupt Summary Register
+ *
+ * Contains the diffrent interrupt summary bits of the USBN.
+ */
+union cvmx_usbnx_int_sum
+{
+ uint64_t u64;
+ struct cvmx_usbnx_int_sum_s
+ {
+ uint64_t reserved_38_63 : 26;
+ uint64_t nd4o_dpf : 1; /**< NCB DMA Out Data Fifo Push Full. */
+ uint64_t nd4o_dpe : 1; /**< NCB DMA Out Data Fifo Pop Empty. */
+ uint64_t nd4o_rpf : 1; /**< NCB DMA Out Request Fifo Push Full. */
+ uint64_t nd4o_rpe : 1; /**< NCB DMA Out Request Fifo Pop Empty. */
+ uint64_t ltl_f_pf : 1; /**< L2C Transfer Length Fifo Push Full. */
+ uint64_t ltl_f_pe : 1; /**< L2C Transfer Length Fifo Pop Empty. */
+ uint64_t u2n_c_pe : 1; /**< U2N Control Fifo Pop Empty. */
+ uint64_t u2n_c_pf : 1; /**< U2N Control Fifo Push Full. */
+ uint64_t u2n_d_pf : 1; /**< U2N Data Fifo Push Full. */
+ uint64_t u2n_d_pe : 1; /**< U2N Data Fifo Pop Empty. */
+ uint64_t n2u_pe : 1; /**< N2U Fifo Pop Empty. */
+ uint64_t n2u_pf : 1; /**< N2U Fifo Push Full. */
+ uint64_t uod_pf : 1; /**< UOD Fifo Push Full. */
+ uint64_t uod_pe : 1; /**< UOD Fifo Pop Empty. */
+ uint64_t rq_q3_e : 1; /**< Request Queue-3 Fifo Pushed When Full. */
+ uint64_t rq_q3_f : 1; /**< Request Queue-3 Fifo Pushed When Full. */
+ uint64_t rq_q2_e : 1; /**< Request Queue-2 Fifo Pushed When Full. */
+ uint64_t rq_q2_f : 1; /**< Request Queue-2 Fifo Pushed When Full. */
+ uint64_t rg_fi_f : 1; /**< Register Request Fifo Pushed When Full. */
+ uint64_t rg_fi_e : 1; /**< Register Request Fifo Pushed When Full. */
+ uint64_t lt_fi_f : 1; /**< L2C Request Fifo Pushed When Full. */
+ uint64_t lt_fi_e : 1; /**< L2C Request Fifo Pushed When Full. */
+ uint64_t l2c_a_f : 1; /**< L2C Credit Count Added When Full. */
+ uint64_t l2c_s_e : 1; /**< L2C Credit Count Subtracted When Empty. */
+ uint64_t dcred_f : 1; /**< Data CreditFifo Pushed When Full. */
+ uint64_t dcred_e : 1; /**< Data Credit Fifo Pushed When Full. */
+ uint64_t lt_pu_f : 1; /**< L2C Trasaction Fifo Pushed When Full. */
+ uint64_t lt_po_e : 1; /**< L2C Trasaction Fifo Popped When Full. */
+ uint64_t nt_pu_f : 1; /**< NPI Trasaction Fifo Pushed When Full. */
+ uint64_t nt_po_e : 1; /**< NPI Trasaction Fifo Popped When Full. */
+ uint64_t pt_pu_f : 1; /**< PP Trasaction Fifo Pushed When Full. */
+ uint64_t pt_po_e : 1; /**< PP Trasaction Fifo Popped When Full. */
+ uint64_t lr_pu_f : 1; /**< L2C Request Fifo Pushed When Full. */
+ uint64_t lr_po_e : 1; /**< L2C Request Fifo Popped When Empty. */
+ uint64_t nr_pu_f : 1; /**< NPI Request Fifo Pushed When Full. */
+ uint64_t nr_po_e : 1; /**< NPI Request Fifo Popped When Empty. */
+ uint64_t pr_pu_f : 1; /**< PP Request Fifo Pushed When Full. */
+ uint64_t pr_po_e : 1; /**< PP Request Fifo Popped When Empty. */
+ } s;
+ struct cvmx_usbnx_int_sum_s cn30xx;
+ struct cvmx_usbnx_int_sum_s cn31xx;
+ struct cvmx_usbnx_int_sum_cn50xx
+ {
+ uint64_t reserved_38_63 : 26;
+ uint64_t nd4o_dpf : 1; /**< NCB DMA Out Data Fifo Push Full. */
+ uint64_t nd4o_dpe : 1; /**< NCB DMA Out Data Fifo Pop Empty. */
+ uint64_t nd4o_rpf : 1; /**< NCB DMA Out Request Fifo Push Full. */
+ uint64_t nd4o_rpe : 1; /**< NCB DMA Out Request Fifo Pop Empty. */
+ uint64_t ltl_f_pf : 1; /**< L2C Transfer Length Fifo Push Full. */
+ uint64_t ltl_f_pe : 1; /**< L2C Transfer Length Fifo Pop Empty. */
+ uint64_t reserved_26_31 : 6;
+ uint64_t uod_pf : 1; /**< UOD Fifo Push Full. */
+ uint64_t uod_pe : 1; /**< UOD Fifo Pop Empty. */
+ uint64_t rq_q3_e : 1; /**< Request Queue-3 Fifo Pushed When Full. */
+ uint64_t rq_q3_f : 1; /**< Request Queue-3 Fifo Pushed When Full. */
+ uint64_t rq_q2_e : 1; /**< Request Queue-2 Fifo Pushed When Full. */
+ uint64_t rq_q2_f : 1; /**< Request Queue-2 Fifo Pushed When Full. */
+ uint64_t rg_fi_f : 1; /**< Register Request Fifo Pushed When Full. */
+ uint64_t rg_fi_e : 1; /**< Register Request Fifo Pushed When Full. */
+ uint64_t lt_fi_f : 1; /**< L2C Request Fifo Pushed When Full. */
+ uint64_t lt_fi_e : 1; /**< L2C Request Fifo Pushed When Full. */
+ uint64_t l2c_a_f : 1; /**< L2C Credit Count Added When Full. */
+ uint64_t l2c_s_e : 1; /**< L2C Credit Count Subtracted When Empty. */
+ uint64_t dcred_f : 1; /**< Data CreditFifo Pushed When Full. */
+ uint64_t dcred_e : 1; /**< Data Credit Fifo Pushed When Full. */
+ uint64_t lt_pu_f : 1; /**< L2C Trasaction Fifo Pushed When Full. */
+ uint64_t lt_po_e : 1; /**< L2C Trasaction Fifo Popped When Full. */
+ uint64_t nt_pu_f : 1; /**< NPI Trasaction Fifo Pushed When Full. */
+ uint64_t nt_po_e : 1; /**< NPI Trasaction Fifo Popped When Full. */
+ uint64_t pt_pu_f : 1; /**< PP Trasaction Fifo Pushed When Full. */
+ uint64_t pt_po_e : 1; /**< PP Trasaction Fifo Popped When Full. */
+ uint64_t lr_pu_f : 1; /**< L2C Request Fifo Pushed When Full. */
+ uint64_t lr_po_e : 1; /**< L2C Request Fifo Popped When Empty. */
+ uint64_t nr_pu_f : 1; /**< NPI Request Fifo Pushed When Full. */
+ uint64_t nr_po_e : 1; /**< NPI Request Fifo Popped When Empty. */
+ uint64_t pr_pu_f : 1; /**< PP Request Fifo Pushed When Full. */
+ uint64_t pr_po_e : 1; /**< PP Request Fifo Popped When Empty. */
+ } cn50xx;
+ struct cvmx_usbnx_int_sum_cn50xx cn52xx;
+ struct cvmx_usbnx_int_sum_cn50xx cn52xxp1;
+ struct cvmx_usbnx_int_sum_cn50xx cn56xx;
+ struct cvmx_usbnx_int_sum_cn50xx cn56xxp1;
+};
+typedef union cvmx_usbnx_int_sum cvmx_usbnx_int_sum_t;
+
+/**
+ * cvmx_usbn#_usbp_ctl_status
+ *
+ * USBN_USBP_CTL_STATUS = USBP Control And Status Register
+ *
+ * Contains general control and status information for the USBN block.
+ */
+union cvmx_usbnx_usbp_ctl_status
+{
+ uint64_t u64;
+ struct cvmx_usbnx_usbp_ctl_status_s
+ {
+ uint64_t txrisetune : 1; /**< HS Transmitter Rise/Fall Time Adjustment */
+ uint64_t txvreftune : 4; /**< HS DC Voltage Level Adjustment */
+ uint64_t txfslstune : 4; /**< FS/LS Source Impedence Adjustment */
+ uint64_t txhsxvtune : 2; /**< Transmitter High-Speed Crossover Adjustment */
+ uint64_t sqrxtune : 3; /**< Squelch Threshold Adjustment */
+ uint64_t compdistune : 3; /**< Disconnect Threshold Adjustment */
+ uint64_t otgtune : 3; /**< VBUS Valid Threshold Adjustment */
+ uint64_t otgdisable : 1; /**< OTG Block Disable */
+ uint64_t portreset : 1; /**< Per_Port Reset */
+ uint64_t drvvbus : 1; /**< Drive VBUS */
+ uint64_t lsbist : 1; /**< Low-Speed BIST Enable. */
+ uint64_t fsbist : 1; /**< Full-Speed BIST Enable. */
+ uint64_t hsbist : 1; /**< High-Speed BIST Enable. */
+ uint64_t bist_done : 1; /**< PHY Bist Done.
+ Asserted at the end of the PHY BIST sequence. */
+ uint64_t bist_err : 1; /**< PHY Bist Error.
+ Indicates an internal error was detected during
+ the BIST sequence. */
+ uint64_t tdata_out : 4; /**< PHY Test Data Out.
+ Presents either internaly generated signals or
+ test register contents, based upon the value of
+ test_data_out_sel. */
+ uint64_t siddq : 1; /**< Drives the USBP (USB-PHY) SIDDQ input.
+ Normally should be set to zero.
+ When customers have no intent to use USB PHY
+ interface, they should:
+ - still provide 3.3V to USB_VDD33, and
+ - tie USB_REXT to 3.3V supply, and
+ - set USBN*_USBP_CTL_STATUS[SIDDQ]=1 */
+ uint64_t txpreemphasistune : 1; /**< HS Transmitter Pre-Emphasis Enable */
+ uint64_t dma_bmode : 1; /**< When set to 1 the L2C DMA address will be updated
+ with byte-counts between packets. When set to 0
+ the L2C DMA address is incremented to the next
+ 4-byte aligned address after adding byte-count. */
+ uint64_t usbc_end : 1; /**< Bigendian input to the USB Core. This should be
+ set to '0' for operation. */
+ uint64_t usbp_bist : 1; /**< PHY, This is cleared '0' to run BIST on the USBP. */
+ uint64_t tclk : 1; /**< PHY Test Clock, used to load TDATA_IN to the USBP. */
+ uint64_t dp_pulld : 1; /**< PHY DP_PULLDOWN input to the USB-PHY.
+ This signal enables the pull-down resistance on
+ the D+ line. '1' pull down-resistance is connected
+ to D+/ '0' pull down resistance is not connected
+ to D+. When an A/B device is acting as a host
+ (downstream-facing port), dp_pulldown and
+ dm_pulldown are enabled. This must not toggle
+ during normal opeartion. */
+ uint64_t dm_pulld : 1; /**< PHY DM_PULLDOWN input to the USB-PHY.
+ This signal enables the pull-down resistance on
+ the D- line. '1' pull down-resistance is connected
+ to D-. '0' pull down resistance is not connected
+ to D-. When an A/B device is acting as a host
+ (downstream-facing port), dp_pulldown and
+ dm_pulldown are enabled. This must not toggle
+ during normal opeartion. */
+ uint64_t hst_mode : 1; /**< When '0' the USB is acting as HOST, when '1'
+ USB is acting as device. This field needs to be
+ set while the USB is in reset. */
+ uint64_t tuning : 4; /**< Transmitter Tuning for High-Speed Operation.
+ Tunes the current supply and rise/fall output
+ times for high-speed operation.
+ [20:19] == 11: Current supply increased
+ approximately 9%
+ [20:19] == 10: Current supply increased
+ approximately 4.5%
+ [20:19] == 01: Design default.
+ [20:19] == 00: Current supply decreased
+ approximately 4.5%
+ [22:21] == 11: Rise and fall times are increased.
+ [22:21] == 10: Design default.
+ [22:21] == 01: Rise and fall times are decreased.
+ [22:21] == 00: Rise and fall times are decreased
+ further as compared to the 01 setting. */
+ uint64_t tx_bs_enh : 1; /**< Transmit Bit Stuffing on [15:8].
+ Enables or disables bit stuffing on data[15:8]
+ when bit-stuffing is enabled. */
+ uint64_t tx_bs_en : 1; /**< Transmit Bit Stuffing on [7:0].
+ Enables or disables bit stuffing on data[7:0]
+ when bit-stuffing is enabled. */
+ uint64_t loop_enb : 1; /**< PHY Loopback Test Enable.
+ '1': During data transmission the receive is
+ enabled.
+ '0': During data transmission the receive is
+ disabled.
+ Must be '0' for normal operation. */
+ uint64_t vtest_enb : 1; /**< Analog Test Pin Enable.
+ '1' The PHY's analog_test pin is enabled for the
+ input and output of applicable analog test signals.
+ '0' THe analog_test pin is disabled. */
+ uint64_t bist_enb : 1; /**< Built-In Self Test Enable.
+ Used to activate BIST in the PHY. */
+ uint64_t tdata_sel : 1; /**< Test Data Out Select.
+ '1' test_data_out[3:0] (PHY) register contents
+ are output. '0' internaly generated signals are
+ output. */
+ uint64_t taddr_in : 4; /**< Mode Address for Test Interface.
+ Specifies the register address for writing to or
+ reading from the PHY test interface register. */
+ uint64_t tdata_in : 8; /**< Internal Testing Register Input Data and Select
+ This is a test bus. Data is present on [3:0],
+ and its corresponding select (enable) is present
+ on bits [7:4]. */
+ uint64_t ate_reset : 1; /**< Reset input from automatic test equipment.
+ This is a test signal. When the USB Core is
+ powered up (not in Susned Mode), an automatic
+ tester can use this to disable phy_clock and
+ free_clk, then re-eanable them with an aligned
+ phase.
+ '1': The phy_clk and free_clk outputs are
+ disabled. "0": The phy_clock and free_clk outputs
+ are available within a specific period after the
+ de-assertion. */
+ } s;
+ struct cvmx_usbnx_usbp_ctl_status_cn30xx
+ {
+ uint64_t reserved_38_63 : 26;
+ uint64_t bist_done : 1; /**< PHY Bist Done.
+ Asserted at the end of the PHY BIST sequence. */
+ uint64_t bist_err : 1; /**< PHY Bist Error.
+ Indicates an internal error was detected during
+ the BIST sequence. */
+ uint64_t tdata_out : 4; /**< PHY Test Data Out.
+ Presents either internaly generated signals or
+ test register contents, based upon the value of
+ test_data_out_sel. */
+ uint64_t reserved_30_31 : 2;
+ uint64_t dma_bmode : 1; /**< When set to 1 the L2C DMA address will be updated
+ with byte-counts between packets. When set to 0
+ the L2C DMA address is incremented to the next
+ 4-byte aligned address after adding byte-count. */
+ uint64_t usbc_end : 1; /**< Bigendian input to the USB Core. This should be
+ set to '0' for operation. */
+ uint64_t usbp_bist : 1; /**< PHY, This is cleared '0' to run BIST on the USBP. */
+ uint64_t tclk : 1; /**< PHY Test Clock, used to load TDATA_IN to the USBP. */
+ uint64_t dp_pulld : 1; /**< PHY DP_PULLDOWN input to the USB-PHY.
+ This signal enables the pull-down resistance on
+ the D+ line. '1' pull down-resistance is connected
+ to D+/ '0' pull down resistance is not connected
+ to D+. When an A/B device is acting as a host
+ (downstream-facing port), dp_pulldown and
+ dm_pulldown are enabled. This must not toggle
+ during normal opeartion. */
+ uint64_t dm_pulld : 1; /**< PHY DM_PULLDOWN input to the USB-PHY.
+ This signal enables the pull-down resistance on
+ the D- line. '1' pull down-resistance is connected
+ to D-. '0' pull down resistance is not connected
+ to D-. When an A/B device is acting as a host
+ (downstream-facing port), dp_pulldown and
+ dm_pulldown are enabled. This must not toggle
+ during normal opeartion. */
+ uint64_t hst_mode : 1; /**< When '0' the USB is acting as HOST, when '1'
+ USB is acting as device. This field needs to be
+ set while the USB is in reset. */
+ uint64_t tuning : 4; /**< Transmitter Tuning for High-Speed Operation.
+ Tunes the current supply and rise/fall output
+ times for high-speed operation.
+ [20:19] == 11: Current supply increased
+ approximately 9%
+ [20:19] == 10: Current supply increased
+ approximately 4.5%
+ [20:19] == 01: Design default.
+ [20:19] == 00: Current supply decreased
+ approximately 4.5%
+ [22:21] == 11: Rise and fall times are increased.
+ [22:21] == 10: Design default.
+ [22:21] == 01: Rise and fall times are decreased.
+ [22:21] == 00: Rise and fall times are decreased
+ further as compared to the 01 setting. */
+ uint64_t tx_bs_enh : 1; /**< Transmit Bit Stuffing on [15:8].
+ Enables or disables bit stuffing on data[15:8]
+ when bit-stuffing is enabled. */
+ uint64_t tx_bs_en : 1; /**< Transmit Bit Stuffing on [7:0].
+ Enables or disables bit stuffing on data[7:0]
+ when bit-stuffing is enabled. */
+ uint64_t loop_enb : 1; /**< PHY Loopback Test Enable.
+ '1': During data transmission the receive is
+ enabled.
+ '0': During data transmission the receive is
+ disabled.
+ Must be '0' for normal operation. */
+ uint64_t vtest_enb : 1; /**< Analog Test Pin Enable.
+ '1' The PHY's analog_test pin is enabled for the
+ input and output of applicable analog test signals.
+ '0' THe analog_test pin is disabled. */
+ uint64_t bist_enb : 1; /**< Built-In Self Test Enable.
+ Used to activate BIST in the PHY. */
+ uint64_t tdata_sel : 1; /**< Test Data Out Select.
+ '1' test_data_out[3:0] (PHY) register contents
+ are output. '0' internaly generated signals are
+ output. */
+ uint64_t taddr_in : 4; /**< Mode Address for Test Interface.
+ Specifies the register address for writing to or
+ reading from the PHY test interface register. */
+ uint64_t tdata_in : 8; /**< Internal Testing Register Input Data and Select
+ This is a test bus. Data is present on [3:0],
+ and its corresponding select (enable) is present
+ on bits [7:4]. */
+ uint64_t ate_reset : 1; /**< Reset input from automatic test equipment.
+ This is a test signal. When the USB Core is
+ powered up (not in Susned Mode), an automatic
+ tester can use this to disable phy_clock and
+ free_clk, then re-eanable them with an aligned
+ phase.
+ '1': The phy_clk and free_clk outputs are
+ disabled. "0": The phy_clock and free_clk outputs
+ are available within a specific period after the
+ de-assertion. */
+ } cn30xx;
+ struct cvmx_usbnx_usbp_ctl_status_cn30xx cn31xx;
+ struct cvmx_usbnx_usbp_ctl_status_cn50xx
+ {
+ uint64_t txrisetune : 1; /**< HS Transmitter Rise/Fall Time Adjustment */
+ uint64_t txvreftune : 4; /**< HS DC Voltage Level Adjustment */
+ uint64_t txfslstune : 4; /**< FS/LS Source Impedence Adjustment */
+ uint64_t txhsxvtune : 2; /**< Transmitter High-Speed Crossover Adjustment */
+ uint64_t sqrxtune : 3; /**< Squelch Threshold Adjustment */
+ uint64_t compdistune : 3; /**< Disconnect Threshold Adjustment */
+ uint64_t otgtune : 3; /**< VBUS Valid Threshold Adjustment */
+ uint64_t otgdisable : 1; /**< OTG Block Disable */
+ uint64_t portreset : 1; /**< Per_Port Reset */
+ uint64_t drvvbus : 1; /**< Drive VBUS */
+ uint64_t lsbist : 1; /**< Low-Speed BIST Enable. */
+ uint64_t fsbist : 1; /**< Full-Speed BIST Enable. */
+ uint64_t hsbist : 1; /**< High-Speed BIST Enable. */
+ uint64_t bist_done : 1; /**< PHY Bist Done.
+ Asserted at the end of the PHY BIST sequence. */
+ uint64_t bist_err : 1; /**< PHY Bist Error.
+ Indicates an internal error was detected during
+ the BIST sequence. */
+ uint64_t tdata_out : 4; /**< PHY Test Data Out.
+ Presents either internaly generated signals or
+ test register contents, based upon the value of
+ test_data_out_sel. */
+ uint64_t reserved_31_31 : 1;
+ uint64_t txpreemphasistune : 1; /**< HS Transmitter Pre-Emphasis Enable */
+ uint64_t dma_bmode : 1; /**< When set to 1 the L2C DMA address will be updated
+ with byte-counts between packets. When set to 0
+ the L2C DMA address is incremented to the next
+ 4-byte aligned address after adding byte-count. */
+ uint64_t usbc_end : 1; /**< Bigendian input to the USB Core. This should be
+ set to '0' for operation. */
+ uint64_t usbp_bist : 1; /**< PHY, This is cleared '0' to run BIST on the USBP. */
+ uint64_t tclk : 1; /**< PHY Test Clock, used to load TDATA_IN to the USBP. */
+ uint64_t dp_pulld : 1; /**< PHY DP_PULLDOWN input to the USB-PHY.
+ This signal enables the pull-down resistance on
+ the D+ line. '1' pull down-resistance is connected
+ to D+/ '0' pull down resistance is not connected
+ to D+. When an A/B device is acting as a host
+ (downstream-facing port), dp_pulldown and
+ dm_pulldown are enabled. This must not toggle
+ during normal opeartion. */
+ uint64_t dm_pulld : 1; /**< PHY DM_PULLDOWN input to the USB-PHY.
+ This signal enables the pull-down resistance on
+ the D- line. '1' pull down-resistance is connected
+ to D-. '0' pull down resistance is not connected
+ to D-. When an A/B device is acting as a host
+ (downstream-facing port), dp_pulldown and
+ dm_pulldown are enabled. This must not toggle
+ during normal opeartion. */
+ uint64_t hst_mode : 1; /**< When '0' the USB is acting as HOST, when '1'
+ USB is acting as device. This field needs to be
+ set while the USB is in reset. */
+ uint64_t reserved_19_22 : 4;
+ uint64_t tx_bs_enh : 1; /**< Transmit Bit Stuffing on [15:8].
+ Enables or disables bit stuffing on data[15:8]
+ when bit-stuffing is enabled. */
+ uint64_t tx_bs_en : 1; /**< Transmit Bit Stuffing on [7:0].
+ Enables or disables bit stuffing on data[7:0]
+ when bit-stuffing is enabled. */
+ uint64_t loop_enb : 1; /**< PHY Loopback Test Enable.
+ '1': During data transmission the receive is
+ enabled.
+ '0': During data transmission the receive is
+ disabled.
+ Must be '0' for normal operation. */
+ uint64_t vtest_enb : 1; /**< Analog Test Pin Enable.
+ '1' The PHY's analog_test pin is enabled for the
+ input and output of applicable analog test signals.
+ '0' THe analog_test pin is disabled. */
+ uint64_t bist_enb : 1; /**< Built-In Self Test Enable.
+ Used to activate BIST in the PHY. */
+ uint64_t tdata_sel : 1; /**< Test Data Out Select.
+ '1' test_data_out[3:0] (PHY) register contents
+ are output. '0' internaly generated signals are
+ output. */
+ uint64_t taddr_in : 4; /**< Mode Address for Test Interface.
+ Specifies the register address for writing to or
+ reading from the PHY test interface register. */
+ uint64_t tdata_in : 8; /**< Internal Testing Register Input Data and Select
+ This is a test bus. Data is present on [3:0],
+ and its corresponding select (enable) is present
+ on bits [7:4]. */
+ uint64_t ate_reset : 1; /**< Reset input from automatic test equipment.
+ This is a test signal. When the USB Core is
+ powered up (not in Susned Mode), an automatic
+ tester can use this to disable phy_clock and
+ free_clk, then re-eanable them with an aligned
+ phase.
+ '1': The phy_clk and free_clk outputs are
+ disabled. "0": The phy_clock and free_clk outputs
+ are available within a specific period after the
+ de-assertion. */
+ } cn50xx;
+ struct cvmx_usbnx_usbp_ctl_status_cn52xx
+ {
+ uint64_t txrisetune : 1; /**< HS Transmitter Rise/Fall Time Adjustment */
+ uint64_t txvreftune : 4; /**< HS DC Voltage Level Adjustment */
+ uint64_t txfslstune : 4; /**< FS/LS Source Impedence Adjustment */
+ uint64_t txhsxvtune : 2; /**< Transmitter High-Speed Crossover Adjustment */
+ uint64_t sqrxtune : 3; /**< Squelch Threshold Adjustment */
+ uint64_t compdistune : 3; /**< Disconnect Threshold Adjustment */
+ uint64_t otgtune : 3; /**< VBUS Valid Threshold Adjustment */
+ uint64_t otgdisable : 1; /**< OTG Block Disable */
+ uint64_t portreset : 1; /**< Per_Port Reset */
+ uint64_t drvvbus : 1; /**< Drive VBUS */
+ uint64_t lsbist : 1; /**< Low-Speed BIST Enable. */
+ uint64_t fsbist : 1; /**< Full-Speed BIST Enable. */
+ uint64_t hsbist : 1; /**< High-Speed BIST Enable. */
+ uint64_t bist_done : 1; /**< PHY Bist Done.
+ Asserted at the end of the PHY BIST sequence. */
+ uint64_t bist_err : 1; /**< PHY Bist Error.
+ Indicates an internal error was detected during
+ the BIST sequence. */
+ uint64_t tdata_out : 4; /**< PHY Test Data Out.
+ Presents either internaly generated signals or
+ test register contents, based upon the value of
+ test_data_out_sel. */
+ uint64_t siddq : 1; /**< Drives the USBP (USB-PHY) SIDDQ input.
+ Normally should be set to zero.
+ When customers have no intent to use USB PHY
+ interface, they should:
+ - still provide 3.3V to USB_VDD33, and
+ - tie USB_REXT to 3.3V supply, and
+ - set USBN*_USBP_CTL_STATUS[SIDDQ]=1 */
+ uint64_t txpreemphasistune : 1; /**< HS Transmitter Pre-Emphasis Enable */
+ uint64_t dma_bmode : 1; /**< When set to 1 the L2C DMA address will be updated
+ with byte-counts between packets. When set to 0
+ the L2C DMA address is incremented to the next
+ 4-byte aligned address after adding byte-count. */
+ uint64_t usbc_end : 1; /**< Bigendian input to the USB Core. This should be
+ set to '0' for operation. */
+ uint64_t usbp_bist : 1; /**< PHY, This is cleared '0' to run BIST on the USBP. */
+ uint64_t tclk : 1; /**< PHY Test Clock, used to load TDATA_IN to the USBP. */
+ uint64_t dp_pulld : 1; /**< PHY DP_PULLDOWN input to the USB-PHY.
+ This signal enables the pull-down resistance on
+ the D+ line. '1' pull down-resistance is connected
+ to D+/ '0' pull down resistance is not connected
+ to D+. When an A/B device is acting as a host
+ (downstream-facing port), dp_pulldown and
+ dm_pulldown are enabled. This must not toggle
+ during normal opeartion. */
+ uint64_t dm_pulld : 1; /**< PHY DM_PULLDOWN input to the USB-PHY.
+ This signal enables the pull-down resistance on
+ the D- line. '1' pull down-resistance is connected
+ to D-. '0' pull down resistance is not connected
+ to D-. When an A/B device is acting as a host
+ (downstream-facing port), dp_pulldown and
+ dm_pulldown are enabled. This must not toggle
+ during normal opeartion. */
+ uint64_t hst_mode : 1; /**< When '0' the USB is acting as HOST, when '1'
+ USB is acting as device. This field needs to be
+ set while the USB is in reset. */
+ uint64_t reserved_19_22 : 4;
+ uint64_t tx_bs_enh : 1; /**< Transmit Bit Stuffing on [15:8].
+ Enables or disables bit stuffing on data[15:8]
+ when bit-stuffing is enabled. */
+ uint64_t tx_bs_en : 1; /**< Transmit Bit Stuffing on [7:0].
+ Enables or disables bit stuffing on data[7:0]
+ when bit-stuffing is enabled. */
+ uint64_t loop_enb : 1; /**< PHY Loopback Test Enable.
+ '1': During data transmission the receive is
+ enabled.
+ '0': During data transmission the receive is
+ disabled.
+ Must be '0' for normal operation. */
+ uint64_t vtest_enb : 1; /**< Analog Test Pin Enable.
+ '1' The PHY's analog_test pin is enabled for the
+ input and output of applicable analog test signals.
+ '0' THe analog_test pin is disabled. */
+ uint64_t bist_enb : 1; /**< Built-In Self Test Enable.
+ Used to activate BIST in the PHY. */
+ uint64_t tdata_sel : 1; /**< Test Data Out Select.
+ '1' test_data_out[3:0] (PHY) register contents
+ are output. '0' internaly generated signals are
+ output. */
+ uint64_t taddr_in : 4; /**< Mode Address for Test Interface.
+ Specifies the register address for writing to or
+ reading from the PHY test interface register. */
+ uint64_t tdata_in : 8; /**< Internal Testing Register Input Data and Select
+ This is a test bus. Data is present on [3:0],
+ and its corresponding select (enable) is present
+ on bits [7:4]. */
+ uint64_t ate_reset : 1; /**< Reset input from automatic test equipment.
+ This is a test signal. When the USB Core is
+ powered up (not in Susned Mode), an automatic
+ tester can use this to disable phy_clock and
+ free_clk, then re-eanable them with an aligned
+ phase.
+ '1': The phy_clk and free_clk outputs are
+ disabled. "0": The phy_clock and free_clk outputs
+ are available within a specific period after the
+ de-assertion. */
+ } cn52xx;
+ struct cvmx_usbnx_usbp_ctl_status_cn50xx cn52xxp1;
+ struct cvmx_usbnx_usbp_ctl_status_cn52xx cn56xx;
+ struct cvmx_usbnx_usbp_ctl_status_cn50xx cn56xxp1;
+};
+typedef union cvmx_usbnx_usbp_ctl_status cvmx_usbnx_usbp_ctl_status_t;
+
+#endif
--- /dev/null
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 Cavium Networks
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/platform_device.h>
+#include <linux/usb.h>
+
+#include <asm/time.h>
+#include <asm/delay.h>
+
+#include <asm/octeon/cvmx.h>
+#include "cvmx-usb.h"
+#include <asm/octeon/cvmx-iob-defs.h>
+
+#include <linux/usb/hcd.h>
+
+//#define DEBUG_CALL(format, ...) printk(format, ##__VA_ARGS__)
+#define DEBUG_CALL(format, ...) do {} while (0)
+//#define DEBUG_SUBMIT(format, ...) printk(format, ##__VA_ARGS__)
+#define DEBUG_SUBMIT(format, ...) do {} while (0)
+//#define DEBUG_ROOT_HUB(format, ...) printk(format, ##__VA_ARGS__)
+#define DEBUG_ROOT_HUB(format, ...) do {} while (0)
+//#define DEBUG_ERROR(format, ...) printk(format, ##__VA_ARGS__)
+#define DEBUG_ERROR(format, ...) do {} while (0)
+#define DEBUG_FATAL(format, ...) printk(format, ##__VA_ARGS__)
+
+struct octeon_hcd {
+ spinlock_t lock;
+ cvmx_usb_state_t usb;
+ struct tasklet_struct dequeue_tasklet;
+ struct list_head dequeue_list;
+};
+
+/* convert between an HCD pointer and the corresponding struct octeon_hcd */
+static inline struct octeon_hcd *hcd_to_octeon(struct usb_hcd *hcd)
+{
+ return (struct octeon_hcd *)(hcd->hcd_priv);
+}
+
+static inline struct usb_hcd *octeon_to_hcd(struct octeon_hcd *p)
+{
+ return container_of((void *)p, struct usb_hcd, hcd_priv);
+}
+
+static inline struct octeon_hcd *cvmx_usb_to_octeon(cvmx_usb_state_t *p)
+{
+ return container_of(p, struct octeon_hcd, usb);
+}
+
+static irqreturn_t octeon_usb_irq(struct usb_hcd *hcd)
+{
+ struct octeon_hcd *priv = hcd_to_octeon(hcd);
+ unsigned long flags;
+ DEBUG_CALL("OcteonUSB: %s called\n", __FUNCTION__);
+ spin_lock_irqsave(&priv->lock, flags);
+ cvmx_usb_poll(&priv->usb);
+ spin_unlock_irqrestore(&priv->lock, flags);
+ return IRQ_HANDLED;
+}
+
+static void octeon_usb_port_callback(cvmx_usb_state_t *usb,
+ cvmx_usb_callback_t reason,
+ cvmx_usb_complete_t status,
+ int pipe_handle,
+ int submit_handle,
+ int bytes_transferred,
+ void *user_data)
+{
+ struct octeon_hcd *priv = cvmx_usb_to_octeon(usb);
+ DEBUG_CALL("OcteonUSB: %s called\n", __FUNCTION__);
+ spin_unlock(&priv->lock);
+ usb_hcd_poll_rh_status(octeon_to_hcd(priv));
+ spin_lock(&priv->lock);
+}
+
+static int octeon_usb_start(struct usb_hcd *hcd)
+{
+ struct octeon_hcd *priv = hcd_to_octeon(hcd);
+ unsigned long flags;
+ DEBUG_CALL("OcteonUSB: %s called\n", __FUNCTION__);
+ hcd->state = HC_STATE_RUNNING;
+ spin_lock_irqsave(&priv->lock, flags);
+ cvmx_usb_register_callback(&priv->usb, CVMX_USB_CALLBACK_PORT_CHANGED,
+ octeon_usb_port_callback, NULL);
+ spin_unlock_irqrestore(&priv->lock, flags);
+ return 0;
+}
+
+static void octeon_usb_stop(struct usb_hcd *hcd)
+{
+ struct octeon_hcd *priv = hcd_to_octeon(hcd);
+ unsigned long flags;
+ DEBUG_CALL("OcteonUSB: %s called\n", __FUNCTION__);
+ spin_lock_irqsave(&priv->lock, flags);
+ cvmx_usb_register_callback(&priv->usb, CVMX_USB_CALLBACK_PORT_CHANGED,
+ NULL, NULL);
+ spin_unlock_irqrestore(&priv->lock, flags);
+ hcd->state = HC_STATE_HALT;
+}
+
+static int octeon_usb_get_frame_number(struct usb_hcd *hcd)
+{
+ struct octeon_hcd *priv = hcd_to_octeon(hcd);
+ DEBUG_CALL("OcteonUSB: %s called\n", __FUNCTION__);
+ return cvmx_usb_get_frame_number(&priv->usb);
+}
+
+static void octeon_usb_urb_complete_callback(cvmx_usb_state_t *usb,
+ cvmx_usb_callback_t reason,
+ cvmx_usb_complete_t status,
+ int pipe_handle,
+ int submit_handle,
+ int bytes_transferred,
+ void *user_data)
+{
+ struct octeon_hcd *priv = cvmx_usb_to_octeon(usb);
+ struct urb *urb = user_data;
+ DEBUG_CALL("OcteonUSB: %s called\n", __FUNCTION__);
+ urb->actual_length = bytes_transferred;
+ urb->hcpriv = NULL;
+
+ if (!list_empty(&urb->urb_list)) {
+ /*
+ * It is on the dequeue_list, but we are going to call
+ * usb_hcd_giveback_urb(), so we must clear it from
+ * the list. We got to it before the
+ * octeon_usb_urb_dequeue_work() tasklet did.
+ */
+ list_del(&urb->urb_list);
+ /* No longer on the dequeue_list. */
+ INIT_LIST_HEAD(&urb->urb_list);
+ }
+
+ /* For Isochronous transactions we need to update the URB packet status
+ list from data in our private copy */
+ if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS)
+ {
+ int i;
+ /* The pointer to the private list is stored in the setup_packet field */
+ cvmx_usb_iso_packet_t *iso_packet = (cvmx_usb_iso_packet_t *)urb->setup_packet;
+ /* Recalculate the transfer size by adding up each packet */
+ urb->actual_length = 0;
+ for (i=0; i<urb->number_of_packets; i++)
+ {
+ if (iso_packet[i].status == CVMX_USB_COMPLETE_SUCCESS)
+ {
+ urb->iso_frame_desc[i].status = 0;
+ urb->iso_frame_desc[i].actual_length = iso_packet[i].length;
+ urb->actual_length += urb->iso_frame_desc[i].actual_length;
+ }
+ else
+ {
+ DEBUG_ERROR("%s: ISOCHRONOUS packet=%d of %d status=%d pipe=%d submit=%d size=%d\n",
+ __FUNCTION__, i, urb->number_of_packets,
+ iso_packet[i].status, pipe_handle,
+ submit_handle, iso_packet[i].length);
+ urb->iso_frame_desc[i].status = -EREMOTEIO;
+ }
+ }
+ /* Free the private list now that we don't need it anymore */
+ kfree(iso_packet);
+ urb->setup_packet = NULL;
+ }
+
+ switch (status)
+ {
+ case CVMX_USB_COMPLETE_SUCCESS:
+ urb->status = 0;
+ break;
+ case CVMX_USB_COMPLETE_CANCEL:
+ if (urb->status == 0)
+ urb->status = -ENOENT;
+ break;
+ case CVMX_USB_COMPLETE_STALL:
+ DEBUG_ERROR("%s: status=stall pipe=%d submit=%d size=%d\n", __FUNCTION__, pipe_handle, submit_handle, bytes_transferred);
+ urb->status = -EPIPE;
+ break;
+ case CVMX_USB_COMPLETE_BABBLEERR:
+ DEBUG_ERROR("%s: status=babble pipe=%d submit=%d size=%d\n", __FUNCTION__, pipe_handle, submit_handle, bytes_transferred);
+ urb->status = -EPIPE;
+ break;
+ case CVMX_USB_COMPLETE_SHORT:
+ DEBUG_ERROR("%s: status=short pipe=%d submit=%d size=%d\n", __FUNCTION__, pipe_handle, submit_handle, bytes_transferred);
+ urb->status = -EREMOTEIO;
+ break;
+ case CVMX_USB_COMPLETE_ERROR:
+ case CVMX_USB_COMPLETE_XACTERR:
+ case CVMX_USB_COMPLETE_DATATGLERR:
+ case CVMX_USB_COMPLETE_FRAMEERR:
+ DEBUG_ERROR("%s: status=%d pipe=%d submit=%d size=%d\n", __FUNCTION__, status, pipe_handle, submit_handle, bytes_transferred);
+ urb->status = -EPROTO;
+ break;
+ }
+ spin_unlock(&priv->lock);
+ usb_hcd_giveback_urb(octeon_to_hcd(priv), urb, urb->status);
+ spin_lock(&priv->lock);
+}
+
+static int octeon_usb_urb_enqueue(struct usb_hcd *hcd,
+ struct urb *urb,
+ gfp_t mem_flags)
+{
+ struct octeon_hcd *priv = hcd_to_octeon(hcd);
+ int submit_handle = -1;
+ int pipe_handle;
+ unsigned long flags;
+ cvmx_usb_iso_packet_t *iso_packet;
+ struct usb_host_endpoint *ep = urb->ep;
+
+ DEBUG_CALL("OcteonUSB: %s called\n", __FUNCTION__);
+
+ urb->status = 0;
+ INIT_LIST_HEAD(&urb->urb_list); /* not enqueued on dequeue_list */
+ spin_lock_irqsave(&priv->lock, flags);
+
+ if (!ep->hcpriv)
+ {
+ cvmx_usb_transfer_t transfer_type;
+ cvmx_usb_speed_t speed;
+ int split_device = 0;
+ int split_port = 0;
+ switch (usb_pipetype(urb->pipe))
+ {
+ case PIPE_ISOCHRONOUS:
+ transfer_type = CVMX_USB_TRANSFER_ISOCHRONOUS;
+ break;
+ case PIPE_INTERRUPT:
+ transfer_type = CVMX_USB_TRANSFER_INTERRUPT;
+ break;
+ case PIPE_CONTROL:
+ transfer_type = CVMX_USB_TRANSFER_CONTROL;
+ break;
+ default:
+ transfer_type = CVMX_USB_TRANSFER_BULK;
+ break;
+ }
+ switch (urb->dev->speed)
+ {
+ case USB_SPEED_LOW:
+ speed = CVMX_USB_SPEED_LOW;
+ break;
+ case USB_SPEED_FULL:
+ speed = CVMX_USB_SPEED_FULL;
+ break;
+ default:
+ speed = CVMX_USB_SPEED_HIGH;
+ break;
+ }
+ /* For slow devices on high speed ports we need to find the hub that
+ does the speed translation so we know where to send the split
+ transactions */
+ if (speed != CVMX_USB_SPEED_HIGH)
+ {
+ /* Start at this device and work our way up the usb tree */
+ struct usb_device *dev = urb->dev;
+ while (dev->parent)
+ {
+ /* If our parent is high speed then he'll receive the splits */
+ if (dev->parent->speed == USB_SPEED_HIGH)
+ {
+ split_device = dev->parent->devnum;
+ split_port = dev->portnum;
+ break;
+ }
+ /* Move up the tree one level. If we make it all the way up the
+ tree, then the port must not be in high speed mode and we
+ don't need a split */
+ dev = dev->parent;
+ }
+ }
+ pipe_handle = cvmx_usb_open_pipe(&priv->usb,
+ 0,
+ usb_pipedevice(urb->pipe),
+ usb_pipeendpoint(urb->pipe),
+ speed,
+ le16_to_cpu(ep->desc.wMaxPacketSize) & 0x7ff,
+ transfer_type,
+ usb_pipein(urb->pipe) ? CVMX_USB_DIRECTION_IN : CVMX_USB_DIRECTION_OUT,
+ urb->interval,
+ (le16_to_cpu(ep->desc.wMaxPacketSize)>>11) & 0x3,
+ split_device,
+ split_port);
+ if (pipe_handle < 0)
+ {
+ spin_unlock_irqrestore(&priv->lock, flags);
+ DEBUG_ERROR("OcteonUSB: %s failed to create pipe\n", __FUNCTION__);
+ return -ENOMEM;
+ }
+ ep->hcpriv = (void*)(0x10000L + pipe_handle);
+ }
+ else
+ pipe_handle = 0xffff & (long)ep->hcpriv;
+
+ switch (usb_pipetype(urb->pipe))
+ {
+ case PIPE_ISOCHRONOUS:
+ DEBUG_SUBMIT("OcteonUSB: %s submit isochronous to %d.%d\n", __FUNCTION__, usb_pipedevice(urb->pipe), usb_pipeendpoint(urb->pipe));
+ /* Allocate a structure to use for our private list of isochronous
+ packets */
+ iso_packet = kmalloc(urb->number_of_packets * sizeof(cvmx_usb_iso_packet_t), GFP_ATOMIC);
+ if (iso_packet)
+ {
+ int i;
+ /* Fill the list with the data from the URB */
+ for (i=0; i<urb->number_of_packets; i++)
+ {
+ iso_packet[i].offset = urb->iso_frame_desc[i].offset;
+ iso_packet[i].length = urb->iso_frame_desc[i].length;
+ iso_packet[i].status = CVMX_USB_COMPLETE_ERROR;
+ }
+ /* Store a pointer to the list in uthe URB setup_pakcet field.
+ We know this currently isn't being used and this saves us
+ a bunch of logic */
+ urb->setup_packet = (char*)iso_packet;
+ submit_handle = cvmx_usb_submit_isochronous(&priv->usb, pipe_handle,
+ urb->start_frame,
+ 0 /* flags */,
+ urb->number_of_packets,
+ iso_packet,
+ urb->transfer_dma,
+ urb->transfer_buffer_length,
+ octeon_usb_urb_complete_callback,
+ urb);
+ /* If submit failed we need to free our private packet list */
+ if (submit_handle < 0)
+ {
+ urb->setup_packet = NULL;
+ kfree(iso_packet);
+ }
+ }
+ break;
+ case PIPE_INTERRUPT:
+ DEBUG_SUBMIT("OcteonUSB: %s submit interrupt to %d.%d\n", __FUNCTION__, usb_pipedevice(urb->pipe), usb_pipeendpoint(urb->pipe));
+ submit_handle = cvmx_usb_submit_interrupt(&priv->usb, pipe_handle,
+ urb->transfer_dma,
+ urb->transfer_buffer_length,
+ octeon_usb_urb_complete_callback,
+ urb);
+ break;
+ case PIPE_CONTROL:
+ DEBUG_SUBMIT("OcteonUSB: %s submit control to %d.%d\n", __FUNCTION__, usb_pipedevice(urb->pipe), usb_pipeendpoint(urb->pipe));
+ submit_handle = cvmx_usb_submit_control(&priv->usb, pipe_handle,
+ urb->setup_dma,
+ urb->transfer_dma,
+ urb->transfer_buffer_length,
+ octeon_usb_urb_complete_callback,
+ urb);
+ break;
+ case PIPE_BULK:
+ DEBUG_SUBMIT("OcteonUSB: %s submit bulk to %d.%d\n", __FUNCTION__, usb_pipedevice(urb->pipe), usb_pipeendpoint(urb->pipe));
+ submit_handle = cvmx_usb_submit_bulk(&priv->usb, pipe_handle,
+ urb->transfer_dma,
+ urb->transfer_buffer_length,
+ octeon_usb_urb_complete_callback,
+ urb);
+ break;
+ }
+ if (submit_handle < 0)
+ {
+ spin_unlock_irqrestore(&priv->lock, flags);
+ DEBUG_ERROR("OcteonUSB: %s failed to submit\n", __FUNCTION__);
+ return -ENOMEM;
+ }
+ urb->hcpriv = (void*)(long)(((submit_handle & 0xffff) << 16) | pipe_handle);
+ spin_unlock_irqrestore(&priv->lock, flags);
+ return 0;
+}
+
+static void octeon_usb_urb_dequeue_work(unsigned long arg)
+{
+ unsigned long flags;
+ struct octeon_hcd *priv = (struct octeon_hcd *)arg;
+
+ spin_lock_irqsave(&priv->lock, flags);
+
+ while (!list_empty(&priv->dequeue_list)) {
+ int pipe_handle;
+ int submit_handle;
+ struct urb *urb = container_of(priv->dequeue_list.next, struct urb, urb_list);
+ list_del(&urb->urb_list);
+ /* not enqueued on dequeue_list */
+ INIT_LIST_HEAD(&urb->urb_list);
+ pipe_handle = 0xffff & (long)urb->hcpriv;
+ submit_handle = ((long)urb->hcpriv) >> 16;
+ cvmx_usb_cancel(&priv->usb, pipe_handle, submit_handle);
+ }
+
+ spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+static int octeon_usb_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
+{
+ struct octeon_hcd *priv = hcd_to_octeon(hcd);
+ unsigned long flags;
+
+ DEBUG_CALL("OcteonUSB: %s called\n", __FUNCTION__);
+
+ if (!urb->dev)
+ return -EINVAL;
+
+ spin_lock_irqsave(&priv->lock, flags);
+
+ urb->status = status;
+ list_add_tail(&urb->urb_list, &priv->dequeue_list);
+
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ tasklet_schedule(&priv->dequeue_tasklet);
+
+ return 0;
+}
+
+static void octeon_usb_endpoint_disable(struct usb_hcd *hcd, struct usb_host_endpoint *ep)
+{
+ DEBUG_CALL("OcteonUSB: %s called\n", __FUNCTION__);
+ if (ep->hcpriv)
+ {
+ struct octeon_hcd *priv = hcd_to_octeon(hcd);
+ int pipe_handle = 0xffff & (long)ep->hcpriv;
+ unsigned long flags;
+ spin_lock_irqsave(&priv->lock, flags);
+ cvmx_usb_cancel_all(&priv->usb, pipe_handle);
+ if (cvmx_usb_close_pipe(&priv->usb, pipe_handle))
+ DEBUG_ERROR("OcteonUSB: Closing pipe %d failed\n", pipe_handle);
+ spin_unlock_irqrestore(&priv->lock, flags);
+ ep->hcpriv = NULL;
+ }
+}
+
+static int octeon_usb_hub_status_data(struct usb_hcd *hcd, char *buf)
+{
+ struct octeon_hcd *priv = hcd_to_octeon(hcd);
+ cvmx_usb_port_status_t port_status;
+ unsigned long flags;
+
+ DEBUG_CALL("OcteonUSB: %s called\n", __FUNCTION__);
+
+ spin_lock_irqsave(&priv->lock, flags);
+ port_status = cvmx_usb_get_status(&priv->usb);
+ spin_unlock_irqrestore(&priv->lock, flags);
+ buf[0] = 0;
+ buf[0] = port_status.connect_change << 1;
+
+ return(buf[0] != 0);
+}
+
+static int octeon_usb_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, u16 wIndex, char *buf, u16 wLength)
+{
+ struct octeon_hcd *priv = hcd_to_octeon(hcd);
+ cvmx_usb_port_status_t usb_port_status;
+ int port_status;
+ struct usb_hub_descriptor *desc;
+ unsigned long flags;
+
+ switch (typeReq)
+ {
+ case ClearHubFeature:
+ DEBUG_ROOT_HUB("OcteonUSB: ClearHubFeature\n");
+ switch (wValue)
+ {
+ case C_HUB_LOCAL_POWER:
+ case C_HUB_OVER_CURRENT:
+ /* Nothing required here */
+ break;
+ default:
+ return -EINVAL;
+ }
+ break;
+ case ClearPortFeature:
+ DEBUG_ROOT_HUB("OcteonUSB: ClearPortFeature");
+ if (wIndex != 1)
+ {
+ DEBUG_ROOT_HUB(" INVALID\n");
+ return -EINVAL;
+ }
+
+ switch (wValue)
+ {
+ case USB_PORT_FEAT_ENABLE:
+ DEBUG_ROOT_HUB(" ENABLE");
+ spin_lock_irqsave(&priv->lock, flags);
+ cvmx_usb_disable(&priv->usb);
+ spin_unlock_irqrestore(&priv->lock, flags);
+ break;
+ case USB_PORT_FEAT_SUSPEND:
+ DEBUG_ROOT_HUB(" SUSPEND");
+ /* Not supported on Octeon */
+ break;
+ case USB_PORT_FEAT_POWER:
+ DEBUG_ROOT_HUB(" POWER");
+ /* Not supported on Octeon */
+ break;
+ case USB_PORT_FEAT_INDICATOR:
+ DEBUG_ROOT_HUB(" INDICATOR");
+ /* Port inidicator not supported */
+ break;
+ case USB_PORT_FEAT_C_CONNECTION:
+ DEBUG_ROOT_HUB(" C_CONNECTION");
+ /* Clears drivers internal connect status change flag */
+ spin_lock_irqsave(&priv->lock, flags);
+ cvmx_usb_set_status(&priv->usb, cvmx_usb_get_status(&priv->usb));
+ spin_unlock_irqrestore(&priv->lock, flags);
+ break;
+ case USB_PORT_FEAT_C_RESET:
+ DEBUG_ROOT_HUB(" C_RESET");
+ /* Clears the driver's internal Port Reset Change flag */
+ spin_lock_irqsave(&priv->lock, flags);
+ cvmx_usb_set_status(&priv->usb, cvmx_usb_get_status(&priv->usb));
+ spin_unlock_irqrestore(&priv->lock, flags);
+ break;
+ case USB_PORT_FEAT_C_ENABLE:
+ DEBUG_ROOT_HUB(" C_ENABLE");
+ /* Clears the driver's internal Port Enable/Disable Change flag */
+ spin_lock_irqsave(&priv->lock, flags);
+ cvmx_usb_set_status(&priv->usb, cvmx_usb_get_status(&priv->usb));
+ spin_unlock_irqrestore(&priv->lock, flags);
+ break;
+ case USB_PORT_FEAT_C_SUSPEND:
+ DEBUG_ROOT_HUB(" C_SUSPEND");
+ /* Clears the driver's internal Port Suspend Change flag,
+ which is set when resume signaling on the host port is
+ complete */
+ break;
+ case USB_PORT_FEAT_C_OVER_CURRENT:
+ DEBUG_ROOT_HUB(" C_OVER_CURRENT");
+ /* Clears the driver's overcurrent Change flag */
+ spin_lock_irqsave(&priv->lock, flags);
+ cvmx_usb_set_status(&priv->usb, cvmx_usb_get_status(&priv->usb));
+ spin_unlock_irqrestore(&priv->lock, flags);
+ break;
+ default:
+ DEBUG_ROOT_HUB(" UNKNOWN\n");
+ return -EINVAL;
+ }
+ DEBUG_ROOT_HUB("\n");
+ break;
+ case GetHubDescriptor:
+ DEBUG_ROOT_HUB("OcteonUSB: GetHubDescriptor\n");
+ desc = (struct usb_hub_descriptor *)buf;
+ desc->bDescLength = 9;
+ desc->bDescriptorType = 0x29;
+ desc->bNbrPorts = 1;
+ desc->wHubCharacteristics = 0x08;
+ desc->bPwrOn2PwrGood = 1;
+ desc->bHubContrCurrent = 0;
+ desc->u.hs.DeviceRemovable[0] = 0;
+ desc->u.hs.DeviceRemovable[1] = 0xff;
+ break;
+ case GetHubStatus:
+ DEBUG_ROOT_HUB("OcteonUSB: GetHubStatus\n");
+ *(__le32 *)buf = 0;
+ break;
+ case GetPortStatus:
+ DEBUG_ROOT_HUB("OcteonUSB: GetPortStatus");
+ if (wIndex != 1)
+ {
+ DEBUG_ROOT_HUB(" INVALID\n");
+ return -EINVAL;
+ }
+
+ spin_lock_irqsave(&priv->lock, flags);
+ usb_port_status = cvmx_usb_get_status(&priv->usb);
+ spin_unlock_irqrestore(&priv->lock, flags);
+ port_status = 0;
+
+ if (usb_port_status.connect_change)
+ {
+ port_status |= (1 << USB_PORT_FEAT_C_CONNECTION);
+ DEBUG_ROOT_HUB(" C_CONNECTION");
+ }
+
+ if (usb_port_status.port_enabled)
+ {
+ port_status |= (1 << USB_PORT_FEAT_C_ENABLE);
+ DEBUG_ROOT_HUB(" C_ENABLE");
+ }
+
+ if (usb_port_status.connected)
+ {
+ port_status |= (1 << USB_PORT_FEAT_CONNECTION);
+ DEBUG_ROOT_HUB(" CONNECTION");
+ }
+
+ if (usb_port_status.port_enabled)
+ {
+ port_status |= (1 << USB_PORT_FEAT_ENABLE);
+ DEBUG_ROOT_HUB(" ENABLE");
+ }
+
+ if (usb_port_status.port_over_current)
+ {
+ port_status |= (1 << USB_PORT_FEAT_OVER_CURRENT);
+ DEBUG_ROOT_HUB(" OVER_CURRENT");
+ }
+
+ if (usb_port_status.port_powered)
+ {
+ port_status |= (1 << USB_PORT_FEAT_POWER);
+ DEBUG_ROOT_HUB(" POWER");
+ }
+
+ if (usb_port_status.port_speed == CVMX_USB_SPEED_HIGH)
+ {
+ port_status |= USB_PORT_STAT_HIGH_SPEED;
+ DEBUG_ROOT_HUB(" HIGHSPEED");
+ }
+ else if (usb_port_status.port_speed == CVMX_USB_SPEED_LOW)
+ {
+ port_status |= (1 << USB_PORT_FEAT_LOWSPEED);
+ DEBUG_ROOT_HUB(" LOWSPEED");
+ }
+
+ *((__le32 *)buf) = cpu_to_le32(port_status);
+ DEBUG_ROOT_HUB("\n");
+ break;
+ case SetHubFeature:
+ DEBUG_ROOT_HUB("OcteonUSB: SetHubFeature\n");
+ /* No HUB features supported */
+ break;
+ case SetPortFeature:
+ DEBUG_ROOT_HUB("OcteonUSB: SetPortFeature");
+ if (wIndex != 1)
+ {
+ DEBUG_ROOT_HUB(" INVALID\n");
+ return -EINVAL;
+ }
+
+ switch (wValue)
+ {
+ case USB_PORT_FEAT_SUSPEND:
+ DEBUG_ROOT_HUB(" SUSPEND\n");
+ return -EINVAL;
+ case USB_PORT_FEAT_POWER:
+ DEBUG_ROOT_HUB(" POWER\n");
+ return -EINVAL;
+ case USB_PORT_FEAT_RESET:
+ DEBUG_ROOT_HUB(" RESET\n");
+ spin_lock_irqsave(&priv->lock, flags);
+ cvmx_usb_disable(&priv->usb);
+ if (cvmx_usb_enable(&priv->usb))
+ DEBUG_ERROR("Failed to enable the port\n");
+ spin_unlock_irqrestore(&priv->lock, flags);
+ return 0;
+ case USB_PORT_FEAT_INDICATOR:
+ DEBUG_ROOT_HUB(" INDICATOR\n");
+ /* Not supported */
+ break;
+ default:
+ DEBUG_ROOT_HUB(" UNKNOWN\n");
+ return -EINVAL;
+ }
+ break;
+ default:
+ DEBUG_ROOT_HUB("OcteonUSB: Unknown root hub request\n");
+ return -EINVAL;
+ }
+ return 0;
+}
+
+
+static const struct hc_driver octeon_hc_driver = {
+ .description = "Octeon USB",
+ .product_desc = "Octeon Host Controller",
+ .hcd_priv_size = sizeof(struct octeon_hcd),
+ .irq = octeon_usb_irq,
+ .flags = HCD_MEMORY | HCD_USB2,
+ .start = octeon_usb_start,
+ .stop = octeon_usb_stop,
+ .urb_enqueue = octeon_usb_urb_enqueue,
+ .urb_dequeue = octeon_usb_urb_dequeue,
+ .endpoint_disable = octeon_usb_endpoint_disable,
+ .get_frame_number = octeon_usb_get_frame_number,
+ .hub_status_data = octeon_usb_hub_status_data,
+ .hub_control = octeon_usb_hub_control,
+};
+
+
+static int octeon_usb_driver_probe(struct device *dev)
+{
+ int status;
+ int usb_num = to_platform_device(dev)->id;
+ int irq = platform_get_irq(to_platform_device(dev), 0);
+ struct octeon_hcd *priv;
+ struct usb_hcd *hcd;
+ unsigned long flags;
+
+ DEBUG_CALL("OcteonUSB: %s called\n", __FUNCTION__);
+
+ /* Set the DMA mask to 64bits so we get buffers already translated for
+ DMA */
+ dev->coherent_dma_mask = ~0;
+ dev->dma_mask = &dev->coherent_dma_mask;
+
+ hcd = usb_create_hcd(&octeon_hc_driver, dev, dev_name(dev));
+ if (!hcd)
+ {
+ DEBUG_FATAL("OcteonUSB: Failed to allocate memory for HCD\n");
+ return -1;
+ }
+ hcd->uses_new_polling = 1;
+ priv = (struct octeon_hcd *)hcd->hcd_priv;
+
+ spin_lock_init(&priv->lock);
+
+ tasklet_init(&priv->dequeue_tasklet, octeon_usb_urb_dequeue_work, (unsigned long)priv);
+ INIT_LIST_HEAD(&priv->dequeue_list);
+
+ //status = cvmx_usb_initialize(&priv->usb, usb_num, CVMX_USB_INITIALIZE_FLAGS_CLOCK_AUTO | CVMX_USB_INITIALIZE_FLAGS_DEBUG_INFO | CVMX_USB_INITIALIZE_FLAGS_DEBUG_TRANSFERS | CVMX_USB_INITIALIZE_FLAGS_DEBUG_CALLBACKS);
+ status = cvmx_usb_initialize(&priv->usb, usb_num, CVMX_USB_INITIALIZE_FLAGS_CLOCK_AUTO);
+ if (status)
+ {
+ DEBUG_FATAL("OcteonUSB: USB initialization failed with %d\n", status);
+ kfree(hcd);
+ return -1;
+ }
+
+ /* This delay is needed for CN3010, but I don't know why... */
+ mdelay(10);
+
+ spin_lock_irqsave(&priv->lock, flags);
+ cvmx_usb_poll(&priv->usb);
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ status = usb_add_hcd(hcd, irq, IRQF_SHARED);
+ if (status)
+ {
+ DEBUG_FATAL("OcteonUSB: USB add HCD failed with %d\n", status);
+ kfree(hcd);
+ return -1;
+ }
+
+ printk("OcteonUSB: Registered HCD for port %d on irq %d\n", usb_num, irq);
+
+ return 0;
+}
+
+static int octeon_usb_driver_remove(struct device *dev)
+{
+ int status;
+ struct usb_hcd *hcd = dev_get_drvdata(dev);
+ struct octeon_hcd *priv = hcd_to_octeon(hcd);
+ unsigned long flags;
+
+ DEBUG_CALL("OcteonUSB: %s called\n", __FUNCTION__);
+
+ usb_remove_hcd(hcd);
+ tasklet_kill(&priv->dequeue_tasklet);
+ spin_lock_irqsave(&priv->lock, flags);
+ status = cvmx_usb_shutdown(&priv->usb);
+ spin_unlock_irqrestore(&priv->lock, flags);
+ if (status)
+ DEBUG_FATAL("OcteonUSB: USB shutdown failed with %d\n", status);
+
+ kfree(hcd);
+
+ return 0;
+}
+
+static struct device_driver octeon_usb_driver = {
+ .name = "OcteonUSB",
+ .bus = &platform_bus_type,
+ .probe = octeon_usb_driver_probe,
+ .remove = octeon_usb_driver_remove,
+};
+
+
+#define MAX_USB_PORTS 10
+struct platform_device *pdev_glob[MAX_USB_PORTS];
+static int octeon_usb_registered;
+static int __init octeon_usb_module_init(void)
+{
+ int num_devices = cvmx_usb_get_num_ports();
+ int device;
+
+ if (usb_disabled() || num_devices == 0)
+ return -ENODEV;
+
+ if (driver_register(&octeon_usb_driver))
+ {
+ DEBUG_FATAL("OcteonUSB: Failed to register driver\n");
+ return -ENOMEM;
+ }
+ octeon_usb_registered = 1;
+ printk("OcteonUSB: Detected %d ports\n", num_devices);
+
+ /*
+ * Only cn52XX and cn56XX have DWC_OTG USB hardware and the
+ * IOB priority registers. Under heavy network load USB
+ * hardware can be starved by the IOB causing a crash. Give
+ * it a priority boost if it has been waiting more than 400
+ * cycles to avoid this situation.
+ *
+ * Testing indicates that a cnt_val of 8192 is not sufficient,
+ * but no failures are seen with 4096. We choose a value of
+ * 400 to give a safety factor of 10.
+ */
+ if (OCTEON_IS_MODEL(OCTEON_CN52XX) || OCTEON_IS_MODEL(OCTEON_CN56XX)) {
+ union cvmx_iob_n2c_l2c_pri_cnt pri_cnt;
+
+ pri_cnt.u64 = 0;
+ pri_cnt.s.cnt_enb = 1;
+ pri_cnt.s.cnt_val = 400;
+ cvmx_write_csr(CVMX_IOB_N2C_L2C_PRI_CNT, pri_cnt.u64);
+ }
+
+ for (device = 0; device < num_devices; device++)
+ {
+ struct resource irq_resource;
+ struct platform_device *pdev;
+ memset(&irq_resource, 0, sizeof(irq_resource));
+ irq_resource.start = (device==0) ? OCTEON_IRQ_USB0 : OCTEON_IRQ_USB1;
+ irq_resource.end = irq_resource.start;
+ irq_resource.flags = IORESOURCE_IRQ;
+ pdev = platform_device_register_simple((char*)octeon_usb_driver.name, device, &irq_resource, 1);
+ if (!pdev)
+ {
+ DEBUG_FATAL("OcteonUSB: Failed to allocate platform device for USB%d\n", device);
+ return -ENOMEM;
+ }
+ if (device < MAX_USB_PORTS)
+ pdev_glob[device] = pdev;
+
+ }
+ return 0;
+}
+
+static void __exit octeon_usb_module_cleanup(void)
+{
+ int i;
+ DEBUG_CALL("OcteonUSB: %s called\n", __FUNCTION__);
+ for (i = 0; i <MAX_USB_PORTS; i++)
+ if (pdev_glob[i])
+ {
+ platform_device_unregister(pdev_glob[i]);
+ pdev_glob[i] = NULL;
+ }
+ if (octeon_usb_registered)
+ driver_unregister(&octeon_usb_driver);
+}
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Cavium Networks <support@caviumnetworks.com>");
+MODULE_DESCRIPTION("Cavium Networks Octeon USB Host driver.");
+module_init(octeon_usb_module_init);
+module_exit(octeon_usb_module_cleanup);
projects / GitHub / exynos8895 / android_kernel_samsung_universal8895.git / commitdiff