staging: comedi: rtd520: factor out the board init

Factor the code that does the low-level init of the board out of
rtd_attach().

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/staging/comedi/drivers/rtd520.c b/drivers/staging/comedi/drivers/rtd520.c
index 12af8278e56dd59f18f87b7df20482fe8a9847ee..5d68a0080b63230d453b6da09db48cb6db743032 100644 (file)
--- a/drivers/staging/comedi/drivers/rtd520.c
+++ b/drivers/staging/comedi/drivers/rtd520.c
@@ -1542,6 +1542,39 @@ static int rtd_dio_insn_config(struct comedi_device *dev,
        return 1;
 }
 
+static void rtd_init_board(struct comedi_device *dev)
+{
+       struct rtdPrivate *devpriv = dev->private;
+
+       /* initialize board, per RTD spec */
+       /* also, initialize shadow registers */
+       writel(0, devpriv->las0 + LAS0_BOARD_RESET);
+       udelay(100);            /* needed? */
+       writel(0, devpriv->lcfg + LCFG_ITCSR);
+       devpriv->intMask = 0;
+       writew(devpriv->intMask, devpriv->las0 + LAS0_IT);
+       devpriv->intClearMask = ~0;
+       writew(devpriv->intClearMask, devpriv->las0 + LAS0_CLEAR);
+       readw(devpriv->las0 + LAS0_CLEAR);
+       writel(0, devpriv->las0 + LAS0_OVERRUN);
+       writel(0, devpriv->las0 + LAS0_CGT_CLEAR);
+       writel(0, devpriv->las0 + LAS0_ADC_FIFO_CLEAR);
+       writel(0, devpriv->las0 + LAS0_DAC1_RESET);
+       writel(0, devpriv->las0 + LAS0_DAC2_RESET);
+       /* clear digital IO fifo */
+       devpriv->dioStatus = 0;
+       writew(devpriv->dioStatus, devpriv->las0 + LAS0_DIO_STATUS);
+       devpriv->utcCtrl[0] = (0 << 6) | 0x30;
+       devpriv->utcCtrl[1] = (1 << 6) | 0x30;
+       devpriv->utcCtrl[2] = (2 << 6) | 0x30;
+       devpriv->utcCtrl[3] = (3 << 6) | 0x00;
+       writeb(devpriv->utcCtrl[0], devpriv->las0 + LAS0_UTC_CTRL);
+       writeb(devpriv->utcCtrl[1], devpriv->las0 + LAS0_UTC_CTRL);
+       writeb(devpriv->utcCtrl[2], devpriv->las0 + LAS0_UTC_CTRL);
+       writeb(devpriv->utcCtrl[3], devpriv->las0 + LAS0_UTC_CTRL);
+       /* TODO: set user out source ??? */
+}
+
 /* The RTD driver does this */
 static void rtd_pci_latency_quirk(struct comedi_device *dev,
                                  struct pci_dev *pcidev)
@@ -1713,33 +1746,7 @@ static int rtd_attach(struct comedi_device *dev, struct comedi_devconfig *it)
        s->n_chan = 3;
        s->maxdata = 0xffff;
 
-       /* initialize board, per RTD spec */
-       /* also, initialize shadow registers */
-       writel(0, devpriv->las0 + LAS0_BOARD_RESET);
-       udelay(100);            /* needed? */
-       writel(0, devpriv->lcfg + LCFG_ITCSR);
-       devpriv->intMask = 0;
-       writew(devpriv->intMask, devpriv->las0 + LAS0_IT);
-       devpriv->intClearMask = ~0;
-       writew(devpriv->intClearMask, devpriv->las0 + LAS0_CLEAR);
-       readw(devpriv->las0 + LAS0_CLEAR);
-       writel(0, devpriv->las0 + LAS0_OVERRUN);
-       writel(0, devpriv->las0 + LAS0_CGT_CLEAR);
-       writel(0, devpriv->las0 + LAS0_ADC_FIFO_CLEAR);
-       writel(0, devpriv->las0 + LAS0_DAC1_RESET);
-       writel(0, devpriv->las0 + LAS0_DAC2_RESET);
-       /* clear digital IO fifo */
-       devpriv->dioStatus = 0;
-       writew(devpriv->dioStatus, devpriv->las0 + LAS0_DIO_STATUS);
-       devpriv->utcCtrl[0] = (0 << 6) | 0x30;
-       devpriv->utcCtrl[1] = (1 << 6) | 0x30;
-       devpriv->utcCtrl[2] = (2 << 6) | 0x30;
-       devpriv->utcCtrl[3] = (3 << 6) | 0x00;
-       writeb(devpriv->utcCtrl[0], devpriv->las0 + LAS0_UTC_CTRL);
-       writeb(devpriv->utcCtrl[1], devpriv->las0 + LAS0_UTC_CTRL);
-       writeb(devpriv->utcCtrl[2], devpriv->las0 + LAS0_UTC_CTRL);
-       writeb(devpriv->utcCtrl[3], devpriv->las0 + LAS0_UTC_CTRL);
-       /* TODO: set user out source ??? */
+       rtd_init_board(dev);
 
        /* check if our interrupt is available and get it */
        ret = request_irq(pcidev->irq, rtd_interrupt,