ARM: OMAP: Clear level-triggered GPIO interrupts in unmask hook
authorKevin Hilman <khilman@mvista.com>
Thu, 17 Jan 2008 05:56:15 +0000 (21:56 -0800)
committerTony Lindgren <tony@atomide.com>
Mon, 14 Apr 2008 16:57:10 +0000 (09:57 -0700)
The clearing was moved to the unmask hook because it is known to run
after the interrupt handler has actually run.  Before this patch, if
interrupts are threaded, the clearing/unmasking of level triggered
interrupts would be done before the threaded handler actually ran.

Signed-off-by: Kevin Hilman <khilman@mvista.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
arch/arm/plat-omap/gpio.c

index 56889fdb07407d0437da2a078c96a102ff8531c1..4f104e4f6c04c54764dda8d7dea8d6e9dc1595ab 100644 (file)
@@ -148,6 +148,7 @@ struct gpio_bank {
        u32 saved_fallingdetect;
        u32 saved_risingdetect;
 #endif
+       u32 level_mask;
        spinlock_t lock;
        struct gpio_chip chip;
 };
@@ -538,6 +539,9 @@ static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio,
                        bank->enabled_non_wakeup_gpios &= ~gpio_bit;
        }
 
+       bank->level_mask =
+               __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0) |
+               __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1);
        /*
         * FIXME: Possibly do 'set_irq_handler(j, handle_level_irq)' if only
         * level triggering requested.
@@ -1021,12 +1025,7 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
                        isr &= 0x0000ffff;
 
                if (cpu_class_is_omap2()) {
-                       level_mask =
-                               __raw_readl(bank->base +
-                                       OMAP24XX_GPIO_LEVELDETECT0) |
-                               __raw_readl(bank->base +
-                                       OMAP24XX_GPIO_LEVELDETECT1);
-                       level_mask &= enabled;
+                       level_mask = bank->level_mask & enabled;
                }
 
                /* clear edge sensitive interrupts before handler(s) are
@@ -1088,14 +1087,6 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
                                retrigger |= irq_mask;
                        }
                }
-
-               if (cpu_class_is_omap2()) {
-                       /* clear level sensitive interrupts after handler(s) */
-                       _enable_gpio_irqbank(bank, isr_saved & level_mask, 0);
-                       _clear_gpio_irqbank(bank, isr_saved & level_mask);
-                       _enable_gpio_irqbank(bank, isr_saved & level_mask, 1);
-               }
-
        }
        /* if bank has any level sensitive GPIO pin interrupt
        configured, we must unmask the bank interrupt only after
@@ -1134,6 +1125,14 @@ static void gpio_unmask_irq(unsigned int irq)
 {
        unsigned int gpio = irq - IH_GPIO_BASE;
        struct gpio_bank *bank = get_irq_chip_data(irq);
+       unsigned int irq_mask = 1 << get_gpio_index(gpio);
+
+       /* For level-triggered GPIOs, the clearing must be done after
+        * the HW source is cleared, thus after the handler has run */
+       if (bank->level_mask & irq_mask) {
+               _set_gpio_irqenable(bank, gpio, 0);
+               _clear_gpio_irqstatus(bank, gpio);
+       }
 
        _set_gpio_irqenable(bank, gpio, 1);
 }