+++ /dev/null
-#ifndef __ASM_SUMMIT_APIC_H
-#define __ASM_SUMMIT_APIC_H
-
-#include <asm/smp.h>
-#include <linux/gfp.h>
-
-/* In clustered mode, the high nibble of APIC ID is a cluster number.
- * The low nibble is a 4-bit bitmap. */
-#define XAPIC_DEST_CPUS_SHIFT 4
-#define XAPIC_DEST_CPUS_MASK ((1u << XAPIC_DEST_CPUS_SHIFT) - 1)
-#define XAPIC_DEST_CLUSTER_MASK (XAPIC_DEST_CPUS_MASK << XAPIC_DEST_CPUS_SHIFT)
-
-#define APIC_DFR_VALUE (APIC_DFR_CLUSTER)
-
-static inline const cpumask_t *summit_target_cpus(void)
-{
- /* CPU_MASK_ALL (0xff) has undefined behaviour with
- * dest_LowestPrio mode logical clustered apic interrupt routing
- * Just start on cpu 0. IRQ balancing will spread load
- */
- return &cpumask_of_cpu(0);
-}
-
-static inline unsigned long
-summit_check_apicid_used(physid_mask_t bitmap, int apicid)
-{
- return 0;
-}
-
-/* we don't use the phys_cpu_present_map to indicate apicid presence */
-static inline unsigned long summit_check_apicid_present(int bit)
-{
- return 1;
-}
-
-#define apicid_cluster(apicid) ((apicid) & XAPIC_DEST_CLUSTER_MASK)
-
-extern u8 cpu_2_logical_apicid[];
-
-static inline void summit_init_apic_ldr(void)
-{
- unsigned long val, id;
- int count = 0;
- u8 my_id = (u8)hard_smp_processor_id();
- u8 my_cluster = (u8)apicid_cluster(my_id);
-#ifdef CONFIG_SMP
- u8 lid;
- int i;
-
- /* Create logical APIC IDs by counting CPUs already in cluster. */
- for (count = 0, i = nr_cpu_ids; --i >= 0; ) {
- lid = cpu_2_logical_apicid[i];
- if (lid != BAD_APICID && apicid_cluster(lid) == my_cluster)
- ++count;
- }
-#endif
- /* We only have a 4 wide bitmap in cluster mode. If a deranged
- * BIOS puts 5 CPUs in one APIC cluster, we're hosed. */
- BUG_ON(count >= XAPIC_DEST_CPUS_SHIFT);
- id = my_cluster | (1UL << count);
- apic_write(APIC_DFR, APIC_DFR_VALUE);
- val = apic_read(APIC_LDR) & ~APIC_LDR_MASK;
- val |= SET_APIC_LOGICAL_ID(id);
- apic_write(APIC_LDR, val);
-}
-
-static inline int summit_apic_id_registered(void)
-{
- return 1;
-}
-
-static inline void summit_setup_apic_routing(void)
-{
- printk("Enabling APIC mode: Summit. Using %d I/O APICs\n",
- nr_ioapics);
-}
-
-static inline int summit_apicid_to_node(int logical_apicid)
-{
-#ifdef CONFIG_SMP
- return apicid_2_node[hard_smp_processor_id()];
-#else
- return 0;
-#endif
-}
-
-/* Mapping from cpu number to logical apicid */
-static inline int summit_cpu_to_logical_apicid(int cpu)
-{
-#ifdef CONFIG_SMP
- if (cpu >= nr_cpu_ids)
- return BAD_APICID;
- return (int)cpu_2_logical_apicid[cpu];
-#else
- return logical_smp_processor_id();
-#endif
-}
-
-static inline int summit_cpu_present_to_apicid(int mps_cpu)
-{
- if (mps_cpu < nr_cpu_ids)
- return (int)per_cpu(x86_bios_cpu_apicid, mps_cpu);
- else
- return BAD_APICID;
-}
-
-static inline physid_mask_t
-summit_ioapic_phys_id_map(physid_mask_t phys_id_map)
-{
- /* For clustered we don't have a good way to do this yet - hack */
- return physids_promote(0x0F);
-}
-
-static inline physid_mask_t summit_apicid_to_cpu_present(int apicid)
-{
- return physid_mask_of_physid(0);
-}
-
-static inline void summit_setup_portio_remap(void)
-{
-}
-
-static inline int summit_check_phys_apicid_present(int boot_cpu_physical_apicid)
-{
- return 1;
-}
-
-static inline unsigned int summit_cpu_mask_to_apicid(const cpumask_t *cpumask)
-{
- int cpus_found = 0;
- int num_bits_set;
- int apicid;
- int cpu;
-
- num_bits_set = cpus_weight(*cpumask);
- /* Return id to all */
- if (num_bits_set >= nr_cpu_ids)
- return 0xFF;
- /*
- * The cpus in the mask must all be on the apic cluster. If are not
- * on the same apicid cluster return default value of target_cpus():
- */
- cpu = first_cpu(*cpumask);
- apicid = summit_cpu_to_logical_apicid(cpu);
-
- while (cpus_found < num_bits_set) {
- if (cpu_isset(cpu, *cpumask)) {
- int new_apicid = summit_cpu_to_logical_apicid(cpu);
-
- if (apicid_cluster(apicid) !=
- apicid_cluster(new_apicid)) {
- printk ("%s: Not a valid mask!\n", __func__);
-
- return 0xFF;
- }
- apicid = apicid | new_apicid;
- cpus_found++;
- }
- cpu++;
- }
- return apicid;
-}
-
-static inline unsigned int
-summit_cpu_mask_to_apicid_and(const struct cpumask *inmask,
- const struct cpumask *andmask)
-{
- int apicid = summit_cpu_to_logical_apicid(0);
- cpumask_var_t cpumask;
-
- if (!alloc_cpumask_var(&cpumask, GFP_ATOMIC))
- return apicid;
-
- cpumask_and(cpumask, inmask, andmask);
- cpumask_and(cpumask, cpumask, cpu_online_mask);
- apicid = summit_cpu_mask_to_apicid(cpumask);
-
- free_cpumask_var(cpumask);
-
- return apicid;
-}
-
-/*
- * cpuid returns the value latched in the HW at reset, not the APIC ID
- * register's value. For any box whose BIOS changes APIC IDs, like
- * clustered APIC systems, we must use hard_smp_processor_id.
- *
- * See Intel's IA-32 SW Dev's Manual Vol2 under CPUID.
- */
-static inline int summit_phys_pkg_id(int cpuid_apic, int index_msb)
-{
- return hard_smp_processor_id() >> index_msb;
-}
-
-#endif /* __ASM_SUMMIT_APIC_H */
+++ /dev/null
-#ifndef __ASM_SUMMIT_APICDEF_H
-#define __ASM_SUMMIT_APICDEF_H
-
-static inline unsigned summit_get_apic_id(unsigned long x)
-{
- return (x >> 24) & 0xFF;
-}
-
-#endif
+++ /dev/null
-#ifndef __ASM_SUMMIT_IPI_H
-#define __ASM_SUMMIT_IPI_H
-
-void default_send_IPI_mask_sequence(const cpumask_t *mask, int vector);
-void default_send_IPI_mask_allbutself(const cpumask_t *mask, int vector);
-
-static inline void summit_send_IPI_mask(const cpumask_t *mask, int vector)
-{
- default_send_IPI_mask_sequence(mask, vector);
-}
-
-static inline void summit_send_IPI_allbutself(int vector)
-{
- cpumask_t mask = cpu_online_map;
- cpu_clear(smp_processor_id(), mask);
-
- if (!cpus_empty(mask))
- summit_send_IPI_mask(&mask, vector);
-}
-
-static inline void summit_send_IPI_all(int vector)
-{
- summit_send_IPI_mask(&cpu_online_map, vector);
-}
-
-#endif /* __ASM_SUMMIT_IPI_H */
+++ /dev/null
-#ifndef __ASM_SUMMIT_MPPARSE_H
-#define __ASM_SUMMIT_MPPARSE_H
-
-#include <asm/tsc.h>
-
-extern int use_cyclone;
-
-#ifdef CONFIG_X86_SUMMIT_NUMA
-extern void setup_summit(void);
-#else
-#define setup_summit() {}
-#endif
-
-static inline int
-summit_mps_oem_check(struct mpc_table *mpc, char *oem, char *productid)
-{
- if (!strncmp(oem, "IBM ENSW", 8) &&
- (!strncmp(productid, "VIGIL SMP", 9)
- || !strncmp(productid, "EXA", 3)
- || !strncmp(productid, "RUTHLESS SMP", 12))){
- mark_tsc_unstable("Summit based system");
- use_cyclone = 1; /*enable cyclone-timer*/
- setup_summit();
- return 1;
- }
- return 0;
-}
-
-/* Hook from generic ACPI tables.c */
-static inline int summit_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
-{
- if (!strncmp(oem_id, "IBM", 3) &&
- (!strncmp(oem_table_id, "SERVIGIL", 8)
- || !strncmp(oem_table_id, "EXA", 3))){
- mark_tsc_unstable("Summit based system");
- use_cyclone = 1; /*enable cyclone-timer*/
- setup_summit();
- return 1;
- }
- return 0;
-}
-
-struct rio_table_hdr {
- unsigned char version; /* Version number of this data structure */
- /* Version 3 adds chassis_num & WP_index */
- unsigned char num_scal_dev; /* # of Scalability devices (Twisters for Vigil) */
- unsigned char num_rio_dev; /* # of RIO I/O devices (Cyclones and Winnipegs) */
-} __attribute__((packed));
-
-struct scal_detail {
- unsigned char node_id; /* Scalability Node ID */
- unsigned long CBAR; /* Address of 1MB register space */
- unsigned char port0node; /* Node ID port connected to: 0xFF=None */
- unsigned char port0port; /* Port num port connected to: 0,1,2, or 0xFF=None */
- unsigned char port1node; /* Node ID port connected to: 0xFF = None */
- unsigned char port1port; /* Port num port connected to: 0,1,2, or 0xFF=None */
- unsigned char port2node; /* Node ID port connected to: 0xFF = None */
- unsigned char port2port; /* Port num port connected to: 0,1,2, or 0xFF=None */
- unsigned char chassis_num; /* 1 based Chassis number (1 = boot node) */
-} __attribute__((packed));
-
-struct rio_detail {
- unsigned char node_id; /* RIO Node ID */
- unsigned long BBAR; /* Address of 1MB register space */
- unsigned char type; /* Type of device */
- unsigned char owner_id; /* For WPEG: Node ID of Cyclone that owns this WPEG*/
- /* For CYC: Node ID of Twister that owns this CYC */
- unsigned char port0node; /* Node ID port connected to: 0xFF=None */
- unsigned char port0port; /* Port num port connected to: 0,1,2, or 0xFF=None */
- unsigned char port1node; /* Node ID port connected to: 0xFF=None */
- unsigned char port1port; /* Port num port connected to: 0,1,2, or 0xFF=None */
- unsigned char first_slot; /* For WPEG: Lowest slot number below this WPEG */
- /* For CYC: 0 */
- unsigned char status; /* For WPEG: Bit 0 = 1 : the XAPIC is used */
- /* = 0 : the XAPIC is not used, ie:*/
- /* ints fwded to another XAPIC */
- /* Bits1:7 Reserved */
- /* For CYC: Bits0:7 Reserved */
- unsigned char WP_index; /* For WPEG: WPEG instance index - lower ones have */
- /* lower slot numbers/PCI bus numbers */
- /* For CYC: No meaning */
- unsigned char chassis_num; /* 1 based Chassis number */
- /* For LookOut WPEGs this field indicates the */
- /* Expansion Chassis #, enumerated from Boot */
- /* Node WPEG external port, then Boot Node CYC */
- /* external port, then Next Vigil chassis WPEG */
- /* external port, etc. */
- /* Shared Lookouts have only 1 chassis number (the */
- /* first one assigned) */
-} __attribute__((packed));
-
-
-typedef enum {
- CompatTwister = 0, /* Compatibility Twister */
- AltTwister = 1, /* Alternate Twister of internal 8-way */
- CompatCyclone = 2, /* Compatibility Cyclone */
- AltCyclone = 3, /* Alternate Cyclone of internal 8-way */
- CompatWPEG = 4, /* Compatibility WPEG */
- AltWPEG = 5, /* Second Planar WPEG */
- LookOutAWPEG = 6, /* LookOut WPEG */
- LookOutBWPEG = 7, /* LookOut WPEG */
-} node_type;
-
-static inline int is_WPEG(struct rio_detail *rio){
- return (rio->type == CompatWPEG || rio->type == AltWPEG ||
- rio->type == LookOutAWPEG || rio->type == LookOutBWPEG);
-}
-
-#endif /* __ASM_SUMMIT_MPPARSE_H */
#include <linux/init.h>
#include <asm/io.h>
#include <asm/bios_ebda.h>
-#include <asm/summit/mpparse.h>
+
+/*
+ * APIC driver for the IBM "Summit" chipset.
+ */
+#define APIC_DEFINITION 1
+#include <linux/threads.h>
+#include <linux/cpumask.h>
+#include <asm/mpspec.h>
+#include <asm/apic.h>
+#include <asm/smp.h>
+#include <asm/genapic.h>
+#include <asm/fixmap.h>
+#include <asm/apicdef.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/gfp.h>
+#include <linux/smp.h>
+
+static inline unsigned summit_get_apic_id(unsigned long x)
+{
+ return (x >> 24) & 0xFF;
+}
+
+void default_send_IPI_mask_sequence(const cpumask_t *mask, int vector);
+void default_send_IPI_mask_allbutself(const cpumask_t *mask, int vector);
+
+static inline void summit_send_IPI_mask(const cpumask_t *mask, int vector)
+{
+ default_send_IPI_mask_sequence(mask, vector);
+}
+
+static inline void summit_send_IPI_allbutself(int vector)
+{
+ cpumask_t mask = cpu_online_map;
+ cpu_clear(smp_processor_id(), mask);
+
+ if (!cpus_empty(mask))
+ summit_send_IPI_mask(&mask, vector);
+}
+
+static inline void summit_send_IPI_all(int vector)
+{
+ summit_send_IPI_mask(&cpu_online_map, vector);
+}
+
+#include <asm/tsc.h>
+
+extern int use_cyclone;
+
+#ifdef CONFIG_X86_SUMMIT_NUMA
+extern void setup_summit(void);
+#else
+#define setup_summit() {}
+#endif
+
+static inline int
+summit_mps_oem_check(struct mpc_table *mpc, char *oem, char *productid)
+{
+ if (!strncmp(oem, "IBM ENSW", 8) &&
+ (!strncmp(productid, "VIGIL SMP", 9)
+ || !strncmp(productid, "EXA", 3)
+ || !strncmp(productid, "RUTHLESS SMP", 12))){
+ mark_tsc_unstable("Summit based system");
+ use_cyclone = 1; /*enable cyclone-timer*/
+ setup_summit();
+ return 1;
+ }
+ return 0;
+}
+
+/* Hook from generic ACPI tables.c */
+static inline int summit_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+{
+ if (!strncmp(oem_id, "IBM", 3) &&
+ (!strncmp(oem_table_id, "SERVIGIL", 8)
+ || !strncmp(oem_table_id, "EXA", 3))){
+ mark_tsc_unstable("Summit based system");
+ use_cyclone = 1; /*enable cyclone-timer*/
+ setup_summit();
+ return 1;
+ }
+ return 0;
+}
+
+struct rio_table_hdr {
+ unsigned char version; /* Version number of this data structure */
+ /* Version 3 adds chassis_num & WP_index */
+ unsigned char num_scal_dev; /* # of Scalability devices (Twisters for Vigil) */
+ unsigned char num_rio_dev; /* # of RIO I/O devices (Cyclones and Winnipegs) */
+} __attribute__((packed));
+
+struct scal_detail {
+ unsigned char node_id; /* Scalability Node ID */
+ unsigned long CBAR; /* Address of 1MB register space */
+ unsigned char port0node; /* Node ID port connected to: 0xFF=None */
+ unsigned char port0port; /* Port num port connected to: 0,1,2, or 0xFF=None */
+ unsigned char port1node; /* Node ID port connected to: 0xFF = None */
+ unsigned char port1port; /* Port num port connected to: 0,1,2, or 0xFF=None */
+ unsigned char port2node; /* Node ID port connected to: 0xFF = None */
+ unsigned char port2port; /* Port num port connected to: 0,1,2, or 0xFF=None */
+ unsigned char chassis_num; /* 1 based Chassis number (1 = boot node) */
+} __attribute__((packed));
+
+struct rio_detail {
+ unsigned char node_id; /* RIO Node ID */
+ unsigned long BBAR; /* Address of 1MB register space */
+ unsigned char type; /* Type of device */
+ unsigned char owner_id; /* For WPEG: Node ID of Cyclone that owns this WPEG*/
+ /* For CYC: Node ID of Twister that owns this CYC */
+ unsigned char port0node; /* Node ID port connected to: 0xFF=None */
+ unsigned char port0port; /* Port num port connected to: 0,1,2, or 0xFF=None */
+ unsigned char port1node; /* Node ID port connected to: 0xFF=None */
+ unsigned char port1port; /* Port num port connected to: 0,1,2, or 0xFF=None */
+ unsigned char first_slot; /* For WPEG: Lowest slot number below this WPEG */
+ /* For CYC: 0 */
+ unsigned char status; /* For WPEG: Bit 0 = 1 : the XAPIC is used */
+ /* = 0 : the XAPIC is not used, ie:*/
+ /* ints fwded to another XAPIC */
+ /* Bits1:7 Reserved */
+ /* For CYC: Bits0:7 Reserved */
+ unsigned char WP_index; /* For WPEG: WPEG instance index - lower ones have */
+ /* lower slot numbers/PCI bus numbers */
+ /* For CYC: No meaning */
+ unsigned char chassis_num; /* 1 based Chassis number */
+ /* For LookOut WPEGs this field indicates the */
+ /* Expansion Chassis #, enumerated from Boot */
+ /* Node WPEG external port, then Boot Node CYC */
+ /* external port, then Next Vigil chassis WPEG */
+ /* external port, etc. */
+ /* Shared Lookouts have only 1 chassis number (the */
+ /* first one assigned) */
+} __attribute__((packed));
+
+
+typedef enum {
+ CompatTwister = 0, /* Compatibility Twister */
+ AltTwister = 1, /* Alternate Twister of internal 8-way */
+ CompatCyclone = 2, /* Compatibility Cyclone */
+ AltCyclone = 3, /* Alternate Cyclone of internal 8-way */
+ CompatWPEG = 4, /* Compatibility WPEG */
+ AltWPEG = 5, /* Second Planar WPEG */
+ LookOutAWPEG = 6, /* LookOut WPEG */
+ LookOutBWPEG = 7, /* LookOut WPEG */
+} node_type;
+
+static inline int is_WPEG(struct rio_detail *rio){
+ return (rio->type == CompatWPEG || rio->type == AltWPEG ||
+ rio->type == LookOutAWPEG || rio->type == LookOutBWPEG);
+}
+
+
+/* In clustered mode, the high nibble of APIC ID is a cluster number.
+ * The low nibble is a 4-bit bitmap. */
+#define XAPIC_DEST_CPUS_SHIFT 4
+#define XAPIC_DEST_CPUS_MASK ((1u << XAPIC_DEST_CPUS_SHIFT) - 1)
+#define XAPIC_DEST_CLUSTER_MASK (XAPIC_DEST_CPUS_MASK << XAPIC_DEST_CPUS_SHIFT)
+
+#define SUMMIT_APIC_DFR_VALUE (APIC_DFR_CLUSTER)
+
+static inline const cpumask_t *summit_target_cpus(void)
+{
+ /* CPU_MASK_ALL (0xff) has undefined behaviour with
+ * dest_LowestPrio mode logical clustered apic interrupt routing
+ * Just start on cpu 0. IRQ balancing will spread load
+ */
+ return &cpumask_of_cpu(0);
+}
+
+static inline unsigned long
+summit_check_apicid_used(physid_mask_t bitmap, int apicid)
+{
+ return 0;
+}
+
+/* we don't use the phys_cpu_present_map to indicate apicid presence */
+static inline unsigned long summit_check_apicid_present(int bit)
+{
+ return 1;
+}
+
+#define apicid_cluster(apicid) ((apicid) & XAPIC_DEST_CLUSTER_MASK)
+
+extern u8 cpu_2_logical_apicid[];
+
+static inline void summit_init_apic_ldr(void)
+{
+ unsigned long val, id;
+ int count = 0;
+ u8 my_id = (u8)hard_smp_processor_id();
+ u8 my_cluster = (u8)apicid_cluster(my_id);
+#ifdef CONFIG_SMP
+ u8 lid;
+ int i;
+
+ /* Create logical APIC IDs by counting CPUs already in cluster. */
+ for (count = 0, i = nr_cpu_ids; --i >= 0; ) {
+ lid = cpu_2_logical_apicid[i];
+ if (lid != BAD_APICID && apicid_cluster(lid) == my_cluster)
+ ++count;
+ }
+#endif
+ /* We only have a 4 wide bitmap in cluster mode. If a deranged
+ * BIOS puts 5 CPUs in one APIC cluster, we're hosed. */
+ BUG_ON(count >= XAPIC_DEST_CPUS_SHIFT);
+ id = my_cluster | (1UL << count);
+ apic_write(APIC_DFR, SUMMIT_APIC_DFR_VALUE);
+ val = apic_read(APIC_LDR) & ~APIC_LDR_MASK;
+ val |= SET_APIC_LOGICAL_ID(id);
+ apic_write(APIC_LDR, val);
+}
+
+static inline int summit_apic_id_registered(void)
+{
+ return 1;
+}
+
+static inline void summit_setup_apic_routing(void)
+{
+ printk("Enabling APIC mode: Summit. Using %d I/O APICs\n",
+ nr_ioapics);
+}
+
+static inline int summit_apicid_to_node(int logical_apicid)
+{
+#ifdef CONFIG_SMP
+ return apicid_2_node[hard_smp_processor_id()];
+#else
+ return 0;
+#endif
+}
+
+/* Mapping from cpu number to logical apicid */
+static inline int summit_cpu_to_logical_apicid(int cpu)
+{
+#ifdef CONFIG_SMP
+ if (cpu >= nr_cpu_ids)
+ return BAD_APICID;
+ return (int)cpu_2_logical_apicid[cpu];
+#else
+ return logical_smp_processor_id();
+#endif
+}
+
+static inline int summit_cpu_present_to_apicid(int mps_cpu)
+{
+ if (mps_cpu < nr_cpu_ids)
+ return (int)per_cpu(x86_bios_cpu_apicid, mps_cpu);
+ else
+ return BAD_APICID;
+}
+
+static inline physid_mask_t
+summit_ioapic_phys_id_map(physid_mask_t phys_id_map)
+{
+ /* For clustered we don't have a good way to do this yet - hack */
+ return physids_promote(0x0F);
+}
+
+static inline physid_mask_t summit_apicid_to_cpu_present(int apicid)
+{
+ return physid_mask_of_physid(0);
+}
+
+static inline void summit_setup_portio_remap(void)
+{
+}
+
+static inline int summit_check_phys_apicid_present(int boot_cpu_physical_apicid)
+{
+ return 1;
+}
+
+static inline unsigned int summit_cpu_mask_to_apicid(const cpumask_t *cpumask)
+{
+ int cpus_found = 0;
+ int num_bits_set;
+ int apicid;
+ int cpu;
+
+ num_bits_set = cpus_weight(*cpumask);
+ /* Return id to all */
+ if (num_bits_set >= nr_cpu_ids)
+ return 0xFF;
+ /*
+ * The cpus in the mask must all be on the apic cluster. If are not
+ * on the same apicid cluster return default value of target_cpus():
+ */
+ cpu = first_cpu(*cpumask);
+ apicid = summit_cpu_to_logical_apicid(cpu);
+
+ while (cpus_found < num_bits_set) {
+ if (cpu_isset(cpu, *cpumask)) {
+ int new_apicid = summit_cpu_to_logical_apicid(cpu);
+
+ if (apicid_cluster(apicid) !=
+ apicid_cluster(new_apicid)) {
+ printk ("%s: Not a valid mask!\n", __func__);
+
+ return 0xFF;
+ }
+ apicid = apicid | new_apicid;
+ cpus_found++;
+ }
+ cpu++;
+ }
+ return apicid;
+}
+
+static inline unsigned int
+summit_cpu_mask_to_apicid_and(const struct cpumask *inmask,
+ const struct cpumask *andmask)
+{
+ int apicid = summit_cpu_to_logical_apicid(0);
+ cpumask_var_t cpumask;
+
+ if (!alloc_cpumask_var(&cpumask, GFP_ATOMIC))
+ return apicid;
+
+ cpumask_and(cpumask, inmask, andmask);
+ cpumask_and(cpumask, cpumask, cpu_online_mask);
+ apicid = summit_cpu_mask_to_apicid(cpumask);
+
+ free_cpumask_var(cpumask);
+
+ return apicid;
+}
+
+/*
+ * cpuid returns the value latched in the HW at reset, not the APIC ID
+ * register's value. For any box whose BIOS changes APIC IDs, like
+ * clustered APIC systems, we must use hard_smp_processor_id.
+ *
+ * See Intel's IA-32 SW Dev's Manual Vol2 under CPUID.
+ */
+static inline int summit_phys_pkg_id(int cpuid_apic, int index_msb)
+{
+ return hard_smp_processor_id() >> index_msb;
+}
+
+static int probe_summit(void)
+{
+ /* probed later in mptable/ACPI hooks */
+ return 0;
+}
+
+static void summit_vector_allocation_domain(int cpu, cpumask_t *retmask)
+{
+ /* Careful. Some cpus do not strictly honor the set of cpus
+ * specified in the interrupt destination when using lowest
+ * priority interrupt delivery mode.
+ *
+ * In particular there was a hyperthreading cpu observed to
+ * deliver interrupts to the wrong hyperthread when only one
+ * hyperthread was specified in the interrupt desitination.
+ */
+ *retmask = (cpumask_t){ { [0] = APIC_ALL_CPUS, } };
+}
static struct rio_table_hdr *rio_table_hdr __initdata;
static struct scal_detail *scal_devs[MAX_NUMNODES] __initdata;
next_wpeg = 0;
} while (next_wpeg != 0);
}
+
+
+struct genapic apic_summit = {
+
+ .name = "summit",
+ .probe = probe_summit,
+ .acpi_madt_oem_check = summit_acpi_madt_oem_check,
+ .apic_id_registered = summit_apic_id_registered,
+
+ .irq_delivery_mode = dest_LowestPrio,
+ /* logical delivery broadcast to all CPUs: */
+ .irq_dest_mode = 1,
+
+ .target_cpus = summit_target_cpus,
+ .disable_esr = 1,
+ .dest_logical = APIC_DEST_LOGICAL,
+ .check_apicid_used = summit_check_apicid_used,
+ .check_apicid_present = summit_check_apicid_present,
+
+ .vector_allocation_domain = summit_vector_allocation_domain,
+ .init_apic_ldr = summit_init_apic_ldr,
+
+ .ioapic_phys_id_map = summit_ioapic_phys_id_map,
+ .setup_apic_routing = summit_setup_apic_routing,
+ .multi_timer_check = NULL,
+ .apicid_to_node = summit_apicid_to_node,
+ .cpu_to_logical_apicid = summit_cpu_to_logical_apicid,
+ .cpu_present_to_apicid = summit_cpu_present_to_apicid,
+ .apicid_to_cpu_present = summit_apicid_to_cpu_present,
+ .setup_portio_remap = NULL,
+ .check_phys_apicid_present = summit_check_phys_apicid_present,
+ .enable_apic_mode = NULL,
+ .phys_pkg_id = summit_phys_pkg_id,
+ .mps_oem_check = summit_mps_oem_check,
+
+ .get_apic_id = summit_get_apic_id,
+ .set_apic_id = NULL,
+ .apic_id_mask = 0xFF << 24,
+
+ .cpu_mask_to_apicid = summit_cpu_mask_to_apicid,
+ .cpu_mask_to_apicid_and = summit_cpu_mask_to_apicid_and,
+
+ .send_IPI_mask = summit_send_IPI_mask,
+ .send_IPI_mask_allbutself = NULL,
+ .send_IPI_allbutself = summit_send_IPI_allbutself,
+ .send_IPI_all = summit_send_IPI_all,
+ .send_IPI_self = NULL,
+
+ .wakeup_cpu = NULL,
+ .trampoline_phys_low = DEFAULT_TRAMPOLINE_PHYS_LOW,
+ .trampoline_phys_high = DEFAULT_TRAMPOLINE_PHYS_HIGH,
+
+ .wait_for_init_deassert = default_wait_for_init_deassert,
+
+ .smp_callin_clear_local_apic = NULL,
+ .store_NMI_vector = NULL,
+ .inquire_remote_apic = default_inquire_remote_apic,
+};
obj-y := probe.o default.o
obj-$(CONFIG_X86_NUMAQ) += numaq.o
-obj-$(CONFIG_X86_SUMMIT) += summit.o
obj-$(CONFIG_X86_BIGSMP) += bigsmp.o
obj-$(CONFIG_X86_ES7000) += es7000.o
+++ /dev/null
-/*
- * APIC driver for the IBM "Summit" chipset.
- */
-#define APIC_DEFINITION 1
-#include <linux/threads.h>
-#include <linux/cpumask.h>
-#include <asm/mpspec.h>
-#include <asm/genapic.h>
-#include <asm/fixmap.h>
-#include <asm/apicdef.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/init.h>
-#include <asm/summit/apicdef.h>
-#include <linux/smp.h>
-#include <asm/summit/apic.h>
-#include <asm/summit/ipi.h>
-#include <asm/summit/mpparse.h>
-
-static int probe_summit(void)
-{
- /* probed later in mptable/ACPI hooks */
- return 0;
-}
-
-static void summit_vector_allocation_domain(int cpu, cpumask_t *retmask)
-{
- /* Careful. Some cpus do not strictly honor the set of cpus
- * specified in the interrupt destination when using lowest
- * priority interrupt delivery mode.
- *
- * In particular there was a hyperthreading cpu observed to
- * deliver interrupts to the wrong hyperthread when only one
- * hyperthread was specified in the interrupt desitination.
- */
- *retmask = (cpumask_t){ { [0] = APIC_ALL_CPUS, } };
-}
-
-struct genapic apic_summit = {
-
- .name = "summit",
- .probe = probe_summit,
- .acpi_madt_oem_check = summit_acpi_madt_oem_check,
- .apic_id_registered = summit_apic_id_registered,
-
- .irq_delivery_mode = dest_LowestPrio,
- /* logical delivery broadcast to all CPUs: */
- .irq_dest_mode = 1,
-
- .target_cpus = summit_target_cpus,
- .disable_esr = 1,
- .dest_logical = APIC_DEST_LOGICAL,
- .check_apicid_used = summit_check_apicid_used,
- .check_apicid_present = summit_check_apicid_present,
-
- .vector_allocation_domain = summit_vector_allocation_domain,
- .init_apic_ldr = summit_init_apic_ldr,
-
- .ioapic_phys_id_map = summit_ioapic_phys_id_map,
- .setup_apic_routing = summit_setup_apic_routing,
- .multi_timer_check = NULL,
- .apicid_to_node = summit_apicid_to_node,
- .cpu_to_logical_apicid = summit_cpu_to_logical_apicid,
- .cpu_present_to_apicid = summit_cpu_present_to_apicid,
- .apicid_to_cpu_present = summit_apicid_to_cpu_present,
- .setup_portio_remap = NULL,
- .check_phys_apicid_present = summit_check_phys_apicid_present,
- .enable_apic_mode = NULL,
- .phys_pkg_id = summit_phys_pkg_id,
- .mps_oem_check = summit_mps_oem_check,
-
- .get_apic_id = summit_get_apic_id,
- .set_apic_id = NULL,
- .apic_id_mask = 0xFF << 24,
-
- .cpu_mask_to_apicid = summit_cpu_mask_to_apicid,
- .cpu_mask_to_apicid_and = summit_cpu_mask_to_apicid_and,
-
- .send_IPI_mask = summit_send_IPI_mask,
- .send_IPI_mask_allbutself = NULL,
- .send_IPI_allbutself = summit_send_IPI_allbutself,
- .send_IPI_all = summit_send_IPI_all,
- .send_IPI_self = NULL,
-
- .wakeup_cpu = NULL,
- .trampoline_phys_low = DEFAULT_TRAMPOLINE_PHYS_LOW,
- .trampoline_phys_high = DEFAULT_TRAMPOLINE_PHYS_HIGH,
-
- .wait_for_init_deassert = default_wait_for_init_deassert,
-
- .smp_callin_clear_local_apic = NULL,
- .store_NMI_vector = NULL,
- .inquire_remote_apic = default_inquire_remote_apic,
-};
projects / GitHub / moto-9609 / android_kernel_motorola_exynos9610.git / commitdiff