#include <net/ip.h>
#include <net/tcp.h>
#include <linux/if_macvlan.h>
+#include <linux/prefetch.h>
#include "fm10k.h"
}
module_exit(fm10k_exit_module);
+static bool fm10k_alloc_mapped_page(struct fm10k_ring *rx_ring,
+ struct fm10k_rx_buffer *bi)
+{
+ struct page *page = bi->page;
+ dma_addr_t dma;
+
+ /* Only page will be NULL if buffer was consumed */
+ if (likely(page))
+ return true;
+
+ /* alloc new page for storage */
+ page = alloc_page(GFP_ATOMIC | __GFP_COLD);
+ if (unlikely(!page)) {
+ rx_ring->rx_stats.alloc_failed++;
+ return false;
+ }
+
+ /* map page for use */
+ dma = dma_map_page(rx_ring->dev, page, 0, PAGE_SIZE, DMA_FROM_DEVICE);
+
+ /* if mapping failed free memory back to system since
+ * there isn't much point in holding memory we can't use
+ */
+ if (dma_mapping_error(rx_ring->dev, dma)) {
+ __free_page(page);
+ bi->page = NULL;
+
+ rx_ring->rx_stats.alloc_failed++;
+ return false;
+ }
+
+ bi->dma = dma;
+ bi->page = page;
+ bi->page_offset = 0;
+
+ return true;
+}
+
+/**
+ * fm10k_alloc_rx_buffers - Replace used receive buffers
+ * @rx_ring: ring to place buffers on
+ * @cleaned_count: number of buffers to replace
+ **/
+void fm10k_alloc_rx_buffers(struct fm10k_ring *rx_ring, u16 cleaned_count)
+{
+ union fm10k_rx_desc *rx_desc;
+ struct fm10k_rx_buffer *bi;
+ u16 i = rx_ring->next_to_use;
+
+ /* nothing to do */
+ if (!cleaned_count)
+ return;
+
+ rx_desc = FM10K_RX_DESC(rx_ring, i);
+ bi = &rx_ring->rx_buffer[i];
+ i -= rx_ring->count;
+
+ do {
+ if (!fm10k_alloc_mapped_page(rx_ring, bi))
+ break;
+
+ /* Refresh the desc even if buffer_addrs didn't change
+ * because each write-back erases this info.
+ */
+ rx_desc->q.pkt_addr = cpu_to_le64(bi->dma + bi->page_offset);
+
+ rx_desc++;
+ bi++;
+ i++;
+ if (unlikely(!i)) {
+ rx_desc = FM10K_RX_DESC(rx_ring, 0);
+ bi = rx_ring->rx_buffer;
+ i -= rx_ring->count;
+ }
+
+ /* clear the hdr_addr for the next_to_use descriptor */
+ rx_desc->q.hdr_addr = 0;
+
+ cleaned_count--;
+ } while (cleaned_count);
+
+ i += rx_ring->count;
+
+ if (rx_ring->next_to_use != i) {
+ /* record the next descriptor to use */
+ rx_ring->next_to_use = i;
+
+ /* update next to alloc since we have filled the ring */
+ rx_ring->next_to_alloc = i;
+
+ /* Force memory writes to complete before letting h/w
+ * know there are new descriptors to fetch. (Only
+ * applicable for weak-ordered memory model archs,
+ * such as IA-64).
+ */
+ wmb();
+
+ /* notify hardware of new descriptors */
+ writel(i, rx_ring->tail);
+ }
+}
+
+/**
+ * fm10k_reuse_rx_page - page flip buffer and store it back on the ring
+ * @rx_ring: rx descriptor ring to store buffers on
+ * @old_buff: donor buffer to have page reused
+ *
+ * Synchronizes page for reuse by the interface
+ **/
+static void fm10k_reuse_rx_page(struct fm10k_ring *rx_ring,
+ struct fm10k_rx_buffer *old_buff)
+{
+ struct fm10k_rx_buffer *new_buff;
+ u16 nta = rx_ring->next_to_alloc;
+
+ new_buff = &rx_ring->rx_buffer[nta];
+
+ /* update, and store next to alloc */
+ nta++;
+ rx_ring->next_to_alloc = (nta < rx_ring->count) ? nta : 0;
+
+ /* transfer page from old buffer to new buffer */
+ memcpy(new_buff, old_buff, sizeof(struct fm10k_rx_buffer));
+
+ /* sync the buffer for use by the device */
+ dma_sync_single_range_for_device(rx_ring->dev, old_buff->dma,
+ old_buff->page_offset,
+ FM10K_RX_BUFSZ,
+ DMA_FROM_DEVICE);
+}
+
+static bool fm10k_can_reuse_rx_page(struct fm10k_rx_buffer *rx_buffer,
+ struct page *page,
+ unsigned int truesize)
+{
+ /* avoid re-using remote pages */
+ if (unlikely(page_to_nid(page) != numa_mem_id()))
+ return false;
+
+#if (PAGE_SIZE < 8192)
+ /* if we are only owner of page we can reuse it */
+ if (unlikely(page_count(page) != 1))
+ return false;
+
+ /* flip page offset to other buffer */
+ rx_buffer->page_offset ^= FM10K_RX_BUFSZ;
+
+ /* since we are the only owner of the page and we need to
+ * increment it, just set the value to 2 in order to avoid
+ * an unnecessary locked operation
+ */
+ atomic_set(&page->_count, 2);
+#else
+ /* move offset up to the next cache line */
+ rx_buffer->page_offset += truesize;
+
+ if (rx_buffer->page_offset > (PAGE_SIZE - FM10K_RX_BUFSZ))
+ return false;
+
+ /* bump ref count on page before it is given to the stack */
+ get_page(page);
+#endif
+
+ return true;
+}
+
+/**
+ * fm10k_add_rx_frag - Add contents of Rx buffer to sk_buff
+ * @rx_ring: rx descriptor ring to transact packets on
+ * @rx_buffer: buffer containing page to add
+ * @rx_desc: descriptor containing length of buffer written by hardware
+ * @skb: sk_buff to place the data into
+ *
+ * This function will add the data contained in rx_buffer->page to the skb.
+ * This is done either through a direct copy if the data in the buffer is
+ * less than the skb header size, otherwise it will just attach the page as
+ * a frag to the skb.
+ *
+ * The function will then update the page offset if necessary and return
+ * true if the buffer can be reused by the interface.
+ **/
+static bool fm10k_add_rx_frag(struct fm10k_ring *rx_ring,
+ struct fm10k_rx_buffer *rx_buffer,
+ union fm10k_rx_desc *rx_desc,
+ struct sk_buff *skb)
+{
+ struct page *page = rx_buffer->page;
+ unsigned int size = le16_to_cpu(rx_desc->w.length);
+#if (PAGE_SIZE < 8192)
+ unsigned int truesize = FM10K_RX_BUFSZ;
+#else
+ unsigned int truesize = ALIGN(size, L1_CACHE_BYTES);
+#endif
+
+ if ((size <= FM10K_RX_HDR_LEN) && !skb_is_nonlinear(skb)) {
+ unsigned char *va = page_address(page) + rx_buffer->page_offset;
+
+ memcpy(__skb_put(skb, size), va, ALIGN(size, sizeof(long)));
+
+ /* we can reuse buffer as-is, just make sure it is local */
+ if (likely(page_to_nid(page) == numa_mem_id()))
+ return true;
+
+ /* this page cannot be reused so discard it */
+ put_page(page);
+ return false;
+ }
+
+ skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags, page,
+ rx_buffer->page_offset, size, truesize);
+
+ return fm10k_can_reuse_rx_page(rx_buffer, page, truesize);
+}
+
+static struct sk_buff *fm10k_fetch_rx_buffer(struct fm10k_ring *rx_ring,
+ union fm10k_rx_desc *rx_desc,
+ struct sk_buff *skb)
+{
+ struct fm10k_rx_buffer *rx_buffer;
+ struct page *page;
+
+ rx_buffer = &rx_ring->rx_buffer[rx_ring->next_to_clean];
+
+ page = rx_buffer->page;
+ prefetchw(page);
+
+ if (likely(!skb)) {
+ void *page_addr = page_address(page) +
+ rx_buffer->page_offset;
+
+ /* prefetch first cache line of first page */
+ prefetch(page_addr);
+#if L1_CACHE_BYTES < 128
+ prefetch(page_addr + L1_CACHE_BYTES);
+#endif
+
+ /* allocate a skb to store the frags */
+ skb = netdev_alloc_skb_ip_align(rx_ring->netdev,
+ FM10K_RX_HDR_LEN);
+ if (unlikely(!skb)) {
+ rx_ring->rx_stats.alloc_failed++;
+ return NULL;
+ }
+
+ /* we will be copying header into skb->data in
+ * pskb_may_pull so it is in our interest to prefetch
+ * it now to avoid a possible cache miss
+ */
+ prefetchw(skb->data);
+ }
+
+ /* we are reusing so sync this buffer for CPU use */
+ dma_sync_single_range_for_cpu(rx_ring->dev,
+ rx_buffer->dma,
+ rx_buffer->page_offset,
+ FM10K_RX_BUFSZ,
+ DMA_FROM_DEVICE);
+
+ /* pull page into skb */
+ if (fm10k_add_rx_frag(rx_ring, rx_buffer, rx_desc, skb)) {
+ /* hand second half of page back to the ring */
+ fm10k_reuse_rx_page(rx_ring, rx_buffer);
+ } else {
+ /* we are not reusing the buffer so unmap it */
+ dma_unmap_page(rx_ring->dev, rx_buffer->dma,
+ PAGE_SIZE, DMA_FROM_DEVICE);
+ }
+
+ /* clear contents of rx_buffer */
+ rx_buffer->page = NULL;
+
+ return skb;
+}
+
+/**
+ * fm10k_process_skb_fields - Populate skb header fields from Rx descriptor
+ * @rx_ring: rx descriptor ring packet is being transacted on
+ * @rx_desc: pointer to the EOP Rx descriptor
+ * @skb: pointer to current skb being populated
+ *
+ * This function checks the ring, descriptor, and packet information in
+ * order to populate the hash, checksum, VLAN, timestamp, protocol, and
+ * other fields within the skb.
+ **/
+static unsigned int fm10k_process_skb_fields(struct fm10k_ring *rx_ring,
+ union fm10k_rx_desc *rx_desc,
+ struct sk_buff *skb)
+{
+ unsigned int len = skb->len;
+
+ FM10K_CB(skb)->fi.w.vlan = rx_desc->w.vlan;
+
+ skb_record_rx_queue(skb, rx_ring->queue_index);
+
+ FM10K_CB(skb)->fi.d.glort = rx_desc->d.glort;
+
+ if (rx_desc->w.vlan) {
+ u16 vid = le16_to_cpu(rx_desc->w.vlan);
+
+ if (vid != rx_ring->vid)
+ __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), vid);
+ }
+
+ skb->protocol = eth_type_trans(skb, rx_ring->netdev);
+
+ return len;
+}
+
+/**
+ * fm10k_is_non_eop - process handling of non-EOP buffers
+ * @rx_ring: Rx ring being processed
+ * @rx_desc: Rx descriptor for current buffer
+ *
+ * This function updates next to clean. If the buffer is an EOP buffer
+ * this function exits returning false, otherwise it will place the
+ * sk_buff in the next buffer to be chained and return true indicating
+ * that this is in fact a non-EOP buffer.
+ **/
+static bool fm10k_is_non_eop(struct fm10k_ring *rx_ring,
+ union fm10k_rx_desc *rx_desc)
+{
+ u32 ntc = rx_ring->next_to_clean + 1;
+
+ /* fetch, update, and store next to clean */
+ ntc = (ntc < rx_ring->count) ? ntc : 0;
+ rx_ring->next_to_clean = ntc;
+
+ prefetch(FM10K_RX_DESC(rx_ring, ntc));
+
+ if (likely(fm10k_test_staterr(rx_desc, FM10K_RXD_STATUS_EOP)))
+ return false;
+
+ return true;
+}
+
+/**
+ * fm10k_pull_tail - fm10k specific version of skb_pull_tail
+ * @rx_ring: rx descriptor ring packet is being transacted on
+ * @rx_desc: pointer to the EOP Rx descriptor
+ * @skb: pointer to current skb being adjusted
+ *
+ * This function is an fm10k specific version of __pskb_pull_tail. The
+ * main difference between this version and the original function is that
+ * this function can make several assumptions about the state of things
+ * that allow for significant optimizations versus the standard function.
+ * As a result we can do things like drop a frag and maintain an accurate
+ * truesize for the skb.
+ */
+static void fm10k_pull_tail(struct fm10k_ring *rx_ring,
+ union fm10k_rx_desc *rx_desc,
+ struct sk_buff *skb)
+{
+ struct skb_frag_struct *frag = &skb_shinfo(skb)->frags[0];
+ unsigned char *va;
+ unsigned int pull_len;
+
+ /* it is valid to use page_address instead of kmap since we are
+ * working with pages allocated out of the lomem pool per
+ * alloc_page(GFP_ATOMIC)
+ */
+ va = skb_frag_address(frag);
+
+ /* we need the header to contain the greater of either ETH_HLEN or
+ * 60 bytes if the skb->len is less than 60 for skb_pad.
+ */
+ pull_len = eth_get_headlen(va, FM10K_RX_HDR_LEN);
+
+ /* align pull length to size of long to optimize memcpy performance */
+ skb_copy_to_linear_data(skb, va, ALIGN(pull_len, sizeof(long)));
+
+ /* update all of the pointers */
+ skb_frag_size_sub(frag, pull_len);
+ frag->page_offset += pull_len;
+ skb->data_len -= pull_len;
+ skb->tail += pull_len;
+}
+
+/**
+ * fm10k_cleanup_headers - Correct corrupted or empty headers
+ * @rx_ring: rx descriptor ring packet is being transacted on
+ * @rx_desc: pointer to the EOP Rx descriptor
+ * @skb: pointer to current skb being fixed
+ *
+ * Address the case where we are pulling data in on pages only
+ * and as such no data is present in the skb header.
+ *
+ * In addition if skb is not at least 60 bytes we need to pad it so that
+ * it is large enough to qualify as a valid Ethernet frame.
+ *
+ * Returns true if an error was encountered and skb was freed.
+ **/
+static bool fm10k_cleanup_headers(struct fm10k_ring *rx_ring,
+ union fm10k_rx_desc *rx_desc,
+ struct sk_buff *skb)
+{
+ if (unlikely((fm10k_test_staterr(rx_desc,
+ FM10K_RXD_STATUS_RXE)))) {
+ dev_kfree_skb_any(skb);
+ rx_ring->rx_stats.errors++;
+ return true;
+ }
+
+ /* place header in linear portion of buffer */
+ if (skb_is_nonlinear(skb))
+ fm10k_pull_tail(rx_ring, rx_desc, skb);
+
+ /* if skb_pad returns an error the skb was freed */
+ if (unlikely(skb->len < 60)) {
+ int pad_len = 60 - skb->len;
+
+ if (skb_pad(skb, pad_len))
+ return true;
+ __skb_put(skb, pad_len);
+ }
+
+ return false;
+}
+
+/**
+ * fm10k_receive_skb - helper function to handle rx indications
+ * @q_vector: structure containing interrupt and ring information
+ * @skb: packet to send up
+ **/
+static void fm10k_receive_skb(struct fm10k_q_vector *q_vector,
+ struct sk_buff *skb)
+{
+ napi_gro_receive(&q_vector->napi, skb);
+}
+
+static bool fm10k_clean_rx_irq(struct fm10k_q_vector *q_vector,
+ struct fm10k_ring *rx_ring,
+ int budget)
+{
+ struct sk_buff *skb = rx_ring->skb;
+ unsigned int total_bytes = 0, total_packets = 0;
+ u16 cleaned_count = fm10k_desc_unused(rx_ring);
+
+ do {
+ union fm10k_rx_desc *rx_desc;
+
+ /* return some buffers to hardware, one at a time is too slow */
+ if (cleaned_count >= FM10K_RX_BUFFER_WRITE) {
+ fm10k_alloc_rx_buffers(rx_ring, cleaned_count);
+ cleaned_count = 0;
+ }
+
+ rx_desc = FM10K_RX_DESC(rx_ring, rx_ring->next_to_clean);
+
+ if (!fm10k_test_staterr(rx_desc, FM10K_RXD_STATUS_DD))
+ break;
+
+ /* This memory barrier is needed to keep us from reading
+ * any other fields out of the rx_desc until we know the
+ * RXD_STATUS_DD bit is set
+ */
+ rmb();
+
+ /* retrieve a buffer from the ring */
+ skb = fm10k_fetch_rx_buffer(rx_ring, rx_desc, skb);
+
+ /* exit if we failed to retrieve a buffer */
+ if (!skb)
+ break;
+
+ cleaned_count++;
+
+ /* fetch next buffer in frame if non-eop */
+ if (fm10k_is_non_eop(rx_ring, rx_desc))
+ continue;
+
+ /* verify the packet layout is correct */
+ if (fm10k_cleanup_headers(rx_ring, rx_desc, skb)) {
+ skb = NULL;
+ continue;
+ }
+
+ /* populate checksum, timestamp, VLAN, and protocol */
+ total_bytes += fm10k_process_skb_fields(rx_ring, rx_desc, skb);
+
+ fm10k_receive_skb(q_vector, skb);
+
+ /* reset skb pointer */
+ skb = NULL;
+
+ /* update budget accounting */
+ total_packets++;
+ } while (likely(total_packets < budget));
+
+ /* place incomplete frames back on ring for completion */
+ rx_ring->skb = skb;
+
+ u64_stats_update_begin(&rx_ring->syncp);
+ rx_ring->stats.packets += total_packets;
+ rx_ring->stats.bytes += total_bytes;
+ u64_stats_update_end(&rx_ring->syncp);
+ q_vector->rx.total_packets += total_packets;
+ q_vector->rx.total_bytes += total_bytes;
+
+ return total_packets < budget;
+}
+
+static bool fm10k_tx_desc_push(struct fm10k_ring *tx_ring,
+ struct fm10k_tx_desc *tx_desc, u16 i,
+ dma_addr_t dma, unsigned int size, u8 desc_flags)
+{
+ /* set RS and INT for last frame in a cache line */
+ if ((++i & (FM10K_TXD_WB_FIFO_SIZE - 1)) == 0)
+ desc_flags |= FM10K_TXD_FLAG_RS | FM10K_TXD_FLAG_INT;
+
+ /* record values to descriptor */
+ tx_desc->buffer_addr = cpu_to_le64(dma);
+ tx_desc->flags = desc_flags;
+ tx_desc->buflen = cpu_to_le16(size);
+
+ /* return true if we just wrapped the ring */
+ return i == tx_ring->count;
+}
+
+static void fm10k_tx_map(struct fm10k_ring *tx_ring,
+ struct fm10k_tx_buffer *first)
+{
+ struct sk_buff *skb = first->skb;
+ struct fm10k_tx_buffer *tx_buffer;
+ struct fm10k_tx_desc *tx_desc;
+ struct skb_frag_struct *frag;
+ unsigned char *data;
+ dma_addr_t dma;
+ unsigned int data_len, size;
+ u16 i = tx_ring->next_to_use;
+ u8 flags = 0;
+
+ tx_desc = FM10K_TX_DESC(tx_ring, i);
+
+ /* add HW VLAN tag */
+ if (vlan_tx_tag_present(skb))
+ tx_desc->vlan = cpu_to_le16(vlan_tx_tag_get(skb));
+ else
+ tx_desc->vlan = 0;
+
+ size = skb_headlen(skb);
+ data = skb->data;
+
+ dma = dma_map_single(tx_ring->dev, data, size, DMA_TO_DEVICE);
+
+ data_len = skb->data_len;
+ tx_buffer = first;
+
+ for (frag = &skb_shinfo(skb)->frags[0];; frag++) {
+ if (dma_mapping_error(tx_ring->dev, dma))
+ goto dma_error;
+
+ /* record length, and DMA address */
+ dma_unmap_len_set(tx_buffer, len, size);
+ dma_unmap_addr_set(tx_buffer, dma, dma);
+
+ while (unlikely(size > FM10K_MAX_DATA_PER_TXD)) {
+ if (fm10k_tx_desc_push(tx_ring, tx_desc++, i++, dma,
+ FM10K_MAX_DATA_PER_TXD, flags)) {
+ tx_desc = FM10K_TX_DESC(tx_ring, 0);
+ i = 0;
+ }
+
+ dma += FM10K_MAX_DATA_PER_TXD;
+ size -= FM10K_MAX_DATA_PER_TXD;
+ }
+
+ if (likely(!data_len))
+ break;
+
+ if (fm10k_tx_desc_push(tx_ring, tx_desc++, i++,
+ dma, size, flags)) {
+ tx_desc = FM10K_TX_DESC(tx_ring, 0);
+ i = 0;
+ }
+
+ size = skb_frag_size(frag);
+ data_len -= size;
+
+ dma = skb_frag_dma_map(tx_ring->dev, frag, 0, size,
+ DMA_TO_DEVICE);
+
+ tx_buffer = &tx_ring->tx_buffer[i];
+ }
+
+ /* write last descriptor with LAST bit set */
+ flags |= FM10K_TXD_FLAG_LAST;
+
+ if (fm10k_tx_desc_push(tx_ring, tx_desc, i++, dma, size, flags))
+ i = 0;
+
+ /* record bytecount for BQL */
+ netdev_tx_sent_queue(txring_txq(tx_ring), first->bytecount);
+
+ /* record SW timestamp if HW timestamp is not available */
+ skb_tx_timestamp(first->skb);
+
+ /* Force memory writes to complete before letting h/w know there
+ * are new descriptors to fetch. (Only applicable for weak-ordered
+ * memory model archs, such as IA-64).
+ *
+ * We also need this memory barrier to make certain all of the
+ * status bits have been updated before next_to_watch is written.
+ */
+ wmb();
+
+ /* set next_to_watch value indicating a packet is present */
+ first->next_to_watch = tx_desc;
+
+ tx_ring->next_to_use = i;
+
+ /* notify HW of packet */
+ writel(i, tx_ring->tail);
+
+ /* we need this if more than one processor can write to our tail
+ * at a time, it synchronizes IO on IA64/Altix systems
+ */
+ mmiowb();
+
+ return;
+dma_error:
+ dev_err(tx_ring->dev, "TX DMA map failed\n");
+
+ /* clear dma mappings for failed tx_buffer map */
+ for (;;) {
+ tx_buffer = &tx_ring->tx_buffer[i];
+ fm10k_unmap_and_free_tx_resource(tx_ring, tx_buffer);
+ if (tx_buffer == first)
+ break;
+ if (i == 0)
+ i = tx_ring->count;
+ i--;
+ }
+
+ tx_ring->next_to_use = i;
+}
+
+static int __fm10k_maybe_stop_tx(struct fm10k_ring *tx_ring, u16 size)
+{
+ netif_stop_subqueue(tx_ring->netdev, tx_ring->queue_index);
+
+ smp_mb();
+
+ /* We need to check again in a case another CPU has just
+ * made room available. */
+ if (likely(fm10k_desc_unused(tx_ring) < size))
+ return -EBUSY;
+
+ /* A reprieve! - use start_queue because it doesn't call schedule */
+ netif_start_subqueue(tx_ring->netdev, tx_ring->queue_index);
+ ++tx_ring->tx_stats.restart_queue;
+ return 0;
+}
+
+static inline int fm10k_maybe_stop_tx(struct fm10k_ring *tx_ring, u16 size)
+{
+ if (likely(fm10k_desc_unused(tx_ring) >= size))
+ return 0;
+ return __fm10k_maybe_stop_tx(tx_ring, size);
+}
+
+netdev_tx_t fm10k_xmit_frame_ring(struct sk_buff *skb,
+ struct fm10k_ring *tx_ring)
+{
+ struct fm10k_tx_buffer *first;
+ u32 tx_flags = 0;
+#if PAGE_SIZE > FM10K_MAX_DATA_PER_TXD
+ unsigned short f;
+#endif
+ u16 count = TXD_USE_COUNT(skb_headlen(skb));
+
+ /* need: 1 descriptor per page * PAGE_SIZE/FM10K_MAX_DATA_PER_TXD,
+ * + 1 desc for skb_headlen/FM10K_MAX_DATA_PER_TXD,
+ * + 2 desc gap to keep tail from touching head
+ * otherwise try next time
+ */
+#if PAGE_SIZE > FM10K_MAX_DATA_PER_TXD
+ for (f = 0; f < skb_shinfo(skb)->nr_frags; f++)
+ count += TXD_USE_COUNT(skb_shinfo(skb)->frags[f].size);
+#else
+ count += skb_shinfo(skb)->nr_frags;
+#endif
+ if (fm10k_maybe_stop_tx(tx_ring, count + 3)) {
+ tx_ring->tx_stats.tx_busy++;
+ return NETDEV_TX_BUSY;
+ }
+
+ /* record the location of the first descriptor for this packet */
+ first = &tx_ring->tx_buffer[tx_ring->next_to_use];
+ first->skb = skb;
+ first->bytecount = max_t(unsigned int, skb->len, ETH_ZLEN);
+ first->gso_segs = 1;
+
+ /* record initial flags and protocol */
+ first->tx_flags = tx_flags;
+
+ fm10k_tx_map(tx_ring, first);
+
+ fm10k_maybe_stop_tx(tx_ring, DESC_NEEDED);
+
+ return NETDEV_TX_OK;
+}
+
+static u64 fm10k_get_tx_completed(struct fm10k_ring *ring)
+{
+ return ring->stats.packets;
+}
+
+static u64 fm10k_get_tx_pending(struct fm10k_ring *ring)
+{
+ /* use SW head and tail until we have real hardware */
+ u32 head = ring->next_to_clean;
+ u32 tail = ring->next_to_use;
+
+ return ((head <= tail) ? tail : tail + ring->count) - head;
+}
+
+bool fm10k_check_tx_hang(struct fm10k_ring *tx_ring)
+{
+ u32 tx_done = fm10k_get_tx_completed(tx_ring);
+ u32 tx_done_old = tx_ring->tx_stats.tx_done_old;
+ u32 tx_pending = fm10k_get_tx_pending(tx_ring);
+
+ clear_check_for_tx_hang(tx_ring);
+
+ /* Check for a hung queue, but be thorough. This verifies
+ * that a transmit has been completed since the previous
+ * check AND there is at least one packet pending. By
+ * requiring this to fail twice we avoid races with
+ * clearing the ARMED bit and conditions where we
+ * run the check_tx_hang logic with a transmit completion
+ * pending but without time to complete it yet.
+ */
+ if (!tx_pending || (tx_done_old != tx_done)) {
+ /* update completed stats and continue */
+ tx_ring->tx_stats.tx_done_old = tx_done;
+ /* reset the countdown */
+ clear_bit(__FM10K_HANG_CHECK_ARMED, &tx_ring->state);
+
+ return false;
+ }
+
+ /* make sure it is true for two checks in a row */
+ return test_and_set_bit(__FM10K_HANG_CHECK_ARMED, &tx_ring->state);
+}
+
+/**
+ * fm10k_tx_timeout_reset - initiate reset due to Tx timeout
+ * @interface: driver private struct
+ **/
+void fm10k_tx_timeout_reset(struct fm10k_intfc *interface)
+{
+ /* Do the reset outside of interrupt context */
+ if (!test_bit(__FM10K_DOWN, &interface->state)) {
+ netdev_err(interface->netdev, "Reset interface\n");
+ interface->tx_timeout_count++;
+ interface->flags |= FM10K_FLAG_RESET_REQUESTED;
+ fm10k_service_event_schedule(interface);
+ }
+}
+
+/**
+ * fm10k_clean_tx_irq - Reclaim resources after transmit completes
+ * @q_vector: structure containing interrupt and ring information
+ * @tx_ring: tx ring to clean
+ **/
+static bool fm10k_clean_tx_irq(struct fm10k_q_vector *q_vector,
+ struct fm10k_ring *tx_ring)
+{
+ struct fm10k_intfc *interface = q_vector->interface;
+ struct fm10k_tx_buffer *tx_buffer;
+ struct fm10k_tx_desc *tx_desc;
+ unsigned int total_bytes = 0, total_packets = 0;
+ unsigned int budget = q_vector->tx.work_limit;
+ unsigned int i = tx_ring->next_to_clean;
+
+ if (test_bit(__FM10K_DOWN, &interface->state))
+ return true;
+
+ tx_buffer = &tx_ring->tx_buffer[i];
+ tx_desc = FM10K_TX_DESC(tx_ring, i);
+ i -= tx_ring->count;
+
+ do {
+ struct fm10k_tx_desc *eop_desc = tx_buffer->next_to_watch;
+
+ /* if next_to_watch is not set then there is no work pending */
+ if (!eop_desc)
+ break;
+
+ /* prevent any other reads prior to eop_desc */
+ read_barrier_depends();
+
+ /* if DD is not set pending work has not been completed */
+ if (!(eop_desc->flags & FM10K_TXD_FLAG_DONE))
+ break;
+
+ /* clear next_to_watch to prevent false hangs */
+ tx_buffer->next_to_watch = NULL;
+
+ /* update the statistics for this packet */
+ total_bytes += tx_buffer->bytecount;
+ total_packets += tx_buffer->gso_segs;
+
+ /* free the skb */
+ dev_consume_skb_any(tx_buffer->skb);
+
+ /* unmap skb header data */
+ dma_unmap_single(tx_ring->dev,
+ dma_unmap_addr(tx_buffer, dma),
+ dma_unmap_len(tx_buffer, len),
+ DMA_TO_DEVICE);
+
+ /* clear tx_buffer data */
+ tx_buffer->skb = NULL;
+ dma_unmap_len_set(tx_buffer, len, 0);
+
+ /* unmap remaining buffers */
+ while (tx_desc != eop_desc) {
+ tx_buffer++;
+ tx_desc++;
+ i++;
+ if (unlikely(!i)) {
+ i -= tx_ring->count;
+ tx_buffer = tx_ring->tx_buffer;
+ tx_desc = FM10K_TX_DESC(tx_ring, 0);
+ }
+
+ /* unmap any remaining paged data */
+ if (dma_unmap_len(tx_buffer, len)) {
+ dma_unmap_page(tx_ring->dev,
+ dma_unmap_addr(tx_buffer, dma),
+ dma_unmap_len(tx_buffer, len),
+ DMA_TO_DEVICE);
+ dma_unmap_len_set(tx_buffer, len, 0);
+ }
+ }
+
+ /* move us one more past the eop_desc for start of next pkt */
+ tx_buffer++;
+ tx_desc++;
+ i++;
+ if (unlikely(!i)) {
+ i -= tx_ring->count;
+ tx_buffer = tx_ring->tx_buffer;
+ tx_desc = FM10K_TX_DESC(tx_ring, 0);
+ }
+
+ /* issue prefetch for next Tx descriptor */
+ prefetch(tx_desc);
+
+ /* update budget accounting */
+ budget--;
+ } while (likely(budget));
+
+ i += tx_ring->count;
+ tx_ring->next_to_clean = i;
+ u64_stats_update_begin(&tx_ring->syncp);
+ tx_ring->stats.bytes += total_bytes;
+ tx_ring->stats.packets += total_packets;
+ u64_stats_update_end(&tx_ring->syncp);
+ q_vector->tx.total_bytes += total_bytes;
+ q_vector->tx.total_packets += total_packets;
+
+ if (check_for_tx_hang(tx_ring) && fm10k_check_tx_hang(tx_ring)) {
+ /* schedule immediate reset if we believe we hung */
+ struct fm10k_hw *hw = &interface->hw;
+
+ netif_err(interface, drv, tx_ring->netdev,
+ "Detected Tx Unit Hang\n"
+ " Tx Queue <%d>\n"
+ " TDH, TDT <%x>, <%x>\n"
+ " next_to_use <%x>\n"
+ " next_to_clean <%x>\n",
+ tx_ring->queue_index,
+ fm10k_read_reg(hw, FM10K_TDH(tx_ring->reg_idx)),
+ fm10k_read_reg(hw, FM10K_TDT(tx_ring->reg_idx)),
+ tx_ring->next_to_use, i);
+
+ netif_stop_subqueue(tx_ring->netdev,
+ tx_ring->queue_index);
+
+ netif_info(interface, probe, tx_ring->netdev,
+ "tx hang %d detected on queue %d, resetting interface\n",
+ interface->tx_timeout_count + 1,
+ tx_ring->queue_index);
+
+ fm10k_tx_timeout_reset(interface);
+
+ /* the netdev is about to reset, no point in enabling stuff */
+ return true;
+ }
+
+ /* notify netdev of completed buffers */
+ netdev_tx_completed_queue(txring_txq(tx_ring),
+ total_packets, total_bytes);
+
+#define TX_WAKE_THRESHOLD min_t(u16, FM10K_MIN_TXD - 1, DESC_NEEDED * 2)
+ if (unlikely(total_packets && netif_carrier_ok(tx_ring->netdev) &&
+ (fm10k_desc_unused(tx_ring) >= TX_WAKE_THRESHOLD))) {
+ /* Make sure that anybody stopping the queue after this
+ * sees the new next_to_clean.
+ */
+ smp_mb();
+ if (__netif_subqueue_stopped(tx_ring->netdev,
+ tx_ring->queue_index) &&
+ !test_bit(__FM10K_DOWN, &interface->state)) {
+ netif_wake_subqueue(tx_ring->netdev,
+ tx_ring->queue_index);
+ ++tx_ring->tx_stats.restart_queue;
+ }
+ }
+
+ return !!budget;
+}
+
/**
* fm10k_update_itr - update the dynamic ITR value based on packet size
*
{
struct fm10k_q_vector *q_vector =
container_of(napi, struct fm10k_q_vector, napi);
+ struct fm10k_ring *ring;
+ int per_ring_budget;
+ bool clean_complete = true;
+
+ fm10k_for_each_ring(ring, q_vector->tx)
+ clean_complete &= fm10k_clean_tx_irq(q_vector, ring);
+
+ /* attempt to distribute budget to each queue fairly, but don't
+ * allow the budget to go below 1 because we'll exit polling
+ */
+ if (q_vector->rx.count > 1)
+ per_ring_budget = max(budget/q_vector->rx.count, 1);
+ else
+ per_ring_budget = budget;
+
+ fm10k_for_each_ring(ring, q_vector->rx)
+ clean_complete &= fm10k_clean_rx_irq(q_vector, ring,
+ per_ring_budget);
+
+ /* If all work not completed, return budget and keep polling */
+ if (!clean_complete)
+ return budget;
/* all work done, exit the polling mode */
napi_complete(napi);
projects / GitHub / LineageOS / G12 / android_kernel_amlogic_linux-4.9.git / commitdiff