i2c-nomadik: use pm_runtime API

Use the pm_runtime API for pins control.

Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Reviewed-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Reviewed-by: Jonas Aberg <jonas.aberg@stericsson.com>
[deleted some surplus runtime PM code]
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

diff --git a/drivers/i2c/busses/i2c-nomadik.c b/drivers/i2c/busses/i2c-nomadik.c
index c8bf81abcd3cb5b2ef440328e1bdf7a2a0f60329..234e4a9070b82a5a57ca873629e25dc8dc4a83d1 100644 (file)
--- a/drivers/i2c/busses/i2c-nomadik.c
+++ b/drivers/i2c/busses/i2c-nomadik.c
@@ -23,6 +23,7 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/regulator/consumer.h>
+#include <linux/pm_runtime.h>
 
 #include <plat/i2c.h>
 
@@ -576,6 +577,7 @@ static int nmk_i2c_xfer(struct i2c_adapter *i2c_adap,
 
        if (dev->regulator)
                regulator_enable(dev->regulator);
+       pm_runtime_get_sync(&dev->pdev->dev);
 
        status = init_hw(dev);
        if (status)
@@ -634,6 +636,7 @@ static int nmk_i2c_xfer(struct i2c_adapter *i2c_adap,
 out:
        clk_disable(dev->clk);
 out2:
+       pm_runtime_put_sync(&dev->pdev->dev);
        if (dev->regulator)
                regulator_disable(dev->regulator);
 
@@ -839,19 +842,36 @@ static irqreturn_t i2c_irq_handler(int irq, void *arg)
 
 
 #ifdef CONFIG_PM
-static int nmk_i2c_suspend(struct platform_device *pdev, pm_message_t mesg)
+static int nmk_i2c_suspend(struct device *dev)
 {
-       struct nmk_i2c_dev *dev = platform_get_drvdata(pdev);
+       struct platform_device *pdev = to_platform_device(dev);
+       struct nmk_i2c_dev *nmk_i2c = platform_get_drvdata(pdev);
 
-       if (dev->busy)
+       if (nmk_i2c->busy)
                return -EBUSY;
-       else
-               return 0;
+
+       return 0;
+}
+
+static int nmk_i2c_resume(struct device *dev)
+{
+       return 0;
 }
 #else
 #define nmk_i2c_suspend        NULL
+#define nmk_i2c_resume NULL
 #endif
 
+/*
+ * We use noirq so that we suspend late and resume before the wakeup interrupt
+ * to ensure that we do the !pm_runtime_suspended() check in resume before
+ * there has been a regular pm runtime resume (via pm_runtime_get_sync()).
+ */
+static const struct dev_pm_ops nmk_i2c_pm = {
+       .suspend_noirq  = nmk_i2c_suspend,
+       .resume_noirq   = nmk_i2c_resume,
+};
+
 static unsigned int nmk_i2c_functionality(struct i2c_adapter *adap)
 {
        return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
@@ -913,6 +933,9 @@ static int __devinit nmk_i2c_probe(struct platform_device *pdev)
                dev->regulator = NULL;
        }
 
+       pm_suspend_ignore_children(&pdev->dev, true);
+       pm_runtime_enable(&pdev->dev);
+
        dev->clk = clk_get(&pdev->dev, NULL);
        if (IS_ERR(dev->clk)) {
                dev_err(&pdev->dev, "could not get i2c clock\n");
@@ -958,6 +981,7 @@ static int __devinit nmk_i2c_probe(struct platform_device *pdev)
  err_no_clk:
        if (dev->regulator)
                regulator_put(dev->regulator);
+       pm_runtime_disable(&pdev->dev);
        free_irq(dev->irq, dev);
  err_irq:
        iounmap(dev->virtbase);
@@ -990,6 +1014,7 @@ static int __devexit nmk_i2c_remove(struct platform_device *pdev)
        clk_put(dev->clk);
        if (dev->regulator)
                regulator_put(dev->regulator);
+       pm_runtime_disable(&pdev->dev);
        platform_set_drvdata(pdev, NULL);
        kfree(dev);
 
@@ -1000,10 +1025,10 @@ static struct platform_driver nmk_i2c_driver = {
        .driver = {
                .owner = THIS_MODULE,
                .name = DRIVER_NAME,
+               .pm = &nmk_i2c_pm,
        },
        .probe = nmk_i2c_probe,
        .remove = __devexit_p(nmk_i2c_remove),
-       .suspend = nmk_i2c_suspend,
 };
 
 static int __init nmk_i2c_init(void)