image-$(CONFIG_TQM8555) += cuImage.tqm8555
image-$(CONFIG_TQM8560) += cuImage.tqm8560
image-$(CONFIG_SBC8548) += cuImage.sbc8548
-image-$(CONFIG_SBC8560) += cuImage.sbc8560
image-$(CONFIG_KSI8560) += cuImage.ksi8560
# Board ports in arch/powerpc/platform/embedded6xx/Kconfig
+++ /dev/null
-/*
- * SBC8560 Device Tree Source
- *
- * Copyright 2007 Wind River Systems Inc.
- *
- * Paul Gortmaker (see MAINTAINERS for contact information)
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-/dts-v1/;
-
-/ {
- model = "SBC8560";
- compatible = "SBC8560";
- #address-cells = <1>;
- #size-cells = <1>;
-
- aliases {
- ethernet0 = &enet0;
- ethernet1 = &enet1;
- ethernet2 = &enet2;
- ethernet3 = &enet3;
- serial0 = &serial0;
- serial1 = &serial1;
- pci0 = &pci0;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- PowerPC,8560@0 {
- device_type = "cpu";
- reg = <0>;
- d-cache-line-size = <0x20>; // 32 bytes
- i-cache-line-size = <0x20>; // 32 bytes
- d-cache-size = <0x8000>; // L1, 32K
- i-cache-size = <0x8000>; // L1, 32K
- timebase-frequency = <0>; // From uboot
- bus-frequency = <0>;
- clock-frequency = <0>;
- next-level-cache = <&L2>;
- };
- };
-
- memory {
- device_type = "memory";
- reg = <0x00000000 0x20000000>;
- };
-
- soc@ff700000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- ranges = <0x0 0xff700000 0x00100000>;
- clock-frequency = <0>;
-
- ecm-law@0 {
- compatible = "fsl,ecm-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <8>;
- };
-
- ecm@1000 {
- compatible = "fsl,mpc8560-ecm", "fsl,ecm";
- reg = <0x1000 0x1000>;
- interrupts = <17 2>;
- interrupt-parent = <&mpic>;
- };
-
- memory-controller@2000 {
- compatible = "fsl,mpc8560-memory-controller";
- reg = <0x2000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <0x12 0x2>;
- };
-
- L2: l2-cache-controller@20000 {
- compatible = "fsl,mpc8560-l2-cache-controller";
- reg = <0x20000 0x1000>;
- cache-line-size = <0x20>; // 32 bytes
- cache-size = <0x40000>; // L2, 256K
- interrupt-parent = <&mpic>;
- interrupts = <0x10 0x2>;
- };
-
- i2c@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <0x2b 0x2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- };
-
- i2c@3100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x3100 0x100>;
- interrupts = <0x2b 0x2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- };
-
- dma@21300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8560-dma", "fsl,eloplus-dma";
- reg = <0x21300 0x4>;
- ranges = <0x0 0x21100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,mpc8560-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <20 2>;
- };
- dma-channel@80 {
- compatible = "fsl,mpc8560-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <21 2>;
- };
- dma-channel@100 {
- compatible = "fsl,mpc8560-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <22 2>;
- };
- dma-channel@180 {
- compatible = "fsl,mpc8560-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <23 2>;
- };
- };
-
- enet0: ethernet@24000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <0>;
- device_type = "network";
- model = "TSEC";
- compatible = "gianfar";
- reg = <0x24000 0x1000>;
- ranges = <0x0 0x24000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>;
- interrupt-parent = <&mpic>;
- tbi-handle = <&tbi0>;
- phy-handle = <&phy0>;
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x520 0x20>;
- phy0: ethernet-phy@19 {
- interrupt-parent = <&mpic>;
- interrupts = <0x6 0x1>;
- reg = <0x19>;
- device_type = "ethernet-phy";
- };
- phy1: ethernet-phy@1a {
- interrupt-parent = <&mpic>;
- interrupts = <0x7 0x1>;
- reg = <0x1a>;
- device_type = "ethernet-phy";
- };
- phy2: ethernet-phy@1b {
- interrupt-parent = <&mpic>;
- interrupts = <0x8 0x1>;
- reg = <0x1b>;
- device_type = "ethernet-phy";
- };
- phy3: ethernet-phy@1c {
- interrupt-parent = <&mpic>;
- interrupts = <0x8 0x1>;
- reg = <0x1c>;
- device_type = "ethernet-phy";
- };
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- enet1: ethernet@25000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <1>;
- device_type = "network";
- model = "TSEC";
- compatible = "gianfar";
- reg = <0x25000 0x1000>;
- ranges = <0x0 0x25000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <0x23 0x2 0x24 0x2 0x28 0x2>;
- interrupt-parent = <&mpic>;
- tbi-handle = <&tbi1>;
- phy-handle = <&phy1>;
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- mpic: pic@40000 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- compatible = "chrp,open-pic";
- reg = <0x40000 0x40000>;
- device_type = "open-pic";
- };
-
- cpm@919c0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8560-cpm", "fsl,cpm2";
- reg = <0x919c0 0x30>;
- ranges;
-
- muram@80000 {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0x80000 0x10000>;
-
- data@0 {
- compatible = "fsl,cpm-muram-data";
- reg = <0x0 0x4000 0x9000 0x2000>;
- };
- };
-
- brg@919f0 {
- compatible = "fsl,mpc8560-brg",
- "fsl,cpm2-brg",
- "fsl,cpm-brg";
- reg = <0x919f0 0x10 0x915f0 0x10>;
- clock-frequency = <165000000>;
- };
-
- cpmpic: pic@90c00 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- interrupts = <0x2e 0x2>;
- interrupt-parent = <&mpic>;
- reg = <0x90c00 0x80>;
- compatible = "fsl,mpc8560-cpm-pic", "fsl,cpm2-pic";
- };
-
- enet2: ethernet@91320 {
- device_type = "network";
- compatible = "fsl,mpc8560-fcc-enet",
- "fsl,cpm2-fcc-enet";
- reg = <0x91320 0x20 0x88500 0x100 0x913b0 0x1>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- fsl,cpm-command = <0x16200300>;
- interrupts = <0x21 0x8>;
- interrupt-parent = <&cpmpic>;
- phy-handle = <&phy2>;
- };
-
- enet3: ethernet@91340 {
- device_type = "network";
- compatible = "fsl,mpc8560-fcc-enet",
- "fsl,cpm2-fcc-enet";
- reg = <0x91340 0x20 0x88600 0x100 0x913d0 0x1>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- fsl,cpm-command = <0x1a400300>;
- interrupts = <0x22 0x8>;
- interrupt-parent = <&cpmpic>;
- phy-handle = <&phy3>;
- };
- };
-
- global-utilities@e0000 {
- compatible = "fsl,mpc8560-guts";
- reg = <0xe0000 0x1000>;
- };
- };
-
- pci0: pci@ff708000 {
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
- device_type = "pci";
- reg = <0xff708000 0x1000>;
- clock-frequency = <66666666>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
-
- /* IDSEL 0x02 */
- 0x1000 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x1000 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x1000 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x1000 0x0 0x0 0x4 &mpic 0x5 0x1>;
-
- interrupt-parent = <&mpic>;
- interrupts = <0x18 0x2>;
- bus-range = <0x0 0x0>;
- ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x20000000
- 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
- };
-
- localbus@ff705000 {
- compatible = "fsl,mpc8560-localbus", "simple-bus";
- #address-cells = <2>;
- #size-cells = <1>;
- reg = <0xff705000 0x100>; // BRx, ORx, etc.
-
- ranges = <
- 0x0 0x0 0xff800000 0x0800000 // 8MB boot flash
- 0x1 0x0 0xe4000000 0x4000000 // 64MB flash
- 0x3 0x0 0x20000000 0x4000000 // 64MB SDRAM
- 0x4 0x0 0x24000000 0x4000000 // 64MB SDRAM
- 0x5 0x0 0xfc000000 0x0c00000 // EPLD
- 0x6 0x0 0xe0000000 0x4000000 // 64MB flash
- 0x7 0x0 0x80000000 0x0200000 // ATM1,2
- >;
-
- epld@5,0 {
- compatible = "wrs,epld-localbus";
- #address-cells = <2>;
- #size-cells = <1>;
- reg = <0x5 0x0 0xc00000>;
- ranges = <
- 0x0 0x0 0x5 0x000000 0x1fff // LED disp.
- 0x1 0x0 0x5 0x100000 0x1fff // switches
- 0x2 0x0 0x5 0x200000 0x1fff // ID reg.
- 0x3 0x0 0x5 0x300000 0x1fff // status reg.
- 0x4 0x0 0x5 0x400000 0x1fff // reset reg.
- 0x5 0x0 0x5 0x500000 0x1fff // Wind port
- 0x7 0x0 0x5 0x700000 0x1fff // UART #1
- 0x8 0x0 0x5 0x800000 0x1fff // UART #2
- 0x9 0x0 0x5 0x900000 0x1fff // RTC
- 0xb 0x0 0x5 0xb00000 0x1fff // EEPROM
- >;
-
- bidr@2,0 {
- compatible = "wrs,sbc8560-bidr";
- reg = <0x2 0x0 0x10>;
- };
-
- bcsr@3,0 {
- compatible = "wrs,sbc8560-bcsr";
- reg = <0x3 0x0 0x10>;
- };
-
- brstcr@4,0 {
- compatible = "wrs,sbc8560-brstcr";
- reg = <0x4 0x0 0x10>;
- };
-
- serial0: serial@7,0 {
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x7 0x0 0x100>;
- clock-frequency = <1843200>;
- interrupts = <0x9 0x2>;
- interrupt-parent = <&mpic>;
- };
-
- serial1: serial@8,0 {
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x8 0x0 0x100>;
- clock-frequency = <1843200>;
- interrupts = <0xa 0x2>;
- interrupt-parent = <&mpic>;
- };
-
- rtc@9,0 {
- compatible = "m48t59";
- reg = <0x9 0x0 0x1fff>;
- };
- };
- };
-};
+++ /dev/null
-CONFIG_PPC_85xx=y
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EXPERT=y
-CONFIG_SLAB=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_SBC8560=y
-CONFIG_BINFMT_MISC=y
-CONFIG_SPARSE_IRQ=y
-# CONFIG_SECCOMP is not set
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_FW_LOADER is not set
-CONFIG_PROC_DEVICETREE=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_NETDEVICES=y
-CONFIG_BROADCOM_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-CONFIG_GIANFAR=y
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=2
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-# CONFIG_HW_RANDOM is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_M48T59=y
-CONFIG_INOTIFY=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_MSDOS_PARTITION is not set
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DETECT_HUNG_TASK=y
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_PPC_EARLY_DEBUG=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
help
This option enables support for the Wind River SBC8548 board
-config SBC8560
- bool "Wind River SBC8560"
- select DEFAULT_UIMAGE
- help
- This option enables support for the Wind River SBC8560 board
-
config GE_IMP3A
bool "GE Intelligent Platforms IMP3A"
select DEFAULT_UIMAGE
obj-$(CONFIG_P5020_DS) += p5020_ds.o corenet_ds.o
obj-$(CONFIG_STX_GP3) += stx_gp3.o
obj-$(CONFIG_TQM85xx) += tqm85xx.o
-obj-$(CONFIG_SBC8560) += sbc8560.o
obj-$(CONFIG_SBC8548) += sbc8548.o
obj-$(CONFIG_SOCRATES) += socrates.o socrates_fpga_pic.o
obj-$(CONFIG_KSI8560) += ksi8560.o
+++ /dev/null
-/*
- * Wind River SBC8560 setup and early boot code.
- *
- * Copyright 2007 Wind River Systems Inc.
- *
- * By Paul Gortmaker (see MAINTAINERS for contact information)
- *
- * Based largely on the MPC8560ADS support - Copyright 2005 Freescale Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/kdev_t.h>
-#include <linux/delay.h>
-#include <linux/seq_file.h>
-#include <linux/of_platform.h>
-
-#include <asm/time.h>
-#include <asm/machdep.h>
-#include <asm/pci-bridge.h>
-#include <asm/mpic.h>
-#include <mm/mmu_decl.h>
-#include <asm/udbg.h>
-
-#include <sysdev/fsl_soc.h>
-#include <sysdev/fsl_pci.h>
-
-#include "mpc85xx.h"
-
-#ifdef CONFIG_CPM2
-#include <asm/cpm2.h>
-#include <sysdev/cpm2_pic.h>
-#endif
-
-static void __init sbc8560_pic_init(void)
-{
- struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN,
- 0, 256, " OpenPIC ");
- BUG_ON(mpic == NULL);
- mpic_init(mpic);
-
- mpc85xx_cpm2_pic_init();
-}
-
-/*
- * Setup the architecture
- */
-#ifdef CONFIG_CPM2
-struct cpm_pin {
- int port, pin, flags;
-};
-
-static const struct cpm_pin sbc8560_pins[] = {
- /* SCC1 */
- {3, 29, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
- {3, 30, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
- {3, 31, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
-
- /* SCC2 */
- {3, 26, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
- {3, 27, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
- {3, 28, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
-
- /* FCC2 */
- {1, 18, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
- {1, 19, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
- {1, 20, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
- {1, 21, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
- {1, 22, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
- {1, 23, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
- {1, 24, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
- {1, 25, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
- {1, 26, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
- {1, 27, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
- {1, 28, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
- {1, 29, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
- {1, 30, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
- {1, 31, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
- {2, 18, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, /* CLK14 */
- {2, 19, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, /* CLK13 */
-
- /* FCC3 */
- {1, 4, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
- {1, 5, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
- {1, 6, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
- {1, 7, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
- {1, 8, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
- {1, 9, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
- {1, 10, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
- {1, 11, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
- {1, 12, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
- {1, 13, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
- {1, 14, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
- {1, 15, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
- {1, 16, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
- {1, 17, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
- {2, 16, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* CLK16 */
- {2, 17, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* CLK15 */
-};
-
-static void __init init_ioports(void)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(sbc8560_pins); i++) {
- const struct cpm_pin *pin = &sbc8560_pins[i];
- cpm2_set_pin(pin->port, pin->pin, pin->flags);
- }
-
- cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_RX);
- cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_TX);
- cpm2_clk_setup(CPM_CLK_SCC2, CPM_BRG2, CPM_CLK_RX);
- cpm2_clk_setup(CPM_CLK_SCC2, CPM_BRG2, CPM_CLK_TX);
- cpm2_clk_setup(CPM_CLK_FCC2, CPM_CLK13, CPM_CLK_RX);
- cpm2_clk_setup(CPM_CLK_FCC2, CPM_CLK14, CPM_CLK_TX);
- cpm2_clk_setup(CPM_CLK_FCC3, CPM_CLK15, CPM_CLK_RX);
- cpm2_clk_setup(CPM_CLK_FCC3, CPM_CLK16, CPM_CLK_TX);
-}
-#endif
-
-static void __init sbc8560_setup_arch(void)
-{
-#ifdef CONFIG_PCI
- struct device_node *np;
-#endif
-
- if (ppc_md.progress)
- ppc_md.progress("sbc8560_setup_arch()", 0);
-
-#ifdef CONFIG_CPM2
- cpm2_reset();
- init_ioports();
-#endif
-
-#ifdef CONFIG_PCI
- for_each_compatible_node(np, "pci", "fsl,mpc8540-pci")
- fsl_add_bridge(np, 1);
-#endif
-}
-
-static void sbc8560_show_cpuinfo(struct seq_file *m)
-{
- uint pvid, svid, phid1;
-
- pvid = mfspr(SPRN_PVR);
- svid = mfspr(SPRN_SVR);
-
- seq_printf(m, "Vendor\t\t: Wind River\n");
- seq_printf(m, "PVR\t\t: 0x%x\n", pvid);
- seq_printf(m, "SVR\t\t: 0x%x\n", svid);
-
- /* Display cpu Pll setting */
- phid1 = mfspr(SPRN_HID1);
- seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
-}
-
-machine_device_initcall(sbc8560, mpc85xx_common_publish_devices);
-
-/*
- * Called very early, device-tree isn't unflattened
- */
-static int __init sbc8560_probe(void)
-{
- unsigned long root = of_get_flat_dt_root();
-
- return of_flat_dt_is_compatible(root, "SBC8560");
-}
-
-#ifdef CONFIG_RTC_DRV_M48T59
-static int __init sbc8560_rtc_init(void)
-{
- struct device_node *np;
- struct resource res;
- struct platform_device *rtc_dev;
-
- np = of_find_compatible_node(NULL, NULL, "m48t59");
- if (np == NULL) {
- printk("No RTC in DTB. Has it been eaten by wild dogs?\n");
- return -ENODEV;
- }
-
- of_address_to_resource(np, 0, &res);
- of_node_put(np);
-
- printk("Found RTC (m48t59) at i/o 0x%x\n", res.start);
-
- rtc_dev = platform_device_register_simple("rtc-m48t59", 0, &res, 1);
-
- if (IS_ERR(rtc_dev)) {
- printk("Registering sbc8560 RTC device failed\n");
- return PTR_ERR(rtc_dev);
- }
-
- return 0;
-}
-
-arch_initcall(sbc8560_rtc_init);
-
-#endif /* M48T59 */
-
-static __u8 __iomem *brstcr;
-
-static int __init sbc8560_bdrstcr_init(void)
-{
- struct device_node *np;
- struct resource res;
-
- np = of_find_compatible_node(NULL, NULL, "wrs,sbc8560-brstcr");
- if (np == NULL) {
- printk(KERN_WARNING "sbc8560: No board specific RSTCR in DTB.\n");
- return -ENODEV;
- }
-
- of_address_to_resource(np, 0, &res);
-
- printk(KERN_INFO "sbc8560: Found BRSTCR at %pR\n", &res);
-
- brstcr = ioremap(res.start, resource_size(&res));
- if(!brstcr)
- printk(KERN_WARNING "sbc8560: ioremap of brstcr failed.\n");
-
- of_node_put(np);
-
- return 0;
-}
-
-arch_initcall(sbc8560_bdrstcr_init);
-
-void sbc8560_rstcr_restart(char * cmd)
-{
- local_irq_disable();
- if(brstcr)
- clrbits8(brstcr, 0x80);
-
- while(1);
-}
-
-define_machine(sbc8560) {
- .name = "SBC8560",
- .probe = sbc8560_probe,
- .setup_arch = sbc8560_setup_arch,
- .init_IRQ = sbc8560_pic_init,
- .show_cpuinfo = sbc8560_show_cpuinfo,
- .get_irq = mpic_get_irq,
- .restart = sbc8560_rstcr_restart,
- .calibrate_decr = generic_calibrate_decr,
- .progress = udbg_progress,
-};
projects / GitHub / moto-9609 / android_kernel_motorola_exynos9610.git / commitdiff