net: dsa: mv88e6171: Use common port configuration

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/dsa/mv88e6171.c b/drivers/net/dsa/mv88e6171.c
index 2f6662c246fac7159875ac5c0d406aa2f578d954..6ce6a3ea1b8dafa6bca572bed8fc6ca57f679bdd 100644 (file)
--- a/drivers/net/dsa/mv88e6171.c
+++ b/drivers/net/dsa/mv88e6171.c
@@ -221,28 +221,6 @@ static int mv88e6171_setup_port(struct dsa_switch *ds, int p)
                val |= 0x000c;
        REG_WRITE(addr, 0x04, val);
 
-       /* Port Control 1: disable trunking.  Also, if this is the
-        * CPU port, enable learn messages to be sent to this port.
-        */
-       REG_WRITE(addr, 0x05, dsa_is_cpu_port(ds, p) ? 0x8000 : 0x0000);
-
-       /* Port based VLAN map: give each port its own address
-        * database, allow the CPU port to talk to each of the 'real'
-        * ports, and allow each of the 'real' ports to only talk to
-        * the upstream port.
-        */
-       val = (p & 0xf) << 12;
-       if (dsa_is_cpu_port(ds, p))
-               val |= ds->phys_port_mask;
-       else
-               val |= 1 << dsa_upstream_port(ds);
-       REG_WRITE(addr, 0x06, val);
-
-       /* Default VLAN ID and priority: don't set a default VLAN
-        * ID, and set the default packet priority to zero.
-        */
-       REG_WRITE(addr, 0x07, 0x0000);
-
        /* Port Control 2: don't force a good FCS, set the maximum
         * frame size to 10240 bytes, don't let the switch add or
         * strip 802.1q tags, don't discard tagged or untagged frames
@@ -287,7 +265,7 @@ static int mv88e6171_setup_port(struct dsa_switch *ds, int p)
         */
        REG_WRITE(addr, 0x19, 0x7654);
 
-       return 0;
+       return mv88e6xxx_setup_port_common(ds, p);
 }
 
 static int mv88e6171_setup(struct dsa_switch *ds)