* Some values are marked as Reserved at the datasheet
*/
static const struct i2c_reg_value mt9v011_init_default[] = {
- /* guessed meaning - as mt9m111 */
{ R0D_MT9V011_RESET, 0x0001 },
{ R0D_MT9V011_RESET, 0x0000 },
+
{ R01_MT9V011_ROWSTART, 0x0008 },
{ R02_MT9V011_COLSTART, 0x0014 },
{ R03_MT9V011_HEIGHT, 0x01e0 },
{ R04_MT9V011_WIDTH, 0x0280 },
- { R05_MT9V011_HBLANK, 0x0001 },
- { R05_MT9V011_HBLANK, 0x0001 },
+ { R05_MT9V011_HBLANK, 0x007b },
+ { R06_MT9V011_VBLANK, 0x001c },
+ { R09_MT9V011_SHUTTER_WIDTH, 0x0418 },
{ R0A_MT9V011_CLK_SPEED, 0x0000 },
- { R05_MT9V011_HBLANK, 0x000a },
+ { R0C_MT9V011_SHUTTER_DELAY, 0x0000 },
+ { R1E_MT9V011_DIGITAL_ZOOM, 0x0000 },
+ { R20_MT9V011_READ_MODE, 0x1100 },
+
+ /*
+ * Those registers are not docummented at the datasheet.
+ * However, the original driver initializes them
+ */
{ 0x30, 0x0005 },
{ 0x34, 0x0100 },
{ 0x3d, 0x068f },
{ 0x58, 0x0038 }, /* Datasheet default 0x0078 */
{ 0x59, 0x0723 }, /* Datasheet default 0x0703 */
{ 0x62, 0x041a }, /* Datasheet default 0x0418 */
- { R09_MT9V011_SHUTTER_WIDTH, 0x0418 },
- { R20_MT9V011_READ_MODE, 0x1100 },
+
+ { R07_MT9V011_OUT_CTRL, 0x000a }, /* chip enable */
};
static void set_balance(struct v4l2_subdev *sd)