ARM: 6703/1: SPEAr: update clk API support
authorviresh kumar <viresh.kumar@st.com>
Wed, 16 Feb 2011 06:40:39 +0000 (07:40 +0100)
committerRussell King <rmk+kernel@arm.linux.org.uk>
Wed, 9 Mar 2011 09:49:45 +0000 (09:49 +0000)
- Add support for divisor per parent clock
- Add ENABLED_ON_INIT feature in clk
- Add clk_set_rate(), round_rate_index & clk_round_rate()
- Simplify clk_recalc functions
- Add/update clock definitions

Reviewed-by: Stanley Miao <stanley.miao@windriver.com>
Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: shiraz hashim <shiraz.hashim@st.com>
Signed-off-by: Rajeev Kumar <rajeev-dlh.kumar@st.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
arch/arm/mach-spear3xx/clock.c
arch/arm/mach-spear3xx/include/mach/misc_regs.h
arch/arm/mach-spear6xx/clock.c
arch/arm/mach-spear6xx/include/mach/misc_regs.h
arch/arm/plat-spear/clock.c
arch/arm/plat-spear/include/plat/clock.h

index 7ea8749ddf2821175d4ba18c937948de9556c575..8ae4ad0326a929d15b15be1fbfd290310fd1bb8e 100644 (file)
@@ -60,12 +60,22 @@ static struct pll_clk_config pll1_config = {
        .masks = &pll1_masks,
 };
 
+/* pll rate configuration table, in ascending order of rates */
+struct pll_rate_tbl pll_rtbl[] = {
+       {.mode = 0, .m = 0x85, .n = 0x0C, .p = 0x1}, /* 266 MHz */
+       {.mode = 0, .m = 0xA6, .n = 0x0C, .p = 0x1}, /* 332 MHz */
+};
+
 /* PLL1 clock */
 static struct clk pll1_clk = {
+       .flags = ENABLED_ON_INIT,
        .pclk = &osc_24m_clk,
        .en_reg = PLL1_CTR,
        .en_reg_bit = PLL_ENABLE,
+       .calc_rate = &pll_calc_rate,
        .recalc = &pll_clk_recalc,
+       .set_rate = &pll_clk_set_rate,
+       .rate_config = {pll_rtbl, ARRAY_SIZE(pll_rtbl), 1},
        .private_data = &pll1_config,
 };
 
@@ -103,11 +113,22 @@ static struct bus_clk_config ahb_config = {
        .masks = &ahb_masks,
 };
 
+/* ahb rate configuration table, in ascending order of rates */
+struct bus_rate_tbl bus_rtbl[] = {
+       {.div = 3}, /* == parent divided by 4 */
+       {.div = 2}, /* == parent divided by 3 */
+       {.div = 1}, /* == parent divided by 2 */
+       {.div = 0}, /* == parent divided by 1 */
+};
+
 /* ahb clock */
 static struct clk ahb_clk = {
        .flags = ALWAYS_ENABLED,
        .pclk = &pll1_clk,
+       .calc_rate = &bus_calc_rate,
        .recalc = &bus_clk_recalc,
+       .set_rate = &bus_clk_set_rate,
+       .rate_config = {bus_rtbl, ARRAY_SIZE(bus_rtbl), 2},
        .private_data = &ahb_config,
 };
 
@@ -123,22 +144,40 @@ static struct aux_clk_masks aux_masks = {
        .yscale_sel_shift = AUX_YSCALE_SHIFT,
 };
 
-/* uart configurations */
-static struct aux_clk_config uart_config = {
+/* uart synth configurations */
+static struct aux_clk_config uart_synth_config = {
        .synth_reg = UART_CLK_SYNT,
        .masks = &aux_masks,
 };
 
+/* aux rate configuration table, in ascending order of rates */
+struct aux_rate_tbl aux_rtbl[] = {
+       /* For PLL1 = 332 MHz */
+       {.xscale = 1, .yscale = 8, .eq = 1}, /* 41.5 MHz */
+       {.xscale = 1, .yscale = 4, .eq = 1}, /* 83 MHz */
+       {.xscale = 1, .yscale = 2, .eq = 1}, /* 166 MHz */
+};
+
+/* uart synth clock */
+static struct clk uart_synth_clk = {
+       .en_reg = UART_CLK_SYNT,
+       .en_reg_bit = AUX_SYNT_ENB,
+       .pclk = &pll1_clk,
+       .calc_rate = &aux_calc_rate,
+       .recalc = &aux_clk_recalc,
+       .set_rate = &aux_clk_set_rate,
+       .rate_config = {aux_rtbl, ARRAY_SIZE(aux_rtbl), 1},
+       .private_data = &uart_synth_config,
+};
+
 /* uart parents */
 static struct pclk_info uart_pclk_info[] = {
        {
-               .pclk = &pll1_clk,
-               .pclk_mask = AUX_CLK_PLL1_MASK,
-               .scalable = 1,
+               .pclk = &uart_synth_clk,
+               .pclk_val = AUX_CLK_PLL1_VAL,
        }, {
                .pclk = &pll3_48m_clk,
-               .pclk_mask = AUX_CLK_PLL3_MASK,
-               .scalable = 0,
+               .pclk_val = AUX_CLK_PLL3_VAL,
        },
 };
 
@@ -156,26 +195,35 @@ static struct clk uart_clk = {
        .en_reg_bit = UART_CLK_ENB,
        .pclk_sel = &uart_pclk_sel,
        .pclk_sel_shift = UART_CLK_SHIFT,
-       .recalc = &aux_clk_recalc,
-       .private_data = &uart_config,
+       .recalc = &follow_parent,
 };
 
 /* firda configurations */
-static struct aux_clk_config firda_config = {
+static struct aux_clk_config firda_synth_config = {
        .synth_reg = FIRDA_CLK_SYNT,
        .masks = &aux_masks,
 };
 
+/* firda synth clock */
+static struct clk firda_synth_clk = {
+       .en_reg = FIRDA_CLK_SYNT,
+       .en_reg_bit = AUX_SYNT_ENB,
+       .pclk = &pll1_clk,
+       .calc_rate = &aux_calc_rate,
+       .recalc = &aux_clk_recalc,
+       .set_rate = &aux_clk_set_rate,
+       .rate_config = {aux_rtbl, ARRAY_SIZE(aux_rtbl), 1},
+       .private_data = &firda_synth_config,
+};
+
 /* firda parents */
 static struct pclk_info firda_pclk_info[] = {
        {
-               .pclk = &pll1_clk,
-               .pclk_mask = AUX_CLK_PLL1_MASK,
-               .scalable = 1,
+               .pclk = &firda_synth_clk,
+               .pclk_val = AUX_CLK_PLL1_VAL,
        }, {
                .pclk = &pll3_48m_clk,
-               .pclk_mask = AUX_CLK_PLL3_MASK,
-               .scalable = 0,
+               .pclk_val = AUX_CLK_PLL3_VAL,
        },
 };
 
@@ -193,84 +241,155 @@ static struct clk firda_clk = {
        .en_reg_bit = FIRDA_CLK_ENB,
        .pclk_sel = &firda_pclk_sel,
        .pclk_sel_shift = FIRDA_CLK_SHIFT,
-       .recalc = &aux_clk_recalc,
-       .private_data = &firda_config,
+       .recalc = &follow_parent,
+};
+
+/* gpt synthesizer masks */
+static struct gpt_clk_masks gpt_masks = {
+       .mscale_sel_mask = GPT_MSCALE_MASK,
+       .mscale_sel_shift = GPT_MSCALE_SHIFT,
+       .nscale_sel_mask = GPT_NSCALE_MASK,
+       .nscale_sel_shift = GPT_NSCALE_SHIFT,
+};
+
+/* gpt rate configuration table, in ascending order of rates */
+struct gpt_rate_tbl gpt_rtbl[] = {
+       /* For pll1 = 332 MHz */
+       {.mscale = 4, .nscale = 0}, /* 41.5 MHz */
+       {.mscale = 2, .nscale = 0}, /* 55.3 MHz */
+       {.mscale = 1, .nscale = 0}, /* 83 MHz */
+};
+
+/* gpt0 synth clk config*/
+static struct gpt_clk_config gpt0_synth_config = {
+       .synth_reg = PRSC1_CLK_CFG,
+       .masks = &gpt_masks,
+};
+
+/* gpt synth clock */
+static struct clk gpt0_synth_clk = {
+       .flags = ALWAYS_ENABLED,
+       .pclk = &pll1_clk,
+       .calc_rate = &gpt_calc_rate,
+       .recalc = &gpt_clk_recalc,
+       .set_rate = &gpt_clk_set_rate,
+       .rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2},
+       .private_data = &gpt0_synth_config,
 };
 
 /* gpt parents */
-static struct pclk_info gpt_pclk_info[] = {
+static struct pclk_info gpt0_pclk_info[] = {
        {
-               .pclk = &pll1_clk,
-               .pclk_mask = AUX_CLK_PLL1_MASK,
-               .scalable = 1,
+               .pclk = &gpt0_synth_clk,
+               .pclk_val = AUX_CLK_PLL1_VAL,
        }, {
                .pclk = &pll3_48m_clk,
-               .pclk_mask = AUX_CLK_PLL3_MASK,
-               .scalable = 0,
+               .pclk_val = AUX_CLK_PLL3_VAL,
        },
 };
 
 /* gpt parent select structure */
-static struct pclk_sel gpt_pclk_sel = {
-       .pclk_info = gpt_pclk_info,
-       .pclk_count = ARRAY_SIZE(gpt_pclk_info),
+static struct pclk_sel gpt0_pclk_sel = {
+       .pclk_info = gpt0_pclk_info,
+       .pclk_count = ARRAY_SIZE(gpt0_pclk_info),
        .pclk_sel_reg = PERIP_CLK_CFG,
        .pclk_sel_mask = GPT_CLK_MASK,
 };
 
-/* gpt synthesizer masks */
-static struct gpt_clk_masks gpt_masks = {
-       .mscale_sel_mask = GPT_MSCALE_MASK,
-       .mscale_sel_shift = GPT_MSCALE_SHIFT,
-       .nscale_sel_mask = GPT_NSCALE_MASK,
-       .nscale_sel_shift = GPT_NSCALE_SHIFT,
+/* gpt0 timer clock */
+static struct clk gpt0_clk = {
+       .flags = ALWAYS_ENABLED,
+       .pclk_sel = &gpt0_pclk_sel,
+       .pclk_sel_shift = GPT0_CLK_SHIFT,
+       .recalc = &follow_parent,
 };
 
-/* gpt0 configurations */
-static struct gpt_clk_config gpt0_config = {
-       .synth_reg = PRSC1_CLK_CFG,
+/* gpt1 synth clk configurations */
+static struct gpt_clk_config gpt1_synth_config = {
+       .synth_reg = PRSC2_CLK_CFG,
        .masks = &gpt_masks,
 };
 
-/* gpt0 timer clock */
-static struct clk gpt0_clk = {
+/* gpt1 synth clock */
+static struct clk gpt1_synth_clk = {
        .flags = ALWAYS_ENABLED,
-       .pclk_sel = &gpt_pclk_sel,
-       .pclk_sel_shift = GPT0_CLK_SHIFT,
+       .pclk = &pll1_clk,
+       .calc_rate = &gpt_calc_rate,
        .recalc = &gpt_clk_recalc,
-       .private_data = &gpt0_config,
+       .set_rate = &gpt_clk_set_rate,
+       .rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2},
+       .private_data = &gpt1_synth_config,
 };
 
-/* gpt1 configurations */
-static struct gpt_clk_config gpt1_config = {
-       .synth_reg = PRSC2_CLK_CFG,
-       .masks = &gpt_masks,
+static struct pclk_info gpt1_pclk_info[] = {
+       {
+               .pclk = &gpt1_synth_clk,
+               .pclk_val = AUX_CLK_PLL1_VAL,
+       }, {
+               .pclk = &pll3_48m_clk,
+               .pclk_val = AUX_CLK_PLL3_VAL,
+       },
+};
+
+/* gpt parent select structure */
+static struct pclk_sel gpt1_pclk_sel = {
+       .pclk_info = gpt1_pclk_info,
+       .pclk_count = ARRAY_SIZE(gpt1_pclk_info),
+       .pclk_sel_reg = PERIP_CLK_CFG,
+       .pclk_sel_mask = GPT_CLK_MASK,
 };
 
 /* gpt1 timer clock */
 static struct clk gpt1_clk = {
        .en_reg = PERIP1_CLK_ENB,
        .en_reg_bit = GPT1_CLK_ENB,
-       .pclk_sel = &gpt_pclk_sel,
+       .pclk_sel = &gpt1_pclk_sel,
        .pclk_sel_shift = GPT1_CLK_SHIFT,
-       .recalc = &gpt_clk_recalc,
-       .private_data = &gpt1_config,
+       .recalc = &follow_parent,
 };
 
-/* gpt2 configurations */
-static struct gpt_clk_config gpt2_config = {
+/* gpt2 synth clk configurations */
+static struct gpt_clk_config gpt2_synth_config = {
        .synth_reg = PRSC3_CLK_CFG,
        .masks = &gpt_masks,
 };
 
+/* gpt1 synth clock */
+static struct clk gpt2_synth_clk = {
+       .flags = ALWAYS_ENABLED,
+       .pclk = &pll1_clk,
+       .calc_rate = &gpt_calc_rate,
+       .recalc = &gpt_clk_recalc,
+       .set_rate = &gpt_clk_set_rate,
+       .rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2},
+       .private_data = &gpt2_synth_config,
+};
+
+static struct pclk_info gpt2_pclk_info[] = {
+       {
+               .pclk = &gpt2_synth_clk,
+               .pclk_val = AUX_CLK_PLL1_VAL,
+       }, {
+               .pclk = &pll3_48m_clk,
+               .pclk_val = AUX_CLK_PLL3_VAL,
+       },
+};
+
+/* gpt parent select structure */
+static struct pclk_sel gpt2_pclk_sel = {
+       .pclk_info = gpt2_pclk_info,
+       .pclk_count = ARRAY_SIZE(gpt2_pclk_info),
+       .pclk_sel_reg = PERIP_CLK_CFG,
+       .pclk_sel_mask = GPT_CLK_MASK,
+};
+
 /* gpt2 timer clock */
 static struct clk gpt2_clk = {
        .en_reg = PERIP1_CLK_ENB,
        .en_reg_bit = GPT2_CLK_ENB,
-       .pclk_sel = &gpt_pclk_sel,
+       .pclk_sel = &gpt2_pclk_sel,
        .pclk_sel_shift = GPT2_CLK_SHIFT,
-       .recalc = &gpt_clk_recalc,
-       .private_data = &gpt2_config,
+       .recalc = &follow_parent,
 };
 
 /* clock derived from pll3 clk */
@@ -290,13 +409,6 @@ static struct clk usbd_clk = {
        .recalc = &follow_parent,
 };
 
-/* clcd clock */
-static struct clk clcd_clk = {
-       .flags = ALWAYS_ENABLED,
-       .pclk = &pll3_48m_clk,
-       .recalc = &follow_parent,
-};
-
 /* clock derived from ahb clk */
 /* apb masks structure */
 static struct bus_clk_masks apb_masks = {
@@ -314,7 +426,10 @@ static struct bus_clk_config apb_config = {
 static struct clk apb_clk = {
        .flags = ALWAYS_ENABLED,
        .pclk = &ahb_clk,
+       .calc_rate = &bus_calc_rate,
        .recalc = &bus_clk_recalc,
+       .set_rate = &bus_clk_set_rate,
+       .rate_config = {bus_rtbl, ARRAY_SIZE(bus_rtbl), 2},
        .private_data = &apb_config,
 };
 
@@ -375,8 +490,17 @@ static struct clk adc_clk = {
        .recalc = &follow_parent,
 };
 
+#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320)
+/* emi clock */
+static struct clk emi_clk = {
+       .flags = ALWAYS_ENABLED,
+       .pclk = &ahb_clk,
+       .recalc = &follow_parent,
+};
+#endif
+
 /* ssp clock */
-static struct clk ssp_clk = {
+static struct clk ssp0_clk = {
        .pclk = &apb_clk,
        .en_reg = PERIP1_CLK_ENB,
        .en_reg_bit = SSP_CLK_ENB,
@@ -393,6 +517,137 @@ static struct clk gpio_clk = {
 
 static struct clk dummy_apb_pclk;
 
+#if defined(CONFIG_MACH_SPEAR300) || defined(CONFIG_MACH_SPEAR310) || \
+       defined(CONFIG_MACH_SPEAR320)
+/* fsmc clock */
+static struct clk fsmc_clk = {
+       .flags = ALWAYS_ENABLED,
+       .pclk = &ahb_clk,
+       .recalc = &follow_parent,
+};
+#endif
+
+/* common clocks to spear310 and spear320 */
+#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320)
+/* uart1 clock */
+static struct clk uart1_clk = {
+       .flags = ALWAYS_ENABLED,
+       .pclk = &apb_clk,
+       .recalc = &follow_parent,
+};
+
+/* uart2 clock */
+static struct clk uart2_clk = {
+       .flags = ALWAYS_ENABLED,
+       .pclk = &apb_clk,
+       .recalc = &follow_parent,
+};
+#endif /* CONFIG_MACH_SPEAR310 || CONFIG_MACH_SPEAR320 */
+
+/* common clocks to spear300 and spear320 */
+#if defined(CONFIG_MACH_SPEAR300) || defined(CONFIG_MACH_SPEAR320)
+/* clcd clock */
+static struct clk clcd_clk = {
+       .flags = ALWAYS_ENABLED,
+       .pclk = &pll3_48m_clk,
+       .recalc = &follow_parent,
+};
+
+/* sdhci clock */
+static struct clk sdhci_clk = {
+       .flags = ALWAYS_ENABLED,
+       .pclk = &ahb_clk,
+       .recalc = &follow_parent,
+};
+#endif /* CONFIG_MACH_SPEAR300 || CONFIG_MACH_SPEAR320 */
+
+/* spear300 machine specific clock structures */
+#ifdef CONFIG_MACH_SPEAR300
+/* gpio1 clock */
+static struct clk gpio1_clk = {
+       .flags = ALWAYS_ENABLED,
+       .pclk = &apb_clk,
+       .recalc = &follow_parent,
+};
+
+/* keyboard clock */
+static struct clk kbd_clk = {
+       .flags = ALWAYS_ENABLED,
+       .pclk = &apb_clk,
+       .recalc = &follow_parent,
+};
+
+#endif
+
+/* spear310 machine specific clock structures */
+#ifdef CONFIG_MACH_SPEAR310
+/* uart3 clock */
+static struct clk uart3_clk = {
+       .flags = ALWAYS_ENABLED,
+       .pclk = &apb_clk,
+       .recalc = &follow_parent,
+};
+
+/* uart4 clock */
+static struct clk uart4_clk = {
+       .flags = ALWAYS_ENABLED,
+       .pclk = &apb_clk,
+       .recalc = &follow_parent,
+};
+
+/* uart5 clock */
+static struct clk uart5_clk = {
+       .flags = ALWAYS_ENABLED,
+       .pclk = &apb_clk,
+       .recalc = &follow_parent,
+};
+#endif
+
+/* spear320 machine specific clock structures */
+#ifdef CONFIG_MACH_SPEAR320
+/* can0 clock */
+static struct clk can0_clk = {
+       .flags = ALWAYS_ENABLED,
+       .pclk = &apb_clk,
+       .recalc = &follow_parent,
+};
+
+/* can1 clock */
+static struct clk can1_clk = {
+       .flags = ALWAYS_ENABLED,
+       .pclk = &apb_clk,
+       .recalc = &follow_parent,
+};
+
+/* i2c1 clock */
+static struct clk i2c1_clk = {
+       .flags = ALWAYS_ENABLED,
+       .pclk = &ahb_clk,
+       .recalc = &follow_parent,
+};
+
+/* ssp1 clock */
+static struct clk ssp1_clk = {
+       .flags = ALWAYS_ENABLED,
+       .pclk = &apb_clk,
+       .recalc = &follow_parent,
+};
+
+/* ssp2 clock */
+static struct clk ssp2_clk = {
+       .flags = ALWAYS_ENABLED,
+       .pclk = &apb_clk,
+       .recalc = &follow_parent,
+};
+
+/* pwm clock */
+static struct clk pwm_clk = {
+       .flags = ALWAYS_ENABLED,
+       .pclk = &apb_clk,
+       .recalc = &follow_parent,
+};
+#endif
+
 /* array of all spear 3xx clock lookups */
 static struct clk_lookup spear_clk_lookups[] = {
        { .con_id = "apb_pclk", .clk = &dummy_apb_pclk},
@@ -400,7 +655,7 @@ static struct clk_lookup spear_clk_lookups[] = {
        { .con_id = "osc_32k_clk",      .clk = &osc_32k_clk},
        { .con_id = "osc_24m_clk",      .clk = &osc_24m_clk},
        /* clock derived from 32 KHz osc clk */
-       { .dev_id = "rtc",              .clk = &rtc_clk},
+       { .dev_id = "rtc-spear",        .clk = &rtc_clk},
        /* clock derived from 24 MHz osc clk */
        { .con_id = "pll1_clk",         .clk = &pll1_clk},
        { .con_id = "pll3_48m_clk",     .clk = &pll3_48m_clk},
@@ -408,18 +663,22 @@ static struct clk_lookup spear_clk_lookups[] = {
        /* clock derived from pll1 clk */
        { .con_id = "cpu_clk",          .clk = &cpu_clk},
        { .con_id = "ahb_clk",          .clk = &ahb_clk},
+       { .con_id = "uart_synth_clk",   .clk = &uart_synth_clk},
+       { .con_id = "firda_synth_clk",  .clk = &firda_synth_clk},
+       { .con_id = "gpt0_synth_clk",   .clk = &gpt0_synth_clk},
+       { .con_id = "gpt1_synth_clk",   .clk = &gpt1_synth_clk},
+       { .con_id = "gpt2_synth_clk",   .clk = &gpt2_synth_clk},
        { .dev_id = "uart",             .clk = &uart_clk},
        { .dev_id = "firda",            .clk = &firda_clk},
        { .dev_id = "gpt0",             .clk = &gpt0_clk},
        { .dev_id = "gpt1",             .clk = &gpt1_clk},
        { .dev_id = "gpt2",             .clk = &gpt2_clk},
        /* clock derived from pll3 clk */
-       { .dev_id = "usbh",             .clk = &usbh_clk},
+       { .con_id = "usbh_clk",         .clk = &usbh_clk},
        { .dev_id = "usbd",             .clk = &usbd_clk},
-       { .dev_id = "clcd",             .clk = &clcd_clk},
        /* clock derived from ahb clk */
        { .con_id = "apb_clk",          .clk = &apb_clk},
-       { .dev_id = "i2c",              .clk = &i2c_clk},
+       { .dev_id = "i2c_designware.0", .clk = &i2c_clk},
        { .dev_id = "dma",              .clk = &dma_clk},
        { .dev_id = "jpeg",             .clk = &jpeg_clk},
        { .dev_id = "gmac",             .clk = &gmac_clk},
@@ -427,8 +686,50 @@ static struct clk_lookup spear_clk_lookups[] = {
        { .dev_id = "c3",               .clk = &c3_clk},
        /* clock derived from apb clk */
        { .dev_id = "adc",              .clk = &adc_clk},
-       { .dev_id = "ssp",              .clk = &ssp_clk},
+       { .dev_id = "ssp-pl022.0",      .clk = &ssp0_clk},
        { .dev_id = "gpio",             .clk = &gpio_clk},
+#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320)
+       { .dev_id = "physmap-flash",    .clk = &emi_clk},
+#endif
+#if defined(CONFIG_MACH_SPEAR300) || defined(CONFIG_MACH_SPEAR310) || \
+       defined(CONFIG_MACH_SPEAR320)
+       { .con_id = "fsmc",             .clk = &fsmc_clk},
+#endif
+
+/* common clocks to spear310 and spear320 */
+#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320)
+       { .dev_id = "uart1",            .clk = &uart1_clk},
+       { .dev_id = "uart2",            .clk = &uart2_clk},
+#endif
+
+       /* common clock to spear300 and spear320 */
+#if defined(CONFIG_MACH_SPEAR300) || defined(CONFIG_MACH_SPEAR320)
+       { .dev_id = "clcd",             .clk = &clcd_clk},
+       { .dev_id = "sdhci",            .clk = &sdhci_clk},
+#endif /* CONFIG_MACH_SPEAR300 || CONFIG_MACH_SPEAR320 */
+
+       /* spear300 machine specific clock structures */
+#ifdef CONFIG_MACH_SPEAR300
+       { .dev_id = "gpio1",            .clk = &gpio1_clk},
+       { .dev_id = "keyboard",         .clk = &kbd_clk},
+#endif
+
+       /* spear310 machine specific clock structures */
+#ifdef CONFIG_MACH_SPEAR310
+       { .dev_id = "uart3",            .clk = &uart3_clk},
+       { .dev_id = "uart4",            .clk = &uart4_clk},
+       { .dev_id = "uart5",            .clk = &uart5_clk},
+
+#endif
+       /* spear320 machine specific clock structures */
+#ifdef CONFIG_MACH_SPEAR320
+       { .dev_id = "c_can_platform.0", .clk = &can0_clk},
+       { .dev_id = "c_can_platform.1", .clk = &can1_clk},
+       { .dev_id = "i2c_designware.1", .clk = &i2c1_clk},
+       { .dev_id = "ssp-pl022.1",      .clk = &ssp1_clk},
+       { .dev_id = "ssp-pl022.2",      .clk = &ssp2_clk},
+       { .dev_id = "pwm",              .clk = &pwm_clk},
+#endif
 };
 
 void __init clk_init(void)
index 6c919e1f9c43716282c3a3b2be56638e6f5c2a2c..0b93347c0f116a3bb2a312f018db2f1b773f1d84 100644 (file)
@@ -63,8 +63,8 @@
 #define GPT1_CLK_SHIFT         11
 #define GPT2_CLK_SHIFT         12
 #define GPT_CLK_MASK           0x1
-#define AUX_CLK_PLL3_MASK      0
-#define AUX_CLK_PLL1_MASK      1
+#define AUX_CLK_PLL3_VAL       0
+#define AUX_CLK_PLL1_VAL       1
 
 #define PERIP1_CLK_ENB         (MISC_BASE + 0x02C)
 /* PERIP1_CLK_ENB register masks */
 #define RAS3_CLK_SYNT          (MISC_BASE + 0x074)
 #define RAS4_CLK_SYNT          (MISC_BASE + 0x078)
 /* aux clk synthesiser register masks for irda to ras4 */
+#define AUX_SYNT_ENB           31
 #define AUX_EQ_SEL_SHIFT       30
 #define AUX_EQ_SEL_MASK                1
 #define AUX_EQ1_SEL            0
index ef88922986e06e2cd44d3e83ed498197ad10d934..91719524766bfcb5d17a9502e9eb97b540ddbb34 100644 (file)
@@ -60,12 +60,22 @@ static struct pll_clk_config pll1_config = {
        .masks = &pll1_masks,
 };
 
+/* pll rate configuration table, in ascending order of rates */
+struct pll_rate_tbl pll_rtbl[] = {
+       {.mode = 0, .m = 0x85, .n = 0x0C, .p = 0x1}, /* 266 MHz */
+       {.mode = 0, .m = 0xA6, .n = 0x0C, .p = 0x1}, /* 332 MHz */
+};
+
 /* PLL1 clock */
 static struct clk pll1_clk = {
+       .flags = ENABLED_ON_INIT,
        .pclk = &osc_30m_clk,
        .en_reg = PLL1_CTR,
        .en_reg_bit = PLL_ENABLE,
+       .calc_rate = &pll_calc_rate,
        .recalc = &pll_clk_recalc,
+       .set_rate = &pll_clk_set_rate,
+       .rate_config = {pll_rtbl, ARRAY_SIZE(pll_rtbl), 1},
        .private_data = &pll1_config,
 };
 
@@ -103,35 +113,25 @@ static struct bus_clk_config ahb_config = {
        .masks = &ahb_masks,
 };
 
+/* ahb rate configuration table, in ascending order of rates */
+struct bus_rate_tbl bus_rtbl[] = {
+       {.div = 3}, /* == parent divided by 4 */
+       {.div = 2}, /* == parent divided by 3 */
+       {.div = 1}, /* == parent divided by 2 */
+       {.div = 0}, /* == parent divided by 1 */
+};
+
 /* ahb clock */
 static struct clk ahb_clk = {
        .flags = ALWAYS_ENABLED,
        .pclk = &pll1_clk,
+       .calc_rate = &bus_calc_rate,
        .recalc = &bus_clk_recalc,
+       .set_rate = &bus_clk_set_rate,
+       .rate_config = {bus_rtbl, ARRAY_SIZE(bus_rtbl), 2},
        .private_data = &ahb_config,
 };
 
-/* uart parents */
-static struct pclk_info uart_pclk_info[] = {
-       {
-               .pclk = &pll1_clk,
-               .pclk_mask = AUX_CLK_PLL1_MASK,
-               .scalable = 1,
-       }, {
-               .pclk = &pll3_48m_clk,
-               .pclk_mask = AUX_CLK_PLL3_MASK,
-               .scalable = 0,
-       },
-};
-
-/* uart parent select structure */
-static struct pclk_sel uart_pclk_sel = {
-       .pclk_info = uart_pclk_info,
-       .pclk_count = ARRAY_SIZE(uart_pclk_info),
-       .pclk_sel_reg = PERIP_CLK_CFG,
-       .pclk_sel_mask = UART_CLK_MASK,
-};
-
 /* auxiliary synthesizers masks */
 static struct aux_clk_masks aux_masks = {
        .eq_sel_mask = AUX_EQ_SEL_MASK,
@@ -145,19 +145,57 @@ static struct aux_clk_masks aux_masks = {
 };
 
 /* uart configurations */
-static struct aux_clk_config uart_config = {
+static struct aux_clk_config uart_synth_config = {
        .synth_reg = UART_CLK_SYNT,
        .masks = &aux_masks,
 };
 
+/* aux rate configuration table, in ascending order of rates */
+struct aux_rate_tbl aux_rtbl[] = {
+       /* For PLL1 = 332 MHz */
+       {.xscale = 1, .yscale = 8, .eq = 1}, /* 41.5 MHz */
+       {.xscale = 1, .yscale = 4, .eq = 1}, /* 83 MHz */
+       {.xscale = 1, .yscale = 2, .eq = 1}, /* 166 MHz */
+};
+
+/* uart synth clock */
+static struct clk uart_synth_clk = {
+       .en_reg = UART_CLK_SYNT,
+       .en_reg_bit = AUX_SYNT_ENB,
+       .pclk = &pll1_clk,
+       .calc_rate = &aux_calc_rate,
+       .recalc = &aux_clk_recalc,
+       .set_rate = &aux_clk_set_rate,
+       .rate_config = {aux_rtbl, ARRAY_SIZE(aux_rtbl), 2},
+       .private_data = &uart_synth_config,
+};
+
+/* uart parents */
+static struct pclk_info uart_pclk_info[] = {
+       {
+               .pclk = &uart_synth_clk,
+               .pclk_val = AUX_CLK_PLL1_VAL,
+       }, {
+               .pclk = &pll3_48m_clk,
+               .pclk_val = AUX_CLK_PLL3_VAL,
+       },
+};
+
+/* uart parent select structure */
+static struct pclk_sel uart_pclk_sel = {
+       .pclk_info = uart_pclk_info,
+       .pclk_count = ARRAY_SIZE(uart_pclk_info),
+       .pclk_sel_reg = PERIP_CLK_CFG,
+       .pclk_sel_mask = UART_CLK_MASK,
+};
+
 /* uart0 clock */
 static struct clk uart0_clk = {
        .en_reg = PERIP1_CLK_ENB,
        .en_reg_bit = UART0_CLK_ENB,
        .pclk_sel = &uart_pclk_sel,
        .pclk_sel_shift = UART_CLK_SHIFT,
-       .recalc = &aux_clk_recalc,
-       .private_data = &uart_config,
+       .recalc = &follow_parent,
 };
 
 /* uart1 clock */
@@ -166,26 +204,35 @@ static struct clk uart1_clk = {
        .en_reg_bit = UART1_CLK_ENB,
        .pclk_sel = &uart_pclk_sel,
        .pclk_sel_shift = UART_CLK_SHIFT,
-       .recalc = &aux_clk_recalc,
-       .private_data = &uart_config,
+       .recalc = &follow_parent,
 };
 
 /* firda configurations */
-static struct aux_clk_config firda_config = {
+static struct aux_clk_config firda_synth_config = {
        .synth_reg = FIRDA_CLK_SYNT,
        .masks = &aux_masks,
 };
 
+/* firda synth clock */
+static struct clk firda_synth_clk = {
+       .en_reg = FIRDA_CLK_SYNT,
+       .en_reg_bit = AUX_SYNT_ENB,
+       .pclk = &pll1_clk,
+       .calc_rate = &aux_calc_rate,
+       .recalc = &aux_clk_recalc,
+       .set_rate = &aux_clk_set_rate,
+       .rate_config = {aux_rtbl, ARRAY_SIZE(aux_rtbl), 2},
+       .private_data = &firda_synth_config,
+};
+
 /* firda parents */
 static struct pclk_info firda_pclk_info[] = {
        {
-               .pclk = &pll1_clk,
-               .pclk_mask = AUX_CLK_PLL1_MASK,
-               .scalable = 1,
+               .pclk = &firda_synth_clk,
+               .pclk_val = AUX_CLK_PLL1_VAL,
        }, {
                .pclk = &pll3_48m_clk,
-               .pclk_mask = AUX_CLK_PLL3_MASK,
-               .scalable = 0,
+               .pclk_val = AUX_CLK_PLL3_VAL,
        },
 };
 
@@ -203,26 +250,35 @@ static struct clk firda_clk = {
        .en_reg_bit = FIRDA_CLK_ENB,
        .pclk_sel = &firda_pclk_sel,
        .pclk_sel_shift = FIRDA_CLK_SHIFT,
-       .recalc = &aux_clk_recalc,
-       .private_data = &firda_config,
+       .recalc = &follow_parent,
 };
 
 /* clcd configurations */
-static struct aux_clk_config clcd_config = {
+static struct aux_clk_config clcd_synth_config = {
        .synth_reg = CLCD_CLK_SYNT,
        .masks = &aux_masks,
 };
 
+/* firda synth clock */
+static struct clk clcd_synth_clk = {
+       .en_reg = CLCD_CLK_SYNT,
+       .en_reg_bit = AUX_SYNT_ENB,
+       .pclk = &pll1_clk,
+       .calc_rate = &aux_calc_rate,
+       .recalc = &aux_clk_recalc,
+       .set_rate = &aux_clk_set_rate,
+       .rate_config = {aux_rtbl, ARRAY_SIZE(aux_rtbl), 2},
+       .private_data = &clcd_synth_config,
+};
+
 /* clcd parents */
 static struct pclk_info clcd_pclk_info[] = {
        {
-               .pclk = &pll1_clk,
-               .pclk_mask = AUX_CLK_PLL1_MASK,
-               .scalable = 1,
+               .pclk = &clcd_synth_clk,
+               .pclk_val = AUX_CLK_PLL1_VAL,
        }, {
                .pclk = &pll3_48m_clk,
-               .pclk_mask = AUX_CLK_PLL3_MASK,
-               .scalable = 0,
+               .pclk_val = AUX_CLK_PLL3_VAL,
        },
 };
 
@@ -240,29 +296,7 @@ static struct clk clcd_clk = {
        .en_reg_bit = CLCD_CLK_ENB,
        .pclk_sel = &clcd_pclk_sel,
        .pclk_sel_shift = CLCD_CLK_SHIFT,
-       .recalc = &aux_clk_recalc,
-       .private_data = &clcd_config,
-};
-
-/* gpt parents */
-static struct pclk_info gpt_pclk_info[] = {
-       {
-               .pclk = &pll1_clk,
-               .pclk_mask = AUX_CLK_PLL1_MASK,
-               .scalable = 1,
-       }, {
-               .pclk = &pll3_48m_clk,
-               .pclk_mask = AUX_CLK_PLL3_MASK,
-               .scalable = 0,
-       },
-};
-
-/* gpt parent select structure */
-static struct pclk_sel gpt_pclk_sel = {
-       .pclk_info = gpt_pclk_info,
-       .pclk_count = ARRAY_SIZE(gpt_pclk_info),
-       .pclk_sel_reg = PERIP_CLK_CFG,
-       .pclk_sel_mask = GPT_CLK_MASK,
+       .recalc = &follow_parent,
 };
 
 /* gpt synthesizer masks */
@@ -273,60 +307,162 @@ static struct gpt_clk_masks gpt_masks = {
        .nscale_sel_shift = GPT_NSCALE_SHIFT,
 };
 
-/* gpt0_1 configurations */
-static struct gpt_clk_config gpt0_1_config = {
+/* gpt rate configuration table, in ascending order of rates */
+struct gpt_rate_tbl gpt_rtbl[] = {
+       /* For pll1 = 332 MHz */
+       {.mscale = 4, .nscale = 0}, /* 41.5 MHz */
+       {.mscale = 2, .nscale = 0}, /* 55.3 MHz */
+       {.mscale = 1, .nscale = 0}, /* 83 MHz */
+};
+
+/* gpt0 synth clk config*/
+static struct gpt_clk_config gpt0_synth_config = {
        .synth_reg = PRSC1_CLK_CFG,
        .masks = &gpt_masks,
 };
 
+/* gpt synth clock */
+static struct clk gpt0_synth_clk = {
+       .flags = ALWAYS_ENABLED,
+       .pclk = &pll1_clk,
+       .calc_rate = &gpt_calc_rate,
+       .recalc = &gpt_clk_recalc,
+       .set_rate = &gpt_clk_set_rate,
+       .rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2},
+       .private_data = &gpt0_synth_config,
+};
+
+/* gpt parents */
+static struct pclk_info gpt0_pclk_info[] = {
+       {
+               .pclk = &gpt0_synth_clk,
+               .pclk_val = AUX_CLK_PLL1_VAL,
+       }, {
+               .pclk = &pll3_48m_clk,
+               .pclk_val = AUX_CLK_PLL3_VAL,
+       },
+};
+
+/* gpt parent select structure */
+static struct pclk_sel gpt0_pclk_sel = {
+       .pclk_info = gpt0_pclk_info,
+       .pclk_count = ARRAY_SIZE(gpt0_pclk_info),
+       .pclk_sel_reg = PERIP_CLK_CFG,
+       .pclk_sel_mask = GPT_CLK_MASK,
+};
+
 /* gpt0 ARM1 subsystem timer clock */
 static struct clk gpt0_clk = {
        .flags = ALWAYS_ENABLED,
-       .pclk_sel = &gpt_pclk_sel,
+       .pclk_sel = &gpt0_pclk_sel,
        .pclk_sel_shift = GPT0_CLK_SHIFT,
-       .recalc = &gpt_clk_recalc,
-       .private_data = &gpt0_1_config,
+       .recalc = &follow_parent,
+};
+
+
+/* Note: gpt0 and gpt1 share same parent clocks */
+/* gpt parent select structure */
+static struct pclk_sel gpt1_pclk_sel = {
+       .pclk_info = gpt0_pclk_info,
+       .pclk_count = ARRAY_SIZE(gpt0_pclk_info),
+       .pclk_sel_reg = PERIP_CLK_CFG,
+       .pclk_sel_mask = GPT_CLK_MASK,
 };
 
 /* gpt1 timer clock */
 static struct clk gpt1_clk = {
        .flags = ALWAYS_ENABLED,
-       .pclk_sel = &gpt_pclk_sel,
+       .pclk_sel = &gpt1_pclk_sel,
        .pclk_sel_shift = GPT1_CLK_SHIFT,
-       .recalc = &gpt_clk_recalc,
-       .private_data = &gpt0_1_config,
+       .recalc = &follow_parent,
 };
 
-/* gpt2 configurations */
-static struct gpt_clk_config gpt2_config = {
+/* gpt2 synth clk config*/
+static struct gpt_clk_config gpt2_synth_config = {
        .synth_reg = PRSC2_CLK_CFG,
        .masks = &gpt_masks,
 };
 
+/* gpt synth clock */
+static struct clk gpt2_synth_clk = {
+       .flags = ALWAYS_ENABLED,
+       .pclk = &pll1_clk,
+       .calc_rate = &gpt_calc_rate,
+       .recalc = &gpt_clk_recalc,
+       .set_rate = &gpt_clk_set_rate,
+       .rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2},
+       .private_data = &gpt2_synth_config,
+};
+
+/* gpt parents */
+static struct pclk_info gpt2_pclk_info[] = {
+       {
+               .pclk = &gpt2_synth_clk,
+               .pclk_val = AUX_CLK_PLL1_VAL,
+       }, {
+               .pclk = &pll3_48m_clk,
+               .pclk_val = AUX_CLK_PLL3_VAL,
+       },
+};
+
+/* gpt parent select structure */
+static struct pclk_sel gpt2_pclk_sel = {
+       .pclk_info = gpt2_pclk_info,
+       .pclk_count = ARRAY_SIZE(gpt2_pclk_info),
+       .pclk_sel_reg = PERIP_CLK_CFG,
+       .pclk_sel_mask = GPT_CLK_MASK,
+};
+
 /* gpt2 timer clock */
 static struct clk gpt2_clk = {
-       .en_reg = PERIP1_CLK_ENB,
-       .en_reg_bit = GPT2_CLK_ENB,
-       .pclk_sel = &gpt_pclk_sel,
+       .flags = ALWAYS_ENABLED,
+       .pclk_sel = &gpt2_pclk_sel,
        .pclk_sel_shift = GPT2_CLK_SHIFT,
-       .recalc = &gpt_clk_recalc,
-       .private_data = &gpt2_config,
+       .recalc = &follow_parent,
 };
 
-/* gpt3 configurations */
-static struct gpt_clk_config gpt3_config = {
+/* gpt3 synth clk config*/
+static struct gpt_clk_config gpt3_synth_config = {
        .synth_reg = PRSC3_CLK_CFG,
        .masks = &gpt_masks,
 };
 
+/* gpt synth clock */
+static struct clk gpt3_synth_clk = {
+       .flags = ALWAYS_ENABLED,
+       .pclk = &pll1_clk,
+       .calc_rate = &gpt_calc_rate,
+       .recalc = &gpt_clk_recalc,
+       .set_rate = &gpt_clk_set_rate,
+       .rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2},
+       .private_data = &gpt3_synth_config,
+};
+
+/* gpt parents */
+static struct pclk_info gpt3_pclk_info[] = {
+       {
+               .pclk = &gpt3_synth_clk,
+               .pclk_val = AUX_CLK_PLL1_VAL,
+       }, {
+               .pclk = &pll3_48m_clk,
+               .pclk_val = AUX_CLK_PLL3_VAL,
+       },
+};
+
+/* gpt parent select structure */
+static struct pclk_sel gpt3_pclk_sel = {
+       .pclk_info = gpt3_pclk_info,
+       .pclk_count = ARRAY_SIZE(gpt3_pclk_info),
+       .pclk_sel_reg = PERIP_CLK_CFG,
+       .pclk_sel_mask = GPT_CLK_MASK,
+};
+
 /* gpt3 timer clock */
 static struct clk gpt3_clk = {
-       .en_reg = PERIP1_CLK_ENB,
-       .en_reg_bit = GPT3_CLK_ENB,
-       .pclk_sel = &gpt_pclk_sel,
+       .flags = ALWAYS_ENABLED,
+       .pclk_sel = &gpt3_pclk_sel,
        .pclk_sel_shift = GPT3_CLK_SHIFT,
-       .recalc = &gpt_clk_recalc,
-       .private_data = &gpt3_config,
+       .recalc = &follow_parent,
 };
 
 /* clock derived from pll3 clk */
@@ -371,7 +507,10 @@ static struct bus_clk_config apb_config = {
 static struct clk apb_clk = {
        .flags = ALWAYS_ENABLED,
        .pclk = &ahb_clk,
+       .calc_rate = &bus_calc_rate,
        .recalc = &bus_clk_recalc,
+       .set_rate = &bus_clk_set_rate,
+       .rate_config = {bus_rtbl, ARRAY_SIZE(bus_rtbl), 2},
        .private_data = &apb_config,
 };
 
@@ -488,7 +627,7 @@ static struct clk_lookup spear_clk_lookups[] = {
        { .con_id = "osc_32k_clk",      .clk = &osc_32k_clk},
        { .con_id = "osc_30m_clk",      .clk = &osc_30m_clk},
        /* clock derived from 32 KHz os          clk */
-       { .dev_id = "rtc",              .clk = &rtc_clk},
+       { .dev_id = "rtc-spear",        .clk = &rtc_clk},
        /* clock derived from 30 MHz os          clk */
        { .con_id = "pll1_clk",         .clk = &pll1_clk},
        { .con_id = "pll3_48m_clk",     .clk = &pll3_48m_clk},
@@ -496,6 +635,12 @@ static struct clk_lookup spear_clk_lookups[] = {
        /* clock derived from pll1 clk */
        { .con_id = "cpu_clk",          .clk = &cpu_clk},
        { .con_id = "ahb_clk",          .clk = &ahb_clk},
+       { .con_id = "uart_synth_clk",   .clk = &uart_synth_clk},
+       { .con_id = "firda_synth_clk",  .clk = &firda_synth_clk},
+       { .con_id = "clcd_synth_clk",   .clk = &clcd_synth_clk},
+       { .con_id = "gpt0_synth_clk",   .clk = &gpt0_synth_clk},
+       { .con_id = "gpt2_synth_clk",   .clk = &gpt2_synth_clk},
+       { .con_id = "gpt3_synth_clk",   .clk = &gpt3_synth_clk},
        { .dev_id = "uart0",            .clk = &uart0_clk},
        { .dev_id = "uart1",            .clk = &uart1_clk},
        { .dev_id = "firda",            .clk = &firda_clk},
@@ -505,22 +650,22 @@ static struct clk_lookup spear_clk_lookups[] = {
        { .dev_id = "gpt2",             .clk = &gpt2_clk},
        { .dev_id = "gpt3",             .clk = &gpt3_clk},
        /* clock derived from pll3 clk */
-       { .dev_id = "usbh0",            .clk = &usbh0_clk},
-       { .dev_id = "usbh1",            .clk = &usbh1_clk},
+       { .con_id = "usbh.0_clk",       .clk = &usbh0_clk},
+       { .con_id = "usbh.1_clk",       .clk = &usbh1_clk},
        { .dev_id = "usbd",             .clk = &usbd_clk},
        /* clock derived from ahb clk */
        { .con_id = "apb_clk",          .clk = &apb_clk},
-       { .dev_id = "i2c",              .clk = &i2c_clk},
+       { .dev_id = "i2c_designware.0", .clk = &i2c_clk},
        { .dev_id = "dma",              .clk = &dma_clk},
        { .dev_id = "jpeg",             .clk = &jpeg_clk},
        { .dev_id = "gmac",             .clk = &gmac_clk},
        { .dev_id = "smi",              .clk = &smi_clk},
-       { .dev_id = "fsmc",             .clk = &fsmc_clk},
+       { .con_id = "fsmc",             .clk = &fsmc_clk},
        /* clock derived from apb clk */
        { .dev_id = "adc",              .clk = &adc_clk},
-       { .dev_id = "ssp0",             .clk = &ssp0_clk},
-       { .dev_id = "ssp1",             .clk = &ssp1_clk},
-       { .dev_id = "ssp2",             .clk = &ssp2_clk},
+       { .dev_id = "ssp-pl022.0",      .clk = &ssp0_clk},
+       { .dev_id = "ssp-pl022.1",      .clk = &ssp1_clk},
+       { .dev_id = "ssp-pl022.2",      .clk = &ssp2_clk},
        { .dev_id = "gpio0",            .clk = &gpio0_clk},
        { .dev_id = "gpio1",            .clk = &gpio1_clk},
        { .dev_id = "gpio2",            .clk = &gpio2_clk},
index d15317788d0d647a3c26ab562b61f1691e307235..45571c13227a42db423aeb976a4d0e536f27c6b2 100644 (file)
@@ -66,8 +66,8 @@
 #define GPT2_CLK_SHIFT         11
 #define GPT3_CLK_SHIFT         12
 #define GPT_CLK_MASK           0x1
-#define AUX_CLK_PLL3_MASK      0
-#define AUX_CLK_PLL1_MASK      1
+#define AUX_CLK_PLL3_VAL       0
+#define AUX_CLK_PLL1_VAL       1
 
 #define PERIP1_CLK_ENB         (MISC_BASE + 0x02C)
 /* PERIP1_CLK_ENB register masks */
 #define RAS3_CLK_SYNT          (MISC_BASE + 0x074)
 #define RAS4_CLK_SYNT          (MISC_BASE + 0x078)
 /* aux clk synthesiser register masks for irda to ras4 */
+#define AUX_SYNT_ENB           31
 #define AUX_EQ_SEL_SHIFT       30
 #define AUX_EQ_SEL_MASK                1
 #define AUX_EQ1_SEL            0
index f1cf832e4e3b1c5cf4a4df4a976ba65cc0a44613..7e7ab606dc494a6ff5e00cfdc1dedf8f4efc2455 100644 (file)
@@ -12,6 +12,7 @@
  */
 
 #include <linux/bug.h>
+#include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/io.h>
 #include <linux/list.h>
@@ -22,7 +23,7 @@
 static DEFINE_SPINLOCK(clocks_lock);
 static LIST_HEAD(root_clks);
 
-static void propagate_rate(struct list_head *);
+static void propagate_rate(struct clk *, int on_init);
 
 static int generic_clk_enable(struct clk *clk)
 {
@@ -64,6 +65,100 @@ static struct clkops generic_clkops = {
        .disable = generic_clk_disable,
 };
 
+/* returns current programmed clocks clock info structure */
+static struct pclk_info *pclk_info_get(struct clk *clk)
+{
+       unsigned int val, i;
+       struct pclk_info *info = NULL;
+
+       val = (readl(clk->pclk_sel->pclk_sel_reg) >> clk->pclk_sel_shift)
+               & clk->pclk_sel->pclk_sel_mask;
+
+       for (i = 0; i < clk->pclk_sel->pclk_count; i++) {
+               if (clk->pclk_sel->pclk_info[i].pclk_val == val)
+                       info = &clk->pclk_sel->pclk_info[i];
+       }
+
+       return info;
+}
+
+/*
+ * Set Update pclk, and pclk_info of clk and add clock sibling node to current
+ * parents children list
+ */
+static void clk_reparent(struct clk *clk, struct pclk_info *pclk_info)
+{
+       unsigned long flags;
+
+       spin_lock_irqsave(&clocks_lock, flags);
+       list_del(&clk->sibling);
+       list_add(&clk->sibling, &pclk_info->pclk->children);
+
+       clk->pclk = pclk_info->pclk;
+       spin_unlock_irqrestore(&clocks_lock, flags);
+}
+
+static void do_clk_disable(struct clk *clk)
+{
+       if (!clk)
+               return;
+
+       if (!clk->usage_count) {
+               WARN_ON(1);
+               return;
+       }
+
+       clk->usage_count--;
+
+       if (clk->usage_count == 0) {
+               /*
+                * Surely, there are no active childrens or direct users
+                * of this clock
+                */
+               if (clk->pclk)
+                       do_clk_disable(clk->pclk);
+
+               if (clk->ops && clk->ops->disable)
+                       clk->ops->disable(clk);
+       }
+}
+
+static int do_clk_enable(struct clk *clk)
+{
+       int ret = 0;
+
+       if (!clk)
+               return -EFAULT;
+
+       if (clk->usage_count == 0) {
+               if (clk->pclk) {
+                       ret = do_clk_enable(clk->pclk);
+                       if (ret)
+                               goto err;
+               }
+               if (clk->ops && clk->ops->enable) {
+                       ret = clk->ops->enable(clk);
+                       if (ret) {
+                               if (clk->pclk)
+                                       do_clk_disable(clk->pclk);
+                               goto err;
+                       }
+               }
+               /*
+                * Since the clock is going to be used for the first
+                * time please reclac
+                */
+               if (clk->recalc) {
+                       ret = clk->recalc(clk);
+                       if (ret)
+                               goto err;
+               }
+       }
+       clk->usage_count++;
+err:
+       return ret;
+}
+
 /*
  * clk_enable - inform the system when the clock source should be running.
  * @clk: clock source
@@ -77,17 +172,9 @@ int clk_enable(struct clk *clk)
        unsigned long flags;
        int ret = 0;
 
-       if (!clk || IS_ERR(clk))
-               return -EFAULT;
-
        spin_lock_irqsave(&clocks_lock, flags);
-       if (clk->usage_count == 0) {
-               if (clk->ops && clk->ops->enable)
-                       ret = clk->ops->enable(clk);
-       }
-       clk->usage_count++;
+       ret = do_clk_enable(clk);
        spin_unlock_irqrestore(&clocks_lock, flags);
-
        return ret;
 }
 EXPORT_SYMBOL(clk_enable);
@@ -108,17 +195,8 @@ void clk_disable(struct clk *clk)
 {
        unsigned long flags;
 
-       if (!clk || IS_ERR(clk))
-               return;
-
-       WARN_ON(clk->usage_count == 0);
-
        spin_lock_irqsave(&clocks_lock, flags);
-       clk->usage_count--;
-       if (clk->usage_count == 0) {
-               if (clk->ops && clk->ops->disable)
-                       clk->ops->disable(clk);
-       }
+       do_clk_disable(clk);
        spin_unlock_irqrestore(&clocks_lock, flags);
 }
 EXPORT_SYMBOL(clk_disable);
@@ -152,15 +230,14 @@ int clk_set_parent(struct clk *clk, struct clk *parent)
        int i, found = 0, val = 0;
        unsigned long flags;
 
-       if (!clk || IS_ERR(clk) || !parent || IS_ERR(parent))
+       if (!clk || !parent)
                return -EFAULT;
-       if (clk->usage_count)
-               return -EBUSY;
-       if (!clk->pclk_sel)
-               return -EPERM;
        if (clk->pclk == parent)
                return 0;
+       if (!clk->pclk_sel)
+               return -EPERM;
 
+       /* check if requested parent is in clk parent list */
        for (i = 0; i < clk->pclk_sel->pclk_count; i++) {
                if (clk->pclk_sel->pclk_info[i].pclk == parent) {
                        found = 1;
@@ -175,13 +252,14 @@ int clk_set_parent(struct clk *clk, struct clk *parent)
        /* reflect parent change in hardware */
        val = readl(clk->pclk_sel->pclk_sel_reg);
        val &= ~(clk->pclk_sel->pclk_sel_mask << clk->pclk_sel_shift);
-       val |= clk->pclk_sel->pclk_info[i].pclk_mask << clk->pclk_sel_shift;
+       val |= clk->pclk_sel->pclk_info[i].pclk_val << clk->pclk_sel_shift;
        writel(val, clk->pclk_sel->pclk_sel_reg);
        spin_unlock_irqrestore(&clocks_lock, flags);
 
        /* reflect parent change in software */
-       clk->recalc(clk);
-       propagate_rate(&clk->children);
+       clk_reparent(clk, &clk->pclk_sel->pclk_info[i]);
+
+       propagate_rate(clk, 0);
        return 0;
 }
 EXPORT_SYMBOL(clk_set_parent);
@@ -195,19 +273,37 @@ EXPORT_SYMBOL(clk_set_parent);
  */
 int clk_set_rate(struct clk *clk, unsigned long rate)
 {
-       /* TODO */
-       return -EINVAL;
+       unsigned long flags;
+       int ret = -EINVAL;
+
+       if (!clk || !rate)
+               return -EFAULT;
+
+       if (clk->set_rate) {
+               spin_lock_irqsave(&clocks_lock, flags);
+               ret = clk->set_rate(clk, rate);
+               if (!ret)
+                       /* if successful -> propagate */
+                       propagate_rate(clk, 0);
+               spin_unlock_irqrestore(&clocks_lock, flags);
+       } else if (clk->pclk) {
+               u32 mult = clk->div_factor ? clk->div_factor : 1;
+               ret = clk_set_rate(clk->pclk, mult * rate);
+       }
+
+       return ret;
 }
 EXPORT_SYMBOL(clk_set_rate);
 
 /* registers clock in platform clock framework */
 void clk_register(struct clk_lookup *cl)
 {
-       struct clk *clk = cl->clk;
+       struct clk *clk;
        unsigned long flags;
 
-       if (!clk || IS_ERR(clk))
+       if (!cl || !cl->clk)
                return;
+       clk = cl->clk;
 
        spin_lock_irqsave(&clocks_lock, flags);
 
@@ -220,15 +316,24 @@ void clk_register(struct clk_lookup *cl)
        /* root clock don't have any parents */
        if (!clk->pclk && !clk->pclk_sel) {
                list_add(&clk->sibling, &root_clks);
-               /* add clocks with only one parent to parent's children list */
        } else if (clk->pclk && !clk->pclk_sel) {
+               /* add clocks with only one parent to parent's children list */
                list_add(&clk->sibling, &clk->pclk->children);
        } else {
-               /* add clocks with > 1 parent to 1st parent's children list */
-               clk->pclk = clk->pclk_sel->pclk_info[0].pclk;
-               list_add(&clk->sibling,
-                        &clk->pclk_sel->pclk_info[0].pclk->children);
+               /* clocks with more than one parent */
+               struct pclk_info *pclk_info;
+
+               pclk_info = pclk_info_get(clk);
+               if (!pclk_info) {
+                       pr_err("CLKDEV: invalid pclk info of clk with"
+                                       " %s dev_id and %s con_id\n",
+                                       cl->dev_id, cl->con_id);
+               } else {
+                       clk->pclk = pclk_info->pclk;
+                       list_add(&clk->sibling, &pclk_info->pclk->children);
+               }
        }
+
        spin_unlock_irqrestore(&clocks_lock, flags);
 
        /* add clock to arm clockdev framework */
@@ -236,56 +341,142 @@ void clk_register(struct clk_lookup *cl)
 }
 
 /**
- * propagate_rate - recalculate and propagate all clocks in list head
+ * propagate_rate - recalculate and propagate all clocks to children
+ * @pclk: parent clock required to be propogated
+ * @on_init: flag for enabling clocks which are ENABLED_ON_INIT.
  *
- * Recalculates all root clocks in list head, which if the clock's .recalc is
- * set correctly, should also propagate their rates.
+ * Recalculates all children clocks
  */
-static void propagate_rate(struct list_head *lhead)
+void propagate_rate(struct clk *pclk, int on_init)
 {
-       struct clk *clkp, *_temp;
+       struct clk *clk, *_temp;
+       int ret = 0;
+
+       list_for_each_entry_safe(clk, _temp, &pclk->children, sibling) {
+               if (clk->recalc) {
+                       ret = clk->recalc(clk);
+                       /*
+                        * recalc will return error if clk out is not programmed
+                        * In this case configure default rate.
+                        */
+                       if (ret && clk->set_rate)
+                               clk->set_rate(clk, 0);
+               }
+               propagate_rate(clk, on_init);
+
+               if (!on_init)
+                       continue;
 
-       list_for_each_entry_safe(clkp, _temp, lhead, sibling) {
-               if (clkp->recalc)
-                       clkp->recalc(clkp);
-               propagate_rate(&clkp->children);
+               /* Enable clks enabled on init, in software view */
+               if (clk->flags & ENABLED_ON_INIT)
+                       do_clk_enable(clk);
        }
 }
 
-/* returns current programmed clocks clock info structure */
-static struct pclk_info *pclk_info_get(struct clk *clk)
+/**
+ * round_rate_index - return closest programmable rate index in rate_config tbl
+ * @clk: ptr to clock structure
+ * @drate: desired rate
+ * @rate: final rate will be returned in this variable only.
+ *
+ * Finds index in rate_config for highest clk rate which is less than
+ * requested rate. If there is no clk rate lesser than requested rate then
+ * -EINVAL is returned. This routine assumes that rate_config is written
+ * in incrementing order of clk rates.
+ * If drate passed is zero then default rate is programmed.
+ */
+static int
+round_rate_index(struct clk *clk, unsigned long drate, unsigned long *rate)
 {
-       unsigned int mask, i;
-       unsigned long flags;
-       struct pclk_info *info = NULL;
+       unsigned long tmp = 0, prev_rate = 0;
+       int index;
 
-       spin_lock_irqsave(&clocks_lock, flags);
-       mask = (readl(clk->pclk_sel->pclk_sel_reg) >> clk->pclk_sel_shift)
-                       & clk->pclk_sel->pclk_sel_mask;
+       if (!clk->calc_rate)
+               return -EFAULT;
 
-       for (i = 0; i < clk->pclk_sel->pclk_count; i++) {
-               if (clk->pclk_sel->pclk_info[i].pclk_mask == mask)
-                       info = &clk->pclk_sel->pclk_info[i];
+       if (!drate)
+               return -EINVAL;
+
+       /*
+        * This loops ends on two conditions:
+        * - as soon as clk is found with rate greater than requested rate.
+        * - if all clks in rate_config are smaller than requested rate.
+        */
+       for (index = 0; index < clk->rate_config.count; index++) {
+               prev_rate = tmp;
+               tmp = clk->calc_rate(clk, index);
+               if (drate < tmp) {
+                       index--;
+                       break;
+               }
        }
-       spin_unlock_irqrestore(&clocks_lock, flags);
+       /* return if can't find suitable clock */
+       if (index < 0) {
+               index = -EINVAL;
+               *rate = 0;
+       } else if (index == clk->rate_config.count) {
+               /* program with highest clk rate possible */
+               index = clk->rate_config.count - 1;
+               *rate = tmp;
+       } else
+               *rate = prev_rate;
 
-       return info;
+       return index;
 }
 
-/*
- * Set pclk as cclk's parent and add clock sibling node to current parents
- * children list
+/**
+ * clk_round_rate - adjust a rate to the exact rate a clock can provide
+ * @clk: clock source
+ * @rate: desired clock rate in Hz
+ *
+ * Returns rounded clock rate in Hz, or negative errno.
  */
-static void change_parent(struct clk *cclk, struct clk *pclk)
+long clk_round_rate(struct clk *clk, unsigned long drate)
 {
-       unsigned long flags;
+       long rate = 0;
+       int index;
+
+       /*
+        * propagate call to parent who supports calc_rate. Similar approach is
+        * used in clk_set_rate.
+        */
+       if (!clk->calc_rate) {
+               u32 mult;
+               if (!clk->pclk)
+                       return clk->rate;
+
+               mult = clk->div_factor ? clk->div_factor : 1;
+               return clk_round_rate(clk->pclk, mult * drate) / mult;
+       }
 
-       spin_lock_irqsave(&clocks_lock, flags);
-       list_del(&cclk->sibling);
-       list_add(&cclk->sibling, &pclk->children);
+       index = round_rate_index(clk, drate, &rate);
+       if (index >= 0)
+               return rate;
+       else
+               return index;
+}
+EXPORT_SYMBOL(clk_round_rate);
 
-       cclk->pclk = pclk;
-       spin_unlock_irqrestore(&clocks_lock, flags);
+/*All below functions are called with lock held */
+
+/*
+ * Calculates pll clk rate for specific value of mode, m, n and p
+ *
+ * In normal mode
+ * rate = (2 * M[15:8] * Fin)/(N * 2^P)
+ *
+ * In Dithered mode
+ * rate = (2 * M[15:0] * Fin)/(256 * N * 2^P)
+ */
+unsigned long pll_calc_rate(struct clk *clk, int index)
+{
+       unsigned long rate = clk->pclk->rate;
+       struct pll_rate_tbl *tbls = clk->rate_config.tbls;
+       unsigned int mode;
+
+       mode = tbls[index].mode ? 256 : 1;
+       return (((2 * rate / 10000) * tbls[index].m) /
+                       (mode * tbls[index].n * (1 << tbls[index].p))) * 10000;
 }
 
 /*
@@ -297,13 +488,11 @@ static void change_parent(struct clk *cclk, struct clk *pclk)
  * In Dithered mode
  * rate = (2 * M[15:0] * Fin)/(256 * N * 2^P)
  */
-void pll_clk_recalc(struct clk *clk)
+int pll_clk_recalc(struct clk *clk)
 {
        struct pll_clk_config *config = clk->private_data;
        unsigned int num = 2, den = 0, val, mode = 0;
-       unsigned long flags;
 
-       spin_lock_irqsave(&clocks_lock, flags);
        mode = (readl(config->mode_reg) >> config->masks->mode_shift) &
                config->masks->mode_mask;
 
@@ -325,22 +514,120 @@ void pll_clk_recalc(struct clk *clk)
                den *= 256;
        }
 
+       if (!den)
+               return -EINVAL;
+
        clk->rate = (((clk->pclk->rate/10000) * num) / den) * 10000;
-       spin_unlock_irqrestore(&clocks_lock, flags);
+       return 0;
+}
+
+/*
+ * Configures new clock rate of pll
+ */
+int pll_clk_set_rate(struct clk *clk, unsigned long desired_rate)
+{
+       struct pll_rate_tbl *tbls = clk->rate_config.tbls;
+       struct pll_clk_config *config = clk->private_data;
+       unsigned long val, rate;
+       int i;
+
+       i = round_rate_index(clk, desired_rate, &rate);
+       if (i < 0)
+               return i;
+
+       val = readl(config->mode_reg) &
+               ~(config->masks->mode_mask << config->masks->mode_shift);
+       val |= (tbls[i].mode & config->masks->mode_mask) <<
+               config->masks->mode_shift;
+       writel(val, config->mode_reg);
+
+       val = readl(config->cfg_reg) &
+               ~(config->masks->div_p_mask << config->masks->div_p_shift);
+       val |= (tbls[i].p & config->masks->div_p_mask) <<
+               config->masks->div_p_shift;
+       val &= ~(config->masks->div_n_mask << config->masks->div_n_shift);
+       val |= (tbls[i].n & config->masks->div_n_mask) <<
+               config->masks->div_n_shift;
+       val &= ~(config->masks->dith_fdbk_m_mask <<
+                       config->masks->dith_fdbk_m_shift);
+       if (tbls[i].mode)
+               val |= (tbls[i].m & config->masks->dith_fdbk_m_mask) <<
+                       config->masks->dith_fdbk_m_shift;
+       else
+               val |= (tbls[i].m & config->masks->norm_fdbk_m_mask) <<
+                       config->masks->norm_fdbk_m_shift;
+
+       writel(val, config->cfg_reg);
+
+       clk->rate = rate;
+
+       return 0;
+}
+
+/*
+ * Calculates ahb, apb clk rate for specific value of div
+ */
+unsigned long bus_calc_rate(struct clk *clk, int index)
+{
+       unsigned long rate = clk->pclk->rate;
+       struct bus_rate_tbl *tbls = clk->rate_config.tbls;
+
+       return rate / (tbls[index].div + 1);
 }
 
 /* calculates current programmed rate of ahb or apb bus */
-void bus_clk_recalc(struct clk *clk)
+int bus_clk_recalc(struct clk *clk)
 {
        struct bus_clk_config *config = clk->private_data;
        unsigned int div;
-       unsigned long flags;
 
-       spin_lock_irqsave(&clocks_lock, flags);
        div = ((readl(config->reg) >> config->masks->shift) &
                        config->masks->mask) + 1;
+
+       if (!div)
+               return -EINVAL;
+
        clk->rate = (unsigned long)clk->pclk->rate / div;
-       spin_unlock_irqrestore(&clocks_lock, flags);
+       return 0;
+}
+
+/* Configures new clock rate of AHB OR APB bus */
+int bus_clk_set_rate(struct clk *clk, unsigned long desired_rate)
+{
+       struct bus_rate_tbl *tbls = clk->rate_config.tbls;
+       struct bus_clk_config *config = clk->private_data;
+       unsigned long val, rate;
+       int i;
+
+       i = round_rate_index(clk, desired_rate, &rate);
+       if (i < 0)
+               return i;
+
+       val = readl(config->reg) &
+               ~(config->masks->mask << config->masks->shift);
+       val |= (tbls[i].div & config->masks->mask) << config->masks->shift;
+       writel(val, config->reg);
+
+       clk->rate = rate;
+
+       return 0;
+}
+
+/*
+ * gives rate for different values of eq, x and y
+ *
+ * Fout from synthesizer can be given from two equations:
+ * Fout1 = (Fin * X/Y)/2               EQ1
+ * Fout2 = Fin * X/Y                   EQ2
+ */
+unsigned long aux_calc_rate(struct clk *clk, int index)
+{
+       unsigned long rate = clk->pclk->rate;
+       struct aux_rate_tbl *tbls = clk->rate_config.tbls;
+       u8 eq = tbls[index].eq ? 1 : 2;
+
+       return (((rate/10000) * tbls[index].xscale) /
+                       (tbls[index].yscale * eq)) * 10000;
 }
 
 /*
@@ -353,47 +640,76 @@ void bus_clk_recalc(struct clk *clk)
  *
  * Selection of eqn 1 or 2 is programmed in register
  */
-void aux_clk_recalc(struct clk *clk)
+int aux_clk_recalc(struct clk *clk)
 {
        struct aux_clk_config *config = clk->private_data;
-       struct pclk_info *pclk_info = NULL;
        unsigned int num = 1, den = 1, val, eqn;
-       unsigned long flags;
 
-       /* get current programmed parent */
-       pclk_info = pclk_info_get(clk);
-       if (!pclk_info) {
-               spin_lock_irqsave(&clocks_lock, flags);
-               clk->pclk = NULL;
-               clk->rate = 0;
-               spin_unlock_irqrestore(&clocks_lock, flags);
-               return;
-       }
+       val = readl(config->synth_reg);
 
-       change_parent(clk, pclk_info->pclk);
+       eqn = (val >> config->masks->eq_sel_shift) &
+               config->masks->eq_sel_mask;
+       if (eqn == config->masks->eq1_mask)
+               den *= 2;
 
-       spin_lock_irqsave(&clocks_lock, flags);
-       if (pclk_info->scalable) {
-               val = readl(config->synth_reg);
-
-               eqn = (val >> config->masks->eq_sel_shift) &
-                       config->masks->eq_sel_mask;
-               if (eqn == config->masks->eq1_mask)
-                       den *= 2;
-
-               /* calculate numerator */
-               num = (val >> config->masks->xscale_sel_shift) &
-                       config->masks->xscale_sel_mask;
-
-               /* calculate denominator */
-               den *= (val >> config->masks->yscale_sel_shift) &
-                       config->masks->yscale_sel_mask;
-               val = (((clk->pclk->rate/10000) * num) / den) * 10000;
-       } else
-               val = clk->pclk->rate;
+       /* calculate numerator */
+       num = (val >> config->masks->xscale_sel_shift) &
+               config->masks->xscale_sel_mask;
 
-       clk->rate = val;
-       spin_unlock_irqrestore(&clocks_lock, flags);
+       /* calculate denominator */
+       den *= (val >> config->masks->yscale_sel_shift) &
+               config->masks->yscale_sel_mask;
+
+       if (!den)
+               return -EINVAL;
+
+       clk->rate = (((clk->pclk->rate/10000) * num) / den) * 10000;
+       return 0;
+}
+
+/* Configures new clock rate of auxiliary synthesizers used by: UART, FIRDA*/
+int aux_clk_set_rate(struct clk *clk, unsigned long desired_rate)
+{
+       struct aux_rate_tbl *tbls = clk->rate_config.tbls;
+       struct aux_clk_config *config = clk->private_data;
+       unsigned long val, rate;
+       int i;
+
+       i = round_rate_index(clk, desired_rate, &rate);
+       if (i < 0)
+               return i;
+
+       val = readl(config->synth_reg) &
+               ~(config->masks->eq_sel_mask << config->masks->eq_sel_shift);
+       val |= (tbls[i].eq & config->masks->eq_sel_mask) <<
+               config->masks->eq_sel_shift;
+       val &= ~(config->masks->xscale_sel_mask <<
+                       config->masks->xscale_sel_shift);
+       val |= (tbls[i].xscale & config->masks->xscale_sel_mask) <<
+               config->masks->xscale_sel_shift;
+       val &= ~(config->masks->yscale_sel_mask <<
+                       config->masks->yscale_sel_shift);
+       val |= (tbls[i].yscale & config->masks->yscale_sel_mask) <<
+               config->masks->yscale_sel_shift;
+       writel(val, config->synth_reg);
+
+       clk->rate = rate;
+
+       return 0;
+}
+
+/*
+ * Calculates gpt clk rate for different values of mscale and nscale
+ *
+ * Fout= Fin/((2 ^ (N+1)) * (M+1))
+ */
+unsigned long gpt_calc_rate(struct clk *clk, int index)
+{
+       unsigned long rate = clk->pclk->rate;
+       struct gpt_rate_tbl *tbls = clk->rate_config.tbls;
+
+       return rate / ((1 << (tbls[index].nscale + 1)) *
+                       (tbls[index].mscale + 1));
 }
 
 /*
@@ -401,49 +717,142 @@ void aux_clk_recalc(struct clk *clk)
  * Fout from synthesizer can be given from below equations:
  * Fout= Fin/((2 ^ (N+1)) * (M+1))
  */
-void gpt_clk_recalc(struct clk *clk)
+int gpt_clk_recalc(struct clk *clk)
 {
        struct gpt_clk_config *config = clk->private_data;
-       struct pclk_info *pclk_info = NULL;
        unsigned int div = 1, val;
-       unsigned long flags;
 
-       pclk_info = pclk_info_get(clk);
-       if (!pclk_info) {
-               spin_lock_irqsave(&clocks_lock, flags);
-               clk->pclk = NULL;
-               clk->rate = 0;
-               spin_unlock_irqrestore(&clocks_lock, flags);
-               return;
-       }
+       val = readl(config->synth_reg);
+       div += (val >> config->masks->mscale_sel_shift) &
+               config->masks->mscale_sel_mask;
+       div *= 1 << (((val >> config->masks->nscale_sel_shift) &
+                               config->masks->nscale_sel_mask) + 1);
 
-       change_parent(clk, pclk_info->pclk);
-
-       spin_lock_irqsave(&clocks_lock, flags);
-       if (pclk_info->scalable) {
-               val = readl(config->synth_reg);
-               div += (val >> config->masks->mscale_sel_shift) &
-                       config->masks->mscale_sel_mask;
-               div *= 1 << (((val >> config->masks->nscale_sel_shift) &
-                                       config->masks->nscale_sel_mask) + 1);
-       }
+       if (!div)
+               return -EINVAL;
 
        clk->rate = (unsigned long)clk->pclk->rate / div;
-       spin_unlock_irqrestore(&clocks_lock, flags);
+       return 0;
+}
+
+/* Configures new clock rate of gptiliary synthesizers used by: UART, FIRDA*/
+int gpt_clk_set_rate(struct clk *clk, unsigned long desired_rate)
+{
+       struct gpt_rate_tbl *tbls = clk->rate_config.tbls;
+       struct gpt_clk_config *config = clk->private_data;
+       unsigned long val, rate;
+       int i;
+
+       i = round_rate_index(clk, desired_rate, &rate);
+       if (i < 0)
+               return i;
+
+       val = readl(config->synth_reg) & ~(config->masks->mscale_sel_mask <<
+                       config->masks->mscale_sel_shift);
+       val |= (tbls[i].mscale & config->masks->mscale_sel_mask) <<
+               config->masks->mscale_sel_shift;
+       val &= ~(config->masks->nscale_sel_mask <<
+                       config->masks->nscale_sel_shift);
+       val |= (tbls[i].nscale & config->masks->nscale_sel_mask) <<
+               config->masks->nscale_sel_shift;
+       writel(val, config->synth_reg);
+
+       clk->rate = rate;
+
+       return 0;
+}
+
+/*
+ * Calculates clcd clk rate for different values of div
+ *
+ * Fout from synthesizer can be given from below equation:
+ * Fout= Fin/2*div (division factor)
+ * div is 17 bits:-
+ *     0-13 (fractional part)
+ *     14-16 (integer part)
+ * To calculate Fout we left shift val by 14 bits and divide Fin by
+ * complete div (including fractional part) and then right shift the
+ * result by 14 places.
+ */
+unsigned long clcd_calc_rate(struct clk *clk, int index)
+{
+       unsigned long rate = clk->pclk->rate;
+       struct clcd_rate_tbl *tbls = clk->rate_config.tbls;
+
+       rate /= 1000;
+       rate <<= 12;
+       rate /= (2 * tbls[index].div);
+       rate >>= 12;
+       rate *= 1000;
+
+       return rate;
+}
+
+/*
+ * calculates current programmed rate of clcd synthesizer
+ * Fout from synthesizer can be given from below equation:
+ * Fout= Fin/2*div (division factor)
+ * div is 17 bits:-
+ *     0-13 (fractional part)
+ *     14-16 (integer part)
+ * To calculate Fout we left shift val by 14 bits and divide Fin by
+ * complete div (including fractional part) and then right shift the
+ * result by 14 places.
+ */
+int clcd_clk_recalc(struct clk *clk)
+{
+       struct clcd_clk_config *config = clk->private_data;
+       unsigned int div = 1;
+       unsigned long prate;
+       unsigned int val;
+
+       val = readl(config->synth_reg);
+       div = (val >> config->masks->div_factor_shift) &
+               config->masks->div_factor_mask;
+
+       if (!div)
+               return -EINVAL;
+
+       prate = clk->pclk->rate / 1000; /* first level division, make it KHz */
+
+       clk->rate = (((unsigned long)prate << 12) / (2 * div)) >> 12;
+       clk->rate *= 1000;
+       return 0;
+}
+
+/* Configures new clock rate of auxiliary synthesizers used by: UART, FIRDA*/
+int clcd_clk_set_rate(struct clk *clk, unsigned long desired_rate)
+{
+       struct clcd_rate_tbl *tbls = clk->rate_config.tbls;
+       struct clcd_clk_config *config = clk->private_data;
+       unsigned long val, rate;
+       int i;
+
+       i = round_rate_index(clk, desired_rate, &rate);
+       if (i < 0)
+               return i;
+
+       val = readl(config->synth_reg) & ~(config->masks->div_factor_mask <<
+                       config->masks->div_factor_shift);
+       val |= (tbls[i].div & config->masks->div_factor_mask) <<
+               config->masks->div_factor_shift;
+       writel(val, config->synth_reg);
+
+       clk->rate = rate;
+
+       return 0;
 }
 
 /*
  * Used for clocks that always have value as the parent clock divided by a
  * fixed divisor
  */
-void follow_parent(struct clk *clk)
+int follow_parent(struct clk *clk)
 {
-       unsigned long flags;
        unsigned int div_factor = (clk->div_factor < 1) ? 1 : clk->div_factor;
 
-       spin_lock_irqsave(&clocks_lock, flags);
        clk->rate = clk->pclk->rate/div_factor;
-       spin_unlock_irqrestore(&clocks_lock, flags);
+       return 0;
 }
 
 /**
@@ -454,5 +863,25 @@ void follow_parent(struct clk *clk)
  */
 void recalc_root_clocks(void)
 {
-       propagate_rate(&root_clks);
+       struct clk *pclk;
+       unsigned long flags;
+       int ret = 0;
+
+       spin_lock_irqsave(&clocks_lock, flags);
+       list_for_each_entry(pclk, &root_clks, sibling) {
+               if (pclk->recalc) {
+                       ret = pclk->recalc(pclk);
+                       /*
+                        * recalc will return error if clk out is not programmed
+                        * In this case configure default clock.
+                        */
+                       if (ret && pclk->set_rate)
+                               pclk->set_rate(pclk, 0);
+               }
+               propagate_rate(pclk, 1);
+               /* Enable clks enabled on init, in software view */
+               if (pclk->flags & ENABLED_ON_INIT)
+                       do_clk_enable(pclk);
+       }
+       spin_unlock_irqrestore(&clocks_lock, flags);
 }
index 863d9e98392792f95810bc99b5961e6b65541dca..5a601d830971c1d467f0135b9e8cf73ba2740202 100644 (file)
@@ -21,6 +21,7 @@
 /* clk structure flags */
 #define        ALWAYS_ENABLED          (1 << 0) /* clock always enabled */
 #define        RESET_TO_ENABLE         (1 << 1) /* reset register bit to enable clk */
+#define        ENABLED_ON_INIT         (1 << 2) /* clocks enabled at init */
 
 /**
  * struct clkops - clock operations
@@ -35,13 +36,11 @@ struct clkops {
 /**
  * struct pclk_info - parents info
  * @pclk: pointer to parent clk
- * @pclk_mask: value to be written for selecting this parent
- * @scalable: Is parent scalable (1 - YES, 0 - NO)
+ * @pclk_val: value to be written for selecting this parent
  */
 struct pclk_info {
        struct clk *pclk;
-       u8 pclk_mask;
-       u8 scalable;
+       u8 pclk_val;
 };
 
 /**
@@ -58,6 +57,18 @@ struct pclk_sel {
        unsigned int pclk_sel_mask;
 };
 
+/**
+ * struct rate_config - clk rate configurations
+ * @tbls: array of device specific clk rate tables, in ascending order of rates
+ * @count: size of tbls array
+ * @default_index: default setting when originally disabled
+ */
+struct rate_config {
+       void *tbls;
+       u8 count;
+       u8 default_index;
+};
+
 /**
  * struct clk - clock structure
  * @usage_count: num of users who enabled this clock
@@ -67,7 +78,10 @@ struct pclk_sel {
  * @en_reg_bit: clk enable/disable bit
  * @ops: clk enable/disable ops - generic_clkops selected if NULL
  * @recalc: pointer to clock rate recalculate function
- * @div_factor: division factor to parent clock. Only for recalc = follow_parent
+ * @set_rate: pointer to clock set rate function
+ * @calc_rate: pointer to clock get rate function for index
+ * @rate_config: rate configuration information, used by set_rate
+ * @div_factor: division factor to parent clock.
  * @pclk: current parent clk
  * @pclk_sel: pointer to parent selection structure
  * @pclk_sel_shift: register shift for selecting parent of this clock
@@ -82,7 +96,10 @@ struct clk {
        void __iomem *en_reg;
        u8 en_reg_bit;
        const struct clkops *ops;
-       void (*recalc) (struct clk *);
+       int (*recalc) (struct clk *);
+       int (*set_rate) (struct clk *, unsigned long rate);
+       unsigned long (*calc_rate)(struct clk *, int index);
+       struct rate_config rate_config;
        unsigned int div_factor;
 
        struct clk *pclk;
@@ -115,6 +132,14 @@ struct pll_clk_config {
        struct pll_clk_masks *masks;
 };
 
+/* pll clk rate config structure */
+struct pll_rate_tbl {
+       u8 mode;
+       u16 m;
+       u8 n;
+       u8 p;
+};
+
 /* ahb and apb bus configuration structure */
 struct bus_clk_masks {
        u32 mask;
@@ -126,6 +151,11 @@ struct bus_clk_config {
        struct bus_clk_masks *masks;
 };
 
+/* ahb and apb clk bus rate config structure */
+struct bus_rate_tbl {
+       u8 div;
+};
+
 /* Aux clk configuration structure: applicable to UART and FIRDA */
 struct aux_clk_masks {
        u32 eq_sel_mask;
@@ -143,6 +173,13 @@ struct aux_clk_config {
        struct aux_clk_masks *masks;
 };
 
+/* aux clk rate config structure */
+struct aux_rate_tbl {
+       u16 xscale;
+       u16 yscale;
+       u8 eq;
+};
+
 /* GPT clk configuration structure */
 struct gpt_clk_masks {
        u32 mscale_sel_mask;
@@ -156,15 +193,48 @@ struct gpt_clk_config {
        struct gpt_clk_masks *masks;
 };
 
+/* gpt clk rate config structure */
+struct gpt_rate_tbl {
+       u16 mscale;
+       u16 nscale;
+};
+
+/* clcd clk configuration structure */
+struct clcd_synth_masks {
+       u32 div_factor_mask;
+       u32 div_factor_shift;
+};
+
+struct clcd_clk_config {
+       void __iomem *synth_reg;
+       struct clcd_synth_masks *masks;
+};
+
+/* clcd clk rate config structure */
+struct clcd_rate_tbl {
+       u16 div;
+};
+
 /* platform specific clock functions */
 void clk_register(struct clk_lookup *cl);
 void recalc_root_clocks(void);
 
-/* clock recalc functions */
-void follow_parent(struct clk *clk);
-void pll_clk_recalc(struct clk *clk);
-void bus_clk_recalc(struct clk *clk);
-void gpt_clk_recalc(struct clk *clk);
-void aux_clk_recalc(struct clk *clk);
+/* clock recalc & set rate functions */
+int follow_parent(struct clk *clk);
+unsigned long pll_calc_rate(struct clk *clk, int index);
+int pll_clk_recalc(struct clk *clk);
+int pll_clk_set_rate(struct clk *clk, unsigned long desired_rate);
+unsigned long bus_calc_rate(struct clk *clk, int index);
+int bus_clk_recalc(struct clk *clk);
+int bus_clk_set_rate(struct clk *clk, unsigned long desired_rate);
+unsigned long gpt_calc_rate(struct clk *clk, int index);
+int gpt_clk_recalc(struct clk *clk);
+int gpt_clk_set_rate(struct clk *clk, unsigned long desired_rate);
+unsigned long aux_calc_rate(struct clk *clk, int index);
+int aux_clk_recalc(struct clk *clk);
+int aux_clk_set_rate(struct clk *clk, unsigned long desired_rate);
+unsigned long clcd_calc_rate(struct clk *clk, int index);
+int clcd_clk_recalc(struct clk *clk);
+int clcd_clk_set_rate(struct clk *clk, unsigned long desired_rate);
 
 #endif /* __PLAT_CLOCK_H */