unsigned int dma_mask_size : 8;
/* Chipset specific GTT setup */
int (*setup)(void);
+ /* This should undo anything done in ->setup() save the unmapping
+ * of the mmio register file, that's done in the generic code. */
+ void (*cleanup)(void);
void (*write_entry)(dma_addr_t addr, unsigned int entry, unsigned int flags);
/* Flags is a more or less chipset specific opaque value.
* For chipsets that need to support old ums (non-gem) code, this
static void intel_gtt_cleanup(void)
{
- if (intel_private.i9xx_flush_page)
- iounmap(intel_private.i9xx_flush_page);
- if (intel_private.resource_valid)
- release_resource(&intel_private.ifp_resource);
- intel_private.ifp_resource.start = 0;
- intel_private.resource_valid = 0;
+ intel_private.driver->cleanup();
+
iounmap(intel_private.gtt);
iounmap(intel_private.registers);
intel_private.gtt = ioremap(intel_private.gtt_bus_addr,
gtt_map_size);
if (!intel_private.gtt) {
+ intel_private.driver->cleanup();
iounmap(intel_private.registers);
return -ENOMEM;
}
/* we have to call this as early as possible after the MMIO base address is known */
intel_private.base.gtt_stolen_entries = intel_gtt_stolen_entries();
if (intel_private.base.gtt_stolen_entries == 0) {
+ intel_private.driver->cleanup();
iounmap(intel_private.registers);
iounmap(intel_private.gtt);
return -ENOMEM;
return 0;
}
-static void intel_i830_fini_flush(void)
+static void i830_cleanup(void)
{
kunmap(intel_private.i8xx_page);
intel_private.i8xx_flush_page = NULL;
intel_private.i8xx_flush_page = kmap(intel_private.i8xx_page);
if (!intel_private.i8xx_flush_page)
- intel_i830_fini_flush();
+ i830_cleanup();
}
/* The chipset_flush interface needs to get data that has already been
"can't ioremap flush page - no chipset flushing\n");
}
+static void i9xx_cleanup(void)
+{
+ if (intel_private.i9xx_flush_page)
+ iounmap(intel_private.i9xx_flush_page);
+ if (intel_private.resource_valid)
+ release_resource(&intel_private.ifp_resource);
+ intel_private.ifp_resource.start = 0;
+ intel_private.resource_valid = 0;
+}
+
static void i9xx_chipset_flush(void)
{
if (intel_private.i9xx_flush_page)
writel(addr | pte_flags, intel_private.gtt + entry);
}
+static void gen6_cleanup(void)
+{
+}
+
static int i9xx_setup(void)
{
u32 reg_addr;
static const struct intel_gtt_driver i8xx_gtt_driver = {
.gen = 2,
.setup = i830_setup,
+ .cleanup = i830_cleanup,
.write_entry = i830_write_entry,
.dma_mask_size = 32,
.check_flags = i830_check_flags,
static const struct intel_gtt_driver i915_gtt_driver = {
.gen = 3,
.setup = i9xx_setup,
+ .cleanup = i9xx_cleanup,
/* i945 is the last gpu to need phys mem (for overlay and cursors). */
.write_entry = i830_write_entry,
.dma_mask_size = 32,
.gen = 3,
.is_g33 = 1,
.setup = i9xx_setup,
+ .cleanup = i9xx_cleanup,
.write_entry = i965_write_entry,
.dma_mask_size = 36,
.check_flags = i830_check_flags,
.gen = 3,
.is_pineview = 1, .is_g33 = 1,
.setup = i9xx_setup,
+ .cleanup = i9xx_cleanup,
.write_entry = i965_write_entry,
.dma_mask_size = 36,
.check_flags = i830_check_flags,
static const struct intel_gtt_driver i965_gtt_driver = {
.gen = 4,
.setup = i9xx_setup,
+ .cleanup = i9xx_cleanup,
.write_entry = i965_write_entry,
.dma_mask_size = 36,
.check_flags = i830_check_flags,
static const struct intel_gtt_driver g4x_gtt_driver = {
.gen = 5,
.setup = i9xx_setup,
+ .cleanup = i9xx_cleanup,
.write_entry = i965_write_entry,
.dma_mask_size = 36,
.check_flags = i830_check_flags,
.gen = 5,
.is_ironlake = 1,
.setup = i9xx_setup,
+ .cleanup = i9xx_cleanup,
.write_entry = i965_write_entry,
.dma_mask_size = 36,
.check_flags = i830_check_flags,
static const struct intel_gtt_driver sandybridge_gtt_driver = {
.gen = 6,
.setup = i9xx_setup,
+ .cleanup = gen6_cleanup,
.write_entry = gen6_write_entry,
.dma_mask_size = 40,
.check_flags = gen6_check_flags,