usb: max-3421: Prevent corruption of freed memory

commit b5fdf5c6e6bee35837e160c00ac89327bdad031b upstream.

The MAX-3421 USB driver remembers the state of the USB toggles for a
device/endpoint. To save SPI writes, this was only done when a new
device/endpoint was being used. Unfortunately, if the old device was
removed, this would cause writes to freed memory.

To fix this, a simpler scheme is used. The toggles are read from
hardware when a URB is completed, and the toggles are always written to
hardware when any URB transaction is started. This will cause a few more
SPI transactions, but no causes kernel panics.

Fixes: 2d53139f3162 ("Add support for using a MAX3421E chip as a host driver.")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz>
Link: https://lore.kernel.org/r/20210625031456.8632-1-mark.tomlinson@alliedtelesis.co.nz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/usb/host/max3421-hcd.c b/drivers/usb/host/max3421-hcd.c
index 369869a29ebd4d2ead3fda4efcddeb1d745a6d5c..1654a1bc641413b391f3b206fe63d6c5ad52a33e 100644 (file)
--- a/drivers/usb/host/max3421-hcd.c
+++ b/drivers/usb/host/max3421-hcd.c
@@ -149,8 +149,6 @@ struct max3421_hcd {
         */
        struct urb *curr_urb;
        enum scheduling_pass sched_pass;
-       struct usb_device *loaded_dev;  /* dev that's loaded into the chip */
-       int loaded_epnum;               /* epnum whose toggles are loaded */
        int urb_done;                   /* > 0 -> no errors, < 0: errno */
        size_t curr_len;
        u8 hien;
@@ -488,39 +486,17 @@ max3421_set_speed(struct usb_hcd *hcd, struct usb_device *dev)
  * Caller must NOT hold HCD spinlock.
  */
 static void
-max3421_set_address(struct usb_hcd *hcd, struct usb_device *dev, int epnum,
-                   int force_toggles)
+max3421_set_address(struct usb_hcd *hcd, struct usb_device *dev, int epnum)
 {
-       struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd);
-       int old_epnum, same_ep, rcvtog, sndtog;
-       struct usb_device *old_dev;
+       int rcvtog, sndtog;
        u8 hctl;
 
-       old_dev = max3421_hcd->loaded_dev;
-       old_epnum = max3421_hcd->loaded_epnum;
-
-       same_ep = (dev == old_dev && epnum == old_epnum);
-       if (same_ep && !force_toggles)
-               return;
-
-       if (old_dev && !same_ep) {
-               /* save the old end-points toggles: */
-               u8 hrsl = spi_rd8(hcd, MAX3421_REG_HRSL);
-
-               rcvtog = (hrsl >> MAX3421_HRSL_RCVTOGRD_BIT) & 1;
-               sndtog = (hrsl >> MAX3421_HRSL_SNDTOGRD_BIT) & 1;
-
-               /* no locking: HCD (i.e., we) own toggles, don't we? */
-               usb_settoggle(old_dev, old_epnum, 0, rcvtog);
-               usb_settoggle(old_dev, old_epnum, 1, sndtog);
-       }
        /* setup new endpoint's toggle bits: */
        rcvtog = usb_gettoggle(dev, epnum, 0);
        sndtog = usb_gettoggle(dev, epnum, 1);
        hctl = (BIT(rcvtog + MAX3421_HCTL_RCVTOG0_BIT) |
                BIT(sndtog + MAX3421_HCTL_SNDTOG0_BIT));
 
-       max3421_hcd->loaded_epnum = epnum;
        spi_wr8(hcd, MAX3421_REG_HCTL, hctl);
 
        /*
@@ -528,7 +504,6 @@ max3421_set_address(struct usb_hcd *hcd, struct usb_device *dev, int epnum,
         * address-assignment so it's best to just always load the
         * address whenever the end-point changed/was forced.
         */
-       max3421_hcd->loaded_dev = dev;
        spi_wr8(hcd, MAX3421_REG_PERADDR, dev->devnum);
 }
 
@@ -663,7 +638,7 @@ max3421_select_and_start_urb(struct usb_hcd *hcd)
        struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd);
        struct urb *urb, *curr_urb = NULL;
        struct max3421_ep *max3421_ep;
-       int epnum, force_toggles = 0;
+       int epnum;
        struct usb_host_endpoint *ep;
        struct list_head *pos;
        unsigned long flags;
@@ -773,7 +748,6 @@ done:
                        usb_settoggle(urb->dev, epnum, 0, 1);
                        usb_settoggle(urb->dev, epnum, 1, 1);
                        max3421_ep->pkt_state = PKT_STATE_SETUP;
-                       force_toggles = 1;
                } else
                        max3421_ep->pkt_state = PKT_STATE_TRANSFER;
        }
@@ -781,7 +755,7 @@ done:
        spin_unlock_irqrestore(&max3421_hcd->lock, flags);
 
        max3421_ep->last_active = max3421_hcd->frame_number;
-       max3421_set_address(hcd, urb->dev, epnum, force_toggles);
+       max3421_set_address(hcd, urb->dev, epnum);
        max3421_set_speed(hcd, urb->dev);
        max3421_next_transfer(hcd, 0);
        return 1;
@@ -1376,6 +1350,16 @@ max3421_urb_done(struct usb_hcd *hcd)
                status = 0;
        urb = max3421_hcd->curr_urb;
        if (urb) {
+               /* save the old end-points toggles: */
+               u8 hrsl = spi_rd8(hcd, MAX3421_REG_HRSL);
+               int rcvtog = (hrsl >> MAX3421_HRSL_RCVTOGRD_BIT) & 1;
+               int sndtog = (hrsl >> MAX3421_HRSL_SNDTOGRD_BIT) & 1;
+               int epnum = usb_endpoint_num(&urb->ep->desc);
+
+               /* no locking: HCD (i.e., we) own toggles, don't we? */
+               usb_settoggle(urb->dev, epnum, 0, rcvtog);
+               usb_settoggle(urb->dev, epnum, 1, sndtog);
+
                max3421_hcd->curr_urb = NULL;
                spin_lock_irqsave(&max3421_hcd->lock, flags);
                usb_hcd_unlink_urb_from_ep(hcd, urb);