sky2: better power state management

Improve power management and error handling by using pci_set_power_state(),
instead of driver doing PCI PM register changes in the driver.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 822dd0b1313389506d6a6c4df288ed25ed058fdf..09b94af3e65b15e038a3dbc13159745b6097f404 100644 (file)
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -192,76 +192,52 @@ static u16 gm_phy_read(struct sky2_hw *hw, unsigned port, u16 reg)
        return v;
 }
 
-static void sky2_set_power_state(struct sky2_hw *hw, pci_power_t state)
-{
-       u16 power_control;
-       int vaux;
-
-       pr_debug("sky2_set_power_state %d\n", state);
-       sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
-
-       power_control = sky2_pci_read16(hw, hw->pm_cap + PCI_PM_PMC);
-       vaux = (sky2_read16(hw, B0_CTST) & Y2_VAUX_AVAIL) &&
-               (power_control & PCI_PM_CAP_PME_D3cold);
-
-       power_control = sky2_pci_read16(hw, hw->pm_cap + PCI_PM_CTRL);
 
-       power_control |= PCI_PM_CTRL_PME_STATUS;
-       power_control &= ~(PCI_PM_CTRL_STATE_MASK);
-
-       switch (state) {
-       case PCI_D0:
-               /* switch power to VCC (WA for VAUX problem) */
-               sky2_write8(hw, B0_POWER_CTRL,
-                           PC_VAUX_ENA | PC_VCC_ENA | PC_VAUX_OFF | PC_VCC_ON);
-
-               /* disable Core Clock Division, */
-               sky2_write32(hw, B2_Y2_CLK_CTRL, Y2_CLK_DIV_DIS);
-
-               if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1)
-                       /* enable bits are inverted */
-                       sky2_write8(hw, B2_Y2_CLK_GATE,
-                                   Y2_PCI_CLK_LNK1_DIS | Y2_COR_CLK_LNK1_DIS |
-                                   Y2_CLK_GAT_LNK1_DIS | Y2_PCI_CLK_LNK2_DIS |
-                                   Y2_COR_CLK_LNK2_DIS | Y2_CLK_GAT_LNK2_DIS);
-               else
-                       sky2_write8(hw, B2_Y2_CLK_GATE, 0);
+static void sky2_power_on(struct sky2_hw *hw)
+{
+       /* switch power to VCC (WA for VAUX problem) */
+       sky2_write8(hw, B0_POWER_CTRL,
+                   PC_VAUX_ENA | PC_VCC_ENA | PC_VAUX_OFF | PC_VCC_ON);
 
-               if (hw->chip_id == CHIP_ID_YUKON_EC_U) {
-                       u32 reg1;
+       /* disable Core Clock Division, */
+       sky2_write32(hw, B2_Y2_CLK_CTRL, Y2_CLK_DIV_DIS);
 
-                       sky2_pci_write32(hw, PCI_DEV_REG3, 0);
-                       reg1 = sky2_pci_read32(hw, PCI_DEV_REG4);
-                       reg1 &= P_ASPM_CONTROL_MSK;
-                       sky2_pci_write32(hw, PCI_DEV_REG4, reg1);
-                       sky2_pci_write32(hw, PCI_DEV_REG5, 0);
-               }
+       if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1)
+               /* enable bits are inverted */
+               sky2_write8(hw, B2_Y2_CLK_GATE,
+                           Y2_PCI_CLK_LNK1_DIS | Y2_COR_CLK_LNK1_DIS |
+                           Y2_CLK_GAT_LNK1_DIS | Y2_PCI_CLK_LNK2_DIS |
+                           Y2_COR_CLK_LNK2_DIS | Y2_CLK_GAT_LNK2_DIS);
+       else
+               sky2_write8(hw, B2_Y2_CLK_GATE, 0);
 
-               break;
+       if (hw->chip_id == CHIP_ID_YUKON_EC_U) {
+               u32 reg1;
 
-       case PCI_D3hot:
-       case PCI_D3cold:
-               if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1)
-                       sky2_write8(hw, B2_Y2_CLK_GATE, 0);
-               else
-                       /* enable bits are inverted */
-                       sky2_write8(hw, B2_Y2_CLK_GATE,
-                                   Y2_PCI_CLK_LNK1_DIS | Y2_COR_CLK_LNK1_DIS |
-                                   Y2_CLK_GAT_LNK1_DIS | Y2_PCI_CLK_LNK2_DIS |
-                                   Y2_COR_CLK_LNK2_DIS | Y2_CLK_GAT_LNK2_DIS);
-
-               /* switch power to VAUX */
-               if (vaux && state != PCI_D3cold)
-                       sky2_write8(hw, B0_POWER_CTRL,
-                                   (PC_VAUX_ENA | PC_VCC_ENA |
-                                    PC_VAUX_ON | PC_VCC_OFF));
-               break;
-       default:
-               printk(KERN_ERR PFX "Unknown power state %d\n", state);
+               sky2_pci_write32(hw, PCI_DEV_REG3, 0);
+               reg1 = sky2_pci_read32(hw, PCI_DEV_REG4);
+               reg1 &= P_ASPM_CONTROL_MSK;
+               sky2_pci_write32(hw, PCI_DEV_REG4, reg1);
+               sky2_pci_write32(hw, PCI_DEV_REG5, 0);
        }
+}
 
-       sky2_pci_write16(hw, hw->pm_cap + PCI_PM_CTRL, power_control);
-       sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
+static void sky2_power_aux(struct sky2_hw *hw)
+{
+       if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1)
+               sky2_write8(hw, B2_Y2_CLK_GATE, 0);
+       else
+               /* enable bits are inverted */
+               sky2_write8(hw, B2_Y2_CLK_GATE,
+                           Y2_PCI_CLK_LNK1_DIS | Y2_COR_CLK_LNK1_DIS |
+                           Y2_CLK_GAT_LNK1_DIS | Y2_PCI_CLK_LNK2_DIS |
+                           Y2_COR_CLK_LNK2_DIS | Y2_CLK_GAT_LNK2_DIS);
+
+       /* switch power to VAUX */
+       if (sky2_read16(hw, B0_CTST) & Y2_VAUX_AVAIL)
+               sky2_write8(hw, B0_POWER_CTRL,
+                           (PC_VAUX_ENA | PC_VCC_ENA |
+                            PC_VAUX_ON | PC_VCC_OFF));
 }
 
 static void sky2_gmac_reset(struct sky2_hw *hw, unsigned port)
@@ -2480,7 +2456,7 @@ static int sky2_reset(struct sky2_hw *hw)
                        ++hw->ports;
        }
 
-       sky2_set_power_state(hw, PCI_D0);
+       sky2_power_on(hw);
 
        for (i = 0; i < hw->ports; i++) {
                sky2_write8(hw, SK_REG(i, GMAC_LINK_CTRL), GMLC_RST_SET);
@@ -3376,7 +3352,7 @@ static int __devinit sky2_probe(struct pci_dev *pdev,
 {
        struct net_device *dev, *dev1 = NULL;
        struct sky2_hw *hw;
-       int err, pm_cap, using_dac = 0;
+       int err, using_dac = 0;
 
        err = pci_enable_device(pdev);
        if (err) {
@@ -3394,15 +3370,6 @@ static int __devinit sky2_probe(struct pci_dev *pdev,
 
        pci_set_master(pdev);
 
-       /* Find power-management capability. */
-       pm_cap = pci_find_capability(pdev, PCI_CAP_ID_PM);
-       if (pm_cap == 0) {
-               printk(KERN_ERR PFX "Cannot find PowerManagement capability, "
-                      "aborting.\n");
-               err = -EIO;
-               goto err_out_free_regions;
-       }
-
        if (sizeof(dma_addr_t) > sizeof(u32) &&
            !(err = pci_set_dma_mask(pdev, DMA_64BIT_MASK))) {
                using_dac = 1;
@@ -3438,7 +3405,6 @@ static int __devinit sky2_probe(struct pci_dev *pdev,
                       pci_name(pdev));
                goto err_out_free_hw;
        }
-       hw->pm_cap = pm_cap;
 
 #ifdef __BIG_ENDIAN
        /* The sk98lin vendor driver uses hardware byte swapping but
@@ -3555,7 +3521,8 @@ static void __devexit sky2_remove(struct pci_dev *pdev)
                unregister_netdev(dev1);
        unregister_netdev(dev0);
 
-       sky2_set_power_state(hw, PCI_D3hot);
+       sky2_power_aux(hw);
+
        sky2_write16(hw, B0_Y2LED, LED_STAT_OFF);
        sky2_write8(hw, B0_CTST, CS_RST_SET);
        sky2_read8(hw, B0_CTST);
@@ -3581,10 +3548,6 @@ static int sky2_suspend(struct pci_dev *pdev, pm_message_t state)
 {
        struct sky2_hw *hw = pci_get_drvdata(pdev);
        int i;
-       pci_power_t pstate = pci_choose_state(pdev, state);
-
-       if (!(pstate == PCI_D3hot || pstate == PCI_D3cold))
-               return -EINVAL;
 
        del_timer_sync(&hw->idle_timer);
        netif_poll_disable(hw->dev[0]);
@@ -3599,8 +3562,10 @@ static int sky2_suspend(struct pci_dev *pdev, pm_message_t state)
        }
 
        sky2_write32(hw, B0_IMSK, 0);
+       sky2_power_aux(hw);
        pci_save_state(pdev);
-       sky2_set_power_state(hw, pstate);
+       pci_set_power_state(pdev, pci_choose_state(pdev, state));
+
        return 0;
 }
 
@@ -3609,9 +3574,15 @@ static int sky2_resume(struct pci_dev *pdev)
        struct sky2_hw *hw = pci_get_drvdata(pdev);
        int i, err;
 
-       pci_restore_state(pdev);
+       err = pci_set_power_state(pdev, PCI_D0);
+       if (err)
+               goto out;
+
+       err = pci_restore_state(pdev);
+       if (err)
+               goto out;
+
        pci_enable_wake(pdev, PCI_D0, 0);
-       sky2_set_power_state(hw, PCI_D0);
 
        err = sky2_reset(hw);
        if (err)
@@ -3636,7 +3607,10 @@ static int sky2_resume(struct pci_dev *pdev)
 
        netif_poll_enable(hw->dev[0]);
        sky2_idle_start(hw);
+       return 0;
 out:
+       printk(KERN_ERR PFX "%s: resume failed (%d)\n", pci_name(pdev), err);
+       pci_disable_device(pdev);
        return err;
 }
 #endif

diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h
index 6ed1d47dbbd3452bfa0460fb6b92df67c8370f5f..1f56600aad86bfdfb6864b24ee9f55e5deaeca3a 100644 (file)
--- a/drivers/net/sky2.h
+++ b/drivers/net/sky2.h
@@ -1887,7 +1887,6 @@ struct sky2_hw {
        struct pci_dev       *pdev;
        struct net_device    *dev[2];
 
-       int                  pm_cap;
        u8                   chip_id;
        u8                   chip_rev;
        u8                   pmd_type;