+++ /dev/null
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify *
- * it under the terms of the GNU General Public License as published by *
- * the Free Software Foundation; either version 2 of the License, or *
- * (at your option) any later version. *
- * *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
- * GNU General Public License for more details. *
- * *
- * You should have received a copy of the GNU General Public License *
- * along with this program; if not, write to the *
- * Free Software Foundation, Inc., *
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
- * *
- *************************************************************************
- */
-
-#include "rt_config.h"
-
-#ifdef RALINK_ATE
-UCHAR TemplateFrame[24] = {0x08/* Data type */,0x00,0x00,0x00,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x00,0xAA,0xBB,0x12,0x34,0x56,0x00,0x11,0x22,0xAA,0xBB,0xCC,0x00,0x00}; // 802.11 MAC Header, Type:Data, Length:24bytes
-extern RTMP_RF_REGS RF2850RegTable[];
-extern UCHAR NUM_OF_2850_CHNL;
-
-#ifdef RT2870
-extern UCHAR EpToQueue[];
-extern VOID RTUSBRejectPendingPackets( IN PRTMP_ADAPTER pAd);
-#endif // RT2870 //
-
-static CHAR CCKRateTable[] = {0, 1, 2, 3, 8, 9, 10, 11, -1}; /* CCK Mode. */
-static CHAR OFDMRateTable[] = {0, 1, 2, 3, 4, 5, 6, 7, -1}; /* OFDM Mode. */
-static CHAR HTMIXRateTable[] = {0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, -1}; /* HT Mix Mode. */
-
-static INT TxDmaBusy(
- IN PRTMP_ADAPTER pAd);
-
-static INT RxDmaBusy(
- IN PRTMP_ADAPTER pAd);
-
-static VOID RtmpDmaEnable(
- IN PRTMP_ADAPTER pAd,
- IN INT Enable);
-
-static VOID BbpSoftReset(
- IN PRTMP_ADAPTER pAd);
-
-static VOID RtmpRfIoWrite(
- IN PRTMP_ADAPTER pAd);
-
-static INT ATESetUpFrame(
- IN PRTMP_ADAPTER pAd,
- IN UINT32 TxIdx);
-
-static INT ATETxPwrHandler(
- IN PRTMP_ADAPTER pAd,
- IN char index);
-
-static INT ATECmdHandler(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg);
-
-static int CheckMCSValid(
- IN UCHAR Mode,
- IN UCHAR Mcs);
-
-
-#ifdef RT2870
-static VOID ATEWriteTxInfo(
- IN PRTMP_ADAPTER pAd,
- IN PTXINFO_STRUC pTxInfo,
- IN USHORT USBDMApktLen,
- IN BOOLEAN bWiv,
- IN UCHAR QueueSel,
- IN UCHAR NextValid,
- IN UCHAR TxBurst);
-
-static VOID ATEWriteTxWI(
- IN PRTMP_ADAPTER pAd,
- IN PTXWI_STRUC pTxWI,
- IN BOOLEAN FRAG,
- IN BOOLEAN InsTimestamp,
- IN BOOLEAN AMPDU,
- IN BOOLEAN Ack,
- IN BOOLEAN NSeq, // HW new a sequence.
- IN UCHAR BASize,
- IN UCHAR WCID,
- IN ULONG Length,
- IN UCHAR PID,
- IN UCHAR MIMOps,
- IN UCHAR Txopmode,
- IN BOOLEAN CfAck,
- IN HTTRANSMIT_SETTING Transmit);
-
-#endif // RT2870 //
-
-static VOID SetJapanFilter(
- IN PRTMP_ADAPTER pAd);
-
-/*=========================end of prototype=========================*/
-
-
-#ifdef RT2870
-static INT TxDmaBusy(
- IN PRTMP_ADAPTER pAd)
-{
- INT result;
- USB_DMA_CFG_STRUC UsbCfg;
-
- RTMP_IO_READ32(pAd, USB_DMA_CFG, &UsbCfg.word); // disable DMA
- if (UsbCfg.field.TxBusy)
- result = 1;
- else
- result = 0;
-
- return result;
-}
-
-static INT RxDmaBusy(
- IN PRTMP_ADAPTER pAd)
-{
- INT result;
- USB_DMA_CFG_STRUC UsbCfg;
-
- RTMP_IO_READ32(pAd, USB_DMA_CFG, &UsbCfg.word); // disable DMA
- if (UsbCfg.field.RxBusy)
- result = 1;
- else
- result = 0;
-
- return result;
-}
-
-static VOID RtmpDmaEnable(
- IN PRTMP_ADAPTER pAd,
- IN INT Enable)
-{
- BOOLEAN value;
- ULONG WaitCnt;
- USB_DMA_CFG_STRUC UsbCfg;
-
- value = Enable > 0 ? 1 : 0;
-
- // check DMA is in busy mode.
- WaitCnt = 0;
- while (TxDmaBusy(pAd) || RxDmaBusy(pAd))
- {
- RTMPusecDelay(10);
- if (WaitCnt++ > 100)
- break;
- }
-
- //Why not to clear USB DMA TX path first ???
- RTMP_IO_READ32(pAd, USB_DMA_CFG, &UsbCfg.word); // disable DMA
- UsbCfg.field.TxBulkEn = value;
- UsbCfg.field.RxBulkEn = value;
- RTMP_IO_WRITE32(pAd, USB_DMA_CFG, UsbCfg.word); // abort all TX rings
- RTMPusecDelay(5000);
-
- return;
-}
-#endif // RT2870 //
-
-static VOID BbpSoftReset(
- IN PRTMP_ADAPTER pAd)
-{
- UCHAR BbpData = 0;
-
- // Soft reset, set BBP R21 bit0=1->0
- ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R21, &BbpData);
- BbpData |= 0x00000001; //set bit0=1
- ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R21, BbpData);
-
- ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R21, &BbpData);
- BbpData &= ~(0x00000001); //set bit0=0
- ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R21, BbpData);
-
- return;
-}
-
-static VOID RtmpRfIoWrite(
- IN PRTMP_ADAPTER pAd)
-{
- // Set RF value 1's set R3[bit2] = [0]
- RTMP_RF_IO_WRITE32(pAd, pAd->LatchRfRegs.R1);
- RTMP_RF_IO_WRITE32(pAd, pAd->LatchRfRegs.R2);
- RTMP_RF_IO_WRITE32(pAd, (pAd->LatchRfRegs.R3 & (~0x04)));
- RTMP_RF_IO_WRITE32(pAd, pAd->LatchRfRegs.R4);
-
- RTMPusecDelay(200);
-
- // Set RF value 2's set R3[bit2] = [1]
- RTMP_RF_IO_WRITE32(pAd, pAd->LatchRfRegs.R1);
- RTMP_RF_IO_WRITE32(pAd, pAd->LatchRfRegs.R2);
- RTMP_RF_IO_WRITE32(pAd, (pAd->LatchRfRegs.R3 | 0x04));
- RTMP_RF_IO_WRITE32(pAd, pAd->LatchRfRegs.R4);
-
- RTMPusecDelay(200);
-
- // Set RF value 3's set R3[bit2] = [0]
- RTMP_RF_IO_WRITE32(pAd, pAd->LatchRfRegs.R1);
- RTMP_RF_IO_WRITE32(pAd, pAd->LatchRfRegs.R2);
- RTMP_RF_IO_WRITE32(pAd, (pAd->LatchRfRegs.R3 & (~0x04)));
- RTMP_RF_IO_WRITE32(pAd, pAd->LatchRfRegs.R4);
-
- return;
-}
-
-static int CheckMCSValid(
- UCHAR Mode,
- UCHAR Mcs)
-{
- int i;
- PCHAR pRateTab;
-
- switch(Mode)
- {
- case 0:
- pRateTab = CCKRateTable;
- break;
- case 1:
- pRateTab = OFDMRateTable;
- break;
- case 2:
- case 3:
- pRateTab = HTMIXRateTable;
- break;
- default:
- ATEDBGPRINT(RT_DEBUG_ERROR, ("unrecognizable Tx Mode %d\n", Mode));
- return -1;
- break;
- }
-
- i = 0;
- while(pRateTab[i] != -1)
- {
- if (pRateTab[i] == Mcs)
- return 0;
- i++;
- }
-
- return -1;
-}
-
-#if 1
-static INT ATETxPwrHandler(
- IN PRTMP_ADAPTER pAd,
- IN char index)
-{
- ULONG R;
- CHAR TxPower;
- UCHAR Bbp94 = 0;
- BOOLEAN bPowerReduce = FALSE;
-
-#ifdef RALINK_28xx_QA
- if ((pAd->ate.bQATxStart == TRUE) || (pAd->ate.bQARxStart == TRUE))
- {
- /* When QA is used for Tx, pAd->ate.TxPower0/1 and real tx power
- ** are not synchronized.
- */
-/*
- pAd->ate.TxPower0 = pAd->LatchRfRegs.xxx;
- pAd->ate.TxPower1 = pAd->LatchRfRegs.xxx;
-*/
- return 0;
- }
- else
-#endif // RALINK_28xx_QA //
- {
- TxPower = index == 0 ? pAd->ate.TxPower0 : pAd->ate.TxPower1;
-
- if (pAd->ate.Channel <= 14)
- {
- if (TxPower > 31)
- {
- //
- // R3, R4 can't large than 31 (0x24), 31 ~ 36 used by BBP 94
- //
- R = 31;
- if (TxPower <= 36)
- Bbp94 = BBPR94_DEFAULT + (UCHAR)(TxPower - 31);
- }
- else if (TxPower < 0)
- {
- //
- // R3, R4 can't less than 0, -1 ~ -6 used by BBP 94
- //
- R = 0;
- if (TxPower >= -6)
- Bbp94 = BBPR94_DEFAULT + TxPower;
- }
- else
- {
- // 0 ~ 31
- R = (ULONG) TxPower;
- Bbp94 = BBPR94_DEFAULT;
- }
-
- ATEDBGPRINT(RT_DEBUG_TRACE, ("%s (TxPower=%d, R=%ld, BBP_R94=%d)\n", __func__, TxPower, R, Bbp94));
- }
- else// 5.5 GHz
- {
- if (TxPower > 15)
- {
- //
- // R3, R4 can't large than 15 (0x0F)
- //
- R = 15;
- }
- else if (TxPower < 0)
- {
- //
- // R3, R4 can't less than 0
- //
- // -1 ~ -7
- ASSERT((TxPower >= -7));
- R = (ULONG)(TxPower + 7);
- bPowerReduce = TRUE;
- }
- else
- {
- // 0 ~ 15
- R = (ULONG) TxPower;
- }
-
- ATEDBGPRINT(RT_DEBUG_TRACE, ("%s (TxPower=%d, R=%lu)\n", __func__, TxPower, R));
- }
-
- if (pAd->ate.Channel <= 14)
- {
- if (index == 0)
- {
- R = R << 9; // shift TX power control to correct RF(R3) register bit position
- R |= (pAd->LatchRfRegs.R3 & 0xffffc1ff);
- pAd->LatchRfRegs.R3 = R;
- }
- else
- {
- R = R << 6; // shift TX power control to correct RF(R4) register bit position
- R |= (pAd->LatchRfRegs.R4 & 0xfffff83f);
- pAd->LatchRfRegs.R4 = R;
- }
- }
- else// 5.5GHz
- {
- if (bPowerReduce == FALSE)
- {
- if (index == 0)
- {
- R = (R << 10) | (1 << 9); // shift TX power control to correct RF(R3) register bit position
- R |= (pAd->LatchRfRegs.R3 & 0xffffc1ff);
- pAd->LatchRfRegs.R3 = R;
- }
- else
- {
- R = (R << 7) | (1 << 6); // shift TX power control to correct RF(R4) register bit position
- R |= (pAd->LatchRfRegs.R4 & 0xfffff83f);
- pAd->LatchRfRegs.R4 = R;
- }
- }
- else
- {
- if (index == 0)
- {
- R = (R << 10); // shift TX power control to correct RF(R3) register bit position
- R |= (pAd->LatchRfRegs.R3 & 0xffffc1ff);
-
- /* Clear bit 9 of R3 to reduce 7dB. */
- pAd->LatchRfRegs.R3 = (R & (~(1 << 9)));
- }
- else
- {
- R = (R << 7); // shift TX power control to correct RF(R4) register bit position
- R |= (pAd->LatchRfRegs.R4 & 0xfffff83f);
-
- /* Clear bit 6 of R4 to reduce 7dB. */
- pAd->LatchRfRegs.R4 = (R & (~(1 << 6)));
- }
- }
- }
-
- RtmpRfIoWrite(pAd);
-
- return 0;
- }
-}
-#else// 1 //
-static INT ATETxPwrHandler(
- IN PRTMP_ADAPTER pAd,
- IN char index)
-{
- ULONG R;
- CHAR TxPower;
- UCHAR Bbp94 = 0;
-
-#ifdef RALINK_28xx_QA
- if ((pAd->ate.bQATxStart == TRUE) || (pAd->ate.bQARxStart == TRUE))
- {
- // TODO: how to get current TxPower0/1 from pAd->LatchRfRegs ?
- /* When QA is used for Tx, pAd->ate.TxPower0/1 and real tx power
- ** are not synchronized.
- */
-/*
- pAd->ate.TxPower0 = pAd->LatchRfRegs.xxx;
- pAd->ate.TxPower1 = pAd->LatchRfRegs.xxx;
-*/
- return 0;
- }
- else
-#endif // RALINK_28xx_QA //
- {
- TxPower = index == 0 ? pAd->ate.TxPower0 : pAd->ate.TxPower1;
-
- if (TxPower > 31)
- {
- //
- // R3, R4 can't large than 36 (0x24), 31 ~ 36 used by BBP 94
- //
- R = 31;
- if (TxPower <= 36)
- Bbp94 = BBPR94_DEFAULT + (UCHAR)(TxPower - 31);
- }
- else if (TxPower < 0)
- {
- //
- // R3, R4 can't less than 0, -1 ~ -6 used by BBP 94
- //
- R = 0;
- if (TxPower >= -6)
- Bbp94 = BBPR94_DEFAULT + TxPower;
- }
- else
- {
- // 0 ~ 31
- R = (ULONG) TxPower;
- Bbp94 = BBPR94_DEFAULT;
- }
-
- ATEDBGPRINT(RT_DEBUG_TRACE, ("%s (TxPower=%d, R3=%ld, BBP_R94=%d)\n", __func__, TxPower, R, Bbp94));
-
- if (pAd->ate.Channel <= 14)
- {
- if (index == 0)
- {
- R = R << 9; // shift TX power control to correct RF(R3) register bit position
- R |= (pAd->LatchRfRegs.R3 & 0xffffc1ff);
- pAd->LatchRfRegs.R3 = R;
- }
- else
- {
- R = R << 6; // shift TX power control to correct RF(R4) register bit position
- R |= (pAd->LatchRfRegs.R4 & 0xfffff83f);
- pAd->LatchRfRegs.R4 = R;
- }
- }
- else
- {
- if (index == 0)
- {
- R = (R << 10) | (1 << 9); // shift TX power control to correct RF(R3) register bit position
- R |= (pAd->LatchRfRegs.R3 & 0xffffc1ff);
- pAd->LatchRfRegs.R3 = R;
- }
- else
- {
- R = (R << 7) | (1 << 6); // shift TX power control to correct RF(R4) register bit position
- R |= (pAd->LatchRfRegs.R4 & 0xfffff83f);
- pAd->LatchRfRegs.R4 = R;
- }
- }
-
- RtmpRfIoWrite(pAd);
-
- return 0;
- }
-}
-#endif // 1 //
-/*
- ==========================================================================
- Description:
- Set ATE operation mode to
- 0. ATESTART = Start ATE Mode
- 1. ATESTOP = Stop ATE Mode
- 2. TXCONT = Continuous Transmit
- 3. TXCARR = Transmit Carrier
- 4. TXFRAME = Transmit Frames
- 5. RXFRAME = Receive Frames
-#ifdef RALINK_28xx_QA
- 6. TXSTOP = Stop Any Type of Transmition
- 7. RXSTOP = Stop Receiving Frames
-#endif // RALINK_28xx_QA //
- Return:
- TRUE if all parameters are OK, FALSE otherwise
- ==========================================================================
-*/
-/* */
-/* */
-/*=======================End of RT2860=======================*/
-
-
-/*======================Start of RT2870======================*/
-/* */
-/* */
-
-#ifdef RT2870
-static INT ATECmdHandler(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg)
-{
- UINT32 Value;
- UCHAR BbpData;
- UINT32 MacData;
- UINT i=0, atemode;
- //NDIS_STATUS Status = NDIS_STATUS_SUCCESS;
- //PUCHAR pDest;
- UINT32 temp;
- ULONG IrqFlags;
-
- ATEDBGPRINT(RT_DEBUG_TRACE, ("===> ATECmdHandler()\n"));
- ATEAsicSwitchChannel(pAd);
- /* AsicLockChannel() is empty function so far in fact */
- AsicLockChannel(pAd, pAd->ate.Channel);
-
- RTMPusecDelay(5000);
-
- // Default value in BBP R22 is 0x0.
- BbpData = 0;
-
- /* Enter ATE mode and set Tx/Rx Idle */
- if (!strcmp(arg, "ATESTART"))
- {
-#ifdef CONFIG_STA_SUPPORT
- BOOLEAN Cancelled;
-#endif // CONFIG_STA_SUPPORT //
- ATEDBGPRINT(RT_DEBUG_TRACE, ("ATE: ATESTART\n"));
-
- netif_stop_queue(pAd->net_dev);
-
- atemode = pAd->ate.Mode;
- pAd->ate.Mode = ATE_START;
-// pAd->ate.TxDoneCount = pAd->ate.TxCount;
- // Disable Rx
- RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
- Value &= ~(1 << 3);
- RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
-
- // Disable auto responder
- RTMP_IO_READ32(pAd, AUTO_RSP_CFG, &temp);
- temp = temp & 0xFFFFFFFE;
- RTMP_IO_WRITE32(pAd, AUTO_RSP_CFG, temp);
-
- // read MAC_SYS_CTRL and backup MAC_SYS_CTRL value.
- RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &MacData);
- // clean bit4 to stop continuous Tx production test.
- MacData &= 0xFFFFFFEF;
- // Stop continuous TX production test.
- RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, MacData);//disable or cancel pending irp first ???
-
- if (atemode & ATE_TXCARR)
- {
- // No Carrier Test set BBP R22 bit7=0, bit6=0, bit[5~0]=0x0
- ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R22, &BbpData);
- BbpData &= 0xFFFFFF00; //clear bit7, bit6, bit[5~0]
- ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R22, BbpData);
- }
- else if (atemode & ATE_TXCARRSUPP)
- {
- // No Cont. TX set BBP R22 bit7=0
- ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R22, &BbpData);
- BbpData &= ~(1 << 7); //set bit7=0
- ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R22, BbpData);
-
- // No Carrier Suppression set BBP R24 bit0=0
- ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R24, &BbpData);
- BbpData &= 0xFFFFFFFE; //clear bit0
- ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R24, BbpData);
- }
- // We should free some resource which allocate when ATE_TXFRAME , ATE_STOP, and ATE_TXCONT.
- // TODO:Should we free some resource which was allocated when LoopBack and ATE_STOP ?
- else if ((atemode & ATE_TXFRAME) || (atemode == ATE_STOP))
- {
- if (atemode & ATE_TXCONT)
- {
- // Not Cont. TX anymore, so set BBP R22 bit7=0
- ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R22, &BbpData);
- BbpData &= ~(1 << 7); //set bit7=0
- ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R22, BbpData);
- }
- // Abort Tx, Rx DMA.
- RtmpDmaEnable(pAd, 0);
-
- {
- // It seems nothing to free,
- // because we didn't allocate any resource when we entered ATE_TXFRAME mode latestly.
- }
-
- // Start Tx, RX DMA
- RtmpDmaEnable(pAd, 1);
- }
-
- RTUSBRejectPendingPackets(pAd);
- RTUSBCleanUpDataBulkOutQueue(pAd);
-
-#ifdef CONFIG_STA_SUPPORT
- //
- // It will be called in MlmeSuspend().
- //
- // Cancel pending timers
- RTMPCancelTimer(&pAd->MlmeAux.AssocTimer, &Cancelled);
- RTMPCancelTimer(&pAd->MlmeAux.ReassocTimer, &Cancelled);
- RTMPCancelTimer(&pAd->MlmeAux.DisassocTimer, &Cancelled);
- RTMPCancelTimer(&pAd->MlmeAux.AuthTimer, &Cancelled);
- RTMPCancelTimer(&pAd->MlmeAux.BeaconTimer, &Cancelled);
- RTMPCancelTimer(&pAd->MlmeAux.ScanTimer, &Cancelled);
-#endif // CONFIG_STA_SUPPORT //
-
- //RTUSBCleanUpMLMEWaitQueue(pAd); /* not used in RT28xx */
- RTUSBCleanUpMLMEBulkOutQueue(pAd);
-
- // Sometimes kernel will hang on, so we avoid calling MlmeSuspend().
-// MlmeSuspend(pAd, TRUE);
- //RTMPCancelTimer(&pAd->Mlme.PeriodicTimer, &Cancelled);
-
- // Disable Rx
- RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
- Value &= ~(1 << 3);
- RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
-
- // Abort Tx, RX DMA.
- RtmpDmaEnable(pAd, 0);
-
- // Disable Tx
- RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
- Value &= ~(1 << 2);
- RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
-
- // Make sure there are no pending bulk in/out IRPs before we go on.
-/*=========================================================================*/
- /* pAd->PendingRx is not of type atomic_t anymore in 28xx */
-// while ((atomic_read(&pAd->PendingRx) > 0)) //pAd->BulkFlags != 0 wait bulk out finish
- while ((pAd->PendingRx > 0)) //pAd->BulkFlags != 0 wait bulk out finish
- {
-#if 1
- ATE_RTUSBCancelPendingBulkInIRP(pAd);
-#else
- NdisInterlockedDecrement(&pAd->PendingRx);
-#endif
- /* delay 0.5 seconds */
- RTMPusecDelay(500000);
- pAd->PendingRx = 0;
- }
- /* peter : why don't we have to get BulkOutLock first ? */
- while (((pAd->BulkOutPending[0] == TRUE) ||
- (pAd->BulkOutPending[1] == TRUE) ||
- (pAd->BulkOutPending[2] == TRUE) ||
- (pAd->BulkOutPending[3] == TRUE)) && (pAd->BulkFlags != 0)) //pAd->BulkFlags != 0 wait bulk out finish
- {
- do
- {
- /* pAd->BulkOutPending[y] will be set to FALSE in RTUSBCancelPendingBulkOutIRP(pAd) */
- RTUSBCancelPendingBulkOutIRP(pAd);
- } while (FALSE);
-
- /* we have enough time delay in RTUSBCancelPendingBulkOutIRP(pAd)
- ** so this is not necessary
- */
-// RTMPusecDelay(500000);
- }
-
- /* pAd->PendingRx is not of type atomic_t anymore in 28xx */
-// ASSERT(atomic_read(&pAd->PendingRx) == 0);
- ASSERT(pAd->PendingRx == 0);
-/*=========================================================================*/
-
- // reset Rx statistics.
- pAd->ate.LastSNR0 = 0;
- pAd->ate.LastSNR1 = 0;
- pAd->ate.LastRssi0 = 0;
- pAd->ate.LastRssi1 = 0;
- pAd->ate.LastRssi2 = 0;
- pAd->ate.AvgRssi0 = 0;
- pAd->ate.AvgRssi1 = 0;
- pAd->ate.AvgRssi2 = 0;
- pAd->ate.AvgRssi0X8 = 0;
- pAd->ate.AvgRssi1X8 = 0;
- pAd->ate.AvgRssi2X8 = 0;
- pAd->ate.NumOfAvgRssiSample = 0;
-
-#ifdef RALINK_28xx_QA
- // Tx frame
- pAd->ate.bQATxStart = FALSE;
- pAd->ate.bQARxStart = FALSE;
- pAd->ate.seq = 0;
-
- // counters
- pAd->ate.U2M = 0;
- pAd->ate.OtherData = 0;
- pAd->ate.Beacon = 0;
- pAd->ate.OtherCount = 0;
- pAd->ate.TxAc0 = 0;
- pAd->ate.TxAc1 = 0;
- pAd->ate.TxAc2 = 0;
- pAd->ate.TxAc3 = 0;
- pAd->ate.TxHCCA = 0;
- pAd->ate.TxMgmt = 0;
- pAd->ate.RSSI0 = 0;
- pAd->ate.RSSI1 = 0;
- pAd->ate.RSSI2 = 0;
- pAd->ate.SNR0 = 0;
- pAd->ate.SNR1 = 0;
-
- // control
- pAd->ate.TxDoneCount = 0;
- pAd->ate.TxStatus = 0; // task Tx status // 0 --> task is idle, 1 --> task is running
-#endif // RALINK_28xx_QA //
-
- // Soft reset BBP.
- BbpSoftReset(pAd);
-
-
-#ifdef CONFIG_STA_SUPPORT
- AsicDisableSync(pAd);
-
- /*
- ** If we skip "LinkDown()", we should disable protection
- ** to prevent from sending out RTS or CTS-to-self.
- */
- ATEDisableAsicProtect(pAd);
- RTMPStationStop(pAd);
-#endif // CONFIG_STA_SUPPORT //
-
- // Default value in BBP R22 is 0x0.
- BbpData = 0;
- RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &MacData);
-
- // Clean bit4 to stop continuous Tx production test.
- MacData &= 0xFFFFFFEF;
- ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R22, BbpData);
- RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, MacData);
- //Clean ATE Bulk in/out counter and continue setup
- InterlockedExchange(&pAd->BulkOutRemained, 0);
-
- /* NdisAcquireSpinLock()/NdisReleaseSpinLock() need only one argument in RT28xx */
- NdisAcquireSpinLock(&pAd->GenericLock);
- pAd->ContinBulkOut = FALSE;
- pAd->ContinBulkIn = FALSE;
- NdisReleaseSpinLock(&pAd->GenericLock);
-
- RTUSB_CLEAR_BULK_FLAG(pAd, fRTUSB_BULK_OUT_DATA_ATE);
- }
- else if (!strcmp(arg, "ATESTOP"))
- {
- ATEDBGPRINT(RT_DEBUG_TRACE, ("ATE : ATESTOP ===>\n"));
-
- // Default value in BBP R22 is 0x0.
- BbpData = 0;
- RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &MacData);//0820
- // Clean bit4 to stop continuous Tx production test.
- MacData &= 0xFFFFFFEF;
- ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R22, BbpData);
- RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, MacData); // recover the MAC_SYS_CTRL register back.
-
- // Disable Rx
- RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
- Value &= ~(1 << 3);
- RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
-
- /*
- ** Abort Tx, RX DMA.
- ** Q : How to do the following I/O if Tx, Rx DMA is aborted ?
- ** Ans : Bulk endpoints are aborted, while the control endpoint is not.
- */
- RtmpDmaEnable(pAd, 0);
-
- // Disable Tx
- RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
- Value &= ~(1 << 2);
- RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
-
- /* Make sure there are no pending bulk in/out IRPs before we go on. */
-/*=========================================================================*/
-// while ((atomic_read(&pAd->PendingRx) > 0)) //pAd->BulkFlags != 0 wait bulk out finish
- while (pAd->PendingRx > 0)
- {
-#if 1
- ATE_RTUSBCancelPendingBulkInIRP(pAd);
-#else
-// NdisInterlockedDecrement(&pAd->PendingRx);
- pAd->PendingRx--;
-#endif
- RTMPusecDelay(500000);
- }
-
- while (((pAd->BulkOutPending[0] == TRUE) ||
- (pAd->BulkOutPending[1] == TRUE) ||
- (pAd->BulkOutPending[2] == TRUE) ||
- (pAd->BulkOutPending[3] == TRUE)) && (pAd->BulkFlags != 0)) //pAd->BulkFlags != 0 wait bulk out finish
- {
- do
- {
- RTUSBCancelPendingBulkOutIRP(pAd);
- } while (FALSE);
-
- RTMPusecDelay(500000);
- }
-
-// ASSERT(atomic_read(&pAd->PendingRx) == 0);
- ASSERT(pAd->PendingRx == 0);
-/*=========================================================================*/
-/* Reset Rx RING */
-/*=========================================================================*/
-// InterlockedExchange(&pAd->PendingRx, 0);
- pAd->PendingRx = 0;
- pAd->NextRxBulkInReadIndex = 0; // Next Rx Read index
- pAd->NextRxBulkInIndex = RX_RING_SIZE - 1; // Rx Bulk pointer
- pAd->NextRxBulkInPosition = 0;
- for (i = 0; i < (RX_RING_SIZE); i++)
- {
- PRX_CONTEXT pRxContext = &(pAd->RxContext[i]);
- NdisZeroMemory(pRxContext->TransferBuffer, MAX_RXBULK_SIZE);
- /* peter : why don't we have to get BulkInLock first ? */
- pRxContext->pAd = pAd;
- pRxContext->pIrp = NULL;
- /* peter debug ++ */
- pRxContext->BulkInOffset = 0;
- pRxContext->bRxHandling = FALSE;
- /* peter debug -- */
- pRxContext->InUse = FALSE;
- pRxContext->IRPPending = FALSE;
- pRxContext->Readable = FALSE;
-// pRxContext->ReorderInUse = FALSE;
-// pRxContext->ReadPosOffset = 0;
- }
-
-/*=========================================================================*/
-/* Reset Tx RING */
-/*=========================================================================*/
- do
- {
- RTUSBCancelPendingBulkOutIRP(pAd);
- } while (FALSE);
-
-/*=========================================================================*/
- // Enable auto responder.
- RTMP_IO_READ32(pAd, AUTO_RSP_CFG, &temp);
- temp = temp | (0x01);
- RTMP_IO_WRITE32(pAd, AUTO_RSP_CFG, temp);
-
-/*================================================*/
- AsicEnableBssSync(pAd);
-
- /* Soft reset BBP.*/
- /* In 2870 chipset, ATE_BBP_IO_READ8_BY_REG_ID() == RTMP_BBP_IO_READ8_BY_REG_ID() */
- /* Both rt2870ap and rt2870sta use BbpSoftReset(pAd) to do BBP soft reset */
- BbpSoftReset(pAd);
-/*================================================*/
- {
-#ifdef CONFIG_STA_SUPPORT
- // Set all state machines back IDLE
- pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE;
- pAd->Mlme.AssocMachine.CurrState = ASSOC_IDLE;
- pAd->Mlme.AuthMachine.CurrState = AUTH_REQ_IDLE;
- pAd->Mlme.AuthRspMachine.CurrState = AUTH_RSP_IDLE;
- pAd->Mlme.SyncMachine.CurrState = SYNC_IDLE;
- pAd->Mlme.ActMachine.CurrState = ACT_IDLE;
-#endif // CONFIG_STA_SUPPORT //
-
- //
- // ===> refer to MlmeRestartStateMachine().
- // When we entered ATE_START mode, PeriodicTimer was not cancelled.
- // So we don't have to set it here.
- //
- //RTMPSetTimer(pAd, &pAd->Mlme.PeriodicTimer, MLME_TASK_EXEC_INTV);
-
- ASSERT(pAd->CommonCfg.Channel != 0);
-
- AsicSwitchChannel(pAd, pAd->CommonCfg.Channel, FALSE);
- AsicLockChannel(pAd, pAd->CommonCfg.Channel);
-
-
-#ifdef CONFIG_STA_SUPPORT
- RTMPStationStart(pAd);
-#endif // CONFIG_STA_SUPPORT //
- }
-//
-// These two steps have been done when entering ATE_STOP mode.
-//
-#if 0
- RTUSBWriteBBPRegister(pAd, BBP_R22, BbpData);
- RTUSBWriteMACRegister(pAd, MAC_SYS_CTRL, MacData);
-#endif
- // Clean ATE Bulk in/out counter and continue setup.
- InterlockedExchange(&pAd->BulkOutRemained, 0);
- NdisAcquireSpinLock(&pAd->GenericLock);
- pAd->ContinBulkOut = FALSE;
- pAd->ContinBulkIn = FALSE;
- NdisReleaseSpinLock(&pAd->GenericLock);
-
- /* Wait 50ms to prevent next URB to bulkout during HW reset. */
- /* todo : remove this if not necessary */
- NdisMSleep(50000);
-
- pAd->ate.Mode = ATE_STOP;
-
- // Enable Tx
- RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
- Value |= (1 << 2);
- RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
-
-/*=========================================================================*/
- /* restore RX_FILTR_CFG */
-#ifdef CONFIG_STA_SUPPORT
- /* restore RX_FILTR_CFG in order that QA maybe set it to 0x3 */
- RTMP_IO_WRITE32(pAd, RX_FILTR_CFG, STANORMAL);
-#endif // CONFIG_STA_SUPPORT //
-/*=========================================================================*/
-
- // Enable Tx, RX DMA.
- RtmpDmaEnable(pAd, 1);
-
- // Enable Rx
- RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
- Value |= (1 << 3);
- RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
-
- // Wait 10ms to wait all of the bulk-in URBs to complete.
- /* todo : remove this if not necessary */
- NdisMSleep(10000);
-
- // Everything is ready to start normal Tx/Rx.
- RTUSBBulkReceive(pAd);
- netif_start_queue(pAd->net_dev);
-
- ATEDBGPRINT(RT_DEBUG_TRACE, ("<=== ATE : ATESTOP \n"));
- }
- else if (!strcmp(arg, "TXCARR")) // Tx Carrier
- {
- ATEDBGPRINT(RT_DEBUG_TRACE, ("ATE: TXCARR\n"));
- pAd->ate.Mode |= ATE_TXCARR;
-
- // Disable Rx
- // May be we need not to do this, because these have been done in ATE_START mode ???
- RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
- Value &= ~(1 << 3);
- RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
-
- // QA has done the following steps if it is used.
- if (pAd->ate.bQATxStart == FALSE)
- {
- // Soft reset BBP.
- BbpSoftReset(pAd);
-
- // Carrier Test set BBP R22 bit7=1, bit6=1, bit[5~0]=0x01
- ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R22, &BbpData);
- BbpData &= 0xFFFFFF00; //clear bit7, bit6, bit[5~0]
- BbpData |= 0x000000C1; //set bit7=1, bit6=1, bit[5~0]=0x01
- ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R22, BbpData);
-
- // set MAC_SYS_CTRL(0x1004) Continuous Tx Production Test (bit4) = 1
- RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
- Value = Value | 0x00000010;
- RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
- }
- }
- else if (!strcmp(arg, "TXCONT")) // Tx Continue
- {
- if (pAd->ate.bQATxStart == TRUE)
- {
- /* set MAC_SYS_CTRL(0x1004) bit4(Continuous Tx Production Test)
- and bit2(MAC TX enable) back to zero. */
- RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &MacData);
- MacData &= 0xFFFFFFEB;
- RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, MacData);
-
- // set BBP R22 bit7=0
- ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R22, &BbpData);
- BbpData &= 0xFFFFFF7F; //set bit7=0
- ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R22, BbpData);
- }
-
- /* for TxCont mode.
- ** Step 1: Send 50 packets first then wait for a moment.
- ** Step 2: Send more 50 packet then start continue mode.
- */
- ATEDBGPRINT(RT_DEBUG_TRACE, ("ATE: TXCONT\n"));
- // Step 1: send 50 packets first.
- pAd->ate.Mode |= ATE_TXCONT;
- pAd->ate.TxCount = 50;
- pAd->ate.TxDoneCount = 0;
-
- // Soft reset BBP.
- BbpSoftReset(pAd);
-
- // Abort Tx, RX DMA.
- RtmpDmaEnable(pAd, 0);
-
-
- /* Only needed if we have to send some normal frames. */
- SetJapanFilter(pAd);
-
- // Setup frame format.
- ATESetUpFrame(pAd, 0);
-
- // Enable Tx
- RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
- Value |= (1 << 2);
- RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
-
- // Disable Rx
- RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
- Value &= ~(1 << 3);
- RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
-
- // Start Tx, RX DMA.
- RtmpDmaEnable(pAd, 1);
-
- InterlockedExchange(&pAd->BulkOutRemained, pAd->ate.TxCount);
-
-#ifdef RALINK_28xx_QA
- if (pAd->ate.bQATxStart == TRUE)
- {
- pAd->ate.TxStatus = 1;
- //pAd->ate.Repeat = 0;
- }
-#endif // RALINK_28xx_QA //
-
- NdisAcquireSpinLock(&pAd->GenericLock);//0820
- pAd->ContinBulkOut = FALSE;
- NdisReleaseSpinLock(&pAd->GenericLock);
-
- RTUSB_SET_BULK_FLAG(pAd, fRTUSB_BULK_OUT_DATA_ATE);
-
- // Kick bulk out
- RTUSBKickBulkOut(pAd);
-
- /* To make sure all the 50 frames have been bulk out before executing step 2 */
- while (atomic_read(&pAd->BulkOutRemained) > 0)
- {
- RTMPusecDelay(5000);
- }
-
- // Step 2: send more 50 packets then start continue mode.
- // Abort Tx, RX DMA.
- RtmpDmaEnable(pAd, 0);
-
- // Cont. TX set BBP R22 bit7=1
- ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R22, &BbpData);
- BbpData |= 0x00000080; //set bit7=1
- ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R22, BbpData);
-
- pAd->ate.TxCount = 50;
- pAd->ate.TxDoneCount = 0;
-
- SetJapanFilter(pAd);
-
- // Setup frame format.
- ATESetUpFrame(pAd, 0);
-
- // Enable Tx
- RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
- Value |= (1 << 2);
- RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
-
- // Disable Rx
- RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
- Value &= ~(1 << 3);
-
- // Start Tx, RX DMA.
- RtmpDmaEnable(pAd, 1);
-
- InterlockedExchange(&pAd->BulkOutRemained, pAd->ate.TxCount);
-
-#ifdef RALINK_28xx_QA
- if (pAd->ate.bQATxStart == TRUE)
- {
- pAd->ate.TxStatus = 1;
- //pAd->ate.Repeat = 0;
- }
-#endif // RALINK_28xx_QA //
-
- NdisAcquireSpinLock(&pAd->GenericLock);//0820
- pAd->ContinBulkOut = FALSE;
- NdisReleaseSpinLock(&pAd->GenericLock);
-
- RTUSB_SET_BULK_FLAG(pAd, fRTUSB_BULK_OUT_DATA_ATE);
- // Kick bulk out
- RTUSBKickBulkOut(pAd);
-
-#if 1
- RTMPusecDelay(500);
-#else
- while (atomic_read(&pAd->BulkOutRemained) > 0)
- {
- RTMPusecDelay(5000);
- }
-#endif // 1 //
-
- // Set MAC_SYS_CTRL(0x1004) Continuous Tx Production Test (bit4) = 1.
- RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &MacData);
- MacData |= 0x00000010;
- RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, MacData);
- }
- else if (!strcmp(arg, "TXFRAME")) // Tx Frames
- {
- ATEDBGPRINT(RT_DEBUG_TRACE, ("ATE: TXFRAME(Count=0x%08x)\n", pAd->ate.TxCount));
- pAd->ate.Mode |= ATE_TXFRAME;
-
- // Soft reset BBP.
- BbpSoftReset(pAd);
-
- // Default value in BBP R22 is 0x0.
- BbpData = 0;
-
- RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &MacData);
-
- // Clean bit4 to stop continuous Tx production test.
- MacData &= 0xFFFFFFEF;
-
- ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R22, BbpData);
- RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, MacData);
-
-#ifdef RALINK_28xx_QA
- // add this for LoopBack mode
- if (pAd->ate.bQARxStart == FALSE)
- {
- // Disable Rx
- RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
- Value &= ~(1 << 3);
- RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
- }
-
- if (pAd->ate.bQATxStart == TRUE)
- {
- pAd->ate.TxStatus = 1;
- //pAd->ate.Repeat = 0;
- }
-#else
- // Disable Rx
- RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
- Value &= ~(1 << 3);
- RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
-#endif // RALINK_28xx_QA //
-
- // Enable Tx
- RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
- Value |= (1 << 2);
- RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
-
- SetJapanFilter(pAd);
-
- // Abort Tx, RX DMA.
- RtmpDmaEnable(pAd, 0);
-
- pAd->ate.TxDoneCount = 0;
-
- // Setup frame format
- ATESetUpFrame(pAd, 0);
-
- // Start Tx, RX DMA.
- RtmpDmaEnable(pAd, 1);
-
- // Check count is continuous or not yet.
- //
- // Due to the type mismatch between "pAd->BulkOutRemained"(atomic_t) and "pAd->ate.TxCount"(UINT32)
- //
- if (pAd->ate.TxCount == 0)
- {
- InterlockedExchange(&pAd->BulkOutRemained, 0);
- }
- else
- {
- InterlockedExchange(&pAd->BulkOutRemained, pAd->ate.TxCount);
- }
- ATEDBGPRINT(RT_DEBUG_TRACE, ("bulk out count = %d\n", atomic_read(&pAd->BulkOutRemained)));
- ASSERT((atomic_read(&pAd->BulkOutRemained) >= 0));
-
- if (atomic_read(&pAd->BulkOutRemained) == 0)
- {
- ATEDBGPRINT(RT_DEBUG_TRACE, ("Send packet countinuously\n"));
-
- /* In 28xx, NdisAcquireSpinLock() == spin_lock_bh() */
- /* NdisAcquireSpinLock only need one argument in 28xx. */
- NdisAcquireSpinLock(&pAd->GenericLock);
- pAd->ContinBulkOut = TRUE;
- NdisReleaseSpinLock(&pAd->GenericLock);
-
- /* In 28xx, BULK_OUT_LOCK() == spin_lock_irqsave() */
- BULK_OUT_LOCK(&pAd->BulkOutLock[0], IrqFlags);// peter : NdisAcquireSpinLock ==> BULK_OUT_LOCK
- pAd->BulkOutPending[0] = FALSE;
- BULK_OUT_UNLOCK(&pAd->BulkOutLock[0], IrqFlags);// peter : NdisAcquireSpinLock ==> BULK_OUT_LOCK
- }
- else
- {
- ATEDBGPRINT(RT_DEBUG_TRACE, ("Send packets depend on counter\n"));
-
- NdisAcquireSpinLock(&pAd->GenericLock);
- pAd->ContinBulkOut = FALSE;
- NdisReleaseSpinLock(&pAd->GenericLock);
-
- BULK_OUT_LOCK(&pAd->BulkOutLock[0], IrqFlags);
- pAd->BulkOutPending[0] = FALSE;
- BULK_OUT_UNLOCK(&pAd->BulkOutLock[0], IrqFlags);
- }
-
- RTUSB_SET_BULK_FLAG(pAd, fRTUSB_BULK_OUT_DATA_ATE);
-
- // Kick bulk out
- RTUSBKickBulkOut(pAd);
- }
-#ifdef RALINK_28xx_QA
- else if (!strcmp(arg, "TXSTOP")) //Enter ATE mode and set Tx/Rx Idle
- {
- ATEDBGPRINT(RT_DEBUG_TRACE, ("ATE: TXSTOP\n"));
-
- atemode = pAd->ate.Mode;
- pAd->ate.Mode &= ATE_TXSTOP;
- pAd->ate.bQATxStart = FALSE;
-// pAd->ate.TxDoneCount = pAd->ate.TxCount;
-
-/*=========================================================================*/
- if (atemode & ATE_TXCARR)
- {
- // No Carrier Test set BBP R22 bit7=0, bit6=0, bit[5~0]=0x0
- ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R22, &BbpData);
- BbpData &= 0xFFFFFF00; //clear bit7, bit6, bit[5~0]
- ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R22, BbpData);
- }
- else if (atemode & ATE_TXCARRSUPP)
- {
- // No Cont. TX set BBP R22 bit7=0
- ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R22, &BbpData);
- BbpData &= ~(1 << 7); //set bit7=0
- ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R22, BbpData);
-
- // No Carrier Suppression set BBP R24 bit0=0
- ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R24, &BbpData);
- BbpData &= 0xFFFFFFFE; //clear bit0
- ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R24, BbpData);
- }
- else if ((atemode & ATE_TXFRAME) || (atemode == ATE_STOP))
- {
- if (atemode & ATE_TXCONT)
- {
- // No Cont. TX set BBP R22 bit7=0
- ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R22, &BbpData);
- BbpData &= ~(1 << 7); //set bit7=0
- ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R22, BbpData);
- }
- }
-
-/*=========================================================================*/
- RTUSBRejectPendingPackets(pAd);
- RTUSBCleanUpDataBulkOutQueue(pAd);
-
- /* not used in RT28xx */
- //RTUSBCleanUpMLMEWaitQueue(pAd);
- /* empty function so far */
- RTUSBCleanUpMLMEBulkOutQueue(pAd);
-/*=========================================================================*/
- // Abort Tx, RX DMA.
- RtmpDmaEnable(pAd, 0);
-/*=========================================================================*/
-
- /* In 28xx, pAd->PendingRx is not of type atomic_t anymore */
-// while ((atomic_read(&pAd->PendingRx) > 0)) //pAd->BulkFlags != 0 wait bulk out finish
- /* peter todo : BulkInLock */
- while (pAd->PendingRx > 0)
- {
-#if 1
- ATE_RTUSBCancelPendingBulkInIRP(pAd);
-#else
-// NdisInterlockedDecrement(&pAd->PendingRx);
- pAd->PendingRx--;
-#endif
- RTMPusecDelay(500000);
- }
-
- while (((pAd->BulkOutPending[0] == TRUE) ||
- (pAd->BulkOutPending[1] == TRUE) ||
- (pAd->BulkOutPending[2] == TRUE) ||
- (pAd->BulkOutPending[3] == TRUE)) && (pAd->BulkFlags != 0)) //pAd->BulkFlags != 0 wait bulk out finish
- {
- do
- {
- RTUSBCancelPendingBulkOutIRP(pAd);
- } while (FALSE);
-
- RTMPusecDelay(500000);
- }
-
- ASSERT(pAd->PendingRx == 0);
-/*=========================================================================*/
- // Enable Tx, Rx DMA.
- RtmpDmaEnable(pAd, 1);
-
- /* task Tx status : 0 --> task is idle, 1 --> task is running */
- pAd->ate.TxStatus = 0;
-
- // Soft reset BBP.
- BbpSoftReset(pAd);
-
- // Disable Tx
- RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &MacData);
- MacData &= (0xfffffffb);
- RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, MacData);
-
- //Clean ATE Bulk in/out counter and continue setup
- InterlockedExchange(&pAd->BulkOutRemained, 0);
-
- pAd->ContinBulkOut = FALSE;
- }
- else if (!strcmp(arg, "RXSTOP"))
- {
- ATEDBGPRINT(RT_DEBUG_TRACE, ("ATE: RXSTOP\n"));
- atemode = pAd->ate.Mode;
-
- // Disable Rx
- RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
- Value &= ~(1 << 3);
- RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
-
- pAd->ate.Mode &= ATE_RXSTOP;
- pAd->ate.bQARxStart = FALSE;
-// pAd->ate.TxDoneCount = pAd->ate.TxCount;
-
-/*=========================================================================*/
- RTUSBRejectPendingPackets(pAd);
- RTUSBCleanUpDataBulkOutQueue(pAd);
-
- /* not used in RT28xx */
- //RTUSBCleanUpMLMEWaitQueue(pAd);
- RTUSBCleanUpMLMEBulkOutQueue(pAd);
-/*=========================================================================*/
-
- // Abort Tx, RX DMA.
- RtmpDmaEnable(pAd, 0);
-/*=========================================================================*/
-// while ((atomic_read(&pAd->PendingRx) > 0))
- while (pAd->PendingRx > 0)
- {
-#if 1
- ATE_RTUSBCancelPendingBulkInIRP(pAd);
-#else
-// NdisInterlockedDecrement(&pAd->PendingRx);
- pAd->PendingRx--;
-#endif
- RTMPusecDelay(500000);
- }
-
- while (((pAd->BulkOutPending[0] == TRUE) ||
- (pAd->BulkOutPending[1] == TRUE) ||
- (pAd->BulkOutPending[2] == TRUE) ||
- (pAd->BulkOutPending[3] == TRUE)) && (pAd->BulkFlags != 0)) //pAd->BulkFlags != 0 wait bulk out finish
- {
- do
- {
- RTUSBCancelPendingBulkOutIRP(pAd);
- } while (FALSE);
-
- RTMPusecDelay(500000);
- }
-
- ASSERT(pAd->PendingRx == 0);
-/*=========================================================================*/
-
- // Soft reset BBP.
- BbpSoftReset(pAd);
- pAd->ContinBulkIn = FALSE;
- }
-#endif // RALINK_28xx_QA //
- else if (!strcmp(arg, "RXFRAME")) // Rx Frames
- {
- ATEDBGPRINT(RT_DEBUG_TRACE, ("ATE: RXFRAME\n"));
-
- // Disable Rx of MAC block
- RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
- Value &= ~(1 << 3);
- RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
-
- // Default value in BBP R22 is 0x0.
- BbpData = 0;
-
- RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &MacData);
- // Clean bit4 to stop continuous Tx production test.
- MacData &= 0xFFFFFFEF;
-
- ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R22, BbpData);
- RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, MacData);
-
- pAd->ate.Mode |= ATE_RXFRAME;
-
- // Abort Tx, RX DMA.
- RtmpDmaEnable(pAd, 0);
-
- // Disable TX of MAC block
- RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
- Value &= ~(1 << 2);
- RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
-
- // Reset Rx RING.
- for ( i = 0; i < (RX_RING_SIZE); i++)
- {
- PRX_CONTEXT pRxContext = &(pAd->RxContext[i]);
-
- pRxContext->InUse = FALSE;
- pRxContext->IRPPending = FALSE;
- pRxContext->Readable = FALSE;
-
- //
- // Get the urb from kernel back to driver.
- //
- RTUSB_UNLINK_URB(pRxContext->pUrb);
-
- /* Sleep 200 microsecs to give cancellation time to work. */
- NdisMSleep(200);
- pAd->BulkInReq = 0;
-
-// InterlockedExchange(&pAd->PendingRx, 0);
- pAd->PendingRx = 0;
- pAd->NextRxBulkInReadIndex = 0; // Next Rx Read index
- pAd->NextRxBulkInIndex = RX_RING_SIZE - 1; // Rx Bulk pointer
- pAd->NextRxBulkInPosition = 0;
- }
-
- // read to clear counters
- RTUSBReadMACRegister(pAd, RX_STA_CNT0, &temp); //RX PHY & RX CRC count
- RTUSBReadMACRegister(pAd, RX_STA_CNT1, &temp); //RX PLCP error count & CCA false alarm count
- RTUSBReadMACRegister(pAd, RX_STA_CNT2, &temp); //RX FIFO overflow frame count & RX duplicated filtered frame count
-
- pAd->ContinBulkIn = TRUE;
-
- // Enable Tx, RX DMA.
- RtmpDmaEnable(pAd, 1);
-
- // Enable RX of MAC block
- RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
- Value |= (1 << 3);
- RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
-
- // Kick bulk in
- RTUSBBulkReceive(pAd);
- }
- else
- {
- ATEDBGPRINT(RT_DEBUG_TRACE, ("ATE: Invalid arg!\n"));
- return FALSE;
- }
- RTMPusecDelay(5000);
-
- ATEDBGPRINT(RT_DEBUG_TRACE, ("<=== ATECmdHandler()\n"));
-
- return TRUE;
-}
-#endif // RT2870 //
-
-INT Set_ATE_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg)
-{
- if (ATECmdHandler(pAd, arg))
- {
- ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_Proc Success\n"));
-
-
- return TRUE;
- }
- else
- {
- ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_Proc Failed\n"));
- return FALSE;
- }
-}
-
-/*
- ==========================================================================
- Description:
- Set ATE ADDR1=DA for TxFrame(AP : To DS = 0 ; From DS = 1)
- or
- Set ATE ADDR3=DA for TxFrame(STA : To DS = 1 ; From DS = 0)
-
- Return:
- TRUE if all parameters are OK, FALSE otherwise
- ==========================================================================
-*/
-INT Set_ATE_DA_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg)
-{
- CHAR *value;
- INT i;
-
- if(strlen(arg) != 17) //Mac address acceptable format 01:02:03:04:05:06 length 17
- return FALSE;
-
- for (i=0, value = rstrtok(arg, ":"); value; value = rstrtok(NULL, ":"))
- {
- if((strlen(value) != 2) || (!isxdigit(*value)) || (!isxdigit(*(value+1))) )
- return FALSE; //Invalid
-
-
-#ifdef CONFIG_STA_SUPPORT
- AtoH(value, &pAd->ate.Addr3[i++], 1);
-#endif // CONFIG_STA_SUPPORT //
- }
-
- if(i != 6)
- return FALSE; //Invalid
-
-
-#ifdef CONFIG_STA_SUPPORT
- ATEDBGPRINT(RT_DEBUG_TRACE, ("Set_ATE_DA_Proc (DA = %2X:%2X:%2X:%2X:%2X:%2X)\n", pAd->ate.Addr3[0],
- pAd->ate.Addr3[1], pAd->ate.Addr3[2], pAd->ate.Addr3[3], pAd->ate.Addr3[4], pAd->ate.Addr3[5]));
-#endif // CONFIG_STA_SUPPORT //
-
- ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_DA_Proc Success\n"));
-
- return TRUE;
-}
-
-/*
- ==========================================================================
- Description:
- Set ATE ADDR3=SA for TxFrame(AP : To DS = 0 ; From DS = 1)
- or
- Set ATE ADDR2=SA for TxFrame(STA : To DS = 1 ; From DS = 0)
-
- Return:
- TRUE if all parameters are OK, FALSE otherwise
- ==========================================================================
-*/
-INT Set_ATE_SA_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg)
-{
- CHAR *value;
- INT i;
-
- if(strlen(arg) != 17) //Mac address acceptable format 01:02:03:04:05:06 length 17
- return FALSE;
-
- for (i=0, value = rstrtok(arg, ":"); value; value = rstrtok(NULL, ":"))
- {
- if((strlen(value) != 2) || (!isxdigit(*value)) || (!isxdigit(*(value+1))) )
- return FALSE; //Invalid
-
-
-#ifdef CONFIG_STA_SUPPORT
- AtoH(value, &pAd->ate.Addr2[i++], 1);
-#endif // CONFIG_STA_SUPPORT //
- }
-
- if(i != 6)
- return FALSE; //Invalid
-
-
-#ifdef CONFIG_STA_SUPPORT
- ATEDBGPRINT(RT_DEBUG_TRACE, ("Set_ATE_SA_Proc (SA = %2X:%2X:%2X:%2X:%2X:%2X)\n", pAd->ate.Addr2[0],
- pAd->ate.Addr2[1], pAd->ate.Addr2[2], pAd->ate.Addr2[3], pAd->ate.Addr2[4], pAd->ate.Addr2[5]));
-#endif // CONFIG_STA_SUPPORT //
-
- ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_SA_Proc Success\n"));
-
- return TRUE;
-}
-
-/*
- ==========================================================================
- Description:
- Set ATE ADDR2=BSSID for TxFrame(AP : To DS = 0 ; From DS = 1)
- or
- Set ATE ADDR1=BSSID for TxFrame(STA : To DS = 1 ; From DS = 0)
-
- Return:
- TRUE if all parameters are OK, FALSE otherwise
- ==========================================================================
-*/
-INT Set_ATE_BSSID_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg)
-{
- CHAR *value;
- INT i;
-
- if(strlen(arg) != 17) //Mac address acceptable format 01:02:03:04:05:06 length 17
- return FALSE;
-
- for (i=0, value = rstrtok(arg, ":"); value; value = rstrtok(NULL, ":"))
- {
- if((strlen(value) != 2) || (!isxdigit(*value)) || (!isxdigit(*(value+1))) )
- return FALSE; //Invalid
-
-
-#ifdef CONFIG_STA_SUPPORT
- AtoH(value, &pAd->ate.Addr1[i++], 1);
-#endif // CONFIG_STA_SUPPORT //
- }
-
- if(i != 6)
- return FALSE; //Invalid
-
-
-#ifdef CONFIG_STA_SUPPORT
- ATEDBGPRINT(RT_DEBUG_TRACE, ("Set_ATE_BSSID_Proc (BSSID = %2X:%2X:%2X:%2X:%2X:%2X)\n", pAd->ate.Addr1[0],
- pAd->ate.Addr1[1], pAd->ate.Addr1[2], pAd->ate.Addr1[3], pAd->ate.Addr1[4], pAd->ate.Addr1[5]));
-#endif // CONFIG_STA_SUPPORT //
-
- ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_BSSID_Proc Success\n"));
-
- return TRUE;
-}
-
-/*
- ==========================================================================
- Description:
- Set ATE Tx Channel
-
- Return:
- TRUE if all parameters are OK, FALSE otherwise
- ==========================================================================
-*/
-INT Set_ATE_CHANNEL_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg)
-{
- UCHAR channel;
-
- channel = simple_strtol(arg, 0, 10);
-
- if ((channel < 1) || (channel > 216))// to allow A band channel : ((channel < 1) || (channel > 14))
- {
- ATEDBGPRINT(RT_DEBUG_ERROR, ("Set_ATE_CHANNEL_Proc::Out of range, it should be in range of 1~14.\n"));
- return FALSE;
- }
- pAd->ate.Channel = channel;
-
- ATEDBGPRINT(RT_DEBUG_TRACE, ("Set_ATE_CHANNEL_Proc (ATE Channel = %d)\n", pAd->ate.Channel));
- ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_CHANNEL_Proc Success\n"));
-
-
- return TRUE;
-}
-
-/*
- ==========================================================================
- Description:
- Set ATE Tx Power0
-
- Return:
- TRUE if all parameters are OK, FALSE otherwise
- ==========================================================================
-*/
-INT Set_ATE_TX_POWER0_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg)
-{
- CHAR TxPower;
-
- TxPower = simple_strtol(arg, 0, 10);
-
- if (pAd->ate.Channel <= 14)
- {
- if ((TxPower > 31) || (TxPower < 0))
- {
- ATEDBGPRINT(RT_DEBUG_ERROR, ("Set_ATE_TX_POWER0_Proc::Out of range (Value=%d)\n", TxPower));
- return FALSE;
- }
- }
- else// 5.5GHz
- {
- if ((TxPower > 15) || (TxPower < -7))
- {
- ATEDBGPRINT(RT_DEBUG_ERROR, ("Set_ATE_TX_POWER0_Proc::Out of range (Value=%d)\n", TxPower));
- return FALSE;
- }
- }
-
- pAd->ate.TxPower0 = TxPower;
- ATETxPwrHandler(pAd, 0);
- ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_TX_POWER0_Proc Success\n"));
-
-
- return TRUE;
-}
-
-/*
- ==========================================================================
- Description:
- Set ATE Tx Power1
-
- Return:
- TRUE if all parameters are OK, FALSE otherwise
- ==========================================================================
-*/
-INT Set_ATE_TX_POWER1_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg)
-{
- CHAR TxPower;
-
- TxPower = simple_strtol(arg, 0, 10);
-
- if (pAd->ate.Channel <= 14)
- {
- if ((TxPower > 31) || (TxPower < 0))
- {
- ATEDBGPRINT(RT_DEBUG_ERROR, ("Set_ATE_TX_POWER1_Proc::Out of range (Value=%d)\n", TxPower));
- return FALSE;
- }
- }
- else
- {
- if ((TxPower > 15) || (TxPower < -7))
- {
- ATEDBGPRINT(RT_DEBUG_ERROR, ("Set_ATE_TX_POWER1_Proc::Out of range (Value=%d)\n", TxPower));
- return FALSE;
- }
- }
-
- pAd->ate.TxPower1 = TxPower;
- ATETxPwrHandler(pAd, 1);
- ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_TX_POWER1_Proc Success\n"));
-
-
- return TRUE;
-}
-
-/*
- ==========================================================================
- Description:
- Set ATE Tx Antenna
-
- Return:
- TRUE if all parameters are OK, FALSE otherwise
- ==========================================================================
-*/
-INT Set_ATE_TX_Antenna_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg)
-{
- CHAR value;
-
- value = simple_strtol(arg, 0, 10);
-
- if ((value > 2) || (value < 0))
- {
- ATEDBGPRINT(RT_DEBUG_ERROR, ("Set_ATE_TX_Antenna_Proc::Out of range (Value=%d)\n", value));
- return FALSE;
- }
-
- pAd->ate.TxAntennaSel = value;
-
- ATEDBGPRINT(RT_DEBUG_TRACE, ("Set_ATE_TX_Antenna_Proc (Antenna = %d)\n", pAd->ate.TxAntennaSel));
- ATEDBGPRINT(RT_DEBUG_TRACE,("Ralink: Set_ATE_TX_Antenna_Proc Success\n"));
-
-
- return TRUE;
-}
-
-/*
- ==========================================================================
- Description:
- Set ATE Rx Antenna
-
- Return:
- TRUE if all parameters are OK, FALSE otherwise
- ==========================================================================
-*/
-INT Set_ATE_RX_Antenna_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg)
-{
- CHAR value;
-
- value = simple_strtol(arg, 0, 10);
-
- if ((value > 3) || (value < 0))
- {
- ATEDBGPRINT(RT_DEBUG_ERROR, ("Set_ATE_RX_Antenna_Proc::Out of range (Value=%d)\n", value));
- return FALSE;
- }
-
- pAd->ate.RxAntennaSel = value;
-
- ATEDBGPRINT(RT_DEBUG_TRACE, ("Set_ATE_RX_Antenna_Proc (Antenna = %d)\n", pAd->ate.RxAntennaSel));
- ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_RX_Antenna_Proc Success\n"));
-
-
- return TRUE;
-}
-
-/*
- ==========================================================================
- Description:
- Set ATE RF frequence offset
-
- Return:
- TRUE if all parameters are OK, FALSE otherwise
- ==========================================================================
-*/
-INT Set_ATE_TX_FREQOFFSET_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg)
-{
- UCHAR RFFreqOffset;
- ULONG R4;
-
- RFFreqOffset = simple_strtol(arg, 0, 10);
-
- if(RFFreqOffset >= 64)
- {
- ATEDBGPRINT(RT_DEBUG_ERROR, ("Set_ATE_TX_FREQOFFSET_Proc::Out of range, it should be in range of 0~63.\n"));
- return FALSE;
- }
-
- pAd->ate.RFFreqOffset = RFFreqOffset;
- R4 = pAd->ate.RFFreqOffset << 15; // shift TX power control to correct RF register bit position
- R4 |= (pAd->LatchRfRegs.R4 & ((~0x001f8000)));
- pAd->LatchRfRegs.R4 = R4;
-
- RtmpRfIoWrite(pAd);
-
- ATEDBGPRINT(RT_DEBUG_TRACE, ("Set_ATE_TX_FREQOFFSET_Proc (RFFreqOffset = %d)\n", pAd->ate.RFFreqOffset));
- ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_TX_FREQOFFSET_Proc Success\n"));
-
-
- return TRUE;
-}
-
-/*
- ==========================================================================
- Description:
- Set ATE RF BW
-
- Return:
- TRUE if all parameters are OK, FALSE otherwise
- ==========================================================================
-*/
-INT Set_ATE_TX_BW_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg)
-{
- int i;
- UCHAR value = 0;
- UCHAR BBPCurrentBW;
-
- BBPCurrentBW = simple_strtol(arg, 0, 10);
-
- if(BBPCurrentBW == 0)
- pAd->ate.TxWI.BW = BW_20;
- else
- pAd->ate.TxWI.BW = BW_40;
-
- if(pAd->ate.TxWI.BW == BW_20)
- {
- if(pAd->ate.Channel <= 14)
- {
- for (i=0; i<5; i++)
- {
- if (pAd->Tx20MPwrCfgGBand[i] != 0xffffffff)
- {
- RTMP_IO_WRITE32(pAd, TX_PWR_CFG_0 + i*4, pAd->Tx20MPwrCfgGBand[i]);
- RTMPusecDelay(5000);
- }
- }
- }
- else
- {
- for (i=0; i<5; i++)
- {
- if (pAd->Tx20MPwrCfgABand[i] != 0xffffffff)
- {
- RTMP_IO_WRITE32(pAd, TX_PWR_CFG_0 + i*4, pAd->Tx20MPwrCfgABand[i]);
- RTMPusecDelay(5000);
- }
- }
- }
-
- //Set BBP R4 bit[4:3]=0:0
- ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &value);
- value &= (~0x18);
- ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, value);
-
- //Set BBP R66=0x3C
- value = 0x3C;
- ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, value);
- //Set BBP R68=0x0B
- //to improve Rx sensitivity.
- value = 0x0B;
- ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R68, value);
- //Set BBP R69=0x16
- value = 0x16;
- ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R69, value);
- //Set BBP R70=0x08
- value = 0x08;
- ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R70, value);
- //Set BBP R73=0x11
- value = 0x11;
- ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R73, value);
-
- // If Channel=14, Bandwidth=20M and Mode=CCK, Set BBP R4 bit5=1
- // (Japan filter coefficients)
- // This segment of code will only works when ATETXMODE and ATECHANNEL
- // were set to MODE_CCK and 14 respectively before ATETXBW is set to 0.
- //=====================================================================
- if (pAd->ate.Channel == 14)
- {
- int TxMode = pAd->ate.TxWI.PHYMODE;
- if (TxMode == MODE_CCK)
- {
- // when Channel==14 && Mode==CCK && BandWidth==20M, BBP R4 bit5=1
- ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &value);
- value |= 0x20; //set bit5=1
- ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, value);
- }
- }
-
- //=====================================================================
- // If bandwidth != 40M, RF Reg4 bit 21 = 0.
- pAd->LatchRfRegs.R4 &= ~0x00200000;
- RtmpRfIoWrite(pAd);
- }
- else if(pAd->ate.TxWI.BW == BW_40)
- {
- if(pAd->ate.Channel <= 14)
- {
- for (i=0; i<5; i++)
- {
- if (pAd->Tx40MPwrCfgGBand[i] != 0xffffffff)
- {
- RTMP_IO_WRITE32(pAd, TX_PWR_CFG_0 + i*4, pAd->Tx40MPwrCfgGBand[i]);
- RTMPusecDelay(5000);
- }
- }
- }
- else
- {
- for (i=0; i<5; i++)
- {
- if (pAd->Tx40MPwrCfgABand[i] != 0xffffffff)
- {
- RTMP_IO_WRITE32(pAd, TX_PWR_CFG_0 + i*4, pAd->Tx40MPwrCfgABand[i]);
- RTMPusecDelay(5000);
- }
- }
-#ifdef DOT11_N_SUPPORT
- if ((pAd->ate.TxWI.PHYMODE >= MODE_HTMIX) && (pAd->ate.TxWI.MCS == 7))
- {
- value = 0x28;
- ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R67, value);
- }
-#endif // DOT11_N_SUPPORT //
- }
-
- //Set BBP R4 bit[4:3]=1:0
- ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &value);
- value &= (~0x18);
- value |= 0x10;
- ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, value);
-
- //Set BBP R66=0x3C
- value = 0x3C;
- ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, value);
- //Set BBP R68=0x0C
- //to improve Rx sensitivity.
- value = 0x0C;
- ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R68, value);
- //Set BBP R69=0x1A
- value = 0x1A;
- ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R69, value);
- //Set BBP R70=0x0A
- value = 0x0A;
- ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R70, value);
- //Set BBP R73=0x16
- value = 0x16;
- ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R73, value);
-
- // If bandwidth = 40M, set RF Reg4 bit 21 = 1.
- pAd->LatchRfRegs.R4 |= 0x00200000;
- RtmpRfIoWrite(pAd);
- }
-
- ATEDBGPRINT(RT_DEBUG_TRACE, ("Set_ATE_TX_BW_Proc (BBPCurrentBW = %d)\n", pAd->ate.TxWI.BW));
- ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_TX_BW_Proc Success\n"));
-
-
- return TRUE;
-}
-
-/*
- ==========================================================================
- Description:
- Set ATE Tx frame length
-
- Return:
- TRUE if all parameters are OK, FALSE otherwise
- ==========================================================================
-*/
-INT Set_ATE_TX_LENGTH_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg)
-{
- pAd->ate.TxLength = simple_strtol(arg, 0, 10);
-
- if((pAd->ate.TxLength < 24) || (pAd->ate.TxLength > (MAX_FRAME_SIZE - 34/* == 2312 */)))
- {
- pAd->ate.TxLength = (MAX_FRAME_SIZE - 34/* == 2312 */);
- ATEDBGPRINT(RT_DEBUG_ERROR, ("Set_ATE_TX_LENGTH_Proc::Out of range, it should be in range of 24~%d.\n", (MAX_FRAME_SIZE - 34/* == 2312 */)));
- return FALSE;
- }
-
- ATEDBGPRINT(RT_DEBUG_TRACE, ("Set_ATE_TX_LENGTH_Proc (TxLength = %d)\n", pAd->ate.TxLength));
- ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_TX_LENGTH_Proc Success\n"));
-
-
- return TRUE;
-}
-
-/*
- ==========================================================================
- Description:
- Set ATE Tx frame count
-
- Return:
- TRUE if all parameters are OK, FALSE otherwise
- ==========================================================================
-*/
-INT Set_ATE_TX_COUNT_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg)
-{
- pAd->ate.TxCount = simple_strtol(arg, 0, 10);
-
- ATEDBGPRINT(RT_DEBUG_TRACE, ("Set_ATE_TX_COUNT_Proc (TxCount = %d)\n", pAd->ate.TxCount));
- ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_TX_COUNT_Proc Success\n"));
-
-
- return TRUE;
-}
-
-/*
- ==========================================================================
- Description:
- Set ATE Tx frame MCS
-
- Return:
- TRUE if all parameters are OK, FALSE otherwise
- ==========================================================================
-*/
-INT Set_ATE_TX_MCS_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg)
-{
- UCHAR MCS;
- int result;
-
- MCS = simple_strtol(arg, 0, 10);
- result = CheckMCSValid(pAd->ate.TxWI.PHYMODE, MCS);
-
- if (result != -1)
- {
- pAd->ate.TxWI.MCS = (UCHAR)MCS;
- }
- else
- {
- ATEDBGPRINT(RT_DEBUG_ERROR, ("Set_ATE_TX_MCS_Proc::Out of range, refer to rate table.\n"));
- return FALSE;
- }
-
- ATEDBGPRINT(RT_DEBUG_TRACE, ("Set_ATE_TX_MCS_Proc (MCS = %d)\n", pAd->ate.TxWI.MCS));
- ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_TX_MCS_Proc Success\n"));
-
-
- return TRUE;
-}
-
-/*
- ==========================================================================
- Description:
- Set ATE Tx frame Mode
- 0: MODE_CCK
- 1: MODE_OFDM
- 2: MODE_HTMIX
- 3: MODE_HTGREENFIELD
-
- Return:
- TRUE if all parameters are OK, FALSE otherwise
- ==========================================================================
-*/
-INT Set_ATE_TX_MODE_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg)
-{
- pAd->ate.TxWI.PHYMODE = simple_strtol(arg, 0, 10);
-
- if(pAd->ate.TxWI.PHYMODE > 3)
- {
- pAd->ate.TxWI.PHYMODE = 0;
- ATEDBGPRINT(RT_DEBUG_ERROR, ("Set_ATE_TX_MODE_Proc::Out of range. it should be in range of 0~3\n"));
- ATEDBGPRINT(RT_DEBUG_ERROR, ("0: CCK, 1: OFDM, 2: HT_MIX, 3: HT_GREEN_FIELD.\n"));
- return FALSE;
- }
-
- ATEDBGPRINT(RT_DEBUG_TRACE, ("Set_ATE_TX_MODE_Proc (TxMode = %d)\n", pAd->ate.TxWI.PHYMODE));
- ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_TX_MODE_Proc Success\n"));
-
-
- return TRUE;
-}
-
-/*
- ==========================================================================
- Description:
- Set ATE Tx frame GI
-
- Return:
- TRUE if all parameters are OK, FALSE otherwise
- ==========================================================================
-*/
-INT Set_ATE_TX_GI_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg)
-{
- pAd->ate.TxWI.ShortGI = simple_strtol(arg, 0, 10);
-
- if(pAd->ate.TxWI.ShortGI > 1)
- {
- pAd->ate.TxWI.ShortGI = 0;
- ATEDBGPRINT(RT_DEBUG_ERROR, ("Set_ATE_TX_GI_Proc::Out of range\n"));
- return FALSE;
- }
-
- ATEDBGPRINT(RT_DEBUG_TRACE, ("Set_ATE_TX_GI_Proc (GI = %d)\n", pAd->ate.TxWI.ShortGI));
- ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_TX_GI_Proc Success\n"));
-
-
- return TRUE;
-}
-
-/*
- ==========================================================================
- Description:
- ==========================================================================
- */
-INT Set_ATE_RX_FER_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg)
-{
- pAd->ate.bRxFer = simple_strtol(arg, 0, 10);
-
- if (pAd->ate.bRxFer == 1)
- {
- pAd->ate.RxCntPerSec = 0;
- pAd->ate.RxTotalCnt = 0;
- }
-
- ATEDBGPRINT(RT_DEBUG_TRACE, ("Set_ATE_RX_FER_Proc (bRxFer = %d)\n", pAd->ate.bRxFer));
- ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_RX_FER_Proc Success\n"));
-
-
- return TRUE;
-}
-
-INT Set_ATE_Read_RF_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg)
-{
- ate_print(KERN_EMERG "R1 = %lx\n", pAd->LatchRfRegs.R1);
- ate_print(KERN_EMERG "R2 = %lx\n", pAd->LatchRfRegs.R2);
- ate_print(KERN_EMERG "R3 = %lx\n", pAd->LatchRfRegs.R3);
- ate_print(KERN_EMERG "R4 = %lx\n", pAd->LatchRfRegs.R4);
-
- return TRUE;
-}
-
-INT Set_ATE_Write_RF1_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg)
-{
- UINT32 value = simple_strtol(arg, 0, 16);
-
- pAd->LatchRfRegs.R1 = value;
- RtmpRfIoWrite(pAd);
-
- return TRUE;
-}
-
-INT Set_ATE_Write_RF2_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg)
-{
- UINT32 value = simple_strtol(arg, 0, 16);
-
- pAd->LatchRfRegs.R2 = value;
- RtmpRfIoWrite(pAd);
-
- return TRUE;
-}
-
-INT Set_ATE_Write_RF3_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg)
-{
- UINT32 value = simple_strtol(arg, 0, 16);
-
- pAd->LatchRfRegs.R3 = value;
- RtmpRfIoWrite(pAd);
-
- return TRUE;
-}
-
-INT Set_ATE_Write_RF4_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg)
-{
- UINT32 value = simple_strtol(arg, 0, 16);
-
- pAd->LatchRfRegs.R4 = value;
- RtmpRfIoWrite(pAd);
-
- return TRUE;
-}
-
-/*
- ==========================================================================
- Description:
- Load and Write EEPROM from a binary file prepared in advance.
-
- Return:
- TRUE if all parameters are OK, FALSE otherwise
- ==========================================================================
-*/
-INT Set_ATE_Load_E2P_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg)
-{
- BOOLEAN ret = FALSE;
- PUCHAR src = EEPROM_BIN_FILE_NAME;
- struct file *srcf;
- INT32 retval, orgfsuid, orgfsgid;
- mm_segment_t orgfs;
- USHORT WriteEEPROM[(EEPROM_SIZE/2)];
- UINT32 FileLength = 0;
- UINT32 value = simple_strtol(arg, 0, 10);
-
- ATEDBGPRINT(RT_DEBUG_ERROR, ("===> %s (value=%d)\n\n", __func__, value));
-
- if (value > 0)
- {
- /* zero the e2p buffer */
- NdisZeroMemory((PUCHAR)WriteEEPROM, EEPROM_SIZE);
-
- /* save uid and gid used for filesystem access.
- ** set user and group to 0 (root)
- */
- orgfsuid = current->fsuid;
- orgfsgid = current->fsgid;
- /* as root */
- current->fsuid = current->fsgid = 0;
- orgfs = get_fs();
- set_fs(KERNEL_DS);
-
- do
- {
- /* open the bin file */
- srcf = filp_open(src, O_RDONLY, 0);
-
- if (IS_ERR(srcf))
- {
- ate_print("%s - Error %ld opening %s\n", __func__, -PTR_ERR(srcf), src);
- break;
- }
-
- /* the object must have a read method */
- if ((srcf->f_op == NULL) || (srcf->f_op->read == NULL))
- {
- ate_print("%s - %s does not have a read method\n", __func__, src);
- break;
- }
-
- /* read the firmware from the file *.bin */
- FileLength = srcf->f_op->read(srcf,
- (PUCHAR)WriteEEPROM,
- EEPROM_SIZE,
- &srcf->f_pos);
-
- if (FileLength != EEPROM_SIZE)
- {
- ate_print("%s: error file length (=%d) in e2p.bin\n",
- __func__, FileLength);
- break;
- }
- else
- {
- /* write the content of .bin file to EEPROM */
- rt_ee_write_all(pAd, WriteEEPROM);
- ret = TRUE;
- }
- break;
- } while(TRUE);
-
- /* close firmware file */
- if (IS_ERR(srcf))
- {
- ;
- }
- else
- {
- retval = filp_close(srcf, NULL);
- if (retval)
- {
- ATEDBGPRINT(RT_DEBUG_ERROR, ("--> Error %d closing %s\n", -retval, src));
-
- }
- }
-
- /* restore */
- set_fs(orgfs);
- current->fsuid = orgfsuid;
- current->fsgid = orgfsgid;
- }
- ATEDBGPRINT(RT_DEBUG_ERROR, ("<=== %s (ret=%d)\n", __func__, ret));
-
- return ret;
-
-}
-
-INT Set_ATE_Read_E2P_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg)
-{
- USHORT buffer[EEPROM_SIZE/2];
- USHORT *p;
- int i;
-
- rt_ee_read_all(pAd, (USHORT *)buffer);
- p = buffer;
- for (i = 0; i < (EEPROM_SIZE/2); i++)
- {
- ate_print("%4.4x ", *p);
- if (((i+1) % 16) == 0)
- ate_print("\n");
- p++;
- }
- return TRUE;
-}
-
-INT Set_ATE_Show_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg)
-{
- ate_print("Mode=%d\n", pAd->ate.Mode);
- ate_print("TxPower0=%d\n", pAd->ate.TxPower0);
- ate_print("TxPower1=%d\n", pAd->ate.TxPower1);
- ate_print("TxAntennaSel=%d\n", pAd->ate.TxAntennaSel);
- ate_print("RxAntennaSel=%d\n", pAd->ate.RxAntennaSel);
- ate_print("BBPCurrentBW=%d\n", pAd->ate.TxWI.BW);
- ate_print("GI=%d\n", pAd->ate.TxWI.ShortGI);
- ate_print("MCS=%d\n", pAd->ate.TxWI.MCS);
- ate_print("TxMode=%d\n", pAd->ate.TxWI.PHYMODE);
- ate_print("Addr1=%02x:%02x:%02x:%02x:%02x:%02x\n",
- pAd->ate.Addr1[0], pAd->ate.Addr1[1], pAd->ate.Addr1[2], pAd->ate.Addr1[3], pAd->ate.Addr1[4], pAd->ate.Addr1[5]);
- ate_print("Addr2=%02x:%02x:%02x:%02x:%02x:%02x\n",
- pAd->ate.Addr2[0], pAd->ate.Addr2[1], pAd->ate.Addr2[2], pAd->ate.Addr2[3], pAd->ate.Addr2[4], pAd->ate.Addr2[5]);
- ate_print("Addr3=%02x:%02x:%02x:%02x:%02x:%02x\n",
- pAd->ate.Addr3[0], pAd->ate.Addr3[1], pAd->ate.Addr3[2], pAd->ate.Addr3[3], pAd->ate.Addr3[4], pAd->ate.Addr3[5]);
- ate_print("Channel=%d\n", pAd->ate.Channel);
- ate_print("TxLength=%d\n", pAd->ate.TxLength);
- ate_print("TxCount=%u\n", pAd->ate.TxCount);
- ate_print("RFFreqOffset=%d\n", pAd->ate.RFFreqOffset);
- ate_print(KERN_EMERG "Set_ATE_Show_Proc Success\n");
- return TRUE;
-}
-
-INT Set_ATE_Help_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg)
-{
- ate_print("ATE=ATESTART, ATESTOP, TXCONT, TXCARR, TXFRAME, RXFRAME\n");
- ate_print("ATEDA\n");
- ate_print("ATESA\n");
- ate_print("ATEBSSID\n");
- ate_print("ATECHANNEL, range:0~14(unless A band !)\n");
- ate_print("ATETXPOW0, set power level of antenna 1.\n");
- ate_print("ATETXPOW1, set power level of antenna 2.\n");
- ate_print("ATETXANT, set TX antenna. 0:all, 1:antenna one, 2:antenna two.\n");
- ate_print("ATERXANT, set RX antenna.0:all, 1:antenna one, 2:antenna two, 3:antenna three.\n");
- ate_print("ATETXFREQOFFSET, set frequency offset, range 0~63\n");
- ate_print("ATETXBW, set BandWidth, 0:20MHz, 1:40MHz.\n");
- ate_print("ATETXLEN, set Frame length, range 24~%d\n", (MAX_FRAME_SIZE - 34/* == 2312 */));
- ate_print("ATETXCNT, set how many frame going to transmit.\n");
- ate_print("ATETXMCS, set MCS, reference to rate table.\n");
- ate_print("ATETXMODE, set Mode 0:CCK, 1:OFDM, 2:HT-Mix, 3:GreenField, reference to rate table.\n");
- ate_print("ATETXGI, set GI interval, 0:Long, 1:Short\n");
- ate_print("ATERXFER, 0:disable Rx Frame error rate. 1:enable Rx Frame error rate.\n");
- ate_print("ATERRF, show all RF registers.\n");
- ate_print("ATEWRF1, set RF1 register.\n");
- ate_print("ATEWRF2, set RF2 register.\n");
- ate_print("ATEWRF3, set RF3 register.\n");
- ate_print("ATEWRF4, set RF4 register.\n");
- ate_print("ATELDE2P, load EEPROM from .bin file.\n");
- ate_print("ATERE2P, display all EEPROM content.\n");
- ate_print("ATESHOW, display all parameters of ATE.\n");
- ate_print("ATEHELP, online help.\n");
-
- return TRUE;
-}
-
-/*
- ==========================================================================
- Description:
-
- AsicSwitchChannel() dedicated for ATE.
-
- ==========================================================================
-*/
-VOID ATEAsicSwitchChannel(
- IN PRTMP_ADAPTER pAd)
-{
- UINT32 R2 = 0, R3 = DEFAULT_RF_TX_POWER, R4 = 0, Value = 0;
- CHAR TxPwer = 0, TxPwer2 = 0;
- UCHAR index, BbpValue = 0, R66 = 0x30;
- RTMP_RF_REGS *RFRegTable;
- UCHAR Channel;
-
-#ifdef RALINK_28xx_QA
- if ((pAd->ate.bQATxStart == TRUE) || (pAd->ate.bQARxStart == TRUE))
- {
- if (pAd->ate.Channel != pAd->LatchRfRegs.Channel)
- {
- pAd->ate.Channel = pAd->LatchRfRegs.Channel;
- }
- return;
- }
- else
-#endif // RALINK_28xx_QA //
- Channel = pAd->ate.Channel;
-
- // Select antenna
- AsicAntennaSelect(pAd, Channel);
-
- // fill Tx power value
- TxPwer = pAd->ate.TxPower0;
- TxPwer2 = pAd->ate.TxPower1;
-
- RFRegTable = RF2850RegTable;
-
- switch (pAd->RfIcType)
- {
- /* But only 2850 and 2750 support 5.5GHz band... */
- case RFIC_2820:
- case RFIC_2850:
- case RFIC_2720:
- case RFIC_2750:
-
- for (index = 0; index < NUM_OF_2850_CHNL; index++)
- {
- if (Channel == RFRegTable[index].Channel)
- {
- R2 = RFRegTable[index].R2;
- if (pAd->Antenna.field.TxPath == 1)
- {
- R2 |= 0x4000; // If TXpath is 1, bit 14 = 1;
- }
-
- if (pAd->Antenna.field.RxPath == 2)
- {
- switch (pAd->ate.RxAntennaSel)
- {
- case 1:
- R2 |= 0x20040;
- ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &BbpValue);
- BbpValue &= 0xE4;
- BbpValue |= 0x00;
- ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BbpValue);
- break;
- case 2:
- R2 |= 0x10040;
- ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &BbpValue);
- BbpValue &= 0xE4;
- BbpValue |= 0x01;
- ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BbpValue);
- break;
- default:
- R2 |= 0x40;
- ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &BbpValue);
- BbpValue &= 0xE4;
- /* Only enable two Antenna to receive. */
- BbpValue |= 0x08;
- ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BbpValue);
- break;
- }
- }
- else if (pAd->Antenna.field.RxPath == 1)
- {
- R2 |= 0x20040; // write 1 to off RxPath
- }
-
- if (pAd->Antenna.field.TxPath == 2)
- {
- if (pAd->ate.TxAntennaSel == 1)
- {
- R2 |= 0x4000; // If TX Antenna select is 1 , bit 14 = 1; Disable Ant 2
- ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R1, &BbpValue);
- BbpValue &= 0xE7; //11100111B
- ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R1, BbpValue);
- }
- else if (pAd->ate.TxAntennaSel == 2)
- {
- R2 |= 0x8000; // If TX Antenna select is 2 , bit 15 = 1; Disable Ant 1
- ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R1, &BbpValue);
- BbpValue &= 0xE7;
- BbpValue |= 0x08;
- ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R1, BbpValue);
- }
- else
- {
- ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R1, &BbpValue);
- BbpValue &= 0xE7;
- BbpValue |= 0x10;
- ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R1, BbpValue);
- }
- }
- if (pAd->Antenna.field.RxPath == 3)
- {
- switch (pAd->ate.RxAntennaSel)
- {
- case 1:
- R2 |= 0x20040;
- ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &BbpValue);
- BbpValue &= 0xE4;
- BbpValue |= 0x00;
- ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BbpValue);
- break;
- case 2:
- R2 |= 0x10040;
- ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &BbpValue);
- BbpValue &= 0xE4;
- BbpValue |= 0x01;
- ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BbpValue);
- break;
- case 3:
- R2 |= 0x30000;
- ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &BbpValue);
- BbpValue &= 0xE4;
- BbpValue |= 0x02;
- ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BbpValue);
- break;
- default:
- ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &BbpValue);
- BbpValue &= 0xE4;
- BbpValue |= 0x10;
- ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BbpValue);
- break;
- }
- }
-
- if (Channel > 14)
- {
- // initialize R3, R4
- R3 = (RFRegTable[index].R3 & 0xffffc1ff);
- R4 = (RFRegTable[index].R4 & (~0x001f87c0)) | (pAd->ate.RFFreqOffset << 15);
-
- // According the Rory's suggestion to solve the middle range issue.
- // 5.5G band power range: 0xF9~0X0F, TX0 Reg3 bit9/TX1 Reg4 bit6="0" means the TX power reduce 7dB
- // R3
- if ((TxPwer >= -7) && (TxPwer < 0))
- {
- TxPwer = (7+TxPwer);
- TxPwer = (TxPwer > 0xF) ? (0xF) : (TxPwer);
- R3 |= (TxPwer << 10);
- ATEDBGPRINT(RT_DEBUG_TRACE, ("ATEAsicSwitchChannel: TxPwer=%d \n", TxPwer));
- }
- else
- {
- TxPwer = (TxPwer > 0xF) ? (0xF) : (TxPwer);
- R3 |= (TxPwer << 10) | (1 << 9);
- }
-
- // R4
- if ((TxPwer2 >= -7) && (TxPwer2 < 0))
- {
- TxPwer2 = (7+TxPwer2);
- TxPwer2 = (TxPwer2 > 0xF) ? (0xF) : (TxPwer2);
- R4 |= (TxPwer2 << 7);
- ATEDBGPRINT(RT_DEBUG_TRACE, ("ATEAsicSwitchChannel: TxPwer2=%d \n", TxPwer2));
- }
- else
- {
- TxPwer2 = (TxPwer2 > 0xF) ? (0xF) : (TxPwer2);
- R4 |= (TxPwer2 << 7) | (1 << 6);
- }
- }
- else
- {
- R3 = (RFRegTable[index].R3 & 0xffffc1ff) | (TxPwer << 9); // set TX power0
- R4 = (RFRegTable[index].R4 & (~0x001f87c0)) | (pAd->ate.RFFreqOffset << 15) | (TxPwer2 <<6);// Set freq offset & TxPwr1
- }
-
- // Based on BBP current mode before changing RF channel.
- if (pAd->ate.TxWI.BW == BW_40)
- {
- R4 |=0x200000;
- }
-
- // Update variables
- pAd->LatchRfRegs.Channel = Channel;
- pAd->LatchRfRegs.R1 = RFRegTable[index].R1;
- pAd->LatchRfRegs.R2 = R2;
- pAd->LatchRfRegs.R3 = R3;
- pAd->LatchRfRegs.R4 = R4;
-
- RtmpRfIoWrite(pAd);
-
- break;
- }
- }
- break;
-
- default:
- break;
- }
-
- // Change BBP setting during switch from a->g, g->a
- if (Channel <= 14)
- {
- ULONG TxPinCfg = 0x00050F0A;// 2007.10.09 by Brian : 0x0005050A ==> 0x00050F0A
-
- ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R62, (0x37 - GET_LNA_GAIN(pAd)));
- ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R63, (0x37 - GET_LNA_GAIN(pAd)));
- ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R64, (0x37 - GET_LNA_GAIN(pAd)));
-
- /* For 1T/2R chip only... */
- if (pAd->NicConfig2.field.ExternalLNAForG)
- {
- ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R82, 0x62);
- }
- else
- {
- ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R82, 0x84);
- }
-
- // According the Rory's suggestion to solve the middle range issue.
- ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R86, &BbpValue);
- ASSERT((BbpValue == 0x00));
- if ((BbpValue != 0x00))
- {
- ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R86, 0x00);
- }
-
- // 5.5GHz band selection PIN, bit1 and bit2 are complement
- RTMP_IO_READ32(pAd, TX_BAND_CFG, &Value);
- Value &= (~0x6);
- Value |= (0x04);
- RTMP_IO_WRITE32(pAd, TX_BAND_CFG, Value);
-
- // Turn off unused PA or LNA when only 1T or 1R.
- if (pAd->Antenna.field.TxPath == 1)
- {
- TxPinCfg &= 0xFFFFFFF3;
- }
- if (pAd->Antenna.field.RxPath == 1)
- {
- TxPinCfg &= 0xFFFFF3FF;
- }
-
- RTMP_IO_WRITE32(pAd, TX_PIN_CFG, TxPinCfg);
- }
- else
- {
- ULONG TxPinCfg = 0x00050F05;//2007.10.09 by Brian : 0x00050505 ==> 0x00050F05
-
- ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R62, (0x37 - GET_LNA_GAIN(pAd)));
- ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R63, (0x37 - GET_LNA_GAIN(pAd)));
- ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R64, (0x37 - GET_LNA_GAIN(pAd)));
- ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R82, 0xF2);
-
- // According the Rory's suggestion to solve the middle range issue.
- ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R86, &BbpValue);
- ASSERT((BbpValue == 0x00));
- if ((BbpValue != 0x00))
- {
- ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R86, 0x00);
- }
- ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R91, &BbpValue);
- ASSERT((BbpValue == 0x04));
-
- ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R92, &BbpValue);
- ASSERT((BbpValue == 0x00));
-
- // 5.5GHz band selection PIN, bit1 and bit2 are complement
- RTMP_IO_READ32(pAd, TX_BAND_CFG, &Value);
- Value &= (~0x6);
- Value |= (0x02);
- RTMP_IO_WRITE32(pAd, TX_BAND_CFG, Value);
-
- // Turn off unused PA or LNA when only 1T or 1R.
- if (pAd->Antenna.field.TxPath == 1)
- {
- TxPinCfg &= 0xFFFFFFF3;
- }
- if (pAd->Antenna.field.RxPath == 1)
- {
- TxPinCfg &= 0xFFFFF3FF;
- }
-
- RTMP_IO_WRITE32(pAd, TX_PIN_CFG, TxPinCfg);
- }
-
- // R66 should be set according to Channel and use 20MHz when scanning
- if (Channel <= 14)
- {
- // BG band
- R66 = 0x2E + GET_LNA_GAIN(pAd);
- ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, R66);
- }
- else
- {
- // 5.5 GHz band
- if (pAd->ate.TxWI.BW == BW_20)
- {
- R66 = (UCHAR)(0x32 + (GET_LNA_GAIN(pAd)*5)/3);
- ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, R66);
- }
- else
- {
- R66 = (UCHAR)(0x3A + (GET_LNA_GAIN(pAd)*5)/3);
- ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, R66);
- }
- }
-
- //
- // On 11A, We should delay and wait RF/BBP to be stable
- // and the appropriate time should be 1000 micro seconds
- // 2005/06/05 - On 11G, We also need this delay time. Otherwise it's difficult to pass the WHQL.
- //
- RTMPusecDelay(1000);
-
- if (Channel > 14)
- {
- // When 5.5GHz band the LSB of TxPwr will be used to reduced 7dB or not.
- ATEDBGPRINT(RT_DEBUG_TRACE, ("SwitchChannel#%d(RF=%d, %dT) to , R1=0x%08lx, R2=0x%08lx, R3=0x%08lx, R4=0x%08lx\n",
- Channel,
- pAd->RfIcType,
- pAd->Antenna.field.TxPath,
- pAd->LatchRfRegs.R1,
- pAd->LatchRfRegs.R2,
- pAd->LatchRfRegs.R3,
- pAd->LatchRfRegs.R4));
- }
- else
- {
- ATEDBGPRINT(RT_DEBUG_TRACE, ("SwitchChannel#%d(RF=%d, Pwr0=%u, Pwr1=%u, %dT) to , R1=0x%08lx, R2=0x%08lx, R3=0x%08lx, R4=0x%08lx\n",
- Channel,
- pAd->RfIcType,
- (R3 & 0x00003e00) >> 9,
- (R4 & 0x000007c0) >> 6,
- pAd->Antenna.field.TxPath,
- pAd->LatchRfRegs.R1,
- pAd->LatchRfRegs.R2,
- pAd->LatchRfRegs.R3,
- pAd->LatchRfRegs.R4));
- }
-}
-
-//
-// In fact, no one will call this routine so far !
-//
-/*
- ==========================================================================
- Description:
- Gives CCK TX rate 2 more dB TX power.
- This routine works only in ATE mode.
-
- calculate desired Tx power in RF R3.Tx0~5, should consider -
- 0. if current radio is a noisy environment (pAd->DrsCounters.fNoisyEnvironment)
- 1. TxPowerPercentage
- 2. auto calibration based on TSSI feedback
- 3. extra 2 db for CCK
- 4. -10 db upon very-short distance (AvgRSSI >= -40db) to AP
-
- NOTE: Since this routine requires the value of (pAd->DrsCounters.fNoisyEnvironment),
- it should be called AFTER MlmeDynamicTxRateSwitching()
- ==========================================================================
- */
-VOID ATEAsicAdjustTxPower(
- IN PRTMP_ADAPTER pAd)
-{
- INT i, j;
- CHAR DeltaPwr = 0;
- BOOLEAN bAutoTxAgc = FALSE;
- UCHAR TssiRef, *pTssiMinusBoundary, *pTssiPlusBoundary, TxAgcStep;
- UCHAR BbpR49 = 0, idx;
- PCHAR pTxAgcCompensate;
- ULONG TxPwr[5];
- CHAR Value;
-
- /* no one calls this procedure so far */
- if (pAd->ate.TxWI.BW == BW_40)
- {
- if (pAd->ate.Channel > 14)
- {
- TxPwr[0] = pAd->Tx40MPwrCfgABand[0];
- TxPwr[1] = pAd->Tx40MPwrCfgABand[1];
- TxPwr[2] = pAd->Tx40MPwrCfgABand[2];
- TxPwr[3] = pAd->Tx40MPwrCfgABand[3];
- TxPwr[4] = pAd->Tx40MPwrCfgABand[4];
- }
- else
- {
- TxPwr[0] = pAd->Tx40MPwrCfgGBand[0];
- TxPwr[1] = pAd->Tx40MPwrCfgGBand[1];
- TxPwr[2] = pAd->Tx40MPwrCfgGBand[2];
- TxPwr[3] = pAd->Tx40MPwrCfgGBand[3];
- TxPwr[4] = pAd->Tx40MPwrCfgGBand[4];
- }
- }
- else
- {
- if (pAd->ate.Channel > 14)
- {
- TxPwr[0] = pAd->Tx20MPwrCfgABand[0];
- TxPwr[1] = pAd->Tx20MPwrCfgABand[1];
- TxPwr[2] = pAd->Tx20MPwrCfgABand[2];
- TxPwr[3] = pAd->Tx20MPwrCfgABand[3];
- TxPwr[4] = pAd->Tx20MPwrCfgABand[4];
- }
- else
- {
- TxPwr[0] = pAd->Tx20MPwrCfgGBand[0];
- TxPwr[1] = pAd->Tx20MPwrCfgGBand[1];
- TxPwr[2] = pAd->Tx20MPwrCfgGBand[2];
- TxPwr[3] = pAd->Tx20MPwrCfgGBand[3];
- TxPwr[4] = pAd->Tx20MPwrCfgGBand[4];
- }
- }
-
- // TX power compensation for temperature variation based on TSSI.
- // Do it per 4 seconds.
- if (pAd->Mlme.OneSecPeriodicRound % 4 == 0)
- {
- if (pAd->ate.Channel <= 14)
- {
- /* bg channel */
- bAutoTxAgc = pAd->bAutoTxAgcG;
- TssiRef = pAd->TssiRefG;
- pTssiMinusBoundary = &pAd->TssiMinusBoundaryG[0];
- pTssiPlusBoundary = &pAd->TssiPlusBoundaryG[0];
- TxAgcStep = pAd->TxAgcStepG;
- pTxAgcCompensate = &pAd->TxAgcCompensateG;
- }
- else
- {
- /* a channel */
- bAutoTxAgc = pAd->bAutoTxAgcA;
- TssiRef = pAd->TssiRefA;
- pTssiMinusBoundary = &pAd->TssiMinusBoundaryA[0];
- pTssiPlusBoundary = &pAd->TssiPlusBoundaryA[0];
- TxAgcStep = pAd->TxAgcStepA;
- pTxAgcCompensate = &pAd->TxAgcCompensateA;
- }
-
- if (bAutoTxAgc)
- {
- /* BbpR49 is unsigned char */
- ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R49, &BbpR49);
-
- /* (p) TssiPlusBoundaryG[0] = 0 = (m) TssiMinusBoundaryG[0] */
- /* compensate: +4 +3 +2 +1 0 -1 -2 -3 -4 * steps */
- /* step value is defined in pAd->TxAgcStepG for tx power value */
-
- /* [4]+1+[4] p4 p3 p2 p1 o1 m1 m2 m3 m4 */
- /* ex: 0x00 0x15 0x25 0x45 0x88 0xA0 0xB5 0xD0 0xF0
- above value are examined in mass factory production */
- /* [4] [3] [2] [1] [0] [1] [2] [3] [4] */
-
- /* plus is 0x10 ~ 0x40, minus is 0x60 ~ 0x90 */
- /* if value is between p1 ~ o1 or o1 ~ s1, no need to adjust tx power */
- /* if value is 0x65, tx power will be -= TxAgcStep*(2-1) */
-
- if (BbpR49 > pTssiMinusBoundary[1])
- {
- // Reading is larger than the reference value.
- // Check for how large we need to decrease the Tx power.
- for (idx = 1; idx < 5; idx++)
- {
- if (BbpR49 <= pTssiMinusBoundary[idx]) // Found the range
- break;
- }
- // The index is the step we should decrease, idx = 0 means there is nothing to compensate
-// if (R3 > (ULONG) (TxAgcStep * (idx-1)))
- *pTxAgcCompensate = -(TxAgcStep * (idx-1));
-// else
-// *pTxAgcCompensate = -((UCHAR)R3);
-
- DeltaPwr += (*pTxAgcCompensate);
- ATEDBGPRINT(RT_DEBUG_TRACE, ("-- Tx Power, BBP R1=%x, TssiRef=%x, TxAgcStep=%x, step = -%d\n",
- BbpR49, TssiRef, TxAgcStep, idx-1));
- }
- else if (BbpR49 < pTssiPlusBoundary[1])
- {
- // Reading is smaller than the reference value
- // check for how large we need to increase the Tx power
- for (idx = 1; idx < 5; idx++)
- {
- if (BbpR49 >= pTssiPlusBoundary[idx]) // Found the range
- break;
- }
- // The index is the step we should increase, idx = 0 means there is nothing to compensate
- *pTxAgcCompensate = TxAgcStep * (idx-1);
- DeltaPwr += (*pTxAgcCompensate);
- ATEDBGPRINT(RT_DEBUG_TRACE, ("++ Tx Power, BBP R1=%x, TssiRef=%x, TxAgcStep=%x, step = +%d\n",
- BbpR49, TssiRef, TxAgcStep, idx-1));
- }
- else
- {
- *pTxAgcCompensate = 0;
- ATEDBGPRINT(RT_DEBUG_TRACE, (" Tx Power, BBP R1=%x, TssiRef=%x, TxAgcStep=%x, step = +%d\n",
- BbpR49, TssiRef, TxAgcStep, 0));
- }
- }
- }
- else
- {
- if (pAd->ate.Channel <= 14)
- {
- bAutoTxAgc = pAd->bAutoTxAgcG;
- pTxAgcCompensate = &pAd->TxAgcCompensateG;
- }
- else
- {
- bAutoTxAgc = pAd->bAutoTxAgcA;
- pTxAgcCompensate = &pAd->TxAgcCompensateA;
- }
-
- if (bAutoTxAgc)
- DeltaPwr += (*pTxAgcCompensate);
- }
-
- /* calculate delta power based on the percentage specified from UI */
- // E2PROM setting is calibrated for maximum TX power (i.e. 100%)
- // We lower TX power here according to the percentage specified from UI
- if (pAd->CommonCfg.TxPowerPercentage == 0xffffffff) // AUTO TX POWER control
- ;
- else if (pAd->CommonCfg.TxPowerPercentage > 90) // 91 ~ 100% & AUTO, treat as 100% in terms of mW
- ;
- else if (pAd->CommonCfg.TxPowerPercentage > 60) // 61 ~ 90%, treat as 75% in terms of mW
- {
- DeltaPwr -= 1;
- }
- else if (pAd->CommonCfg.TxPowerPercentage > 30) // 31 ~ 60%, treat as 50% in terms of mW
- {
- DeltaPwr -= 3;
- }
- else if (pAd->CommonCfg.TxPowerPercentage > 15) // 16 ~ 30%, treat as 25% in terms of mW
- {
- DeltaPwr -= 6;
- }
- else if (pAd->CommonCfg.TxPowerPercentage > 9) // 10 ~ 15%, treat as 12.5% in terms of mW
- {
- DeltaPwr -= 9;
- }
- else // 0 ~ 9 %, treat as MIN(~3%) in terms of mW
- {
- DeltaPwr -= 12;
- }
-
- /* reset different new tx power for different TX rate */
- for(i=0; i<5; i++)
- {
- if (TxPwr[i] != 0xffffffff)
- {
- for (j=0; j<8; j++)
- {
- Value = (CHAR)((TxPwr[i] >> j*4) & 0x0F); /* 0 ~ 15 */
-
- if ((Value + DeltaPwr) < 0)
- {
- Value = 0; /* min */
- }
- else if ((Value + DeltaPwr) > 0xF)
- {
- Value = 0xF; /* max */
- }
- else
- {
- Value += DeltaPwr; /* temperature compensation */
- }
-
- /* fill new value to CSR offset */
- TxPwr[i] = (TxPwr[i] & ~(0x0000000F << j*4)) | (Value << j*4);
- }
-
- /* write tx power value to CSR */
- /* TX_PWR_CFG_0 (8 tx rate) for TX power for OFDM 12M/18M
- TX power for OFDM 6M/9M
- TX power for CCK5.5M/11M
- TX power for CCK1M/2M */
- /* TX_PWR_CFG_1 ~ TX_PWR_CFG_4 */
- RTMP_IO_WRITE32(pAd, TX_PWR_CFG_0 + i*4, TxPwr[i]);
-
-
- }
- }
-
-}
-
-/*
- ========================================================================
- Routine Description:
- Write TxWI for ATE mode.
-
- Return Value:
- None
- ========================================================================
-*/
-
-#ifdef RT2870
-static VOID ATEWriteTxWI(
- IN PRTMP_ADAPTER pAd,
- IN PTXWI_STRUC pTxWI,
- IN BOOLEAN FRAG,
- IN BOOLEAN InsTimestamp,
- IN BOOLEAN AMPDU,
- IN BOOLEAN Ack,
- IN BOOLEAN NSeq, // HW new a sequence.
- IN UCHAR BASize,
- IN UCHAR WCID,
- IN ULONG Length,
- IN UCHAR PID,
- IN UCHAR MIMOps,
- IN UCHAR Txopmode,
- IN BOOLEAN CfAck,
- IN HTTRANSMIT_SETTING Transmit)
-{
- //
- // Always use Long preamble before verifiation short preamble functionality works well.
- // Todo: remove the following line if short preamble functionality works
- //
- OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_SHORT_PREAMBLE_INUSED);
- pTxWI->FRAG= FRAG;
- pTxWI->TS= InsTimestamp;
- pTxWI->AMPDU = AMPDU;
-
- pTxWI->MIMOps = PWR_ACTIVE;
- pTxWI->MpduDensity = 4;
- pTxWI->ACK = Ack;
- pTxWI->txop = Txopmode;
- pTxWI->NSEQ = NSeq;
- pTxWI->BAWinSize = BASize;
-
- pTxWI->WirelessCliID = WCID;
- pTxWI->MPDUtotalByteCount = Length;
- pTxWI->PacketId = PID;
-
- pTxWI->BW = Transmit.field.BW;
- pTxWI->ShortGI = Transmit.field.ShortGI;
- pTxWI->STBC= Transmit.field.STBC;
-
- pTxWI->MCS = Transmit.field.MCS;
- pTxWI->PHYMODE= Transmit.field.MODE;
-
-#ifdef DOT11_N_SUPPORT
- //
- // MMPS is 802.11n features. Because TxWI->MCS > 7 must be HT mode,
- // so need not check if it's HT rate.
- //
- if ((MIMOps == MMPS_STATIC) && (pTxWI->MCS > 7))
- pTxWI->MCS = 7;
-
- if ((MIMOps == MMPS_DYNAMIC) && (pTxWI->MCS > 7)) // SMPS protect 2 spatial.
- pTxWI->MIMOps = 1;
-#endif // DOT11_N_SUPPORT //
-
- pTxWI->CFACK = CfAck;
-
- return;
-}
-#endif // RT2870 //
-/*
- ========================================================================
-
- Routine Description:
- Disable protection for ATE.
- ========================================================================
-*/
-VOID ATEDisableAsicProtect(
- IN PRTMP_ADAPTER pAd)
-{
- PROT_CFG_STRUC ProtCfg, ProtCfg4;
- UINT32 Protect[6];
- USHORT offset;
- UCHAR i;
- UINT32 MacReg = 0;
-
- // Config ASIC RTS threshold register
- RTMP_IO_READ32(pAd, TX_RTS_CFG, &MacReg);
- MacReg &= 0xFF0000FF;
- MacReg |= (pAd->CommonCfg.RtsThreshold << 8);
- RTMP_IO_WRITE32(pAd, TX_RTS_CFG, MacReg);
-
- // Initial common protection settings
- RTMPZeroMemory(Protect, sizeof(Protect));
- ProtCfg4.word = 0;
- ProtCfg.word = 0;
- ProtCfg.field.TxopAllowGF40 = 1;
- ProtCfg.field.TxopAllowGF20 = 1;
- ProtCfg.field.TxopAllowMM40 = 1;
- ProtCfg.field.TxopAllowMM20 = 1;
- ProtCfg.field.TxopAllowOfdm = 1;
- ProtCfg.field.TxopAllowCck = 1;
- ProtCfg.field.RTSThEn = 1;
- ProtCfg.field.ProtectNav = ASIC_SHORTNAV;
-
- // Handle legacy(B/G) protection
- ProtCfg.field.ProtectRate = pAd->CommonCfg.RtsRate;
- ProtCfg.field.ProtectCtrl = 0;
- Protect[0] = ProtCfg.word;
- Protect[1] = ProtCfg.word;
-
- // NO PROTECT
- // 1.All STAs in the BSS are 20/40 MHz HT
- // 2. in ai 20/40MHz BSS
- // 3. all STAs are 20MHz in a 20MHz BSS
- // Pure HT. no protection.
-
- // MM20_PROT_CFG
- // Reserved (31:27)
- // PROT_TXOP(25:20) -- 010111
- // PROT_NAV(19:18) -- 01 (Short NAV protection)
- // PROT_CTRL(17:16) -- 00 (None)
- // PROT_RATE(15:0) -- 0x4004 (OFDM 24M)
- Protect[2] = 0x01744004;
-
- // MM40_PROT_CFG
- // Reserved (31:27)
- // PROT_TXOP(25:20) -- 111111
- // PROT_NAV(19:18) -- 01 (Short NAV protection)
- // PROT_CTRL(17:16) -- 00 (None)
- // PROT_RATE(15:0) -- 0x4084 (duplicate OFDM 24M)
- Protect[3] = 0x03f44084;
-
- // CF20_PROT_CFG
- // Reserved (31:27)
- // PROT_TXOP(25:20) -- 010111
- // PROT_NAV(19:18) -- 01 (Short NAV protection)
- // PROT_CTRL(17:16) -- 00 (None)
- // PROT_RATE(15:0) -- 0x4004 (OFDM 24M)
- Protect[4] = 0x01744004;
-
- // CF40_PROT_CFG
- // Reserved (31:27)
- // PROT_TXOP(25:20) -- 111111
- // PROT_NAV(19:18) -- 01 (Short NAV protection)
- // PROT_CTRL(17:16) -- 00 (None)
- // PROT_RATE(15:0) -- 0x4084 (duplicate OFDM 24M)
- Protect[5] = 0x03f44084;
-
- pAd->CommonCfg.IOTestParm.bRTSLongProtOn = FALSE;
-
- offset = CCK_PROT_CFG;
- for (i = 0;i < 6;i++)
- RTMP_IO_WRITE32(pAd, offset + i*4, Protect[i]);
-
-}
-
-#ifdef RT2870
-/*
- ========================================================================
- Routine Description:
- Write TxInfo for ATE mode.
-
- Return Value:
- None
- ========================================================================
-*/
-static VOID ATEWriteTxInfo(
- IN PRTMP_ADAPTER pAd,
- IN PTXINFO_STRUC pTxInfo,
- IN USHORT USBDMApktLen,
- IN BOOLEAN bWiv,
- IN UCHAR QueueSel,
- IN UCHAR NextValid,
- IN UCHAR TxBurst)
-{
- pTxInfo->USBDMATxPktLen = USBDMApktLen;
- pTxInfo->QSEL = QueueSel;
-
- if (QueueSel != FIFO_EDCA)
- ATEDBGPRINT(RT_DEBUG_TRACE, ("=======> QueueSel != FIFO_EDCA<=======\n"));
-
- pTxInfo->USBDMANextVLD = NextValid;
- pTxInfo->USBDMATxburst = TxBurst;
- pTxInfo->WIV = bWiv;
- pTxInfo->SwUseLastRound = 0;
- pTxInfo->rsv = 0;
- pTxInfo->rsv2 = 0;
-
- return;
-}
-#endif // RT2870 //
-
-/* There are two ways to convert Rssi */
-#if 1
-//
-// The way used with GET_LNA_GAIN().
-//
-CHAR ATEConvertToRssi(
- IN PRTMP_ADAPTER pAd,
- IN CHAR Rssi,
- IN UCHAR RssiNumber)
-{
- UCHAR RssiOffset, LNAGain;
-
- // Rssi equals to zero should be an invalid value
- if (Rssi == 0)
- return -99;
-
- LNAGain = GET_LNA_GAIN(pAd);
- if (pAd->LatchRfRegs.Channel > 14)
- {
- if (RssiNumber == 0)
- RssiOffset = pAd->ARssiOffset0;
- else if (RssiNumber == 1)
- RssiOffset = pAd->ARssiOffset1;
- else
- RssiOffset = pAd->ARssiOffset2;
- }
- else
- {
- if (RssiNumber == 0)
- RssiOffset = pAd->BGRssiOffset0;
- else if (RssiNumber == 1)
- RssiOffset = pAd->BGRssiOffset1;
- else
- RssiOffset = pAd->BGRssiOffset2;
- }
-
- return (-12 - RssiOffset - LNAGain - Rssi);
-}
-#else
-//
-// The way originally used in ATE of rt2860ap.
-//
-CHAR ATEConvertToRssi(
- IN PRTMP_ADAPTER pAd,
- IN CHAR Rssi,
- IN UCHAR RssiNumber)
-{
- UCHAR RssiOffset, LNAGain;
-
- // Rssi equals to zero should be an invalid value
- if (Rssi == 0)
- return -99;
-
- if (pAd->LatchRfRegs.Channel > 14)
- {
- LNAGain = pAd->ALNAGain;
- if (RssiNumber == 0)
- RssiOffset = pAd->ARssiOffset0;
- else if (RssiNumber == 1)
- RssiOffset = pAd->ARssiOffset1;
- else
- RssiOffset = pAd->ARssiOffset2;
- }
- else
- {
- LNAGain = pAd->BLNAGain;
- if (RssiNumber == 0)
- RssiOffset = pAd->BGRssiOffset0;
- else if (RssiNumber == 1)
- RssiOffset = pAd->BGRssiOffset1;
- else
- RssiOffset = pAd->BGRssiOffset2;
- }
-
- return (-32 - RssiOffset + LNAGain - Rssi);
-}
-#endif /* end of #if 1 */
-
-/*
- ========================================================================
-
- Routine Description:
- Set Japan filter coefficients if needed.
- Note:
- This routine should only be called when
- entering TXFRAME mode or TXCONT mode.
-
- ========================================================================
-*/
-static VOID SetJapanFilter(
- IN PRTMP_ADAPTER pAd)
-{
- UCHAR BbpData = 0;
-
- //
- // If Channel=14 and Bandwidth=20M and Mode=CCK, set BBP R4 bit5=1
- // (Japan Tx filter coefficients)when (TXFRAME or TXCONT).
- //
- ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &BbpData);
-
- if ((pAd->ate.TxWI.PHYMODE == MODE_CCK) && (pAd->ate.Channel == 14) && (pAd->ate.TxWI.BW == BW_20))
- {
- BbpData |= 0x20; // turn on
- ATEDBGPRINT(RT_DEBUG_TRACE, ("SetJapanFilter!!!\n"));
- }
- else
- {
- BbpData &= 0xdf; // turn off
- ATEDBGPRINT(RT_DEBUG_TRACE, ("ClearJapanFilter!!!\n"));
- }
-
- ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, BbpData);
-}
-
-VOID ATESampleRssi(
- IN PRTMP_ADAPTER pAd,
- IN PRXWI_STRUC pRxWI)
-{
- /* There are two ways to collect RSSI. */
-#if 1
- //pAd->LastRxRate = (USHORT)((pRxWI->MCS) + (pRxWI->BW <<7) + (pRxWI->ShortGI <<8)+ (pRxWI->PHYMODE <<14)) ;
- if (pRxWI->RSSI0 != 0)
- {
- pAd->ate.LastRssi0 = ATEConvertToRssi(pAd, (CHAR) pRxWI->RSSI0, RSSI_0);
- pAd->ate.AvgRssi0X8 = (pAd->ate.AvgRssi0X8 - pAd->ate.AvgRssi0) + pAd->ate.LastRssi0;
- pAd->ate.AvgRssi0 = pAd->ate.AvgRssi0X8 >> 3;
- }
- if (pRxWI->RSSI1 != 0)
- {
- pAd->ate.LastRssi1 = ATEConvertToRssi(pAd, (CHAR) pRxWI->RSSI1, RSSI_1);
- pAd->ate.AvgRssi1X8 = (pAd->ate.AvgRssi1X8 - pAd->ate.AvgRssi1) + pAd->ate.LastRssi1;
- pAd->ate.AvgRssi1 = pAd->ate.AvgRssi1X8 >> 3;
- }
- if (pRxWI->RSSI2 != 0)
- {
- pAd->ate.LastRssi2 = ATEConvertToRssi(pAd, (CHAR) pRxWI->RSSI2, RSSI_2);
- pAd->ate.AvgRssi2X8 = (pAd->ate.AvgRssi2X8 - pAd->ate.AvgRssi2) + pAd->ate.LastRssi2;
- pAd->ate.AvgRssi2 = pAd->ate.AvgRssi2X8 >> 3;
- }
-
- pAd->ate.LastSNR0 = (CHAR)(pRxWI->SNR0);// CHAR ==> UCHAR ?
- pAd->ate.LastSNR1 = (CHAR)(pRxWI->SNR1);// CHAR ==> UCHAR ?
-
- pAd->ate.NumOfAvgRssiSample ++;
-#else
- pAd->ate.LastSNR0 = (CHAR)(pRxWI->SNR0);
- pAd->ate.LastSNR1 = (CHAR)(pRxWI->SNR1);
- pAd->ate.RxCntPerSec++;
- pAd->ate.LastRssi0 = ATEConvertToRssi(pAd, (CHAR) pRxWI->RSSI0, RSSI_0);
- pAd->ate.LastRssi1 = ATEConvertToRssi(pAd, (CHAR) pRxWI->RSSI1, RSSI_1);
- pAd->ate.LastRssi2 = ATEConvertToRssi(pAd, (CHAR) pRxWI->RSSI2, RSSI_2);
- pAd->ate.AvgRssi0X8 = (pAd->ate.AvgRssi0X8 - pAd->ate.AvgRssi0) + pAd->ate.LastRssi0;
- pAd->ate.AvgRssi0 = pAd->ate.AvgRssi0X8 >> 3;
- pAd->ate.AvgRssi1X8 = (pAd->ate.AvgRssi1X8 - pAd->ate.AvgRssi1) + pAd->ate.LastRssi1;
- pAd->ate.AvgRssi1 = pAd->ate.AvgRssi1X8 >> 3;
- pAd->ate.AvgRssi2X8 = (pAd->ate.AvgRssi2X8 - pAd->ate.AvgRssi2) + pAd->ate.LastRssi2;
- pAd->ate.AvgRssi2 = pAd->ate.AvgRssi2X8 >> 3;
- pAd->ate.NumOfAvgRssiSample ++;
-#endif
-}
-
-#ifdef CONFIG_STA_SUPPORT
-VOID RTMPStationStop(
- IN PRTMP_ADAPTER pAd)
-{
-// BOOLEAN Cancelled;
-
- ATEDBGPRINT(RT_DEBUG_TRACE, ("==> RTMPStationStop\n"));
-
-#if 0
- RTMPCancelTimer(&pAd->MlmeAux.AssocTimer, &Cancelled);
- RTMPCancelTimer(&pAd->MlmeAux.ReassocTimer, &Cancelled);
- RTMPCancelTimer(&pAd->MlmeAux.DisassocTimer, &Cancelled);
- RTMPCancelTimer(&pAd->MlmeAux.AuthTimer, &Cancelled);
- RTMPCancelTimer(&pAd->MlmeAux.BeaconTimer, &Cancelled);
- RTMPCancelTimer(&pAd->MlmeAux.ScanTimer, &Cancelled);
-#endif
- // For rx statistics, we need to keep this timer running.
-// RTMPCancelTimer(&pAd->Mlme.PeriodicTimer, &Cancelled);
-
- ATEDBGPRINT(RT_DEBUG_TRACE, ("<== RTMPStationStop\n"));
-}
-
-VOID RTMPStationStart(
- IN PRTMP_ADAPTER pAd)
-{
- ATEDBGPRINT(RT_DEBUG_TRACE, ("==> RTMPStationStart\n"));
- ATEDBGPRINT(RT_DEBUG_TRACE, ("<== RTMPStationStart\n"));
-}
-#endif // CONFIG_STA_SUPPORT //
-
-/*
- ==========================================================================
- Description:
- Setup Frame format.
- NOTE:
- This routine should only be used in ATE mode.
- ==========================================================================
- */
-
-#ifdef RT2870
-/*======================Start of RT2870======================*/
-/* */
-/* */
-static INT ATESetUpFrame(
- IN PRTMP_ADAPTER pAd,
- IN UINT32 TxIdx)
-{
- UINT j;
- PTX_CONTEXT pNullContext;
- PUCHAR pDest;
- HTTRANSMIT_SETTING TxHTPhyMode;
- PTXWI_STRUC pTxWI;
- PTXINFO_STRUC pTxInfo;
- UINT32 TransferBufferLength, OrgBufferLength = 0;
- UCHAR padLen = 0;
-#ifdef RALINK_28xx_QA
- PHEADER_802_11 pHeader80211 = NULL;
-#endif // RALINK_28xx_QA //
-
- if ((RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS)) ||
- (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BULKOUT_RESET)) ||
- (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS)) ||
- (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)))
- {
- return -1;
- }
-
- /* We always use QID_AC_BE and FIFO_EDCA in ATE mode. */
-
- pNullContext = &(pAd->NullContext);
- ASSERT(pNullContext != NULL);
-
- if (pNullContext->InUse == FALSE)
- {
- // Set the in use bit
- pNullContext->InUse = TRUE;
- NdisZeroMemory(&(pAd->NullFrame), sizeof(HEADER_802_11));
-
- // Fill 802.11 header.
-#ifdef RALINK_28xx_QA
- if (pAd->ate.bQATxStart == TRUE)
- {
- pHeader80211 = NdisMoveMemory(&(pAd->NullFrame), pAd->ate.Header, pAd->ate.HLen);
-// pDest = NdisMoveMemory(&(pAd->NullFrame), pAd->ate.Header, pAd->ate.HLen);
-// pHeader80211 = (PHEADER_802_11)pDest;
- }
- else
-#endif // RALINK_28xx_QA //
- {
- // Fill 802.11 header.
- NdisMoveMemory(&(pAd->NullFrame), TemplateFrame, sizeof(HEADER_802_11));
- }
-#ifdef RT_BIG_ENDIAN
- RTMPFrameEndianChange(pAd, (PUCHAR)&(pAd->NullFrame), DIR_READ, FALSE);
-#endif // RT_BIG_ENDIAN //
-
-#ifdef RALINK_28xx_QA
- if (pAd->ate.bQATxStart == TRUE)
- {
- /* modify sequence number.... */
- if (pAd->ate.TxDoneCount == 0)
- {
- pAd->ate.seq = pHeader80211->Sequence;
- }
- else
- {
- pHeader80211->Sequence = ++pAd->ate.seq;
- }
- /* We already got all the addr. fields from QA GUI. */
- }
- else
-#endif // RALINK_28xx_QA //
- {
- COPY_MAC_ADDR(pAd->NullFrame.Addr1, pAd->ate.Addr1);
- COPY_MAC_ADDR(pAd->NullFrame.Addr2, pAd->ate.Addr2);
- COPY_MAC_ADDR(pAd->NullFrame.Addr3, pAd->ate.Addr3);
- }
-
- RTMPZeroMemory(&pAd->NullContext.TransferBuffer->field.WirelessPacket[0], TX_BUFFER_NORMSIZE);//???
- pTxInfo = (PTXINFO_STRUC)&pAd->NullContext.TransferBuffer->field.WirelessPacket[0];
-
-#ifdef RALINK_28xx_QA
- if (pAd->ate.bQATxStart == TRUE)
- {
- // Avoid to exceed the range of WirelessPacket[].
- ASSERT(pAd->ate.TxInfo.USBDMATxPktLen <= (MAX_FRAME_SIZE - 34/* == 2312 */));
- NdisMoveMemory(pTxInfo, &(pAd->ate.TxInfo), sizeof(pAd->ate.TxInfo));
- }
- else
-#endif // RALINK_28xx_QA //
- {
- // Avoid to exceed the range of WirelessPacket[].
- ASSERT(pAd->ate.TxLength <= (MAX_FRAME_SIZE - 34/* == 2312 */));
-
- // pTxInfo->USBDMATxPktLen will be updated to include padding later.
- ATEWriteTxInfo(pAd, pTxInfo, (USHORT)(TXWI_SIZE + pAd->ate.TxLength), TRUE, EpToQueue[MGMTPIPEIDX], FALSE, FALSE);
- pTxInfo->QSEL = FIFO_EDCA;
- }
-
- pTxWI = (PTXWI_STRUC)&pAd->NullContext.TransferBuffer->field.WirelessPacket[TXINFO_SIZE];
-
- // Fill TxWI.
- if (pAd->ate.bQATxStart == TRUE)
- {
- TxHTPhyMode.field.BW = pAd->ate.TxWI.BW;
- TxHTPhyMode.field.ShortGI = pAd->ate.TxWI.ShortGI;
- TxHTPhyMode.field.STBC = pAd->ate.TxWI.STBC;
- TxHTPhyMode.field.MCS = pAd->ate.TxWI.MCS;
- TxHTPhyMode.field.MODE = pAd->ate.TxWI.PHYMODE;
- ATEWriteTxWI(pAd, pTxWI, pAd->ate.TxWI.FRAG, pAd->ate.TxWI.TS, pAd->ate.TxWI.AMPDU, pAd->ate.TxWI.ACK, pAd->ate.TxWI.NSEQ,
- pAd->ate.TxWI.BAWinSize, BSSID_WCID, pAd->ate.TxWI.MPDUtotalByteCount/* include 802.11 header */, pAd->ate.TxWI.PacketId, 0, pAd->ate.TxWI.txop/*IFS_HTTXOP*/, pAd->ate.TxWI.CFACK/*FALSE*/, TxHTPhyMode);
- }
- else
- {
- TxHTPhyMode.field.BW = pAd->ate.TxWI.BW;
- TxHTPhyMode.field.ShortGI = pAd->ate.TxWI.ShortGI;
- TxHTPhyMode.field.STBC = 0;
- TxHTPhyMode.field.MCS = pAd->ate.TxWI.MCS;
- TxHTPhyMode.field.MODE = pAd->ate.TxWI.PHYMODE;
-
- ATEWriteTxWI(pAd, pTxWI, FALSE, FALSE, FALSE, FALSE/* No ack required. */, FALSE, 0, BSSID_WCID, pAd->ate.TxLength,
- 0, 0, IFS_HTTXOP, FALSE, TxHTPhyMode);// "MMPS_STATIC" instead of "MMPS_DYNAMIC" ???
- }
-
- RTMPMoveMemory(&pAd->NullContext.TransferBuffer->field.WirelessPacket[TXINFO_SIZE+TXWI_SIZE], &pAd->NullFrame, sizeof(HEADER_802_11));
-
- pDest = &(pAd->NullContext.TransferBuffer->field.WirelessPacket[TXINFO_SIZE+TXWI_SIZE+sizeof(HEADER_802_11)]);
-
- // Prepare frame payload
-#ifdef RALINK_28xx_QA
- if (pAd->ate.bQATxStart == TRUE)
- {
- // copy pattern
- if ((pAd->ate.PLen != 0))
- {
- for (j = 0; j < pAd->ate.DLen; j+=pAd->ate.PLen)
- {
- RTMPMoveMemory(pDest, pAd->ate.Pattern, pAd->ate.PLen);
- pDest += pAd->ate.PLen;
- }
- }
- TransferBufferLength = TXINFO_SIZE + TXWI_SIZE + pAd->ate.TxWI.MPDUtotalByteCount;
- }
- else
-#endif // RALINK_28xx_QA //
- {
- for (j = 0; j < (pAd->ate.TxLength - sizeof(HEADER_802_11)); j++)
- {
- *pDest = 0xA5;
- pDest += 1;
- }
- TransferBufferLength = TXINFO_SIZE + TXWI_SIZE + pAd->ate.TxLength;
- }
-
-#if 1
- OrgBufferLength = TransferBufferLength;
- TransferBufferLength = (TransferBufferLength + 3) & (~3);
-
- // Always add 4 extra bytes at every packet.
- padLen = TransferBufferLength - OrgBufferLength + 4;/* 4 == last packet padding */
- ASSERT((padLen <= (RTMP_PKT_TAIL_PADDING - 4/* 4 == MaxBulkOutsize alignment padding */)));
-
- /* Now memzero all extra padding bytes. */
- NdisZeroMemory(pDest, padLen);
- pDest += padLen;
-#else
- if ((TransferBufferLength % 4) == 1)
- {
- NdisZeroMemory(pDest, 7);
- pDest += 7;
- TransferBufferLength += 3;
- }
- else if ((TransferBufferLength % 4) == 2)
- {
- NdisZeroMemory(pDest, 6);
- pDest += 6;
- TransferBufferLength += 2;
- }
- else if ((TransferBufferLength % 4) == 3)
- {
- NdisZeroMemory(pDest, 5);
- pDest += 5;
- TransferBufferLength += 1;
- }
-#endif // 1 //
-
- // Update pTxInfo->USBDMATxPktLen to include padding.
- pTxInfo->USBDMATxPktLen = TransferBufferLength - TXINFO_SIZE;
-
- TransferBufferLength += 4;
-
- // If TransferBufferLength is multiple of 64, add extra 4 bytes again.
- if ((TransferBufferLength % pAd->BulkOutMaxPacketSize) == 0)
- {
- NdisZeroMemory(pDest, 4);
- TransferBufferLength += 4;
- }
-
- // Fill out frame length information for global Bulk out arbitor
- pAd->NullContext.BulkOutSize = TransferBufferLength;
- }
-#ifdef RT_BIG_ENDIAN
- RTMPWIEndianChange((PUCHAR)pTxWI, TYPE_TXWI);
- RTMPFrameEndianChange(pAd, (((PUCHAR)pTxInfo)+TXWI_SIZE+TXINFO_SIZE), DIR_WRITE, FALSE);
- RTMPDescriptorEndianChange((PUCHAR)pTxInfo, TYPE_TXINFO);
-#endif // RT_BIG_ENDIAN //
- return 0;
-}
-
-VOID ATE_RTUSBBulkOutDataPacketComplete(purbb_t pUrb, struct pt_regs *pt_regs)
-{
- PRTMP_ADAPTER pAd;
- PTX_CONTEXT pNullContext;
- UCHAR BulkOutPipeId;
- NTSTATUS Status;
- unsigned long IrqFlags;
- ULONG OldValue;
-
- pNullContext = (PTX_CONTEXT)pUrb->context;
- pAd = pNullContext->pAd;
-
-
- // Reset Null frame context flags
- pNullContext->IRPPending = FALSE;
- pNullContext->InUse = FALSE;
- Status = pUrb->status;
-
- // Store BulkOut PipeId
- BulkOutPipeId = pNullContext->BulkOutPipeId;
- pAd->BulkOutDataOneSecCount++;
-
- if (Status == USB_ST_NOERROR)
- {
-#ifdef RALINK_28xx_QA
- if ((ATE_ON(pAd)) && (pAd->ate.bQATxStart == TRUE))
- {
- if (pAd->ate.QID == BulkOutPipeId)
- {
- // Let Rx can have a chance to break in during Tx process,
- // especially for loopback mode in QA ATE.
- // To trade off between tx performance and loopback mode integrity.
- /* Q : Now Rx is handled by tasklet, do we still need this delay ? */
- /* Ans : Even tasklet is used, Rx/Tx < 1 if we do not delay for a while right here. */
- RTMPusecDelay(500);
- pAd->ate.TxDoneCount++;
- pAd->RalinkCounters.KickTxCount++;
- ASSERT(pAd->ate.QID == 0);
- pAd->ate.TxAc0++;
- }
- }
-#endif // RALINK_28xx_QA //
- pAd->BulkOutComplete++;
-
- pAd->Counters8023.GoodTransmits++;
-
- /* Don't worry about the queue is empty or not. This function will check itself. */
- RTMPDeQueuePacket(pAd, TRUE, BulkOutPipeId, MAX_TX_PROCESS);
-
- /* In 28xx, SendTxWaitQueue ==> TxSwQueue */
-/*
- if (pAd->SendTxWaitQueue[BulkOutPipeId].Number > 0)
- {
- RTMPDeQueuePacket(pAd, BulkOutPipeId);
- }
-*/
- }
- else // STATUS_OTHER
- {
- pAd->BulkOutCompleteOther++;
-
- ATEDBGPRINT(RT_DEBUG_ERROR, ("BulkOutDataPacket Failed STATUS_OTHER = 0x%x . \n", Status));
- ATEDBGPRINT(RT_DEBUG_ERROR, (">>BulkOutReq=0x%lx, BulkOutComplete=0x%lx\n", pAd->BulkOutReq, pAd->BulkOutComplete));
-
- if ((!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS)) &&
- (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS)) &&
- (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)) &&
- (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BULKOUT_RESET)))
- {
- RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_BULKOUT_RESET);
- /* In 28xx, RT_OID_USB_RESET_BULK_OUT ==> CMDTHREAD_RESET_BULK_OUT */
- RTUSBEnqueueInternalCmd(pAd, CMDTHREAD_RESET_BULK_OUT, NULL, 0);
- // Check
- BULK_OUT_LOCK(&pAd->BulkOutLock[BulkOutPipeId], IrqFlags);
- pAd->BulkOutPending[BulkOutPipeId] = FALSE;
- pAd->bulkResetPipeid = BulkOutPipeId;
- BULK_OUT_UNLOCK(&pAd->BulkOutLock[BulkOutPipeId], IrqFlags);
- return;
- }
- }
-
-
-
- if (atomic_read(&pAd->BulkOutRemained) > 0)
- {
- atomic_dec(&pAd->BulkOutRemained);
- }
-
- // 1st - Transmit Success
- OldValue = pAd->WlanCounters.TransmittedFragmentCount.u.LowPart;
- pAd->WlanCounters.TransmittedFragmentCount.u.LowPart++;
-
- if (pAd->WlanCounters.TransmittedFragmentCount.u.LowPart < OldValue)
- {
- pAd->WlanCounters.TransmittedFragmentCount.u.HighPart++;
- }
-
- if(((pAd->ContinBulkOut == TRUE ) ||(atomic_read(&pAd->BulkOutRemained) > 0)) && (pAd->ate.Mode & ATE_TXFRAME))
- {
- RTUSB_SET_BULK_FLAG(pAd, fRTUSB_BULK_OUT_DATA_ATE);
- }
- else
- {
- RTUSB_CLEAR_BULK_FLAG(pAd, fRTUSB_BULK_OUT_DATA_ATE);
-#ifdef RALINK_28xx_QA
- pAd->ate.TxStatus = 0;
-#endif // RALINK_28xx_QA //
- }
-
- BULK_OUT_LOCK(&pAd->BulkOutLock[BulkOutPipeId], IrqFlags);
- pAd->BulkOutPending[BulkOutPipeId] = FALSE;
- BULK_OUT_UNLOCK(&pAd->BulkOutLock[BulkOutPipeId], IrqFlags);
-
- // Always call Bulk routine, even reset bulk.
- // The protection of rest bulk should be in BulkOut routine.
- RTUSBKickBulkOut(pAd);
-}
-
-/*
- ========================================================================
-
- Routine Description:
-
- Arguments:
-
- Return Value:
-
- Note:
-
- ========================================================================
-*/
-VOID ATE_RTUSBBulkOutDataPacket(
- IN PRTMP_ADAPTER pAd,
- IN UCHAR BulkOutPipeId)
-{
- PTX_CONTEXT pNullContext = &(pAd->NullContext);
- PURB pUrb;
- int ret = 0;
- unsigned long IrqFlags;
-
-
- ASSERT(BulkOutPipeId == 0);
-
- /* Build up the frame first. */
-// ATESetUpFrame(pAd, 0);
-
- BULK_OUT_LOCK(&pAd->BulkOutLock[BulkOutPipeId], IrqFlags);
-
- if (pAd->BulkOutPending[BulkOutPipeId] == TRUE)
- {
- BULK_OUT_UNLOCK(&pAd->BulkOutLock[BulkOutPipeId], IrqFlags);
- return;
- }
-
- pAd->BulkOutPending[BulkOutPipeId] = TRUE;
- BULK_OUT_UNLOCK(&pAd->BulkOutLock[BulkOutPipeId], IrqFlags);
-
- // Increase Total transmit byte counter
- pAd->RalinkCounters.OneSecTransmittedByteCount += pNullContext->BulkOutSize;
- pAd->RalinkCounters.TransmittedByteCount += pNullContext->BulkOutSize;
-
- // Clear ATE frame bulk out flag
- RTUSB_CLEAR_BULK_FLAG(pAd, fRTUSB_BULK_OUT_DATA_ATE);
-
- // Init Tx context descriptor
- pNullContext->IRPPending = TRUE;
- RTUSBInitTxDesc(pAd, pNullContext, BulkOutPipeId, (usb_complete_t)ATE_RTUSBBulkOutDataPacketComplete);
- pUrb = pNullContext->pUrb;
-
- if((ret = RTUSB_SUBMIT_URB(pUrb))!=0)
- {
- ATEDBGPRINT(RT_DEBUG_ERROR, ("ATE_RTUSBBulkOutDataPacket: Submit Tx URB failed %d\n", ret));
- return;
- }
-
- pAd->BulkOutReq++;
- return;
-
-}
-
-/*
- ========================================================================
-
- Routine Description:
-
- Arguments:
-
- Return Value:
-
- Note:
-
- ========================================================================
-*/
-VOID ATE_RTUSBCancelPendingBulkInIRP(
- IN PRTMP_ADAPTER pAd)
-{
- PRX_CONTEXT pRxContext;
- UINT i;
-
- ATEDBGPRINT(RT_DEBUG_TRACE, ("--->ATE_RTUSBCancelPendingBulkInIRP\n"));
-#if 1
- for ( i = 0; i < (RX_RING_SIZE); i++)
- {
- pRxContext = &(pAd->RxContext[i]);
- if(pRxContext->IRPPending == TRUE)
- {
- RTUSB_UNLINK_URB(pRxContext->pUrb);
- pRxContext->IRPPending = FALSE;
- pRxContext->InUse = FALSE;
- //NdisInterlockedDecrement(&pAd->PendingRx);
- //pAd->PendingRx--;
- }
- }
-#else
- for ( i = 0; i < (RX_RING_SIZE); i++)
- {
- pRxContext = &(pAd->RxContext[i]);
- if(atomic_read(&pRxContext->IrpLock) == IRPLOCK_CANCELABLE)
- {
- RTUSB_UNLINK_URB(pRxContext->pUrb);
- }
- InterlockedExchange(&pRxContext->IrpLock, IRPLOCK_CANCE_START);
- }
-#endif // 1 //
- ATEDBGPRINT(RT_DEBUG_TRACE, ("<---ATE_RTUSBCancelPendingBulkInIRP\n"));
- return;
-}
-#endif // RT2870 //
-
-VOID rt_ee_read_all(PRTMP_ADAPTER pAd, USHORT *Data)
-{
- USHORT i;
- USHORT value;
-
- for (i = 0 ; i < EEPROM_SIZE/2 ; )
- {
- /* "value" is expecially for some compilers... */
- RT28xx_EEPROM_READ16(pAd, i*2, value);
- Data[i] = value;
- i++;
- }
-}
-
-VOID rt_ee_write_all(PRTMP_ADAPTER pAd, USHORT *Data)
-{
- USHORT i;
- USHORT value;
-
- for (i = 0 ; i < EEPROM_SIZE/2 ; )
- {
- /* "value" is expecially for some compilers... */
- value = Data[i];
- RT28xx_EEPROM_WRITE16(pAd, i*2, value);
- i ++;
- }
-}
-#ifdef RALINK_28xx_QA
-VOID ATE_QA_Statistics(
- IN PRTMP_ADAPTER pAd,
- IN PRXWI_STRUC pRxWI,
- IN PRT28XX_RXD_STRUC pRxD,
- IN PHEADER_802_11 pHeader)
-{
- // update counter first
- if (pHeader != NULL)
- {
- if (pHeader->FC.Type == BTYPE_DATA)
- {
- if (pRxD->U2M)
- pAd->ate.U2M++;
- else
- pAd->ate.OtherData++;
- }
- else if (pHeader->FC.Type == BTYPE_MGMT)
- {
- if (pHeader->FC.SubType == SUBTYPE_BEACON)
- pAd->ate.Beacon++;
- else
- pAd->ate.OtherCount++;
- }
- else if (pHeader->FC.Type == BTYPE_CNTL)
- {
- pAd->ate.OtherCount++;
- }
- }
- pAd->ate.RSSI0 = pRxWI->RSSI0;
- pAd->ate.RSSI1 = pRxWI->RSSI1;
- pAd->ate.RSSI2 = pRxWI->RSSI2;
- pAd->ate.SNR0 = pRxWI->SNR0;
- pAd->ate.SNR1 = pRxWI->SNR1;
-}
-
-/* command id with Cmd Type == 0x0008(for 28xx)/0x0005(for iNIC) */
-#define RACFG_CMD_RF_WRITE_ALL 0x0000
-#define RACFG_CMD_E2PROM_READ16 0x0001
-#define RACFG_CMD_E2PROM_WRITE16 0x0002
-#define RACFG_CMD_E2PROM_READ_ALL 0x0003
-#define RACFG_CMD_E2PROM_WRITE_ALL 0x0004
-#define RACFG_CMD_IO_READ 0x0005
-#define RACFG_CMD_IO_WRITE 0x0006
-#define RACFG_CMD_IO_READ_BULK 0x0007
-#define RACFG_CMD_BBP_READ8 0x0008
-#define RACFG_CMD_BBP_WRITE8 0x0009
-#define RACFG_CMD_BBP_READ_ALL 0x000a
-#define RACFG_CMD_GET_COUNTER 0x000b
-#define RACFG_CMD_CLEAR_COUNTER 0x000c
-
-#define RACFG_CMD_RSV1 0x000d
-#define RACFG_CMD_RSV2 0x000e
-#define RACFG_CMD_RSV3 0x000f
-
-#define RACFG_CMD_TX_START 0x0010
-#define RACFG_CMD_GET_TX_STATUS 0x0011
-#define RACFG_CMD_TX_STOP 0x0012
-#define RACFG_CMD_RX_START 0x0013
-#define RACFG_CMD_RX_STOP 0x0014
-#define RACFG_CMD_GET_NOISE_LEVEL 0x0015
-
-#define RACFG_CMD_ATE_START 0x0080
-#define RACFG_CMD_ATE_STOP 0x0081
-
-#define RACFG_CMD_ATE_START_TX_CARRIER 0x0100
-#define RACFG_CMD_ATE_START_TX_CONT 0x0101
-#define RACFG_CMD_ATE_START_TX_FRAME 0x0102
-#define RACFG_CMD_ATE_SET_BW 0x0103
-#define RACFG_CMD_ATE_SET_TX_POWER0 0x0104
-#define RACFG_CMD_ATE_SET_TX_POWER1 0x0105
-#define RACFG_CMD_ATE_SET_FREQ_OFFSET 0x0106
-#define RACFG_CMD_ATE_GET_STATISTICS 0x0107
-#define RACFG_CMD_ATE_RESET_COUNTER 0x0108
-#define RACFG_CMD_ATE_SEL_TX_ANTENNA 0x0109
-#define RACFG_CMD_ATE_SEL_RX_ANTENNA 0x010a
-#define RACFG_CMD_ATE_SET_PREAMBLE 0x010b
-#define RACFG_CMD_ATE_SET_CHANNEL 0x010c
-#define RACFG_CMD_ATE_SET_ADDR1 0x010d
-#define RACFG_CMD_ATE_SET_ADDR2 0x010e
-#define RACFG_CMD_ATE_SET_ADDR3 0x010f
-#define RACFG_CMD_ATE_SET_RATE 0x0110
-#define RACFG_CMD_ATE_SET_TX_FRAME_LEN 0x0111
-#define RACFG_CMD_ATE_SET_TX_FRAME_COUNT 0x0112
-#define RACFG_CMD_ATE_START_RX_FRAME 0x0113
-#define RACFG_CMD_ATE_E2PROM_READ_BULK 0x0114
-#define RACFG_CMD_ATE_E2PROM_WRITE_BULK 0x0115
-#define RACFG_CMD_ATE_IO_WRITE_BULK 0x0116
-#define RACFG_CMD_ATE_BBP_READ_BULK 0x0117
-#define RACFG_CMD_ATE_BBP_WRITE_BULK 0x0118
-#define RACFG_CMD_ATE_RF_READ_BULK 0x0119
-#define RACFG_CMD_ATE_RF_WRITE_BULK 0x011a
-
-
-
-#define A2Hex(_X, _p) \
-{ \
- UCHAR *p; \
- _X = 0; \
- p = _p; \
- while (((*p >= 'a') && (*p <= 'f')) || ((*p >= 'A') && (*p <= 'F')) || ((*p >= '0') && (*p <= '9'))) \
- { \
- if ((*p >= 'a') && (*p <= 'f')) \
- _X = _X * 16 + *p - 87; \
- else if ((*p >= 'A') && (*p <= 'F')) \
- _X = _X * 16 + *p - 55; \
- else if ((*p >= '0') && (*p <= '9')) \
- _X = _X * 16 + *p - 48; \
- p++; \
- } \
-}
-
-
-static VOID memcpy_exl(PRTMP_ADAPTER pAd, UCHAR *dst, UCHAR *src, ULONG len);
-static VOID memcpy_exs(PRTMP_ADAPTER pAd, UCHAR *dst, UCHAR *src, ULONG len);
-static VOID RTMP_IO_READ_BULK(PRTMP_ADAPTER pAd, UCHAR *dst, UCHAR *src, UINT32 len);
-
-#define LEN_OF_ARG 16
-
-VOID RtmpDoAte(
- IN PRTMP_ADAPTER pAdapter,
- IN struct iwreq *wrq)
-{
- unsigned short Command_Id;
- struct ate_racfghdr *pRaCfg;
- INT Status = NDIS_STATUS_SUCCESS;
-
-
-
- if((pRaCfg = kmalloc(sizeof(struct ate_racfghdr), GFP_KERNEL)) == NULL)
- {
- Status = -EINVAL;
- return;
- }
-
- NdisZeroMemory(pRaCfg, sizeof(struct ate_racfghdr));
-
- if (copy_from_user((PUCHAR)pRaCfg, wrq->u.data.pointer, wrq->u.data.length))
- {
- Status = -EFAULT;
- kfree(pRaCfg);
- return;
- }
-
-
- Command_Id = ntohs(pRaCfg->command_id);
-
- ATEDBGPRINT(RT_DEBUG_TRACE,("\n%s: Command_Id = 0x%04x !\n", __func__, Command_Id));
-
- switch (Command_Id)
- {
- // We will get this command when QA starts.
- case RACFG_CMD_ATE_START:
- {
- ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_START\n"));
-
- // prepare feedback as soon as we can to avoid QA timeout.
- pRaCfg->length = htons(2);
- pRaCfg->status = htons(0);
-
- wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
- + sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
- + sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
- ATEDBGPRINT(RT_DEBUG_TRACE, ("wrq->u.data.length = %d\n", wrq->u.data.length));
-
- if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
- {
- ATEDBGPRINT(RT_DEBUG_TRACE, ("copy_to_user() fail in case RACFG_CMD_ATE_START\n"));
- Status = -EFAULT;
- }
- else
- {
- ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_START is done !\n"));
- }
- Set_ATE_Proc(pAdapter, "ATESTART");
- }
- break;
-
- // We will get this command either QA is closed or ated is killed by user.
- case RACFG_CMD_ATE_STOP:
- {
- INT32 ret;
-
- ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_STOP\n"));
-
- // Distinguish this command came from QA(via ated)
- // or ate daemon according to the existence of pid in payload.
- // No need to prepare feedback if this cmd came directly from ate daemon.
- pRaCfg->length = ntohs(pRaCfg->length);
-
- if (pRaCfg->length == sizeof(pAdapter->ate.AtePid))
- {
- // This command came from QA.
- // Get the pid of ATE daemon.
- memcpy((UCHAR *)&pAdapter->ate.AtePid,
- (&pRaCfg->data[0]) - 2/* == &(pRaCfg->status) */,
- sizeof(pAdapter->ate.AtePid));
-
- // prepare feedback as soon as we can to avoid QA timeout.
- pRaCfg->length = htons(2);
- pRaCfg->status = htons(0);
-
- wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
- + sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
- + sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
- ATEDBGPRINT(RT_DEBUG_TRACE, ("wrq->u.data.length = %d\n", wrq->u.data.length));
-
- if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
- {
- ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_STOP\n"));
- Status = -EFAULT;
- }
-
- //
- // kill ATE daemon when leaving ATE mode.
- // We must kill ATE daemon first before setting ATESTOP,
- // or Microsoft will report sth. wrong.
- ret = KILL_THREAD_PID(pAdapter->ate.AtePid, SIGTERM, 1);
- if (ret)
- {
- ATEDBGPRINT(RT_DEBUG_ERROR, ("%s: unable to signal thread\n", pAdapter->net_dev->name));
- }
- }
-
- // AP might have in ATE_STOP mode due to cmd from QA.
- if (ATE_ON(pAdapter))
- {
- // Someone has killed ate daemon while QA GUI is still open.
- Set_ATE_Proc(pAdapter, "ATESTOP");
- ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_AP_START is done !\n"));
- }
- }
- break;
-
- case RACFG_CMD_RF_WRITE_ALL:
- {
- UINT32 R1, R2, R3, R4;
- USHORT channel;
-
- memcpy(&R1, pRaCfg->data-2, 4);
- memcpy(&R2, pRaCfg->data+2, 4);
- memcpy(&R3, pRaCfg->data+6, 4);
- memcpy(&R4, pRaCfg->data+10, 4);
- memcpy(&channel, pRaCfg->data+14, 2);
-
- pAdapter->LatchRfRegs.R1 = ntohl(R1);
- pAdapter->LatchRfRegs.R2 = ntohl(R2);
- pAdapter->LatchRfRegs.R3 = ntohl(R3);
- pAdapter->LatchRfRegs.R4 = ntohl(R4);
- pAdapter->LatchRfRegs.Channel = ntohs(channel);
-
- RTMP_RF_IO_WRITE32(pAdapter, pAdapter->LatchRfRegs.R1);
- RTMP_RF_IO_WRITE32(pAdapter, pAdapter->LatchRfRegs.R2);
- RTMP_RF_IO_WRITE32(pAdapter, pAdapter->LatchRfRegs.R3);
- RTMP_RF_IO_WRITE32(pAdapter, pAdapter->LatchRfRegs.R4);
-
- // prepare feedback
- pRaCfg->length = htons(2);
- pRaCfg->status = htons(0);
-
- wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
- + sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
- + sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
- ATEDBGPRINT(RT_DEBUG_TRACE, ("wrq->u.data.length = %d\n", wrq->u.data.length));
- if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
- {
- ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_RF_WRITE_ALL\n"));
- Status = -EFAULT;
- }
- else
- {
- ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_RF_WRITE_ALL is done !\n"));
- }
- }
- break;
-
- case RACFG_CMD_E2PROM_READ16:
- {
- USHORT offset, value, tmp;
-
- offset = ntohs(pRaCfg->status);
- /* "tmp" is expecially for some compilers... */
- RT28xx_EEPROM_READ16(pAdapter, offset, tmp);
- value = tmp;
- value = htons(value);
-
- ATEDBGPRINT(RT_DEBUG_TRACE,("EEPROM Read offset = 0x%04x, value = 0x%04x\n", offset, value));
-
- // prepare feedback
- pRaCfg->length = htons(4);
- pRaCfg->status = htons(0);
- memcpy(pRaCfg->data, &value, 2);
-
- wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
- + sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
- + sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
- ATEDBGPRINT(RT_DEBUG_TRACE, ("sizeof(struct ate_racfghdr) = %d\n", sizeof(struct ate_racfghdr)));
- ATEDBGPRINT(RT_DEBUG_TRACE, ("wrq->u.data.length = %d\n", wrq->u.data.length));
-
- if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
- {
- ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_E2PROM_READ16\n"));
- Status = -EFAULT;
- }
- else
- {
- ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_E2PROM_READ16 is done !\n"));
- }
- }
- break;
-
- case RACFG_CMD_E2PROM_WRITE16:
- {
- USHORT offset, value;
-
- offset = ntohs(pRaCfg->status);
- memcpy(&value, pRaCfg->data, 2);
- value = ntohs(value);
- RT28xx_EEPROM_WRITE16(pAdapter, offset, value);
-
- // prepare feedback
- pRaCfg->length = htons(2);
- pRaCfg->status = htons(0);
- wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
- + sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
- + sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
- if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
- {
- ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_E2PROM_WRITE16\n"));
- Status = -EFAULT;
- }
- else
- {
- ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_E2PROM_WRITE16 is done !\n"));
- }
- }
- break;
-
- case RACFG_CMD_E2PROM_READ_ALL:
- {
- USHORT buffer[EEPROM_SIZE/2];
-
- rt_ee_read_all(pAdapter,(USHORT *)buffer);
- memcpy_exs(pAdapter, pRaCfg->data, (UCHAR *)buffer, EEPROM_SIZE);
-
- // prepare feedback
- pRaCfg->length = htons(2+EEPROM_SIZE);
- pRaCfg->status = htons(0);
- wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
- + sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
- + sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
- if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
- {
- ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_E2PROM_READ_ALL\n"));
- Status = -EFAULT;
- }
- else
- {
- ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_E2PROM_READ_ALL is done !\n"));
- }
- }
- break;
-
- case RACFG_CMD_E2PROM_WRITE_ALL:
- {
- USHORT buffer[EEPROM_SIZE/2];
-
- NdisZeroMemory((UCHAR *)buffer, EEPROM_SIZE);
- memcpy_exs(pAdapter, (UCHAR *)buffer, (UCHAR *)&pRaCfg->status, EEPROM_SIZE);
- rt_ee_write_all(pAdapter,(USHORT *)buffer);
-
- // prepare feedback
- pRaCfg->length = htons(2);
- pRaCfg->status = htons(0);
- wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
- + sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
- + sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
- if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
- {
- ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_E2PROM_WRITE_ALL\n"));
- Status = -EFAULT;
- }
- else
- {
- ATEDBGPRINT(RT_DEBUG_ERROR, ("RACFG_CMD_E2PROM_WRITE_ALL is done !\n"));
- }
-
- }
- break;
-
- case RACFG_CMD_IO_READ:
- {
- UINT32 offset;
- UINT32 value;
-
- memcpy(&offset, &pRaCfg->status, 4);
- offset = ntohl(offset);
-
- // We do not need the base address.
- // So just extract the offset out.
- offset &= 0x0000FFFF;
- RTMP_IO_READ32(pAdapter, offset, &value);
- value = htonl(value);
-
- // prepare feedback
- pRaCfg->length = htons(6);
- pRaCfg->status = htons(0);
- memcpy(pRaCfg->data, &value, 4);
-
- wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
- + sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
- + sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
- if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
- {
- ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_IO_READ\n"));
- Status = -EFAULT;
- }
- else
- {
- ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_IO_READ is done !\n"));
- }
- }
- break;
-
- case RACFG_CMD_IO_WRITE:
- {
- UINT32 offset, value;
-
- memcpy(&offset, pRaCfg->data-2, 4);
- memcpy(&value, pRaCfg->data+2, 4);
-
- offset = ntohl(offset);
-
- // We do not need the base address.
- // So just extract out the offset.
- offset &= 0x0000FFFF;
- value = ntohl(value);
- ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_IO_WRITE: offset = %x, value = %x\n", offset, value));
- RTMP_IO_WRITE32(pAdapter, offset, value);
-
- // prepare feedback
- pRaCfg->length = htons(2);
- pRaCfg->status = htons(0);
- wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
- + sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
- + sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
- if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
- {
- ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_IO_WRITE\n"));
- Status = -EFAULT;
- }
- else
- {
- ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_IO_WRITE is done !\n"));
- }
- }
- break;
-
- case RACFG_CMD_IO_READ_BULK:
- {
- UINT32 offset;
- USHORT len;
-
- memcpy(&offset, &pRaCfg->status, 4);
- offset = ntohl(offset);
-
- // We do not need the base address.
- // So just extract the offset.
- offset &= 0x0000FFFF;
- memcpy(&len, pRaCfg->data+2, 2);
- len = ntohs(len);
-
- if (len > 371)
- {
- ATEDBGPRINT(RT_DEBUG_TRACE,("len is too large, make it smaller\n"));
- pRaCfg->length = htons(2);
- pRaCfg->status = htons(1);
- break;
- }
-
- RTMP_IO_READ_BULK(pAdapter, pRaCfg->data, (UCHAR *)offset, len*4);// unit in four bytes
-
- // prepare feedback
- pRaCfg->length = htons(2+len*4);// unit in four bytes
- pRaCfg->status = htons(0);
- wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
- + sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
- + sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
- if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
- {
- ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_IO_READ_BULK\n"));
- Status = -EFAULT;
- }
- else
- {
- ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_IO_READ_BULK is done !\n"));
- }
- }
- break;
-
- case RACFG_CMD_BBP_READ8:
- {
- USHORT offset;
- UCHAR value;
-
- value = 0;
- offset = ntohs(pRaCfg->status);
-
- if (ATE_ON(pAdapter))
- {
- ATE_BBP_IO_READ8_BY_REG_ID(pAdapter, offset, &value);
- }
- else
- {
- RTMP_BBP_IO_READ8_BY_REG_ID(pAdapter, offset, &value);
- }
- // prepare feedback
- pRaCfg->length = htons(3);
- pRaCfg->status = htons(0);
- pRaCfg->data[0] = value;
-
- ATEDBGPRINT(RT_DEBUG_TRACE,("BBP value = %x\n", value));
-
- wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
- + sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
- + sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
- if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
- {
- ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_BBP_READ8\n"));
- Status = -EFAULT;
- }
- else
- {
- ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_BBP_READ8 is done !\n"));
- }
- }
- break;
- case RACFG_CMD_BBP_WRITE8:
- {
- USHORT offset;
- UCHAR value;
-
- offset = ntohs(pRaCfg->status);
- memcpy(&value, pRaCfg->data, 1);
-
- if (ATE_ON(pAdapter))
- {
- ATE_BBP_IO_WRITE8_BY_REG_ID(pAdapter, offset, value);
- }
- else
- {
- RTMP_BBP_IO_WRITE8_BY_REG_ID(pAdapter, offset, value);
- }
-
- if ((offset == BBP_R1) || (offset == BBP_R3))
- {
- SyncTxRxConfig(pAdapter, offset, value);
- }
-
- // prepare feedback
- pRaCfg->length = htons(2);
- pRaCfg->status = htons(0);
- wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
- + sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
- + sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
- if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
- {
- ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_BBP_WRITE8\n"));
- Status = -EFAULT;
- }
- else
- {
- ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_BBP_WRITE8 is done !\n"));
- }
- }
- break;
-
- case RACFG_CMD_BBP_READ_ALL:
- {
- USHORT j;
-
- for (j = 0; j < 137; j++)
- {
- pRaCfg->data[j] = 0;
-
- if (ATE_ON(pAdapter))
- {
- ATE_BBP_IO_READ8_BY_REG_ID(pAdapter, j, &pRaCfg->data[j]);
- }
- else
- {
- RTMP_BBP_IO_READ8_BY_REG_ID(pAdapter, j, &pRaCfg->data[j]);
- }
- }
-
- // prepare feedback
- pRaCfg->length = htons(2+137);
- pRaCfg->status = htons(0);
-
- wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
- + sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
- + sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
- if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
- {
- ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_BBP_READ_ALL\n"));
- Status = -EFAULT;
- }
- else
- {
- ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_BBP_READ_ALL is done !\n"));
- }
- }
-
- break;
-
- case RACFG_CMD_ATE_E2PROM_READ_BULK:
- {
- USHORT offset;
- USHORT len;
- USHORT buffer[EEPROM_SIZE/2];
-
- offset = ntohs(pRaCfg->status);
- memcpy(&len, pRaCfg->data, 2);
- len = ntohs(len);
-
- rt_ee_read_all(pAdapter,(USHORT *)buffer);
- if (offset + len <= EEPROM_SIZE)
- memcpy_exs(pAdapter, pRaCfg->data, (UCHAR *)buffer+offset, len);
- else
- ATEDBGPRINT(RT_DEBUG_ERROR, ("exceed EEPROM size\n"));
-
- // prepare feedback
- pRaCfg->length = htons(2+len);
- pRaCfg->status = htons(0);
- wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
- + sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
- + sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
- if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
- {
- ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_E2PROM_READ_BULK\n"));
- Status = -EFAULT;
- }
- else
- {
- ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_E2PROM_READ_BULK is done !\n"));
- }
-
- }
- break;
-
- case RACFG_CMD_ATE_E2PROM_WRITE_BULK:
- {
- USHORT offset;
- USHORT len;
- USHORT buffer[EEPROM_SIZE/2];
-
- offset = ntohs(pRaCfg->status);
- memcpy(&len, pRaCfg->data, 2);
- len = ntohs(len);
-
- rt_ee_read_all(pAdapter,(USHORT *)buffer);
- memcpy_exs(pAdapter, (UCHAR *)buffer + offset, (UCHAR *)pRaCfg->data + 2, len);
- rt_ee_write_all(pAdapter,(USHORT *)buffer);
-
- // prepare feedback
- pRaCfg->length = htons(2);
- pRaCfg->status = htons(0);
- wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
- + sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
- + sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
- if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
- {
- ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_E2PROM_WRITE_BULK\n"));
- Status = -EFAULT;
- }
- else
- {
- ATEDBGPRINT(RT_DEBUG_ERROR, ("RACFG_CMD_ATE_E2PROM_WRITE_BULK is done !\n"));
- }
-
- }
- break;
-
- case RACFG_CMD_ATE_IO_WRITE_BULK:
- {
- UINT32 offset, i, value;
- USHORT len;
-
- memcpy(&offset, &pRaCfg->status, 4);
- offset = ntohl(offset);
- memcpy(&len, pRaCfg->data+2, 2);
- len = ntohs(len);
-
- for (i = 0; i < len; i += 4)
- {
- memcpy_exl(pAdapter, (UCHAR *)&value, pRaCfg->data+4+i, 4);
- printk("Write %x %x\n", offset + i, value);
- RTMP_IO_WRITE32(pAdapter, (offset +i) & 0xffff, value);
- }
-
- // prepare feedback
- pRaCfg->length = htons(2);
- pRaCfg->status = htons(0);
- wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
- + sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
- + sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
- if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
- {
- ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_IO_WRITE_BULK\n"));
- Status = -EFAULT;
- }
- else
- {
- ATEDBGPRINT(RT_DEBUG_ERROR, ("RACFG_CMD_ATE_IO_WRITE_BULK is done !\n"));
- }
-
- }
- break;
-
- case RACFG_CMD_ATE_BBP_READ_BULK:
- {
- USHORT offset;
- USHORT len;
- USHORT j;
-
- offset = ntohs(pRaCfg->status);
- memcpy(&len, pRaCfg->data, 2);
- len = ntohs(len);
-
-
- for (j = offset; j < (offset+len); j++)
- {
- pRaCfg->data[j - offset] = 0;
-
- if (pAdapter->ate.Mode == ATE_STOP)
- {
- RTMP_BBP_IO_READ8_BY_REG_ID(pAdapter, j, &pRaCfg->data[j - offset]);
- }
- else
- {
- ATE_BBP_IO_READ8_BY_REG_ID(pAdapter, j, &pRaCfg->data[j - offset]);
- }
- }
-
- // prepare feedback
- pRaCfg->length = htons(2+len);
- pRaCfg->status = htons(0);
- wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
- + sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
- + sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
- if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
- {
- ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_BBP_READ_BULK\n"));
- Status = -EFAULT;
- }
- else
- {
- ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_BBP_READ_BULK is done !\n"));
- }
-
- }
- break;
-
- case RACFG_CMD_ATE_BBP_WRITE_BULK:
- {
- USHORT offset;
- USHORT len;
- USHORT j;
- UCHAR *value;
-
- offset = ntohs(pRaCfg->status);
- memcpy(&len, pRaCfg->data, 2);
- len = ntohs(len);
-
- for (j = offset; j < (offset+len); j++)
- {
- value = pRaCfg->data + 2 + (j - offset);
- if (pAdapter->ate.Mode == ATE_STOP)
- {
- RTMP_BBP_IO_WRITE8_BY_REG_ID(pAdapter, j, *value);
- }
- else
- {
- ATE_BBP_IO_WRITE8_BY_REG_ID(pAdapter, j, *value);
- }
- }
-
- // prepare feedback
- pRaCfg->length = htons(2);
- pRaCfg->status = htons(0);
- wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
- + sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
- + sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
- if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
- {
- ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_BBP_WRITE_BULK\n"));
- Status = -EFAULT;
- }
- else
- {
- ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_BBP_WRITE_BULK is done !\n"));
- }
- }
- break;
-
-#ifdef CONFIG_RALINK_RT3052
- case RACFG_CMD_ATE_RF_READ_BULK:
- {
- USHORT offset;
- USHORT len;
- USHORT j;
-
- offset = ntohs(pRaCfg->status);
- memcpy(&len, pRaCfg->data, 2);
- len = ntohs(len);
-
- for (j = offset; j < (offset+len); j++)
- {
- pRaCfg->data[j - offset] = 0;
- RT30xxReadRFRegister(pAdapter, j, &pRaCfg->data[j - offset]);
- }
-
- // prepare feedback
- pRaCfg->length = htons(2+len);
- pRaCfg->status = htons(0);
- wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
- + sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
- + sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
- if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
- {
- ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_RF_READ_BULK\n"));
- Status = -EFAULT;
- }
- else
- {
- ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_RF_READ_BULK is done !\n"));
- }
-
- }
- break;
-
- case RACFG_CMD_ATE_RF_WRITE_BULK:
- {
- USHORT offset;
- USHORT len;
- USHORT j;
- UCHAR *value;
-
- offset = ntohs(pRaCfg->status);
- memcpy(&len, pRaCfg->data, 2);
- len = ntohs(len);
-
- for (j = offset; j < (offset+len); j++)
- {
- value = pRaCfg->data + 2 + (j - offset);
- RT30xxWriteRFRegister(pAdapter, j, *value);
- }
-
- // prepare feedback
- pRaCfg->length = htons(2);
- pRaCfg->status = htons(0);
- wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
- + sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
- + sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
- if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
- {
- ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_RF_WRITE_BULK\n"));
- Status = -EFAULT;
- }
- else
- {
- ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_RF_WRITE_BULK is done !\n"));
- }
-
- }
- break;
-#endif
-
-
- case RACFG_CMD_GET_NOISE_LEVEL:
- {
- UCHAR channel;
- INT32 buffer[3][10];/* 3 : RxPath ; 10 : no. of per rssi samples */
-
- channel = (ntohs(pRaCfg->status) & 0x00FF);
- CalNoiseLevel(pAdapter, channel, buffer);
- memcpy_exl(pAdapter, (UCHAR *)pRaCfg->data, (UCHAR *)&(buffer[0][0]), (sizeof(INT32)*3*10));
-
- // prepare feedback
- pRaCfg->length = htons(2 + (sizeof(INT32)*3*10));
- pRaCfg->status = htons(0);
- wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
- + sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
- + sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
- if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
- {
- ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_GET_NOISE_LEVEL\n"));
- Status = -EFAULT;
- }
- else
- {
- ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_GET_NOISE_LEVEL is done !\n"));
- }
- }
- break;
-
- case RACFG_CMD_GET_COUNTER:
- {
- memcpy_exl(pAdapter, &pRaCfg->data[0], (UCHAR *)&pAdapter->ate.U2M, 4);
- memcpy_exl(pAdapter, &pRaCfg->data[4], (UCHAR *)&pAdapter->ate.OtherData, 4);
- memcpy_exl(pAdapter, &pRaCfg->data[8], (UCHAR *)&pAdapter->ate.Beacon, 4);
- memcpy_exl(pAdapter, &pRaCfg->data[12], (UCHAR *)&pAdapter->ate.OtherCount, 4);
- memcpy_exl(pAdapter, &pRaCfg->data[16], (UCHAR *)&pAdapter->ate.TxAc0, 4);
- memcpy_exl(pAdapter, &pRaCfg->data[20], (UCHAR *)&pAdapter->ate.TxAc1, 4);
- memcpy_exl(pAdapter, &pRaCfg->data[24], (UCHAR *)&pAdapter->ate.TxAc2, 4);
- memcpy_exl(pAdapter, &pRaCfg->data[28], (UCHAR *)&pAdapter->ate.TxAc3, 4);
- memcpy_exl(pAdapter, &pRaCfg->data[32], (UCHAR *)&pAdapter->ate.TxHCCA, 4);
- memcpy_exl(pAdapter, &pRaCfg->data[36], (UCHAR *)&pAdapter->ate.TxMgmt, 4);
- memcpy_exl(pAdapter, &pRaCfg->data[40], (UCHAR *)&pAdapter->ate.RSSI0, 4);
- memcpy_exl(pAdapter, &pRaCfg->data[44], (UCHAR *)&pAdapter->ate.RSSI1, 4);
- memcpy_exl(pAdapter, &pRaCfg->data[48], (UCHAR *)&pAdapter->ate.RSSI2, 4);
- memcpy_exl(pAdapter, &pRaCfg->data[52], (UCHAR *)&pAdapter->ate.SNR0, 4);
- memcpy_exl(pAdapter, &pRaCfg->data[56], (UCHAR *)&pAdapter->ate.SNR1, 4);
-
- pRaCfg->length = htons(2+60);
- pRaCfg->status = htons(0);
- wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
- + sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
- + sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
- if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
- {
- ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_GET_COUNTER\n"));
- Status = -EFAULT;
- }
- else
- {
- ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_GET_COUNTER is done !\n"));
- }
- }
- break;
-
- case RACFG_CMD_CLEAR_COUNTER:
- {
- pAdapter->ate.U2M = 0;
- pAdapter->ate.OtherData = 0;
- pAdapter->ate.Beacon = 0;
- pAdapter->ate.OtherCount = 0;
- pAdapter->ate.TxAc0 = 0;
- pAdapter->ate.TxAc1 = 0;
- pAdapter->ate.TxAc2 = 0;
- pAdapter->ate.TxAc3 = 0;
- pAdapter->ate.TxHCCA = 0;
- pAdapter->ate.TxMgmt = 0;
- pAdapter->ate.TxDoneCount = 0;
-
- pRaCfg->length = htons(2);
- pRaCfg->status = htons(0);
-
- wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
- + sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
- + sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
- if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
- {
- ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_CLEAR_COUNTER\n"));
- Status = -EFAULT;
- }
- else
- {
- ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_CLEAR_COUNTER is done !\n"));
- }
- }
-
- break;
-
- case RACFG_CMD_TX_START:
- {
- USHORT *p;
- USHORT err = 1;
- UCHAR Bbp22Value = 0, Bbp24Value = 0;
-
- if ((pAdapter->ate.TxStatus != 0) && (pAdapter->ate.Mode & ATE_TXFRAME))
- {
- ATEDBGPRINT(RT_DEBUG_TRACE,("Ate Tx is already running, to run next Tx, you must stop it first\n"));
- err = 2;
- goto TX_START_ERROR;
- }
- else if ((pAdapter->ate.TxStatus != 0) && !(pAdapter->ate.Mode & ATE_TXFRAME))
- {
- int i = 0;
-
- while ((i++ < 10) && (pAdapter->ate.TxStatus != 0))
- {
- RTMPusecDelay(5000);
- }
-
- // force it to stop
- pAdapter->ate.TxStatus = 0;
- pAdapter->ate.TxDoneCount = 0;
- //pAdapter->ate.Repeat = 0;
- pAdapter->ate.bQATxStart = FALSE;
- }
-
- // If pRaCfg->length == 0, this "RACFG_CMD_TX_START" is for Carrier test or Carrier Suppression.
- if (ntohs(pRaCfg->length) != 0)
- {
- // Get frame info
-#ifdef RT2870
- NdisMoveMemory(&pAdapter->ate.TxInfo, pRaCfg->data - 2, 4);
-#ifdef RT_BIG_ENDIAN
- RTMPDescriptorEndianChange((PUCHAR) &pAdapter->ate.TxInfo, TYPE_TXINFO);
-#endif // RT_BIG_ENDIAN //
-#endif // RT2870 //
-
- NdisMoveMemory(&pAdapter->ate.TxWI, pRaCfg->data + 2, 16);
-#ifdef RT_BIG_ENDIAN
- RTMPWIEndianChange((PUCHAR)&pAdapter->ate.TxWI, TYPE_TXWI);
-#endif // RT_BIG_ENDIAN //
-
- NdisMoveMemory(&pAdapter->ate.TxCount, pRaCfg->data + 18, 4);
- pAdapter->ate.TxCount = ntohl(pAdapter->ate.TxCount);
-
- p = (USHORT *)(&pRaCfg->data[22]);
- //p = pRaCfg->data + 22;
- // always use QID_AC_BE
- pAdapter->ate.QID = 0;
- p = (USHORT *)(&pRaCfg->data[24]);
- //p = pRaCfg->data + 24;
- pAdapter->ate.HLen = ntohs(*p);
-
- if (pAdapter->ate.HLen > 32)
- {
- ATEDBGPRINT(RT_DEBUG_ERROR,("pAdapter->ate.HLen > 32\n"));
- err = 3;
- goto TX_START_ERROR;
- }
-
- NdisMoveMemory(&pAdapter->ate.Header, pRaCfg->data + 26, pAdapter->ate.HLen);
-
-
- pAdapter->ate.PLen = ntohs(pRaCfg->length) - (pAdapter->ate.HLen + 28);
-
- if (pAdapter->ate.PLen > 32)
- {
- ATEDBGPRINT(RT_DEBUG_ERROR,("pAdapter->ate.PLen > 32\n"));
- err = 4;
- goto TX_START_ERROR;
- }
-
- NdisMoveMemory(&pAdapter->ate.Pattern, pRaCfg->data + 26 + pAdapter->ate.HLen, pAdapter->ate.PLen);
- pAdapter->ate.DLen = pAdapter->ate.TxWI.MPDUtotalByteCount - pAdapter->ate.HLen;
- }
-
- ATE_BBP_IO_READ8_BY_REG_ID(pAdapter, BBP_R22, &Bbp22Value);
-
- switch (Bbp22Value)
- {
- case BBP22_TXFRAME:
- {
- if (pAdapter->ate.TxCount == 0)
- {
- }
- ATEDBGPRINT(RT_DEBUG_TRACE,("START TXFRAME\n"));
- pAdapter->ate.bQATxStart = TRUE;
- Set_ATE_Proc(pAdapter, "TXFRAME");
- }
- break;
-
- case BBP22_TXCONT_OR_CARRSUPP:
- {
- ATEDBGPRINT(RT_DEBUG_TRACE,("BBP22_TXCONT_OR_CARRSUPP\n"));
- ATE_BBP_IO_READ8_BY_REG_ID(pAdapter, 24, &Bbp24Value);
-
- switch (Bbp24Value)
- {
- case BBP24_TXCONT:
- {
- ATEDBGPRINT(RT_DEBUG_TRACE,("START TXCONT\n"));
- pAdapter->ate.bQATxStart = TRUE;
- Set_ATE_Proc(pAdapter, "TXCONT");
- }
- break;
-
- case BBP24_CARRSUPP:
- {
- ATEDBGPRINT(RT_DEBUG_TRACE,("START TXCARRSUPP\n"));
- pAdapter->ate.bQATxStart = TRUE;
- pAdapter->ate.Mode |= ATE_TXCARRSUPP;
- }
- break;
-
- default:
- {
- ATEDBGPRINT(RT_DEBUG_ERROR,("Unknown Start TX subtype !"));
- }
- break;
- }
- }
- break;
-
- case BBP22_TXCARR:
- {
- ATEDBGPRINT(RT_DEBUG_TRACE,("START TXCARR\n"));
- pAdapter->ate.bQATxStart = TRUE;
- Set_ATE_Proc(pAdapter, "TXCARR");
- }
- break;
-
- default:
- {
- ATEDBGPRINT(RT_DEBUG_ERROR,("Unknown Start TX subtype !"));
- }
- break;
- }
-
- if (pAdapter->ate.bQATxStart == TRUE)
- {
- // prepare feedback
- pRaCfg->length = htons(2);
- pRaCfg->status = htons(0);
-
- wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
- + sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
- + sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
- if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
- {
- ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() was failed in case RACFG_CMD_TX_START\n"));
- Status = -EFAULT;
- }
- else
- {
- ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_TX_START is done !\n"));
- }
- break;
- }
-
-TX_START_ERROR:
- // prepare feedback
- pRaCfg->length = htons(2);
- pRaCfg->status = htons(err);
-
- wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
- + sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
- + sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
- if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
- {
- ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_TX_START\n"));
- Status = -EFAULT;
- }
- else
- {
- ATEDBGPRINT(RT_DEBUG_TRACE, ("feedback of TX_START_ERROR is done !\n"));
- }
- }
- break;
-
- case RACFG_CMD_GET_TX_STATUS:
- {
- UINT32 count;
-
- // prepare feedback
- pRaCfg->length = htons(6);
- pRaCfg->status = htons(0);
- count = htonl(pAdapter->ate.TxDoneCount);
- NdisMoveMemory(pRaCfg->data, &count, 4);
- wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
- + sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
- + sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
- if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
- {
- ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_GET_TX_STATUS\n"));
- Status = -EFAULT;
- }
- else
- {
- ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_GET_TX_STATUS is done !\n"));
- }
- }
- break;
-
- case RACFG_CMD_TX_STOP:
- {
- ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_TX_STOP\n"));
-
- Set_ATE_Proc(pAdapter, "TXSTOP");
-
- // prepare feedback
- pRaCfg->length = htons(2);
- pRaCfg->status = htons(0);
- wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
- + sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
- + sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
- if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
- {
- ATEDBGPRINT(RT_DEBUG_TRACE, ("copy_to_user() fail in case RACFG_CMD_TX_STOP\n"));
- Status = -EFAULT;
- }
- else
- {
- ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_TX_STOP is done !\n"));
- }
- }
- break;
-
- case RACFG_CMD_RX_START:
- {
- ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_RX_START\n"));
-
- pAdapter->ate.bQARxStart = TRUE;
- Set_ATE_Proc(pAdapter, "RXFRAME");
-
- // prepare feedback
- pRaCfg->length = htons(2);
- pRaCfg->status = htons(0);
- wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
- + sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
- + sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
- if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
- {
- ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_RX_START\n"));
- Status = -EFAULT;
- }
- else
- {
- ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_RX_START is done !\n"));
- }
- }
- break;
-
- case RACFG_CMD_RX_STOP:
- {
- ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_RX_STOP\n"));
-
- Set_ATE_Proc(pAdapter, "RXSTOP");
-
- // prepare feedback
- pRaCfg->length = htons(2);
- pRaCfg->status = htons(0);
- wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
- + sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
- + sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
- if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
- {
- ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_RX_STOP\n"));
- Status = -EFAULT;
- }
- else
- {
- ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_RX_STOP is done !\n"));
- }
- }
- break;
-
- /* The following cases are for new ATE GUI(not QA). */
- /*==================================================*/
- case RACFG_CMD_ATE_START_TX_CARRIER:
- {
- ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_START_TX_CARRIER\n"));
-
- Set_ATE_Proc(pAdapter, "TXCARR");
-
- pRaCfg->length = htons(2);
- pRaCfg->status = htons(0);
-
- wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
- + sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
- + sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
- ATEDBGPRINT(RT_DEBUG_TRACE, ("wrq->u.data.length = %d\n", wrq->u.data.length));
-
- if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
- {
- ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_START_TX_CARRIER\n"));
- Status = -EFAULT;
- }
- else
- {
- ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_START_TX_CARRIER is done !\n"));
- }
- }
- break;
-
- case RACFG_CMD_ATE_START_TX_CONT:
- {
- ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_START_TX_CONT\n"));
-
- Set_ATE_Proc(pAdapter, "TXCONT");
-
- pRaCfg->length = htons(2);
- pRaCfg->status = htons(0);
-
- wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
- + sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
- + sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
- ATEDBGPRINT(RT_DEBUG_TRACE, ("wrq->u.data.length = %d\n", wrq->u.data.length));
-
- if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
- {
- ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_START_TX_CONT\n"));
- Status = -EFAULT;
- }
- else
- {
- ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_START_TX_CONT is done !\n"));
- }
- }
- break;
-
- case RACFG_CMD_ATE_START_TX_FRAME:
- {
- ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_START_TX_FRAME\n"));
-
- Set_ATE_Proc(pAdapter, "TXFRAME");
-
- pRaCfg->length = htons(2);
- pRaCfg->status = htons(0);
-
- wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
- + sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
- + sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
- ATEDBGPRINT(RT_DEBUG_TRACE, ("wrq->u.data.length = %d\n", wrq->u.data.length));
-
- if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
- {
- ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_START_TX_FRAME\n"));
- Status = -EFAULT;
- }
- else
- {
- ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_START_TX_FRAME is done !\n"));
- }
- }
- break;
-
- case RACFG_CMD_ATE_SET_BW:
- {
- SHORT value = 0;
- UCHAR str[LEN_OF_ARG];
-
- NdisZeroMemory(str, LEN_OF_ARG);
-
- ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_SET_BW\n"));
-
- memcpy((PUCHAR)&value, (PUCHAR)&(pRaCfg->status), 2);
- value = ntohs(value);
- sprintf((PCHAR)str, "%d", value);
-
- Set_ATE_TX_BW_Proc(pAdapter, str);
-
- // prepare feedback
- pRaCfg->length = htons(2);
- pRaCfg->status = htons(0);
- wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
- + sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
- + sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
- if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
- {
- ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_SET_BW\n"));
- Status = -EFAULT;
- }
- else
- {
- ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_SET_BW is done !\n"));
- }
- }
- break;
-
- case RACFG_CMD_ATE_SET_TX_POWER0:
- {
- SHORT value = 0;
- UCHAR str[LEN_OF_ARG];
-
- NdisZeroMemory(str, LEN_OF_ARG);
-
- ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_SET_TX_POWER0\n"));
-
- memcpy((PUCHAR)&value, (PUCHAR)&(pRaCfg->status), 2);
- value = ntohs(value);
- sprintf((PCHAR)str, "%d", value);
- Set_ATE_TX_POWER0_Proc(pAdapter, str);
-
- // prepare feedback
- pRaCfg->length = htons(2);
- pRaCfg->status = htons(0);
- wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
- + sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
- + sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
- if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
- {
- ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_SET_TX_POWER0\n"));
- Status = -EFAULT;
- }
- else
- {
- ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_SET_TX_POWER0 is done !\n"));
- }
- }
- break;
-
- case RACFG_CMD_ATE_SET_TX_POWER1:
- {
- SHORT value = 0;
- UCHAR str[LEN_OF_ARG];
-
- NdisZeroMemory(str, LEN_OF_ARG);
-
- ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_SET_TX_POWER1\n"));
-
- memcpy((PUCHAR)&value, (PUCHAR)&(pRaCfg->status), 2);
- value = ntohs(value);
- sprintf((PCHAR)str, "%d", value);
- Set_ATE_TX_POWER1_Proc(pAdapter, str);
-
- // prepare feedback
- pRaCfg->length = htons(2);
- pRaCfg->status = htons(0);
- wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
- + sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
- + sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
- if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
- {
- ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_SET_TX_POWER1\n"));
- Status = -EFAULT;
- }
- else
- {
- ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_SET_TX_POWER1 is done !\n"));
- }
- }
- break;
-
- case RACFG_CMD_ATE_SET_FREQ_OFFSET:
- {
- SHORT value = 0;
- UCHAR str[LEN_OF_ARG];
-
- NdisZeroMemory(str, LEN_OF_ARG);
-
- ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_SET_FREQ_OFFSET\n"));
-
- memcpy((PUCHAR)&value, (PUCHAR)&(pRaCfg->status), 2);
- value = ntohs(value);
- sprintf((PCHAR)str, "%d", value);
- Set_ATE_TX_FREQOFFSET_Proc(pAdapter, str);
-
- // prepare feedback
- pRaCfg->length = htons(2);
- pRaCfg->status = htons(0);
- wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
- + sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
- + sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
- if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
- {
- ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_SET_FREQ_OFFSET\n"));
- Status = -EFAULT;
- }
- else
- {
- ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_SET_FREQ_OFFSET is done !\n"));
- }
- }
- break;
-
- case RACFG_CMD_ATE_GET_STATISTICS:
- {
- ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_GET_STATISTICS\n"));
-
- memcpy_exl(pAdapter, &pRaCfg->data[0], (UCHAR *)&pAdapter->ate.TxDoneCount, 4);
- memcpy_exl(pAdapter, &pRaCfg->data[4], (UCHAR *)&pAdapter->WlanCounters.RetryCount.u.LowPart, 4);
- memcpy_exl(pAdapter, &pRaCfg->data[8], (UCHAR *)&pAdapter->WlanCounters.FailedCount.u.LowPart, 4);
- memcpy_exl(pAdapter, &pRaCfg->data[12], (UCHAR *)&pAdapter->WlanCounters.RTSSuccessCount.u.LowPart, 4);
- memcpy_exl(pAdapter, &pRaCfg->data[16], (UCHAR *)&pAdapter->WlanCounters.RTSFailureCount.u.LowPart, 4);
- memcpy_exl(pAdapter, &pRaCfg->data[20], (UCHAR *)&pAdapter->WlanCounters.ReceivedFragmentCount.QuadPart, 4);
- memcpy_exl(pAdapter, &pRaCfg->data[24], (UCHAR *)&pAdapter->WlanCounters.FCSErrorCount.u.LowPart, 4);
- memcpy_exl(pAdapter, &pRaCfg->data[28], (UCHAR *)&pAdapter->Counters8023.RxNoBuffer, 4);
- memcpy_exl(pAdapter, &pRaCfg->data[32], (UCHAR *)&pAdapter->WlanCounters.FrameDuplicateCount.u.LowPart, 4);
- memcpy_exl(pAdapter, &pRaCfg->data[36], (UCHAR *)&pAdapter->RalinkCounters.OneSecFalseCCACnt, 4);
-
- if (pAdapter->ate.RxAntennaSel == 0)
- {
- INT32 RSSI0 = 0;
- INT32 RSSI1 = 0;
- INT32 RSSI2 = 0;
-
- RSSI0 = (INT32)(pAdapter->ate.LastRssi0 - pAdapter->BbpRssiToDbmDelta);
- RSSI1 = (INT32)(pAdapter->ate.LastRssi1 - pAdapter->BbpRssiToDbmDelta);
- RSSI2 = (INT32)(pAdapter->ate.LastRssi2 - pAdapter->BbpRssiToDbmDelta);
- memcpy_exl(pAdapter, &pRaCfg->data[40], (UCHAR *)&RSSI0, 4);
- memcpy_exl(pAdapter, &pRaCfg->data[44], (UCHAR *)&RSSI1, 4);
- memcpy_exl(pAdapter, &pRaCfg->data[48], (UCHAR *)&RSSI2, 4);
- pRaCfg->length = htons(2+52);
- }
- else
- {
- INT32 RSSI0 = 0;
-
- RSSI0 = (INT32)(pAdapter->ate.LastRssi0 - pAdapter->BbpRssiToDbmDelta);
- memcpy_exl(pAdapter, &pRaCfg->data[40], (UCHAR *)&RSSI0, 4);
- pRaCfg->length = htons(2+44);
- }
- pRaCfg->status = htons(0);
- wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
- + sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
- + sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
- if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
- {
- ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_GET_STATISTICS\n"));
- Status = -EFAULT;
- }
- else
- {
- ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_GET_STATISTICS is done !\n"));
- }
- }
- break;
-
- case RACFG_CMD_ATE_RESET_COUNTER:
- {
- SHORT value = 1;
- UCHAR str[LEN_OF_ARG];
-
- NdisZeroMemory(str, LEN_OF_ARG);
-
- ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_RESET_COUNTER\n"));
-
- sprintf((PCHAR)str, "%d", value);
- Set_ResetStatCounter_Proc(pAdapter, str);
-
- pAdapter->ate.TxDoneCount = 0;
-
- pRaCfg->length = htons(2);
- pRaCfg->status = htons(0);
-
- wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
- + sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
- + sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
- if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
- {
- ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_RESET_COUNTER\n"));
- Status = -EFAULT;
- }
- else
- {
- ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_RESET_COUNTER is done !\n"));
- }
- }
-
- break;
-
- case RACFG_CMD_ATE_SEL_TX_ANTENNA:
- {
- SHORT value = 0;
- UCHAR str[LEN_OF_ARG];
-
- NdisZeroMemory(str, LEN_OF_ARG);
-
- ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_SEL_TX_ANTENNA\n"));
-
- memcpy((PUCHAR)&value, (PUCHAR)&(pRaCfg->status), 2);
- value = ntohs(value);
- sprintf((PCHAR)str, "%d", value);
- Set_ATE_TX_Antenna_Proc(pAdapter, str);
-
- // prepare feedback
- pRaCfg->length = htons(2);
- pRaCfg->status = htons(0);
- wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
- + sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
- + sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
- if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
- {
- ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_SEL_TX_ANTENNA\n"));
- Status = -EFAULT;
- }
- else
- {
- ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_SEL_TX_ANTENNA is done !\n"));
- }
- }
- break;
-
- case RACFG_CMD_ATE_SEL_RX_ANTENNA:
- {
- SHORT value = 0;
- UCHAR str[LEN_OF_ARG];
-
- NdisZeroMemory(str, LEN_OF_ARG);
-
- ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_SEL_RX_ANTENNA\n"));
-
- memcpy((PUCHAR)&value, (PUCHAR)&(pRaCfg->status), 2);
- value = ntohs(value);
- sprintf((PCHAR)str, "%d", value);
- Set_ATE_RX_Antenna_Proc(pAdapter, str);
-
- // prepare feedback
- pRaCfg->length = htons(2);
- pRaCfg->status = htons(0);
- wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
- + sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
- + sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
- if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
- {
- ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_SEL_RX_ANTENNA\n"));
- Status = -EFAULT;
- }
- else
- {
- ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_SEL_RX_ANTENNA is done !\n"));
- }
- }
- break;
-
- case RACFG_CMD_ATE_SET_PREAMBLE:
- {
- SHORT value = 0;
- UCHAR str[LEN_OF_ARG];
-
- NdisZeroMemory(str, LEN_OF_ARG);
-
- ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_SET_PREAMBLE\n"));
-
- memcpy((PUCHAR)&value, (PUCHAR)&(pRaCfg->status), 2);
- value = ntohs(value);
- sprintf((PCHAR)str, "%d", value);
- Set_ATE_TX_MODE_Proc(pAdapter, str);
-
- // prepare feedback
- pRaCfg->length = htons(2);
- pRaCfg->status = htons(0);
- wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
- + sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
- + sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
- if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
- {
- ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_SET_PREAMBLE\n"));
- Status = -EFAULT;
- }
- else
- {
- ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_SET_PREAMBLE is done !\n"));
- }
- }
- break;
-
- case RACFG_CMD_ATE_SET_CHANNEL:
- {
- SHORT value = 0;
- UCHAR str[LEN_OF_ARG];
-
- NdisZeroMemory(str, LEN_OF_ARG);
-
- ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_SET_CHANNEL\n"));
-
- memcpy((PUCHAR)&value, (PUCHAR)&(pRaCfg->status), 2);
- value = ntohs(value);
- sprintf((PCHAR)str, "%d", value);
- Set_ATE_CHANNEL_Proc(pAdapter, str);
-
- // prepare feedback
- pRaCfg->length = htons(2);
- pRaCfg->status = htons(0);
- wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
- + sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
- + sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
- if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
- {
- ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_SET_CHANNEL\n"));
- Status = -EFAULT;
- }
- else
- {
- ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_SET_CHANNEL is done !\n"));
- }
- }
- break;
-
- case RACFG_CMD_ATE_SET_ADDR1:
- {
- ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_SET_ADDR1\n"));
-
- // Addr is an array of UCHAR,
- // so no need to perform endian swap.
- memcpy(pAdapter->ate.Addr1, (PUCHAR)(pRaCfg->data - 2), MAC_ADDR_LEN);
-
- // prepare feedback
- pRaCfg->length = htons(2);
- pRaCfg->status = htons(0);
- wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
- + sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
- + sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
- if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
- {
- ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_SET_ADDR1\n"));
- Status = -EFAULT;
- }
- else
- {
- ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_SET_ADDR1 is done !\n (ADDR1 = %2X:%2X:%2X:%2X:%2X:%2X)\n", pAdapter->ate.Addr1[0],
- pAdapter->ate.Addr1[1], pAdapter->ate.Addr1[2], pAdapter->ate.Addr1[3], pAdapter->ate.Addr1[4], pAdapter->ate.Addr1[5]));
- }
- }
- break;
-
- case RACFG_CMD_ATE_SET_ADDR2:
- {
- ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_SET_ADDR2\n"));
-
- // Addr is an array of UCHAR,
- // so no need to perform endian swap.
- memcpy(pAdapter->ate.Addr2, (PUCHAR)(pRaCfg->data - 2), MAC_ADDR_LEN);
-
- // prepare feedback
- pRaCfg->length = htons(2);
- pRaCfg->status = htons(0);
- wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
- + sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
- + sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
- if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
- {
- ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_SET_ADDR2\n"));
- Status = -EFAULT;
- }
- else
- {
- ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_SET_ADDR2 is done !\n (ADDR2 = %2X:%2X:%2X:%2X:%2X:%2X)\n", pAdapter->ate.Addr2[0],
- pAdapter->ate.Addr2[1], pAdapter->ate.Addr2[2], pAdapter->ate.Addr2[3], pAdapter->ate.Addr2[4], pAdapter->ate.Addr2[5]));
- }
- }
- break;
-
- case RACFG_CMD_ATE_SET_ADDR3:
- {
- ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_SET_ADDR3\n"));
-
- // Addr is an array of UCHAR,
- // so no need to perform endian swap.
- memcpy(pAdapter->ate.Addr3, (PUCHAR)(pRaCfg->data - 2), MAC_ADDR_LEN);
-
- // prepare feedback
- pRaCfg->length = htons(2);
- pRaCfg->status = htons(0);
- wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
- + sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
- + sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
- if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
- {
- ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_SET_ADDR3\n"));
- Status = -EFAULT;
- }
- else
- {
- ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_SET_ADDR3 is done !\n (ADDR3 = %2X:%2X:%2X:%2X:%2X:%2X)\n", pAdapter->ate.Addr3[0],
- pAdapter->ate.Addr3[1], pAdapter->ate.Addr3[2], pAdapter->ate.Addr3[3], pAdapter->ate.Addr3[4], pAdapter->ate.Addr3[5]));
- }
- }
- break;
-
- case RACFG_CMD_ATE_SET_RATE:
- {
- SHORT value = 0;
- UCHAR str[LEN_OF_ARG];
-
- NdisZeroMemory(str, LEN_OF_ARG);
-
- ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_SET_RATE\n"));
-
- memcpy((PUCHAR)&value, (PUCHAR)&(pRaCfg->status), 2);
- value = ntohs(value);
- sprintf((PCHAR)str, "%d", value);
- Set_ATE_TX_MCS_Proc(pAdapter, str);
-
- // prepare feedback
- pRaCfg->length = htons(2);
- pRaCfg->status = htons(0);
- wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
- + sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
- + sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
- if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
- {
- ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_SET_RATE\n"));
- Status = -EFAULT;
- }
- else
- {
- ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_SET_RATE is done !\n"));
- }
- }
- break;
-
- case RACFG_CMD_ATE_SET_TX_FRAME_LEN:
- {
- SHORT value = 0;
- UCHAR str[LEN_OF_ARG];
-
- NdisZeroMemory(str, LEN_OF_ARG);
-
- ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_SET_TX_FRAME_LEN\n"));
-
- memcpy((PUCHAR)&value, (PUCHAR)&(pRaCfg->status), 2);
- value = ntohs(value);
- sprintf((PCHAR)str, "%d", value);
- Set_ATE_TX_LENGTH_Proc(pAdapter, str);
-
- // prepare feedback
- pRaCfg->length = htons(2);
- pRaCfg->status = htons(0);
- wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
- + sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
- + sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
- if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
- {
- ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_SET_TX_FRAME_LEN\n"));
- Status = -EFAULT;
- }
- else
- {
- ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_SET_TX_FRAME_LEN is done !\n"));
- }
- }
- break;
-
- case RACFG_CMD_ATE_SET_TX_FRAME_COUNT:
- {
- USHORT value = 0;
- UCHAR str[LEN_OF_ARG];
-
- NdisZeroMemory(str, LEN_OF_ARG);
-
- ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_SET_TX_FRAME_COUNT\n"));
-
- memcpy((PUCHAR)&value, (PUCHAR)&(pRaCfg->status), 2);
- value = ntohs(value);
- {
- sprintf((PCHAR)str, "%d", value);
- Set_ATE_TX_COUNT_Proc(pAdapter, str);
- }
-
- // prepare feedback
- pRaCfg->length = htons(2);
- pRaCfg->status = htons(0);
- wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
- + sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
- + sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
- if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
- {
- ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_SET_TX_FRAME_COUNT\n"));
- Status = -EFAULT;
- }
- else
- {
- ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_SET_TX_FRAME_COUNT is done !\n"));
- }
- }
- break;
-
- case RACFG_CMD_ATE_START_RX_FRAME:
- {
- ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_RX_START\n"));
-
- Set_ATE_Proc(pAdapter, "RXFRAME");
-
- // prepare feedback
- pRaCfg->length = htons(2);
- pRaCfg->status = htons(0);
- wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
- + sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
- + sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
- if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
- {
- ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_RX_START\n"));
- Status = -EFAULT;
- }
- else
- {
- ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_RX_START is done !\n"));
- }
- }
- break;
- default:
- break;
- }
- ASSERT(pRaCfg != NULL);
- if (pRaCfg != NULL)
- {
- kfree(pRaCfg);
- }
- return;
-}
-
-VOID BubbleSort(INT32 n, INT32 a[])
-{
- INT32 k, j, temp;
-
- for (k = n-1; k>0; k--)
- {
- for (j = 0; j<k; j++)
- {
- if(a[j] > a[j+1])
- {
- temp = a[j];
- a[j]=a[j+1];
- a[j+1]=temp;
- }
- }
- }
-}
-
-VOID CalNoiseLevel(PRTMP_ADAPTER pAd, UCHAR channel, INT32 RSSI[3][10])
-{
- INT32 RSSI0, RSSI1, RSSI2;
- CHAR Rssi0Offset, Rssi1Offset, Rssi2Offset;
- UCHAR BbpR50Rssi0 = 0, BbpR51Rssi1 = 0, BbpR52Rssi2 = 0;
- UCHAR Org_BBP66value = 0, Org_BBP69value = 0, Org_BBP70value = 0, data = 0;
- USHORT LNA_Gain = 0;
- INT32 j = 0;
- UCHAR Org_Channel = pAd->ate.Channel;
- USHORT GainValue = 0, OffsetValue = 0;
-
- ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R66, &Org_BBP66value);
- ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R69, &Org_BBP69value);
- ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R70, &Org_BBP70value);
-
- //**********************************************************************
- // Read the value of LNA gain and Rssi offset
- //**********************************************************************
- RT28xx_EEPROM_READ16(pAd, EEPROM_LNA_OFFSET, GainValue);
-
- // for Noise Level
- if (channel <= 14)
- {
- LNA_Gain = GainValue & 0x00FF;
-
- RT28xx_EEPROM_READ16(pAd, EEPROM_RSSI_BG_OFFSET, OffsetValue);
- Rssi0Offset = OffsetValue & 0x00FF;
- Rssi1Offset = (OffsetValue & 0xFF00) >> 8;
- RT28xx_EEPROM_READ16(pAd, (EEPROM_RSSI_BG_OFFSET + 2)/* 0x48 */, OffsetValue);
- Rssi2Offset = OffsetValue & 0x00FF;
- }
- else
- {
- LNA_Gain = (GainValue & 0xFF00) >> 8;
-
- RT28xx_EEPROM_READ16(pAd, EEPROM_RSSI_A_OFFSET, OffsetValue);
- Rssi0Offset = OffsetValue & 0x00FF;
- Rssi1Offset = (OffsetValue & 0xFF00) >> 8;
- RT28xx_EEPROM_READ16(pAd, (EEPROM_RSSI_A_OFFSET + 2)/* 0x4C */, OffsetValue);
- Rssi2Offset = OffsetValue & 0x00FF;
- }
- //**********************************************************************
- {
- pAd->ate.Channel = channel;
- ATEAsicSwitchChannel(pAd);
- mdelay(5);
-
- data = 0x10;
- ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, data);
- data = 0x40;
- ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R69, data);
- data = 0x40;
- ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R70, data);
- mdelay(5);
-
- // Start Rx
- pAd->ate.bQARxStart = TRUE;
- Set_ATE_Proc(pAd, "RXFRAME");
-
- mdelay(5);
-
- for (j = 0; j < 10; j++)
- {
- ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R50, &BbpR50Rssi0);
- ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R51, &BbpR51Rssi1);
- ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R52, &BbpR52Rssi2);
-
- mdelay(10);
-
- // Calculate RSSI 0
- if (BbpR50Rssi0 == 0)
- {
- RSSI0 = -100;
- }
- else
- {
- RSSI0 = (INT32)(-12 - BbpR50Rssi0 - LNA_Gain - Rssi0Offset);
- }
- RSSI[0][j] = RSSI0;
-
- if ( pAd->Antenna.field.RxPath >= 2 ) // 2R
- {
- // Calculate RSSI 1
- if (BbpR51Rssi1 == 0)
- {
- RSSI1 = -100;
- }
- else
- {
- RSSI1 = (INT32)(-12 - BbpR51Rssi1 - LNA_Gain - Rssi1Offset);
- }
- RSSI[1][j] = RSSI1;
- }
-
- if ( pAd->Antenna.field.RxPath >= 3 ) // 3R
- {
- // Calculate RSSI 2
- if (BbpR52Rssi2 == 0)
- RSSI2 = -100;
- else
- RSSI2 = (INT32)(-12 - BbpR52Rssi2 - LNA_Gain - Rssi2Offset);
-
- RSSI[2][j] = RSSI2;
- }
- }
-
- // Stop Rx
- Set_ATE_Proc(pAd, "RXSTOP");
-
- mdelay(5);
-
-#if 0// Debug Message................
- ate_print("\n**********************************************************\n");
- ate_print("Noise Level: Channel %d\n", channel);
- ate_print("RSSI0 = %d, %d, %d, %d, %d, %d, %d, %d, %d, %d\n",
- RSSI[0][0], RSSI[0][1], RSSI[0][2],
- RSSI[0][3], RSSI[0][4], RSSI[0][5],
- RSSI[0][6], RSSI[0][7], RSSI[0][8],
- RSSI[0][9]);
- if ( pAd->Antenna.field.RxPath >= 2 ) // 2R
- {
- ate_print("RSSI1 = %d, %d, %d, %d, %d, %d, %d, %d, %d, %d\n",
- RSSI[1][0], RSSI[1][1], RSSI[1][2],
- RSSI[1][3], RSSI[1][4], RSSI[1][5],
- RSSI[1][6], RSSI[1][7], RSSI[1][8],
- RSSI[1][9]);
- }
- if ( pAd->Antenna.field.RxPath >= 3 ) // 3R
- {
- ate_print("RSSI2 = %d, %d, %d, %d, %d, %d, %d, %d, %d, %d\n",
- RSSI[2][0], RSSI[2][1], RSSI[2][2],
- RSSI[2][3], RSSI[2][4], RSSI[2][5],
- RSSI[2][6], RSSI[2][7], RSSI[2][8],
- RSSI[2][9]);
- }
-#endif // 0 //
- BubbleSort(10, RSSI[0]); // 1R
-
- if ( pAd->Antenna.field.RxPath >= 2 ) // 2R
- {
- BubbleSort(10, RSSI[1]);
- }
-
- if ( pAd->Antenna.field.RxPath >= 3 ) // 3R
- {
- BubbleSort(10, RSSI[2]);
- }
-
-#if 0// Debug Message................
- ate_print("\nAfter Sorting....Channel %d\n", channel);
- ate_print("RSSI0 = %d, %d, %d, %d, %d, %d, %d, %d, %d, %d\n",
- RSSI[0][0], RSSI[0][1], RSSI[0][2],
- RSSI[0][3], RSSI[0][4], RSSI[0][5],
- RSSI[0][6], RSSI[0][7], RSSI[0][8],
- RSSI[0][9]);
- if ( pAd->Antenna.field.RxPath >= 2 ) // 2R
- {
- ate_print("RSSI1 = %d, %d, %d, %d, %d, %d, %d, %d, %d, %d\n",
- RSSI[1][0], RSSI[1][1], RSSI[1][2],
- RSSI[1][3], RSSI[1][4], RSSI[1][5],
- RSSI[1][6], RSSI[1][7], RSSI[1][8],
- RSSI[1][9]);
- }
- if ( pAd->Antenna.field.RxPath >= 3 ) // 3R
- {
- ate_print("RSSI2 = %d, %d, %d, %d, %d, %d, %d, %d, %d, %d\n",
- RSSI[2][0], RSSI[2][1], RSSI[2][2],
- RSSI[2][3], RSSI[2][4], RSSI[2][5],
- RSSI[2][6], RSSI[2][7], RSSI[2][8],
- RSSI[2][9]);
- }
- ate_print("**********************************************************\n");
-#endif // 0 //
- }
-
- pAd->ate.Channel = Org_Channel;
- ATEAsicSwitchChannel(pAd);
-
- // Restore original value
- ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, Org_BBP66value);
- ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R69, Org_BBP69value);
- ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R70, Org_BBP70value);
-
- return;
-}
-
-BOOLEAN SyncTxRxConfig(PRTMP_ADAPTER pAd, USHORT offset, UCHAR value)
-{
- UCHAR tmp = 0, bbp_data = 0;
-
- if (ATE_ON(pAd))
- {
- ATE_BBP_IO_READ8_BY_REG_ID(pAd, offset, &bbp_data);
- }
- else
- {
- RTMP_BBP_IO_READ8_BY_REG_ID(pAd, offset, &bbp_data);
- }
-
- /* confirm again */
- ASSERT(bbp_data == value);
-
- switch(offset)
- {
- case BBP_R1:
- /* Need to sync. tx configuration with legacy ATE. */
- tmp = (bbp_data & ((1 << 4) | (1 << 3))/* 0x18 */) >> 3;
- switch(tmp)
- {
- /* The BBP R1 bit[4:3] = 2 :: Both DACs will be used by QA. */
- case 2:
- /* All */
- pAd->ate.TxAntennaSel = 0;
- break;
- /* The BBP R1 bit[4:3] = 0 :: DAC 0 will be used by QA. */
- case 0:
- /* Antenna one */
- pAd->ate.TxAntennaSel = 1;
- break;
- /* The BBP R1 bit[4:3] = 1 :: DAC 1 will be used by QA. */
- case 1:
- /* Antenna two */
- pAd->ate.TxAntennaSel = 2;
- break;
- default:
- DBGPRINT(RT_DEBUG_TRACE, ("%s -- Sth. wrong! : return FALSE; \n", __func__));
- return FALSE;
- }
- break;/* case BBP_R1 */
-
- case BBP_R3:
- /* Need to sync. rx configuration with legacy ATE. */
- tmp = (bbp_data & ((1 << 1) | (1 << 0))/* 0x03 */);
- switch(tmp)
- {
- /* The BBP R3 bit[1:0] = 3 :: All ADCs will be used by QA. */
- case 3:
- /* All */
- pAd->ate.RxAntennaSel = 0;
- break;
- /* The BBP R3 bit[1:0] = 0 :: ADC 0 will be used by QA, */
- /* unless the BBP R3 bit[4:3] = 2 */
- case 0:
- /* Antenna one */
- pAd->ate.RxAntennaSel = 1;
- tmp = ((bbp_data & ((1 << 4) | (1 << 3))/* 0x03 */) >> 3);
- if (tmp == 2)// 3R
- {
- /* Default : All ADCs will be used by QA */
- pAd->ate.RxAntennaSel = 0;
- }
- break;
- /* The BBP R3 bit[1:0] = 1 :: ADC 1 will be used by QA. */
- case 1:
- /* Antenna two */
- pAd->ate.RxAntennaSel = 2;
- break;
- /* The BBP R3 bit[1:0] = 2 :: ADC 2 will be used by QA. */
- case 2:
- /* Antenna three */
- pAd->ate.RxAntennaSel = 3;
- break;
- default:
- DBGPRINT(RT_DEBUG_ERROR, ("%s -- Impossible! : return FALSE; \n", __func__));
- return FALSE;
- }
- break;/* case BBP_R3 */
-
- default:
- DBGPRINT(RT_DEBUG_ERROR, ("%s -- Sth. wrong! : return FALSE; \n", __func__));
- return FALSE;
-
- }
- return TRUE;
-}
-
-static VOID memcpy_exl(PRTMP_ADAPTER pAd, UCHAR *dst, UCHAR *src, ULONG len)
-{
- ULONG i, Value = 0;
- ULONG *pDst, *pSrc;
- UCHAR *p8;
-
- p8 = src;
- pDst = (ULONG *) dst;
- pSrc = (ULONG *) src;
-
- for (i = 0 ; i < (len/4); i++)
- {
- /* For alignment issue, we need a variable "Value". */
- memmove(&Value, pSrc, 4);
- Value = htonl(Value);
- memmove(pDst, &Value, 4);
- pDst++;
- pSrc++;
- }
- if ((len % 4) != 0)
- {
- /* wish that it will never reach here */
- memmove(&Value, pSrc, (len % 4));
- Value = htonl(Value);
- memmove(pDst, &Value, (len % 4));
- }
-}
-
-static VOID memcpy_exs(PRTMP_ADAPTER pAd, UCHAR *dst, UCHAR *src, ULONG len)
-{
- ULONG i;
- UCHAR *pDst, *pSrc;
-
- pDst = dst;
- pSrc = src;
-
- for (i = 0; i < (len/2); i++)
- {
- memmove(pDst, pSrc, 2);
- *((USHORT *)pDst) = htons(*((USHORT *)pDst));
- pDst+=2;
- pSrc+=2;
- }
-
- if ((len % 2) != 0)
- {
- memmove(pDst, pSrc, 1);
- }
-}
-
-static VOID RTMP_IO_READ_BULK(PRTMP_ADAPTER pAd, UCHAR *dst, UCHAR *src, UINT32 len)
-{
- UINT32 i, Value;
- UINT32 *pDst, *pSrc;
-
- pDst = (UINT32 *) dst;
- pSrc = (UINT32 *) src;
-
- for (i = 0 ; i < (len/4); i++)
- {
- RTMP_IO_READ32(pAd, (ULONG)pSrc, &Value);
- Value = htonl(Value);
- memmove(pDst, &Value, 4);
- pDst++;
- pSrc++;
- }
- return;
-}
-
-// TODO:
-#if 0
-/* These work only when RALINK_ATE is defined */
-INT Set_TxStart_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg)
-{
- ULONG value = simple_strtol(arg, 0, 10);
- UCHAR buffer[26] = {0x88, 0x02, 0x2c, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x11, 0x22, 0x33, 0x44, 0x55, 0x00, 0x55, 0x44, 0x33, 0x22, 0x11, 0xc0, 0x22, 0x00, 0x00};
- POS_COOKIE pObj;
-
- if (pAd->ate.TxStatus != 0)
- return FALSE;
-
- pAd->ate.TxInfo = 0x04000000;
- bzero(&pAd->ate.TxWI, sizeof(TXWI_STRUC));
- pAd->ate.TxWI.PHYMODE = 0;// MODE_CCK
- pAd->ate.TxWI.MPDUtotalByteCount = 1226;
- pAd->ate.TxWI.MCS = 3;
- //pAd->ate.Mode = ATE_START;
- pAd->ate.Mode |= ATE_TXFRAME;
- pAd->ate.TxCount = value;
- pAd->ate.QID = 0;
- pAd->ate.HLen = 26;
- pAd->ate.PLen = 0;
- pAd->ate.DLen = 1200;
- memcpy(pAd->ate.Header, buffer, 26);
- pAd->ate.bQATxStart = TRUE;
- //pObj = (POS_COOKIE) pAd->OS_Cookie;
- //tasklet_hi_schedule(&pObj->AteTxTask);
- return TRUE;
-}
-#endif /* end of #if 0 */
-
-INT Set_TxStop_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg)
-{
- ATEDBGPRINT(RT_DEBUG_TRACE,("Set_TxStop_Proc\n"));
-
- if (Set_ATE_Proc(pAd, "TXSTOP"))
- {
- return TRUE;
-}
- else
- {
- return FALSE;
- }
-}
-
-INT Set_RxStop_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg)
-{
- ATEDBGPRINT(RT_DEBUG_TRACE,("Set_RxStop_Proc\n"));
-
- if (Set_ATE_Proc(pAd, "RXSTOP"))
- {
- return TRUE;
-}
- else
- {
- return FALSE;
- }
-}
-
-#if 0
-INT Set_EEWrite_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg)
-{
- USHORT offset = 0, value;
- PUCHAR p2 = arg;
-
- while((*p2 != ':') && (*p2 != '\0'))
- {
- p2++;
- }
-
- if (*p2 == ':')
- {
- A2Hex(offset, arg);
- A2Hex(value, p2+ 1);
- }
- else
- {
- A2Hex(value, arg);
- }
-
- if (offset >= EEPROM_SIZE)
- {
- ate_print("Offset can not exceed EEPROM_SIZE( == 0x%04x)\n", EEPROM_SIZE);
- return FALSE;
- }
-
- RTMP_EEPROM_WRITE16(pAd, offset, value);
-
- return TRUE;
-}
-
-INT Set_BBPRead_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg)
-{
- UCHAR value = 0, offset;
-
- A2Hex(offset, arg);
-
- if (ATE_ON(pAd))
- {
- ATE_BBP_IO_READ8_BY_REG_ID(pAd, offset, &value);
- }
- else
- {
- RTMP_BBP_IO_READ8_BY_REG_ID(pAd, offset, &value);
- }
-
- ate_print("%x\n", value);
-
- return TRUE;
-}
-
-
-INT Set_BBPWrite_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg)
-{
- USHORT offset = 0;
- PUCHAR p2 = arg;
- UCHAR value;
-
- while((*p2 != ':') && (*p2 != '\0'))
- {
- p2++;
- }
-
- if (*p2 == ':')
- {
- A2Hex(offset, arg);
- A2Hex(value, p2+ 1);
- }
- else
- {
- A2Hex(value, arg);
- }
-
- if (ATE_ON(pAd))
- {
- ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, offset, value);
- }
- else
- {
- RTNP_BBP_IO_WRITE8_BY_REG_ID(pAd, offset, value);
- }
-
- return TRUE;
-}
-
-INT Set_RFWrite_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg)
-{
- PUCHAR p2, p3, p4;
- ULONG R1, R2, R3, R4;
-
- p2 = arg;
-
- while((*p2 != ':') && (*p2 != '\0'))
- {
- p2++;
- }
-
- if (*p2 != ':')
- return FALSE;
-
- p3 = p2 + 1;
-
- while((*p3 != ':') && (*p3 != '\0'))
- {
- p3++;
- }
-
- if (*p3 != ':')
- return FALSE;
-
- p4 = p3 + 1;
-
- while((*p4 != ':') && (*p4 != '\0'))
- {
- p4++;
- }
-
- if (*p4 != ':')
- return FALSE;
-
-
- A2Hex(R1, arg);
- A2Hex(R2, p2 + 1);
- A2Hex(R3, p3 + 1);
- A2Hex(R4, p4 + 1);
-
- RTMP_RF_IO_WRITE32(pAd, R1);
- RTMP_RF_IO_WRITE32(pAd, R2);
- RTMP_RF_IO_WRITE32(pAd, R3);
- RTMP_RF_IO_WRITE32(pAd, R4);
-
- return TRUE;
-}
-#endif // end of #if 0 //
-#endif // RALINK_28xx_QA //
-
-#endif // RALINK_ATE //
-
projects / GitHub / LineageOS / android_kernel_samsung_universal7580.git / commitdiff