ALSA: azt3328: cosmetics, minor updates

- correct samples to be POSIX shell compatible
- add logging of jiffies value in _pointer()
- several comments
- cleanup

Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

diff --git a/sound/pci/azt3328.c b/sound/pci/azt3328.c
index 2f3cacbd5528da80cccca5791147d6f516dcdf82..006f8c0ffb566ca0de9f24303059df03ab00664b 100644 (file)
--- a/sound/pci/azt3328.c
+++ b/sound/pci/azt3328.c
@@ -1,6 +1,6 @@
 /*
  *  azt3328.c - driver for Aztech AZF3328 based soundcards (e.g. PCI168).
- *  Copyright (C) 2002, 2005 - 2009 by Andreas Mohr <andi AT lisas.de>
+ *  Copyright (C) 2002, 2005 - 2010 by Andreas Mohr <andi AT lisas.de>
  *
  *  Framework borrowed from Bart Hartgers's als4000.c.
  *  Driver developed on PCI168 AP(W) version (PCI rev. 10, subsystem ID 1801),
@@ -201,14 +201,15 @@ MODULE_SUPPORTED_DEVICE("{{Aztech,AZF3328}}");
 
 /* === Debug settings ===
   Further diagnostic functionality than the settings below
-  does not need to be provided, since one can easily write a bash script
+  does not need to be provided, since one can easily write a POSIX shell script
   to dump the card's I/O ports (those listed in lspci -v -v):
-  function dump()
+  dump()
   {
     local descr=$1; local addr=$2; local count=$3
 
     echo "${descr}: ${count} @ ${addr}:"
-    dd if=/dev/port skip=$[${addr}] count=${count} bs=1 2>/dev/null| hexdump -C
+    dd if=/dev/port skip=`printf %d ${addr}` count=${count} bs=1 \
+      2>/dev/null| hexdump -C
   }
   and then use something like
   "dump joy200 0x200 8", "dump mpu388 0x388 4", "dump joy 0xb400 8",
@@ -216,14 +217,14 @@ MODULE_SUPPORTED_DEVICE("{{Aztech,AZF3328}}");
   possibly within a "while true; do ... sleep 1; done" loop.
   Tweaking ports could be done using
   VALSTRING="`printf "%02x" $value`"
-  printf "\x""$VALSTRING"|dd of=/dev/port seek=$[${addr}] bs=1 2>/dev/null
+  printf "\x""$VALSTRING"|dd of=/dev/port seek=`printf %d ${addr}` bs=1 \
+    2>/dev/null
 */
 
 #define DEBUG_MISC     0
 #define DEBUG_CALLS    0
 #define DEBUG_MIXER    0
 #define DEBUG_CODEC    0
-#define DEBUG_IO       0
 #define DEBUG_TIMER    0
 #define DEBUG_GAME     0
 #define DEBUG_PM       0
@@ -299,6 +300,7 @@ struct snd_azf3328_codec_data {
 };
 
 enum snd_azf3328_codec_type {
+  /* warning: fixed indices (also used for bitmask checks!) */
   AZF_CODEC_PLAYBACK = 0,
   AZF_CODEC_CAPTURE = 1,
   AZF_CODEC_I2S_OUT = 2,
@@ -362,6 +364,9 @@ MODULE_DEVICE_TABLE(pci, snd_azf3328_ids);
 static int
 snd_azf3328_io_reg_setb(unsigned reg, u8 mask, bool do_set)
 {
+       /* Well, strictly spoken, the inb/outb sequence isn't atomic
+          and would need locking. However we currently don't care
+          since it potentially complicates matters. */
        u8 prev = inb(reg), new;
 
        new = (do_set) ? (prev|mask) : (prev & ~mask);
@@ -1004,7 +1009,8 @@ snd_azf3328_codec_setfmt(struct snd_azf3328 *chip,
         * (FIXME: yes, it works, but what exactly am I doing here?? :)
         * FIXME: does this have some side effects for full-duplex
         * or other dramatic side effects? */
-       if (codec_type == AZF_CODEC_PLAYBACK) /* only do it for playback */
+       /* do it for non-capture codecs only */
+       if (codec_type == AZF_CODEC_PLAYBACK)
                snd_azf3328_codec_outw(codec, IDX_IO_CODEC_DMA_FLAGS,
                        snd_azf3328_codec_inw(codec, IDX_IO_CODEC_DMA_FLAGS) |
                        DMA_RUN_SOMETHING1 |
@@ -1368,8 +1374,8 @@ snd_azf3328_codec_pointer(struct snd_pcm_substream *substream,
        /* calculate offset */
        result -= bufptr;
        frmres = bytes_to_frames( substream->runtime, result);
-       snd_azf3328_dbgcodec("%s @ 0x%8lx, frames %8ld\n",
-                               codec->name, result, frmres);
+       snd_azf3328_dbgcodec("%08li %s @ 0x%8lx, frames %8ld\n",
+                               jiffies, codec->name, result, frmres);
        return frmres;
 }
 
@@ -1532,7 +1538,7 @@ snd_azf3328_gameport_cooked_read(struct gameport *gameport,
                }
        }
 
-       /* trigger next axes sampling, to be evaluated the next time we
+       /* trigger next sampling of axes, to be evaluated the next time we
         * enter this function */
 
        /* for some very, very strange reason we cannot enable
@@ -1966,7 +1972,7 @@ snd_azf3328_timer_start(struct snd_timer *timer)
                snd_azf3328_dbgtimer("delay was too low (%d)!\n", delay);
                delay = 49; /* minimum time is 49 ticks */
        }
-       snd_azf3328_dbgtimer("setting timer countdown value %d, add COUNTDOWN|IRQ\n", delay);
+       snd_azf3328_dbgtimer("setting timer countdown value %d\n", delay);
        delay |= TIMER_COUNTDOWN_ENABLE | TIMER_IRQ_ENABLE;
        spin_lock_irqsave(&chip->reg_lock, flags);
        snd_azf3328_ctrl_outl(chip, IDX_IO_TIMER_VALUE, delay);
@@ -2257,7 +2263,7 @@ snd_azf3328_create(struct snd_card *card,
                struct snd_azf3328_codec_data *codec =
                         &chip->codecs[codec_type];
 
-               /* shutdown codecs to save power */
+               /* shutdown codecs to reduce power / noise */
                        /* have ...ctrl_codec_activity() act properly */
                codec->running = 1;
                snd_azf3328_ctrl_codec_activity(chip, codec_type, 0);
@@ -2419,6 +2425,7 @@ snd_azf3328_suspend(struct pci_dev *pci, pm_message_t state)
 
        snd_power_change_state(card, SNDRV_CTL_POWER_D3hot);
 
+       /* same pcm object for playback/capture */
        snd_pcm_suspend_all(chip->pcm[AZF_CODEC_PLAYBACK]);
        snd_pcm_suspend_all(chip->pcm[AZF_CODEC_I2S_OUT]);