[MIPS] Sort system types alphabetically
authorYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Fri, 27 Jul 2007 06:25:43 +0000 (15:25 +0900)
committerRalf Baechle <ralf@linux-mips.org>
Tue, 31 Jul 2007 20:35:23 +0000 (21:35 +0100)
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
arch/mips/Kconfig

index a3ee9b7e10b4119ba8ab0a36081a0be29b5933b5..0893e084150ea023b7fefecfaf8266c585c40642 100644 (file)
@@ -15,29 +15,6 @@ choice
        prompt "System type"
        default SGI_IP22
 
-config LEMOTE_FULONG
-       bool "Lemote Fulong mini-PC"
-       select ARCH_SPARSEMEM_ENABLE
-       select SYS_HAS_CPU_LOONGSON2
-       select DMA_NONCOHERENT
-       select BOOT_ELF32
-       select BOARD_SCACHE
-       select HAVE_STD_PC_SERIAL_PORT
-       select HW_HAS_PCI
-       select I8259
-       select ISA
-       select IRQ_CPU
-       select SYS_SUPPORTS_32BIT_KERNEL
-       select SYS_SUPPORTS_64BIT_KERNEL
-       select SYS_SUPPORTS_LITTLE_ENDIAN
-       select SYS_SUPPORTS_HIGHMEM
-       select SYS_HAS_EARLY_PRINTK
-       select GENERIC_HARDIRQS_NO__DO_IRQ
-       select CPU_HAS_WB
-       help
-         Lemote Fulong mini-PC board based on the Chinese Loongson-2E CPU and
-         an FPGA northbridge
-
 config MACH_ALCHEMY
        bool "Alchemy processor based machines"
 
@@ -131,6 +108,29 @@ config MACH_JAZZ
         Members include the Acer PICA, MIPS Magnum 4000, MIPS Millenium and
         Olivetti M700-10 workstations.
 
+config LEMOTE_FULONG
+       bool "Lemote Fulong mini-PC"
+       select ARCH_SPARSEMEM_ENABLE
+       select SYS_HAS_CPU_LOONGSON2
+       select DMA_NONCOHERENT
+       select BOOT_ELF32
+       select BOARD_SCACHE
+       select HAVE_STD_PC_SERIAL_PORT
+       select HW_HAS_PCI
+       select I8259
+       select ISA
+       select IRQ_CPU
+       select SYS_SUPPORTS_32BIT_KERNEL
+       select SYS_SUPPORTS_64BIT_KERNEL
+       select SYS_SUPPORTS_LITTLE_ENDIAN
+       select SYS_SUPPORTS_HIGHMEM
+       select SYS_HAS_EARLY_PRINTK
+       select GENERIC_HARDIRQS_NO__DO_IRQ
+       select CPU_HAS_WB
+       help
+         Lemote Fulong mini-PC board based on the Chinese Loongson-2E CPU and
+         an FPGA northbridge
+
 config MIPS_ATLAS
        bool "MIPS Atlas board"
        select BOOT_ELF32
@@ -210,27 +210,6 @@ config MIPS_SEAD
          This enables support for the MIPS Technologies SEAD evaluation
          board.
 
-config WR_PPMC
-       bool "Wind River PPMC board"
-       select IRQ_CPU
-       select BOOT_ELF32
-       select DMA_NONCOHERENT
-       select HW_HAS_PCI
-       select PCI_GT64XXX_PCI0
-       select SWAP_IO_SPACE
-       select SYS_HAS_CPU_MIPS32_R1
-       select SYS_HAS_CPU_MIPS32_R2
-       select SYS_HAS_CPU_MIPS64_R1
-       select SYS_HAS_CPU_NEVADA
-       select SYS_HAS_CPU_RM7000
-       select SYS_SUPPORTS_32BIT_KERNEL
-       select SYS_SUPPORTS_64BIT_KERNEL
-       select SYS_SUPPORTS_BIG_ENDIAN
-       select SYS_SUPPORTS_LITTLE_ENDIAN
-       help
-         This enables support for the Wind River MIPS32 4KC PPMC evaluation
-         board, which is based on GT64120 bridge chip.
-
 config MIPS_SIM
        bool 'MIPS simulator (MIPSsim)'
        select DMA_NONCOHERENT
@@ -266,16 +245,6 @@ config MOMENCO_OCELOT
          The Ocelot is a MIPS-based Single Board Computer (SBC) made by
          Momentum Computer <http://www.momenco.com/>.
 
-config PNX8550_JBS
-       bool "Philips PNX8550 based JBS board"
-       select PNX8550
-       select SYS_SUPPORTS_LITTLE_ENDIAN
-
-config PNX8550_STB810
-       bool "Philips PNX8550 based STB810 board"
-       select PNX8550
-       select SYS_SUPPORTS_LITTLE_ENDIAN
-
 config DDB5477
        bool "NEC DDB Vrc-5477"
        select DDB5XXX_COMMON
@@ -296,11 +265,35 @@ config DDB5477
          Features : kernel debugging, serial terminal, NFS root fs, on-board
          ether port USB, AC97, PCI, etc.
 
+config MARKEINS
+       bool "NEC EMMA2RH Mark-eins"
+       select DMA_NONCOHERENT
+       select HW_HAS_PCI
+       select IRQ_CPU
+       select SWAP_IO_SPACE
+       select SYS_SUPPORTS_32BIT_KERNEL
+       select SYS_SUPPORTS_BIG_ENDIAN
+       select SYS_SUPPORTS_LITTLE_ENDIAN
+       select SYS_HAS_CPU_R5000
+       help
+         This enables support for the R5432-based NEC Mark-eins
+         boards with R5500 CPU.
+
 config MACH_VR41XX
        bool "NEC VR4100 series based machines"
        select SYS_HAS_CPU_VR41XX
        select GENERIC_HARDIRQS_NO__DO_IRQ
 
+config PNX8550_JBS
+       bool "Philips PNX8550 based JBS board"
+       select PNX8550
+       select SYS_SUPPORTS_LITTLE_ENDIAN
+
+config PNX8550_STB810
+       bool "Philips PNX8550 based STB810 board"
+       select PNX8550
+       select SYS_SUPPORTS_LITTLE_ENDIAN
+
 config PMC_MSP
        bool "PMC-Sierra MSP chipsets"
        depends on EXPERIMENTAL
@@ -367,20 +360,6 @@ config QEMU
          simulate actual MIPS hardware platforms.  More information on Qemu
          can be found at http://www.linux-mips.org/wiki/Qemu.
 
-config MARKEINS
-       bool "NEC EMMA2RH Mark-eins"
-       select DMA_NONCOHERENT
-       select HW_HAS_PCI
-       select IRQ_CPU
-       select SWAP_IO_SPACE
-       select SYS_SUPPORTS_32BIT_KERNEL
-       select SYS_SUPPORTS_BIG_ENDIAN
-       select SYS_SUPPORTS_LITTLE_ENDIAN
-       select SYS_HAS_CPU_R5000
-       help
-         This enables support for the R5432-based NEC Mark-eins
-         boards with R5500 CPU.
-
 config SGI_IP22
        bool "SGI IP22 (Indy/Indigo2)"
        select ARC
@@ -443,41 +422,38 @@ config SGI_IP32
        help
          If you want this kernel to run on SGI O2 workstation, say Y here.
 
-config SIBYTE_BIGSUR
-       bool "Sibyte BCM91480B-BigSur"
+config SIBYTE_CRHINE
+       bool "Sibyte BCM91120C-CRhine"
+       depends on EXPERIMENTAL
        select BOOT_ELF32
        select DMA_COHERENT
-       select NR_CPUS_DEFAULT_4
-       select PCI_DOMAINS
-       select SIBYTE_BCM1x80
+       select SIBYTE_BCM1120
        select SWAP_IO_SPACE
        select SYS_HAS_CPU_SB1
        select SYS_SUPPORTS_BIG_ENDIAN
        select SYS_SUPPORTS_LITTLE_ENDIAN
 
-config SIBYTE_SWARM
-       bool "Sibyte BCM91250A-SWARM"
+config SIBYTE_CARMEL
+       bool "Sibyte BCM91120x-Carmel"
+       depends on EXPERIMENTAL
        select BOOT_ELF32
        select DMA_COHERENT
-       select NR_CPUS_DEFAULT_2
-       select SIBYTE_SB1250
+       select SIBYTE_BCM1120
        select SWAP_IO_SPACE
        select SYS_HAS_CPU_SB1
        select SYS_SUPPORTS_BIG_ENDIAN
-       select SYS_SUPPORTS_HIGHMEM
-       select SYS_SUPPORTS_KGDB
        select SYS_SUPPORTS_LITTLE_ENDIAN
 
-config SIBYTE_SENTOSA
-       bool "Sibyte BCM91250E-Sentosa"
+config SIBYTE_CRHONE
+       bool "Sibyte BCM91125C-CRhone"
        depends on EXPERIMENTAL
        select BOOT_ELF32
        select DMA_COHERENT
-       select NR_CPUS_DEFAULT_2
-       select SIBYTE_SB1250
+       select SIBYTE_BCM1125
        select SWAP_IO_SPACE
        select SYS_HAS_CPU_SB1
        select SYS_SUPPORTS_BIG_ENDIAN
+       select SYS_SUPPORTS_HIGHMEM
        select SYS_SUPPORTS_LITTLE_ENDIAN
 
 config SIBYTE_RHONE
@@ -491,19 +467,21 @@ config SIBYTE_RHONE
        select SYS_SUPPORTS_BIG_ENDIAN
        select SYS_SUPPORTS_LITTLE_ENDIAN
 
-config SIBYTE_CARMEL
-       bool "Sibyte BCM91120x-Carmel"
-       depends on EXPERIMENTAL
+config SIBYTE_SWARM
+       bool "Sibyte BCM91250A-SWARM"
        select BOOT_ELF32
        select DMA_COHERENT
-       select SIBYTE_BCM1120
+       select NR_CPUS_DEFAULT_2
+       select SIBYTE_SB1250
        select SWAP_IO_SPACE
        select SYS_HAS_CPU_SB1
        select SYS_SUPPORTS_BIG_ENDIAN
+       select SYS_SUPPORTS_HIGHMEM
+       select SYS_SUPPORTS_KGDB
        select SYS_SUPPORTS_LITTLE_ENDIAN
 
-config SIBYTE_PTSWARM
-       bool "Sibyte BCM91250PT-PTSWARM"
+config SIBYTE_LITTLESUR
+       bool "Sibyte BCM91250C2-LittleSur"
        depends on EXPERIMENTAL
        select BOOT_ELF32
        select DMA_COHERENT
@@ -515,8 +493,8 @@ config SIBYTE_PTSWARM
        select SYS_SUPPORTS_HIGHMEM
        select SYS_SUPPORTS_LITTLE_ENDIAN
 
-config SIBYTE_LITTLESUR
-       bool "Sibyte BCM91250C2-LittleSur"
+config SIBYTE_SENTOSA
+       bool "Sibyte BCM91250E-Sentosa"
        depends on EXPERIMENTAL
        select BOOT_ELF32
        select DMA_COHERENT
@@ -525,30 +503,31 @@ config SIBYTE_LITTLESUR
        select SWAP_IO_SPACE
        select SYS_HAS_CPU_SB1
        select SYS_SUPPORTS_BIG_ENDIAN
-       select SYS_SUPPORTS_HIGHMEM
        select SYS_SUPPORTS_LITTLE_ENDIAN
 
-config SIBYTE_CRHINE
-       bool "Sibyte BCM91120C-CRhine"
+config SIBYTE_PTSWARM
+       bool "Sibyte BCM91250PT-PTSWARM"
        depends on EXPERIMENTAL
        select BOOT_ELF32
        select DMA_COHERENT
-       select SIBYTE_BCM1120
+       select NR_CPUS_DEFAULT_2
+       select SIBYTE_SB1250
        select SWAP_IO_SPACE
        select SYS_HAS_CPU_SB1
        select SYS_SUPPORTS_BIG_ENDIAN
+       select SYS_SUPPORTS_HIGHMEM
        select SYS_SUPPORTS_LITTLE_ENDIAN
 
-config SIBYTE_CRHONE
-       bool "Sibyte BCM91125C-CRhone"
-       depends on EXPERIMENTAL
+config SIBYTE_BIGSUR
+       bool "Sibyte BCM91480B-BigSur"
        select BOOT_ELF32
        select DMA_COHERENT
-       select SIBYTE_BCM1125
+       select NR_CPUS_DEFAULT_4
+       select PCI_DOMAINS
+       select SIBYTE_BCM1x80
        select SWAP_IO_SPACE
        select SYS_HAS_CPU_SB1
        select SYS_SUPPORTS_BIG_ENDIAN
-       select SYS_SUPPORTS_HIGHMEM
        select SYS_SUPPORTS_LITTLE_ENDIAN
 
 config SNI_RM
@@ -632,6 +611,27 @@ config TOSHIBA_RBTX4938
          This Toshiba board is based on the TX4938 processor. Say Y here to
          support this machine type
 
+config WR_PPMC
+       bool "Wind River PPMC board"
+       select IRQ_CPU
+       select BOOT_ELF32
+       select DMA_NONCOHERENT
+       select HW_HAS_PCI
+       select PCI_GT64XXX_PCI0
+       select SWAP_IO_SPACE
+       select SYS_HAS_CPU_MIPS32_R1
+       select SYS_HAS_CPU_MIPS32_R2
+       select SYS_HAS_CPU_MIPS64_R1
+       select SYS_HAS_CPU_NEVADA
+       select SYS_HAS_CPU_RM7000
+       select SYS_SUPPORTS_32BIT_KERNEL
+       select SYS_SUPPORTS_64BIT_KERNEL
+       select SYS_SUPPORTS_BIG_ENDIAN
+       select SYS_SUPPORTS_LITTLE_ENDIAN
+       help
+         This enables support for the Wind River MIPS32 4KC PPMC evaluation
+         board, which is based on GT64120 bridge chip.
+
 endchoice
 
 source "arch/mips/au1000/Kconfig"