drivers/net/sky2.c: Use (pr|netdev)_<level> macro helpers
authorJoe Perches <joe@perches.com>
Wed, 17 Feb 2010 15:01:59 +0000 (15:01 +0000)
committerDavid S. Miller <davem@davemloft.net>
Thu, 18 Feb 2010 01:45:29 +0000 (17:45 -0800)
Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
Remove #define PFX
Use pr_<level>
Use netdev_<level>

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/sky2.c

index a1198f14199600c87187fcbaebf59558449da5f8..d1e98e2170cea6583f48ba626be09f8bedaa04df 100644 (file)
@@ -22,6 +22,8 @@
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/crc32.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
@@ -51,7 +53,6 @@
 
 #define DRV_NAME               "sky2"
 #define DRV_VERSION            "1.27"
-#define PFX                    DRV_NAME " "
 
 /*
  * The Yukon II chipset takes 64 bit command blocks (called list elements)
@@ -1212,8 +1213,7 @@ static void sky2_rx_stop(struct sky2_port *sky2)
                    == sky2_read8(hw, RB_ADDR(rxq, Q_RL)))
                        goto stopped;
 
-       printk(KERN_WARNING PFX "%s: receiver stop failed\n",
-              sky2->netdev->name);
+       netdev_warn(sky2->netdev, "receiver stop failed\n");
 stopped:
        sky2_write32(hw, Q_ADDR(rxq, Q_CSR), BMU_RST_SET | BMU_FIFO_RST);
 
@@ -1555,7 +1555,7 @@ static void sky2_hw_up(struct sky2_port *sky2)
        if (ramsize > 0) {
                u32 rxspace;
 
-               pr_debug(PFX "%s: ram buffer %dK\n", sky2->netdev->name, ramsize);
+               netdev_dbg(sky2->netdev, "ram buffer %dK\n", ramsize);
                if (ramsize < 16)
                        rxspace = ramsize / 2;
                else
@@ -2070,13 +2070,12 @@ static int sky2_autoneg_done(struct sky2_port *sky2, u16 aux)
        advert = gm_phy_read(hw, port, PHY_MARV_AUNE_ADV);
        lpa = gm_phy_read(hw, port, PHY_MARV_AUNE_LP);
        if (lpa & PHY_M_AN_RF) {
-               printk(KERN_ERR PFX "%s: remote fault", sky2->netdev->name);
+               netdev_err(sky2->netdev, "remote fault\n");
                return -1;
        }
 
        if (!(aux & PHY_M_PS_SPDUP_RES)) {
-               printk(KERN_ERR PFX "%s: speed/duplex mismatch",
-                      sky2->netdev->name);
+               netdev_err(sky2->netdev, "speed/duplex mismatch\n");
                return -1;
        }
 
@@ -2195,10 +2194,10 @@ static void sky2_tx_timeout(struct net_device *dev)
 
        netif_err(sky2, timer, dev, "tx timeout\n");
 
-       printk(KERN_DEBUG PFX "%s: transmit ring %u .. %u report=%u done=%u\n",
-              dev->name, sky2->tx_cons, sky2->tx_prod,
-              sky2_read16(hw, sky2->port == 0 ? STAT_TXA1_RIDX : STAT_TXA2_RIDX),
-              sky2_read16(hw, Q_ADDR(txqaddr[sky2->port], Q_DONE)));
+       netdev_printk(KERN_DEBUG, dev, "transmit ring %u .. %u report=%u done=%u\n",
+                     sky2->tx_cons, sky2->tx_prod,
+                     sky2_read16(hw, sky2->port == 0 ? STAT_TXA1_RIDX : STAT_TXA2_RIDX),
+                     sky2_read16(hw, Q_ADDR(txqaddr[sky2->port], Q_DONE)));
 
        /* can't restart safely under softirq */
        schedule_work(&hw->restart_work);
@@ -2614,8 +2613,7 @@ static int sky2_status_intr(struct sky2_hw *hw, int to_do, u16 idx)
 
                default:
                        if (net_ratelimit())
-                               printk(KERN_WARNING PFX
-                                      "unknown status opcode 0x%x\n", opcode);
+                               pr_warning("unknown status opcode 0x%x\n", opcode);
                }
        } while (hw->st_idx != idx);
 
@@ -2634,41 +2632,37 @@ static void sky2_hw_error(struct sky2_hw *hw, unsigned port, u32 status)
        struct net_device *dev = hw->dev[port];
 
        if (net_ratelimit())
-               printk(KERN_INFO PFX "%s: hw error interrupt status 0x%x\n",
-                      dev->name, status);
+               netdev_info(dev, "hw error interrupt status 0x%x\n", status);
 
        if (status & Y2_IS_PAR_RD1) {
                if (net_ratelimit())
-                       printk(KERN_ERR PFX "%s: ram data read parity error\n",
-                              dev->name);
+                       netdev_err(dev, "ram data read parity error\n");
                /* Clear IRQ */
                sky2_write16(hw, RAM_BUFFER(port, B3_RI_CTRL), RI_CLR_RD_PERR);
        }
 
        if (status & Y2_IS_PAR_WR1) {
                if (net_ratelimit())
-                       printk(KERN_ERR PFX "%s: ram data write parity error\n",
-                              dev->name);
+                       netdev_err(dev, "ram data write parity error\n");
 
                sky2_write16(hw, RAM_BUFFER(port, B3_RI_CTRL), RI_CLR_WR_PERR);
        }
 
        if (status & Y2_IS_PAR_MAC1) {
                if (net_ratelimit())
-                       printk(KERN_ERR PFX "%s: MAC parity error\n", dev->name);
+                       netdev_err(dev, "MAC parity error\n");
                sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_CLI_TX_PE);
        }
 
        if (status & Y2_IS_PAR_RX1) {
                if (net_ratelimit())
-                       printk(KERN_ERR PFX "%s: RX parity error\n", dev->name);
+                       netdev_err(dev, "RX parity error\n");
                sky2_write32(hw, Q_ADDR(rxqaddr[port], Q_CSR), BMU_CLR_IRQ_PAR);
        }
 
        if (status & Y2_IS_TCP_TXA1) {
                if (net_ratelimit())
-                       printk(KERN_ERR PFX "%s: TCP segmentation error\n",
-                              dev->name);
+                       netdev_err(dev, "TCP segmentation error\n");
                sky2_write32(hw, Q_ADDR(txqaddr[port], Q_CSR), BMU_CLR_IRQ_TCP);
        }
 }
@@ -2751,8 +2745,7 @@ static void sky2_le_error(struct sky2_hw *hw, unsigned port, u16 q)
        struct net_device *dev = hw->dev[port];
        u16 idx = sky2_read16(hw, Y2_QADDR(q, PREF_UNIT_GET_IDX));
 
-       dev_err(&hw->pdev->dev, PFX
-               "%s: descriptor error q=%#x get=%u put=%u\n",
+       dev_err(&hw->pdev->dev, "%s: descriptor error q=%#x get=%u put=%u\n",
                dev->name, (unsigned) q, (unsigned) idx,
                (unsigned) sky2_read16(hw, Y2_QADDR(q, PREF_UNIT_PUT_IDX)));
 
@@ -2777,9 +2770,10 @@ static int sky2_rx_hung(struct net_device *dev)
             /* Check if the PCI RX hang */
             (fifo_rp == sky2->check.fifo_rp &&
              fifo_lev != 0 && fifo_lev >= sky2->check.fifo_lev))) {
-               printk(KERN_DEBUG PFX "%s: hung mac %d:%d fifo %d (%d:%d)\n",
-                      dev->name, mac_lev, mac_rp, fifo_lev, fifo_rp,
-                      sky2_read8(hw, Q_ADDR(rxq, Q_WP)));
+               netdev_printk(KERN_DEBUG, dev,
+                             "hung mac %d:%d fifo %d (%d:%d)\n",
+                             mac_lev, mac_rp, fifo_lev,
+                             fifo_rp, sky2_read8(hw, Q_ADDR(rxq, Q_WP)));
                return 1;
        } else {
                sky2->check.last = dev->last_rx;
@@ -2810,8 +2804,7 @@ static void sky2_watchdog(unsigned long arg)
                        /* For chips with Rx FIFO, check if stuck */
                        if ((hw->flags & SKY2_HW_RAM_BUFFER) &&
                             sky2_rx_hung(dev)) {
-                               pr_info(PFX "%s: receiver hang detected\n",
-                                       dev->name);
+                               netdev_info(dev, "receiver hang detected\n");
                                schedule_work(&hw->restart_work);
                                return;
                        }
@@ -3253,8 +3246,7 @@ static int sky2_reattach(struct net_device *dev)
        if (netif_running(dev)) {
                err = sky2_up(dev);
                if (err) {
-                       printk(KERN_INFO PFX "%s: could not restart %d\n",
-                              dev->name, err);
+                       netdev_info(dev, "could not restart %d\n", err);
                        dev_close(dev);
                } else {
                        netif_device_attach(dev);
@@ -4032,7 +4024,7 @@ static int sky2_vpd_wait(const struct sky2_hw *hw, int cap, u16 busy)
        while ( (sky2_pci_read16(hw, cap + PCI_VPD_ADDR) & PCI_VPD_ADDR_F) == busy) {
                /* Can take up to 10.6 ms for write */
                if (time_after(jiffies, start + HZ/4)) {
-                       dev_err(&hw->pdev->dev, PFX "VPD cycle timed out");
+                       dev_err(&hw->pdev->dev, "VPD cycle timed out\n");
                        return -ETIMEDOUT;
                }
                mdelay(1);
@@ -4366,8 +4358,7 @@ static int sky2_device_event(struct notifier_block *unused,
 
        case NETDEV_GOING_DOWN:
                if (sky2->debugfs) {
-                       printk(KERN_DEBUG PFX "%s: remove debugfs\n",
-                              dev->name);
+                       netdev_printk(KERN_DEBUG, dev, "remove debugfs\n");
                        debugfs_remove(sky2->debugfs);
                        sky2->debugfs = NULL;
                }
@@ -4931,7 +4922,7 @@ static struct pci_driver sky2_driver = {
 
 static int __init sky2_init_module(void)
 {
-       pr_info(PFX "driver version " DRV_VERSION "\n");
+       pr_info("driver version " DRV_VERSION "\n");
 
        sky2_debug_init();
        return pci_register_driver(&sky2_driver);