config MACH_MX21ADS
bool "MX21ADS platform"
+ select IMX_HAVE_PLATFORM_IMX_FB
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MXC_NAND
help
config MACH_MX27ADS
bool "MX27ADS platform"
+ select IMX_HAVE_PLATFORM_IMX_FB
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MXC_NAND
default MACH_PCM970_BASEBOARD
config MACH_PCM970_BASEBOARD
- prompt "PHYTEC PCM970 development board"
- bool
+ bool "PHYTEC PCM970 development board"
+ select IMX_HAVE_PLATFORM_IMX_FB
help
This adds board specific devices that can be found on Phytec's
PCM970 evaluation board.
config MACH_EUKREA_MBIMX27_BASEBOARD
bool "Eukrea MBIMX27 development board"
+ select IMX_HAVE_PLATFORM_IMX_FB
select IMX_HAVE_PLATFORM_IMX_SSI
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_SPI_IMX
config MACH_PCA100
bool "Phytec phyCARD-s (pca100)"
select IMX_HAVE_PLATFORM_IMX2_WDT
+ select IMX_HAVE_PLATFORM_IMX_FB
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_SSI
select IMX_HAVE_PLATFORM_IMX_UART
config MACH_MXT_TD60
bool "Maxtrack i-MXT TD60"
+ select IMX_HAVE_PLATFORM_IMX_FB
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MXC_NAND
#define imx21_add_imx2_wdt(pdata) \
imx_add_imx2_wdt(&imx21_imx2_wdt_data)
+extern const struct imx_imx_fb_data imx21_imx_fb_data __initconst;
+#define imx21_add_imx_fb(pdata) \
+ imx_add_imx_fb(&imx21_imx_fb_data, pdata)
+
extern const struct imx_imx_i2c_data imx21_imx_i2c_data __initconst;
#define imx21_add_imx_i2c(pdata) \
imx_add_imx_i2c(&imx21_imx_i2c_data, pdata)
#define imx27_add_imx2_wdt(pdata) \
imx_add_imx2_wdt(&imx27_imx2_wdt_data)
+extern const struct imx_imx_fb_data imx27_imx_fb_data __initconst;
+#define imx27_add_imx_fb(pdata) \
+ imx_add_imx_fb(&imx27_imx_fb_data, pdata)
+
extern const struct imx_imx_i2c_data imx27_imx_i2c_data[] __initconst;
#define imx27_add_imx_i2c(id, pdata) \
imx_add_imx_i2c(&imx27_imx_i2c_data[id], pdata)
#endif
#if defined(CONFIG_MACH_MX21) || defined(CONFIG_MACH_MX27)
-/*
- * lcdc:
- * - i.MX1: the basic controller
- * - i.MX21: to be checked
- * - i.MX27: like i.MX1, with slightly variations
- */
-static struct resource mxc_fb[] = {
- {
- .start = MX2x_LCDC_BASE_ADDR,
- .end = MX2x_LCDC_BASE_ADDR + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = MX2x_INT_LCDC,
- .end = MX2x_INT_LCDC,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-/* mxc lcd driver */
-struct platform_device mxc_fb_device = {
- .name = "imx-fb",
- .id = 0,
- .num_resources = ARRAY_SIZE(mxc_fb),
- .resource = mxc_fb,
- .dev = {
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
-
static struct resource mxc_pwm_resources[] = {
{
.start = MX2x_PWM_BASE_ADDR,
#if defined(CONFIG_MACH_MX21) || defined(CONFIG_MACH_MX27)
-extern struct platform_device mxc_fb_device;
extern struct platform_device mxc_pwm_device;
extern struct platform_device mxc_sdhc_device0;
extern struct platform_device mxc_sdhc_device1;
#include <mach/common.h>
#include <mach/iomux-mx27.h>
-#include <mach/imxfb.h>
#include <mach/hardware.h>
#include <mach/mmc.h>
#include <mach/spi.h>
},
};
-static struct imx_fb_platform_data eukrea_mbimx27_fb_data = {
+static const struct imx_fb_platform_data eukrea_mbimx27_fb_data __initconst = {
.mode = eukrea_mbimx27_modes,
.num_modes = ARRAY_SIZE(eukrea_mbimx27_modes),
imx27_add_imx_uart3(&uart_pdata);
#endif
- mxc_register_device(&mxc_fb_device, &eukrea_mbimx27_fb_data);
+ imx27_add_imx_fb(&eukrea_mbimx27_fb_data);
mxc_register_device(&mxc_sdhc_device0, &sdhc_pdata);
i2c_register_board_info(0, eukrea_mbimx27_i2c_devices,
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <asm/mach/map.h>
-#include <mach/imxfb.h>
#include <mach/iomux-mx21.h>
#include <mach/mxc_nand.h>
#include <mach/mmc.h>
},
};
-static struct imx_fb_platform_data mx21ads_fb_data = {
+static const struct imx_fb_platform_data mx21ads_fb_data __initconst = {
.mode = mx21ads_modes,
.num_modes = ARRAY_SIZE(mx21ads_modes),
imx21_add_imx_uart0(&uart_pdata_rts);
imx21_add_imx_uart2(&uart_pdata_norts);
imx21_add_imx_uart3(&uart_pdata_rts);
- mxc_register_device(&mxc_fb_device, &mx21ads_fb_data);
+ imx21_add_imx_fb(&mx21ads_fb_data);
mxc_register_device(&mxc_sdhc_device0, &mx21ads_sdhc_pdata);
imx21_add_mxc_nand(&mx21ads_nand_board_info);
#include <mach/gpio.h>
#include <mach/iomux-mx27.h>
#include <mach/mxc_nand.h>
-#include <mach/imxfb.h>
#include <mach/mmc.h>
#include "devices-imx27.h"
},
};
-static struct imx_fb_platform_data mx27ads_fb_data = {
+static const struct imx_fb_platform_data mx27ads_fb_data __initconst = {
.mode = mx27ads_modes,
.num_modes = ARRAY_SIZE(mx27ads_modes),
i2c_register_board_info(1, mx27ads_i2c_devices,
ARRAY_SIZE(mx27ads_i2c_devices));
imx27_add_imx_i2c(1, &mx27ads_i2c1_data);
- mxc_register_device(&mxc_fb_device, &mx27ads_fb_data);
+ imx27_add_imx_fb(&mx27ads_fb_data);
mxc_register_device(&mxc_sdhc_device0, &sdhc1_pdata);
mxc_register_device(&mxc_sdhc_device1, &sdhc2_pdata);
#include <mach/iomux-mx27.h>
#include <mach/mxc_nand.h>
#include <linux/i2c/pca953x.h>
-#include <mach/imxfb.h>
#include <mach/mmc.h>
#include "devices-imx27.h"
},
};
-static struct imx_fb_platform_data mxt_td60_fb_data = {
+static const struct imx_fb_platform_data mxt_td60_fb_data __initconst = {
.mode = mxt_td60_modes,
.num_modes = ARRAY_SIZE(mxt_td60_modes),
imx27_add_imx_i2c(0, &mxt_td60_i2c0_data);
imx27_add_imx_i2c(1, &mxt_td60_i2c1_data);
- mxc_register_device(&mxc_fb_device, &mxt_td60_fb_data);
+ imx27_add_imx_fb(&mxt_td60_fb_data);
mxc_register_device(&mxc_sdhc_device0, &sdhc1_pdata);
imx27_add_fec(NULL);
}
#include <mach/mmc.h>
#include <mach/mxc_ehci.h>
#include <mach/ulpi.h>
-#include <mach/imxfb.h>
#include "devices-imx27.h"
#include "devices.h"
},
};
-static struct imx_fb_platform_data pca100_fb_data = {
+static const struct imx_fb_platform_data pca100_fb_data __initconst = {
.mode = pca100_fb_modes,
.num_modes = ARRAY_SIZE(pca100_fb_modes),
mxc_register_device(&mxc_otg_udc_device, &otg_device_pdata);
}
- mxc_register_device(&mxc_fb_device, &pca100_fb_data);
+ imx27_add_imx_fb(&pca100_fb_data);
imx27_add_fec(NULL);
imx27_add_imx2_wdt(NULL);
#include <mach/common.h>
#include <mach/iomux-mx27.h>
-#include <mach/imxfb.h>
#include <mach/hardware.h>
#include <mach/mmc.h>
+#include "devices-imx27.h"
#include "devices.h"
static const int pcm970_pins[] __initconst = {
},
};
-static struct imx_fb_platform_data pcm038_fb_data = {
+static const struct imx_fb_platform_data pcm038_fb_data __initconst = {
.mode = pcm970_modes,
.num_modes = ARRAY_SIZE(pcm970_modes),
mxc_gpio_setup_multiple_pins(pcm970_pins, ARRAY_SIZE(pcm970_pins),
"PCM970");
- mxc_register_device(&mxc_fb_device, &pcm038_fb_data);
+ imx27_add_imx_fb(&pcm038_fb_data);
mxc_gpio_mode(GPIO_PORTC | 28 | GPIO_GPIO | GPIO_IN);
mxc_register_device(&mxc_sdhc_device1, &sdhc_pdata);
platform_device_register(&pcm970_sja1000);
config IMX_HAVE_PLATFORM_IMX2_WDT
bool
+config IMX_HAVE_PLATFORM_IMX_FB
+ bool
+
config IMX_HAVE_PLATFORM_IMX_I2C
bool
obj-$(CONFIG_IMX_HAVE_PLATFORM_GPIO_KEYS) += platform-gpio_keys.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX2_WDT) += platform-imx2-wdt.o
obj-y += platform-imx-dma.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_FB) += platform-imx-fb.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_I2C) += platform-imx-i2c.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_SSI) += platform-imx-ssi.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_UART) += platform-imx-uart.o
--- /dev/null
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/hardware.h>
+#include <mach/devices-common.h>
+
+#define imx_imx_fb_data_entry_single(soc) \
+ { \
+ .iobase = soc ## _LCDC_BASE_ADDR, \
+ .irq = soc ## _INT_LCDC, \
+ }
+
+#ifdef CONFIG_SOC_IMX21
+const struct imx_imx_fb_data imx21_imx_fb_data __initconst =
+ imx_imx_fb_data_entry_single(MX21);
+#endif /* ifdef CONFIG_SOC_IMX21 */
+
+#ifdef CONFIG_SOC_IMX27
+const struct imx_imx_fb_data imx27_imx_fb_data __initconst =
+ imx_imx_fb_data_entry_single(MX27);
+#endif /* ifdef CONFIG_SOC_IMX27 */
+
+struct platform_device *__init imx_add_imx_fb(
+ const struct imx_imx_fb_data *data,
+ const struct imx_fb_platform_data *pdata)
+{
+ struct resource res[] = {
+ {
+ .start = data->iobase,
+ .end = data->iobase + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = data->irq,
+ .end = data->irq,
+ .flags = IORESOURCE_IRQ,
+ },
+ };
+ return imx_add_platform_device_dmamask("imx-fb", 0,
+ res, ARRAY_SIZE(res),
+ pdata, sizeof(*pdata), DMA_BIT_MASK(32));
+}
struct platform_device *__init imx_add_imx2_wdt(
const struct imx_imx2_wdt_data *data);
+#include <mach/imxfb.h>
+struct imx_imx_fb_data {
+ resource_size_t iobase;
+ resource_size_t irq;
+};
+struct platform_device *__init imx_add_imx_fb(
+ const struct imx_imx_fb_data *data,
+ const struct imx_fb_platform_data *pdata);
+
#include <mach/i2c.h>
struct imx_imx_i2c_data {
int id;
/*
* This structure describes the machine which we are running on.
*/
+#ifndef __MACH_IMXFB_H__
+#define __MACH_IMXFB_H__
#include <linux/fb.h>
};
void set_imx_fb_info(struct imx_fb_platform_data *);
+#endif /* ifndef __MACH_IMXFB_H__ */