ARM: dts: imx6-sabreauto: add the ADV7180 video decoder

Enables the ADV7180 decoder sensor. The ADV7180 connects to the
parallel-bus mux input on ipu1_csi0_mux.

The ADV7180 power pin is via max7310_b port expander.

Changes from Tim Harvey:
- Use IRQ_TYPE_LEVEL_LOW instead of 0x8 for interrupt type for clarity.
- For 8-bit parallel IPU1-CSI0 bus connection only data[12-19] are used.

Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
index 1212f822c44f58c1f630405788a9a24dfe20cac4..6a7594e5d183f92c5ed7df23466d2e4bc3e508f2 100644 (file)
--- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
@@ -124,6 +124,21 @@
                        #size-cells = <0>;
                        reg = <1>;
 
+                       adv7180: camera@21 {
+                               compatible = "adi,adv7180";
+                               reg = <0x21>;
+                               powerdown-gpios = <&max7310_b 2 GPIO_ACTIVE_LOW>;
+                               interrupt-parent = <&gpio1>;
+                               interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+
+                               port {
+                                       adv7180_to_ipu1_csi0_mux: endpoint {
+                                               remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
+                                               bus-width = <8>;
+                                       };
+                               };
+                       };
+
                        max7310_a: gpio@30 {
                                compatible = "maxim,max7310";
                                reg = <0x30>;
@@ -151,6 +166,20 @@
        };
 };
 
+&ipu1_csi0_from_ipu1_csi0_mux {
+       bus-width = <8>;
+};
+
+&ipu1_csi0_mux_from_parallel_sensor {
+       remote-endpoint = <&adv7180_to_ipu1_csi0_mux>;
+       bus-width = <8>;
+};
+
+&ipu1_csi0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_ipu1_csi0>;
+};
+
 &clks {
        assigned-clocks = <&clks IMX6QDL_PLL4_BYPASS_SRC>,
                          <&clks IMX6QDL_PLL4_BYPASS>,
@@ -444,6 +473,22 @@
                        >;
                };
 
+               pinctrl_ipu1_csi0: ipu1csi0grp {
+                       fsl,pins = <
+                               MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12  0x1b0b0
+                               MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13  0x1b0b0
+                               MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14  0x1b0b0
+                               MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15  0x1b0b0
+                               MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16  0x1b0b0
+                               MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17  0x1b0b0
+                               MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18  0x1b0b0
+                               MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19  0x1b0b0
+                               MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x1b0b0
+                               MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC    0x1b0b0
+                               MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC   0x1b0b0
+                       >;
+               };
+
                pinctrl_max7310: max7310grp {
                        fsl,pins = <
                                MX6QDL_PAD_SD2_DAT0__GPIO1_IO15 0x1b0b0