Merge branch 'wireless-2.6' into wireless-next-2.6
authorReinette Chatre <reinette.chatre@intel.com>
Fri, 30 Apr 2010 22:13:00 +0000 (15:13 -0700)
committerReinette Chatre <reinette.chatre@intel.com>
Fri, 30 Apr 2010 22:13:00 +0000 (15:13 -0700)
Patch "iwlwifi: work around passive scan issue" was merged into
wireless-2.6, but touched a lot of code since modified (and moved)
in wireless-next-2.6. This caused some conflicts.

Conflicts:
drivers/net/wireless/iwlwifi/iwl-scan.c

Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
1  2 
drivers/net/wireless/iwlwifi/iwl-agn-lib.c
drivers/net/wireless/iwlwifi/iwl-commands.h
drivers/net/wireless/iwlwifi/iwl3945-base.c
drivers/net/wireless/p54/p54pci.c
net/mac80211/agg-tx.c
net/mac80211/mlme.c

index 4bd0aecc7713164656db82044df1804323c67666,0000000000000000000000000000000000000000..a27347425968a2de955f5af8694f45f18c676edf
mode 100644,000000..100644
--- /dev/null
@@@ -1,1502 -1,0 +1,1515 @@@
-               scan->good_CRC_th = 0;
 +/******************************************************************************
 + *
 + * GPL LICENSE SUMMARY
 + *
 + * Copyright(c) 2008 - 2010 Intel Corporation. All rights reserved.
 + *
 + * This program is free software; you can redistribute it and/or modify
 + * it under the terms of version 2 of the GNU General Public License as
 + * published by the Free Software Foundation.
 + *
 + * This program is distributed in the hope that it will be useful, but
 + * WITHOUT ANY WARRANTY; without even the implied warranty of
 + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 + * General Public License for more details.
 + *
 + * You should have received a copy of the GNU General Public License
 + * along with this program; if not, write to the Free Software
 + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
 + * USA
 + *
 + * The full GNU General Public License is included in this distribution
 + * in the file called LICENSE.GPL.
 + *
 + * Contact Information:
 + *  Intel Linux Wireless <ilw@linux.intel.com>
 + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
 + *
 + *****************************************************************************/
 +#include <linux/etherdevice.h>
 +#include <linux/kernel.h>
 +#include <linux/module.h>
 +#include <linux/init.h>
 +#include <linux/sched.h>
 +
 +#include "iwl-dev.h"
 +#include "iwl-core.h"
 +#include "iwl-io.h"
 +#include "iwl-helpers.h"
 +#include "iwl-agn-hw.h"
 +#include "iwl-agn.h"
 +
 +static inline u32 iwlagn_get_scd_ssn(struct iwl5000_tx_resp *tx_resp)
 +{
 +      return le32_to_cpup((__le32 *)&tx_resp->status +
 +                          tx_resp->frame_count) & MAX_SN;
 +}
 +
 +static int iwlagn_tx_status_reply_tx(struct iwl_priv *priv,
 +                                    struct iwl_ht_agg *agg,
 +                                    struct iwl5000_tx_resp *tx_resp,
 +                                    int txq_id, u16 start_idx)
 +{
 +      u16 status;
 +      struct agg_tx_status *frame_status = &tx_resp->status;
 +      struct ieee80211_tx_info *info = NULL;
 +      struct ieee80211_hdr *hdr = NULL;
 +      u32 rate_n_flags = le32_to_cpu(tx_resp->rate_n_flags);
 +      int i, sh, idx;
 +      u16 seq;
 +
 +      if (agg->wait_for_ba)
 +              IWL_DEBUG_TX_REPLY(priv, "got tx response w/o block-ack\n");
 +
 +      agg->frame_count = tx_resp->frame_count;
 +      agg->start_idx = start_idx;
 +      agg->rate_n_flags = rate_n_flags;
 +      agg->bitmap = 0;
 +
 +      /* # frames attempted by Tx command */
 +      if (agg->frame_count == 1) {
 +              /* Only one frame was attempted; no block-ack will arrive */
 +              status = le16_to_cpu(frame_status[0].status);
 +              idx = start_idx;
 +
 +              /* FIXME: code repetition */
 +              IWL_DEBUG_TX_REPLY(priv, "FrameCnt = %d, StartIdx=%d idx=%d\n",
 +                                 agg->frame_count, agg->start_idx, idx);
 +
 +              info = IEEE80211_SKB_CB(priv->txq[txq_id].txb[idx].skb[0]);
 +              info->status.rates[0].count = tx_resp->failure_frame + 1;
 +              info->flags &= ~IEEE80211_TX_CTL_AMPDU;
 +              info->flags |= iwl_tx_status_to_mac80211(status);
 +              iwlagn_hwrate_to_tx_control(priv, rate_n_flags, info);
 +
 +              /* FIXME: code repetition end */
 +
 +              IWL_DEBUG_TX_REPLY(priv, "1 Frame 0x%x failure :%d\n",
 +                                  status & 0xff, tx_resp->failure_frame);
 +              IWL_DEBUG_TX_REPLY(priv, "Rate Info rate_n_flags=%x\n", rate_n_flags);
 +
 +              agg->wait_for_ba = 0;
 +      } else {
 +              /* Two or more frames were attempted; expect block-ack */
 +              u64 bitmap = 0;
 +              int start = agg->start_idx;
 +
 +              /* Construct bit-map of pending frames within Tx window */
 +              for (i = 0; i < agg->frame_count; i++) {
 +                      u16 sc;
 +                      status = le16_to_cpu(frame_status[i].status);
 +                      seq  = le16_to_cpu(frame_status[i].sequence);
 +                      idx = SEQ_TO_INDEX(seq);
 +                      txq_id = SEQ_TO_QUEUE(seq);
 +
 +                      if (status & (AGG_TX_STATE_FEW_BYTES_MSK |
 +                                    AGG_TX_STATE_ABORT_MSK))
 +                              continue;
 +
 +                      IWL_DEBUG_TX_REPLY(priv, "FrameCnt = %d, txq_id=%d idx=%d\n",
 +                                         agg->frame_count, txq_id, idx);
 +
 +                      hdr = iwl_tx_queue_get_hdr(priv, txq_id, idx);
 +                      if (!hdr) {
 +                              IWL_ERR(priv,
 +                                      "BUG_ON idx doesn't point to valid skb"
 +                                      " idx=%d, txq_id=%d\n", idx, txq_id);
 +                              return -1;
 +                      }
 +
 +                      sc = le16_to_cpu(hdr->seq_ctrl);
 +                      if (idx != (SEQ_TO_SN(sc) & 0xff)) {
 +                              IWL_ERR(priv,
 +                                      "BUG_ON idx doesn't match seq control"
 +                                      " idx=%d, seq_idx=%d, seq=%d\n",
 +                                        idx, SEQ_TO_SN(sc),
 +                                        hdr->seq_ctrl);
 +                              return -1;
 +                      }
 +
 +                      IWL_DEBUG_TX_REPLY(priv, "AGG Frame i=%d idx %d seq=%d\n",
 +                                         i, idx, SEQ_TO_SN(sc));
 +
 +                      sh = idx - start;
 +                      if (sh > 64) {
 +                              sh = (start - idx) + 0xff;
 +                              bitmap = bitmap << sh;
 +                              sh = 0;
 +                              start = idx;
 +                      } else if (sh < -64)
 +                              sh  = 0xff - (start - idx);
 +                      else if (sh < 0) {
 +                              sh = start - idx;
 +                              start = idx;
 +                              bitmap = bitmap << sh;
 +                              sh = 0;
 +                      }
 +                      bitmap |= 1ULL << sh;
 +                      IWL_DEBUG_TX_REPLY(priv, "start=%d bitmap=0x%llx\n",
 +                                         start, (unsigned long long)bitmap);
 +              }
 +
 +              agg->bitmap = bitmap;
 +              agg->start_idx = start;
 +              IWL_DEBUG_TX_REPLY(priv, "Frames %d start_idx=%d bitmap=0x%llx\n",
 +                                 agg->frame_count, agg->start_idx,
 +                                 (unsigned long long)agg->bitmap);
 +
 +              if (bitmap)
 +                      agg->wait_for_ba = 1;
 +      }
 +      return 0;
 +}
 +
 +void iwl_check_abort_status(struct iwl_priv *priv,
 +                          u8 frame_count, u32 status)
 +{
 +      if (frame_count == 1 && status == TX_STATUS_FAIL_RFKILL_FLUSH) {
 +              IWL_ERR(priv, "TODO: Implement Tx flush command!!!\n");
 +      }
 +}
 +
 +static void iwlagn_rx_reply_tx(struct iwl_priv *priv,
 +                              struct iwl_rx_mem_buffer *rxb)
 +{
 +      struct iwl_rx_packet *pkt = rxb_addr(rxb);
 +      u16 sequence = le16_to_cpu(pkt->hdr.sequence);
 +      int txq_id = SEQ_TO_QUEUE(sequence);
 +      int index = SEQ_TO_INDEX(sequence);
 +      struct iwl_tx_queue *txq = &priv->txq[txq_id];
 +      struct ieee80211_tx_info *info;
 +      struct iwl5000_tx_resp *tx_resp = (void *)&pkt->u.raw[0];
 +      u32  status = le16_to_cpu(tx_resp->status.status);
 +      int tid;
 +      int sta_id;
 +      int freed;
 +
 +      if ((index >= txq->q.n_bd) || (iwl_queue_used(&txq->q, index) == 0)) {
 +              IWL_ERR(priv, "Read index for DMA queue txq_id (%d) index %d "
 +                        "is out of range [0-%d] %d %d\n", txq_id,
 +                        index, txq->q.n_bd, txq->q.write_ptr,
 +                        txq->q.read_ptr);
 +              return;
 +      }
 +
 +      info = IEEE80211_SKB_CB(txq->txb[txq->q.read_ptr].skb[0]);
 +      memset(&info->status, 0, sizeof(info->status));
 +
 +      tid = (tx_resp->ra_tid & IWL50_TX_RES_TID_MSK) >> IWL50_TX_RES_TID_POS;
 +      sta_id = (tx_resp->ra_tid & IWL50_TX_RES_RA_MSK) >> IWL50_TX_RES_RA_POS;
 +
 +      if (txq->sched_retry) {
 +              const u32 scd_ssn = iwlagn_get_scd_ssn(tx_resp);
 +              struct iwl_ht_agg *agg = NULL;
 +
 +              agg = &priv->stations[sta_id].tid[tid].agg;
 +
 +              iwlagn_tx_status_reply_tx(priv, agg, tx_resp, txq_id, index);
 +
 +              /* check if BAR is needed */
 +              if ((tx_resp->frame_count == 1) && !iwl_is_tx_success(status))
 +                      info->flags |= IEEE80211_TX_STAT_AMPDU_NO_BACK;
 +
 +              if (txq->q.read_ptr != (scd_ssn & 0xff)) {
 +                      index = iwl_queue_dec_wrap(scd_ssn & 0xff, txq->q.n_bd);
 +                      IWL_DEBUG_TX_REPLY(priv, "Retry scheduler reclaim "
 +                                      "scd_ssn=%d idx=%d txq=%d swq=%d\n",
 +                                      scd_ssn , index, txq_id, txq->swq_id);
 +
 +                      freed = iwlagn_tx_queue_reclaim(priv, txq_id, index);
 +                      iwl_free_tfds_in_queue(priv, sta_id, tid, freed);
 +
 +                      if (priv->mac80211_registered &&
 +                          (iwl_queue_space(&txq->q) > txq->q.low_mark) &&
 +                          (agg->state != IWL_EMPTYING_HW_QUEUE_DELBA)) {
 +                              if (agg->state == IWL_AGG_OFF)
 +                                      iwl_wake_queue(priv, txq_id);
 +                              else
 +                                      iwl_wake_queue(priv, txq->swq_id);
 +                      }
 +              }
 +      } else {
 +              BUG_ON(txq_id != txq->swq_id);
 +
 +              info->status.rates[0].count = tx_resp->failure_frame + 1;
 +              info->flags |= iwl_tx_status_to_mac80211(status);
 +              iwlagn_hwrate_to_tx_control(priv,
 +                                      le32_to_cpu(tx_resp->rate_n_flags),
 +                                      info);
 +
 +              IWL_DEBUG_TX_REPLY(priv, "TXQ %d status %s (0x%08x) rate_n_flags "
 +                                 "0x%x retries %d\n",
 +                                 txq_id,
 +                                 iwl_get_tx_fail_reason(status), status,
 +                                 le32_to_cpu(tx_resp->rate_n_flags),
 +                                 tx_resp->failure_frame);
 +
 +              freed = iwlagn_tx_queue_reclaim(priv, txq_id, index);
 +              iwl_free_tfds_in_queue(priv, sta_id, tid, freed);
 +
 +              if (priv->mac80211_registered &&
 +                  (iwl_queue_space(&txq->q) > txq->q.low_mark))
 +                      iwl_wake_queue(priv, txq_id);
 +      }
 +
 +      iwlagn_txq_check_empty(priv, sta_id, tid, txq_id);
 +
 +      iwl_check_abort_status(priv, tx_resp->frame_count, status);
 +}
 +
 +void iwlagn_rx_handler_setup(struct iwl_priv *priv)
 +{
 +      /* init calibration handlers */
 +      priv->rx_handlers[CALIBRATION_RES_NOTIFICATION] =
 +                                      iwlagn_rx_calib_result;
 +      priv->rx_handlers[CALIBRATION_COMPLETE_NOTIFICATION] =
 +                                      iwlagn_rx_calib_complete;
 +      priv->rx_handlers[REPLY_TX] = iwlagn_rx_reply_tx;
 +}
 +
 +void iwlagn_setup_deferred_work(struct iwl_priv *priv)
 +{
 +      /* in agn, the tx power calibration is done in uCode */
 +      priv->disable_tx_power_cal = 1;
 +}
 +
 +int iwlagn_hw_valid_rtc_data_addr(u32 addr)
 +{
 +      return (addr >= IWLAGN_RTC_DATA_LOWER_BOUND) &&
 +              (addr < IWLAGN_RTC_DATA_UPPER_BOUND);
 +}
 +
 +int iwlagn_send_tx_power(struct iwl_priv *priv)
 +{
 +      struct iwl5000_tx_power_dbm_cmd tx_power_cmd;
 +      u8 tx_ant_cfg_cmd;
 +
 +      /* half dBm need to multiply */
 +      tx_power_cmd.global_lmt = (s8)(2 * priv->tx_power_user_lmt);
 +
 +      if (priv->tx_power_lmt_in_half_dbm &&
 +          priv->tx_power_lmt_in_half_dbm < tx_power_cmd.global_lmt) {
 +              /*
 +               * For the newer devices which using enhanced/extend tx power
 +               * table in EEPROM, the format is in half dBm. driver need to
 +               * convert to dBm format before report to mac80211.
 +               * By doing so, there is a possibility of 1/2 dBm resolution
 +               * lost. driver will perform "round-up" operation before
 +               * reporting, but it will cause 1/2 dBm tx power over the
 +               * regulatory limit. Perform the checking here, if the
 +               * "tx_power_user_lmt" is higher than EEPROM value (in
 +               * half-dBm format), lower the tx power based on EEPROM
 +               */
 +              tx_power_cmd.global_lmt = priv->tx_power_lmt_in_half_dbm;
 +      }
 +      tx_power_cmd.flags = IWL50_TX_POWER_NO_CLOSED;
 +      tx_power_cmd.srv_chan_lmt = IWL50_TX_POWER_AUTO;
 +
 +      if (IWL_UCODE_API(priv->ucode_ver) == 1)
 +              tx_ant_cfg_cmd = REPLY_TX_POWER_DBM_CMD_V1;
 +      else
 +              tx_ant_cfg_cmd = REPLY_TX_POWER_DBM_CMD;
 +
 +      return  iwl_send_cmd_pdu_async(priv, tx_ant_cfg_cmd,
 +                                     sizeof(tx_power_cmd), &tx_power_cmd,
 +                                     NULL);
 +}
 +
 +void iwlagn_temperature(struct iwl_priv *priv)
 +{
 +      /* store temperature from statistics (in Celsius) */
 +      priv->temperature = le32_to_cpu(priv->statistics.general.temperature);
 +      iwl_tt_handler(priv);
 +}
 +
 +u16 iwlagn_eeprom_calib_version(struct iwl_priv *priv)
 +{
 +      struct iwl_eeprom_calib_hdr {
 +              u8 version;
 +              u8 pa_type;
 +              u16 voltage;
 +      } *hdr;
 +
 +      hdr = (struct iwl_eeprom_calib_hdr *)iwl_eeprom_query_addr(priv,
 +                                                      EEPROM_CALIB_ALL);
 +      return hdr->version;
 +
 +}
 +
 +/*
 + * EEPROM
 + */
 +static u32 eeprom_indirect_address(const struct iwl_priv *priv, u32 address)
 +{
 +      u16 offset = 0;
 +
 +      if ((address & INDIRECT_ADDRESS) == 0)
 +              return address;
 +
 +      switch (address & INDIRECT_TYPE_MSK) {
 +      case INDIRECT_HOST:
 +              offset = iwl_eeprom_query16(priv, EEPROM_LINK_HOST);
 +              break;
 +      case INDIRECT_GENERAL:
 +              offset = iwl_eeprom_query16(priv, EEPROM_LINK_GENERAL);
 +              break;
 +      case INDIRECT_REGULATORY:
 +              offset = iwl_eeprom_query16(priv, EEPROM_LINK_REGULATORY);
 +              break;
 +      case INDIRECT_CALIBRATION:
 +              offset = iwl_eeprom_query16(priv, EEPROM_LINK_CALIBRATION);
 +              break;
 +      case INDIRECT_PROCESS_ADJST:
 +              offset = iwl_eeprom_query16(priv, EEPROM_LINK_PROCESS_ADJST);
 +              break;
 +      case INDIRECT_OTHERS:
 +              offset = iwl_eeprom_query16(priv, EEPROM_LINK_OTHERS);
 +              break;
 +      default:
 +              IWL_ERR(priv, "illegal indirect type: 0x%X\n",
 +              address & INDIRECT_TYPE_MSK);
 +              break;
 +      }
 +
 +      /* translate the offset from words to byte */
 +      return (address & ADDRESS_MSK) + (offset << 1);
 +}
 +
 +const u8 *iwlagn_eeprom_query_addr(const struct iwl_priv *priv,
 +                                         size_t offset)
 +{
 +      u32 address = eeprom_indirect_address(priv, offset);
 +      BUG_ON(address >= priv->cfg->eeprom_size);
 +      return &priv->eeprom[address];
 +}
 +
 +struct iwl_mod_params iwlagn_mod_params = {
 +      .amsdu_size_8K = 1,
 +      .restart_fw = 1,
 +      /* the rest are 0 by default */
 +};
 +
 +void iwlagn_rx_queue_reset(struct iwl_priv *priv, struct iwl_rx_queue *rxq)
 +{
 +      unsigned long flags;
 +      int i;
 +      spin_lock_irqsave(&rxq->lock, flags);
 +      INIT_LIST_HEAD(&rxq->rx_free);
 +      INIT_LIST_HEAD(&rxq->rx_used);
 +      /* Fill the rx_used queue with _all_ of the Rx buffers */
 +      for (i = 0; i < RX_FREE_BUFFERS + RX_QUEUE_SIZE; i++) {
 +              /* In the reset function, these buffers may have been allocated
 +               * to an SKB, so we need to unmap and free potential storage */
 +              if (rxq->pool[i].page != NULL) {
 +                      pci_unmap_page(priv->pci_dev, rxq->pool[i].page_dma,
 +                              PAGE_SIZE << priv->hw_params.rx_page_order,
 +                              PCI_DMA_FROMDEVICE);
 +                      __iwl_free_pages(priv, rxq->pool[i].page);
 +                      rxq->pool[i].page = NULL;
 +              }
 +              list_add_tail(&rxq->pool[i].list, &rxq->rx_used);
 +      }
 +
 +      for (i = 0; i < RX_QUEUE_SIZE; i++)
 +              rxq->queue[i] = NULL;
 +
 +      /* Set us so that we have processed and used all buffers, but have
 +       * not restocked the Rx queue with fresh buffers */
 +      rxq->read = rxq->write = 0;
 +      rxq->write_actual = 0;
 +      rxq->free_count = 0;
 +      spin_unlock_irqrestore(&rxq->lock, flags);
 +}
 +
 +int iwlagn_rx_init(struct iwl_priv *priv, struct iwl_rx_queue *rxq)
 +{
 +      u32 rb_size;
 +      const u32 rfdnlog = RX_QUEUE_SIZE_LOG; /* 256 RBDs */
 +      u32 rb_timeout = 0; /* FIXME: RX_RB_TIMEOUT for all devices? */
 +
 +      if (!priv->cfg->use_isr_legacy)
 +              rb_timeout = RX_RB_TIMEOUT;
 +
 +      if (priv->cfg->mod_params->amsdu_size_8K)
 +              rb_size = FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_8K;
 +      else
 +              rb_size = FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_4K;
 +
 +      /* Stop Rx DMA */
 +      iwl_write_direct32(priv, FH_MEM_RCSR_CHNL0_CONFIG_REG, 0);
 +
 +      /* Reset driver's Rx queue write index */
 +      iwl_write_direct32(priv, FH_RSCSR_CHNL0_RBDCB_WPTR_REG, 0);
 +
 +      /* Tell device where to find RBD circular buffer in DRAM */
 +      iwl_write_direct32(priv, FH_RSCSR_CHNL0_RBDCB_BASE_REG,
 +                         (u32)(rxq->dma_addr >> 8));
 +
 +      /* Tell device where in DRAM to update its Rx status */
 +      iwl_write_direct32(priv, FH_RSCSR_CHNL0_STTS_WPTR_REG,
 +                         rxq->rb_stts_dma >> 4);
 +
 +      /* Enable Rx DMA
 +       * FH_RCSR_CHNL0_RX_IGNORE_RXF_EMPTY is set because of HW bug in
 +       *      the credit mechanism in 5000 HW RX FIFO
 +       * Direct rx interrupts to hosts
 +       * Rx buffer size 4 or 8k
 +       * RB timeout 0x10
 +       * 256 RBDs
 +       */
 +      iwl_write_direct32(priv, FH_MEM_RCSR_CHNL0_CONFIG_REG,
 +                         FH_RCSR_RX_CONFIG_CHNL_EN_ENABLE_VAL |
 +                         FH_RCSR_CHNL0_RX_IGNORE_RXF_EMPTY |
 +                         FH_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_INT_HOST_VAL |
 +                         FH_RCSR_CHNL0_RX_CONFIG_SINGLE_FRAME_MSK |
 +                         rb_size|
 +                         (rb_timeout << FH_RCSR_RX_CONFIG_REG_IRQ_RBTH_POS)|
 +                         (rfdnlog << FH_RCSR_RX_CONFIG_RBDCB_SIZE_POS));
 +
 +      /* Set interrupt coalescing timer to default (2048 usecs) */
 +      iwl_write8(priv, CSR_INT_COALESCING, IWL_HOST_INT_TIMEOUT_DEF);
 +
 +      return 0;
 +}
 +
 +int iwlagn_hw_nic_init(struct iwl_priv *priv)
 +{
 +      unsigned long flags;
 +      struct iwl_rx_queue *rxq = &priv->rxq;
 +      int ret;
 +
 +      /* nic_init */
 +      spin_lock_irqsave(&priv->lock, flags);
 +      priv->cfg->ops->lib->apm_ops.init(priv);
 +
 +      /* Set interrupt coalescing calibration timer to default (512 usecs) */
 +      iwl_write8(priv, CSR_INT_COALESCING, IWL_HOST_INT_CALIB_TIMEOUT_DEF);
 +
 +      spin_unlock_irqrestore(&priv->lock, flags);
 +
 +      ret = priv->cfg->ops->lib->apm_ops.set_pwr_src(priv, IWL_PWR_SRC_VMAIN);
 +
 +      priv->cfg->ops->lib->apm_ops.config(priv);
 +
 +      /* Allocate the RX queue, or reset if it is already allocated */
 +      if (!rxq->bd) {
 +              ret = iwl_rx_queue_alloc(priv);
 +              if (ret) {
 +                      IWL_ERR(priv, "Unable to initialize Rx queue\n");
 +                      return -ENOMEM;
 +              }
 +      } else
 +              iwlagn_rx_queue_reset(priv, rxq);
 +
 +      iwlagn_rx_replenish(priv);
 +
 +      iwlagn_rx_init(priv, rxq);
 +
 +      spin_lock_irqsave(&priv->lock, flags);
 +
 +      rxq->need_update = 1;
 +      iwl_rx_queue_update_write_ptr(priv, rxq);
 +
 +      spin_unlock_irqrestore(&priv->lock, flags);
 +
 +      /* Allocate or reset and init all Tx and Command queues */
 +      if (!priv->txq) {
 +              ret = iwlagn_txq_ctx_alloc(priv);
 +              if (ret)
 +                      return ret;
 +      } else
 +              iwlagn_txq_ctx_reset(priv);
 +
 +      set_bit(STATUS_INIT, &priv->status);
 +
 +      return 0;
 +}
 +
 +/**
 + * iwlagn_dma_addr2rbd_ptr - convert a DMA address to a uCode read buffer ptr
 + */
 +static inline __le32 iwlagn_dma_addr2rbd_ptr(struct iwl_priv *priv,
 +                                        dma_addr_t dma_addr)
 +{
 +      return cpu_to_le32((u32)(dma_addr >> 8));
 +}
 +
 +/**
 + * iwlagn_rx_queue_restock - refill RX queue from pre-allocated pool
 + *
 + * If there are slots in the RX queue that need to be restocked,
 + * and we have free pre-allocated buffers, fill the ranks as much
 + * as we can, pulling from rx_free.
 + *
 + * This moves the 'write' index forward to catch up with 'processed', and
 + * also updates the memory address in the firmware to reference the new
 + * target buffer.
 + */
 +void iwlagn_rx_queue_restock(struct iwl_priv *priv)
 +{
 +      struct iwl_rx_queue *rxq = &priv->rxq;
 +      struct list_head *element;
 +      struct iwl_rx_mem_buffer *rxb;
 +      unsigned long flags;
 +
 +      spin_lock_irqsave(&rxq->lock, flags);
 +      while ((iwl_rx_queue_space(rxq) > 0) && (rxq->free_count)) {
 +              /* The overwritten rxb must be a used one */
 +              rxb = rxq->queue[rxq->write];
 +              BUG_ON(rxb && rxb->page);
 +
 +              /* Get next free Rx buffer, remove from free list */
 +              element = rxq->rx_free.next;
 +              rxb = list_entry(element, struct iwl_rx_mem_buffer, list);
 +              list_del(element);
 +
 +              /* Point to Rx buffer via next RBD in circular buffer */
 +              rxq->bd[rxq->write] = iwlagn_dma_addr2rbd_ptr(priv,
 +                                                            rxb->page_dma);
 +              rxq->queue[rxq->write] = rxb;
 +              rxq->write = (rxq->write + 1) & RX_QUEUE_MASK;
 +              rxq->free_count--;
 +      }
 +      spin_unlock_irqrestore(&rxq->lock, flags);
 +      /* If the pre-allocated buffer pool is dropping low, schedule to
 +       * refill it */
 +      if (rxq->free_count <= RX_LOW_WATERMARK)
 +              queue_work(priv->workqueue, &priv->rx_replenish);
 +
 +
 +      /* If we've added more space for the firmware to place data, tell it.
 +       * Increment device's write pointer in multiples of 8. */
 +      if (rxq->write_actual != (rxq->write & ~0x7)) {
 +              spin_lock_irqsave(&rxq->lock, flags);
 +              rxq->need_update = 1;
 +              spin_unlock_irqrestore(&rxq->lock, flags);
 +              iwl_rx_queue_update_write_ptr(priv, rxq);
 +      }
 +}
 +
 +/**
 + * iwlagn_rx_replenish - Move all used packet from rx_used to rx_free
 + *
 + * When moving to rx_free an SKB is allocated for the slot.
 + *
 + * Also restock the Rx queue via iwl_rx_queue_restock.
 + * This is called as a scheduled work item (except for during initialization)
 + */
 +void iwlagn_rx_allocate(struct iwl_priv *priv, gfp_t priority)
 +{
 +      struct iwl_rx_queue *rxq = &priv->rxq;
 +      struct list_head *element;
 +      struct iwl_rx_mem_buffer *rxb;
 +      struct page *page;
 +      unsigned long flags;
 +      gfp_t gfp_mask = priority;
 +
 +      while (1) {
 +              spin_lock_irqsave(&rxq->lock, flags);
 +              if (list_empty(&rxq->rx_used)) {
 +                      spin_unlock_irqrestore(&rxq->lock, flags);
 +                      return;
 +              }
 +              spin_unlock_irqrestore(&rxq->lock, flags);
 +
 +              if (rxq->free_count > RX_LOW_WATERMARK)
 +                      gfp_mask |= __GFP_NOWARN;
 +
 +              if (priv->hw_params.rx_page_order > 0)
 +                      gfp_mask |= __GFP_COMP;
 +
 +              /* Alloc a new receive buffer */
 +              page = alloc_pages(gfp_mask, priv->hw_params.rx_page_order);
 +              if (!page) {
 +                      if (net_ratelimit())
 +                              IWL_DEBUG_INFO(priv, "alloc_pages failed, "
 +                                             "order: %d\n",
 +                                             priv->hw_params.rx_page_order);
 +
 +                      if ((rxq->free_count <= RX_LOW_WATERMARK) &&
 +                          net_ratelimit())
 +                              IWL_CRIT(priv, "Failed to alloc_pages with %s. Only %u free buffers remaining.\n",
 +                                       priority == GFP_ATOMIC ?  "GFP_ATOMIC" : "GFP_KERNEL",
 +                                       rxq->free_count);
 +                      /* We don't reschedule replenish work here -- we will
 +                       * call the restock method and if it still needs
 +                       * more buffers it will schedule replenish */
 +                      return;
 +              }
 +
 +              spin_lock_irqsave(&rxq->lock, flags);
 +
 +              if (list_empty(&rxq->rx_used)) {
 +                      spin_unlock_irqrestore(&rxq->lock, flags);
 +                      __free_pages(page, priv->hw_params.rx_page_order);
 +                      return;
 +              }
 +              element = rxq->rx_used.next;
 +              rxb = list_entry(element, struct iwl_rx_mem_buffer, list);
 +              list_del(element);
 +
 +              spin_unlock_irqrestore(&rxq->lock, flags);
 +
 +              BUG_ON(rxb->page);
 +              rxb->page = page;
 +              /* Get physical address of the RB */
 +              rxb->page_dma = pci_map_page(priv->pci_dev, page, 0,
 +                              PAGE_SIZE << priv->hw_params.rx_page_order,
 +                              PCI_DMA_FROMDEVICE);
 +              /* dma address must be no more than 36 bits */
 +              BUG_ON(rxb->page_dma & ~DMA_BIT_MASK(36));
 +              /* and also 256 byte aligned! */
 +              BUG_ON(rxb->page_dma & DMA_BIT_MASK(8));
 +
 +              spin_lock_irqsave(&rxq->lock, flags);
 +
 +              list_add_tail(&rxb->list, &rxq->rx_free);
 +              rxq->free_count++;
 +              priv->alloc_rxb_page++;
 +
 +              spin_unlock_irqrestore(&rxq->lock, flags);
 +      }
 +}
 +
 +void iwlagn_rx_replenish(struct iwl_priv *priv)
 +{
 +      unsigned long flags;
 +
 +      iwlagn_rx_allocate(priv, GFP_KERNEL);
 +
 +      spin_lock_irqsave(&priv->lock, flags);
 +      iwlagn_rx_queue_restock(priv);
 +      spin_unlock_irqrestore(&priv->lock, flags);
 +}
 +
 +void iwlagn_rx_replenish_now(struct iwl_priv *priv)
 +{
 +      iwlagn_rx_allocate(priv, GFP_ATOMIC);
 +
 +      iwlagn_rx_queue_restock(priv);
 +}
 +
 +/* Assumes that the skb field of the buffers in 'pool' is kept accurate.
 + * If an SKB has been detached, the POOL needs to have its SKB set to NULL
 + * This free routine walks the list of POOL entries and if SKB is set to
 + * non NULL it is unmapped and freed
 + */
 +void iwlagn_rx_queue_free(struct iwl_priv *priv, struct iwl_rx_queue *rxq)
 +{
 +      int i;
 +      for (i = 0; i < RX_QUEUE_SIZE + RX_FREE_BUFFERS; i++) {
 +              if (rxq->pool[i].page != NULL) {
 +                      pci_unmap_page(priv->pci_dev, rxq->pool[i].page_dma,
 +                              PAGE_SIZE << priv->hw_params.rx_page_order,
 +                              PCI_DMA_FROMDEVICE);
 +                      __iwl_free_pages(priv, rxq->pool[i].page);
 +                      rxq->pool[i].page = NULL;
 +              }
 +      }
 +
 +      dma_free_coherent(&priv->pci_dev->dev, 4 * RX_QUEUE_SIZE, rxq->bd,
 +                        rxq->dma_addr);
 +      dma_free_coherent(&priv->pci_dev->dev, sizeof(struct iwl_rb_status),
 +                        rxq->rb_stts, rxq->rb_stts_dma);
 +      rxq->bd = NULL;
 +      rxq->rb_stts  = NULL;
 +}
 +
 +int iwlagn_rxq_stop(struct iwl_priv *priv)
 +{
 +
 +      /* stop Rx DMA */
 +      iwl_write_direct32(priv, FH_MEM_RCSR_CHNL0_CONFIG_REG, 0);
 +      iwl_poll_direct_bit(priv, FH_MEM_RSSR_RX_STATUS_REG,
 +                          FH_RSSR_CHNL0_RX_STATUS_CHNL_IDLE, 1000);
 +
 +      return 0;
 +}
 +
 +int iwlagn_hwrate_to_mac80211_idx(u32 rate_n_flags, enum ieee80211_band band)
 +{
 +      int idx = 0;
 +      int band_offset = 0;
 +
 +      /* HT rate format: mac80211 wants an MCS number, which is just LSB */
 +      if (rate_n_flags & RATE_MCS_HT_MSK) {
 +              idx = (rate_n_flags & 0xff);
 +              return idx;
 +      /* Legacy rate format, search for match in table */
 +      } else {
 +              if (band == IEEE80211_BAND_5GHZ)
 +                      band_offset = IWL_FIRST_OFDM_RATE;
 +              for (idx = band_offset; idx < IWL_RATE_COUNT_LEGACY; idx++)
 +                      if (iwl_rates[idx].plcp == (rate_n_flags & 0xFF))
 +                              return idx - band_offset;
 +      }
 +
 +      return -1;
 +}
 +
 +/* Calc max signal level (dBm) among 3 possible receivers */
 +static inline int iwlagn_calc_rssi(struct iwl_priv *priv,
 +                              struct iwl_rx_phy_res *rx_resp)
 +{
 +      return priv->cfg->ops->utils->calc_rssi(priv, rx_resp);
 +}
 +
 +#ifdef CONFIG_IWLWIFI_DEBUG
 +/**
 + * iwlagn_dbg_report_frame - dump frame to syslog during debug sessions
 + *
 + * You may hack this function to show different aspects of received frames,
 + * including selective frame dumps.
 + * group100 parameter selects whether to show 1 out of 100 good data frames.
 + *    All beacon and probe response frames are printed.
 + */
 +static void iwlagn_dbg_report_frame(struct iwl_priv *priv,
 +                    struct iwl_rx_phy_res *phy_res, u16 length,
 +                    struct ieee80211_hdr *header, int group100)
 +{
 +      u32 to_us;
 +      u32 print_summary = 0;
 +      u32 print_dump = 0;     /* set to 1 to dump all frames' contents */
 +      u32 hundred = 0;
 +      u32 dataframe = 0;
 +      __le16 fc;
 +      u16 seq_ctl;
 +      u16 channel;
 +      u16 phy_flags;
 +      u32 rate_n_flags;
 +      u32 tsf_low;
 +      int rssi;
 +
 +      if (likely(!(iwl_get_debug_level(priv) & IWL_DL_RX)))
 +              return;
 +
 +      /* MAC header */
 +      fc = header->frame_control;
 +      seq_ctl = le16_to_cpu(header->seq_ctrl);
 +
 +      /* metadata */
 +      channel = le16_to_cpu(phy_res->channel);
 +      phy_flags = le16_to_cpu(phy_res->phy_flags);
 +      rate_n_flags = le32_to_cpu(phy_res->rate_n_flags);
 +
 +      /* signal statistics */
 +      rssi = iwlagn_calc_rssi(priv, phy_res);
 +      tsf_low = le64_to_cpu(phy_res->timestamp) & 0x0ffffffff;
 +
 +      to_us = !compare_ether_addr(header->addr1, priv->mac_addr);
 +
 +      /* if data frame is to us and all is good,
 +       *   (optionally) print summary for only 1 out of every 100 */
 +      if (to_us && (fc & ~cpu_to_le16(IEEE80211_FCTL_PROTECTED)) ==
 +          cpu_to_le16(IEEE80211_FCTL_FROMDS | IEEE80211_FTYPE_DATA)) {
 +              dataframe = 1;
 +              if (!group100)
 +                      print_summary = 1;      /* print each frame */
 +              else if (priv->framecnt_to_us < 100) {
 +                      priv->framecnt_to_us++;
 +                      print_summary = 0;
 +              } else {
 +                      priv->framecnt_to_us = 0;
 +                      print_summary = 1;
 +                      hundred = 1;
 +              }
 +      } else {
 +              /* print summary for all other frames */
 +              print_summary = 1;
 +      }
 +
 +      if (print_summary) {
 +              char *title;
 +              int rate_idx;
 +              u32 bitrate;
 +
 +              if (hundred)
 +                      title = "100Frames";
 +              else if (ieee80211_has_retry(fc))
 +                      title = "Retry";
 +              else if (ieee80211_is_assoc_resp(fc))
 +                      title = "AscRsp";
 +              else if (ieee80211_is_reassoc_resp(fc))
 +                      title = "RasRsp";
 +              else if (ieee80211_is_probe_resp(fc)) {
 +                      title = "PrbRsp";
 +                      print_dump = 1; /* dump frame contents */
 +              } else if (ieee80211_is_beacon(fc)) {
 +                      title = "Beacon";
 +                      print_dump = 1; /* dump frame contents */
 +              } else if (ieee80211_is_atim(fc))
 +                      title = "ATIM";
 +              else if (ieee80211_is_auth(fc))
 +                      title = "Auth";
 +              else if (ieee80211_is_deauth(fc))
 +                      title = "DeAuth";
 +              else if (ieee80211_is_disassoc(fc))
 +                      title = "DisAssoc";
 +              else
 +                      title = "Frame";
 +
 +              rate_idx = iwl_hwrate_to_plcp_idx(rate_n_flags);
 +              if (unlikely((rate_idx < 0) || (rate_idx >= IWL_RATE_COUNT))) {
 +                      bitrate = 0;
 +                      WARN_ON_ONCE(1);
 +              } else {
 +                      bitrate = iwl_rates[rate_idx].ieee / 2;
 +              }
 +
 +              /* print frame summary.
 +               * MAC addresses show just the last byte (for brevity),
 +               *    but you can hack it to show more, if you'd like to. */
 +              if (dataframe)
 +                      IWL_DEBUG_RX(priv, "%s: mhd=0x%04x, dst=0x%02x, "
 +                                   "len=%u, rssi=%d, chnl=%d, rate=%u,\n",
 +                                   title, le16_to_cpu(fc), header->addr1[5],
 +                                   length, rssi, channel, bitrate);
 +              else {
 +                      /* src/dst addresses assume managed mode */
 +                      IWL_DEBUG_RX(priv, "%s: 0x%04x, dst=0x%02x, src=0x%02x, "
 +                                   "len=%u, rssi=%d, tim=%lu usec, "
 +                                   "phy=0x%02x, chnl=%d\n",
 +                                   title, le16_to_cpu(fc), header->addr1[5],
 +                                   header->addr3[5], length, rssi,
 +                                   tsf_low - priv->scan_start_tsf,
 +                                   phy_flags, channel);
 +              }
 +      }
 +      if (print_dump)
 +              iwl_print_hex_dump(priv, IWL_DL_RX, header, length);
 +}
 +#endif
 +
 +static u32 iwlagn_translate_rx_status(struct iwl_priv *priv, u32 decrypt_in)
 +{
 +      u32 decrypt_out = 0;
 +
 +      if ((decrypt_in & RX_RES_STATUS_STATION_FOUND) ==
 +                                      RX_RES_STATUS_STATION_FOUND)
 +              decrypt_out |= (RX_RES_STATUS_STATION_FOUND |
 +                              RX_RES_STATUS_NO_STATION_INFO_MISMATCH);
 +
 +      decrypt_out |= (decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK);
 +
 +      /* packet was not encrypted */
 +      if ((decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK) ==
 +                                      RX_RES_STATUS_SEC_TYPE_NONE)
 +              return decrypt_out;
 +
 +      /* packet was encrypted with unknown alg */
 +      if ((decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK) ==
 +                                      RX_RES_STATUS_SEC_TYPE_ERR)
 +              return decrypt_out;
 +
 +      /* decryption was not done in HW */
 +      if ((decrypt_in & RX_MPDU_RES_STATUS_DEC_DONE_MSK) !=
 +                                      RX_MPDU_RES_STATUS_DEC_DONE_MSK)
 +              return decrypt_out;
 +
 +      switch (decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK) {
 +
 +      case RX_RES_STATUS_SEC_TYPE_CCMP:
 +              /* alg is CCM: check MIC only */
 +              if (!(decrypt_in & RX_MPDU_RES_STATUS_MIC_OK))
 +                      /* Bad MIC */
 +                      decrypt_out |= RX_RES_STATUS_BAD_ICV_MIC;
 +              else
 +                      decrypt_out |= RX_RES_STATUS_DECRYPT_OK;
 +
 +              break;
 +
 +      case RX_RES_STATUS_SEC_TYPE_TKIP:
 +              if (!(decrypt_in & RX_MPDU_RES_STATUS_TTAK_OK)) {
 +                      /* Bad TTAK */
 +                      decrypt_out |= RX_RES_STATUS_BAD_KEY_TTAK;
 +                      break;
 +              }
 +              /* fall through if TTAK OK */
 +      default:
 +              if (!(decrypt_in & RX_MPDU_RES_STATUS_ICV_OK))
 +                      decrypt_out |= RX_RES_STATUS_BAD_ICV_MIC;
 +              else
 +                      decrypt_out |= RX_RES_STATUS_DECRYPT_OK;
 +              break;
 +      };
 +
 +      IWL_DEBUG_RX(priv, "decrypt_in:0x%x  decrypt_out = 0x%x\n",
 +                                      decrypt_in, decrypt_out);
 +
 +      return decrypt_out;
 +}
 +
 +static void iwlagn_pass_packet_to_mac80211(struct iwl_priv *priv,
 +                                      struct ieee80211_hdr *hdr,
 +                                      u16 len,
 +                                      u32 ampdu_status,
 +                                      struct iwl_rx_mem_buffer *rxb,
 +                                      struct ieee80211_rx_status *stats)
 +{
 +      struct sk_buff *skb;
 +      __le16 fc = hdr->frame_control;
 +
 +      /* We only process data packets if the interface is open */
 +      if (unlikely(!priv->is_open)) {
 +              IWL_DEBUG_DROP_LIMIT(priv,
 +                  "Dropping packet while interface is not open.\n");
 +              return;
 +      }
 +
 +      /* In case of HW accelerated crypto and bad decryption, drop */
 +      if (!priv->cfg->mod_params->sw_crypto &&
 +          iwl_set_decrypted_flag(priv, hdr, ampdu_status, stats))
 +              return;
 +
 +      skb = dev_alloc_skb(128);
 +      if (!skb) {
 +              IWL_ERR(priv, "dev_alloc_skb failed\n");
 +              return;
 +      }
 +
 +      skb_add_rx_frag(skb, 0, rxb->page, (void *)hdr - rxb_addr(rxb), len);
 +
 +      iwl_update_stats(priv, false, fc, len);
 +      memcpy(IEEE80211_SKB_RXCB(skb), stats, sizeof(*stats));
 +
 +      ieee80211_rx(priv->hw, skb);
 +      priv->alloc_rxb_page--;
 +      rxb->page = NULL;
 +}
 +
 +/* Called for REPLY_RX (legacy ABG frames), or
 + * REPLY_RX_MPDU_CMD (HT high-throughput N frames). */
 +void iwlagn_rx_reply_rx(struct iwl_priv *priv,
 +                              struct iwl_rx_mem_buffer *rxb)
 +{
 +      struct ieee80211_hdr *header;
 +      struct ieee80211_rx_status rx_status;
 +      struct iwl_rx_packet *pkt = rxb_addr(rxb);
 +      struct iwl_rx_phy_res *phy_res;
 +      __le32 rx_pkt_status;
 +      struct iwl4965_rx_mpdu_res_start *amsdu;
 +      u32 len;
 +      u32 ampdu_status;
 +      u32 rate_n_flags;
 +
 +      /**
 +       * REPLY_RX and REPLY_RX_MPDU_CMD are handled differently.
 +       *      REPLY_RX: physical layer info is in this buffer
 +       *      REPLY_RX_MPDU_CMD: physical layer info was sent in separate
 +       *              command and cached in priv->last_phy_res
 +       *
 +       * Here we set up local variables depending on which command is
 +       * received.
 +       */
 +      if (pkt->hdr.cmd == REPLY_RX) {
 +              phy_res = (struct iwl_rx_phy_res *)pkt->u.raw;
 +              header = (struct ieee80211_hdr *)(pkt->u.raw + sizeof(*phy_res)
 +                              + phy_res->cfg_phy_cnt);
 +
 +              len = le16_to_cpu(phy_res->byte_count);
 +              rx_pkt_status = *(__le32 *)(pkt->u.raw + sizeof(*phy_res) +
 +                              phy_res->cfg_phy_cnt + len);
 +              ampdu_status = le32_to_cpu(rx_pkt_status);
 +      } else {
 +              if (!priv->_agn.last_phy_res_valid) {
 +                      IWL_ERR(priv, "MPDU frame without cached PHY data\n");
 +                      return;
 +              }
 +              phy_res = &priv->_agn.last_phy_res;
 +              amsdu = (struct iwl4965_rx_mpdu_res_start *)pkt->u.raw;
 +              header = (struct ieee80211_hdr *)(pkt->u.raw + sizeof(*amsdu));
 +              len = le16_to_cpu(amsdu->byte_count);
 +              rx_pkt_status = *(__le32 *)(pkt->u.raw + sizeof(*amsdu) + len);
 +              ampdu_status = iwlagn_translate_rx_status(priv,
 +                              le32_to_cpu(rx_pkt_status));
 +      }
 +
 +      if ((unlikely(phy_res->cfg_phy_cnt > 20))) {
 +              IWL_DEBUG_DROP(priv, "dsp size out of range [0,20]: %d/n",
 +                              phy_res->cfg_phy_cnt);
 +              return;
 +      }
 +
 +      if (!(rx_pkt_status & RX_RES_STATUS_NO_CRC32_ERROR) ||
 +          !(rx_pkt_status & RX_RES_STATUS_NO_RXE_OVERFLOW)) {
 +              IWL_DEBUG_RX(priv, "Bad CRC or FIFO: 0x%08X.\n",
 +                              le32_to_cpu(rx_pkt_status));
 +              return;
 +      }
 +
 +      /* This will be used in several places later */
 +      rate_n_flags = le32_to_cpu(phy_res->rate_n_flags);
 +
 +      /* rx_status carries information about the packet to mac80211 */
 +      rx_status.mactime = le64_to_cpu(phy_res->timestamp);
 +      rx_status.freq =
 +              ieee80211_channel_to_frequency(le16_to_cpu(phy_res->channel));
 +      rx_status.band = (phy_res->phy_flags & RX_RES_PHY_FLAGS_BAND_24_MSK) ?
 +                              IEEE80211_BAND_2GHZ : IEEE80211_BAND_5GHZ;
 +      rx_status.rate_idx =
 +              iwlagn_hwrate_to_mac80211_idx(rate_n_flags, rx_status.band);
 +      rx_status.flag = 0;
 +
 +      /* TSF isn't reliable. In order to allow smooth user experience,
 +       * this W/A doesn't propagate it to the mac80211 */
 +      /*rx_status.flag |= RX_FLAG_TSFT;*/
 +
 +      priv->ucode_beacon_time = le32_to_cpu(phy_res->beacon_time_stamp);
 +
 +      /* Find max signal strength (dBm) among 3 antenna/receiver chains */
 +      rx_status.signal = iwlagn_calc_rssi(priv, phy_res);
 +
 +#ifdef CONFIG_IWLWIFI_DEBUG
 +      /* Set "1" to report good data frames in groups of 100 */
 +      if (unlikely(iwl_get_debug_level(priv) & IWL_DL_RX))
 +              iwlagn_dbg_report_frame(priv, phy_res, len, header, 1);
 +#endif
 +      iwl_dbg_log_rx_data_frame(priv, len, header);
 +      IWL_DEBUG_STATS_LIMIT(priv, "Rssi %d, TSF %llu\n",
 +              rx_status.signal, (unsigned long long)rx_status.mactime);
 +
 +      /*
 +       * "antenna number"
 +       *
 +       * It seems that the antenna field in the phy flags value
 +       * is actually a bit field. This is undefined by radiotap,
 +       * it wants an actual antenna number but I always get "7"
 +       * for most legacy frames I receive indicating that the
 +       * same frame was received on all three RX chains.
 +       *
 +       * I think this field should be removed in favor of a
 +       * new 802.11n radiotap field "RX chains" that is defined
 +       * as a bitmask.
 +       */
 +      rx_status.antenna =
 +              (le16_to_cpu(phy_res->phy_flags) & RX_RES_PHY_FLAGS_ANTENNA_MSK)
 +              >> RX_RES_PHY_FLAGS_ANTENNA_POS;
 +
 +      /* set the preamble flag if appropriate */
 +      if (phy_res->phy_flags & RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK)
 +              rx_status.flag |= RX_FLAG_SHORTPRE;
 +
 +      /* Set up the HT phy flags */
 +      if (rate_n_flags & RATE_MCS_HT_MSK)
 +              rx_status.flag |= RX_FLAG_HT;
 +      if (rate_n_flags & RATE_MCS_HT40_MSK)
 +              rx_status.flag |= RX_FLAG_40MHZ;
 +      if (rate_n_flags & RATE_MCS_SGI_MSK)
 +              rx_status.flag |= RX_FLAG_SHORT_GI;
 +
 +      iwlagn_pass_packet_to_mac80211(priv, header, len, ampdu_status,
 +                                  rxb, &rx_status);
 +}
 +
 +/* Cache phy data (Rx signal strength, etc) for HT frame (REPLY_RX_PHY_CMD).
 + * This will be used later in iwl_rx_reply_rx() for REPLY_RX_MPDU_CMD. */
 +void iwlagn_rx_reply_rx_phy(struct iwl_priv *priv,
 +                          struct iwl_rx_mem_buffer *rxb)
 +{
 +      struct iwl_rx_packet *pkt = rxb_addr(rxb);
 +      priv->_agn.last_phy_res_valid = true;
 +      memcpy(&priv->_agn.last_phy_res, pkt->u.raw,
 +             sizeof(struct iwl_rx_phy_res));
 +}
 +
 +static int iwl_get_single_channel_for_scan(struct iwl_priv *priv,
 +                                   enum ieee80211_band band,
 +                                   struct iwl_scan_channel *scan_ch)
 +{
 +      const struct ieee80211_supported_band *sband;
 +      const struct iwl_channel_info *ch_info;
 +      u16 passive_dwell = 0;
 +      u16 active_dwell = 0;
 +      int i, added = 0;
 +      u16 channel = 0;
 +
 +      sband = iwl_get_hw_mode(priv, band);
 +      if (!sband) {
 +              IWL_ERR(priv, "invalid band\n");
 +              return added;
 +      }
 +
 +      active_dwell = iwl_get_active_dwell_time(priv, band, 0);
 +      passive_dwell = iwl_get_passive_dwell_time(priv, band);
 +
 +      if (passive_dwell <= active_dwell)
 +              passive_dwell = active_dwell + 1;
 +
 +      /* only scan single channel, good enough to reset the RF */
 +      /* pick the first valid not in-use channel */
 +      if (band == IEEE80211_BAND_5GHZ) {
 +              for (i = 14; i < priv->channel_count; i++) {
 +                      if (priv->channel_info[i].channel !=
 +                          le16_to_cpu(priv->staging_rxon.channel)) {
 +                              channel = priv->channel_info[i].channel;
 +                              ch_info = iwl_get_channel_info(priv,
 +                                      band, channel);
 +                              if (is_channel_valid(ch_info))
 +                                      break;
 +                      }
 +              }
 +      } else {
 +              for (i = 0; i < 14; i++) {
 +                      if (priv->channel_info[i].channel !=
 +                          le16_to_cpu(priv->staging_rxon.channel)) {
 +                                      channel =
 +                                              priv->channel_info[i].channel;
 +                                      ch_info = iwl_get_channel_info(priv,
 +                                              band, channel);
 +                                      if (is_channel_valid(ch_info))
 +                                              break;
 +                      }
 +              }
 +      }
 +      if (channel) {
 +              scan_ch->channel = cpu_to_le16(channel);
 +              scan_ch->type = SCAN_CHANNEL_TYPE_PASSIVE;
 +              scan_ch->active_dwell = cpu_to_le16(active_dwell);
 +              scan_ch->passive_dwell = cpu_to_le16(passive_dwell);
 +              /* Set txpower levels to defaults */
 +              scan_ch->dsp_atten = 110;
 +              if (band == IEEE80211_BAND_5GHZ)
 +                      scan_ch->tx_gain = ((1 << 5) | (3 << 3)) | 3;
 +              else
 +                      scan_ch->tx_gain = ((1 << 5) | (5 << 3));
 +              added++;
 +      } else
 +              IWL_ERR(priv, "no valid channel found\n");
 +      return added;
 +}
 +
 +static int iwl_get_channels_for_scan(struct iwl_priv *priv,
 +                                   enum ieee80211_band band,
 +                                   u8 is_active, u8 n_probes,
 +                                   struct iwl_scan_channel *scan_ch)
 +{
 +      struct ieee80211_channel *chan;
 +      const struct ieee80211_supported_band *sband;
 +      const struct iwl_channel_info *ch_info;
 +      u16 passive_dwell = 0;
 +      u16 active_dwell = 0;
 +      int added, i;
 +      u16 channel;
 +
 +      sband = iwl_get_hw_mode(priv, band);
 +      if (!sband)
 +              return 0;
 +
 +      active_dwell = iwl_get_active_dwell_time(priv, band, n_probes);
 +      passive_dwell = iwl_get_passive_dwell_time(priv, band);
 +
 +      if (passive_dwell <= active_dwell)
 +              passive_dwell = active_dwell + 1;
 +
 +      for (i = 0, added = 0; i < priv->scan_request->n_channels; i++) {
 +              chan = priv->scan_request->channels[i];
 +
 +              if (chan->band != band)
 +                      continue;
 +
 +              channel = ieee80211_frequency_to_channel(chan->center_freq);
 +              scan_ch->channel = cpu_to_le16(channel);
 +
 +              ch_info = iwl_get_channel_info(priv, band, channel);
 +              if (!is_channel_valid(ch_info)) {
 +                      IWL_DEBUG_SCAN(priv, "Channel %d is INVALID for this band.\n",
 +                                      channel);
 +                      continue;
 +              }
 +
 +              if (!is_active || is_channel_passive(ch_info) ||
 +                  (chan->flags & IEEE80211_CHAN_PASSIVE_SCAN))
 +                      scan_ch->type = SCAN_CHANNEL_TYPE_PASSIVE;
 +              else
 +                      scan_ch->type = SCAN_CHANNEL_TYPE_ACTIVE;
 +
 +              if (n_probes)
 +                      scan_ch->type |= IWL_SCAN_PROBE_MASK(n_probes);
 +
 +              scan_ch->active_dwell = cpu_to_le16(active_dwell);
 +              scan_ch->passive_dwell = cpu_to_le16(passive_dwell);
 +
 +              /* Set txpower levels to defaults */
 +              scan_ch->dsp_atten = 110;
 +
 +              /* NOTE: if we were doing 6Mb OFDM for scans we'd use
 +               * power level:
 +               * scan_ch->tx_gain = ((1 << 5) | (2 << 3)) | 3;
 +               */
 +              if (band == IEEE80211_BAND_5GHZ)
 +                      scan_ch->tx_gain = ((1 << 5) | (3 << 3)) | 3;
 +              else
 +                      scan_ch->tx_gain = ((1 << 5) | (5 << 3));
 +
 +              IWL_DEBUG_SCAN(priv, "Scanning ch=%d prob=0x%X [%s %d]\n",
 +                             channel, le32_to_cpu(scan_ch->type),
 +                             (scan_ch->type & SCAN_CHANNEL_TYPE_ACTIVE) ?
 +                              "ACTIVE" : "PASSIVE",
 +                             (scan_ch->type & SCAN_CHANNEL_TYPE_ACTIVE) ?
 +                             active_dwell : passive_dwell);
 +
 +              scan_ch++;
 +              added++;
 +      }
 +
 +      IWL_DEBUG_SCAN(priv, "total channels to scan %d\n", added);
 +      return added;
 +}
 +
 +void iwlagn_request_scan(struct iwl_priv *priv)
 +{
 +      struct iwl_host_cmd cmd = {
 +              .id = REPLY_SCAN_CMD,
 +              .len = sizeof(struct iwl_scan_cmd),
 +              .flags = CMD_SIZE_HUGE,
 +      };
 +      struct iwl_scan_cmd *scan;
 +      struct ieee80211_conf *conf = NULL;
 +      u32 rate_flags = 0;
 +      u16 cmd_len;
 +      u16 rx_chain = 0;
 +      enum ieee80211_band band;
 +      u8 n_probes = 0;
 +      u8 rx_ant = priv->hw_params.valid_rx_ant;
 +      u8 rate;
 +      bool is_active = false;
 +      int  chan_mod;
 +      u8 active_chains;
 +
 +      conf = ieee80211_get_hw_conf(priv->hw);
 +
 +      cancel_delayed_work(&priv->scan_check);
 +
 +      if (!iwl_is_ready(priv)) {
 +              IWL_WARN(priv, "request scan called when driver not ready.\n");
 +              goto done;
 +      }
 +
 +      /* Make sure the scan wasn't canceled before this queued work
 +       * was given the chance to run... */
 +      if (!test_bit(STATUS_SCANNING, &priv->status))
 +              goto done;
 +
 +      /* This should never be called or scheduled if there is currently
 +       * a scan active in the hardware. */
 +      if (test_bit(STATUS_SCAN_HW, &priv->status)) {
 +              IWL_DEBUG_INFO(priv, "Multiple concurrent scan requests in parallel. "
 +                             "Ignoring second request.\n");
 +              goto done;
 +      }
 +
 +      if (test_bit(STATUS_EXIT_PENDING, &priv->status)) {
 +              IWL_DEBUG_SCAN(priv, "Aborting scan due to device shutdown\n");
 +              goto done;
 +      }
 +
 +      if (test_bit(STATUS_SCAN_ABORTING, &priv->status)) {
 +              IWL_DEBUG_HC(priv, "Scan request while abort pending.  Queuing.\n");
 +              goto done;
 +      }
 +
 +      if (iwl_is_rfkill(priv)) {
 +              IWL_DEBUG_HC(priv, "Aborting scan due to RF Kill activation\n");
 +              goto done;
 +      }
 +
 +      if (!test_bit(STATUS_READY, &priv->status)) {
 +              IWL_DEBUG_HC(priv, "Scan request while uninitialized.  Queuing.\n");
 +              goto done;
 +      }
 +
 +      if (!priv->scan_cmd) {
 +              priv->scan_cmd = kmalloc(sizeof(struct iwl_scan_cmd) +
 +                                       IWL_MAX_SCAN_SIZE, GFP_KERNEL);
 +              if (!priv->scan_cmd) {
 +                      IWL_DEBUG_SCAN(priv,
 +                                     "fail to allocate memory for scan\n");
 +                      goto done;
 +              }
 +      }
 +      scan = priv->scan_cmd;
 +      memset(scan, 0, sizeof(struct iwl_scan_cmd) + IWL_MAX_SCAN_SIZE);
 +
 +      scan->quiet_plcp_th = IWL_PLCP_QUIET_THRESH;
 +      scan->quiet_time = IWL_ACTIVE_QUIET_TIME;
 +
 +      if (iwl_is_associated(priv)) {
 +              u16 interval = 0;
 +              u32 extra;
 +              u32 suspend_time = 100;
 +              u32 scan_suspend_time = 100;
 +              unsigned long flags;
 +
 +              IWL_DEBUG_INFO(priv, "Scanning while associated...\n");
 +              spin_lock_irqsave(&priv->lock, flags);
 +              interval = priv->beacon_int;
 +              spin_unlock_irqrestore(&priv->lock, flags);
 +
 +              scan->suspend_time = 0;
 +              scan->max_out_time = cpu_to_le32(200 * 1024);
 +              if (!interval)
 +                      interval = suspend_time;
 +
 +              extra = (suspend_time / interval) << 22;
 +              scan_suspend_time = (extra |
 +                  ((suspend_time % interval) * 1024));
 +              scan->suspend_time = cpu_to_le32(scan_suspend_time);
 +              IWL_DEBUG_SCAN(priv, "suspend_time 0x%X beacon interval %d\n",
 +                             scan_suspend_time, interval);
 +      }
 +
 +      if (priv->is_internal_short_scan) {
 +              IWL_DEBUG_SCAN(priv, "Start internal passive scan.\n");
 +      } else if (priv->scan_request->n_ssids) {
 +              int i, p = 0;
 +              IWL_DEBUG_SCAN(priv, "Kicking off active scan\n");
 +              for (i = 0; i < priv->scan_request->n_ssids; i++) {
 +                      /* always does wildcard anyway */
 +                      if (!priv->scan_request->ssids[i].ssid_len)
 +                              continue;
 +                      scan->direct_scan[p].id = WLAN_EID_SSID;
 +                      scan->direct_scan[p].len =
 +                              priv->scan_request->ssids[i].ssid_len;
 +                      memcpy(scan->direct_scan[p].ssid,
 +                             priv->scan_request->ssids[i].ssid,
 +                             priv->scan_request->ssids[i].ssid_len);
 +                      n_probes++;
 +                      p++;
 +              }
 +              is_active = true;
 +      } else
 +              IWL_DEBUG_SCAN(priv, "Start passive scan.\n");
 +
 +      scan->tx_cmd.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK;
 +      scan->tx_cmd.sta_id = priv->hw_params.bcast_sta_id;
 +      scan->tx_cmd.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
 +
 +      switch (priv->scan_band) {
 +      case IEEE80211_BAND_2GHZ:
 +              scan->flags = RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK;
 +              chan_mod = le32_to_cpu(priv->active_rxon.flags & RXON_FLG_CHANNEL_MODE_MSK)
 +                                     >> RXON_FLG_CHANNEL_MODE_POS;
 +              if (chan_mod == CHANNEL_MODE_PURE_40) {
 +                      rate = IWL_RATE_6M_PLCP;
 +              } else {
 +                      rate = IWL_RATE_1M_PLCP;
 +                      rate_flags = RATE_MCS_CCK_MSK;
 +              }
-                * If active scaning is requested but a certain channel
-                * is marked passive, we can do active scanning if we
-                * detect transmissions.
++              scan->good_CRC_th = IWL_GOOD_CRC_TH_DISABLED;
 +              break;
 +      case IEEE80211_BAND_5GHZ:
 +              rate = IWL_RATE_6M_PLCP;
 +              /*
-               scan->good_CRC_th = is_active ? IWL_GOOD_CRC_TH : 0;
++               * If active scanning is requested but a certain channel is
++               * marked passive, we can do active scanning if we detect
++               * transmissions.
++               *
++               * There is an issue with some firmware versions that triggers
++               * a sysassert on a "good CRC threshold" of zero (== disabled),
++               * on a radar channel even though this means that we should NOT
++               * send probes.
++               *
++               * The "good CRC threshold" is the number of frames that we
++               * need to receive during our dwell time on a channel before
++               * sending out probes -- setting this to a huge value will
++               * mean we never reach it, but at the same time work around
++               * the aforementioned issue. Thus use IWL_GOOD_CRC_TH_NEVER
++               * here instead of IWL_GOOD_CRC_TH_DISABLED.
 +               */
++              scan->good_CRC_th = is_active ? IWL_GOOD_CRC_TH_DEFAULT :
++                                              IWL_GOOD_CRC_TH_NEVER;
 +              break;
 +      default:
 +              IWL_WARN(priv, "Invalid scan band count\n");
 +              goto done;
 +      }
 +
 +      band = priv->scan_band;
 +
 +      if (priv->cfg->scan_antennas[band])
 +              rx_ant = priv->cfg->scan_antennas[band];
 +
 +      priv->scan_tx_ant[band] =
 +                      iwl_toggle_tx_ant(priv, priv->scan_tx_ant[band]);
 +      rate_flags |= iwl_ant_idx_to_flags(priv->scan_tx_ant[band]);
 +      scan->tx_cmd.rate_n_flags = iwl_hw_set_rate_n_flags(rate, rate_flags);
 +
 +      /* In power save mode use one chain, otherwise use all chains */
 +      if (test_bit(STATUS_POWER_PMI, &priv->status)) {
 +              /* rx_ant has been set to all valid chains previously */
 +              active_chains = rx_ant &
 +                              ((u8)(priv->chain_noise_data.active_chains));
 +              if (!active_chains)
 +                      active_chains = rx_ant;
 +
 +              IWL_DEBUG_SCAN(priv, "chain_noise_data.active_chains: %u\n",
 +                              priv->chain_noise_data.active_chains);
 +
 +              rx_ant = first_antenna(active_chains);
 +      }
 +      /* MIMO is not used here, but value is required */
 +      rx_chain |= priv->hw_params.valid_rx_ant << RXON_RX_CHAIN_VALID_POS;
 +      rx_chain |= rx_ant << RXON_RX_CHAIN_FORCE_MIMO_SEL_POS;
 +      rx_chain |= rx_ant << RXON_RX_CHAIN_FORCE_SEL_POS;
 +      rx_chain |= 0x1 << RXON_RX_CHAIN_DRIVER_FORCE_POS;
 +      scan->rx_chain = cpu_to_le16(rx_chain);
 +      if (!priv->is_internal_short_scan) {
 +              cmd_len = iwl_fill_probe_req(priv,
 +                                      (struct ieee80211_mgmt *)scan->data,
 +                                      priv->scan_request->ie,
 +                                      priv->scan_request->ie_len,
 +                                      IWL_MAX_SCAN_SIZE - sizeof(*scan));
 +      } else {
 +              cmd_len = iwl_fill_probe_req(priv,
 +                                      (struct ieee80211_mgmt *)scan->data,
 +                                      NULL, 0,
 +                                      IWL_MAX_SCAN_SIZE - sizeof(*scan));
 +
 +      }
 +      scan->tx_cmd.len = cpu_to_le16(cmd_len);
 +
 +      scan->filter_flags |= (RXON_FILTER_ACCEPT_GRP_MSK |
 +                             RXON_FILTER_BCON_AWARE_MSK);
 +
 +      if (priv->is_internal_short_scan) {
 +              scan->channel_count =
 +                      iwl_get_single_channel_for_scan(priv, band,
 +                              (void *)&scan->data[le16_to_cpu(
 +                              scan->tx_cmd.len)]);
 +      } else {
 +              scan->channel_count =
 +                      iwl_get_channels_for_scan(priv, band,
 +                              is_active, n_probes,
 +                              (void *)&scan->data[le16_to_cpu(
 +                              scan->tx_cmd.len)]);
 +      }
 +      if (scan->channel_count == 0) {
 +              IWL_DEBUG_SCAN(priv, "channel count %d\n", scan->channel_count);
 +              goto done;
 +      }
 +
 +      cmd.len += le16_to_cpu(scan->tx_cmd.len) +
 +          scan->channel_count * sizeof(struct iwl_scan_channel);
 +      cmd.data = scan;
 +      scan->len = cpu_to_le16(cmd.len);
 +
 +      set_bit(STATUS_SCAN_HW, &priv->status);
 +      if (iwl_send_cmd_sync(priv, &cmd))
 +              goto done;
 +
 +      queue_delayed_work(priv->workqueue, &priv->scan_check,
 +                         IWL_SCAN_CHECK_WATCHDOG);
 +
 +      return;
 +
 + done:
 +      /* Cannot perform scan. Make sure we clear scanning
 +      * bits from status so next scan request can be performed.
 +      * If we don't clear scanning status bit here all next scan
 +      * will fail
 +      */
 +      clear_bit(STATUS_SCAN_HW, &priv->status);
 +      clear_bit(STATUS_SCANNING, &priv->status);
 +      /* inform mac80211 scan aborted */
 +      queue_work(priv->workqueue, &priv->scan_completed);
 +}
index e7263ed693c4b3df6a8aa15fe6082c3c9f41a0ad,2f47d9332bfc8fcb43ef30c21d9c7c6167022845..789480b89a6e3e7c62569b114b9356b16c58f50b
@@@ -2938,11 -2966,11 +2938,12 @@@ void iwl3945_request_scan(struct iwl_pr
                 * is marked passive, we can do active scanning if we
                 * detect transmissions.
                 */
-               scan->good_CRC_th = is_active ? IWL_GOOD_CRC_TH : 0;
+               scan->good_CRC_th = is_active ? IWL_GOOD_CRC_TH_DEFAULT :
+                                               IWL_GOOD_CRC_TH_DISABLED;
                band = IEEE80211_BAND_5GHZ;
 -      } else {
 -              IWL_WARN(priv, "Invalid scan band count\n");
 +              break;
 +      default:
 +              IWL_WARN(priv, "Invalid scan band\n");
                goto done;
        }
  
Simple merge
index 7dfe833d9716fd4683e0bf67c0bf1c8692aa6283,944a8a92207ba93298848e2f74c41496eb19c079..2b6a0c47ed532d42ae7ab27ad406a938dc9bf515
@@@ -183,10 -183,9 +183,9 @@@ static void sta_addba_resp_timer_expire
                       HT_AGG_STATE_REQ_STOP_BA_MSK)) !=
                                                HT_ADDBA_REQUESTED_MSK) {
                spin_unlock_bh(&sta->lock);
-               *state = HT_AGG_STATE_IDLE;
  #ifdef CONFIG_MAC80211_HT_DEBUG
                printk(KERN_DEBUG "timer expired on tid %d but we are not "
 -                              "(or no longer) expecting addBA response there",
 +                              "(or no longer) expecting addBA response there\n",
                        tid);
  #endif
                return;
Simple merge