amd64_edac: Remove dead code

5e2af0c09e60 ("edac: Don't initialize csrow's first_page & friends when
not needed") removed useless initialization of variables but left in the
functions which did that. They're unused now so drop them.

Signed-off-by: Borislav Petkov <bp@alien8.de>

diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c
index ad8bf2aa629d3b23510053f6c88b23c0c2d9d504..c58f214aab299bc40e544fe7344f082a87c8e38c 100644 (file)
--- a/drivers/edac/amd64_edac.c
+++ b/drivers/edac/amd64_edac.c
@@ -602,111 +602,6 @@ static u64 sys_addr_to_input_addr(struct mem_ctl_info *mci, u64 sys_addr)
        return input_addr;
 }
 
-
-/*
- * @input_addr is an InputAddr associated with the node represented by mci.
- * Translate @input_addr to a DramAddr and return the result.
- */
-static u64 input_addr_to_dram_addr(struct mem_ctl_info *mci, u64 input_addr)
-{
-       struct amd64_pvt *pvt;
-       unsigned node_id, intlv_shift;
-       u64 bits, dram_addr;
-       u32 intlv_sel;
-
-       /*
-        * Near the start of section 3.4.4 (p. 70, BKDG #26094, K8, revA-E)
-        * shows how to translate a DramAddr to an InputAddr. Here we reverse
-        * this procedure. When translating from a DramAddr to an InputAddr, the
-        * bits used for node interleaving are discarded.  Here we recover these
-        * bits from the IntlvSel field of the DRAM Limit register (section
-        * 3.4.4.2) for the node that input_addr is associated with.
-        */
-       pvt = mci->pvt_info;
-       node_id = pvt->mc_node_id;
-
-       BUG_ON(node_id > 7);
-
-       intlv_shift = num_node_interleave_bits(dram_intlv_en(pvt, 0));
-       if (intlv_shift == 0) {
-               edac_dbg(1, "    InputAddr 0x%lx translates to DramAddr of same value\n",
-                        (unsigned long)input_addr);
-
-               return input_addr;
-       }
-
-       bits = ((input_addr & GENMASK(12, 35)) << intlv_shift) +
-               (input_addr & 0xfff);
-
-       intlv_sel = dram_intlv_sel(pvt, node_id) & ((1 << intlv_shift) - 1);
-       dram_addr = bits + (intlv_sel << 12);
-
-       edac_dbg(1, "InputAddr 0x%lx translates to DramAddr 0x%lx (%d node interleave bits)\n",
-                (unsigned long)input_addr,
-                (unsigned long)dram_addr, intlv_shift);
-
-       return dram_addr;
-}
-
-/*
- * @dram_addr is a DramAddr that maps to the node represented by mci. Convert
- * @dram_addr to a SysAddr.
- */
-static u64 dram_addr_to_sys_addr(struct mem_ctl_info *mci, u64 dram_addr)
-{
-       struct amd64_pvt *pvt = mci->pvt_info;
-       u64 hole_base, hole_offset, hole_size, base, sys_addr;
-       int ret = 0;
-
-       ret = amd64_get_dram_hole_info(mci, &hole_base, &hole_offset,
-                                     &hole_size);
-       if (!ret) {
-               if ((dram_addr >= hole_base) &&
-                   (dram_addr < (hole_base + hole_size))) {
-                       sys_addr = dram_addr + hole_offset;
-
-                       edac_dbg(1, "using DHAR to translate DramAddr 0x%lx to SysAddr 0x%lx\n",
-                                (unsigned long)dram_addr,
-                                (unsigned long)sys_addr);
-
-                       return sys_addr;
-               }
-       }
-
-       base     = get_dram_base(pvt, pvt->mc_node_id);
-       sys_addr = dram_addr + base;
-
-       /*
-        * The sys_addr we have computed up to this point is a 40-bit value
-        * because the k8 deals with 40-bit values.  However, the value we are
-        * supposed to return is a full 64-bit physical address.  The AMD
-        * x86-64 architecture specifies that the most significant implemented
-        * address bit through bit 63 of a physical address must be either all
-        * 0s or all 1s.  Therefore we sign-extend the 40-bit sys_addr to a
-        * 64-bit value below.  See section 3.4.2 of AMD publication 24592:
-        * AMD x86-64 Architecture Programmer's Manual Volume 1 Application
-        * Programming.
-        */
-       sys_addr |= ~((sys_addr & (1ull << 39)) - 1);
-
-       edac_dbg(1, "    Node %d, DramAddr 0x%lx to SysAddr 0x%lx\n",
-                pvt->mc_node_id, (unsigned long)dram_addr,
-                (unsigned long)sys_addr);
-
-       return sys_addr;
-}
-
-/*
- * @input_addr is an InputAddr associated with the node given by mci. Translate
- * @input_addr to a SysAddr.
- */
-static inline u64 input_addr_to_sys_addr(struct mem_ctl_info *mci,
-                                        u64 input_addr)
-{
-       return dram_addr_to_sys_addr(mci,
-                                    input_addr_to_dram_addr(mci, input_addr));
-}
-
 /* Map the Error address to a PAGE and PAGE OFFSET. */
 static inline void error_address_to_page_and_offset(u64 error_address,
                                                    struct err_info *err)