3c509: convert to isa_driver and pnp_driver
authorOndrej Zary <linux@rainbow-software.org>
Fri, 28 Mar 2008 21:41:23 +0000 (14:41 -0700)
committerJeff Garzik <jeff@garzik.org>
Sat, 29 Mar 2008 02:14:07 +0000 (22:14 -0400)
Convert 3c509 driver to isa_driver and pnp_driver.  The result is that
autoloading using udev and hibernation works with ISA PnP cards.  It also adds
hibernation support for non-PnP ISA cards.

xcvr module parameter was removed as its value was not used.

Tested using 3 ISA cards in various combinations of PnP and non-PnP modes.
EISA and MCA only compile-tested.

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
drivers/net/3c509.c

index 8fafac987e0bea25df8b53d562a4b8dbc19c763a..54dac0696d9117de35338e5dc5bbb61048d970f9 100644 (file)
                v1.19a 28Oct2002 Davud Ruggiero <jdr@farfalle.com>
                        - Increase *read_eeprom udelay to workaround oops with 2 cards.
                v1.19b 08Nov2002 Marc Zyngier <maz@wild-wind.fr.eu.org>
-                   - Introduce driver model for EISA cards.
+                       - Introduce driver model for EISA cards.
+               v1.20  04Feb2008 Ondrej Zary <linux@rainbow-software.org>
+                       - convert to isa_driver and pnp_driver and some cleanups
 */
 
 #define DRV_NAME       "3c509"
-#define DRV_VERSION    "1.19b"
-#define DRV_RELDATE    "08Nov2002"
+#define DRV_VERSION    "1.20"
+#define DRV_RELDATE    "04Feb2008"
 
 /* A few values that may be tweaked. */
 
 /* Time in jiffies before concluding the transmitter is hung. */
 #define TX_TIMEOUT  (400*HZ/1000)
-/* Maximum events (Rx packets, etc.) to handle at each interrupt. */
-static int max_interrupt_work = 10;
 
 #include <linux/module.h>
-#ifdef CONFIG_MCA
 #include <linux/mca.h>
-#endif
-#include <linux/isapnp.h>
+#include <linux/isa.h>
+#include <linux/pnp.h>
 #include <linux/string.h>
 #include <linux/interrupt.h>
 #include <linux/errno.h>
@@ -97,10 +96,6 @@ static int max_interrupt_work = 10;
 
 static char version[] __initdata = DRV_NAME ".c:" DRV_VERSION " " DRV_RELDATE " becker@scyld.com\n";
 
-#if defined(CONFIG_PM) && (defined(CONFIG_MCA) || defined(CONFIG_EISA))
-#define EL3_SUSPEND
-#endif
-
 #ifdef EL3_DEBUG
 static int el3_debug = EL3_DEBUG;
 #else
@@ -111,6 +106,7 @@ static int el3_debug = 2;
  * a global variable so that the mca/eisa probe routines can increment
  * it */
 static int el3_cards = 0;
+#define EL3_MAX_CARDS 8
 
 /* To minimize the size of the driver source I only define operating
    constants if they are used several times.  You'll need the manual
@@ -119,7 +115,7 @@ static int el3_cards = 0;
 #define EL3_DATA 0x00
 #define EL3_CMD 0x0e
 #define EL3_STATUS 0x0e
-#define         EEPROM_READ 0x80
+#define        EEPROM_READ 0x80
 
 #define EL3_IO_EXTENT  16
 
@@ -168,23 +164,31 @@ enum RxFilter {
  */
 #define SKB_QUEUE_SIZE 64
 
+enum el3_cardtype { EL3_ISA, EL3_PNP, EL3_MCA, EL3_EISA };
+
 struct el3_private {
        struct net_device_stats stats;
-       struct net_device *next_dev;
        spinlock_t lock;
        /* skb send-queue */
        int head, size;
        struct sk_buff *queue[SKB_QUEUE_SIZE];
-       enum {
-               EL3_MCA,
-               EL3_PNP,
-               EL3_EISA,
-       } type;                                         /* type of device */
-       struct device *dev;
+       enum el3_cardtype type;
 };
-static int id_port __initdata = 0x110; /* Start with 0x110 to avoid new sound cards.*/
-static struct net_device *el3_root_dev;
+static int id_port;
+static int current_tag;
+static struct net_device *el3_devs[EL3_MAX_CARDS];
+
+/* Parameters that may be passed into the module. */
+static int debug = -1;
+static int irq[] = {-1, -1, -1, -1, -1, -1, -1, -1};
+/* Maximum events (Rx packets, etc.) to handle at each interrupt. */
+static int max_interrupt_work = 10;
+#ifdef CONFIG_PNP
+static int nopnp;
+#endif
 
+static int __init el3_common_init(struct net_device *dev);
+static void el3_common_remove(struct net_device *dev);
 static ushort id_read_eeprom(int index);
 static ushort read_eeprom(int ioaddr, int index);
 static int el3_open(struct net_device *dev);
@@ -199,7 +203,7 @@ static void el3_tx_timeout (struct net_device *dev);
 static void el3_down(struct net_device *dev);
 static void el3_up(struct net_device *dev);
 static const struct ethtool_ops ethtool_ops;
-#ifdef EL3_SUSPEND
+#ifdef CONFIG_PM
 static int el3_suspend(struct device *, pm_message_t);
 static int el3_resume(struct device *);
 #else
@@ -209,13 +213,272 @@ static int el3_resume(struct device *);
 
 
 /* generic device remove for all device types */
-#if defined(CONFIG_EISA) || defined(CONFIG_MCA)
 static int el3_device_remove (struct device *device);
-#endif
 #ifdef CONFIG_NET_POLL_CONTROLLER
 static void el3_poll_controller(struct net_device *dev);
 #endif
 
+/* Return 0 on success, 1 on error, 2 when found already detected PnP card */
+static int el3_isa_id_sequence(__be16 *phys_addr)
+{
+       short lrs_state = 0xff;
+       int i;
+
+       /* ISA boards are detected by sending the ID sequence to the
+          ID_PORT.  We find cards past the first by setting the 'current_tag'
+          on cards as they are found.  Cards with their tag set will not
+          respond to subsequent ID sequences. */
+
+       outb(0x00, id_port);
+       outb(0x00, id_port);
+       for (i = 0; i < 255; i++) {
+               outb(lrs_state, id_port);
+               lrs_state <<= 1;
+               lrs_state = lrs_state & 0x100 ? lrs_state ^ 0xcf : lrs_state;
+       }
+       /* For the first probe, clear all board's tag registers. */
+       if (current_tag == 0)
+               outb(0xd0, id_port);
+       else                    /* Otherwise kill off already-found boards. */
+               outb(0xd8, id_port);
+       if (id_read_eeprom(7) != 0x6d50)
+               return 1;
+       /* Read in EEPROM data, which does contention-select.
+          Only the lowest address board will stay "on-line".
+          3Com got the byte order backwards. */
+       for (i = 0; i < 3; i++)
+               phys_addr[i] = htons(id_read_eeprom(i));
+#ifdef CONFIG_PNP
+       if (!nopnp) {
+               /* The ISA PnP 3c509 cards respond to the ID sequence too.
+                  This check is needed in order not to register them twice. */
+               for (i = 0; i < el3_cards; i++) {
+                       struct el3_private *lp = netdev_priv(el3_devs[i]);
+                       if (lp->type == EL3_PNP
+                           && !memcmp(phys_addr, el3_devs[i]->dev_addr,
+                                      ETH_ALEN)) {
+                               if (el3_debug > 3)
+                                       printk(KERN_DEBUG "3c509 with address %02x %02x %02x %02x %02x %02x was found by ISAPnP\n",
+                                               phys_addr[0] & 0xff, phys_addr[0] >> 8,
+                                               phys_addr[1] & 0xff, phys_addr[1] >> 8,
+                                               phys_addr[2] & 0xff, phys_addr[2] >> 8);
+                               /* Set the adaptor tag so that the next card can be found. */
+                               outb(0xd0 + ++current_tag, id_port);
+                               return 2;
+                       }
+               }
+       }
+#endif /* CONFIG_PNP */
+       return 0;
+
+}
+
+static void __devinit el3_dev_fill(struct net_device *dev, __be16 *phys_addr,
+                                  int ioaddr, int irq, int if_port,
+                                  enum el3_cardtype type)
+{
+       struct el3_private *lp = netdev_priv(dev);
+
+       memcpy(dev->dev_addr, phys_addr, ETH_ALEN);
+       dev->base_addr = ioaddr;
+       dev->irq = irq;
+       dev->if_port = if_port;
+       lp->type = type;
+}
+
+static int __devinit el3_isa_match(struct device *pdev,
+                                  unsigned int ndev)
+{
+       struct net_device *dev;
+       int ioaddr, isa_irq, if_port, err;
+       unsigned int iobase;
+       __be16 phys_addr[3];
+
+       while ((err = el3_isa_id_sequence(phys_addr)) == 2)
+               ;       /* Skip to next card when PnP card found */
+       if (err == 1)
+               return 0;
+
+       iobase = id_read_eeprom(8);
+       if_port = iobase >> 14;
+       ioaddr = 0x200 + ((iobase & 0x1f) << 4);
+       if (irq[el3_cards] > 1 && irq[el3_cards] < 16)
+               isa_irq = irq[el3_cards];
+       else
+               isa_irq = id_read_eeprom(9) >> 12;
+
+       dev = alloc_etherdev(sizeof(struct el3_private));
+       if (!dev)
+               return -ENOMEM;
+
+       netdev_boot_setup_check(dev);
+
+       if (!request_region(ioaddr, EL3_IO_EXTENT, "3c509-isa")) {
+               free_netdev(dev);
+               return 0;
+       }
+
+       /* Set the adaptor tag so that the next card can be found. */
+       outb(0xd0 + ++current_tag, id_port);
+
+       /* Activate the adaptor at the EEPROM location. */
+       outb((ioaddr >> 4) | 0xe0, id_port);
+
+       EL3WINDOW(0);
+       if (inw(ioaddr) != 0x6d50) {
+               free_netdev(dev);
+               return 0;
+       }
+
+       /* Free the interrupt so that some other card can use it. */
+       outw(0x0f00, ioaddr + WN0_IRQ);
+
+       el3_dev_fill(dev, phys_addr, ioaddr, isa_irq, if_port, EL3_ISA);
+       dev_set_drvdata(pdev, dev);
+       if (el3_common_init(dev)) {
+               free_netdev(dev);
+               return 0;
+       }
+
+       el3_devs[el3_cards++] = dev;
+       return 1;
+}
+
+static int __devexit el3_isa_remove(struct device *pdev,
+                                   unsigned int ndev)
+{
+       el3_device_remove(pdev);
+       dev_set_drvdata(pdev, NULL);
+       return 0;
+}
+
+#ifdef CONFIG_PM
+static int el3_isa_suspend(struct device *dev, unsigned int n,
+                          pm_message_t state)
+{
+       current_tag = 0;
+       return el3_suspend(dev, state);
+}
+
+static int el3_isa_resume(struct device *dev, unsigned int n)
+{
+       struct net_device *ndev = dev_get_drvdata(dev);
+       int ioaddr = ndev->base_addr, err;
+       __be16 phys_addr[3];
+
+       while ((err = el3_isa_id_sequence(phys_addr)) == 2)
+               ;       /* Skip to next card when PnP card found */
+       if (err == 1)
+               return 0;
+       /* Set the adaptor tag so that the next card can be found. */
+       outb(0xd0 + ++current_tag, id_port);
+       /* Enable the card */
+       outb((ioaddr >> 4) | 0xe0, id_port);
+       EL3WINDOW(0);
+       if (inw(ioaddr) != 0x6d50)
+               return 1;
+       /* Free the interrupt so that some other card can use it. */
+       outw(0x0f00, ioaddr + WN0_IRQ);
+       return el3_resume(dev);
+}
+#endif
+
+static struct isa_driver el3_isa_driver = {
+       .match          = el3_isa_match,
+       .remove         = __devexit_p(el3_isa_remove),
+#ifdef CONFIG_PM
+       .suspend        = el3_isa_suspend,
+       .resume         = el3_isa_resume,
+#endif
+       .driver         = {
+               .name   = "3c509"
+       },
+};
+static int isa_registered;
+
+#ifdef CONFIG_PNP
+static struct pnp_device_id el3_pnp_ids[] = {
+       { .id = "TCM5090" }, /* 3Com Etherlink III (TP) */
+       { .id = "TCM5091" }, /* 3Com Etherlink III */
+       { .id = "TCM5094" }, /* 3Com Etherlink III (combo) */
+       { .id = "TCM5095" }, /* 3Com Etherlink III (TPO) */
+       { .id = "TCM5098" }, /* 3Com Etherlink III (TPC) */
+       { .id = "PNP80f7" }, /* 3Com Etherlink III compatible */
+       { .id = "PNP80f8" }, /* 3Com Etherlink III compatible */
+       { .id = "" }
+};
+MODULE_DEVICE_TABLE(pnp, el3_pnp_ids);
+
+static int __devinit el3_pnp_probe(struct pnp_dev *pdev,
+                                   const struct pnp_device_id *id)
+{
+       short i;
+       int ioaddr, irq, if_port;
+       u16 phys_addr[3];
+       struct net_device *dev = NULL;
+       int err;
+
+       ioaddr = pnp_port_start(pdev, 0);
+       if (!request_region(ioaddr, EL3_IO_EXTENT, "3c509-pnp"))
+               return -EBUSY;
+       irq = pnp_irq(pdev, 0);
+       EL3WINDOW(0);
+       for (i = 0; i < 3; i++)
+               phys_addr[i] = htons(read_eeprom(ioaddr, i));
+       if_port = read_eeprom(ioaddr, 8) >> 14;
+       dev = alloc_etherdev(sizeof(struct el3_private));
+       if (!dev) {
+               release_region(ioaddr, EL3_IO_EXTENT);
+               return -ENOMEM;
+       }
+       SET_NETDEV_DEV(dev, &pdev->dev);
+       netdev_boot_setup_check(dev);
+
+       el3_dev_fill(dev, phys_addr, ioaddr, irq, if_port, EL3_PNP);
+       pnp_set_drvdata(pdev, dev);
+       err = el3_common_init(dev);
+
+       if (err) {
+               pnp_set_drvdata(pdev, NULL);
+               free_netdev(dev);
+               return err;
+       }
+
+       el3_devs[el3_cards++] = dev;
+       return 0;
+}
+
+static void __devexit el3_pnp_remove(struct pnp_dev *pdev)
+{
+       el3_common_remove(pnp_get_drvdata(pdev));
+       pnp_set_drvdata(pdev, NULL);
+}
+
+#ifdef CONFIG_PM
+static int el3_pnp_suspend(struct pnp_dev *pdev, pm_message_t state)
+{
+       return el3_suspend(&pdev->dev, state);
+}
+
+static int el3_pnp_resume(struct pnp_dev *pdev)
+{
+       return el3_resume(&pdev->dev);
+}
+#endif
+
+static struct pnp_driver el3_pnp_driver = {
+       .name           = "3c509",
+       .id_table       = el3_pnp_ids,
+       .probe          = el3_pnp_probe,
+       .remove         = __devexit_p(el3_pnp_remove),
+#ifdef CONFIG_PM
+       .suspend        = el3_pnp_suspend,
+       .resume         = el3_pnp_resume,
+#endif
+};
+static int pnp_registered;
+#endif /* CONFIG_PNP */
+
 #ifdef CONFIG_EISA
 static struct eisa_device_id el3_eisa_ids[] = {
                { "TCM5092" },
@@ -230,13 +493,14 @@ static int el3_eisa_probe (struct device *device);
 static struct eisa_driver el3_eisa_driver = {
                .id_table = el3_eisa_ids,
                .driver   = {
-                               .name    = "3c509",
+                               .name    = "3c579",
                                .probe   = el3_eisa_probe,
                                .remove  = __devexit_p (el3_device_remove),
                                .suspend = el3_suspend,
                                .resume  = el3_resume,
                }
 };
+static int eisa_registered;
 #endif
 
 #ifdef CONFIG_MCA
@@ -271,45 +535,9 @@ static struct mca_driver el3_mca_driver = {
                                .resume  = el3_resume,
                },
 };
+static int mca_registered;
 #endif /* CONFIG_MCA */
 
-#if defined(__ISAPNP__)
-static struct isapnp_device_id el3_isapnp_adapters[] __initdata = {
-       {       ISAPNP_ANY_ID, ISAPNP_ANY_ID,
-               ISAPNP_VENDOR('T', 'C', 'M'), ISAPNP_FUNCTION(0x5090),
-               (long) "3Com Etherlink III (TP)" },
-       {       ISAPNP_ANY_ID, ISAPNP_ANY_ID,
-               ISAPNP_VENDOR('T', 'C', 'M'), ISAPNP_FUNCTION(0x5091),
-               (long) "3Com Etherlink III" },
-       {       ISAPNP_ANY_ID, ISAPNP_ANY_ID,
-               ISAPNP_VENDOR('T', 'C', 'M'), ISAPNP_FUNCTION(0x5094),
-               (long) "3Com Etherlink III (combo)" },
-       {       ISAPNP_ANY_ID, ISAPNP_ANY_ID,
-               ISAPNP_VENDOR('T', 'C', 'M'), ISAPNP_FUNCTION(0x5095),
-               (long) "3Com Etherlink III (TPO)" },
-       {       ISAPNP_ANY_ID, ISAPNP_ANY_ID,
-               ISAPNP_VENDOR('T', 'C', 'M'), ISAPNP_FUNCTION(0x5098),
-               (long) "3Com Etherlink III (TPC)" },
-       {       ISAPNP_ANY_ID, ISAPNP_ANY_ID,
-               ISAPNP_VENDOR('P', 'N', 'P'), ISAPNP_FUNCTION(0x80f7),
-               (long) "3Com Etherlink III compatible" },
-       {       ISAPNP_ANY_ID, ISAPNP_ANY_ID,
-               ISAPNP_VENDOR('P', 'N', 'P'), ISAPNP_FUNCTION(0x80f8),
-               (long) "3Com Etherlink III compatible" },
-       { }     /* terminate list */
-};
-
-static __be16 el3_isapnp_phys_addr[8][3];
-static int nopnp;
-#endif /* __ISAPNP__ */
-
-/* With the driver model introduction for EISA devices, both init
- * and cleanup have been split :
- * - EISA devices probe/remove starts in el3_eisa_probe/el3_device_remove
- * - MCA/ISA still use el3_probe
- *
- * Both call el3_common_init/el3_common_remove. */
-
 static int __init el3_common_init(struct net_device *dev)
 {
        struct el3_private *lp = netdev_priv(dev);
@@ -360,231 +588,11 @@ static int __init el3_common_init(struct net_device *dev)
 
 static void el3_common_remove (struct net_device *dev)
 {
-       struct el3_private *lp = netdev_priv(dev);
-
-       (void) lp;                              /* Keep gcc quiet... */
-#if defined(__ISAPNP__)
-       if (lp->type == EL3_PNP)
-               pnp_device_detach(to_pnp_dev(lp->dev));
-#endif
-
        unregister_netdev (dev);
        release_region(dev->base_addr, EL3_IO_EXTENT);
        free_netdev (dev);
 }
 
-static int __init el3_probe(int card_idx)
-{
-       struct net_device *dev;
-       struct el3_private *lp;
-       short lrs_state = 0xff, i;
-       int ioaddr, irq, if_port;
-       __be16 phys_addr[3];
-       static int current_tag;
-       int err = -ENODEV;
-#if defined(__ISAPNP__)
-       static int pnp_cards;
-       struct pnp_dev *idev = NULL;
-       int pnp_found = 0;
-
-       if (nopnp == 1)
-               goto no_pnp;
-
-       for (i=0; el3_isapnp_adapters[i].vendor != 0; i++) {
-               int j;
-               while ((idev = pnp_find_dev(NULL,
-                                           el3_isapnp_adapters[i].vendor,
-                                           el3_isapnp_adapters[i].function,
-                                           idev))) {
-                       if (pnp_device_attach(idev) < 0)
-                               continue;
-                       if (pnp_activate_dev(idev) < 0) {
-__again:
-                               pnp_device_detach(idev);
-                               continue;
-                       }
-                       if (!pnp_port_valid(idev, 0) || !pnp_irq_valid(idev, 0))
-                               goto __again;
-                       ioaddr = pnp_port_start(idev, 0);
-                       if (!request_region(ioaddr, EL3_IO_EXTENT, "3c509 PnP")) {
-                               pnp_device_detach(idev);
-                               return -EBUSY;
-                       }
-                       irq = pnp_irq(idev, 0);
-                       if (el3_debug > 3)
-                               printk ("ISAPnP reports %s at i/o 0x%x, irq %d\n",
-                                       (char*) el3_isapnp_adapters[i].driver_data, ioaddr, irq);
-                       EL3WINDOW(0);
-                       for (j = 0; j < 3; j++)
-                               el3_isapnp_phys_addr[pnp_cards][j] =
-                                       phys_addr[j] =
-                                               htons(read_eeprom(ioaddr, j));
-                       if_port = read_eeprom(ioaddr, 8) >> 14;
-                       dev = alloc_etherdev(sizeof (struct el3_private));
-                       if (!dev) {
-                                       release_region(ioaddr, EL3_IO_EXTENT);
-                                       pnp_device_detach(idev);
-                                       return -ENOMEM;
-                       }
-
-                       SET_NETDEV_DEV(dev, &idev->dev);
-                       pnp_cards++;
-
-                       netdev_boot_setup_check(dev);
-                       pnp_found = 1;
-                       goto found;
-               }
-       }
-no_pnp:
-#endif /* __ISAPNP__ */
-
-       /* Select an open I/O location at 0x1*0 to do contention select. */
-       for ( ; id_port < 0x200; id_port += 0x10) {
-               if (!request_region(id_port, 1, "3c509"))
-                       continue;
-               outb(0x00, id_port);
-               outb(0xff, id_port);
-               if (inb(id_port) & 0x01){
-                       release_region(id_port, 1);
-                       break;
-               } else
-                       release_region(id_port, 1);
-       }
-       if (id_port >= 0x200) {
-               /* Rare -- do we really need a warning? */
-               printk(" WARNING: No I/O port available for 3c509 activation.\n");
-               return -ENODEV;
-       }
-
-       /* Next check for all ISA bus boards by sending the ID sequence to the
-          ID_PORT.  We find cards past the first by setting the 'current_tag'
-          on cards as they are found.  Cards with their tag set will not
-          respond to subsequent ID sequences. */
-
-       outb(0x00, id_port);
-       outb(0x00, id_port);
-       for(i = 0; i < 255; i++) {
-               outb(lrs_state, id_port);
-               lrs_state <<= 1;
-               lrs_state = lrs_state & 0x100 ? lrs_state ^ 0xcf : lrs_state;
-       }
-
-       /* For the first probe, clear all board's tag registers. */
-       if (current_tag == 0)
-               outb(0xd0, id_port);
-       else                            /* Otherwise kill off already-found boards. */
-               outb(0xd8, id_port);
-
-       if (id_read_eeprom(7) != 0x6d50) {
-               return -ENODEV;
-       }
-
-       /* Read in EEPROM data, which does contention-select.
-          Only the lowest address board will stay "on-line".
-          3Com got the byte order backwards. */
-       for (i = 0; i < 3; i++) {
-               phys_addr[i] = htons(id_read_eeprom(i));
-       }
-
-#if defined(__ISAPNP__)
-       if (nopnp == 0) {
-               /* The ISA PnP 3c509 cards respond to the ID sequence.
-                  This check is needed in order not to register them twice. */
-               for (i = 0; i < pnp_cards; i++) {
-                       if (phys_addr[0] == el3_isapnp_phys_addr[i][0] &&
-                           phys_addr[1] == el3_isapnp_phys_addr[i][1] &&
-                           phys_addr[2] == el3_isapnp_phys_addr[i][2])
-                       {
-                               if (el3_debug > 3)
-                                       printk("3c509 with address %02x %02x %02x %02x %02x %02x was found by ISAPnP\n",
-                                               phys_addr[0] & 0xff, phys_addr[0] >> 8,
-                                               phys_addr[1] & 0xff, phys_addr[1] >> 8,
-                                               phys_addr[2] & 0xff, phys_addr[2] >> 8);
-                               /* Set the adaptor tag so that the next card can be found. */
-                               outb(0xd0 + ++current_tag, id_port);
-                               goto no_pnp;
-                       }
-               }
-       }
-#endif /* __ISAPNP__ */
-
-       {
-               unsigned int iobase = id_read_eeprom(8);
-               if_port = iobase >> 14;
-               ioaddr = 0x200 + ((iobase & 0x1f) << 4);
-       }
-       irq = id_read_eeprom(9) >> 12;
-
-       dev = alloc_etherdev(sizeof (struct el3_private));
-       if (!dev)
-               return -ENOMEM;
-
-       netdev_boot_setup_check(dev);
-
-       /* Set passed-in IRQ or I/O Addr. */
-       if (dev->irq > 1  &&  dev->irq < 16)
-                       irq = dev->irq;
-
-       if (dev->base_addr) {
-               if (dev->mem_end == 0x3c509     /* Magic key */
-                   && dev->base_addr >= 0x200  &&  dev->base_addr <= 0x3e0)
-                       ioaddr = dev->base_addr & 0x3f0;
-               else if (dev->base_addr != ioaddr)
-                       goto out;
-       }
-
-       if (!request_region(ioaddr, EL3_IO_EXTENT, "3c509")) {
-               err = -EBUSY;
-               goto out;
-       }
-
-       /* Set the adaptor tag so that the next card can be found. */
-       outb(0xd0 + ++current_tag, id_port);
-
-       /* Activate the adaptor at the EEPROM location. */
-       outb((ioaddr >> 4) | 0xe0, id_port);
-
-       EL3WINDOW(0);
-       if (inw(ioaddr) != 0x6d50)
-               goto out1;
-
-       /* Free the interrupt so that some other card can use it. */
-       outw(0x0f00, ioaddr + WN0_IRQ);
-
-#if defined(__ISAPNP__)
- found:                                                        /* PNP jumps here... */
-#endif /* __ISAPNP__ */
-
-       memcpy(dev->dev_addr, phys_addr, sizeof(phys_addr));
-       dev->base_addr = ioaddr;
-       dev->irq = irq;
-       dev->if_port = if_port;
-       lp = netdev_priv(dev);
-#if defined(__ISAPNP__)
-       lp->dev = &idev->dev;
-       if (pnp_found)
-               lp->type = EL3_PNP;
-#endif
-       err = el3_common_init(dev);
-
-       if (err)
-               goto out1;
-
-       el3_cards++;
-       lp->next_dev = el3_root_dev;
-       el3_root_dev = dev;
-       return 0;
-
-out1:
-#if defined(__ISAPNP__)
-       if (idev)
-               pnp_device_detach(idev);
-#endif
-out:
-       free_netdev(dev);
-       return err;
-}
-
 #ifdef CONFIG_MCA
 static int __init el3_mca_probe(struct device *device)
 {
@@ -596,7 +604,6 @@ static int __init el3_mca_probe(struct device *device)
         * redone for multi-card detection by ZP Gu (zpg@castle.net)
         * now works as a module */
 
-       struct el3_private *lp;
        short i;
        int ioaddr, irq, if_port;
        u16 phys_addr[3];
@@ -613,7 +620,7 @@ static int __init el3_mca_probe(struct device *device)
        irq = pos5 & 0x0f;
 
 
-       printk("3c529: found %s at slot %d\n",
+       printk(KERN_INFO "3c529: found %s at slot %d\n",
                   el3_mca_adapter_names[mdev->index], slot + 1);
 
        /* claim the slot */
@@ -626,7 +633,7 @@ static int __init el3_mca_probe(struct device *device)
        irq = mca_device_transform_irq(mdev, irq);
        ioaddr = mca_device_transform_ioport(mdev, ioaddr);
        if (el3_debug > 2) {
-                       printk("3c529: irq %d  ioaddr 0x%x  ifport %d\n", irq, ioaddr, if_port);
+                       printk(KERN_DEBUG "3c529: irq %d  ioaddr 0x%x  ifport %d\n", irq, ioaddr, if_port);
        }
        EL3WINDOW(0);
        for (i = 0; i < 3; i++) {
@@ -641,13 +648,7 @@ static int __init el3_mca_probe(struct device *device)
 
        netdev_boot_setup_check(dev);
 
-       memcpy(dev->dev_addr, phys_addr, sizeof(phys_addr));
-       dev->base_addr = ioaddr;
-       dev->irq = irq;
-       dev->if_port = if_port;
-       lp = netdev_priv(dev);
-       lp->dev = device;
-       lp->type = EL3_MCA;
+       el3_dev_fill(dev, phys_addr, ioaddr, irq, if_port, EL3_MCA);
        device->driver_data = dev;
        err = el3_common_init(dev);
 
@@ -657,7 +658,7 @@ static int __init el3_mca_probe(struct device *device)
                return -ENOMEM;
        }
 
-       el3_cards++;
+       el3_devs[el3_cards++] = dev;
        return 0;
 }
 
@@ -666,7 +667,6 @@ static int __init el3_mca_probe(struct device *device)
 #ifdef CONFIG_EISA
 static int __init el3_eisa_probe (struct device *device)
 {
-       struct el3_private *lp;
        short i;
        int ioaddr, irq, if_port;
        u16 phys_addr[3];
@@ -678,7 +678,7 @@ static int __init el3_eisa_probe (struct device *device)
        edev = to_eisa_device (device);
        ioaddr = edev->base_addr;
 
-       if (!request_region(ioaddr, EL3_IO_EXTENT, "3c509"))
+       if (!request_region(ioaddr, EL3_IO_EXTENT, "3c579-eisa"))
                return -EBUSY;
 
        /* Change the register set to the configuration window 0. */
@@ -700,13 +700,7 @@ static int __init el3_eisa_probe (struct device *device)
 
        netdev_boot_setup_check(dev);
 
-       memcpy(dev->dev_addr, phys_addr, sizeof(phys_addr));
-       dev->base_addr = ioaddr;
-       dev->irq = irq;
-       dev->if_port = if_port;
-       lp = netdev_priv(dev);
-       lp->dev = device;
-       lp->type = EL3_EISA;
+       el3_dev_fill(dev, phys_addr, ioaddr, irq, if_port, EL3_EISA);
        eisa_set_drvdata (edev, dev);
        err = el3_common_init(dev);
 
@@ -716,12 +710,11 @@ static int __init el3_eisa_probe (struct device *device)
                return err;
        }
 
-       el3_cards++;
+       el3_devs[el3_cards++] = dev;
        return 0;
 }
 #endif
 
-#if defined(CONFIG_EISA) || defined(CONFIG_MCA)
 /* This remove works for all device types.
  *
  * The net dev must be stored in the driver_data field */
@@ -734,7 +727,6 @@ static int __devexit el3_device_remove (struct device *device)
        el3_common_remove (dev);
        return 0;
 }
-#endif
 
 /* Read a word from the EEPROM using the regular EEPROM access register.
    Assume that we are in register window zero.
@@ -749,7 +741,7 @@ static ushort read_eeprom(int ioaddr, int index)
 }
 
 /* Read a word from the EEPROM when in the ISA ID probe state. */
-static ushort __init id_read_eeprom(int index)
+static ushort id_read_eeprom(int index)
 {
        int bit, word = 0;
 
@@ -765,7 +757,7 @@ static ushort __init id_read_eeprom(int index)
                word = (word << 1) + (inb(id_port) & 0x01);
 
        if (el3_debug > 3)
-               printk("  3c509 EEPROM word %d %#4.4x.\n", index, word);
+               printk(KERN_DEBUG "  3c509 EEPROM word %d %#4.4x.\n", index, word);
 
        return word;
 }
@@ -787,13 +779,13 @@ el3_open(struct net_device *dev)
 
        EL3WINDOW(0);
        if (el3_debug > 3)
-               printk("%s: Opening, IRQ %d      status@%x %4.4x.\n", dev->name,
+               printk(KERN_DEBUG "%s: Opening, IRQ %d   status@%x %4.4x.\n", dev->name,
                           dev->irq, ioaddr + EL3_STATUS, inw(ioaddr + EL3_STATUS));
 
        el3_up(dev);
 
        if (el3_debug > 3)
-               printk("%s: Opened 3c509  IRQ %d  status %4.4x.\n",
+               printk(KERN_DEBUG "%s: Opened 3c509  IRQ %d  status %4.4x.\n",
                           dev->name, dev->irq, inw(ioaddr + EL3_STATUS));
 
        return 0;
@@ -806,7 +798,7 @@ el3_tx_timeout (struct net_device *dev)
        int ioaddr = dev->base_addr;
 
        /* Transmitter timeout, serious problems. */
-       printk("%s: transmit timed out, Tx_status %2.2x status %4.4x "
+       printk(KERN_WARNING "%s: transmit timed out, Tx_status %2.2x status %4.4x "
                   "Tx FIFO room %d.\n",
                   dev->name, inb(ioaddr + TX_STATUS), inw(ioaddr + EL3_STATUS),
                   inw(ioaddr + TX_FREE));
@@ -831,7 +823,7 @@ el3_start_xmit(struct sk_buff *skb, struct net_device *dev)
        lp->stats.tx_bytes += skb->len;
 
        if (el3_debug > 4) {
-               printk("%s: el3_start_xmit(length = %u) called, status %4.4x.\n",
+               printk(KERN_DEBUG "%s: el3_start_xmit(length = %u) called, status %4.4x.\n",
                           dev->name, skb->len, inw(ioaddr + EL3_STATUS));
        }
 #if 0
@@ -840,7 +832,7 @@ el3_start_xmit(struct sk_buff *skb, struct net_device *dev)
                ushort status = inw(ioaddr + EL3_STATUS);
                if (status & 0x0001             /* IRQ line active, missed one. */
                        && inw(ioaddr + EL3_STATUS) & 1) {                      /* Make sure. */
-                       printk("%s: Missed interrupt, status then %04x now %04x"
+                       printk(KERN_DEBUG "%s: Missed interrupt, status then %04x now %04x"
                                   "  Tx %2.2x Rx %4.4x.\n", dev->name, status,
                                   inw(ioaddr + EL3_STATUS), inb(ioaddr + TX_STATUS),
                                   inw(ioaddr + RX_STATUS));
@@ -914,7 +906,7 @@ el3_interrupt(int irq, void *dev_id)
 
        if (el3_debug > 4) {
                status = inw(ioaddr + EL3_STATUS);
-               printk("%s: interrupt, status %4.4x.\n", dev->name, status);
+               printk(KERN_DEBUG "%s: interrupt, status %4.4x.\n", dev->name, status);
        }
 
        while ((status = inw(ioaddr + EL3_STATUS)) &
@@ -925,7 +917,7 @@ el3_interrupt(int irq, void *dev_id)
 
                if (status & TxAvailable) {
                        if (el3_debug > 5)
-                               printk("        TX room bit was handled.\n");
+                               printk(KERN_DEBUG "     TX room bit was handled.\n");
                        /* There's room in the FIFO for a full-sized packet. */
                        outw(AckIntr | TxAvailable, ioaddr + EL3_CMD);
                        netif_wake_queue (dev);
@@ -964,7 +956,7 @@ el3_interrupt(int irq, void *dev_id)
                }
 
                if (--i < 0) {
-                       printk("%s: Infinite loop in interrupt, status %4.4x.\n",
+                       printk(KERN_ERR "%s: Infinite loop in interrupt, status %4.4x.\n",
                                   dev->name, status);
                        /* Clear all interrupts. */
                        outw(AckIntr | 0xFF, ioaddr + EL3_CMD);
@@ -975,7 +967,7 @@ el3_interrupt(int irq, void *dev_id)
        }
 
        if (el3_debug > 4) {
-               printk("%s: exiting interrupt, status %4.4x.\n", dev->name,
+               printk(KERN_DEBUG "%s: exiting interrupt, status %4.4x.\n", dev->name,
                           inw(ioaddr + EL3_STATUS));
        }
        spin_unlock(&lp->lock);
@@ -1450,7 +1442,7 @@ el3_up(struct net_device *dev)
 }
 
 /* Power Management support functions */
-#ifdef EL3_SUSPEND
+#ifdef CONFIG_PM
 
 static int
 el3_suspend(struct device *pdev, pm_message_t state)
@@ -1500,79 +1492,102 @@ el3_resume(struct device *pdev)
        return 0;
 }
 
-#endif /* EL3_SUSPEND */
-
-/* Parameters that may be passed into the module. */
-static int debug = -1;
-static int irq[] = {-1, -1, -1, -1, -1, -1, -1, -1};
-static int xcvr[] = {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1};
+#endif /* CONFIG_PM */
 
 module_param(debug,int, 0);
 module_param_array(irq, int, NULL, 0);
-module_param_array(xcvr, int, NULL, 0);
 module_param(max_interrupt_work, int, 0);
 MODULE_PARM_DESC(debug, "debug level (0-6)");
 MODULE_PARM_DESC(irq, "IRQ number(s) (assigned)");
-MODULE_PARM_DESC(xcvr,"transceiver(s) (0=internal, 1=external)");
 MODULE_PARM_DESC(max_interrupt_work, "maximum events handled per interrupt");
-#if defined(__ISAPNP__)
+#ifdef CONFIG_PNP
 module_param(nopnp, int, 0);
 MODULE_PARM_DESC(nopnp, "disable ISA PnP support (0-1)");
-MODULE_DEVICE_TABLE(isapnp, el3_isapnp_adapters);
-#endif /* __ISAPNP__ */
-MODULE_DESCRIPTION("3Com Etherlink III (3c509, 3c509B) ISA/PnP ethernet driver");
+#endif /* CONFIG_PNP */
+MODULE_DESCRIPTION("3Com Etherlink III (3c509, 3c509B, 3c529, 3c579) ethernet driver");
 MODULE_LICENSE("GPL");
 
 static int __init el3_init_module(void)
 {
        int ret = 0;
-       el3_cards = 0;
 
        if (debug >= 0)
                el3_debug = debug;
 
-       el3_root_dev = NULL;
-       while (el3_probe(el3_cards) == 0) {
-               if (irq[el3_cards] > 1)
-                       el3_root_dev->irq = irq[el3_cards];
-               if (xcvr[el3_cards] >= 0)
-                       el3_root_dev->if_port = xcvr[el3_cards];
-               el3_cards++;
+#ifdef CONFIG_PNP
+       if (!nopnp) {
+               ret = pnp_register_driver(&el3_pnp_driver);
+               if (!ret)
+                       pnp_registered = 1;
+       }
+#endif
+       /* Select an open I/O location at 0x1*0 to do ISA contention select. */
+       /* Start with 0x110 to avoid some sound cards.*/
+       for (id_port = 0x110 ; id_port < 0x200; id_port += 0x10) {
+               if (!request_region(id_port, 1, "3c509-control"))
+                       continue;
+               outb(0x00, id_port);
+               outb(0xff, id_port);
+               if (inb(id_port) & 0x01)
+                       break;
+               else
+                       release_region(id_port, 1);
+       }
+       if (id_port >= 0x200) {
+               id_port = 0;
+               printk(KERN_ERR "No I/O port available for 3c509 activation.\n");
+       } else {
+               ret = isa_register_driver(&el3_isa_driver, EL3_MAX_CARDS);
+               if (!ret)
+                       isa_registered = 1;
        }
-
 #ifdef CONFIG_EISA
        ret = eisa_driver_register(&el3_eisa_driver);
+       if (!ret)
+               eisa_registered = 1;
 #endif
 #ifdef CONFIG_MCA
-       {
-               int err = mca_register_driver(&el3_mca_driver);
-               if (ret == 0)
-                       ret = err;
-       }
+       ret = mca_register_driver(&el3_mca_driver);
+       if (!ret)
+               mca_registered = 1;
+#endif
+
+#ifdef CONFIG_PNP
+       if (pnp_registered)
+               ret = 0;
+#endif
+       if (isa_registered)
+               ret = 0;
+#ifdef CONFIG_EISA
+       if (eisa_registered)
+               ret = 0;
+#endif
+#ifdef CONFIG_MCA
+       if (mca_registered)
+               ret = 0;
 #endif
        return ret;
 }
 
 static void __exit el3_cleanup_module(void)
 {
-       struct net_device *next_dev;
-
-       while (el3_root_dev) {
-               struct el3_private *lp = netdev_priv(el3_root_dev);
-
-               next_dev = lp->next_dev;
-               el3_common_remove (el3_root_dev);
-               el3_root_dev = next_dev;
-       }
-
+#ifdef CONFIG_PNP
+       if (pnp_registered)
+               pnp_unregister_driver(&el3_pnp_driver);
+#endif
+       if (isa_registered)
+               isa_unregister_driver(&el3_isa_driver);
+       if (id_port)
+               release_region(id_port, 1);
 #ifdef CONFIG_EISA
-       eisa_driver_unregister (&el3_eisa_driver);
+       if (eisa_registered)
+               eisa_driver_unregister(&el3_eisa_driver);
 #endif
 #ifdef CONFIG_MCA
-       mca_unregister_driver(&el3_mca_driver);
+       if (mca_registered)
+               mca_unregister_driver(&el3_mca_driver);
 #endif
 }
 
 module_init (el3_init_module);
 module_exit (el3_cleanup_module);
-